Answer:
220
Step-by-step explanation:
If we lost 12% we still have 100 - 12 = 88% of the employees left. 88% can be written as 0.88. 0.88 * 250 = 220 employees left.
Please answer this correctly
Answer:
10-19 ⇒ 3
50-59 ⇒ 4
Answer:
# of ties # of racks
10-19 3
50-59 4
Step-by-step explanation:
Using the Stem and Leaf plot, our data is:
11, 12, 16
21
32, 34, 36, 37, 39
41, 45
51, 52, 53, 56
# of ties # of racks
10-19 3 (11, 12, 16)
50-59 4 (51, 52, 53, 56)
A battery with 20 percent of its full capacity is connected to a charger. Every minute that passes, an additional 5% , percent of its capacity is charged.
Answer:
y = 5x + 20
Step-by-step explanation:
The initial percent is 20.
Every minute, the percent goes up 5%, so the slope is 5.
So the equation of the line is y = 5x + 20.
Terrance is 3.5 years older than Stephanie. Stephanie is 22.5 years old.
Answer:
Terrance is 25.5
Step-by-step explanation:
Answer:
Hello There. The correct answer is 26
T = 3.5 + 22.5 = 26
Hope It Helps!
Please answer this correctly
Answer:
14.28 mm
Step-by-step explanation:
Find the circumference if it were a normal circle, then divide it by 4.
C = 2[tex]\pi[/tex]r
C = 2[tex]\pi[/tex](4)
C = 8[tex]\pi[/tex]
Divide it by 4
2[tex]\pi[/tex] + 4 + 4 = 14.28
Answer:
25.13 mm is the circumfrence, I believe.. Been a while since I've worked with this
Step-by-step explanation:
at the last minute deal Don and Mary booked a 7 day cruise for a total of $670. If the normal price for a couple is $1340, what discount percent did Don ans Mary recieve?
Answer:50%
Step-by-step explanation:670/1340 = 1/2 = 50%
Determine the percentage of all samples of three men that have mean brain weights within 0.1 kg of the population mean brain weight of 1.20 kg. Interpret your answer in terms of sampling error.
Answer:
Percentage of all samples of three men that have mean brain weights within 0.1 kg of the population mean brain weight of 1.20 kg = 78.5%
The sampling error is 0.08083, in terms of the sampling error, 78.5% of samples of three men will have mean brain weights within (1.24×sampling error) of the mean.
Step-by-step explanation:
Complete Question
According to one study, brain weights of men are normally distributed with mean = 1.20 kg and a standard deviation = 0.14 kg.
Determine the percentage of all samples of three men that have mean brain weights within 0.1 kg of the population mean brain weight of 1.20 kg. Interpret your answer in terms of sampling error.
Solution
The Central limit theorem allows us to say
The mean of sampling distribution is approximately equal to the population mean.
μₓ = μ = 1.20 kg
And the standard deviation of the sampling distribution is given as
σₓ = (σ/√N)
σ = population standard deviation = 0.14 kg
N = sample size = 3
σₓ = (0.14/√3) = 0.08083
Percentage of all samples of three men that have mean brain weights within 0.1 kg of the population mean brain weight of 1.20 kg, that is, percentage of all samples of three men with mean brain weights within 1.10 kg and 1.30 kg.
P(1.10 ≤ x ≤ 1.30)
We first normalize or standardize 1.10 and 1.30
The standardized score for any value is the value minus the mean then divided by the standard deviation.
For 1.10 kg
z = (x - μₓ)/σₓ = (1.10 - 1.20)/0.08083 = -1.24
For 1.30 kg
z = (x - μₓ)/σₓ = (1.30 - 1.20)/0.08083 = 1.24
To determine the required probability
P(1.10 ≤ x ≤ 1.30) = P(-1.24 ≤ z ≤ 1.24)
We'll use data from the normal distribution table for these probabilities
P(1.10 ≤ x ≤ 1.30) = P(-1.24 ≤ z ≤ 1.24)
= P(z ≤ 1.24) - P(z ≤ -1.24)
= 0.89251 - 0.10749
= 0.78502 = 78.502%
The sampling error is 0.08083, in terms of the sampling error, 78.5% of samples of three men will have mean brain weights within (1.24×sampling error) of the mean.
Hope this Helps!!!
I need help! Someone help me please
Answer:
4. 27
Step-by-step explanation:
11-10=1 which is <=16
15-10=5 which is <=16
26-10=16 which is <=16
27-10=17 which isn't <=16
Therefore 27 doesn't satisfy the inequality
Answer:
4. 27
Step-by-step explanation:
w - 10 ≤ 16
w≤16 + 10
w ≤ 26
11 ≤ 26
15≤26
26≤26
26≤ 27 False
The bottom of a ladder must be placed 3 ft. from a wall. The ladder is 12 feet long. How far above the ground does the ladder touch the wall? Round your answer to the nearest tenth.
Use the Pythagorean theorem to solve.
Height = sqrt(12^2 -3^2)
Height = sqrt(144-9)
Height = sqrt(135)
Height = 11.6189 = 11.6 feet
What’s the correct answer for this question?
Answer:
A.
Step-by-step explanation:
Since they are similar, hence taking proportionality,
CA/CB = d1/d2
Cross Multiplying
We get
CA × d2 = CB × d1
OR
d1×CB = d2 × CA
The length of a rectangular driveway is five feet more than three times the width. The area is 350ft2. Find the width and length of the driveway.
Answer:
width -- 10 ftlength -- 35 ftStep-by-step explanation:
We can let x represent the width. Then the length will be represented by (3x+5), a value 5 more than 3 times the width.
The area is the product of length and width, so is ...
A = (3x +5)(x) = 3x^2 +5x
To make the area 350, we can find the value of x from ...
3x^2 +5x = 350
This can be solved a number of ways. One of them is "completing the square".
3(x^2 +5/3x) = 350
We choose to divide by 3 and add the square of half the x-coefficient.
x^2 +5/3x +(5/6)^2 = (350/3) + (5/6)^2
(x +5/6)^2 = 4225/36 . . . . simplify
x +5/6 = ±√(4225/36) = ±10 5/6 . . . . take the square root
x = 10 or -11 2/3 . . . . subtract 5/6
The positive solution is the one of interest: x = 10.
The driveway is 10 ft wide and 35 ft long.
|x+12| =-9
Pls help!!!!
Answer:
x=-21
Step-by-step explanation:
x+12=-9
minus twelve on both sides
-9-12 equals -21
x=-21
The article "A Shovel with a perforated blade reduces energy expenditure required for digging wet clay" (Human Factors, 2010:492-502) reported on an experiment in which each of 13 workers was provided with both a conventional shovel and a shovel whose blade was perforated with small holes. The authors of the cited article provided the following data on stable energy expenditure (measured in kilocalories per kg of subject per pounds of clay):
1 2 3 4 5 6 7 8 9 10 11 12 13 Worker Conventional 0.0011 0.0014 0.0018 0.0022 0.001 0.0016 0.0028 0.002 0.0015 0.0023 0.0017 0.002 0.0014 Perforated 0.0011 0.001 0.0019 0.0013 0.0011 0.0017 0.0024 0.002 0.0013 0.0017 0.002 0.0013 0.0013 Carry out a test of hypotheses at significance level 0.05 to see whether the true average energy expenditure using the conventional shovel exceeds that using the perforated shovel. (hint: this is a paired-design!). Make sure to calculate a p-value!
Answer:
Step-by-step explanation:
Corresponding true average energy expenditure of shovel with conventional blade and true average energy expenditure of shovel with perforated blades form matched pairs.
The data for the test are the differences between the true average energy expenditures of the shovels.
μd = true average energy expenditure of shovel with conventional blade minus true average energy expenditure of shovel with perforated blades.
Conventional perforated diff
0.0011 0.0011 0
0.0014 0.0010 0.0004
0.0018 0.0019 -0.0001
0.0022 0.0013 0.0009
0.0010 0.0011 -0.0001
0.0016 0.0017 -0.0001
0.0028 0.0024 0.0004
0.0020 0.002 0
0.0015 0.0013 0.0002
0.0023 0.0017 0.0006
0.0017 0.002 -0.0003
0.0020 0.0013 0.0007
0.0014 0.0013 0.0001
Sample mean, xd
= (0 + 0.0004 - 0.0001 + 0.0009 - 0.0001 - 0.0001 + 0.0004 + 0 + 0.0002 + 0.0006 - 0.0003 + 0.0007 + 0.0001)/13 = 0.0002077
xd = 0.0002077
Standard deviation = √(summation(x - mean)²/n
n = 13
Summation(x - mean)² = (0 - 0.0002077)^2 + (0.0004 - 0.0002077)^2 + (- 0.0001 - 0.0002077)^2+ (0.0009 - 0.0002077)^2 + (- 0.0001 - 0.0002077)^2 + ( - 0.0001 - 0.0002077)^2 + (0.0004 - 0.0002077)^2 + (0 - 0.0002077)^2 + (0.0002 - 0.0002077)^2 + (0.0006 - 0.0002077)^2 + (- 0.0003 - 0.0002077)^2 + (0.0007 - 0.0002077)^2 + (0.0001 - 0.0002077)^2 = 0.00000158923
Standard deviation = √(0.00000158923/13
sd = 0.00035
For the null hypothesis
H0: μd ≥ 0
For the alternative hypothesis
H1: μd < 0
The distribution is a students t. Therefore, degree of freedom, df = n - 1 = 13 - 1 = 12
The formula for determining the test statistic is
t = (xd - μd)/(sd/√n)
t = (0.0002077 - 0)/(0.00035/√13)
t = 2.14
We would determine the probability value by using the t test calculator.
p = 0.027
Since alpha, 0.05 > than the p value, 0.027, then we would reject the null hypothesis. Therefore, at 5% significance level, we can conclude that the true average energy expenditure using the conventional shovel does not exceed that using the perforated shovel.
Write an equation of a line that contains the following two points in slope intercept form
(-2,4) (3,-1)
Answer:
y = -x + 2
Step-by-step explanation:
The slope intercept form equation of this line can be written like this :
y = my + p ; where m is the slope and p is the y intercept.
[tex]m = \frac{-1-4}{3-(-2)} = \frac{-5}{5} =-1[/tex]
then the equation becomes y = -x + p
(-2,4) is a point of the line means 4 = -(-2) + p
then p = 4 - 2 = 2
finally, y = -x + 2
What’s the correct answer for this question?
Answer:
B:
Step-by-step explanation:
Measure of ARC AFB is 180°
Why?
This is because AB is a diameter.
a ford truck enters a highway and travles uniform speed of 50 mph. half an hour later a jaguar enters the highway at the same junction and heads in the same direction at 55 mph. how long after the ford enters the highway does the jaguard catch up
Answer:
5.5 hours
Step-by-step explanation:
We have that the distance is given by:
d = v * t = 50 mph * 1/2 h = 25 miles
The relative speed is given by:
vr = 55 mph - 50 mph = 5 mph
Now the time required to reach
would come being:
t = t '+ d / vr
we know that t '= 1/2 h, replacing:
t = 1/2 h + 25 mi / 5 mph
t = 1/2 h + 5 h
t = 5.5 h
Therefore, the required time is 5.5 hours.
Construct the indicated confidence interval for the difference between the two population means. Assume that the two samples are independent simple random samples selected from normally distributed populations. Do not assume that the population standard deviations are equal.
A paint manufacturer wished to compare the drying times of two different types of paint. Independent simple random samples of 11 cans of type A and 9 cans of type B were selected and applied to similar surfaces. The drying times, in hours, were recorded. The summary statistics are as follows.
Type A
x-bar1 = 75.7 hrs.
s1 = 4.5 hrs.
n1 = 11
Type B
x-bar2 = 64.3 hrs.
s2 = 5.1 hrs.
n2 = 9
Construct a 98% confidence interval for the difference for the mean drying time between paint A and paint B.
A. 6.08 hrs < μ1 - μ2 < 16.72 hrs
B. 5.85 hrs < μ1 - μ2 < 16.95 hrs
C. 5.78 hrs < μ1 - μ2 < 17.02 hrs
D. 5.92 hrs < μ1 - μ2 < 16.88 hrs
Answer:
Step-by-step explanation:
The formula for determining the confidence interval for the difference of two population means is expressed as
Confidence interval = (x1 - x2) ± z√(s²/n1 + s2²/n2)
Where
x1 = sample mean of type A paint
x2 = sample mean of type B paint
s1 = sample standard deviation type A paint
s2 = sample standard for type B paint
n1 = number of samples of type A paint
n2 = number of samples of type B paint
From the information given,
x1 = 75.7
s1 = 4.5
n1 = 11
x2 = 64.3
s2 = 5.1
n2 = 9
x1 - x2 = 75.7 - 64.3 = 11.4
√(s1²/n1 + s2²/n2) = √(4.5²/11 + 5.1²/9) = √4.709
Degree of freedom = (n1 - 1) + (n2 - 1)
df = (11 - 1) + (9 - 1) = 18
For the 98% confidence interval, the z score from the t distribution table is 2.552
Margin of error = 2.552√4.709 = 5.55
The upper boundary for the confidence interval is
11.4 + 5.55 = 16.95 hours
The lower boundary for the confidence interval is
11.4 - 5.55 = 5.85 hours
The correct option is
B. 5.85 hrs < μ1 - μ2 < 16.95 hrs
Simplify the answer pls
Answer:
Step-by-step explanation:
24/3 - 4
8 - 4 = 4
Which is true about the polynomial-8m3+11m
Answer:
“It is a binomial with a degree of 3”
Step-by-step explanation:
Since it has just two different coefficients, it would be considered “binomial” for that reason. As you can notice, the highest degree is 3. So match those up and the correct answer would be the second choice “It is a binomial with a degree of 3”
Answer:
B
Step-by-step explanation:
ps help me with this its urgent❤
Use the properties of exponents to simplify the expression. (photo attached)
Answer:
y^6/x^2
Step-by-step explanation:
(y^3/2x^-1/2)^4= y^(4*3/2)x^(-1/2*4)=y^6x^-2= y^6/x^2
Need Help!...anyone!
(a)
[tex] \sqrt[5]{ {x}^{3} } [/tex]
(b)
[tex] \sqrt[8]{x} [/tex]
(c)
[tex] \sqrt[3]{ {x}^{5} } [/tex]
(d)
[tex] \sqrt{ {x}^{3} } [/tex]
The value of m compared to the standard is
1/1000
1000
1/100
10
ASAPPPP
I HAVE AND IMAGE BELOW
Answer:
#1
Step-by-step explanation:
The associative property of addition states that we can "flip" two expressions that are being added. Therefore, our answer is the first one because it can be rewritten as 3x + (-7y) which then is equivalent to -7y + 3x.
The fraction of students ages 10 to 17 who favor math or science is
Answer:
So if 17/25 of the students like math, science, and art and 3/20 of the students like art only. We first need to find common demoninator. 68/100 and for the second one 15/100. Subtract them both
68-15 = 53/100 of the students factor math, and science or 53%
Find the SURFACE AREA of this composite solid.
FINDING THE SURFACE AREA OF A COMPOSITE SOLID
About "Finding the surface area of a composite solid"
Finding the surface area of a composite solid :
A composite solid is made up of two or more solid figures.
To find the surface area of a composite solid, find the surface area of each figure. Subtract any area not on the surface.
Finding the surface area of a composite solid - Examples
Example 1 :
Daniel built the birdhouse shown below. What was the surface area of the birdhouse before the hole was drilled ?
Solution :
Step 1 :
Identify the important information.
• The top is a triangular prism with h = 24 cm. The base is a triangle with height 8 cm and base 30 cm.
• The bottom is a rectangular prism with h = 18 cm. The base is a 30 cm by 24 cm rectangle.
• One face of each prism is not on the surface of the figure.
Step 2 :
Find the surface area of each prism.
Add the areas. Subtract the areas of the parts not on the surface.
Step 3 :
Find the area of the triangular prism.
Perimeter = 17 + 17 + 30 = 64 cm
Base area = (1/2)(30)(8) = 120 sq.cm
Surface area = Ph + 2B
Surface area = 64(24) + 2(120)
Surface area = 1,776 sq.cm
Step 4 :
Find the area of the rectangular prism.
Perimeter = 2(30) + 2(24) = 108 cm
Base area = 30(24) = 720 sq.cm
Surface area = Ph + 2B
Surface area = 108(18) + 2(720)
Surface area = 3,384 sq.cm
Step 5 :
Add. Then subtract twice the areas of the parts not on the surface.
Surface area = 1,776 + 3,384 - 2(720) = 3,720 sq.cm
The surface area before the hole was drilled was 3,720 sq.cm.
The surface area before the hole was drilled was; 3,720 sq.cm.
What is composite solid?A composite solid is made up of two or more solid figures.
To determine the surface area of a composite solid, find the surface area of each figure. Subtract any area not on the surface.
Given that the top is a triangular prism with h = 24 cm. The base is a triangle with height 8 cm and base 30 cm.
The bottom is a rectangular prism with h = 18 cm.
The base is a 30 cm x 24 cm rectangle.
One face of each prism is not on the surface of the figure.
Then the surface area of each prism.
Add the areas. Subtract the areas of the parts not on the surface.
The area of the triangular prism.
Perimeter = 17 + 17 + 30 = 64 cm
Base area = (1/2)(30)(8) = 120 sq.cm
Surface area = Ph + 2B
Surface area = 64(24) + 2(120)
Surface area = 1,776 sq.cm
Now the area of the rectangular prism.
Perimeter = 2(30) + 2(24) = 108 cm
Base area = 30(24) = 720 sq.cm
Surface area = Ph + 2B
Surface area = 108(18) + 2(720)
Surface area = 3,384 sq.cm
Now,
Surface area = 1,776 + 3,384 - 2(720) = 3,720 sq.cm
Learn more about the area;
https://brainly.com/question/1658516
#SPJ2
5+7.(9-4)
5+7=11
11×5=55
Answer: itz 605
Step-by-step explanation:
what are the answers to the following quadratic equation:
x^2-4x-12
Answer:
6 and -2
Step-by-step explanation:
x^2-4x-12
set up equal to zero
x^2-4x-12=0
lets factor:
(x-6)(x+2)=0
x-6=0
x=6
or
x+2=0
x=-2
Answer:
x=6 x=-2
Step-by-step explanation:
x^2-4x-12 = 0
Factor
What two numbers multiply to -12 and add to -4
-6*2 = -12
-6+2 = -4
(x-6)(x+2) =0
Using the zero product property
(x-6) =0 x+2 = 0
x=6 x=-2
ASAP! GIVING BRAINLIEST! Please read the question THEN answer CORRECTLY! NO guessing. I say no guessing because people usually guess on my questions.
Answer:
its b I belive
Step-by-step explanation:
Answer:
The answer is B.
Step-by-step explanation:
In order to find (f-g)(x), you have to subtract g(x) from f(x) :
[tex]f(x) = {3}^{x} + 10[/tex]
[tex]g(x) = 2x - 4[/tex]
[tex](f - g)(x) = {3}^{x} + 10 - 2x - ( - 4)[/tex]
[tex](f - g)(x) = {3}^{x} + 10 - 2x + 4[/tex]
[tex](f - g)(x) = {3}^{x} - 2x + 14[/tex]
A 120-gallons (gal)tank initially contains 90 lb of a salt dissolved in 90 gal of water. Brine containing 2 lb/gal of salt flows into the tank at the rate of 4gal/min. The mixture is kept uniform by stirring, and the stirred mixture flows out at the rate of 3gal/min. How much salt does the tank contain when it is full
Answer:
The tank will contain 202 Ib of salt when it's full.
Step-by-step explanation
To find the amount of salt in the tank at time t= x(t)
If x(0)= 90Ib
To find the volume of the tank at time t
V(t)= 90+(4-3)t=90+t gal
Other solutions are found attached
Please answer this correctly
Answer:
1.5 meters
Step-by-step explanation:
The formula for the area of a trapezoid is h * (a+b)/2, where a is the first base and b is the second base. Now, we can work backwards to determine the height of the trapezoid:
3.75=h*(1.7+3.3)/2
3.75=h*2.5
h=3.75/2.5=1.5
Hope this helps!
Answer:
Step-by-step explanation:
use the formula and rearrange for h.
1/2 x h x (a + b) = A
1/2 x (1.7 + 3.3) x h = 3.75
2.5 x h = 3.75
h = 1.5
hope this helps! :)
1/4+3/8+1/2+5/8+7/8
Answer: 1/4+3/8+1/2+5/8+7/8
= 21/8
Hope this helps :)))
Answer:
21/8
Step-by-step explanation:
