Strychnine, a deadly poison, has a molecular mass of 334 g/mol and a percentage composition of 75.45% carbon, 6.59% hydrogen, 8.38% nitrogen, and the balance oxygen. What is the molecular formula of strychnine?

The reaction C₆H₅COOH(aq) + C₆H₅NH₂(aq) ⇌ C₆H₅COO⁻(aq) + C₆H₅NH₃⁺(aq) has an equilibrium constant of 0.3698.

The equilibrium constant (Kb) for the reaction can be calculated using the Ka and Kb values of the reactants and the equation:

Kw = Ka x Kb

where Kw = ion product constant of water (1.0 x 10⁻¹⁴ at 25°C).

Calculate the Kb value for aniline:

Kb = Kw/Ka = (1.0 x 10⁻¹⁴)/(4.3 x 10⁻¹⁰) = 2.33 x 10⁻⁵

Use the Kb value for aniline and the Ka value for benzoic acid to calculate the equilibrium constant (K) for the reaction:

K = Kb/Ka = (2.33 x 10⁻⁵)/(6.3 x 10⁻⁵) = 0.3698

Therefore, the equilibrium constant for the reaction C₆H₅COOH(aq) + C₆H₅NH₂(aq) ⇌ C₆H₅COO⁻(aq) + C₆H₅NH₃⁺(aq) is 0.3698.

Find out more on equilibrium constant here: https://brainly.com/question/19340344

#SPJ1

1. The long-haired cat in the P generation is a purebred. This is because it has two copies of the recessive allele (hh) responsible for long hair.

2. The short-haired cat in the P generation is a hybrid. We know this because the offspring include both short-haired (Hh) and long-haired (hh) cats, indicating that the short-haired parent must have one dominant (H) and one recessive (h) allele (Hh).

3. If the short-haired cat in the P generation were purebred (HH), all offspring would have short hair, as they would inherit one dominant allele (H) from the short-haired parent and one recessive allele (h) from the long-haired parent, resulting in Hh offspring.

4. The black horse is a hybrid. Since the cross between a black horse (B...) and a brown horse (bb) produced a brown foal (bb), the black horse must carry one dominant allele (B) and one recessive allele (b) - making it a hybrid (Bb).

5. To determine whether a guinea pig with a smooth coat (S...) is a hybrid or a purebred, perform a test cross by mating it with a guinea pig with a rough coat (ss). If all offspring have smooth coats (Ss), the smooth-coated guinea pig is likely purebred (SS). If any offspring have a rough coat (ss), the smooth-coated guinea pig is a hybrid (Ss).

A dominant allele is a variant of a gene that expresses its trait even when only one copy is present in an individual's genotype. In other words, it masks the effect of another variant (allele) of the same gene when they are together.

A recessive allele is a variant of a gene that only expresses its trait when two copies are present in an individual's genotype. The trait associated with the recessive allele is "masked" by the presence of a dominant allele, and it will only be expressed if both copies of the gene are recessive.

The above answer is based on the question below;

In a test cross, the organism with the trait controlled by a dominant allele is crossed with an organism with a trait controlled by a recessive allele. If all offspring have the trait controlled by the dominant allele, then the parent is probably a purebred. If any offspring has the recessive strait, then the dominant parent is a hybrid.

1. Is the long-haired cat in the P generation a hybrid or a purebred? Explain your answer.

2. Is the short-haired cat in the P generation a hybrid or a purebred? Explain your answer.

3. If the short-haired cat in the P generation were purebred, what would you expect the offspring to look like?

4. In horses, the allele for a black coat (B) is dominant over the allele for a brown coat (b). A cross between a black horse and a brown horse produces a brown foal. Is the black horse a hybrid or a purebred? Explain.

5. In guinea pigs, the allele for a smooth coat (S) is dominant over the allele for a rough coat (s). Explain how you could find out whether a

guinea pig with a smooth coat is a hybrid or a purebred.

H= Short hair

h = Long hair

Find more exercises on dominant allele;

https://brainly.com/question/14053639

#SPJ1

The pressure of hydrogen gas formed is 709.5 mmHg.

Partial pressure is the pressure exerted by a single gas component in a mixture of gases, assuming all other gases are held constant.

In this case, the hydrogen gas is formed by a chemical reaction.

To calculate the partial pressure of hydrogen gas, we need to subtract the vapor pressure of water from the total pressure of the gas collected.

The vapor pressure of water at 18.0 °C is 15.5 mmHg.

Therefore, the partial pressure of hydrogen gas can be calculated as:

Partial pressure of hydrogen gas = Total pressure - Vapor pressure of water

Partial pressure of hydrogen gas = 725.0 mmHg - 15.5 mmHg = 709.5 mmHg

To know more about hydrogen gas here

brainly.com/question/12494649

#SPJ1

The intital common temperature of copper and water is 9.5°C, under the condition that 10.0 g of ice at -10.0C is placed into 300.0 g of water in a 200.0-g copper calorimeter.

Now to evaluate the initial common temperature of the water and copper calorimeter, we have to apply the formula
m1c1(Tk - Ti) + m2c2(Tk - Ti)
= mcopperccopper(Tk - Ti)

Here,
m1 = mass of water,
c1 =specific heat capacity of water,
m2 = mass of copper calorimeter,
c2 = specific heat capacity of copper calorimeter, mcopper = mass of copper block
ccopper =specific heat capacity of copper.

Here, this equation to evaluate Ti
Ti = (m1c1Tk + m2c2Tk - mcopperccopperTk - m1c1Ti - m2c2Ti) / (m1c1 + m2c2 - mcopperccopper)

Staging the given values into this equation
Ti = (-300.0 g)(4.18 J/g°C)(18.0°C) + (200.0 g)(0.385 J/g°C)(18.0°C) + (10.0 g)(0.385 J/g°C)(18.0°C) / [(300.0 g)(4.18 J/g°C) + (200.0 g)(0.385 J/g°C) - (10.0 g)(0.385 J/g°C)]
Ti = 9.5°C

Hence, the initial common temperature of the water and copper calorimeter was 9.5°C.
To learn more about calorimeter
https://brainly.com/question/30532154
#SPJ1

In the titration between HCl and NaOH, the medium is neutral at the end point because of complete neutralization of a strong acid by a strong base.

Neutralization is a chemical reaction in which acid and base react to form salt and water. Hydrogen (H⁺) ions and hydroxide (OH⁻ ions) react with each other to form water.

The strong acid and strong base neutralization have a pH value of 7.

The beaker gets warm which indicates that the reaction between acid and base is an exothermic reaction releasing heat energy into the surroundings.

Learn more about Neutralization, here:

https://brainly.com/question/15347368

#SPJ1

a) We need 32.6 liters of [tex]O_2[/tex] at 41 °C and 0.307 atm to burn 8.57 L of [tex]C_2H_6[/tex]  at 41 °C and 0.307 atm

b) 18.5 liters of [tex]CO_2[/tex] will be produced at 41 °C and 0.307 atm.

To answer this question, we will use the ideal gas law, which relates pressure, volume, temperature, and number of moles of a gas. We will also use stoichiometry to relate the amount of ethane and oxygen consumed and the amount of carbon dioxide and water produced.

(a) To determine how many liters of [tex]O_2[/tex] are needed to burn 8.57 L of [tex]C_2H_6[/tex] , we first need to convert the volume of ethane to moles using the ideal gas law:
n([tex]C_2H_6[/tex] ) = PV/RT = (0.307 atm)(8.57 L)/(0.0821 L·atm/mol·K)(314 K) = 0.342 mol

From the balanced equation, we see that 2 moles of [tex]C_2H_6[/tex] react with 7 moles of [tex]O_2[/tex] . Therefore, the amount of [tex]O_2[/tex] needed is:
n([tex]O_2[/tex]) = (7/2) n([tex]C_2H_6[/tex]) = (7/2)(0.342 mol) = 1.20 mol

Now we can use the ideal gas law again to calculate the volume of [tex]O_2[/tex] needed:
V([tex]O_2[/tex] ) = n([tex]O_2[/tex])RT/P = (1.20 mol)(0.0821 L·atm/mol·K)(314 K)/(0.307 atm) = 32.6 L

Therefore, 32.6 liters of [tex]O_2[/tex] are needed to burn 8.57 L of [tex]C_2H_6[/tex]  at at 41 °C and 0.307 atm

(b) From the balanced equation, we see that 2 moles of [tex]C_2H_6[/tex] produce 4 moles of [tex]CO_2[/tex] . Therefore, the amount of [tex]CO_2[/tex] produced is:

n([tex]CO_2[/tex]) = 2 n([tex]C_2H_6[/tex]) = 2(0.342 mol) = 0.684 mol

V([tex]CO_2[/tex]) = n([tex]CO_2[/tex])RT/P = (0.684 mol)(0.0821 L·atm/mol·K)(314 K)/(0.307 atm) = 18.5 L

Therefore, 18.5 liters of [tex]CO_2[/tex] at 41 °C and 0.307 atm will be produced.

For more question on ideal gas law

https://brainly.com/question/27870704

#SPJ11

3.09 g is the theoretical mass of AlBr₃(s) produced.

The following dimensional analysis setup could be used to determine the theoretical mass of AlBr₃(s) (molecular mass = 266.69 g/mol) produced based on reacting 84.2 g of a 0.005 mol/L solution of Br₂(l) (density=1019 g/L) with excess Al(s) as described in the following equation:

3Br₂(l) + 2Al(s) → 2AIBr₃(s)

The dimensional analysis setup to calculate the mass of AlBr₃(s) produced is as follows:

84.2 g Br₂ (l) × (1 L solution / 1019 g Br₂(l)) × (0.005 mol Br₂(l) / 1 L solution) × (2 mol AlBr₃(s) / 3 mol Br₂(l)) × (266.60 g AlBr₃(s) / 1 mol AlBr₃(s)) = 3.09 g AlBr₃(s)

Therefore, the theoretical mass of AlBr₃(s) produced is 3.09 g.

Find out more on dimensional analysis here: https://brainly.com/question/24514347

#SPJ1

The ideal gas law states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin. Rearranging the equation, we get:

n = PV/RT

For the container of helium:

n = (201.6 kPa) x (3.9 L) / [(8.31 J/mol*K) x (298 K)] = 0.0688 mol

Now, using the same equation for the container of xenon:

n = (201.6 kPa) x (3.9 L) / [(8.31 J/mol*K) x (298 K)] = 0.0688 mol

Therefore, there are also 0.0688 moles of xenon gas present in the container.

The partial pressure of each gas are:

First, we shall determine the mole of 8.00 g of methane, CH₄ and 18.0 g of ethane, C₂H₆. Details below:

For methane, CH₄

Mole = mass / molar mass

Mole of CH₄ = 8 / 16

Mole of CH₄ = 0.5 mole

For ethane, C₂H₆

Mole = mass / molar mass

Mole of C₂H₆ = 18 / 30

Mole of C₂H₆ = 0.6 mole

Next, we shall determine the total mole. Details below:

PV = nRT

3.70 × 10 = n × 0.0821 × 293

Divide both sides by (0.0821 × 293)

n = (3.70 × 10) / (0.0821 × 293)

n = 1.52 mole

Finally, we shall determine the partial pressure of each gas. Details below:

For methane, CH₄

Partial pressure = (Mole / total mole) × total pressure

Partial pressure of CH₄ = (0.5 / 1.52) × 3.70

Partial pressure of CH₄ = 1.22 atm

For ethane, C₂H₆

Partial pressure = (Mole / total mole) × total pressure

Partial pressure of C₂H₆ = (0.6 / 1.52) × 3.70

Partial pressure of C₂H₆ = 1.46 atm

For propane, C₃H₈

Partial pressure of C₃H₈ = Total pressure - (Partial pressure of CH₄ + Partial pressure of C₂H₆)

Partial pressure of C₃H₈ = 3.7 - (1.22 + 1.46)

Partial pressure of C₃H₈ = 1.02 atm

Learn more about partial pressure:

https://brainly.com/question/15577259

#SPJ1

We would need about 16 hydrogen atoms so that we can convert the compound to a saturated fat.

In animal products like meat and dairy, saturated fat is a form of dietary fat that is normally solid at room temperature. It is known as being "saturated" because each molecule of fat has the most hydrogen atoms possible, giving it a stable structure.

We can see this by counting the number of double bonds in the fat and there are eight of them so sixteen hydrogen atoms are needed for saturation.

Learn more about saturated fat:https://brainly.com/question/29816448

#SPJ1

Answer:

A. setting standards and governing the cleanliness of water used by Americans

Explanation:

The responsibilities of the Environmental Protection Agency (EPA) is to make sure that:

Answer:

Ans: 8.9 NaCl

Explanation:

Ocean water contains 3.5 nacl by mass how much salt can be obtained from 254 g of seawater

Question: Ocean water contains 3.5% NaCl by mass. How much salt can be obtained from 254g of seawater?

Answer:

Na < Al < Mg < S < Cl

Explanation:

Sodium has the smallest ionization energy because it wants to lose an electron as an alkali metal.

Aluminum has the second smallest because losing an electron would leave it with just a full s orbital.

Magnesium has the third smallest because although it's removing an electron from a full s orbital, it has less protons than sulfur and chlorine to keep the electron in the shell.

Sulfur has the second largest because it has more protons to pull at the electrons.

Chlorine has the largest ionization energy because it really wants an electron to fill the p orbital. Due to its number of protons, the element is also very small and it will be difficult to remove an electron.

The rates of reaction for the trial 1 is 8.22 x 10⁻² M⁻² s⁻¹ and 1.10 M⁻² s⁻¹ for traila 2 and 3

To find the reaction rate with respect to U and S, keep the concentration of W constant and vary the concentrations of U and S while measuring the rate.

Assuming the concentration of W in all three trials is constant, choose trial 1 as the reference trial and calculate the rate constant (k) for the reaction with respect to U and S.

For trial 1:

[W] = 0.13 M

Rate = 4.72 x 10⁻⁴ M/s

For trial 2:

[W] = 0.13 M

Rate = 1.18 x 10⁻² M/s

From the equation rate = k[U][S], set up the following ratio of rates:

Rate2/Rate1 = (k[U]2[S]2)/(k[U]1[S]1)

Simplifying:

k = (Rate2/Rate1) x (1/[U]2) x (1/[S]2) x ([U]1) x ([S]1)

Substituting the values from trials 1 and 2:

k = (1.18 x 10⁻² M/s) / (4.72 x 10⁻⁴ M/s) x (1/0.65 M) x (1/1 M) x (0.13 M) x (1 M)

k = 8.22 x 10⁻²M⁻² s⁻¹

Similarly, for trial 3:

[W] = 0.13 M

Rate = 2.95 x 10⁻¹ M/s

Using trial 1 as the reference trial again, calculate the rate constant (k) for the reaction with respect to U and S:

k = (Rate3/Rate1) x (1/[U]3) x (1/[S]3) x ([U]1) x ([S]1)

k = (2.95 x 10⁻¹ M/s) / (4.72 x 10⁻⁴ M/s) x (1/3.25 M) x (1/1 M) x (0.13 M) x (1 M)

k = 1.10 M⁻² s⁻¹

Therefore, the reaction rate with respect to U and S is given by the equation:

rate = k[U][S]

where k = 8.22 x 10⁻² M⁻² s⁻¹ and 1.10 M⁻² s⁻¹ for trials 2 and 3, respectively.

Find out more on reaction rate here: https://brainly.com/question/24795637

#SPJ1

Fusion and fission are two types of nuclear reactions that involve changes in the atomic nucleus of an atom.

Fusion is the process of combining two light atomic nuclei to form a heavier nucleus. This process releases a large amount of energy in the form of heat and light. Fusion occurs under high temperatures and pressures, similar to those found in the core of a star. A specific example of fusion is the fusion of two hydrogen nuclei to form helium, which is the process that powers the sun. In this reaction, the two hydrogen nuclei (protons) combine to form a helium nucleus, which consists of two protons and two neutrons. This process releases a large amount of energy in the form of gamma rays and other high-energy particles.

Fission, on the other hand, is the process of splitting a heavy atomic nucleus into two or more smaller nuclei. This process also releases a large amount of energy in the form of heat and radiation. Fission is used in nuclear power plants to generate electricity. A specific example of fission is the splitting of a uranium-235 nucleus into two smaller nuclei, such as krypton-92 and barium-141, and several neutrons. This reaction also releases a large amount of energy in the form of gamma rays and other high-energy particles.

In the case of the element Si-32, fusion and fission reactions can occur. For example, Si-32 can undergo fusion with hydrogen to form a heavier element, such as sulfur or argon. On the other hand, Si-32 can also undergo fission, where it can split into smaller nuclei, such as magnesium and calcium. The specific details of these reactions, including the amount of energy released and the products formed, depend on the specific conditions and the reactants involved.

Answer:

Explanation:

Structural Levels of the body:
a. Characteristics of Living Things: Living things exhibit certain characteristics such as the ability to grow, reproduce, respond to stimuli, and maintain homeostasis.
b. Cell Specialization: Cells in the body are specialized to perform different functions such as muscle cells for movement, nerve cells for communication, and red blood cells for carrying oxygen.

Skeletal and Muscular System:
a. The Skeletal System: The skeletal system provides support, protection, and movement for the body. It is composed of bones, cartilage, and ligaments.
b. The Muscular System: The muscular system allows movement of the body and helps in maintaining posture. It is composed of muscles, tendons, and ligaments.

Food and Nutrition:
a. Food Pyramid: The food pyramid is a guide for healthy eating that emphasizes the importance of a balanced diet including fruits, vegetables, grains, protein, and dairy.

Digestive System:
a. Enzymes: Enzymes are proteins that help in breaking down food into simpler forms for absorption in the body. They are produced by different organs in the digestive system such as the pancreas, stomach, and small intestine.

Circulatory System:
a. Circulation: The circulatory system is responsible for the transport of blood and nutrients throughout the body. It consists of the heart, blood vessels, and blood.
b. Heart: The heart is a muscular organ that pumps blood to different parts of the body.
c. Blood Vessels: Blood vessels include arteries, veins, and capillaries that transport blood to and from the heart.

Respiratory System:
a. Respiration: Respiration is the process of inhaling oxygen and exhaling carbon dioxide. The respiratory system is responsible for this process and includes the nose, trachea, bronchi, and lungs.

When an equilibrium system is put under stress, Le Chatelier's principle can be used to forecast changes in equilibrium concentrations.

Thus, The adjustments required to reach equilibrium might not be as obvious if we have a mixture of reactants and products that have not yet reached equilibrium.

In this situation, we can compare the Q and K values for the system to forecast changes.

By adding or withdrawing one or more of the reactants or products, an equilibrium chemical system can be momentarily moved out of equilibrium. After that, additional adjustments are made to the reactant and product concentrations in order to bring the system back to equilibrium.

Thus, When an equilibrium system is put under stress, Le Chatelier's principle can be used to forecast changes in equilibrium concentrations.

Learn more about Equilibirium, refer to the link:

https://brainly.com/question/30147602

#SPJ1

The total volume of the solution is 300 mL.

To calculate the total volume of the solution, we simply add the volumes of the ethanol and water together:

The total volume of solution = volume of ethanol + volume of water

= 100 mL + 200 mL

= 300 mL

Therefore, the total volume of the solution is 300 mL.

When two or more compounds are combined to form a solution, the substance present in the smallest amount is known as the solute, and the material present in the largest amount and which dissolves is known as the solvent.

The solute, which can be a solid, liquid, or gas, dissolves in the solvent, which is often a liquid.

In this scenario, 100 mL of ethanol and 200 mL of water are combined to make the solution. The solute in this solution is ethanol, a colorless liquid. Water is a polar solvent that can dissolve a wide range of compounds, including ethanol. When ethanol and water are combined, they dissolve and form a homogeneous mixture.

learn more about ethanol here

https://brainly.com/question/20814130

#SPJ1

Answer:

1.8mol

Explanation:

this is the ans but in the option there is

not give

To calculate the concentration resulting from the dilution of 500.0 mL of 4.267 M to a volume of 1.85 L, we can use the equation:
M1V1 = M2V2
where M1 is the initial concentration, V1 is the initial volume, M2 is the final concentration, and V2 is the final volume.

Plugging in the given values, we get:
4.267 M)(500.0 mL) = M2(1.85 L)
Simplifying this equation, we get:
M2 = (4.267 M)(500.0 mL) / (1.85 L)
M2 = 1.153 M
Therefore, the concentration resulting from the dilution is 1.153 M.
To calculate the concentration after dilution, you can use the dilution formula: C1V1 = C2V2, where C1 and V1 are the initial concentration and volume, and C2 and V2 are the final concentration and volume.
Given:
C1 = 4.267 M
V1 = 500.0 mL = 0.5 L (converted to liters)
V2 = 1.85 L
Now, find C2:

C2 = (C1 * V1) / V2
C2 = (4.267 M * 0.5 L) / 1.85 L
C2 ≈ 1.153 M
The concentration after dilution is approximately 1.153 M.

For more question on  dilution

https://brainly.com/question/3089319

#SPJ11

To find the concentration resulting from the dilution, we can use the equation:
M1V1 = M2V2
where M1 is the initial concentration, V1 is the initial volume, M2 is the final concentration, and V2 is the final volume.

Plugging in the given values, we get:
(4.267 M)(500.0 mL) = M2(1.85 L)
Simplifying and converting units, we get:
M2 = (4.267 M)(500.0 mL) / (1.85 L)
M2 = 1.16 M
Therefore, the concentration resulting from the dilution is 1.16 M.
To find the concentration after dilution, you can use the dilution formula:
C1V1 = C2V2
where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration, and V2 is the final volume.
Given:
C1 = 4.267 M
V1 = 500.0 mL (0.5 L)
V2 = 1.85 L
Rearrange the formula to solve for C2:
C2 = (C1V1) / V2
Now, plug in the given values:
C2 = (4.267 M * 0.5 L) / 1.85 L
C2 ≈ 1.154 M
So, the resulting concentration after dilution is approximately 1.154 M.

For more question on  dilution

https://brainly.com/question/24881505

#SPJ11

Answer:

I used Chat GPT to answer the question here is the answer

Assuming the gas behaves ideally, the answer is (C) The average kinetic energy stays the same.

According to the ideal gas law, PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the ideal gas constant, and T is temperature. If the temperature is held constant, then nR is also constant. Therefore, for a given amount of gas, if V increases, P must decrease (and vice versa) to maintain the same value of PV.

The average kinetic energy of gas molecules is proportional to temperature, so if the temperature is held constant, the average kinetic energy of the gas molecules stays the same. The changes in volume and pressure only affect the density and distribution of the gas molecules, but not their average kinetic energy.

Answer: Ba + Co(CN)₃ → Ba(CN)₂ + Co₂O₃

Explanation:

Barium reacts with cobalt (III) cyanide to produce barium cyanide and cobalt (III) oxide according to the following chemical equation:

Ba + Co(CN)₃ → Ba(CN)₂ + Co₂O₃

It is a type of displacement reaction.

To calculate the amount of aluminum produced from 9.00 tons of Al2O3, we need to use stoichiometry. First, we'll convert the mass of Al2O3 to moles, and then use the balanced chemical equation to find the moles of aluminum. Finally, we'll convert the moles of aluminum back to mass.

1. Convert mass of Al2O3 to moles:
9.00 tons = 9,000 kg
Molar mass of Al2O3 = (2 * 26.98) + (3 * 16.00) = 101.96 g/mol
9,000 kg * (1000 g/kg) = 9,000,000 g
moles of Al2O3 = 9,000,000 g / 101.96 g/mol = 88,258 moles

2. Use balanced chemical equation to find moles of aluminum:
The balanced chemical equation is:
2 Al2O3 → 4 Al + 3 O2
Using stoichiometry, we find the ratio of Al2O3 to Al is 2:4 or 1:2.
moles of Al = 88,258 moles Al2O3 * (2 moles Al / 1 mole Al2O3) = 176,516 moles

3. Convert moles of aluminum back to mass:
Molar mass of Al = 26.98 g/mol
Mass of Al = 176,516 moles * 26.98 g/mol = 4,762,984 g
Mass of Al in tons = 4,762,984 g / (1000 g/kg) / (1000 kg/ton) = 4.76 tons

So, 4.76 tons of aluminum can be produced from 9.00 tons of Al2O3.

For more questions on: aluminum

https://brainly.com/question/30369776

#SPJ11

The two true statements about a system are:

A) Systems are a group of objects analyzed as one unit.

B) Energy that moves across system boundaries is covered.

In general, a system can be defined as a group of objects or components that are connected or related to one another in some way, and that can be analyzed as a single unit. The components within a system can interact with each other, and with the environment outside of the system, in various ways. One of the key characteristics of a system is that it has a boundary or interface that separates it from the surrounding environment.

Energy, matter, or other quantities may flow across this boundary, and the interactions between the system and its environment can affect the behavior and properties of the system as a whole.

Overall, systems are a fundamental concept in many fields of science and engineering, and they can be used to model and analyze a wide range of phenomena, from physical systems like engines and circuits, to social and ecological systems like cities and ecosystems.

To learn more about Energy here

https://brainly.com/question/11399976

#SPJ1

Answer:

0.745 moles

Explanation:

We can use the ideal gas law, which relates the pressure (P), volume (V), number of moles (n), and temperature (T) of a gas:

P V = n R T

where R is the gas constant.

We can rearrange this equation to solve for n:

n = (P V) / (R T)

We can look up the value of the gas constant for units of atm L / (mol K). The value is approximately 0.08206 (atm L) / (mol K).

Substituting the given values, we get:

n = (1.71 atm) * (12.85 L) / (0.08206 (atm L) / (mol K) * (68.16 + 273.15) K)

where we have converted the temperature from Celsius to Kelvin by adding 273.15.

Evaluating this expression gives us:

n ≈ 0.745 mol

Therefore, there are approximately 0.745 moles of gas in the sample.

1.71 L of [tex]H^2[/tex] gas can be produced at STP from the given reaction.

According to the equation, 1 mole of hydrogen gas [tex]H^2[/tex]  is created for every 2 moles of sodium (Na) that react with extra water.

Using the molar mass of Na, we can get the number of moles from the given amount of sodium (3.60 g):

3.60 g Na × (1 mol Na / 22.99 g Na) = 0.157 mol Na

Since the reaction requires 2 moles of Na to produce 1 mole of [tex]H^2[/tex]  the number of moles of [tex]H^2[/tex] produced is

0.157 mol Na × (1 mol [tex]H^2[/tex] / 2 mol Na) = 0.079 mol [tex]H^2[/tex]

Now, to calculate the volume of hydrogen gas produced at STP (standard temperature and pressure), we can use the ideal gas law

PV = nRT

Where

Solving for V, we get:

V = nRT/P = (0.079 mol)(0.08206 L atm/(mol K))(273 K)/(1 atm) = 1.71 L

Therefore, 1.71 L of % [tex]H^2[/tex] gas can be produced at STP from the given reaction.

Learn  more about molar mass here : brainly.com/question/21334167

#SPJ1

The 210.00 g sample of the water with the initial temperature of the 29.0°C absorbs the 7,000.0 J of heat. The final temperature of the water is the 36.9  °C .

The mass of the water = 210 g

The initial temperature = 29.0 °C

The final temperature = ?

The heat energy = 7000 J

The specific heat capacity = 4.184 J/g  °C

The heat energy is expressed as :

Q = m c ΔT

Where,

The m is mass of water = 210 g

The c is specific heat of water = 4.184 J/g  °C

The  ΔT is change in temperature = final temperature - initial temperature

The  ΔT is change in temperature = T - 29.0 °C

7000 = 210 × 4.184 ( T - 29.0  )

7000 = 878.64 ( T - 29.0  )

( T - 29.0  ) = 7.966

T = 36.9  °C

The final temperature is 36.9  °C .

To learn more about specific heat here

https://brainly.com/question/19907993

#SPJ1

Answer:

No,a pH of 5 is slightly acidic,not neutral. A pH of 7 is considered neutral