Please PLEASE HELP ASAP
A student placed four objects on a plastic tray: a rock, an eraser, a wood block, and an ice cube. The student slowly lifts the tray and measures the height at which each object begins to slide in order to compare the friction of each object. The table above shows the results. In a separate experiment the student used the same objects and tray, but glued a piece of gritty sandpaper to the tray. What results would be expected? A) The items would slide faster at the same heights. B) The items would start to slide when the tray is not lifted as high. C) The items would not slide at all, no matter how high the tray is raised. D) The tray would need to be raised higher before the items start to slide.
Answers
Answer:
D) The tray would need to be raised higher before the items start to slide.
Explanation:
The tray would need to be raised higher due to the gritty sandpaper causing it to have more grip or fraction between the two surfaces. In the first experiment it would have a smooth surface to slide across but in the second experiment it would have a rougher surface to slide across.
Example: It would be like taking two different kinds of shoes like tennis shoes and football cleets. Then seeing which one has more traction when going up a hill.
Hope this helps!!
Related Questions
A 30 kg child went down a 10 m tall slide. Assuming no energy was lost as friction, what was the child's velocity when he reached the
bottom?
I
Answers
Which is a form of precipitation?
A. Runoff
B. Rain
C. Gas
D. Evaporation
Answers
Answer:
D. Evaporation
Explanation:
Just did it made 100%
List 4 significant problems with nuclear power plants.
Answers
Answer:
1. could result in widespread contamination of air and water.
2. creation of radioactive wastes such as uranium mill tailings, spent (used) reactor fuel, and other radioactive wastes.
3. nuclear meltdowns
4. mining lung cancer risk
Question 6.Why does a ball dropped from a certain height not bounce back 1 point
to the same height it was dropped from? *
Answers
Answer:
Because the coefficient of restitution is less than 1.
This coefficient is 1 for a perfectly elastic collision.
Some of the energy of the fall is absorbed by the ball so the ball cannot return to its original height.
Also, you have the effects of air resistance and some energy absorption of the the reflecting surface.
Find the Net Force on a truck with a mass of 1,500kg and an acceleration
of 10m/s2?
Answers
Answer:
15,000 N
Explanation:
F = ma = (1,500 kg)(10 m/s^2) = 15,000 N
The electric field at the center of a ring of charge is zero. At very large distances from the center of the ring along the ring's axis the electric field goes to zero. Find the distance from the center of the ring along the axis (perpendicular to the plane containing the ring) at which the magnitude of the electric field is a maximum. The radius of the ring is 7.55 cm and the total charge on the ring is 7.06E-6 C.
Answers
Answer:b[tex]4.29\times 10^6\ N/C[/tex]
Explanation:
Given
The radius of the ring is [tex]a=7.55\ cm[/tex]
The charge on the ring is [tex]Q=7.06\times 10^{-6}\ C[/tex]
Electric field along the axis at a distance [tex]x[/tex] is given by
[tex]E=\dfrac{kxQ}{(x^2+a^2)^{\frac{3}{2}}}[/tex]
To get the maximum value, differentiate [tex]E[/tex] w.r.t [tex]x[/tex] we get
[tex]E_{max}=\dfrac{2kQ}{3\sqrt{3}a^2}\quad [\text{at}\ x=\dfrac{a}{\sqrt{2}}]\\\\E_{max}=\dfrac{2\times 9\times 10^9\times 7.06\times 10^{-6}}{3\sqrt{3}(7.55\times 10^{-2})^2}\\\\E_{max}=\dfrac{24.456\times 10^3}{57\times 10^{-4}}=4.29\times 10^6\ N/C[/tex]
what is Ethyl butyrate used for
Answers
Answer:
Ethyl butyrate is used as an artificial flavoring resembling orange juice or pineapple in alcoholic beverages, as an ingredient of fragrance, and as a solvent and plasticizer for cellulose. It is also used in the production of polyvinyl butyral (PVB).
Explanation:
The image below represents water's... *
Answers
Answer:
it represents the physical changes.
Explanation:
I
Would a 2021 Ford Mustang GT be light weight or heavy weight?
Answers
Answer:
Heavy weight
Explanation:
It's a muscle car, its weight its 3,825 lb, and it's classified as heavy for a car.
Answer:
Heavy Weight
Explanation:
A 2021 Mutsang GT could wrigh from 3,532 to 3,868 lbs. This would be considered a Heavy meadium to Heavy muscle car.
No where close to the boat of mopar the challenger almost weighting up to 4,500lbs
Set three resistances to 2, 3, and 5 Ohms in series, and determine the current in the circuit with an ammeter. Take the snapshot of the screen showing the circuits and the reading of the ammeter. Then, replace these three resistors with just one resistance of 10 Ohm. Determine the current running in the circuit. Take a snapshot showing the circuits and the reading of the ammeter. Is the current the same as in the previous experiment with the three resistors
Answers
Answer:
the current in the circuit must be the same.
Explanation:
The equivalent resistance in a series circuit is the sum of the resistances
in this case
R_{eq} = R₁ + R₂ + R₃
we calculate
R_{eq} = 2 + 3 + 5
R_{eq} = 10 Ω
We can see that the equivalent resistance is equal to the resistance to be changed, so the current in the circuit must be the same.
The only change there may be is due to the tolerances of the resistors
What should you do after obtaining a numerical answer when solving a problem?
Answers
. A box is pushed across the floor for a distance of 5 meters with a force of 50 Newtons in 5 seconds.
a. How much work is done?
b. What is the power?
Answers
Answer:The total amount of work is
W = F × s (force x distance)
Explanation: Explanation:
W
=
50
N
×
5
m
=
250
N
m
=
250
J
Done in 5 seconds the power is
p
=
W
t
where
t
=time
p
=
250
J
5
s
=
50
J
/
s
=
50
W
The work done in pushing the box is 250J b. The power is 50W.
What is Work done?When a force is applied to a body and the body undergoes a displacement we say that work is done. So, mathematically we can write work done as product of force and displacement. Its unit is joule(J).
W = F x D
where, F = force, D = Displacement
What is power?Power is the rate of doing work . If work is done by an appliance or object in less time then we can say that it has more power .Its unit is watt(W). Power is expressed as ,
P = W / t
where, W = work done ,t = time taken
To calculate the work done we use the formula
W = F X D
Given here, F = 50N displacement =5m
So, work done = 50 x 5 = 250J
Hence the work done in pushing a box across the floor for a distance of 5 meters with a force of 50 Newtons in 5 seconds is 250J.b. The power is given by ,P = W /t here, work done W = 250Jtime taken t = 5s
So, power is P = 250/5 =50W
Hence the solution of the question is
a. The work done in pushing the box is 250J
b. The power is 50W
To know more on work and power here
https://brainly.com/question/18094932
#SPJ2
A 67.0 kg person is riding in a car moving at 19.0 m/s when the car runs into a bridge abutment. (Assume the initial velocity is in the positive direction.) (a) Calculate the average force (in N) on the person if he is stopped by a padded dashboard that compresses an average of 1.00 cm. (Indicate the direction with the sign of your answer.) N (b) Calculate the average force (in N) on the person if he is stopped by an air bag that compresses an average of 15.0 cm. (Indicate the direction with the sign of your answer.) N
Answers
Answer:
a) F = - 1.21 10⁶ N, b) F = - 8.06 10⁴ N
Explanation:
a) For this part let's use the kinematics relations
v² = v₀² - 2 a x
distance traveled to stop is x = 1.00 cm = 0.0100 cm, final speed is zero
0 = v₀² - 2 ax
a = v₀² / 2x
a = [tex]\frac{19^2 }{2 \ 0.01}[/tex]
a = 1.81 10⁴ m / s²
this acceleration is in the opposite direction to velocity
let's use Newton's second law
F = ma
F = 67.0 (-1.81 10⁴)
F = - 1.21 10⁶ N
the negative sign indicates that it is going in the opposite direction to the speed
b) in this case it is stopped by an airbag x = 15.0 cm = 0.15 m
a = v₀² / 2x
a = [tex]\frac{19^2}{2 \ 0.15}[/tex]
a = 1.203 10³ m / s²
calculate the force
F = m a
F = 67.0 (- 1.203 10³)
F = - 8.06 10⁴ N
1. An atom that loses electrons has a ________________________ charge and an atom that gains
electrons has a ___________________________ charge.
Charged atoms are called ___________________.
2. What is an insulator? Give 4 examples.
3. What is a conductor? Give an example.
4. How can we move electrons from one place to another? What actually causes the electrons to
move?
5. Static electricity is ______________________________________________________________________
_______________________________________________________________________________________
6. Explain the attraction and repulsion of charges.
7. Why does a balloon stick to the wall?
8. Why does your hair stand up when you take off your hat?
9. Why do you get a shock when you walk across a carpet?
10. When is static electricity most noticeable and why?
11. State the Principle of Conservation of Charge.
12. The invisible electric force field around charged objects depends on __________________________,
__________________________, and _____________________________.
13. What is the relationship between the charges and the field strength?
What is the relationship between the field strength and the distance between the charges?
1. What is DC?
What is AC?
2. Name 3 ways to get DC.
3. What is an electrical circuit?
4. What is voltage?
What is current?
What is resistance?
What causes heat and light in a wire?
COPY THE TABLE comparing water in a hose-DC-units
5. Which electricity do we use in our homes?
CLICK ON ALTERNATING CURRENT
1. Explain AC.
2. Who invented the light bulb?
3. Who really invented AC?
4. Who discovered the advantages of AC over DC?
5. How is AC made?
6. What is the main advantage of AC over DC?
Answers
negative charge
ions
2- insulator through which current cant flow easily (rubber wood)
3-conductor through which current can easily flow
1. You are given a bottle that contains 4.59 cm of a metallic solid. The total mass of the bottle
is 35.66 g. The empty bottle weighs 14.23 g. What is the density of the solid?
Answers
HELP PLZZZZZ
Vitiligo is an example of a condition that comes from
A. your habits
B. your predisposed genetics
C. your social network
D. your physical environment
Answers
Answer:
the answer is b vitiligo is a genetic skin condition
Which of the following statements is true about the speed at which sound waves travel?
A:Sound travels faster through air
B:Sound travels faster in a vacuum
C:Sound travels faster through water
D:Sound travels faster through a solid
Answers
Answer: sound waves travel faster in solid than water or air.
In vacuum sound waves don't travel at all
Answer:
A: Sound travels faster through air
Explanation:
The speed of sound is the distance travelled per unit of time by a sound wave as it propagates through an elastic medium. At 20 °C, the speed of sound in air is about 343 metres per second, or a kilometre in 2.9 s or a mile in 4.7 s.
12. Which of these devices uses an electromagnet? O a light bulb O an electric motor O a refrigerator magnet a compass
Answers
Answer:
the third one with the refrigerator
What will the answers for a ,b and c be
Answers
Answer:
A. 1.6 Hz
B. 1000 m/s²
C. 50000 N
Explanation:
A. Determination of the frequency.
Period (T) = 0.625 s
Frequency (f) =?
f = 1/T
f = 1/0.625
f = 1.6 Hz
B. Determination of the acceleration.
Radius (r) = 10 m
Velocity (v) = 100 m/s
Acceleration (a) =?
a = v²/r
a = 100² / 10
a = 10000 / 10
a = 1000 m/s²
C. Determination of the net force.
Mass (m) = 50 Kg
Acceleration (a) = 1000 m/s²
Net force (F) =?
F = ma
F = 50 × 1000
F = 50000 N
what is the relationship between the perimeter and the side length of anequilateral triangle ?
Answers
Answer:
The length of the equilateral triangle's side is the length of the hypotenuse of the 30-60-90. Using this ratio, we find that the length of this triangle's hypotenuse is 4. Thus the perimeter of the equilateral triangle will be 4 multiplied by 3, which is 12.
2) __________ are chemical messengers produced by the endocrine system and released into the bloodstream.
BRAINLIEST!
NO FILE HOSTING LINKS!!!
Answers
Answer:
Hormones
Explanation:
The glands that make up the endocrine system produce chemical messengers called hormones that travel through the blood to other parts of the body. Important endocrine glands include the pituitary, thyroid, parathyroid, thymus, and adrenal glands
The magnetic field due to a utility wire is 0.10 mT when you are at a distance of 10 meters from it. What current (in Amperes) flows through the wire?
Answers
Answer:
I = 5000 A
Explanation:
We will use Ampere's Law to calculate the current:
[tex]B = \frac{\mu I}{2\pi r}\\\\[/tex]
where,
B = Magnetic Field Strength = 0.1 mT = 1 x 10⁻⁴ T
μ = Permeability of Free Space = 4π x 10⁻⁷ N/A²
I = Current = ?
r = radius = 10 m
Therefore,
[tex]1\ x\ 10^{-4}\ T = \frac{(4\pi\ x\ 10^{-7}\ N/A^2)(I)}{2\pi(10\ m)}\\\\I = \frac{(1\ x\ 10^{-4}\ T)(2\pi (10\ m))}{4\pi\ x\ 10^{-7}\ N/A^2}[/tex]
I = 5000 A
A bicycle pump contains 200 cm3 of air and is connected to a bicycle tyre. The volume of the tyre is 800 cm3. The pressure of the air in the tyre (it is ‘flat’) is 1.0 atmosphere, the same as the air in the pump. (= volume1). What is the total volume of the air initially?
Answers
Answer:
The total initial volume of air in the tire is 800 cm³
Explanation:
Given;
volume of air in the bicycle pump, V₁ = 200 cm³
volume of the tire, V₂ = 800 cm³
The total initial volume of air in the tire is 800 cm³ and when the pump is pushed in, the total volume of air in the tire becomes 200 cm³. This occurs because the new air pumped into the tire through the bicycle pump compresses the air that was previously in the tire and raises the pressure of the tire that was initially flat.
From Boyle's law, a decrease in volume causes an increase in pressure.
An example of conservation of angular momentum is jumping on a Merry-Go-Round. Watch this video (it starts part way through but the only thing you miss is the people pushing the Merry-Go-Round) to see someone jumping on a Merry-Gr-Round in motion like this problem. You can model the Merry-Go-Round as a solid disk with a radius of 2.70 m and a mass of 77.0 kg. Initially the Merry-Go-Round has an angular velocity 7.40 radians / second. Then the person jumps on and change the Moment of Inertia of the system. The person lands on the outer edge of the Merry-Go-Round and has a mass of 58.0 kg. What is the final angular velocity of the system after the person jumps on
Answers
Answer:
ωf = 2.95 rad/sec
Explanation:
Assuming no external torques acting while the person jumps on, total angular momentum must be conserved.Angular momentum for a rotating rigid body can be expressed as follows:[tex]L = I * \omega (1)[/tex]
where I = moment of inertia regarding the rotating axis, and ω= angular velocity.Since total angular momentum must be conserved, this means that the following equality must be satisfied:[tex]L_{o} = L_{f} (2)[/tex]
The initial angular momentum, taking into account that the Merry-Go-Round can be modeled as solid disk, can be expressed as follows:[tex]L_{o} = I_{o} * \omega_{o} = \frac{1}{2}* M* R^{2}* \omega_{o} =\\ \frac{1}{2} * 77.0 kg* (2.70m)^{2}* 7.40 rad/sec = 2076.92 kg*m2*rad/sec (3)[/tex]
The final angular momentum, is just the product of the new moment of inertia times the final angular velocity.The new moment of inertia, is just the sum of the original moment of inertia I₀ and the moment of inertia due to the person that jumps on.Assuming that we can treat him as a point mass, his moment of inertia is just the product of his mass times to the distance to the axis of rotation (the radius of the Merry-Go-Round) squared.So, we can write the new moment of inertia If as follows:[tex]I_{f} = I_{o} +( m_{p} * R^{2}) = (\frac{1}{2} * M* R^{2}) + ( m_{p} * R^{2}) =\\ (\frac{1}{2} * 77.0 kg* (2.70m)^{2}) +( 58.0 kg * (2.70m)^{2}) = \\ 280.67 kg*m2 + 422.82 kg*m2 = \\ 703.49 kg*m2 (4)[/tex]
The final angular momentum can be written as follows:[tex]L_{f} = I_{f} * \omega_{f} (5)[/tex]
Since (3) and (5) must be equal each other, replacing If by its value from (4) in (5), we can solve for ωf, as follows:[tex]\omega_{f} = \frac{L_{o} }{I_{f}} = \frac{2076.92kg*m2*rad/sec}{703.49kg*m2} = 2.95 rad/sec (6)[/tex]
#1 - Saturn has a mass of 5.683 x 10^26 kg. One of its moons, Titan, has a
mass of 1.345x10^23 kg. The center of Saturn to the center of Titan is 1.222
x 10^6 m. What is the magnitude of the gravitational force that attracts
Saturn and Titan? Please show work and formula
Answers
Answer:
F = G M1 M2 / R^2 attractive force
F = 6.67 * 10E-11 * 5.683 * 10E26 * 1.345 * 10E23 / (1.222 * 106)^2 N
F = 6.67 * 5.683 * 1.345 / 1.493 * 10E26 N = 3.414 * 10E27 N
PLASES HELP ASAP
A baseball bat company is testing a new alloy that they claim will improve the power of its bats for very weak or low-power batters. Given the provided data of three bat compositions, swing force, and resulting ball travel distance, what conclusion can be made regarding their new alloy? A) There is no hypothesis provided. B) The hypothesis of the company is refuted. C) The hypothesis of the company is verified. D) The hypothesis was neither verified or refuted.
Answers
Answer:
B.
Explanation:
I'm not sure if it's the right answer but I think it is. I hope I helped out in some way.
PLEASE HELP ASAP
Jane told jill that the name sunflower comes from the fact that sunflowers follow the sun in the sky through out the day. jane said that sunflowers actually turn around on their stems to find the sun. to test this idea, jane and jill designed an experiment. they grew a pot of sunflowers outside in natural sunlight, one pot in the house near, but not directly in front of a window, and the final pot inside the house, away from all windows. the girls charted the direction of the sunflower heads throughout the day. all other growing conditions were the same: soil, water, pot size. the girls could not regulate the outdoor temperature, but since it was spring, the day and night temperatures were pretty close to the indoor temperature. which is an appropriate hypothesis for this experiment?
a) sunflowers will only grow in natural light.
b) sunflowers grown indoors will bend toward a source of natural light.
c) sunflower heads turn to follow the location of the sun, both indoors and out.
d) sunflowers grown away from natural light will not be as tall as sunflowers grown outdoors.
Answers
Does time stop in a black hole
Answers
Answer:
In standard GR, nothing exists at the center of a black hole. The center of a black hole is a singularity, and because GR fails at that point it is simply removed from the manifold. That means that the singularity is not part of spacetime.
To answer your question more realistically, we believe that GR is an approximate theory that fails well before you reach the center. Unfortunately, we have no good alternative theory with which to answer the question in the region where GR fails. We simply don’t have any data from that regime and it is very hard to formulate a good theory without data. So there very well could be time at the center, but we simply don’t have a good way to even guess.
Answer:
Black hole is a region of space having a gravitational field so intense that no matter or radiation can escape
Actually time can't be stop.
although black hole slower a time
Explanation:
Time never cannot be stop totally.
h. Briefly describe the process taking place in the image below and comment on the
function of the molecule at stage 1 and 3
(6)
pat
Answers
AHEMHFgjrhfrshfghesgrgregr
Question 1 of 10 Which characteristic of nuclear fission makes it hazardous?
O A. The process destroys every atomic nucleus that goes through it.
O B. The process changes existing atoms into atoms of different elements
C. The process requires very high pressures.
O D. The radioactive wastes it produces can spread to any part of the environment
Answers
Answer:
D.
The radioactive wastes it produces can spread to any part of the environment.
Explanation:
Fission is the name given to the splitting of a heavy nucleus into two medium-mass nuclei. Fission is said to be induced if it results from the absorption of a neutron to form an unstable nucleus that decays by fission. The induced fission usually produces further neutrons accompanying the fission fragments.
Answer: D. The radioactive wastes it produces can spread to any part of the environment
Explanation:
