How many liters of iodine gas will be produced from the complete decomposition of 110 l of hydrogen iodine​

The molarity of a solution is defined as the number of moles of solute dissolved in one liter of solution. To calculate the molarity of the NaOH solution, we need to divide the number of moles of NaOH by the volume of the solution in liters.

Given that 15 moles of NaOH are dissolved in 2.0 L of solution, the molarity (M) of the solution can be calculated as:

M = number of moles of solute / volume of solution in liters

M = 15 moles / 2.0 L

M = 7.5 M

Therefore, the molarity of the NaOH solution is 7.5 M.

To know more about molarity refer here

https://brainly.com/question/31545539#

#SPJ11

The elephant toothpaste reaction and the reaction of sugar and sulfuric acid are examples of exothermic reactions and chemical decomposition.

The elephant toothpaste reaction is a popular demonstration in which hydrogen peroxide is mixed with a catalyst, usually potassium iodide or yeast, to rapidly decompose the hydrogen peroxide into oxygen gas and water. This results in the rapid production of a large volume of foam, resembling toothpaste being squeezed from a tube. The reaction is exothermic, meaning it releases heat during the process, causing the foam to be warm or even hot to the touch.

On the other hand, the reaction between sugar (sucrose) and sulfuric acid is an example of a dehydration reaction, which is also exothermic. When concentrated sulfuric acid is added to sugar, it removes the water molecules (H2O) from the sugar, leaving behind a black mass of carbon. The reaction produces a significant amount of heat and steam, making it a visually impressive demonstration.

Both of these reactions showcase the power of chemical decomposition and the release of energy during exothermic reactions. The elephant toothpaste reaction emphasizes the rapid release of gas and foam, while the reaction between sugar and sulfuric acid highlights the process of dehydration and the production of heat.

These reactions provide insight into the various ways that chemical reactions can occur and the diverse range of outcomes that can result from different reactants and conditions.

To know more about  elephant toothpaste reaction refer here

brainly.com/question/27898682#

#SPJ11

The natural process being modeled here is "Chemical weathering". The correct answer is option c.

Chemical weathering is the process by which rocks and minerals are broken down through chemical reactions with water, air, and other substances.

In this case, the clay is being broken down by the water, which is dissolving some of the minerals in the clay and carrying them away. As the water evaporates, the minerals are left behind, forming small pebbles and other components.

This process may occur over a long period of time, depending on the type of clay and the amount of water present. Chemical weathering is an important part of the Earth's natural processes, as it helps to shape the landscape and produce new materials that can be used for building and other purposes.

The correct answer is option c.

To know more about Chemical weathering refer to-

https://brainly.com/question/29616084

#SPJ11

Answer:

According to the data supplied, the reaction of baking soda and vinegar is exothermic. Exothermic reactions transfer energy from the system to the environment, often in the form of heat. The beginning temperature of the vinegar was 25 degrees Celsius, and the ultimate temperature of the reaction was 19 degrees Celsius, indicating that heat was released into the environment. This is consistent with an exothermic process, in which energy is released and transmitted to the surroundings. As a result of the chemical interaction between baking soda and vinegar, carbon dioxide gas is created, and heat is emitted.

a. The equilibrium constant expression for the reaction is:

K = [I2(org)] / [I-(aq)]^2

Substituting the given values:

K = (0.00077 M) / (0.0716 M)^2

K ≈ 0.0015

b. To calculate the percent error, we need to compare the non-corrected equilibrium constant (at 307.25 K) with the corrected equilibrium constant (at 298.15 K). Using the Van 't Hoff equation, we can relate the two equilibrium constants:

ln(K2/K1) = -ΔH°/R [(1/T2) - (1/T1)]

where K1 is the equilibrium constant at temperature T1, K2 is the equilibrium constant at temperature T2, ΔH° is the standard enthalpy change for the reaction, R is the gas constant, and ln denotes the natural logarithm.

Assuming that ΔH° is approximately constant over the temperature range, we can use the experimentally determined partition coefficient at 301.56 K to estimate the enthalpy change:

ln(K2/K1) = -ΔH°/R [(1/T2) - (1/T1)]

ln(0.046/0.0015) = -ΔH°/R [(1/298.15 K) - (1/301.56 K)]

ΔH° ≈ -118 kJ/mol

Using this value of ΔH°, we can calculate the corrected equilibrium constant at 298.15 K:

ln(K2/K1) = -ΔH°/R [(1/T2) - (1/T1)]

ln(K2/0.0015) = (-118000 J/mol) / (8.314 J/mol*K) [(1/298.15 K) - (1/307.25 K)]

K2 ≈ 0.00058

The percent error is:

% Error = |(K2 - K1)/K2| x 100%

% Error = |(0.00058 - 0.0015)/0.00058| x 100%

% Error ≈ 61.5%

Therefore, using the non-corrected equilibrium constant leads to an error of approximately 61.5%.

To know more about equilibrium refer here

https://brainly.com/question/30694482#

#SPJ11

Based on the stoichiometry, sodium oxide is the limiting reactant because it produces less product compared to the calcium chloride. Therefore, 0.998 g of calcium oxide is the maximum amount of product that can be formed.

To determine the theoretically possible mass of solid product and the limiting reactant, we need to first write the balanced chemical equation for the reaction between calcium chloride and sodium oxide:

[tex]CaCl2 + Na2O → CaO + 2NaCl[/tex]

The stoichiometric ratio of calcium chloride to sodium oxide in the equation is 1:1, which means that for every 1 mole of calcium chloride that reacts, 1 mole of sodium oxide is required. We can use this ratio to calculate the moles of each reactant:

moles of [tex]CaCl2[/tex] = 1.98 g / 110.98 g/mol = 0.0178 mol

moles of [tex]Na2O[/tex] = 3.75 g / 61.98 g/mol = 0.0604 mol

According to the balanced equation, for every mole of calcium chloride that reacts, 1 mole of calcium oxide is produced. Therefore, the theoretical yield of calcium oxide can be calculated based on the moles of calcium chloride:

moles of [tex]CaO[/tex] = 0.0178 mol

mass of [tex]CaO[/tex] = moles of[tex]CaO[/tex] x molar mass of [tex]CaO[/tex]

mass of [tex]CaO[/tex] = 0.0178 mol x 56.08 g/mol

mass of [tex]CaO[/tex]= 0.998 g

Similarly, we can calculate the maximum amount of product that can be formed based on the moles of sodium oxide:

moles of [tex]NaCl[/tex]= 2 x moles of [tex]Na2O[/tex] = 0.1208 mol

mass of[tex]NaCl[/tex] = moles of [tex]NaCl[/tex] x molar mass of[tex]NaCl[/tex]

mass of [tex]NaCl[/tex]= 0.1208 mol x 58.44 g/mol

mass of [tex]NaCl[/tex] = 7.06 g

To know more about stoichiometry refer to-

https://brainly.com/question/30215297

#SPJ11

Explanation:

To calculate the heat absorbed by the iron, we can use the formula:

Q = m * c * ΔT

where Q is the heat absorbed, m is the mass of the iron, c is the specific heat of iron, and ΔT is the change in temperature.

Given:

Mass of iron (m) = 14.1 g

Specific heat of iron (c) = 0.450 J/gºC

Change in temperature (ΔT) = 32.9ºC - 20ºC = 12.9ºC

Substituting these values into the formula, we get:

Q = 14.1 g * 0.450 J/gºC * 12.9ºC

Q = 81.47 J

Therefore, the iron absorbed 81.47 J of heat.

The final temperature of an 89.6 gram sample of aluminum is calculated to be 30.6°C after 450.5 calories of heat energy is added, given that the specific heat of aluminum is 0.215 calories per gram degree Celsius and the initial temperature is 25.7°C.

To solve this problem, we can use the formula:

Q = m x c x ΔT

where Q is the amount of heat energy added, m is the mass of the sample, c is the specific heat of the material, and ΔT is the change in temperature.

We are given Q = 450.5 calories, m = 89.6 grams, c = 0.215 calories per gram degree Celsius, and the initial temperature of the sample T1 = 25.7°C.

Let's assume that the final temperature of the sample is T2. Therefore, we can write:

Q = m x c x (T2 - T1)

Solving for T2, we get:

T2 = (Q/mc) + T1

Substituting the given values, we get:

T2 = (450.5 calories)/(89.6 grams x 0.215 calories per gram degree Celsius) + 25.7°C

T2 = 30.6°C

Therefore, the final temperature of the sample is 30.6°C.

To know more about the specific heat refer here :

https://brainly.com/question/11297584#

#SPJ11  

A plant may go through a physiological response known as thermomorphogenesis in response to a heat stimulus. Option D.The plant grows tall. is correct.

This response may cause the plant to grow and develop in a variety of different ways, including enhanced stem elongation or modifications to the morphology of the leaves. As a result of enhanced stem elongation brought on by heat stress, plants can generally grow taller. This adaptation enables the plant to go away from the heat source and more easily absorb cooler air.

It is unusual for a plant to lose all of its leaves in response to a heat stimulation because this would mean a large loss of resources for the plant. Similar to how producing large fruit is not a usual reaction to heat stress, this is because the plant's energy resources might be diverted from reproduction to survival.

Heat stress may cause flowers to drop their petals, although this is not a universal reaction and would depend on the particular plant type and climatic factors.

For more such questions on Heat stress

https://brainly.com/question/10687398

Approximately 13.3 mL of 3.00 M H₂SO₄ is required to prepare 200. mL of 0.200 N H₂SO₄.

To calculate the volume of 3.00 M H₂SO₄ required to prepare 200. mL of 0.200 N H₂SO₄, we can use the formula for molarity:

Molarity (M) = moles of solute / volume of solution in liters

We can rearrange this formula to solve for volume:

Volume (in liters) = moles of solute / molarity

First, let's calculate the moles of H₂SO₄ in 200. mL of 0.200 N solution:

0.200 N = 0.200 mol/L

Moles of H₂SO₄ = 0.200 mol/L x 0.200 L = 0.0400 mol

Next, we can use this value and the concentration of the 3.00 M H₂SO₄ to calculate the volume of the concentrated acid needed:

Volume = moles of solute / molarity

Volume = 0.0400 mol / 3.00 mol/L

Volume = 0.0133 L or 13.3 mL

So, to make 200 mL of 0.200 N H₂SO₄ , roughly 13.3 mL of 3.00 M H₂SO₄  is required.

To know more about the Volume, here

https://brainly.com/question/31482457

#SPJ4

H2O, or water, is a molecular compound that is a liquid at room temperature (22 degrees Celsius). This state is primarily due to the fact that it has relatively strong intermolecular forces.

These forces are the attractive forces between the molecules of the compound, and in the case of water, these forces are called hydrogen bonds.

Hydrogen bonds are a type of dipole-dipole interaction that occurs between molecules containing a hydrogen atom bonded to a highly electronegative element, such as oxygen in water. The oxygen atom attracts the electrons in the bond, creating a partial negative charge on the oxygen and a partial positive charge on the hydrogen.

This causes an electrostatic attraction between the partially positive hydrogen atom and the partially negative oxygen atom of a neighboring water molecule.

These hydrogen bonds give water its unique properties, such as its relatively high boiling and melting points compared to other molecular compounds with similar molecular weights.

The strong intermolecular forces provided by hydrogen bonding are what make water a liquid at room temperature, as they are strong enough to hold the molecules together, but not so strong that they form a solid at this temperature.

To know more about H2O, visit:

https://brainly.com/question/13278693#

#SPJ11

Here are the molecular geometries for each molecule after drawing their Lewis structures:

1. HICl₄: The central I is surrounded by six electron pairs - four bonding pairs and two lone pairs. Therefore, its molecular geometry is octahedral.

2. CH₂Cl₂: The central atom C has 2 single bonds with 2 H atoms and 2 single bonds with 2 Cl atoms, with no lone pairs. The molecular geometry is also tetrahedral.

3. SF₂: The central atom S has 2 single bonds with 2 F atoms and 2 lone pairs. This gives the molecule a bent molecular geometry.

4. PCl₃: The central atom P has 3 single bonds with 3 Cl atoms and 1 lone pair. This results in a trigonal pyramidal molecular geometry.

To predict the molecular geometry using VSEPR theory, we need to first draw the Lewis structure for each molecule.

1. HICl₄:

The Lewis structure for HICl₄ is as follows:

H-I-Cl
  |
  Cl
  |
  Cl

According to VSEPR theory, the molecule has an octahedral shape. The central iodine atom is surrounded by six electron pairs - four bonding pairs and two lone pairs. The bonding pairs repel each other and try to move as far apart as possible, resulting in an octahedral shape.

2. CH₂Cl₂:

The Lewis structure for CH₂Cl₂ is as follows:

H- C - H
   |  
   Cl
   |  
   Cl

According to VSEPR theory, the molecule has a tetrahedral shape. The central carbon atom is surrounded by four electron pairs - two bonding pairs and two lone pairs. The bonding pairs repel each other and try to move as far apart as possible, resulting in a tetrahedral shape.

3. SF₂:

The Lewis structure for SF₂ is as follows:

F
|\
S--F
|/
F

According to VSEPR theory, the molecule has a bent shape. The central sulfur atom is surrounded by three electron pairs - two bonding pairs and one lone pair. The bonding pairs repel each other and try to move as far apart as possible, resulting in a bent shape.

4. PCl₃:

The Lewis structure for PCl₃ is as follows:

Cl
  |
Cl - P - Cl
  |

According to VSEPR theory, the molecule has a trigonal pyramidal shape. The central phosphorus atom is surrounded by four electron pairs - three bonding pairs and one lone pair. The bonding pairs repel each other and try to move as far apart as possible, resulting in a trigonal pyramidal shape.

Learn more about VSEPR theory at https://brainly.com/question/17177984

#SPJ11

When given 20.76 moles of H2 and plenty of O2, you can make 20.76 moles of H2O.

To determine how many moles of H2O can be produced from 20.76 moles of H2 and plenty of O2, we'll use the balanced chemical equation provided: 2H2 + 1O2 --> 2H2O.

Step 1: Identify the limiting reactant. In this case, we have plenty of O2, so H2 is the limiting reactant.

Step 2: Determine the mole ratio between the limiting reactant (H2) and the product (H2O). According to the balanced equation, the mole ratio is 2H2 to 2H2O, or 1:1.

Step 3: Calculate the moles of H2O produced. Since the mole ratio is 1:1, the number of moles of H2O produced will be the same as the number of moles of H2 available. Thus, you can produce 20.76 moles of H2O.

In summary, when given 20.76 moles of H2 and plenty of O2, you can make 20.76 moles of H2O.

To know more about moles, visit:

https://brainly.com/question/31597231#

#SPJ11

The molecular weight of the hydrocarbon is 165.83 g/mol and its molecular formula is[tex]C2Cl4[/tex].

Since the empirical formula of the hydrocarbon is [tex]CCl2[/tex], we can assume that it contains one carbon atom and two chlorine atoms.

Let's first calculate the molar mass of the empirical formula:

The atomic weight of carbon is 12.01 g/mol

The atomic weight of chlorine is 35.45 g/mol

The empirical formula mass is therefore 12.01 g/mol + 2(35.45 g/mol) = 83.91 g/mol

To find the molecular formula, we need to know the molecular weight of the compound. We can use the ideal gas law to calculate the number of moles of the gas:

PV = nRT

where P is the pressure in atmospheres, V is the volume in liters, n is the number of moles, R is the ideal gas constant (0.0821 L·atm/mol·K), and T is the temperature in Kelvin.

First, we need to convert the pressure from torr to atm:

785 torr = 1.036 atm

We also need to convert the temperature from Celsius to Kelvin:

150°C + 273.15 = 423.15 K

Now we can solve for the number of moles:

n = PV/RT

n = (1.036 atm)(4.93 g/L)/(0.0821 L·atm/mol·K)(423.15 K)

n = 0.208 mol

The molar mass of the compound is the mass divided by the number of moles:

mass = n × molar mass

molar mass = mass / n

molar mass = (0.208 mol) × (4.93 g/L) / (1 L/mol)

molar mass = 1.025 g/mol

Finally, we can find the molecular formula by comparing the molar mass of the empirical formula to the molar mass of the compound:

molecular weight / empirical formula weight = n

where n is an integer. We can calculate n as follows:

n = molecular weight / empirical formula weight

n = 1.025 g/mol / 83.91 g/mol

n = 0.0122

n is close to 1/2, so we can double the empirical formula to get the molecular formula:

[tex]C2Cl4[/tex]

Therefore, the molecular weight of the hydrocarbon is 165.83 g/mol (2 × 83.91 g/mol) and its molecular formula is [tex]C2Cl4[/tex].

To know more about hydrocarbon refer to-

https://brainly.com/question/31643106

#SPJ11

The Snickers bar released 1,077,280 joules of energy when burned.

To calculate the energy released by burning a Snickers bar, we can use the formula:

q = mcΔT

where q is the heat energy released, m is the mass of water, c is the specific heat of water, and ΔT is the temperature change.

We know the mass of water is 3500 g, and the temperature change is 72°C. The specific heat of water is 4.184 J/g°C.

Therefore:

q = (3500 g) x (4.184 J/g°C) x (72°C) = 1077280 J

So, the Snickers bar released 1,077,280 joules of energy when burned.

To know more about temperature change refer here:

https://brainly.com/question/20531957

#SPJ11

The most crucial step during the preparation of the Grignard reagent is ensuring that all the equipment and reactants are absolutely dry.

To ensure that the equipment and reactants are dry, the equipment must be thoroughly cleaned and dried before use, and the reactants should be purified and dried before being introduced into the reaction vessel. The solvent, typically diethyl ether, should also be dried using a drying agent such as anhydrous magnesium sulfate.

The reaction should be carried out under an inert atmosphere, such as nitrogen or argon, to prevent the formation of unwanted byproducts. By taking these precautions, the formation of the Grignard reagent can be optimized, leading to a higher yield and better quality product.

To learn more about reagent follow the link:

https://brainly.com/question/30144052

#SPJ4

The weight/volume percent concentration of the diluted solution is 15%.

The initial solution is a 30.0% (w/v) solution, which means that 30.0 grams of vitamin C is dissolved in 100 mL of the solution. Therefore, the amount of vitamin C in the initial solution is:

30.0% (w/v) = 30.0 g / 100 mL = 0.3 g/mL

The initial solution is then diluted to a final volume of 200 mL. Since the amount of vitamin C in the solution remains constant, we can use the following equation to calculate the final concentration:

CiVi = CfVf

where Ci and Vi are the initial concentration and volume, and Cf and Vf are the final concentration and volume.

We can rearrange the equation to solve for the final concentration:

Cf = (CiVi) / Vf

Substituting the values, we get:

Cf = (0.3 g/mL x 100 mL) / 200 mL

Cf = 0.15 g/mL

Finally, we can convert the concentration to weight/volume percent by multiplying by 100:

weight/volume percent = Cf x 100%

weight/volume percent = 0.15 g/mL x 100%

weight/volume percent = 15%

To know more about vitamin C refer to-

https://brainly.com/question/15080220

#SPJ11

The percent yield of CO2 in the decomposition reaction of calcium carbonate is 96.20%.

The decomposition reaction of calcium carbonate (CaCO3) is represented by the balanced equation:

CaCO3(s) --> CaO(s) + CO2(g)

To calculate the percent yield of CO2 from a 15.8-g sample of calcium carbonate that decomposed, leaving a solid mass of 9.10 g, follow these steps:

1. Determine the molar mass of CaCO3, CaO, and CO2.
- CaCO3: (40.08 + 12.01 + 3*16.00) = 100.09 g/mol
- CaO: (40.08 + 16.00) = 56.08 g/mol
- CO2: (12.01 + 2*16.00) = 44.01 g/mol

2. Calculate the theoretical amount of CO2 produced by the complete decomposition of 15.8 g of CaCO3.
- moles of CaCO3: (15.8 g) / (100.09 g/mol) = 0.158 mol
- moles of CO2 produced: 0.158 mol (1:1 ratio with CaCO3)
- mass of CO2: (0.158 mol) * (44.01 g/mol) = 6.95 g

3. Calculate the actual amount of CO2 produced based on the remaining solid mass.
- mass of CaO and unreacted CaCO3: 9.10 g
- mass of CaCO3 in the remaining solid: 15.8 g - 9.10 g = 6.70 g
- moles of CO2 actually produced: (6.70 g) / (44.01 g/mol) = 0.152 mol

4. Calculate the percent yield of CO2.
- percent yield: (actual moles of CO2 / theoretical moles of CO2) * 100
- percent yield: (0.152 mol / 0.158 mol) * 100 = 96.20%

The percent yield of CO2 in the decomposition reaction of calcium carbonate is 96.20%.

To know more about decomposition reaction, visit:

https://brainly.com/question/16987748#

#SPJ11

The gas occupies a volume of approximately 28.18 liters at a temperature of 28°C and a pressure of 1.631 atm

To determine the volume the gas occupies at a temperature of 28°C and a pressure of 1.631 atm, we will use the Ideal Gas Law, which is defined as PV = nRT. In this equation, P represents pressure, V represents volume, n represents the number of moles of the gas, R is the ideal gas constant, and T is the temperature in Kelvin.

First, we need to convert the temperature from Celsius to Kelvin: T(K) = T(°C) + 273.15. In this case, T(K) = 28 + 273.15 = 301.15 K.

Now, we can use the Ideal Gas Law to find the volume of the gas. The ideal gas constant (R) is 0.0821 L atm/mol K. Therefore, we have:

1.631 atm (V) = 3 moles (0.0821 L atm/mol K) (301.15 K)

To find the volume (V), we can rearrange the equation and isolate V:

V = (3 moles * 0.0821 L atm/mol K * 301.15 K) / 1.631 atm

V = 45.98271 L/mol / 1.631 atm

V ≈ 28.18 L

So, the gas occupies a volume of approximately 28.18 liters at a temperature of 28°C and a pressure of 1.631 atm.

To know more about temperature, visit:

https://brainly.com/question/29133754#

#SPJ11

A one molal solution is easier to prepare.

A one molal solution is easier to prepare than a one molar solution because it involves a smaller amount of solute. A one molar solution contains one mole of solute per liter of solution, while a one molal solution contains one mole of solute per kilogram of solvent. Since a kilogram of solvent is usually easier to measure than a liter of solution, it is easier to prepare a one molal solution. Additionally, the concentration of a one molal solution is dependent on the mass of solvent, which is more consistent and precise than the volume of solution.

Know more about Molal here:

https://brainly.com/question/26921570

#SPJ11

Magnesium chloride and silver nitrate react in aqueous solution when they come into contact with each other. In other words, they need to be dissolved in water for the reaction to occur. This is because both compounds are ionic and require a medium for their ions to interact and exchange. Therefore, the condition for the reaction between magnesium chloride and silver nitrate is an aqueous solution.

Magnesium chloride (MgCl₂) and silver nitrate (AgNO₃) react in an aqueous solution. The condition required for the reaction to occur is that both substances are dissolved in water. When this condition is met, a double displacement reaction takes place, leading to the formation of silver chloride (AgCl) precipitate and magnesium nitrate (Mg(NO₃)₂) in the solution. The reaction can be represented by the following balanced equation:

MgCl₂ (aq) + 2AgNO₃ (aq) → 2AgCl (s) + Mg(NO₃)₂ (aq)

1. Dissolve magnesium chloride (MgCl₂) and silver nitrate (AgNO₃) in water to create aqueous solutions.
2. Mix the two aqueous solutions together.
3. Observe the formation of silver chloride (AgCl) precipitate and magnesium nitrate (Mg(NO₃)₂) in solution as a result of the double displacement reaction.

Learn more about Magnesium chloride at https://brainly.com/question/26227142

#SPJ11

One way to reduce the volume of hydrogen gas needed to power a car for 400 km is to use a technology called on-board hydrogen storage.

This involves compressing the hydrogen gas to very high pressures, typically between 5,000 and 10,000 psi, which significantly reduces its volume.

Another method is to use liquid hydrogen storage, which involves cooling hydrogen gas to its boiling point (-423.17°F or -252.87°C) and storing it in a cryogenic tank. At this temperature, hydrogen gas is in its liquid state and takes up much less space than when it is in its gaseous state.

Both of these methods of hydrogen storage can greatly reduce the volume of hydrogen needed to power a car for 400 km, making hydrogen fuel cell cars more practical and feasible for everyday use.

To know more about hydrogen gas, refer here:

https://brainly.com/question/143551553#

#SPJ11

To predict the molecular geometry of these molecules using the VSEPR theory, we first need to draw the Lewis structure for each molecule:

1. HI

Lewis structure: H-I (single bond)

The central atom (Iodine) has 7 valence electrons, and each hydrogen atom contributes 1 valence electron. Therefore, the total valence electrons in the molecule is 9.

Steric number = number of lone pairs of electrons + number of atoms bonded to central atom = 0 + 1 = 1

Molecular geometry: linear

2. CBr4

Lewis structure:

:Br-C-Br:

: | :

:Br-C-Br:

The central atom (Carbon) has 4 valence electrons, and each Bromine atom contributes 7 valence electrons. Therefore, the total valence electrons in the molecule is 32.

Steric number = number of lone pairs of electrons + number of atoms bonded to central atom = 0 + 4 = 4

Molecular geometry: tetrahedral

3. CH2Cl2

Lewis structure:

H : Cl

| :

H-C-H

| :

Cl:

The central atom (Carbon) has 4 valence electrons, each hydrogen atom contributes 1 valence electron, and each chlorine atom contributes 7 valence electrons. Therefore, the total valence electrons in the molecule is 20.

Steric number = number of lone pairs of electrons + number of atoms bonded to central atom = 2 + 4 = 6

Molecular geometry: octahedral

However, the two lone pairs of electrons on the central atom will repel the bonded pairs more than the bonded pairs will repel each other. Therefore, the shape will be bent or V-shaped.

4. SF2

Lewis structure:

F : S : F

\ /

F

The central atom (Sulfur) has 6 valence electrons, each Fluorine atom contributes 7 valence electrons. Therefore, the total valence electrons in the molecule is 20.

Steric number = number of lone pairs of electrons + number of atoms bonded to central atom = 1 + 2 = 3

Molecular geometry: trigonal planar

However, the lone pair of electrons on the central atom will repel the bonded pairs more than the bonded pairs will repel each other. Therefore, the shape will be bent or V-shaped.

5. PCl3

Lewis structure:

Cl : P : Cl

:

Cl

The central atom (Phosphorus) has 5 valence electrons, each Chlorine atom contributes 7 valence electrons. Therefore, the total valence electrons in the molecule is 26.

Steric number = number of lone pairs of electrons + number of atoms bonded to central atom = 0 + 3 = 3

Molecular geometry: trigonal planar

To know more about VSEPR theory refer to-

https://brainly.com/question/14992767

#SPJ11

The matchup are:

Acid with the highest electrical conductivity:

Acid which could also be a base according to the Modified Arrhenius Theory:

Note:  H2O(aq) is amphoteric, meaning it can act as an acid or a base according to the Modified Arrhenius Theory. H2CO3(aq) is a polyprotic acid, meaning it can donate multiple protons in a stepwise manner. HCOOH(aq) has a very low ionization constant, meaning it ionizes at a very slow rate compared to other acids.

Read more about acids here:

https://brainly.com/question/25148363

#SPJ1

The acceleration due to gravity on the massive planet is 39.48 m/s².

The period (T) of a simple pendulum is given by:

T = 2π√(L/g),

where L is the length of the pendulum and g is the acceleration due to gravity.

In this scenario, we are given that the period of the pendulum (T) is 1 second and the length of the pendulum (L) is 1 meter.

So, substituting these values into the equation:

1 = 2π√(1/g)

Simplifying this equation :

g = (4π²) / (1²)

g = 4π² m/s²

g ≈ 39.48 m/s²

Learn more about simple pendulum at: https://brainly.com/question/31309965

#SPJ1

To calculate the specific heat capacity of cadmium, we can use the formula:

Q = mcΔT, Where Q is the heat transfer, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature. Since the heat gained by the water equals the heat lost by the cadmium, we can set up the following equation:
mc_cadmium (Tfinal - Tinitial_cadmium) = mc_water (Tfinal - Tinitial_water).

Given:
m_cadmium = 65.6 g
Tinitial_cadmium = 100.0°C
m_water = 25.0 g
Tinitial_water = 23.0°C
Tfinal = 32.7°C
c_water = 4.18 J/g°C (specific heat capacity of water)

Now we can solve for c_cadmium:

65.6 * c_cadmium * (32.7 - 100.0) = 25.0 * 4.18 * (32.7 - 23.0)

Solving for c_cadmium:

c_cadmium = (25.0 * 4.18 * (32.7 - 23.0)) / (65.6 * (32.7 - 100.0))
c_cadmium ≈ 0.227 J/g°C

So the specific heat capacity of cadmium is approximately 0.227 J/g°C.

For more questions on: heat

https://brainly.com/question/30738335

#SPJ11

By considering the solubility rules, we can determine whether a precipitate will form and its empirical formula when mixing two aqueous solutions.

The table can be completed as follows(image attached):

To determine whether a precipitate will form when solutions A and B are mixed, we need to consider the solubility rules of the compounds involved. If the product of the ions in the solution is insoluble, then a precipitate will form.

In the first case, potassium sulfide (K2S) and iron(II) sulfate (FeSO4) will react to form potassium sulfate (K2SO4) and iron(II) sulfide (FeS), which is insoluble. Thus, a precipitate will form with empirical formula FeS. In the second case, both zinc sulfate (ZnSO4) and iron(II) bromide (FeBr2) are soluble in water and will not react to form an insoluble compound. Therefore, no precipitate will form.

In the third case, barium bromide (BaBr2) and potassium acetate (KC2H3O2) will react to form barium acetate (Ba(C2H3O2)2) and potassium bromide (KBr), which is soluble. However, barium acetate is insoluble and will form a precipitate with empirical formula Ba(C2H3O2)2.

To know more about the Aqueous solutions, here

https://brainly.com/question/29987702

#SPJ4

197.4 grams of oxygen gas is consumed during the combustion of propane. Using stoichiometry, it is calculated that 88.43 grams of water vapor is produced as a result.

The balanced chemical equation for the combustion of propane is:

C₃H₈ + 5O₂ → 3CO₂ + 4H₂O

From the equation, we can see that for every mole of propane (C₃H₈) consumed, 4 moles of water (H₂O) are produced.

To solve the problem, we need to first find the number of moles of oxygen (O₂) consumed:

Moles of O₂ = Mass of O₂ / Molar mass of O₂

Molar mass of O₂ = 32 g/mol (from the periodic table)

Moles of O₂ = 197.4 g / 32 g/mol

Moles of O₂ = 6.16875 mol

Since the balanced chemical equation shows that 5 moles of O₂ are required for every mole of C₃H₈, we can find the number of moles of C₃H₈ consumed:

Moles of C₃H₈ = Moles of O₂ / 5

Moles of C₃H₈ = 6.16875 mol / 5

Moles of C₃H₈ = 1.23375 mol

Now, we can find the number of moles of H₂O produced:

Moles of H₂O = Moles of C₃H₈ x 4

Moles of H₂O = 1.23375 mol x 4

Moles of H₂O = 4.935 mol

Finally, we can find the mass of H₂O produced:

Mass of H₂O = Moles of H₂O x Molar mass of H₂O

Molar mass of H₂O = 18 g/mol (from the periodic table)

Mass of H₂O = 4.935 mol x 18 g/mol

Mass of H₂O = 88.43 g

Therefore, 88.43 grams of water vapor is produced as a result of the combustion of propane with 197.4 grams of oxygen gas.

To know more about the combustion refer here :

https://brainly.com/question/31123826#

#SPJ11

To calculate the number of moles of nitrogen required to fill the airbag, we need to use the ideal gas law.

We know the temperature of the nitrogen gas produced by the chemical reaction, which is 495°C, and we assume that it behaves like an ideal gas.

We also know the volume of the airbag, which we can use to calculate the number of moles of nitrogen using the ideal gas law equation PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is temperature.

Once we have calculated the number of moles of nitrogen required, we can move on to part C of the question, which asks us to calculate the mass of sodium azide required to produce that amount of nitrogen.

To do this, we need to refer to the balanced chemical equation given in part B and use the atomic weights from the periodic table to calculate the mass of sodium azide needed.

To know more about ideal gas law click on below link:

https://brainly.com/question/28257995#

#SPJ11

4.3 mL of 16.2 M [tex]NH3[/tex]is required to prepare 350.0 mL of 0.200 M [tex]NH3[/tex]

The molarity equation is:

Molarity (M) = moles of solute / liters of solution

We can rearrange this equation to solve for the number of moles of solute:

moles of solute = Molarity (M) x liters of solution

We can use this equation to determine the number of moles of [tex]NH3[/tex]required to prepare the 350.0 mL of 0.200 M [tex]NH3[/tex] solution:

moles of [tex]NH3[/tex] = (0.200 M) x (0.350 L) = 0.070 moles [tex]NH3[/tex]

Now, we need to determine the volume of 16.2 M [tex]NH3[/tex]required to obtain 0.070 moles of [tex]NH3[/tex]. We can use the following equation:

moles of solute = Molarity (M) x liters of solution

Rearranging the equation to solve for the volume of solution, we get:

liters of solution = moles of solute / Molarity (M)

Plugging in the values, we get:

liters of solution = 0.070 moles  / 16.2 M[tex]NH3[/tex] = 0.0043 L

Converting this to milliliters, we get:

volume of 16.2 M [tex]NH3[/tex] = 0.0043 L x 1000 mL/L = 4.3 mL

To know more about Molarity  refer to-

https://brainly.com/question/8732513

#SPJ11