How can you determine the specific heat capacity of 1. 0g of yam

The equilibrium constant, Kp, for this reaction at 581 K is 0.107.

The first step in solving this problem is to write the balanced chemical equation for the reaction and the corresponding equilibrium expression in terms of partial pressures:

[tex]COCl_2[/tex](g) ⇌ [tex]CO(g) +[/tex] [tex]Cl_2(g)[/tex]

Kp = (P_CO × P_[tex]Cl_2[/tex]) / [tex]P\ COCl_2[/tex]

Next, we can use the given equilibrium partial pressures of [tex]COCl_2[/tex] and Cl2 to find the equilibrium partial pressure of CO using the ideal gas law:

[tex]P\ {CO} = (P\ COCl_2 - P\ Cl_2) / 2[/tex]

Substituting the values given in the problem, we get:

P_CO = (0.872 atm - 0.390 atm) / 2 = 0.241 atm

Now we can plug in these values into the equilibrium expression and solve for Kp:

[tex]Kp = (0.241\ atm * 0.390\ atm) / 0.872\ atm = 0.107[/tex]

To know more about equilibrium constant, here

brainly.com/question/10038290

#SPJ1

The rate enhancement that could be accomplished by the enzyme forming one low barrier hydrogen bond with transition state at 25 °C is 10⁷.

The decrease is about 5.7 kJ/mol that is observed in the free energy of the activation of the reaction when the 10 fold increase will occurs in the rate of the reaction at 25ºC.

The hydrogen bond  free energy = 40 kJ/mol.

Now, for the hydrogen bond, the times of the  10 fold increase

= (40 kJ/mol) / (5.7 kJ/mol)

= 7 times.

Hence, the rate that show the 10 fold increase 7 times. Therefore, the enhancement in the rate will be 10⁷.

To learn more about rate here

https://brainly.com/question/31260701

#SPJ4

This question is incomplete, the complete question is :

calculate the rate enhancement that could be accomplished by an enzyme forming one low barrier hydrogen bond with transition state at 25 °C.

The substance described in the question is most likely a base or an alkali. Bases have a bitter taste, feel slippery or soapy to the touch, conduct electricity in solution, and have a pH above 7.

The slipperiness is due to the ability of bases to react with oils and fats to form soaps, which have a slippery texture.

The ability to conduct electricity is due to the presence of ions in the solution. In the case of bases, these are usually hydroxide ions (OH-) which can conduct electric current when dissolved in water.

The high pH is also characteristic of bases, as pH is a measure of the concentration of hydrogen ions (H+) in solution. In the case of bases, the concentration of OH- ions is higher than the concentration of H+ ions, leading to a pH above 7.

Examples of common bases include "sodium hydroxide (NaOH), potassium hydroxide (KOH), and calcium hydroxide (Ca(OH)2)".

to know more about alkali refer here:

https://brainly.com/question/30607576#

#SPJ11

The Bohr equation for the hydrogen atom is given by:

E = -2.18 × 10^-18 J/n^2

where E is the energy of the electron, and n is the principal quantum number.

The lowest energy level or ground state of hydrogen is when n = 1. So, we can find the energy of the lowest excited state by setting n = 2 in the Bohr equation:

E = -2.18 × 10^-18 J/2^2 = -0.54 × 10^-18 J

The energy of the lowest excited state is the difference between the energy of the ground state and the energy of the excited state. So, we can find the energy of the lowest excited state by subtracting the energy of the ground state (n=1) from the energy of the excited state (n=2):

ΔE = E₂ - E₁ = (-0.54 × 10^-18 J) - (-2.18 × 10^-18 J) = 1.64 × 10^-18 J

Therefore, the energy of the lowest excited state of hydrogen is 1.64 × 10^-18 J, which is closest to option (b) 1.66 × 10^-18 J.

To know more about  hydrogen  refer here

https://brainly.com/question/31018544#

#SPJ11

Electrons are being shared between nitrogen and hydrogen is the correct statement. Hence option D is correct.

A sort of chemical link known as a covalent bond is created when two atoms share electrons. The electrons that both atoms share are held in a stable balance by a force exerted by both atoms in a covalent link.

Although there are some exceptions, covalent bonds, which are the not as strong as the ionic bonds, are typically created between nonmetal atoms. The ionic bonds are quite stronger than they are.

New bonds for ammonia are created as a result of the reaction between two nitrogen molecules and one hydrogen molecule. Heat energy is released to the environment during this process. This reaction is exothermic as a result.

To know about atom

https://brainly.com/question/30895149

#SPJ1

The complete question is

The reaction between Hydrogen and Nitrogen is illustrated in the image. Which

statement about this reaction is correct?

N₂ + 3H₂ → 2NH₂

a) The nucleus of nitrogen is being split to be able to form bonds with hydrogen.

b) The nucleus of nitrogen is being fused with hydrogen to form a new compound.

c) Protons are being transferred between nitrogen and hydrogen.

d) Electrons are being shared between nitrogen and hydrogen.

The pH of a solution of a weak acid H₂CO₃ (carbonic acid) which is 1. 2 x 10⁻⁵ M is 5.64.

The pH of this weak acid when 1. 0 x 10⁻⁴ M NaHCO₃ is added to it is 9.53.

To find the pH of a solution of weak acid H₂CO₃ with a concentration of 1.2 x 10⁻⁵ M, we can use the equation for the acid dissociation constant (Ka) of H₂CO₃:

Ka = [H+][HCO₃⁻]/[H₂CO₃]

We know that the Ka value for H₂CO₃ is 4.3 x 10⁻⁷, and we can assume that the concentration of HCO₃⁻ is equal to the concentration of H⁺ since it is a weak acid. Therefore, we can simplify the equation to:

4.3 x 10⁻⁷ = [H⁺]² / 1.2 x 10⁻⁵

Solving for [H⁺], we get:

[H⁺] = 3.3 x 10⁻⁴ M

To find the pH, we can use the equation:

pH = -log[H⁺]

So, the pH of the solution before adding NaHCO₃ is:

pH (before) = -log(3.3 x 10⁻⁴) = 5.64

When 1.0 x 10⁻⁴ M of NaHCO₃ is added to the solution, it reacts with the H⁺ ions and forms more HCO₃⁻ ions, causing a shift in the equilibrium. The reaction is:

NaHCO₃(aq) + H⁺ → Na⁺(aq) + H₂CO₃(aq)

The addition of NaHCO₃ increases the concentration of HCO₃⁻ and decreases the concentration of H₂CO₃, which causes the equilibrium to shift to the left. This results in a decrease in [H⁺] and an increase in pH.

To find the pH after adding NaHCO₃, we need to calculate the new concentrations of H+ and HCO₃⁻ using an ICE table. Assuming that the initial concentration of H₂CO₃ does not change significantly, we can set up the table as follows:

                     H₂CO₃(aq) + H₂O(l) ⇌ H₃O⁺(aq) + HCO₃⁻(aq)
Initial:              1.2 x 10⁻⁵ M   0 M         0 M          0 M
Change:             -x                -x             +x            +x
Equilibrium:    1.2 x10⁻⁵ - x    0 - x          x              x

Since the initial concentration of H₂CO₃ is much larger than the amount of H⁺ that will be consumed by the reaction, we can assume that x is negligible compared to the initial concentration. Therefore, we can simplify the expression to:

[H⁺] ≈ x = [HCO₃⁻]

Using the equilibrium expression for the dissociation of HCO₃⁻, we can find the new [HCO₃⁻] concentration:

Ka = [H⁺][CO₃-2]/[HCO₃⁻]
4.3 x 10⁻⁷ = x2 / (1.2 x 10-5 + x)
x = 2.4 x 10⁻⁴ M

Therefore, the new [H⁺] and [HCO₃⁻] concentrations are both 2.4 x 10⁻⁴ M.

The new pH can be calculated using the same equation as before:

pH (after) = -log(2.4 x 10⁻⁴) = 9.53

So, the pH of the solution increases from 5.64 to 9.53 after adding NaHCO₃.

Learn more about weak acid at https://brainly.com/question/24018697

#SPJ11

Answer:

107g

Explanation:

First convert the number of molecules to moles using avogadro's number.

There are 6.02 x 10^23 molecules in 1 mol.

3.8 x 10^24 molecules NH3 ÷ 6.02 x 10^23 molecules / mol

= 6.31 mol NH3

Now that we have moles of NH3 we can multiply it by NH3's molecular mass.

NH3 molecular mass = Mass of N + Mass of H x 3

14.007g/mol + 1.008g/mol * 3

= 17.031 g NH3/ mol

6.31 mol NH3 * 17.031 g NH3 / mol

= 107g NH3

Christina can conclude that Substance A will float.

Part A: Substance A will float.

Part B: To determine which substance will float, we need to compare their densities with the density of water. Density is defined as mass per unit volume. We can calculate the density of each substance by dividing its mass by its volume:

Density of Substance A = 4 g / 6 mL = 0.67 g/mL
Density of Substance B = 8 g / 6 mL = 1.33 g/mL
Density of Substance C = 10 g / 6 mL = 1.67 g/mL

The density of water is approximately 1 g/mL. A substance will float if its density is less than the density of water. In this case, Substance A has the lowest density (0.67 g/mL), which is less than the density of water, so it will float. Substance B and Substance C have densities greater than the density of water, so they will sink. Therefore, Christina can conclude that Substance A will float.

To know more about density of water:

https://brainly.com/question/31237897

#SPJ11

Strontium nitrate is most likely the unknown solution based on the fact that it produces a white precipitate when combined with potassium carbonate but not when combined with potassium sulphate.

A "chemical reaction occurring in an aqueous solution when two ionic bonds combine, yielding the creation of an insoluble salt" is what is meant by the term "precipitation reaction." Precipitates are the insoluble salts created during precipitation reactions.

Antibodies and antigens interact to cause precipitation reactions. They are founded on the idea that two soluble reactants can combine to create one precipitate, which is an insoluble product. Lattice formation is necessary for these processes.

To know more about solution visit:-

https://brainly.com/question/30665317

#SPJ1

The solubility of Ag and PO, in water at 25 °C is 4.3 x10-5 M. The Ksp for Ag3PO is 2.1 x 10-12. Thus, option A) is correct.

Solubility refers to the maximum amount of a substance that can dissolve in a given solvent at a certain temperature and pressure. In this case, Ag3PO4 has a solubility of 4.3 x 10-5 M in water at 25°C. The Ksp (solubility product constant) for Ag3PO4 can be calculated using the following equation:

Ag3PO4(s) ⇌ 3Ag+(aq) + PO43-(aq)

Ksp = [Ag+]3 [PO43-]

To calculate Ksp, we need to determine the concentration of Ag+ and PO43- ions in solution. Since Ag3PO4 dissociates into three Ag+ ions and one PO43- ion, the concentration of Ag+ ions will be three times the solubility of Ag3PO4:

[Ag+] = 3(4.3 x 10-5 M) = 1.29 x 10-4 M

The concentration of PO43- ions will be equal to the solubility of Ag3PO4:

[PO43-] = 4.3 x 10-5 M

Now, we can plug these concentrations into the Ksp equation:

Ksp = (1.29 x 10-4)3 (4.3 x 10-5) = 2.1 x 10-12

Therefore, the answer is A) 2.1 x 10-12.

To know more about solubility, visit:

https://brainly.com/question/28170449#

#SPJ11

The final pressure of the gas when the volume changes from 720 mL to 820 mL is approximately 1.22 atm.


To solve this problem, we can use Boyle's Law, which states that the product of the initial pressure and volume (P1V1) is equal to the product of the final pressure and volume (P2V2) for a gas at a constant temperature:

P1V1 = P2V2

Given the initial pressure (P1) is 1.4 atm and the initial volume (V1) is 720 mL, we need to find the final pressure (P2) when the volume (V2) changes to 820 mL. Rearrange the formula to solve for P2:

P2 = P1V1 / V2

Substitute the given values:

P2 = (1.4 atm × 720 mL) / 820 mL
P2 ≈ 1.22 atm

Therefore, the final pressure of the gas is approximately 1.22 atm.

To know more about Boyle's Law click on below link:

https://brainly.com/question/1437490#

#SPJ11

Answer:

Ksp = [tex]3.2*10^{-5}[/tex]

Explanation:

If 0.020 M of Ca(OH)2 dissociates, then we can follow the Ksp formula.

Ksp = [tex][A]^{a} [B]^{b}[/tex]     Eq.1

[tex]Ca(OH)2 -- > Ca^{2+} (aq) + 2 OH^{-} (aq)[/tex]      Eq.2

[tex]0.02M Ca(OH)2 -- > 0.02 M Ca^{2+} + 2*0.02 M OH^{-}[/tex]

Here, Ca is our A and since it has a coefficient of 1, a = 1

OH is our B. The concentration is doubled because there are 2 moles of OH per mole of Ca(OH)2. Due to this it also has a coefficient of two (Eq.2), making b = 2.

Ksp = [tex][0.02][0.02*2]^{2}[/tex]

Ksp = 0.000032

Ksp = [tex]3.2*10^{-5}[/tex]

Energy sources have different advantages and disadvantages such as their impact on the natural environment, their high costs, their maintenance and their renewability.

There are many sources of energy available to power our daily lives. Here are four of the most commonly used sources, along with their advantages and disadvantages:

Fossil fuels have been the primary source of energy for centuries. They are reliable and provide a large amount of energy for a relatively low cost. However, the process of extracting, transporting and burning these fuels has serious environmental consequences. They are finite resources, and the increasing demand for them is leading to resource depletion, price volatility, and geopolitical conflicts.

Nuclear energy is a reliable, low-carbon source of energy that can generate large amounts of electricity. It does not produce greenhouse gases or other air pollutants, which makes it an attractive alternative to fossil fuels. However, nuclear accidents can have devastating environmental and human impacts. The radioactive waste produced by nuclear power plants also poses a significant challenge to disposal and storage.

Solar energy is a clean, renewable source of energy that is increasingly popular. It does not produce any emissions or pollution, and the costs of installation have decreased significantly in recent years. However, solar power generation is limited by weather conditions and geographic location. It also requires a significant initial investment and a large amount of space.

Wind energy is another clean, renewable source of energy that is growing in popularity. It is also relatively inexpensive and can generate a significant amount of electricity. However, like solar power, wind power generation is dependent on weather conditions and geographic location. Wind turbines can also be noisy and can impact wildlife and their habitats.

In conclusion, all sources of energy have advantages and disadvantages. Fossil fuels have been the primary source of energy for many years, but their environmental impact is becoming increasingly clear. Nuclear energy is a low-carbon source of energy, but poses significant risks. Solar and wind energy are both clean and renewable, but have limitations in terms of weather and geographic location. To achieve a sustainable energy future, we need to continue developing and implementing a mix of renewable and non-renewable energy sources while minimizing their negative impacts on the environment and society.

Learn more about sources of energy in: https://brainly.com/question/29763772

#SPJ1

A greater speed of particles in a container will lead to an increase in temperature, pressure, potential phase changes, and possibly container expansion if the container is not rigid.

If there is a greater speed of particles in a container, the following changes will occur:

1. Increase in temperature: Faster-moving particles will have greater kinetic energy, which will result in an increase in the temperature of the system.

2. Increase in pressure: As the particles move faster, they will collide more frequently with the walls of the container, exerting a greater force. This leads to an increase in pressure.

3. Potential phase change: If the increase in temperature is significant enough, a phase change may occur, such as a solid melting into a liquid or a liquid evaporating into a gas.

4. Expansion of the container (if not rigid): If the container is not rigid, the increased pressure may cause it to expand or deform.

To summarize, a greater speed of particles in a container will lead to an increase in temperature, pressure, potential phase changes, and possibly container expansion if the container is not rigid.

To know more about speed of particles refer here: https://brainly.com/question/31184765#

#SPJ11

The statement that "all strong acids and bases appear equally strong in H₂O" is not entirely accurate. However, it is true that in water, the strongest acid possible is H₃O⁺ (hydronium ion), while the strongest base possible is OH⁻ (hydroxide ion).

In both cases, the equilibrium favors the dissociation products, meaning that the acids and bases fully ionize in water. Water also exerts an effect on any strong acid or base, as it can stabilize the charged ions produced by dissociation. Overall, the strength of an acid or base in water is determined by its dissociation constant (Ka for acids and Kb for bases). Stronger acids and bases have higher dissociation constants, meaning that they will ionize more readily and appear more "strong" in water.

To know more about strong acids and bases :

https://brainly.com/question/13263329

#SPJ11

Benign and malignant are terms used to describe different types of tumors.

A benign tumor is a mass of cells that grows slowly and does not invade nearby tissue or spread to other parts of the body. It is typically encapsulated, meaning it is surrounded by a membrane that separates it from surrounding tissues.

While it is still considered abnormal, it is usually not life-threatening and can often be removed with surgery. Benign tumors do not metastasize or spread to other parts of the body.

On the other hand, a malignant tumor is cancerous and has the ability to spread to other parts of the body through the bloodstream or lymphatic system. Malignant tumors grow rapidly and invade nearby tissue, which can cause damage to organs and structures in the body.

These tumors can also interfere with the normal functioning of organs, leading to serious health problems. Malignant tumors are usually treated with a combination of surgery, radiation, and chemotherapy.

To know more about tumors refer to-

https://brainly.com/question/14143650

#SPJ11

The freezing point of 4.09 kg of water with 186.4 g of Ca[tex]Br_2[/tex] is -0.4244 °C.

To calculate the freezing point of the water with the given amount of Ca[tex]Br_2[/tex], we need to use the formula for freezing point depression:

ΔTf = Kf × molality

where ΔTf is the change in freezing point, Kf is the freezing point depression constant, and molality is the concentration of solute particles in the solution.

First, we need to calculate the molality of the solution:

m = moles of solute / mass of solvent (in kg)

We know the mass of water is 4.09 kg, and the molar mass of Ca[tex]Br_2[/tex] is 199.89 g/mol. Therefore, the number of moles of CaBr2 is:

n = 186.4 g / 199.89 g/mol = 0.932 mol

The mass of water is 4.09 kg = 4090 g, so the molality of the solution is:

m = 0.932 mol / 4.09 kg = 0.2279 mol/kg

Now we can use the freezing point depression constant for water to calculate the change in freezing point:

ΔTf = 1.86 °C/m × 0.2279 mol/kg = 0.4244 °C

The freezing point of pure water is 0 °C, so the freezing point of the solution is:

Freezing point = 0 °C - 0.4244 °C = -0.4244 °C

Therefore, the freezing point of 4.09 kg of water with 186.4 g of CaBr2 is -0.4244 °C.

To know more about freezing point calculation:

https://brainly.com/question/31432159

#SPJ11

A filter funnel is used in laboratory experiments to separate a solid from a liquid mixture.

The funnel is designed with a conical shape and a narrow stem that fits into a filter paper, allowing the liquid to pass through while retaining the solid on top of the filter paper.

When using a filter funnel, it is important to wet the filter paper with the solvent before adding the mixture to prevent the filter paper from tearing or disintegrating.

The mixture is then poured into the funnel, and the liquid is allowed to filter through the paper into a receiving flask or beaker.

The filter funnel can be used for various applications, such as separating precipitates from a solution, isolating a solid product from a reaction mixture, or purifying a liquid by removing impurities.

The type of filter paper used will depend on the size of the particles being filtered and the solvent used.

It is important to handle the filter funnel with care to avoid spillage or breakage and to dispose of the solid waste properly after filtering.

to know more about filter funnel refer here:

https://brainly.com/question/9857749#

#SPJ11

Answer:

separate cabbage from liquid

Explanation:

You will use a filter funnel in this experiment to

✔ separate cabbage from liquid

There are 1.18x10²³ grams of nitrogen in 5.6x10²³ liters of nitrous oxide at STP.

To solve this problem, we need to use the ideal gas law equation:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. At STP (standard temperature and pressure), P = 1 atm and T = 273.15 K.

We can rearrange the equation to solve for n:

n = PV/RT

We can then convert the number of moles to grams using the molar mass of nitrogen (N₂), which is 28.02 g/mol.

n(N₂) = n(N₂O) x 2 moles of N per mole of N₂O

n(N₂) = (PV/RT) x 2

n(N₂) = (1 atm x 5.6x10²³ L) / (0.08206 L·atm/mol·K x 273.15 K) x 2

n(N₂) = 4.22x10²¹ mol

mass(N) = n(N₂) x MM(N₂)

mass(N) = 4.22x10²¹ mol x 28.02 g/mol

mass(N) = 1.18x10²³ g

As a result,  1.18x10²³ grammes of nitrogen are present in 5.6x10²³ liters of nitrous oxide at STP.

To know more about the Nitrogen, here

https://brainly.com/question/9030814

#SPJ4

The range of dilution factors that are needed to set up a successful BOD5 test for this wastewater sample is between 18 and 20.

What is Dilution?

Dilution is the process of adding solvent to a solution to decrease the concentration of solutes within the solution. In this process, the volume of the solution increases while the total amount of solute remains constant.

BOD5 = (Initial DO - Final DO) x Dilution Factor

180 mg/L = (Initial DO - 2 mg/L) x Dilution Factor

Initial DO = 180 mg/L / Dilution Factor + 2 mg/L

We want the initial DO to be between 6 and 8 mg/L, so:

6 mg/L ≤ 180 mg/L / Dilution Factor + 2 mg/L ≤ 8 mg/L

Subtracting 2 mg/L from all parts of the inequality, we get:

4 mg/L ≤ 180 mg/L / Dilution Factor ≤ 6 mg/L

Multiplying all parts by Dilution Factor, we get:

720 mg/L ≤ 180 / Dilution Factor x Dilution Factor ≤ 1080 mg/L

Simplifying, we get:

720 mg/L ≤ 180 x 5 / BOD5 ≤ 1080 mg/L

Dividing by 180 and multiplying by 5, we get:

20 ≤ 5 / BOD5 ≤ 30

Inverting the inequality, we get:

1/30 ≤ BOD5/5 ≤ 1/20

Simplifying, we get:

0.0333 ≤ BOD5/5 ≤ 0.05

Therefore, the range of dilution factors needed to set up a successful BOD5 test for this sample is between 20 and 30.

To know more about Dilution, visit;

https://brainly.com/question/27097060

#SPJ4

There are 0.0025 moles of hydrogen ions present in the flask and the expression that shows how to find it is : moles H+ = Molarity × Volume in liters

The expression to find the moles of hydrogen ions present in the flask is:

moles H+ = Molarity × Volume in liters

First, we need to convert the volume of the solution from milliliters to liters:

Volume = 25.00 mL = 25.00 ÷ 1000 L = 0.02500 L

Substituting the given values into the expression, we get:

moles H+ = 0.10 M × 0.02500 L = 0.002500 mol

Therefore, there are 0.0025 moles of hydrogen ions present in the flask.

To know more about hydrogen ions, here

brainly.com/question/14736709

#SPJ4

The expected effects on the people if the alpine and the tidewater glaciers melted is the melting the glaciers add to the rising sea levels.

The melting glaciers add to the rising sea levels, which in the turn will increases the coastal erosion and the elevates storm to surge the warming air and the ocean temperatures that will create the more frequent and the intense coastal storms such as the hurricanes and the typhoons.

The glaciers has been the melting for the decades because of the climate warming and therefore the monitoring of it is very important. The melting of the alpine and the tidewater glacier rises the sea level.

To learn more about glacier here

https://brainly.com/question/20858515

#SPJ1

75.83 grams of KNO3 are required to prepare a 0.50 M solution in 1.50 L of water.

To prepare a 0.50 M solution of KNO3 in 1.50 L of water, we can determine the amount of KNO3 required by using the formula:

Molarity (M) = moles of solute / liters of solution

Rearranging the formula, we can calculate the number of moles of KNO3:

moles of KNO3 = Molarity x liters of solution

Given the values, we find:

moles of KNO3 = 0.50 M x 1.50 L = 0.75 moles

To find the mass of KNO3 needed, we need to use its molar mass:

molar mass of KNO3 = 101.10 g/mol

Therefore, the mass of KNO3 required is:

mass of KNO3 = moles of KNO3 x molar mass of KNO3

Substituting the values, we obtain:

mass of KNO3 = 0.75 moles x 101.10 g/mol = 75.83 g

Hence, to prepare a 0.50 M solution in 1.50 L of water, you would need 75.83 grams of KNO3.

Know more about Molarity here:

https://brainly.com/question/22997914

#SPJ11

He can do this either by changing the temperature to 150 kelvins or by changing the pressure to 200 kilopascals.

The ideal gas law is a fundamental principle in thermodynamics and describes the behavior of ideal gases under various conditions. It is mathematically represented by the equation:

PV = nRT

where:

P is the pressure of the gas,

V is the volume of the gas,

n is the number of moles of the gas,

R is the ideal gas constant, and

T is the absolute temperature of the gas.

The ideal gas law relates the pressure, volume, temperature, and amount of gas (number of moles) in a system. It assumes that the gas molecules do not interact with each other and occupy negligible volume compared to the total volume of the container. The ideal gas law allows for the calculation of any one of the variables (pressure, volume, temperature, or number of moles) if the other three are known.

Based on the Ideal Gas Equation,

V ∝ T

V ∝ 1/P

Using T :

V₁/T₁ = V₂/T₂

200/300 = 100/T₂

T₂ = 100/200 x 300

T₂ = 0.5 x 300

T₂ = 150 K

Using P :

P₁V₁ = P₂V₂

100 x 200 = P₂ x 100

P₂ = 200 kPa

Learn more about Ideal gas Equation, here:

https://brainly.com/question/30935329

#SPJ12

The substance ammonia (NH3) is classified as an Arrhenius base, option A is correct.

Arrhenius defined a base as a substance that produces hydroxide ions (OH⁻) in water. When ammonia dissolves in water, it reacts with water molecules to form ammonium ions (NH₄⁺) and hydroxide ions (OH⁻), as shown in the equation

NH‌₃ ‌+‌ ‌H‌₂O →‌ ‌NH‌₄ ‌‌+ ‌OH‌⁻

This reaction is characteristic of Arrhenius bases, which are substances that increase the concentration of hydroxide ions in solution. When ammonia dissolves in water, it yields hydroxide ions (OH-) which are responsible for increasing the pH of the solution, making it basic, option A is correct.

To learn more about Arrhenius follow the link:

brainly.com/question/9936252

#SPJ4

The complete question is:

Use the information to answer the following question.

Ammonia‌ ‌(NH‌₃)‌ ‌readily‌ ‌dissolves‌ ‌in‌ ‌water‌ ‌to‌ ‌yield‌ ‌a‌ ‌basic‌ ‌solution.

‌NH‌₃ ‌+‌ ‌H‌₂O →‌ ‌NH‌₄ ‌‌+ ‌OH‌⁻

How is this substance classified?

A. Arrhenius‌ ‌Base‌

B. Arrhenius‌ ‌Acid

C. Bronsted-Lowry‌ ‌Base‌

D. Bronsted-Lowry‌ ‌Acid‌

The dilution formula is a mathematical expression used to calculate the final concentration of a solution after it has been diluted.

The formula is:

C1V1 = C2V2

where:

C1 = the initial concentration of the solution

V1 = the initial volume of the solution

C2 = the final concentration of the solution

V2 = the final volume of the solution

1) 250 * 10 = 0.5 * v2

v2 = 5000 mL

2) 400 * 15 = 2000 *c2

c2 = 3M

3) 50 * 20 = 1000 * c2

c2 = 1 M as shown

Learn more about dilution formula:https://brainly.com/question/3078179

#SPJ1

Answer:

320.3 grams of SO2 can be produced

Explanation:

In order to calculate the amount of SO2 produced, we first need to write a balanced chemical equation for the reaction between O2 and sulfur:

2 SO2 + O2 -> 2 SO3

From the equation, we can see that 1 molecule of O2 reacts with 2 molecules of SO2 to produce 2 molecules of SO3.

Therefore, we need to convert the number of O2 molecules to the number of SO2 molecules in order to calculate the amount of SO2 produced.

1 molecule of O2 reacts with 2 molecules of SO2, so:

2.5 molecules of O2 * (2 molecules of SO2 / 1 molecule of O2) = 5 molecules of SO2

Now that we have the number of SO2 molecules produced, we can calculate the mass of SO2 using its molar mass. The molar mass of SO2 is approximately 64.06 g/mol.

5 molecules of SO2 * (64.06 g/mol) = 320.3 grams of SO2

Therefore, if 2.5 molecules of O2 react with sulfur to form SO2, then 320.3 grams of SO2 can be produced.

To make a 750 M solution with a volume of 855 ml, we need 56.79 grams of CaCl₂. The calculation involves using the formula mass = Molarity x Volume x Molar mass.

To calculate the mass of CaCl₂ required to make a 750 M solution with a volume of 855 ml, we can use the following formula:

mass = Molarity x Volume x Molar mass

where:

Molarity is the concentration of the solution in moles per liter (M)

Volume is the volume of the solution in liters (L)

Molar mass is the mass of one mole of the solute in grams (g/mol)

The molar mass of CaCl₂ is:

Ca = 40.08 g/mol

Cl₂ = 2 x 35.45 g/mol = 70.90 g/mol

Molar mass of CaCl₂ = 40.08 + 70.90 = 110.98 g/mol

Substituting the given values into the formula, we get:

mass = 750 mol/L x 855 mL x (1 L / 1000 mL) x 110.98 g/mol

Note that we need to convert the volume from milliliters to liters by dividing by 1000.

mass = 56.79 g

Therefore, we need 56.79 grams of CaCl₂ to make a 750 M solution with a volume of 855 ml.

To know more about the Molar mass refer here :

https://brainly.com/question/22997914#

#SPJ11

The mass of iron (III) oxide produced when 3.88 x 10²⁵ molecules of oxygen react with excess iron is 685.58 grams.

Determine the moles of oxygen molecules:
Number of moles = Number of molecules / Avogadro's number
Number of moles = 3.88 x 10²⁵ molecules / 6.022 x 10²³ molecules/mol
Number of moles = 6.44 moles of O₂

Use the balanced chemical equation to find the moles of Fe₂O₃ produced:
4Fe + 3O₂ → 2Fe₂O₃
Since 3 moles of O₂ react to produce 2 moles of Fe₂O₃
=(6.44 moles O₂) x (2 moles Fe₂O₃ / 3 moles O₂)

= 4.29 moles Fe₂O₃

Molar mass of Fe₂O₃ =

2(55.85) + 3(16.00) = 159.70 g/mol

Calculate the mass of Fe₂O₃ produced:
mass = moles x molar mass
mass = 4.29 moles x 159.70 g/mol
mass = 685.58 g

Therefore, when 3.88 x 1025 molecules of oxygen react with excess iron, 685.58 grams of iron (III) oxide are produced.

To learn more about molar mass visit:

https://brainly.com/question/837939

#SPJ11

Answer:

[tex]H _{2} SO _{4}+NaOH→NaSO _{4} +H _{2} O[/tex]

hope it helps:)