7. La constante de equilibrio Kc, se halla :
a) haciendo una simple división de las concentraciones Molares
b) con el cociente de la velocidad de los productos sobre los reactivos c) dividiendo las velocidades de las ecuaciones que forman la reacción química
d) con el cociente de las concentraciones de las sustancias presentes en la ecuación​

Metamorphic rock that breaks into sheets when broken is called "foliated metamorphic rock." Foliated metamorphic rocks are characterized by their layering or alignment of minerals, which occurs during the metamorphic process. This distinct feature makes it possible for the rocks to break along these layers, forming sheets when fractured.

The process of metamorphism, which involves the transformation of pre-existing rocks due to changes in temperature, pressure, or mineral composition, causes the minerals within the rock to reorient themselves. This reorientation leads to the alignment of minerals, creating a parallel orientation of platy or elongated minerals within the rock.

Examples of foliated metamorphic rocks include slate, phyllite, schist, and gneiss. Slate, for instance, is derived from shale and is characterized by its fine-grained texture and well-defined cleavage, allowing it to break easily into thin sheets.

Phyllite, formed from slate, exhibits a slightly coarser texture and a glossy sheen due to the re-crystallization of its constituent minerals. Schist, a medium to coarse-grained rock, is characterized by its platy minerals like micas, which also contribute to its sheet-like breaking pattern. Lastly, gneiss, formed at even higher metamorphic grades, displays distinct banding due to the segregation of its minerals but may also break into sheets depending on the mineral alignment.

In summary, a metamorphic rock that breaks into sheets when broken is known as a foliated metamorphic rock. This unique property is a result of the alignment of minerals during the metamorphic process, creating distinct layers that allow the rock to fracture along these planes. Examples of foliated metamorphic rocks include slate, phyllite, schist, and gneiss, each exhibiting varying degrees of foliation and textural features due to different metamorphic conditions.

To know more about Metamorphic rock refer here

brainly.com/question/19930528#

#SPJ11

The reaction that takes place when 2 teaspoons of supernatant liquid is added to the purple camote peel extract soaked with rubbing alcohol overnight is the formation of a purple pigment.

The purple pigment is created when the alcohol and steel wool vinegar react with the camote peel extract to break down the cell walls and release the pigment. This reaction is further enhanced by the addition of the supernatant liquid, which helps to dissolve the pigment and make it more easily visible.

The reaction that takes place when 2 teaspoons of supernatant liquid is added to the flower alcoholic extract of bougainvillea petal soaked with rubbing alcohol overnight is the formation of a pinkish-red pigment.

The pinkish-red pigment is created when the alcohol and steel wool vinegar react with the petal extract to break down the cell walls and release the pigment. This reaction is further enhanced by the addition of the supernatant liquid, which helps to dissolve the pigment and make it more easily visible.

Know more about Supernatant liquid  here

https://brainly.com/question/31171418#

#SPJ11

D. Al of the following is a reactant in the chemical equation

In a chemical equation, the substance or substances to the left of the arrow are referred to as reactants. A material that is present when a chemical reaction first begins is known as a reactant. Products refer to the material or substances to the right of the arrow. A material that is present following a chemical reaction is known as a product.

Methane (CH4) and oxygen (O2) are the reactants and carbon dioxide (CO2) and water are the products in this chemical process. (H2O). This illustration demonstrates that chemical bonds may form and break during a chemical process. The forces that keep the atoms of a molecule together are known as chemical bonds.

learn more about chemical  equation

https://brainly.com/question/23877810

#SPJ1

In constructive interference, the waves add together.

Interference is the phenomenon where two or more waves interfere with each other to form a resultant wave of greater, lower or same amplitude.

In constructive interference, the waves combine in such a way that their amplitudes are reinforced, resulting in a wave with a larger amplitude than the individual waves.

So, the correct answer is: a. they add

To know more about interference visit:

https://brainly.com/question/16098226

#SPJ11

Starting with 8.00 g of Phosphorus-32 (32P) with a half-life of 14.0 days, after 98.0 days, 0.125 g of  32P will remain.

The half-life of a radioactive isotope is the time required for half of the original sample to decay. In this case, the half-life of 32P is 14.0 days, which means that after 14.0 days, half of the 32P will decay, leaving 4.00 g.

To find out how much 32P remains after 98.0 days, we need to determine the number of half-lives that have passed. Dividing 98.0 days by 14.0 days gives us 7.

Therefore, after 7 half-lives, the amount of 32P that remains can be calculated as:

Amount remaining = (1/2)⁷ x 8.00 g = 0.125 g

Therefore, after 98.0 days, 0.125 g of 32P will remain.

To know more about half-life, refer here:

https://brainly.com/question/24710827#

#SPJ11

Answer:

please provide more información or a photo

Explanation:

Of you want me to hwlp you please have more infor like a picture

The answer is (d) cannot solve using 5% approximation rule.

The balanced equation for the reaction is:

C(g) + e(g) ⇌ 2W(g)

The equilibrium constant expression is given by:

Kc = [W]^2 / [C][e]

At equilibrium, let's assume that x moles of C react with x moles of e to produce 2x moles of W. Therefore, the equilibrium concentrations are:

[C] = (3.5 - x) mol/L

[e] = (x) mol/L

[W] = (2x) mol/L

Substituting these values :

Kc = [(2x)^2] / [(3.5 - x)(x)]

Simplifying this expression:

4x^2 + 2.34x - 8.19 = 0

Solving this quadratic equation :

x = (-2.34 ± sqrt(2.34^2 - 4(4)(-8.19))) / (2(4))

x = (-2.34 ± 3.64) / 8

We can ignore the negative root as it does not make physical sense. Therefore:

x = 0.4575 mol/L

Thus, the concentration of e at equilibrium is:

[e] = 0.4575 mol/L

Therefore, the answer is (d) cannot solve using 5% approximation rule.

To know more about equilibrium concentrations refer here:

https://brainly.com/question/13043707

#SPJ11

The mass of 6.9 moles of nitrous acid (HNO₂) is 324.3 grams.

To calculate the mass of 6.9 moles of nitrous acid (HNO₂), follow these steps:

1. Determine the molar mass of HNO₂.
2. Multiply the molar mass by the given moles (6.9 moles) to find the mass.

Step 1: Determine the molar mass of HNO₂.
HNO₂ consists of 1 hydrogen atom, 1 nitrogen atom, and 2 oxygen atoms.
- The atomic mass of hydrogen (H) is 1 g/mol.
- The atomic mass of nitrogen (N) is 14 g/mol.
- The atomic mass of oxygen (O) is 16 g/mol.

Molar mass of HNO₂ = (1 x 1) + (1 x 14) + (2 x 16) = 1 + 14 + 32 = 47 g/mol.

Step 2: Multiply the molar mass by the given moles (6.9 moles).
Mass of HNO₂ = 6.9 moles × 47 g/mol = 324.3 g.

So, the mass of 6.9 moles of nitrous acid (HNO₂) is 324.3 grams.

Learn more about nitrous acid (HNO₂) at https://brainly.com/question/1576794

#SPJ11

To cause the electrolysis of CaCl2, a minimum voltage of 4.23 volts is needed.

This voltage is required to overcome the energy barrier of the chemical reaction and initiate the dissociation of the CaCl2 compound into its constituent elements, calcium and chlorine ions.

Electrolysis is the process of using an electric current to drive a chemical reaction. In the case of CaCl2, the electrolysis will involve the decomposition of the CaCl2 into its component ions, calcium (Ca2+) and chloride (Cl-) ions. This process requires energy, which can be supplied by an external electric current.

The minimum voltage needed to cause electrolysis can be estimated using the standard reduction potential (E0) of the reaction. For the reduction of Ca2+ to calcium metal, the standard reduction potential is -2.87 volts, and for the oxidation of Cl- to chlorine gas, the standard reduction potential is -1.36 volts.

The overall reaction for the electrolysis of CaCl2 is:

CaCl2 → Ca + Cl2

The standard reduction potential for this reaction can be calculated by adding the standard reduction potential for the reduction of Ca2+ to calcium metal and the standard reduction potential for the oxidation of Cl- to chlorine gas:

E0 = -2.87 V + (-1.36 V) = -4.23 V

This means that a minimum voltage of 4.23 volts would be needed to drive the electrolysis of CaCl2. However, this is only an estimate, and the actual voltage required may be higher due to factors such as the resistance of the electrolyte solution, the efficiency of the electrodes, and other experimental conditions.

To know more about electrochemical cell:

https://brainly.com/question/31435269

#SPJ11

The chemical equation for KOH dissociating in water to form ions is:

[tex]\rm KOH (aq) \rightarrow K^+(aq) + OH^-(aq)[/tex], which shows that KOH is a base.

A chemical equation is an illustration of a chemical reaction's reactants and products.

Equation for the dissociation of KOH:

[tex]\rm KOH (aq) \rightarrow K^+(aq) + OH^-(aq)[/tex]

In the above mentioned reaction, potassium ions ([tex]\rm K^+[/tex]) and hydroxide ions ([tex]\rm OH^-[/tex]) are generated by the dissociation of KOH.

Therefore, KOH is a base because it produces hydroxide ions ([tex]\rm OH^-[/tex]) when it dissociates in water.

Learn more about Chemical Equation here:

https://brainly.com/question/28294176

#SPJ4

The number of moles of krypton in a cylinder containing 17 L of krypton at 22.8 atm and 112 degrees Celsius is 6.47 moles.

There seems to be a typo in the question as it states that the cylinder contains Argon (Ar) but then asks for the number of moles of Krypton (Kr). Assuming the gas in the cylinder is Krypton, we can use the ideal gas law to calculate the number of moles:

PV = nRT

where P is the pressure in atm, V is the volume in liters, n is the number of moles, R is the gas constant (0.082 L·atm/mol·K), and T is the temperature in Kelvin.

First, we need to convert the temperature from Celsius to Kelvin:

T = 112°C + 273.15 = 385.15 K

Now we can plug in the values and solve for n:

n = PV/RT

n = (22.8 atm)(17 L)/(0.082 L·atm/mol·K)(385.15 K)

n ≈ 20.3 moles

Therefore, there are approximately 20.3 moles of Krypton in the cylinder.

To know more about the krypton refer here :

https://brainly.com/question/2364337#

#SPJ11

D. Solution A will take longer to dissolve and might have some undissolved salt remaining at the bottom of the solution due to the low temperature.

In Solution A, the salt is in large clumps, the solvent is cold water, and the agitation is slow stirring. These factors contribute to a slower dissolution process. Large clumps have less surface area exposed to the solvent, cold water has less energy to break the ionic bonds between salt ions, and slow stirring provides less agitation to promote dissolution.

Consequently, it will take longer for the salt to dissolve in Solution A, and there might be undissolved salt remaining at the bottom.

to know more about temperature refer here

https://brainly.com/question/11464844#

#SPJ11

The volume of the balloon after the dry ice sublimes will be 3.40 L at STP.

The balanced chemical equation for the sublimation of solid CO₂ is:

CO₂(s) → CO₂(g)

At STP (standard temperature and pressure), which is 0°C (273.15 K) and 1 atm (101.325 kPa), one mole of any ideal gas occupies 22.4 L of volume. We can use this information to calculate the volume of CO₂ gas produced by the sublimation of 7.00 g of dry ice.

First, we need to convert the mass of dry ice to moles of CO₂ using the molar mass of CO₂, which is 44.01 g/mol:

7.00 g CO₂ × (1 mol CO₂/44.01 g CO₂) = 0.159 moles CO₂

Next, we can use the ideal gas law to calculate the volume of CO₂ gas produced:

PV = nRT

where P is the pressure (1 atm), V is the volume we want to find, n is the number of moles of CO₂ (0.159 moles), R is the gas constant (0.08206 L·atm/mol·K), and T is the temperature (273.15 K):

V = nRT/P = (0.159 mol)(0.08206 L·atm/mol·K)(273.15 K)/(1 atm) = 3.40 L

To know more about sublimes, refer here:

https://brainly.com/question/28626755#

#SPJ11

The percentage composition by mass of Y in the hypothetical compound X2Y5Z3 is 34.53%.

To calculate the percentage composition by mass of Y in the hypothetical compound X2Y5Z3, we first need to calculate the total molar mass of the compound:

Total molar mass = (2 moles of X x 13.25 amu/mole) + (5 moles of Y x 69.23 amu/mole) + (3 moles of Z x 109.34 amu/mole)
Total molar mass = 26.50 amu + 346.15 amu + 328.02 amu
Total molar mass = 700.67 amu

Next, we can calculate the percentage composition by mass of Y:

percentage composition by mass of Y = (mass of Y / total molar mass) x 100%
percentage composition by mass of Y = (5 moles of Y x 69.23 amu/mole / 700.67 amu) x 100%
percentage composition by mass of Y = 34.53%

Therefore, the percentage composition by mass of Y in the hypothetical compound X2Y5Z3 is 34.53%.

Know more about Percentage Composition here:

https://brainly.com/question/11952337

#SPJ11

If an electron is released during radioactive decay, the type of decay that has taken place is beta decay.

In beta decay, a neutron within the nucleus is converted into a proton, releasing an electron (also called a beta particle) in the process.

In alpha decay an alpha particle is emitted from the atomic nucleus and a new atomic nucleus is formed. So, no release of electron is there.

In gamma decay the unstable nuclei release excess energy by continuous electromagnetic process. This does not involve release of electron.

The electromagnetic decay also do not involve the release of an electron.

Thus option b is the correct answer.

To know more about beta decay visit:

https://brainly.com/question/27770519

#SPJ11

The result is negative, this means the reaction is not spontaneous under standard conditions. In other words, a lithium-sulfur battery cannot be constructed under standard conditions.

To calculate the potential for the reaction of Li(s) with S(s), we need to use the reduction potentials and the Nernst equation:

Ecell = Ereduction(cathode) - Ereduction(anode)

where Ereduction is the reduction potential, cathode is the reduction half-reaction occurring at the cathode (where reduction occurs) and anode is the oxidation half-reaction occurring at the anode (where oxidation occurs).

In this case, Li(s) is the anode and S(s) is the cathode. So, we need to flip the sign of the reduction potential for the anode:

Ecell = E(S2-/S) - (-E(Li+/Li))

Ecell = 0.48 V - 3.05 V

Ecell = -2.57 V

To know more about lithium-sulfur battery refer to-

https://brainly.com/question/31104871

#SPJ11

The addition of ammonia increase the solubility of slightly soluble salt AgCl as : ammonia forms very soluble complex ion by coordinating to Ag and removing it from solution. This shifts the solubility equilibrium to right.

When ammonia (NH₃) is added to a solution containing AgCl, it can coordinate with silver ions (Ag+) to form a complex ion called [Ag(NH₃)₂]+, which is highly soluble in water. This complex ion removes the Ag+ ions from the solution, thereby decreasing the concentration of Ag+ in the solution. According to Le Chatelier's principle, this will shift the equilibrium of AgCl dissolution reaction to the right, resulting in increase in the solubility of AgCl.

To know more about solubility, refer

https://brainly.com/question/23946616

#SPJ1

1. Moles of CO₂ is 0.8047.

2. Moles of C is 1.6094.

3. C:H ratio is 1:3.

4. The Emperial formula is c6H6.

5. Emperical formula mass is 78g/mol.

1. Moles of CO₂ = 24.41 g / 44.01 g/mol = 0.5548 mol; Moles of H₂O = 14.49 g / 18.02 g/mol = 0.8047 mol

2. Moles of C = 0.5548 mol (1 C atom in CO₂); Moles of H = 0.8047 mol * 2 (2 H atoms in H₂O) = 1.6094 mol

3. C:H ratio = 0.5548:1.6094 ≈ 1:3 (divide by smallest value), but 1:2.89 is closer, which gives a ratio of 6:6 (multiply by 3 to get whole numbers)

4. Empirical formula: C₆H₆

5. Empirical formula mass: (6 * 12.01) + (6 * 1.01) = 78 g/mol. Molecular formula: (246 g/mol) / (78 g/mol) = 3; C₆H₆ * 3 = C₁₂H₁₂ (molecular formula)

To know more about Molecular formula click on below link:

https://brainly.com/question/14425592#

#SPJ11

In fire, the energy released is slower as compared to the explosion in which the energy released is faster and more damaging.

Fires and Explosions are phenomena that releases a high amount of heat and light into their surrounding. Both of them causes the surroundings to burn down if they are not performed or caused in a controlled environment.

However, the main difference between the two is the rate at which the energy is released. In a fire, the energy which is released be it heat energy or light energy, the energy is released slowly through combustion as compared to explosions. Fires basically involve a sustained combustion process.

In an explosion the energy that is released at an extreme rate, it creates shockwaves that can cause damage significantly to its surrounding. Explosions are a one-time event.

Learn more about Combustion at:

https://brainly.com/question/28469125

#SPJ1

The wave property that should be tested in this experiment is absorption, which refers to the extent to which a material can absorb sound waves. The correct answer is option a.

By testing how different materials interact with sound waves from the straw horn, the student can gain insight into the properties of those materials and their ability to absorb sound.

A. Wave property: absorption

Method: playing the straw horn in a room with hard surfaces and a room with soft surfaces

To test this property, the student should play the straw horn in a room with hard surfaces, such as walls and floors made of concrete or tile, and a room with soft surfaces, such as walls and floors made of carpet or drapes.

By comparing the sound produced in each room, the student can observe how the sound waves interact with different materials and how effectively each material absorbs the sound.

This method allows the student to investigate how different materials absorb sound waves and how this affects the sound produced by the straw horn. This information can be valuable in understanding how sound travels in different environments and how to optimize sound quality in different settings.

The correct answer is option a.

To know more about wave property refer to-

https://brainly.com/question/3381481

#SPJ11

0.490 moles of oxygen gas, O₂, are produced from 0. 980 moles of hydrogen peroxide, option A is correct.

The balanced chemical equation for the decomposition of hydrogen peroxide is:

2 H₂O₂ → 2 H₂O + O₂

According to the equation, 1 mole of oxygen gas is created for every 2 moles of hydrogen peroxide that breaks down.

So, to find the number of moles of oxygen gas produced from 0.980 moles of hydrogen peroxide, we can use a proportion:

1 mole of O₂ is created from 2 moles of H₂O₂.

0.980 moles of H₂O₂ produces x moles of O₂

x = (0.980 mol × 1 mol O₂) ÷ 2 mol H₂O₂

x = 0.490 mol

Hence, option A is correct.

To learn more about oxygen follow the link:

brainly.com/question/21220673

#SPJ4

The complete question is:

Given the following balanced reaction of hydrogen peroxide decomposing to form oxygen gas and water, how many moles of oxygen gas, O₂, are produced from 0. 980 moles of hydrogen peroxide?

A) 0.490 mol

B) 0.50 mol

C) 1.96 mol

The difference in the rate of sugar and acid reaction to the reaction between KI(aq) and Pb(NO₃)₂(aq) can be explained by the type of chemical bonding present in each case. In the case of sugar and acid, the reaction is a covalent bond breaking and forming process that occurs gradually and can take time to complete.

Covalent bonds are relatively strong and require more energy to break, which can result in slower reaction rates.

On the other hand, the reaction between KI(aq) and Pb(NO₃)₂(aq) involves the formation and breaking of ionic bonds. Ionic bonds are relatively weaker than covalent bonds and require less energy to break, resulting in faster reaction rates.

Additionally, the presence of water in the reaction between KI(aq) and Pb(NO₃)₂(aq) can also speed up the reaction by facilitating the movement of ions and increasing their collision frequency.

To know more about the Covalent bonds refer here :

https://brainly.com/question/19382448#

#SPJ11

The change in Gibbs free energy for a reaction will be ∆G = 76.8 kJ/mol, as calculated in the below section.

Using the below relationship for change in Gibbs free energy, the change in enthalpy can be calculated as follows.

∆G = ∆H - T∆S

We can use this equation to find ∆H:

∆H = ∆G + T∆S

∆G = -64.76 kJ/mol

T = 132 + 273 = 405K

∆S = 676.54 J/Kmol = 0.677 kJ/Kmol

(change units to match those of ∆G)

∆H = -64.76 + (405)(0.677) = -64.76 + 274

∆H = + 209.4 kJ/mol

Now we can use this to find ∆G at -77.1ºC  (196K)

∆G = ∆H - T∆S

∆G = 209.4 kJ/mol - (196K)(0.677 kJ/Kmol)

∆G = 209.4 - 132.6

∆G = 76.8 kJ/mol

To learn more about Gibbs free energy check the link below-

https://brainly.com/question/9179942

#SPJ4

To determine the rate of production of the final product and its composition, we can start by calculating the mass balance for the alcohol in the system.

Given:

Feed rate = 2.0 t/h

Alcohol content in the feed = 15%

Water content in the feed = 82%

Bottoms composition: 94% water, 3.5% inert material, and 2.5% alcohol

We can assume that the inert material remains constant throughout the process, so we only need to consider the alcohol and water components.

Calculation of alcohol mass in the feed:

Alcohol mass in feed = Feed rate * Alcohol content

= 2.0 t/h * 0.15

= 0.3 t/h

Calculation of water mass in the feed:

Water mass in feed = Feed rate * Water content

= 2.0 t/h * 0.82

= 1.64 t/h

Calculation of alcohol mass in the bottoms:

Alcohol mass in bottoms = Alcohol mass in feed * Bottoms composition (alcohol)

= 0.3 t/h * 0.025

= 0.0075 t/h

Calculation of water mass in the bottoms:

Water mass in bottoms = Water mass in feed * Bottoms composition (water)

= 1.64 t/h * 0.94

= 1.5416 t/h

Calculation of alcohol mass in the product:

Alcohol mass in product = Alcohol mass in feed - Alcohol mass in bottoms

= 0.3 t/h - 0.0075 t/h

= 0.2925 t/h

Calculation of water mass in the product:

Water mass in product = Water mass in feed - Water mass in bottoms

= 1.64 t/h - 1.5416 t/h

= 0.0984 t/h

Therefore, the rate of production of the final product is 0.2925 t/h, and its composition is approximately 2.5% alcohol and 97.5% water.

To know more aboutproduction refer here

https://brainly.com/question/22852400#

#SPJ11

The net ionic equation when the ammonium nitrate is dissolved in the water :

NH₄NO₃(s) + H₂O(l) ⇄ NH₄⁺(aq)  + NO₃⁻(aq)

The component that will ionizes in the aqueous solution that is the ammonium ion. The nitrate ion is that does not ionize in the aqueous solution.

The acid-base hydrolysis in equilibrium that is the established when the ammonium nitrate is dissolved in the water, the net ionic equation is as :

NH₄NO₃(s) + H₂O(l) ⇄ NH₄⁺(aq)  + NO₃⁻(aq)

The ions has the equal and the oppisite charges. They both can combine in the electrically neutral ratio of the 1:1.  The net ionic equation can be depicts by the molecules and the ions.

To learn more about net ionic equation here

https://brainly.com/question/29299745

#SPJ4

The given reaction is a reversible reaction where reactants (4NH₃(g) + 3 O₂(g)) combine to form products (2N₂ + 6H₂O(g)) and vice versa. At equilibrium, both reactants and products are present in concentrations such that the rate of the forward reaction is equal to the rate of the backward reaction. This state is called equilibrium.

To determine which species would be present in higher concentration at equilibrium, we need to analyze the thermodynamic favorability of the reaction. The change in Gibbs free energy (ΔG) is a measure of thermodynamic favorability, where a negative ΔG indicates that the reaction is spontaneous and favorable in the forward direction.

In this case, the given value of ΔG is -1360 kJ/mol, which is a large negative value. This suggests that the forward reaction (4NH₃(g) + 3 O₂(g) → 2N₂ + 6H₂O(g)) is highly favorable thermodynamically.The equilibrium constant (Kc) is another important parameter that helps to determine the species present at equilibrium.

Kc is the ratio of the product of the concentrations of the products raised to their stoichiometric coefficients to the product of the concentrations of the reactants raised to their stoichiometric coefficients. The higher the value of Kc, the greater the concentration of the products at equilibrium.

In this reaction, the equilibrium constant is calculated by using the formula:

Kc = ([N₂]² [H₂O]⁶) / ([NH₃]⁴ [O₂]³)

As the value of Kc is greater than 1, it suggests that at equilibrium, the products (N₂ and H₂O) would be present in higher concentrations as compared to the reactants (NH₃ and O₂). This is due to the thermodynamic favorability of the reaction, where the forward reaction is more favorable than the backward reaction.

In conclusion, at equilibrium, the species present in higher concentrations would be N₂ and H₂O, due to the thermodynamic favorability of the reaction and the high value of the equilibrium constant.

To know more about reversible reaction  refer here

https://brainly.com/question/16614705#

#SPJ11

An atom with too many neutrons relative to protons is said to be unstable and can undergo radioactive decay to become more stable. There are several types of radioactive decay, including alpha decay, beta decay, and gamma decay.

In alpha decay, the unstable atom emits an alpha particle, which is a helium nucleus consisting of two protons and two neutrons. This results in a new nucleus with two fewer neutrons and two fewer protons.

In beta decay, the unstable atom emits a beta particle, which is either an electron or a positron. When an atom emits an electron, one of its neutrons is converted into a proton, and the atomic number of the atom increases by one. When an atom emits a positron, one of its protons is converted into a neutron, and the atomic number of the atom decreases by one.

In gamma decay, the unstable atom emits a gamma ray, which is a high-energy photon. Gamma decay does not change the number of protons or neutrons in the nucleus but instead releases excess energy.

To know more about radioactive decay refer to-

https://brainly.com/question/1770619

#SPJ11

While balancing equation write the physical state of reactants and products as well as any reaction conditions.

Reactants are the substances that are present at the start of a chemical reaction. They are typically the substances that are used up during the reaction and are converted into different products. Reactants are usually written on the left side of a chemical equation, while the products are written on the right side. Reactants are essential components of any chemical reaction and are essential in order for the reaction to take place. Reactants are also known as substrates or starting materials.

Balancing the Following Equations:

1) CuSO4(s) + 2KI(aq) → Cu2I2(s) + K2SO4(aq) + I2(g)

2) 2NH3(g) + O2(g) → 2NO(g) + 2H2O(g)

3) 3Fe2O3(s) + 4CO(g) → 6Fe(s) + 3CO2(g)

4) Cu(s) + 2AgNO3(aq) → Cu(NO3)2(aq) + 2Ag(s)

5) 2Pb(NO3)2(aq) + H2SO4(aq) → PbSO4(s) + 2HNO3(aq)

6) CaCO3(s) + 2HCl(aq) → CaCl2(aq) + H2O(l) + CO2(g)

7) 2MnO2(s) + 4HCl(aq) → 2MnCl2(aq) + 2H2O(l) + Cl2(g)

To learn more about reactants

https://brainly.com/question/26283409

#SPJ4

The product is HI

There are six product molecule

Hydrogen is the limiting reactant

There is one iodine molecule in excess

To determine the limiting reactant in a chemical reaction, you need to compare the number of moles of each reactant present to the stoichiometry of the balanced chemical equation.

The limiting reactant is the reactant that is completely consumed in a chemical reaction, and which therefore limits the amount of product that can be formed. The other reactant, which is not completely consumed, is called the excess reactant.

Learn more about limiting reactant:https://brainly.com/question/14225536

#SPJ1