A student adds 7.00 g of dry ice (solid co2) to an empty balloon. what will be the volume of the balloon at stp after all the dry ice sublimes (converts to gaseous co2)

An unmanned spacecraft is a type of spacecraft that is designed and programmed to operate without human crew on board.

These spacecraft are sent from Earth to explore various objects in space, such as planets, moons, asteroids, comets, and other celestial bodies. They are used to gather scientific data, images, and other important information that can help us learn more about the universe.

The unmanned spacecraft is equipped with a variety of instruments and sensors that allow it to study the object it is exploring. These instruments can include cameras, spectrometers, radar systems, and other scientific instruments. The spacecraft is controlled remotely from Earth, and the data it collects is transmitted back to Earth for analysis.

One of the main advantages of using unmanned spacecraft is that they can operate in environments that are too dangerous or inhospitable for humans. For example, unmanned spacecraft can explore the harsh and extreme environments of other planets or moons, where humans cannot survive.

Additionally, unmanned spacecraft are often less expensive to launch and operate than crewed missions, making them a more cost-effective option for space exploration.

In summary, unmanned spacecraft are an essential tool for exploring the vast expanse of space. They allow us to gather important data and information about our universe, and they are a key component of modern space exploration.

To know more about spacecraft, visit:

https://brainly.com/question/13478702#

#SPJ11

The correct answer is C. 7.0. The isolectric point for this molecule is 7.0.

First, list the pka states that the tripeptide glycylarginylglutamate which can be found

pKa_1 = 2.1

pKa_2 = 4.1

pKa_3 = 9.8

pKa_4 = 12.5

The tripeptide, Ala-Arg_Asp. The three peptide bonds that are derived from the three amino acids are called tripeptides. A few examples of tripeptides are glutathione, Eisenin, GHK-Cu, etc. tripeptides are most commonly used for improving the look of ageing signs in the skin. Now it is necessary to find the isoelectric point (pI)

pl = SUM(pKa_1 + ... + pka_n)/n

pl = (2.1 + 4.1 + 9.8 + 12.5)/4

pl = 7.1 which is approximately 7.0.

The isolectric point for this molecule is 7.0.

To learn more about tripeptide check the link below-

https://brainly.com/question/28295128

#SPJ4

Complete question-

The tripeptide glycylarginylglutamate contains four ionizable groups with pKas of 2.1, 4.1 9.8, and 12.5. Calculate the pI for this molecule.

A. 3.1

B. 6.4

C. 7.0

D. 8.3

E. 7.3

A total of 0.0103 moles of barium phosphate will react with 1.60 g of aluminum hydroxide.

The balanced chemical equation for the reaction between barium phosphate and aluminum hydroxide is:

Ba₃(PO₄)₂ + 2 Al(OH)₃ → 2 AlPO₄ + 3 Ba(OH)₂

To calculate the moles of barium phosphate that will react with 1.60 g of aluminum hydroxide, we need to convert the given mass of aluminum hydroxide into moles using its molar mass:

Molar mass of Al(OH)₃ = 78 g/mol

Number of moles of Al(OH)₃ = 1.60 g / 78 g/mol = 0.0205 mol

According to the balanced chemical equation, 2 moles of Al(OH)3 react with 1 mole of Ba3(PO4)2. Therefore, the number of moles of Ba₃(PO₄)₂ required can be calculated as:

Number of moles of Ba₃(PO₄)₂ = (0.0205 mol Al(OH)₃) / 2 = 0.0103 mol

To know more about balanced chemical equation click on below link:

https://brainly.com/question/28294176#

#SPJ11

Darwin proposed a new theory of how evolution works, which he called "natural selection."

This theory suggests that the species that are best adapted to their environment are more likely to survive and reproduce, passing on their advantageous traits to their offspring. Over time, these advantageous traits become more common in the population, leading to the evolution of new species.

Darwin's theory of natural selection was a revolutionary idea that challenged traditional beliefs about the origin and diversity of life on Earth. Today, it is widely accepted as the mechanism that drives evolution, and has been supported by numerous scientific studies and observations.

Darwin's work continues to inspire new research and discoveries in the field of evolutionary biology, and his legacy as one of the most influential scientists in history remains strong to this day.

To know more about Darwin, visit:

https://brainly.com/question/27812304#

#SPJ11

Particle size is typically measured in units such as micrometers (µm) or nanometers (nm), which represent very small lengths on the order of thousandths or millionths of a meter, respectively.

4.2 cm is much larger than the typical size of particles and is more in the range of everyday objects.

For example, 4.2 cm is roughly the size of a golf ball or a small tomato. If you have additional information about the particle's size, such as its shape or the material it is made of, I may be able to provide more specific guidance.

Also, a particle that is 4.2 nanometers (nm) in size falls in the range of nanoscale particles, which are typically much smaller than everyday objects and are invisible to the nakεd eye.

The size of the particle can provide some clues about its potential identity or classification, but additional information about its properties, composition, and context is needed to determine its specific identity.

Learn more about particle size here: https://brainly.com/question/29097852

#SPJ1

The limiting reactant in the chemical reaction is O₂ because because the O₂ contains the higher starting mass. The correct option is D.

The chemical equation is as :

2H₂ + O₂  --->  2H₂O

The mass of the H₂  = 0.4 g

The molar mass of the H₂  = 2 g/mol

The moles of the H₂  = mass / molar mass

The moles of the H₂  = 0.4 / 2

The moles of the H₂  = 0.2 mol

The mass of the O₂  = 1.8 g

The molar mass of the O₂  = 32 g/mol

The moles of the O₂  = mass / molar mass

The moles of the O₂  = 1.8 / 32

The moles of the O₂  = 0.056 mol

2 moles of H₂  react with 1 mol of O₂

0.056 mol of O₂ react with = 2 × 0.056 = 0.112 mol of H₂

The O₂ is the limiting reactant. The correct option is D.

To learn more about limiting reactant here

https://brainly.com/question/31897248

#SPJ1

potassium + chlorine → potassium chloride

hydrogen + iodine → hydrogen iodide

A synthesis reaction is a type of chemical reaction in which two or more simple substances combine to form a more complex product. In a synthesis reaction, the reactants come together to create a single compound, usually with the release of energy in the form of heat or light. The general equation for a synthesis reaction is A + B → AB, where A and B are the reactants, and AB is the product.

Synthesis reactions are also known as combination reactions because they involve the combination of two or more substances to form a new compound.

Learn more about synthesis reaction, here:

https://brainly.com/question/16987748

#SPJ1

According to the balanced chemical equation, 1 mole of SiC is produced from 1 mole of C. Therefore, the number of moles of SiC produced from 9.3 moles of C is also 9.3 moles.

The balanced chemical equation for the reaction between SiO₂ and C to produce SiC and CO is:

SiO₂ + C ⇒ SiC + CO

The stoichiometric coefficients of C and SiC are both 1. This means that for every 1 mole of C reacted, 1 mole of SiC is produced. Therefore, if we have 9.3 moles of C, we can expect to produce 9.3 moles of SiC.

It is important to note that the balanced chemical equation assumes that the reaction goes to completion, meaning that all of the reactants are consumed and converted into products. In reality, some of the reactants may not be fully consumed, leading to a lower yield of the desired product.

To learn more about moles follow the link:

brainly.com/question/31597231

#SPJ4

Red tape can be used to repair a broken taillight on a car. Different colors of light are transmitted through the tape, while the color red is reflected back and absorbed by the tape, allowing it to emit a red light.

This is due to the tape's properties and the way it interacts with the light spectrum. In general, light is transmitted through transparent or translucent materials, while opaque materials absorb and reflect light.

The color of an object is determined by the wavelengths of light that are absorbed and reflected by its surface. So, in the case of the red tape, it absorbs all colors of light except for red, which it reflects back, allowing the tape to emit a red light when placed over a broken taillight.

To know more about broken taillight  refer here

https://brainly.com/question/16647309#

#SPJ11

From the balanced chemical equation, we can see that for every 1 mole of NaOH reacted, we get 1 mole of NaClO produced. Therefore, 4.6 moles of NaOH are needed to form 2.3 moles of NaClO.

The chemical equation for the reaction balances out as follows:

2NaOH + Cl2 → NaCl + NaClO + H₂O

From the equation, we can see that 2 moles of NaOH react with 1 mole of Cl₂, 1 mole of NaCl, 1 mole of NaClO, and 1 mole of water. Therefore, the stoichiometric ratio of NaOH to NaClO is 2:1, i.e., 2 moles of NaOH reacts with 1 mole of NaClO.

To find out how many moles of NaOH are needed to form 2.3 moles of NaClO, we can use the following proportion:

2 moles NaOH : 1 mole NaClO = x moles NaOH : 2.3 moles NaClO

By cross-multiplication, we get:

2 moles NaOH × 2.3 moles NaClO = 1 mole NaClO × x moles NaOH

4.6 moles NaOH = x moles NaOH

To learn more about equation follow the link:

brainly.com/question/30087623

#SPJ4

The product of the reaction between methyl propanoate and CH3MgBr, followed by H3O+ is an alcohol, specifically, 2-methyl-2-propanol.

Methyl propanoate is an ester compound made up of three carbon atoms and eight hydrogen atoms. It is a colorless liquid with a slightly sweet odor. Methyl propanoate is produced through the reaction of an alcohol and an acid. The acid used is propionic acid and the alcohol is methanol. The reaction is a condensation reaction, meaning two molecules combine to form one larger molecule with a water molecule as a by-product. Methyl propanoate is used as a solvent and a flavoring agent in foods and beverages.

This is derived from the acyl portion of the methyl propanoate, which is a carboxylic acid. The reaction proceeds via a nucleophilic acyl substitution mechanism, where the CH3MgBr acts as a nucleophile, displacing the OH group from the carboxylic acid, forming a carboxylate ion. This is then protonated by the H3O+, forming the desired alcohol product. The product is represented in the following structure:

O

|

CH3-C-OH  =>  CH3-C-O-MgBr  =>  CH3-C-OH + H3O+

To learn more about methyl propanoate

https://brainly.com/question/30173441

#SPJ4

The carbon chain in a saturated fatty acid is straight and linear due to single bonds, while the carbon chain in a monounsaturated fatty acid has one bend caused by a double bond, and the carbon chain in a polyunsaturated fatty acid has multiple bends due to multiple double bonds.

Compare the shape of the carbon chain in a saturated fatty acid, a monounsaturated fatty acid, and a polyunsaturated fatty acid.
1. Saturated fatty acid: The carbon chain in a saturated fatty acid contains single bonds between all the carbon atoms. This results in a straight, linear shape, as each carbon atom is fully saturated with hydrogen atoms.

2. Monounsaturated fatty acid: In a monounsaturated fatty acid, the carbon chain has one double bond between two carbon atoms. This double bond creates a bend or kink in the chain, as it results in a decrease in the number of hydrogen atoms bonded to the carbon atoms.

3. Polyunsaturated fatty acid: A polyunsaturated fatty acid contains two or more double bonds between carbon atoms in the chain. Each double bond causes a bend or kink in the chain, similar to the monounsaturated fatty acid. The presence of multiple double bonds leads to a more complex and irregular shape.

In summary, the carbon chain in a saturated fatty acid is straight and linear due to single bonds.

To know more about Polyunsaturated fatty acid:

https://brainly.com/question/12409149

#SPJ11

1) Some creative ways to change people's perception of bugs as pests could include highlighting the nutritional benefits of farming bugs for food, showcasing their role in sustainable agriculture, and promoting insect farming as a way to reduce reliance on traditional livestock farming, which can have negative environmental impacts.

2) There could be negative environmental impacts associated with foraging for and farming bugs such as habitat destruction and pesticide use. Additionally, large-scale insect farming operations could require significant resources like water and feed, potentially contributing to environmental degradation and resource depletion.

3) Insect farming could address some of the problems associated with food insecurity by providing a sustainable source of protein that is affordable and accessible to many communities. Insects require less feed and water than traditional livestock, can be raised in smaller spaces, and have a lower carbon footprint. This makes them a more efficient and sustainable food source, particularly in areas where resources are scarce.

4) Insect farming can address some of the problems associated with food insecurity (repeated question; refer to answer #3).

Learn more about "bugs": https://brainly.com/question/11073037

#SPJ11

Approximately 108,066 J of heat is required to heat 352 g of water from 20.0°C to 93.7°C in an electric kettle.

To determine the quantity of heat required to heat 352 g of water from 20.0°C to 93.7°C, we need to use the specific heat capacity of water and the equation:

q = m × c × ΔT

ΔT = change in temperature (in °C)

First, we need to calculate the change in temperature:

ΔT = final temperature - initial temperature

ΔT = 93.7°C - 20.0°C

ΔT = 73.7°C

Substituting the given values into the equation, we get:

q = 352 g × 4.184 J/g·°C × 73.7°C

q = 108,066.496 J

q ≈ 108,066 J (rounded to three significant figures)

To know more about initial temperature, here

brainly.com/question/31702242

#SPJ4

After three half-lives have passed, 2.50 g of the radioisotope would remain out of the initial 20.0 g.

If a radioisotope has a half-life of t, then the amount of the radioisotope that remains after n half-lives can be calculated using the formula:

[tex]N = N0 * (1/2)^n[/tex]

where N0 is the initial amount of the radioisotope.

If three half-lives have passed, then n = 3. Using the given initial amount of 20.0 g, we can calculate the amount that remains after three half-lives as follows:

[tex]N = N0 * (1/2)^n\\N = 20.0 g * (1/2)^3[/tex]

N = 20.0 g * (1/8)

N = 2.50 g

Therefore, after three half-lives have passed, 2.50 g of the radioisotope would remain out of the initial 20.0 g.

To know more about radioisotope refer to-

https://brainly.com/question/13076859

#SPJ11

The standard free energy change (∆G°) for the given reaction at 298K is -474.26 kJ/mol.

The given reaction is: [tex]2H_2(g) + O_2(g) - > 2H_2O(g)[/tex]

The standard free energy change (∆G°) for the given reaction can be calculated using the equation:

∆G° = Σ∆G°f(products) - Σ∆G°f(reactants)

Where ∆G°f is the standard free energy of formation for each compound in the reaction at standard conditions (298K and 1 atm pressure).

Using the standard free energy of formation values from tables, we get:

∆G° = 2(-237.13 kJ/mol) - [2(0 kJ/mol) + 1(0 kJ/mol)]

∆G° = -474.26 kJ/mol

The negative value indicates that the reaction is exergonic and spontaneous under standard conditions.

To know more about standard free energy, here

brainly.com/question/13625901

#SPJ4

--The complete Question is, What is the standard free energy change, ∆G°, in kJ, for the following reaction at 298K?

2H2(g) + O2(g) -> 2H2O(g) --

The mechanism for the E1 elimination reaction of 2-methylcyclohexanol with phosphoric acid is Protonation of the alcohol group by phosphoric acid.

Protonation is the process of adding a proton (hydrogen ion) to a molecule or atom. The process is also known as hydrogenation or hydrideation. It occurs when a molecule or atom gains a proton, which imparts a positive charge on the molecule or atom.

The mechanism for the E1 elimination reaction of 2-methylcyclohexanol with phosphoric acid is as follows:

Step 1: Protonation of the alcohol group by phosphoric acid.

Phosphoric acid (H₃PO₄) donates a proton to the OH group of 2-methylcyclohexanol, forming an oxonium ion (H₃O⁺). Electron flow is shown in the following diagram:

[tex]O-H + H_3PO4 \rightarrow H_3O^+ + PO_4^3-[/tex]

Step 2: Deprotonation by a base.

The oxonium ion (H3O+) is then deprotonated by a base (e.g. a strong base such as NaOH). Electron flow is shown in the following diagram:

[tex]H_3O^+ + B^- \rightarrow H_2O + BH^+[/tex]

Step 3: Rearrangement of the molecule.

The deprotonated molecule rearranges to form a more stable carbocation intermediate. Electron flow is shown in the following diagram:

[tex]BH^+ \rightarrow B^+ + H^-[/tex]

Step 4: Nucleophilic attack by the alcohol group.

The carbocation intermediate is attacked by the OH group of 2-methylcyclohexanol, forming a new carbon-oxygen bond. Electron flow is shown in the following diagram:

[tex]C^+ + OH- \rightarrow C-O + H^+[/tex]

Step 5: Loss of a proton.

The molecule then loses a proton, forming the product of the reaction. Electron flow is shown in the following diagram:

[tex]C-O + H^+ \rightarrow C=O + H_2O[/tex]

To learn more about Protonation

https://brainly.com/question/15215343

#SPJ4

The mass of the ionic compound dissolved in 100 g of water is 7.44 grams.

To solve this problem, we need to use the formula:

m = n x M x MW

where m is the mass of the compound in grams, n is the number of moles of the compound, M is the molarity of the solution, and MW is the molar mass of the compound.

First, we need to calculate the number of moles of the compound dissolved in 100 g of water:

density of solution = mass of solution / volume of solution

volume of solution = mass of solution / density of solution = 100 g / 1.094 g/mL = 91.29 mL = 0.09129 L

moles of compound = M x volume of solution = 0.531 mol/L x 0.09129 L = 0.0485 mol

Now, we can calculate the mass of the compound:

m = n x M x MW = 0.0485 mol x 153.5 g/mol = 7.44 g

Therefore, the mass of the ionic compound dissolved in 100 g of water is 7.44 grams.

To know more about ionic compound refer to-

https://brainly.com/question/3222171

#SPJ11

First, we need to use stoichiometry to find out how many moles of hydrogen gas are produced. From the balanced chemical equation, we can see that for every 1 mole of zinc (Zn), 1 mole of hydrogen gas (H2) is produced. Therefore, if we have 20.0 mol of Zn, we will also produce 20.0 mol of H2.

Next, we can use the formula for the mass of a gas:

mass = molar mass x number of moles

The molar mass of hydrogen gas is approximately 2.02 g/mol. Therefore, the mass of 20.0 mol of hydrogen gas would be:

mass = 2.02 g/mol x 20.0 mol
mass = 40.4 g

So, 40.4 grams of hydrogen gas are produced when 20.0 mol of Zn are added to excess hydrochloric acid.

Learn more about Hydrogen Gas : https://brainly.com/question/19813237

#SPJ11

If 33. 55 ml of 0. 150M NaOH neutralizes 0. 579g of HPro then the molar mass of proline is 115.08 g/mol.

To find the molar mass of proline, we need to first calculate the number of moles of HPro that reacted with the NaOH.

We can use the equation:

HPro + NaOH → NaPro + H2O

From the balanced equation, we can see that 1 mole of HPro reacts with 1 mole of NaOH.

Using the concentration and volume of NaOH, we can calculate the number of moles of NaOH used:

moles of NaOH = concentration x volume
moles of NaOH = 0.150 mol/L x 0.03355 L
moles of NaOH = 0.005033 mol

Since 1 mole of HPro reacts with 1 mole of NaOH, the number of moles of HPro used is also 0.005033 mol.

Now we can calculate the molar mass of HPro:

molar mass = mass / moles
molar mass = 0.579 g / 0.005033 mol
molar mass = 115.08 g/mol

Therefore, the molar mass of proline is 115.08 g/mol.

Know more about Amino Acid here:

https://brainly.com/question/28409615

#SPJ11

When 8.00 g of lithium reacts with [tex]AlCl_{3}[/tex], 10.39 g of aluminum is produced.

The molar mass of lithium (Li)= 6.94 g/mol

Moles of Li = mass of Li / molar mass of Li= 8.00 g / 6.94 g/mol = 1.154 moles

Now, 3 moles of Li produce 1 mole of Al
moles of Al produced = 1.154 moles / 3 = 0.385 moles

The molar mass of aluminum (Al)= 26.98 g/mol

Mass of Al = moles of Al × molar mass of Al= 0.385 moles × 26.98 g/mol = 10.39 g

So, when 8.00 g of lithium reacts with [tex]AlCl_{3}[/tex], 10.39 g of aluminum is produced.

To know more about stoichiometric calculations visit:

https://brainly.com/question/23742235

#SPJ11

The average atomic mass of element J is 79.854u as it determines the properties and behavior of the element in various chemical and physical processes.

To calculate the average atomic mass of element J, we need to use the formula:

Average atomic mass = (mass₁ × % abundance₁ + mass₂ x % abundance₂) ÷ 100

where mass₁ and mass₂ are the atomic masses of the two isotopes and % abundance₁ and % abundance₂ are their respective relative abundances.

Substituting the values given in the problem, we get:

Average atomic mass of J = (78.92u x 50.69% + 80.92u x 49.31%) ÷ 100

= (40.05148u + 39.80252u) ÷ 100

= 79.854u

To learn more about atomic follow the link:

brainly.com/question/5661976

#SPJ4

Fragments of weathered rocks can be moved by wind, air, or water.

Weathering is a natural process that breaks down rocks and minerals into smaller pieces. When a rock is weathered, it may physically or chemically change due to exposure to elements such as water, wind, ice, and temperature changes.

Physical weathering refers to the breakdown of rock through mechanical processes, such as abrasion, pressure changes, and freeze-thaw cycles.

Chemical weathering involves the breakdown of rock through chemical reactions, such as oxidation, hydrolysis, and dissolution.

In both cases, the resulting smaller pieces of rock or mineral fragments may be moved by wind, air, or water, and may be transported to new locations.

More on rock weathering can be found here: https://brainly.com/question/29762374

#SPJ1

Magnesium loses two electrons to oxygen to form Mg²⁺ and O²⁻ ions. The ionic formula for this compound can be predicted by writing the formula unit that balances the charges of the two ions. The ionic formula for magnesium oxide is MgO.

The Lewis dot structure of magnesium is Mg with two dots representing its valence electrons. The Lewis dot structure of oxygen is O with six dots representing its valence electrons.

Magnesium and oxygen form an ionic compound because magnesium loses two electrons to oxygen to form Mg²⁺ and O²⁻ ions. The ionic formula for this compound can be predicted by writing the formula unit that balances the charges of the two ions.

Since Mg²⁺ has a 2+ charge and O²⁻ has a 2- charge, the ionic formula for magnesium oxide is MgO.

To know more about the Lewis dot structure refer here :

https://brainly.com/question/20300458#

#SPJ11

The law that applies to this problem is Charles's Law.

The equation for Charles's Law is [tex]\frac{V_{1} }{T_{1} }[/tex] = [tex]\frac{V_{2} }{T_{2} }[/tex]

The original temperature of sulfur dioxide was 185.12 K.

The law that applies to this problem is Charles's Law, which states that at constant pressure, the volume of a fixed amount of gas is directly proportional to its temperature in kelvin.

The equation for Charles's Law is [tex]\frac{V_{1} }{T_{1} }[/tex] = [tex]\frac{V_{2} }{T_{2} }[/tex], where [tex]V_{1}[/tex] is the initial volume, [tex]T_{1}[/tex] is the initial temperature, [tex]V_{2}[/tex] is the final volume, and [tex]T_{2}[/tex] is the final temperature.

Using the given values, we can plug them into the equation and solve for the initial temperature:

[tex]\frac{V_{1} }{T_{1} }[/tex] = [tex]\frac{V_{2} }{T_{2} }[/tex]
20.923/[tex]T_{1}[/tex] = 29.508/260.93

Multiplying both sides by [tex]T_{1}[/tex] and dividing by 29.508, we get:

[tex]T_{1}[/tex] = (20.923/29.508) x 260.93 = 185.02 K

Therefore, the original temperature of sulfur dioxide was 185.12 K.

The answer with correct units is 185.12 K.

To know more about Charles's Law visit:

https://brainly.com/question/16927784

#SPJ11

The answer to the part A, B, C, D and E are as follows-

Part A: [tex][H3O+] [OH−] pOH[/tex] pH Acidic or Basic

1.0×10−8 1.0×10−6 6.00 8.00 basic

1.0×10−5 1.0×10−9 9.00 5.00 acidic

9.7×10−9 1.0×10−5 5.00 8.99 basic

[tex]1.0×10−14 1.0×10^14 14.00 0.00 neutral\\1.0×10^−3 1.04×10^−11 11.98 2.00 acidic[/tex]

Part B:

[tex][H3O+] [OH−] pOH[/tex] pH Acidic or Basic

1.0×10−8 1.0×10−6 6.00 8.00 basic

1.0×10−5 1.0×10−9 9.00 5.00 acidic

9.7×10−9 1.0×10−5 5.00 8.99 basic

[tex]1.0×10−14 1.0×10^14 14.00 0.00 neutral\\1.0×10^−3 1.04×10^−11 11.98 2.00 acidic[/tex]

Part C:

[tex][H3O+] [OH−] pOH[/tex]pH Acidic or Basic

1.0×10−8 1.0×10−6 6.00 8.00 basic

1.0×10−5 1.0×10−9 9.00 5.00 acidic

9.7×10−9 1.0×10−5 5.00 8.99 basic

[tex]1.0×10−14 1.0×10^14 14.00 0.00 neutral\\1.0×10^−3 1.04×10^−11 11.98 2.00 acidic[/tex]

Part D:

[tex][H3O+] [OH−] pOH[/tex]pH Acidic or Basic

1.0×10−8 1.0×10−6 6.00 8.00 basic

1.0×10−5 1.0×10−9 9.00 5.00 acidic

9.7×10−9 1.0×10−5 5.00 8.99 basic

[tex]1.0×10−14 1.0×10^14 14.00 0.00 neutral\\1.0×10^−3 1.04×10^−11 11.98 2.00 acidic[/tex]

Part E:

[tex][H3O+] [OH−] pOH[/tex]pH Acidic or Basic

1.0×10−8 1.0×10−6 6.00 8.00 basic

1.0×10−5 1.0×10−9 9.00 5.00 acidic

9.7×10−9 1.0×10−5 5.00 8.99 basic

[tex]1.0×10−14 1.0×10^14 14.00 0.00 neutral\\1.0×10^−3 1.04×10^−11 11.98 2.00 acidic[/tex]

To know more about acidic refer to-

https://brainly.com/question/14072179

#SPJ11

The maximum amount of iron (II) oxide that can be formed is 176.9 g if 23.1 g of iron reacts with 53.22 g of oxygen to produce iron (ii) oxide.

The balanced chemical equation for the reaction between iron and oxygen to produce iron (II) oxide is:

4Fe + 3O₂ → 2Fe₂O₃

From the equation, we can see that 4 moles of iron react with 3 moles of oxygen to produce 2 moles of iron (II) oxide.

Calculate the number of moles of each reactant using their respective molar masses:

Number of moles of iron = 23.1 g ÷ 55.845 g/mol

= 0.414 moles

Number of moles of oxygen = 53.22 g ÷ 32 g/mol

= 1.663 moles

Since the stoichiometric ratio of iron to oxygen is 4:3, we can see that oxygen is the limiting reactant because there are only 3 moles of oxygen available for every 4 moles of iron required.

Number of moles of Fe₂O₃ = 2 ÷ 3 × 1.663

= 1.108 moles

Mass of Fe₂O₃ = 1.108 moles × 159.69 g/mol

= 176.9 g

To learn more about oxide follow the link:

brainly.com/question/15319480

#SPJ4

Answer:

C

Explanation:

First of all, the law of conservation of matter states that " In an ordinary chemical reaction, the mass of the products is equal to the mass of the reactants."

So, the answer should be C since the mass of Al and O₂ is equal on both the reactant's and product's side.

4Al + 3O₂ → 2Al₂O₃

Reactants Side: 4 aluminum and 6(3*2) oxygen

Products Side: 4(2*2) aluminum and 6(2*3) oxygen

The volume of the expensive ice cream is: 0.

Densities of the cheap and expensive ice creams, we need to first convert the weights of the ice creams from pounds to kilograms.

1 pound = 0.453592 kilograms

Therefore, the weight of the cheap ice cream in kilograms is:

5 pounds * 0.453592 kilograms/pound = 2. 027 kilograms

The weight of the expensive ice cream in kilograms is:

0 pounds * 0.453592 kilograms/pound = 3. 903 kilogram

The volume of a gallon of ice cream is approximately 3785 milliliters. Therefore, the volume of the cheap ice cream is:

027 kilograms / 3785 milliliters = 0.000557 cubic meters

The volume of the expensive ice cream is:

903 kilograms / 3785 milliliters = 0.00091 cubic meters

The densities of the cheap and expensive ice creams, we can use the following formula:

density = mass / volume

The densities of the cheap and expensive ice creams can then be calculated using the following formula:

density = mass / volume

The mass of the cheap ice cream is:

027 kilograms

The volume of the cheap ice cream is:

0.000557 cubic meters

Therefore, the density of the cheap ice cream is:

027 kilograms / 0.000557 cubic meters = 35. 14 kilograms/cubic meter

The mass of the expensive ice cream is:

903 kilograms

The volume of the expensive ice cream is: 0.

Learn more about volume Visit: brainly.com/question/27710307

#SPJ4

(A) Helium gas would effuse faster than nitrogen gas. (B) The rate of effusion of helium to nitrogen gas is approximately 4:1. (C) It would take helium gas approximately 5.5 seconds to effuse.

Part (A): The rate of effusion is directly proportional to the velocity of the gas particles, which is inversely proportional to the square root of their masses.

Helium gas has a smaller molar mass (4 g/mol) than nitrogen gas (28 g/mol), which means its particles have a higher velocity and would effuse faster.

Part (B): According to Graham's law of effusion, the rate of effusion of two gases is inversely proportional to the square root of their molar masses.

Therefore, the rate of effusion of helium to nitrogen gas can be calculated as the square root of the ratio of their molar masses, which is approximately 4:1.

Part (C): Using Graham's law of effusion again, we can set up a proportion to find the time it would take helium gas to effuse if nitrogen gas takes 22 seconds.

The ratio of the square roots of their molar masses is 1:√7, so the proportion is:

√(4/28) : √(1/√7) = 22 : x

Solving for x, we get approximately 5.5 seconds.

To know more about Graham's law, refer here:

https://brainly.com/question/8804761#

#SPJ11