A 31. 0 mL sample of 0. 624M perchloric acid is titrated with a 0. 258M sodium hydroxide solution.


What is the (H+) molarity after the addition of 15. 0 mL of KOH?

A 4 L sample of gas at 30 degrees celcius and 1 atm is changed to 0 degrees celcius and 800torr. 4.51 L is its new volume.

To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas.

[tex]P1V1/T1 = P2V2/T2[/tex]

where P1, V1, and T1 are the initial conditions, and P2, V2, and T2 are the final conditions.

Substituting the given values, we get:

[tex]\left(\frac{{1 , \text{atm} \cdot 4 , \text{L}}}{{303 , \text{K}}}\right) = \left(\frac{{0.8 , \text{atm} \cdot V2}}{{273 , \text{K}}}\right)[/tex]

Solving for V2, we get:

[tex]V2 = \frac{{1 , \text{atm} \cdot 4 , \text{L} \cdot 273 , \text{K}}}{{303 , \text{K} \cdot 0.8 , \text{atm}}} = 4.51 , \text{L}[/tex]

Therefore, the new volume of the gas is 4.51 L when the temperature is changed from 30 degrees Celsius to 0 degrees Celsius and the pressure is changed from 1 atm to 800 torr.

To know more about the sample of gas refer here :

https://brainly.com/question/13137455#

#SPJ11

There are 0.1474 moles of hydrogen atoms in 0.0737 mol of N2H4.

What is Mole?

In chemistry, a mole is a unit used to express the amount of a substance. One mole of a substance is defined as the amount of that substance that contains as many elementary entities (atoms, molecules, or other particles) as there are atoms in 12 grams of carbon-12.

To determine the mass of lead in PbCO3, we need to use the molar mass of PbCO3 and the stoichiometric relationship between Pb and PbCO3. The molar mass of PbCO3 is 267.21 g/mol, and the stoichiometric relationship between Pb and PbCO3 is 1:1.

Thus, the mass of Pb in 1.25x10^4 g of PbCO3 can be calculated as follows:

Mass of Pb = (1.25x10^4 g PbCO3) x (1 mol PbCO3/267.21 g PbCO3) x (1 mol Pb/1 mol PbCO3) x (207.2 g Pb/mol Pb)

= 1.02x10^4 g Pb

Therefore, 1.02x10^4 g of Pb is contained in 1.25x10^4 g of PbCO3.

The formula for N2H4 indicates that there are two hydrogen atoms for every molecule of N2H4. Therefore, we can calculate the number of moles of hydrogen atoms in 0.0737 mol of N2H4 as follows:

Number of moles of H atoms = (0.0737 mol N2H4) x (2 mol H atoms/1 mol N2H4)

= 0.1474 mol H

Learn more about Mole, visit;

https://brainly.com/question/15356425

#SPJ4

If an area has a very cold climate, it is most likely that the area experiences low temperatures throughout the year.

Cold climate regions are often characterized by sub-zero temperatures and limited precipitation, which can lead to dry and barren landscapes. These regions are typically found in the polar regions of the world, such as the Arctic and Antarctic, as well as in high-altitude mountain ranges.

The cold climate can have a significant impact on the environment, with many plants and animals adapted to survive in the harsh conditions. In cold climates, plants and animals often have adaptations that help them conserve heat and energy, such as thick fur coats, hibernation, or slow growth rates.

This means that the biodiversity in cold climate regions may be different than that found in more temperate regions.

Human communities that live in cold climate regions have also adapted to the extreme conditions, often relying on traditional techniques to survive. For example, the Inuit people of the Arctic have developed an intricate knowledge of the land and sea to hunt, fish, and gather food. They have also developed specialized tools and clothing to withstand the cold temperatures.

Overall, a cold climate can have a significant impact on the environment and the communities that rely on it. Understanding the unique challenges and adaptations of these regions is crucial for effective conservation and management.

To know more about cold climate, visit:

https://brainly.com/question/11673115#

#SPJ11

I agree with the student's claim that a 4-gram paintball fired from a paintball gun at 90 m/s could have about the same kinetic energy as a 1-gram bb pellet fired from a bb gun at 180 m/s.

To answer this question, we need to compare the kinetic energy of the paintball and the bb pellet. The formula for kinetic energy is 1/2mv^2, where m is the mass of the object and v is its velocity.

For the paintball, with a mass of 4 grams and a velocity of 90 m/s, the kinetic energy is:

1/2 * 0.004 kg * (90 m/s)^2 = 18.18 joules

For the bb pellet, with a mass of 1 gram and a velocity of 180 m/s, the kinetic energy is:

1/2 * 0.001 kg * (180 m/s)^2 = 16.2 joules

So, the student's claim is actually true - the 4-gram paintball fired at 90 m/s has slightly more kinetic energy than the 1-gram bb pellet fired at 180 m/s. However, it's worth noting that the two projectiles have different sizes and shapes, and would behave differently upon impact.

Learn more about kinetic energy at https://brainly.com/question/8101588

#SPJ11

To determine the molarity of the diluted solution, we need to use the equation:

M1V1 = M2V2

where M1 is the initial molarity of the solution, V1 is the initial volume of the solution, M2 is the final molarity of the solution, and V2 is the final volume of the solution.

In this case, the initial solution is a 0.75 M K2SO4 solution with a volume of 550 mL, and water is added to make a final volume of 450 mL. We can write:

M1 = 0.75 M

V1 = 550 mL

V2 = 450 mL

We can solve for M2:

M1V1 = M2V2

0.75 M × 550 mL = M2 × 450 mL

M2 = (0.75 M × 550 mL) / 450 mL

M2 = 0.92 M

Therefore, the molarity of the diluted solution is 0.92 M.

To know more about molarity refer here

https://brainly.com/question/31545539#

#SPJ11

We need 4.68 g of ammonium chloride (NH₄Cl) to prepare 0.250 L of a 0.35 M solution.

To determine the mass of ammonium chloride (NH₄Cl) required to prepare a 0.250 L (liters) of a 0.35 M (molar) solution, follow these steps:
1. Recall the formula for molarity: M = moles of solute / volume of solution in liters.
2. Rearrange the formula to solve for moles of solute: moles of solute = M x volume of solution in liters.
3. Calculate the moles of NH₄Cl needed: moles of NH₄Cl = 0.35 M x 0.250 L = 0.0875 moles.
4. Determine the molar mass of NH₄Cl by adding the molar masses of its constituent elements: (N = 14.01 g/mol, H = 1.01 g/mol, Cl = 35.45 g/mol): 14.01 + (4 x 1.01) + 35.45 = 53.49 g/mol.
5. Calculate the mass of NH₄Cl required: mass = moles x molar mass = 0.0875 moles x 53.49 g/mol = 4.680125 g.

So, you need 4.68 g of ammonium chloride (NH₄Cl) to prepare 0.250 L of a 0.35 M solution.

To know more about molarity :

https://brainly.com/question/13601876

#SPJ11

17.43 grams of NH₃ will produce 34.39 liters of water.

The balanced chemical equation is 4 NH₃ + 5O₂ → 4NO + 6H₂O. From the equation, we can see that for every 4 moles of NH₃ reacted, 6 moles of water are produced.

Therefore, to determine the number of moles of water produced, we need to convert the mass of NH₃ given to moles. The molar mass of NH₃ is 17.03 g/mol, so:

17.43 g NH₃ × (1 mol NH₃/17.03 g NH₃) = 1.023 mol NH₃

Using stoichiometry, we can calculate the number of moles of water produced:

1.023 mol NH₃ × (6 mol H₂O/4 mol NH₃) = 1.5345 mol H₂O

Finally, we can convert the number of moles of water to liters using the fact that 1 mole of any gas at standard temperature and pressure (STP) occupies 22.4 L:

1.5345 mol H₂O × (22.4 L/mol) = 34.39 L

To know more about chemical equation, refer here:

https://brainly.com/question/19626681#

#SPJ11

The molarity of the sugar solution is 0.5988 M (mol/L).

To calculate the molarity of a solution, we need to know the number of moles of solute (the substance being dissolved) and the volume of the solution in liters.

First, we need to determine the number of moles of sugar (C12H22O11) in the given mass of 102.6 grams:

The molar mass of C12H22O11 can be calculated as follows:

12(12.01 g/mol) + 22(1.01 g/mol) + 11(16.00 g/mol) = 342.3 g/mol

The number of moles of C12H22O11 in 102.6 grams can be calculated as:

102.6 g / 342.3 g/mol = 0.2994 mol

Next, we need to convert the volume of the solution from milliliters to liters:

mL = 0.5 L

Now we can calculate the molarity (M) of the solution:

M = moles of solute/liters of solution

M = 0.2994 mol / 0.5 L

M = 0.5988 M

Therefore, the molarity of the sugar solution is 0.5988 M (mol/L).

learn more about molarity here

https://brainly.com/question/14469428

#SPJ1

We need 1.26 liters of hydrogen gas to react with 9.0 g of bromine.

To solve this problem, we need to use the balanced chemical equation for the reaction between hydrogen gas (H₂) and bromine (Br₂):

[tex]H_2 + Br_2 - > 2HBr[/tex]

According to the stoichiometry of this equation, one mole of Br₂ reacts with one mole of H₂ to produce two moles of HBr. Therefore, we need to determine the number of moles of Br₂ in 9.0 g, and then use the mole ratio to find the number of moles of H₂ required.

Finally, we can convert the number of moles of H₂ to liters using the ideal gas law.

First, we need to calculate the number of moles of Br₂ in 9.0 g:

The molar mass of Br₂ is 2(79.90 g/mol) = 159.80 g/mol

The number of moles of Br₂ in 9.0 g is:

9.0 g / 159.80 g/mol = 0.0563 mol Br₂

Next, we use the mole ratio from the balanced equation to find the number of moles of H₂ required:

According to the balanced equation, one mole of Br₂ reacts with one mole of H₂, so we need 0.0563 moles of H₂.

Finally, we can use the ideal gas law to convert the number of moles of H₂ to liters:

The ideal gas law is PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

We can assume standard temperature and pressure (STP), which is 0°C (273.15 K) and 1 atm.

At STP, one mole of an ideal gas occupies 22.4 L.

Therefore, the volume of H2 required is:

V = (0.0563 mol) x (22.4 L/mol) = 1.26 L

Therefore, we need 1.26 liters of hydrogen gas to react with 9.0 g of bromine.

learn more about temperature here

https://brainly.com/question/26866637

#SPJ1

The molarity of the solution is 0.33 M.

To calculate the molarity, you need to divide the moles of solute by the volume of the solvent in liters. In this case, you have 2.0 moles of solute and 6.0 liters of solvent. Using the formula M = moles/volume, you can find the molarity of the solution:

M = (2.0 moles) / (6.0 L)
M = 0.33 M

This means that the concentration of the solute in the solution is 0.33 moles per liter. Molarity is an important concept in chemistry as it helps in determining the concentration of a particular substance in a solution and is useful in various calculations and reactions.

To know more about moles  click on below link:

https://brainly.com/question/26416088#

#SPJ11

The answer to the multistep calculation, expressed using the appropriate number of significant figures, is 24.3 feet.

In order to determine the appropriate number of significant figures in the answer, we need to follow the rules of significant figures for addition and subtraction.

When adding or subtracting numbers, the answer should be rounded to the same number of decimal places as the measurement with the least number of decimal places.

Here, the measurement with the least number of decimal places is 10.0 feet, which has one decimal place. Therefore, we should round the final answer to one decimal place as well.

Now, let's perform the calculation:

87.95 feet x 0.277 feet + 5.02 feet - 1.348 feet + 10.0 feet = 24.3108725 feet

Rounding to one decimal place, the final answer is:

24.3 feet

Therefore, the answer to the multistep calculation, expressed using the appropriate number of significant figures, is 24.3 feet.

To know more about significant figures  refer here:

https://brainly.com/question/29153641

#SPJ11

9. Using the combined gas law, the volume of the gas at STP can be calculated as 112.2 L. This equation takes into account the initial pressure, temperature, and volume, as well as the new pressure and temperature at STP.

10. Applying Boyle's law, the new volume of the air inside the submarine would be approximately 87,873.2 L. This is calculated by multiplying the initial volume and pressure, and dividing by the new pressure.

11. Using the combined gas law, the new volume of the balloon can be calculated as 0.98 L. This equation takes into account the initial temperature, volume, and pressure, as well as the new temperature.

12. Using Boyle's law, the new pressure of the gas can be calculated as 3.25 atm. This equation takes into account the initial pressure and volume, as well as the new volume.

13. Using Charles' law, the new volume of the person's lungs can be calculated as 3.8 L. This equation takes into account the initial lung capacity and temperature, as well as the new temperature.

It is highly unlikely that a person would actually explode from anger, as the body has mechanisms in place to regulate pressure and prevent such an event.

To know more about Charles' law click on below link:

https://brainly.com/question/16927784#

#SPJ11

Based on the balanced chemical equation provided, the combustion of 675 grams of oxygen gas (O₂) will produce 275.1 grams of water (H₂O) in the form of steam. Therefore, 275.1 grams of steam are produced when 675 grams of oxygen gas combust.

To determine how many grams of steam are produced when 675 grams of oxygen gas combust, we'll use the balanced equation you provided: 2C₈H₁₈ (l) + 25O₂ (g) --> 16CO₂ (g) + 18H₂O (g).

Step 1: Calculate the molar mass of O₂ and H₂O.
O₂: 16.00 g/mol * 2 = 32.00 g/mol
H₂O: (1.01 g/mol * 2) + 16.00 g/mol = 18.02 g/mol

Step 2: Calculate the moles of oxygen (O₂) in the 675 grams of oxygen gas.
moles of O₂ = 675 g / 32.00 g/mol = 21.09375 mol

Step 3: Use the stoichiometry from the balanced equation to find the moles of H₂O (steam) produced.
(18 mol H₂O / 25 mol O2) * 21.09375 mol O₂ = 15.271125 mol H2O

Step 4: Convert moles of H₂O to grams.
grams of H₂O = 15.271125 mol * 18.02 g/mol = 275.097895 g

So, approximately 275.1 grams of steam are produced when 675 grams of oxygen gas combust.

Learn more about combustion at https://brainly.com/question/23992512

#SPJ11

The balanced chemical equation for the reaction between sodium and sulfuric acid to form sodium sulfate and hydrogen gas is:

2Na + H2SO4 -> Na2SO4 + 2H2

From the given information, we can see that the reaction is limited by the amount of sodium available, since all of the sodium is used up in the reaction.

Therefore, we can use the amount of sodium to determine the amount of sulfuric acid that reacted and the amount of sodium sulfate that was formed.

1. Calculate the amount of sulfuric acid that reacted:

m(Sulfuric acid) = 25 g - 9 g = 16 g

n(Sulfuric acid) = m(Sulfuric acid) / M(Sulfuric acid) = 16 g / 98.08 g/mol = 0.163 mol

2. Calculate the amount of sodium sulfate formed:

Since the mole ratio of Na to Na2SO4 is 2:1, the number of moles of sodium used is:

n(Na) = m(Na) / M(Na) = 3 g / 22.99 g/mol = 0.1305 mol

The amount of sodium sulfate formed is also 0.1305 mol, since the mole ratio of Na to Na2SO4 is 2:1.

m(Na2SO4) = n(Na2SO4) x M(Na2SO4) = 0.1305 mol x 142.04 g/mol = 18.54 g

Therefore, 18.54 grams of sodium sulfate were formed in the reaction.

To know more about hydrogen  refer here

https://brainly.com/question/31018544#

#SPJ11

The concentration of ethylene glycol needed to raise the boiling point of water to 105°C is 9.8 mol/kg or 9.80 molal concentration.

To calculate the concentration of ethylene glycol needed to raise the boiling point of water to 105°C, we can use the following formula:

ΔTb = Kb x molality

Where ΔTb is the change in boiling point, Kb is the boiling point elevation constant for water (0.51°C/m), and molality is the number of moles of solute per kilogram of solvent.

First, we need to calculate the ΔTb, which is the difference between the boiling point of the solution (105°C) and the boiling point of pure water (100°C):

ΔTb = 105°C - 100°C = 5°C

Next, we can plug in the values and solve for the molality:

5°C = 0.51°C/m x molality

Therefore;

molality = 5°C / 0.51°C/m

             = 9.8 mol/kg

To know more about boiling point elevation, click below.

https://brainly.com/question/31074906

#SPJ11

The initial temperature of the water is 25.8 °C. As a result, the lead ball loses heat rapidly when it is placed in the water bath, causing the water temperature to increase significantly.

What is  Temperature?

Temperature is a measure of the average kinetic energy of the particles in a substance. It is a physical quantity that describes how hot or cold an object is. Temperature is usually measured using a thermometer and is commonly expressed in units such as degrees Celsius (°C), Fahrenheit (°F), or Kelvin (K).

The energy gained by the water can also be calculated using the formula:

Q = mcΔT

where Q is the energy gained (in joules), m is the mass of the water (in grams), c is the specific heat capacity of water (in J/g°C), and ΔT is the change in temperature of the water (in °C).

We can calculate Q as follows:

Q = (500.0 g)(4.184 J/g°C)(35°C - T)

where T is the initial temperature of the water.

Since the energy lost by the lead ball is equal to the energy gained by the water, we can set these two equations equal to each other and solve for T:

(20.0 g)(0.13 J/g°C)(705°C - T) = (500.0 g)(4.184 J/g°C)(35°C - T)

Simplifying and solving for T gives:

T = 25.8°C

Therefore, the initial temperature of the water is 25.8 °C.

To know more about Temperature, visit;

https://brainly.com/question/26866637

#SPJ4

The formula for calculating the amount of energy required to raise the temperature of a substance is:

q = m * c * ΔT

where q is the amount of energy, m is the mass of the substance, c is the specific heat, and ΔT is the change in temperature.

We can rearrange this formula to solve for the mass of the metal:

m = q / (c * ΔT)

Substituting the given values, we get:

m = 832 J / (0.466 J/g*C * (71oC - 65oC))

m = 832 J / (0.466 J/g*C * 6oC)

m = 832 J / 2.796 J/g

m = 297.1387678 g

Rounding to five significant figures, the mass of the metal sample is 297.14 g.

To know more about substance refer here

https://brainly.com/question/13320535#

#SPJ11

2. To convert miles per hour to meters per second, we need to divide by 2.237.

Thus, 35 miles per hour is equal to (35/2.237) meters per second.

Simplifying, we get:

= 15.646 m/s

3. To convert feet to centimeters, we need to multiply by 30.48.

Thus, 379.7 feet is equal to (379.7 x 30.48) centimeters.

Simplifying, we get:

= 1158.754 centimeters

4. To calculate the number of atoms in 2.35 moles of sulfur, we need to use Avogadro's number, which is 6.022 x 10^23 atoms per mole.

Therefore, the number of atoms in 2.35 moles of sulfur is:

2.35 moles x 6.022 x 10^23 atoms/mole = 1.41 x 10^24 atoms

5. To calculate the number of molecules in 3.45 moles of sucrose, we need to use Avogadro's number, which is 6.022 x 10^23 molecules per mole.

Therefore, the number of molecules in 3.45 moles of sucrose is:

3.45 moles x 6.022 x 10^23 molecules/mole = 2.08 x 10^24 molecules

to know more about Avogadro's number refer here:

https://brainly.com/question/28812626#

#SPJ11

Answer: 3. It appears as though nothing is happening, but there is constant change occurring.

Explanation:

equilibrium is the state when the changes cancel each other, and the net change is 0.

think of it like a stalemate in tug of war; both people are pulling, but you wont see anything change, because their forces are equal and in opposite direction :)

The evaporation of water and dissolution of CO2 can affect the results of the experiment in several ways:

Concentration changes: As water evaporates, the concentration of the solute in the remaining solution increases. This can affect the rate of reaction, as the concentration of the reactants is a key factor in determining the rate. Similarly, as CO2 dissolves in the water, the concentration of dissolved CO2 increases, which can affect the pH of the solution.

Mass changes: As water evaporates, the mass of the solution decreases. This can affect the accuracy of the results, as the mass is often used to calculate the amount of product formed.

Temperature changes: Evaporation is an endothermic process, meaning that it requires energy in the form of heat. As a result, the temperature of the solution may decrease during the reaction, which can affect the rate of the reaction.

Overall, the effects of water evaporation and CO2 dissolution will depend on the specific conditions of the experiment, including the starting concentrations of the reactants and the rate of evaporation. In general, these factors can affect the accuracy and precision of the results, and must be carefully controlled or accounted for in order to obtain reliable data.

To know more about evaporation refer to-

https://brainly.com/question/5019199

#SPJ11

Answer:

yes

Explanation:

yes, avalanches a big part in the shaping of the earths surface.

Yes, avalanches can play a significant role in shaping the Earth's surface, particularly in mountainous areas.

The movements of snow, ice, and debris down a slope known as avalanches can significantly impact the Earth's surface, especially in mountainous regions. These natural occurrences can cause various landscape changes, erosion, and deposition.

The standard potential of the galvanic cell where X is the anode and Y is the cathode is 1.99 V.

The standard potential of a galvanic cell can be calculated by subtracting the reduction potential of the anode (X) from the reduction potential of the cathode (Y).

E°cell = E°cathode - E°anode

In this case, Y has a higher reduction potential than X, so Y will be the cathode and X will be the anode.

E°cell = E°Y - E°X

E°cell = (-0.44 V) - (-2.43 V)

E°cell = 1.99 V

To know more about the standard potential of the galvanic cell, click below.

https://brainly.com/question/28167837

#SPJ11

The student's task is to determine the density of the four mystery liquids using the mass and volume measurements.

Density is a physical property that describes the amount of mass per unit volume.

The formula for density is density = mass/volume. Once the density of each liquid is determined, the student can compare it to known densities of different substances to identify the liquid.

This information can be useful in various fields such as chemistry, pharmacology, and environmental science.

The student may also use this data to calculate other properties of the liquids such as viscosity, surface tension, and boiling point. Overall, measuring mass and volume is a fundamental method in scientific research and analysis.

To know more about mystery liquids refer here: https://brainly.com/question/22053907#

#SPJ11

To draw (R)-3-aminobutan-1-ol using wedge-dash notation, follow these steps: 1. Draw a four-carbon chain representing butan-1-ol. 2. Add an -OH group to the first carbon. 3. Add an -NH2 group to the third carbon.

To draw (R)-3-aminobutan-1-ol using wedge-dash notation to designate stereochemistry, we first need to determine the absolute configuration of the molecule. The priority of the substituents attached to the chiral center (the carbon with four different groups attached) must be determined according to the Cahn-Ingold-Prelog (CIP) rules. The highest priority group is given a number 1, the second-highest priority group is given a number 2, and so on. For (R)-3-aminobutan-1-ol, the substituents attached to the chiral center are: - NH2 (amino group) - highest priority - OH (hydroxy group) - second-highest priority - CH3 (methyl group) - third-highest priority - H (hydrogen) - lowest priority To determine the absolute configuration, we need to look at the orientation of the substituents in three-dimensional space. If the lowest priority group is pointing away from us (into the page), we use the right-hand rule to determine the orientation of the remaining three groups. If the sequence of priorities goes clockwise, the configuration is (R); if it goes counterclockwise, the configuration is (S). In the case of (R)-3-aminobutan-1-ol, we can assign the following orientations: - NH2 (highest priority) - wedge - OH - dash - CH3 - wedge - H (lowest priority) - into the page Based on this, we can see that the sequence of priorities goes clockwise, indicating that the configuration is (R). Therefore, the wedge-dash notation for (R)-3-aminobutan-1-ol is: H NH2 | | C---C | | CH3 OH The NH2 and CH3 groups are represented by wedges, indicating that they are coming out of the page towards the viewer. The OH group is represented by a dash, indicating that it is going into the page away from the viewer. The H group is represented by a thin line, indicating that it is behind the plane of the paper.

Visit to know more about wedge dadhdash notation:-

https://brainly.com/question/30478936

#SPJ11

Answer:

4.08 L

Explanation:

At standard temperature and pressure, a mole of any gas equals 22.4 L.

We have 0.182 mol of CO₂ gas. We know that every mole of gas is 22.4 L, so

[tex]0.182mol*\frac{22.4L}{1mol} =4.08L[/tex]

⇒ 4.08 L of CO₂ is the answer

SI Unit: Volume = 4.133 L of carbon dioxide

Non-SI Unit: Volume = 4.079 L carbon dioxide

At STP conditions (Standard Temperature and Pressure), which is conditions at 100 kPa and at 0°C or 273.15 K, it is a given that the volume of  1 mole of ideal gas is 22.71 L.

[tex]\large \textsf{$\therefore$ if 1 mol of CO$_2$ = 22.71 L}\\\\\large \textsf{hence, 0.182 $\times$ 1 mol of CO$_2$ = 22.71 $\times$ 0.182}\\\\\large \textsf{$\implies$ \boxed{\boxed{$volume = 4.133 L of CO$_2}}}[/tex]

Note: The value used for pressure above, 100 kPa (kilopascals), is a standard SI unit (International System of Units), used by most countries around the world.

However, another commonly used value for pressure (though not the preferred SI unit), is 1 atm (atmospheric pressure), which is equivalent to 101.325 kPa.

Using this value, the volume of 1 mole of ideal gas at STP is then 22.41 L. Solving this:

[tex]\large \textsf{if 1 mol of CO$_2$ = 22.41 L}\\\\\large \textsf{$\therefore$ 0.182 $\times$ 1 mol of CO$_2$ = 22.41 $\times$ 0.182}\\\\\large \textsf{$\implies$ \boxed{\boxed{$volume = 4.079 L CO$_2}}}[/tex]

To learn more about Standard Temperature and Pressure Conditions:

https://brainly.com/question/2783971

Ammonium nitrates can be recovered by evaporating the water added explains that ammonium nitrates dissolved in water and process is endothermic. Thus, option A is correct.

When ammonium is added to water, the temperature of the water decreases. This is because the dissolution of ammonium in water is an endothermic process, meaning it requires energy in the form of heat to take place. When ammonium dissolves in water, it absorbs heat from the surroundings, which causes the temperature of the water to decrease.

Furthermore, ammonium nitrates can be recovered by evaporating the water that was added. This indicates that the ammonium nitrates dissolved in water and the process is endothermic. If the ammonium nitrate had reacted with the water, it would not be possible to recover it by evaporation.

Therefore, option A, "the ammonium nitrates dissolved in water and process is endothermic," is the correct explanation for the observations that when ammonium is added to water, the temperature decreases, and ammonium nitrates can be recovered by evaporating the water added.

To know more about Ammonium nitrates, visit:

https://brainly.com/question/5148461#

#SPJ11

The molar mass of the unknown gas is approximately 221.6 g/mol.

To find the molar mass of the unknown gas, we can use the ideal gas law equation:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

First, we need to convert the given values to their appropriate units:

mass (m) = 205 g

volume (V) = 20.0 L

pressure (P) = 1.00 atm

temperature (T) = 273 K

Next, we can rearrange the ideal gas law equation to solve for the number of moles:

n = PV / RT

Substituting the given values, we get:

n = (1.00 atm) x (20.0 L) / [(0.08206 L atm/mol K) x (273 K)]

n = 0.926 mol

Now we can calculate the molar mass of the unknown gas by dividing its mass by the number of moles:

molar mass = mass / n

molar mass = 205 g / 0.926 mol

molar mass = 221.6 g/mol

To know more about molar mass refer to-

https://brainly.com/question/22997914

#SPJ11

In general, a system tends to favor a reaction that results in an increase in entropy, which is a measure of the number of possible arrangements of the system's particles. The answer is A) lower energy and higher entropy.

This is due to the fact that the increase in the number of particles in the system or the increase in the number of ways the particles can be arranged leads to an increase in entropy. On the other hand, a system also tends to favor a reaction that results in a decrease in energy, which is a measure of the system's ability to do work.

Therefore, when a system undergoes a reaction that decreases its energy while increasing its entropy, it is moving towards a more stable and disordered state.

This is because a lower energy state means that the system is releasing energy, while a higher entropy state means that the system is becoming more disordered and spread out. This tendency towards lower energy and higher entropy is known as the second law of thermodynamics, which governs the behavior of all physical systems.

The answer is A) lower energy and higher entropy.

To know more about entropy refer to-

https://brainly.com/question/13135498

#SPJ11

The substrates that will react are CH₃CH₂CH₂Br and CH₃CH₂CH₂CH₂Br  and (CH₃)₃CNH₂ and CH₃CH₂OH will not react with naome in an sn2 reaction to form an appreciable amount of product.

Based on the Sn2 reaction mechanism, substrates with good leaving groups and low steric hindrance are more likely to react with nucleophiles like NaOMe.

Therefore, the substrates CH₃CH₂Br, (CH₃)₂CHBr, CH₃CH₂I, and (CH₃)₃CBr are expected to react with NaOMe to form appreciable amounts of product. On the other hand, substrates with poor leaving groups or high steric hindrance are less likely to undergo Sn2 reactions.

Therefore, the substrates (CH₃)₃CNH₂ and CH₃CH₂OH are not expected to react with NaOMe to form appreciable amounts of product. Finally, CH₃CH₂CH₂Br and CH₃CH₂CH₂CH₂Br may react with NaOMe, but to a lesser extent due to their higher steric hindrance.

To know more about the Sn2 reaction mechanism refer here :

https://brainly.com/question/31472916#

#SPJ11

Complete question :

Determine which of the substrates will and will not react with NaOMe in an Sy2 reaction to form an appreciable amount of product. Substrate will react Substrate will NOT react Answer Bank CH,CH.CH,BE (CH),CBE (CH), CHRE CH, CH,CH,NH, (CH),CCH,BE CH,CH.CH, OH

We need to dissolve 6.85 grams of sucrose in 2000 grams of water to make a 0.1 M solution.

To calculate the mass of sucrose needed to make a 0.1 molar solution in 2000 grams of water, we need to use the formula:

[tex]m = n *M * MW[/tex]

Step 1: Calculate the number of moles of sucrose needed

Molarity (M) = 0.1 mol/L

volume of solution = 2000 grams of water ÷ density of water = 2000 mL

We need to calculate the number of moles of sucrose that would be present in 2000 mL of a 0.1 M solution:

moles of solute (n) = [tex]M * V = 0.1 mol/L *2.0 L = 0.2 moles[/tex]

Step 2: Calculate the mass of sucrose needed

Molecular weight of sucrose is 342.3 g/mol.

We can use the formula:

[tex]m = n * M * MW \\m = 0.2 moles *0.1 mol/L * 342.3 g/mol = 6.85 g[/tex]

To know more about Molecular weight, here

brainly.com/question/18948587

#SPJ4