Answer:
Semiarid deserts.
Regions that receive up to 20 inches of rainfall per year are referred to as semiarid deserts because they receive more precipitation than most deserts.
Semiarid deserts are characterized by their dry climate, with average annual temperatures ranging from hot to cold. The vegetation in semiarid deserts is typically sparse, with shrubs and cacti being the dominant plants. These regions are found in areas where the climate is transitional between arid and humid regions, such as the Great Basin in the United States and the Kalahari Desert in Africa.
While semiarid deserts receive more rainfall than arid deserts, they are still prone to droughts and water scarcity. This can be a significant challenge for agriculture and human settlements in these regions. However, semiarid deserts also have unique ecosystems and biodiversity, with many plant and animal species adapted to the harsh conditions. Overall, semiarid deserts play an important role in the global ecosystem and are worthy of study and conservation efforts.
Learn more about Semiarid deserts here: https://brainly.com/question/23082693
#SPJ11
How might the processes of weathering and erosion affect the location you pick for your fossil dig?
Answer:
Weathering and erosion from wind, rain, ice, heat, and rivers break rocks apart and wash the fragments away.
Please help ASAP
Earth’s surface is made up of a system of moving plates. The heavy black lines on the map mark the plate boundaries. The map also shows the approximate age of different parts of the ocean floor in millions of years (m.y.). Which statement is best supported by the data in the map?
The map of the Earth's surface shows that C. The parts of the ocean floor that are closer to a plate boundary tend to be younger than other parts of the ocean floor.
Why is this so ?The ocean floor is constantly being created and destroyed due to the movement of tectonic plates. At mid-ocean ridges, new oceanic crust is formed through volcanic activity and spreads outwards, away from the ridge.
As the crust moves away from the ridge, it cools and becomes denser, eventually sinking back into the mantle at subduction zones. As a result, the oceanic crust closest to a plate boundary is generally younger than the crust farther away from the boundary.
Find out more on oceanic plates at https://brainly.com/question/29994956
#SPJ1
If the diameter of Earth is approximately 8000 miles, approximate the distance between A and B if angle ACB has the indicated measure. (Round your answers to the nearest mile.) A) 49 degrees B) 4 degrees
When angle ACB is 49 degrees, the approximate distance between A and B is 3420 miles. when angle ACB is 4 degrees, the approximate distance between A and B is 280 miles.
A) For angle ACB = 49 degrees:
Step 1: Convert the diameter of Earth (8000 miles) to its radius, since we'll be working with a circular geometry. The radius of Earth is half the diameter, so it's 4000 miles.
Step 2: Use the formula for finding the arc length (distance between A and B) on a circle, which is:
Arc length = Radius x Angle (in radians)
Step 3: Convert angle ACB from degrees to radians:
Radians = Degrees x (π/180)
Radians = 49 * (π/180) ≈ 0.855 radians
Step 4: Calculate the arc length (distance between A and B):
Arc length = 4000 miles x 0.855 radians ≈ 3420 miles
So, when angle ACB is 49 degrees, the approximate distance between A and B is 3420 miles.
B) For angle ACB = 4 degrees:
Step 1: We already know the radius of Earth is 4000 miles.
Step 2: Convert angle ACB from degrees to radians:
Radians = 4 x (π/180) ≈ 0.070 radians
Step 3: Calculate the arc length (distance between A and B):
Arc length = 4000 miles x 0.070 radians ≈ 280 miles
So, when the angle ACB is 4 degrees, the approximate distance between A and B is 280 miles.
Learn more about distance here:-
https://brainly.com/question/15172156
#SPJ11
Which is an acceptable means of backfire flame control
The acceptable means of Backfire flame control is approved flame, engine air, and location of the engine air system.
Devices used to control backfire flames must be USCG-approved, in excellent working order, and conform to SAE J-1928 or UL 1111 requirements.
The acceptable means of backfire flame control are as follows:
An authorized flame arrestor that is frame tightly connected to the air intake. A permitted fuel and air induction system for an engine. A connection to the engine or area of the engine air injection system whereby a flame brought on by an engine burnout will be spread outside the vessel safely. All fasteners must be made of metal, have flame-tight connections, and be anchored to withstand shock, vibration, and engine backfiring.Read more about Flame arrestor:
https://brainly.com/question/4370435
Controlling backfire flames in engines can be achieved through the use of antilag systems or fuel injection strategies. These means help to maintain consistent pressure levels and modify the fuel-air mixture within the combustion chamber, thereby reducing the chance of backfire.
Explanation:An acceptable means of backfire flame control in engineering, specifically in the context of internal combustion engines, includes the use of antilag systems or fuel injection strategies.
An antilag system works by maintaining the turbocharger's RPM when the throttle is closed, preventing sudden high-pressure situations that can lead to backfire. Meanwhile, altering the timing of fuel injection or the fuel-air mixture can influence the conditions within the combustion chamber, reducing the likelihood of a backfire occurring. However, these measures should be implemented with care, as they can have other impacts on engine performance and longevity.
Learn more about backfire flame control here:https://brainly.com/question/31907050
what are three countries of the tropic of cancer crosses
Answer: There is Algeria, Niger, Libya, Egypt, Saudi Arabia, United Arab Emirates, Oman, India, Bangladesh, Myanmar, China, Taiwan, Mexico, Bahamas, Mauritania and Mali
Explanation:
A formal culture region differs from other regions in that it…
A) has a focal point or node
B) is one that people believe exists
C) has a selected feature or internal uniformity
D) does not contain gradations such as core, domain, and sphere
E) applies only to linguistic and religion regions I NEED THIS NOW PLEASE ANSWER ILL MAKE BRAINLIEST AND 23 POINTS
Answer: A) has a focal point or node
A formal culture region is a geographical area inhabited by people who have one or more cultural traits in common, such as:
language,religion,or ethnicity.The defining characteristic of a formal culture region is that it has a focal point or node, which is the area of greatest concentration of a particular cultural trait or set of traits. This focal point serves as the core of the culture region and radiates outwards, with the intensity of the cultural traits diminishing as one moves away from the core.
Hope that helps! Good luck! <3
Describe how each of the following impacts our environment: rainforest, population growth, and use of natural resources. (worth 12 total)
The eco-system of the planet depends hea-vily on the health of the world's rain-forests. The environ-ment is significantly impacted by the grow-ing human population, including habit-at loss, pollution, de-forestation, & resource depletion.
Using natural resources like mine-rals, fossil fuels, and wood has a big impact on the eco-system. They ser-ve as a carbon sink, re-moving a significant am-ount of carbon di-oxide from the atmo-sphere while generating oxygen, a neces-sary compo-nent of life. Millions of species of plants & animals, many of wh-ich are unique to the earth, can be fou-nd in rain-forests.
Natural resource exploit-ation and process-ing may lead to soil ero-sion, water & air pollution, & habitat de-gradation. The burn-ing of fossil fuels, in part-icular, emits significant vol-umes of carbon di-oxide into the atmo-sphere, leading to cli-mate change.
The environ-ment is significantly impact-ed by the grow-ing human population, including habit-at loss, pollution, deforest-ation, & resource depletion.
To know more about rainforest and population click below:
brainly.com/question/20882028
#SPJ4
geological evidence based on several radiometric techniques has provided a scientifically well-accepted age for the earth. represent that age of the earth as the 100-yard length of a football field, and any time interval can be represented as some distance on the field. (so something that lasted one-tenth of the age of the earth would be ten yards, and something that lasted one-half of the age of the earth would be fifty yards.) on this scale, how far on the football field would represent the time between the first appearance of abundant shelly creatures and today?
A little more than 1 yard on a football pitch would symbolise the period starting when the demise of the dinosaurs allowed room for the emergence of big mammals and ending today on this size. Option 1 is Correct.
An age for the Earth has been established through geological evidence based on several radiometric techniques. Every duration of time may be represented on a football pitch by a distance equal to the length of the Earth's age, which is 100 yards.
So, if something lasted a tenth of the age of the Earth, it would be 10 yards long, and if it lasted a half of the Earth's age, it would be fifty yards. Option 1 is Correct.
So, on this scale, 66 million year ≡ (66/4543) × 100 yard length
≡ 1.453-yard length
Learn more about Geological Visit: brainly.com/question/8741782
#SPJ4
Correct Question:
Geological evidence based on several radiometric techniques has provided a scientifically well-accepted age for the Earth. Represent that age of the Earth as the 100-yard length of a football field, and any time interval can be represented as some distance on the field. (So something that lasted one-tenth of the age of the Earth would be ten yards, and something that lasted one-half of the age of the Earth would be fifty yards.) On this scale, the time from when dinosaur extinction made space for large mammals, until today, would be represented by how far on the football field?
a. A little over 1 yard.
b. Over 90 yards.
c. 60 yards.
d. Over 80 yards.
e. 50 yards.
Helpp I need to figure it somthing
Brief Discussion on
Rainfall
Step4: Methods of data collection OS 157 to elegrinya ber eievisn Learners should give a short explanation of the data collected (in the past tense). Primary data: first-hand information e.g. Observations 9
There are various forms of data accumulation, containing primary dossier group methods such as remarks.
What are the types of observations?Observations include gathering the earliest news by being vigilant and recording the action or traits of people, mammals, or objects in their instinctive surroundings or controlled backgrounds.
Researchers concede the possibility use structured or unorganized remarks, contingent upon the research question, and may take outlines, use checklists or grade scales, or record television or audio dossier.
Observations can supply a rich and detailed dossier on management, interplays, and environmental determinants that grant permission not be captured through additional means, making the ruling class a valuable tool in many fields, containing therapy, anthropology, and instruction.
Read more about data collection here:
https://brainly.com/question/26711803
#SPJ1
TOPIC: Sphere of Influence (about countries colonizing other countries)
need talkshow script please
The talk show script with regard to the above topic is given below.
How would a sample talk show script for the above topic look like?Host: Good evening everyone, and welcome to tonight's talk show. Our topic for today is the concept of Sphere of Influence, where powerful countries colonize and exert control over other countries. To start off, I would like to ask our guests for their thoughts on this topic.
Guest 1: Well, I believe that Sphere of Influence has been a reality for centuries, where powerful countries try to dominate weaker ones for their own economic and political gain. It is not only unethical but also detrimental to the progress and development of the colonized countries.
Guest 2: I agree with that, but it's important to note that not all colonization has been bad. Some countries were able to benefit from the introduction of new technologies and systems of governance.
Host: That's a valid point. However, we cannot ignore the fact that colonization often comes at the cost of the loss of cultural identity and suppression of local traditions.
Guest 3: I think it's important to recognize that the effects of colonization are still felt today, even in countries that have gained their independence. The long-lasting impacts of Sphere of Influence are a reminder that we need to work towards a more equitable global system where countries are not subjugated for the benefit of others.
Host: Absolutely. Thank you to all our guests for sharing their thoughts on this important topic. Let's continue the conversation and work towards a more just and equal world.
Learn more about Talk Shows:
https://brainly.com/question/15798855
#SPJ1
The population of Ghana was 5,000,000 in 1957. The population in 1998 estimated to be 17, 000,000. Find the percentage increase in the population
The population of Ghana increased by 120% from 1957 to 1998.
To find the percentage increase in the population, we need to calculate the difference in population between the two years and then divide it by the population in 1957 and multiply by 100.
First, we can calculate the difference in population:
Population in 1998 - Population in 1957 = 12,000,000
Next, we can calculate the percentage increase:
(Population in 1998 - Population in 1957) / Population in 1957 x 100
= (12,000,000 - 5,000,000) / 5,000,000 x 100
= 6,000,000 / 5,000,000 x 100
= 120%
Learn more about The population
https://brainly.com/question/27991860
#SPJ4
Where is the greatest concentration of aerosols originating from and how would you
characterize that particular environment based on the maps?
According to the map, we can infer that the areas where the aerosol has the highest concentration and is thickest are in Central Africa and the Middle East.
What do we see on the map?On the map we see the different aerosol concentrations in the Earth's atmosphere. In this case, the yellow areas are those with the highest concentration of thick aerosol. On the other hand, the red areas have high concentrations of fine aerosol and the brown areas have lower aerosol concentrations.
According to the information on the map, we can infer that the areas in which the aerosol has the highest concentration and is thickest are in Central Africa and the Middle East because they have a greater number of red and yellow areas.
Learn more about aerosol in: https://brainly.com/question/29418985
#SPJ1
The Ottoman Empire was built
using a combination of
military conquests and
Ovast trade networks
O political alliances
O canons
O political conflicts
Military conquests and trade networks were the main components of the Ottoman Empire's growth and stability.
What is trade networks?Trade networks are global or regional networks of producers, consumers, and brokers who exchange goods and services. These networks can involve multiple countries, cultures, and languages and often span vast distances. Trade networks are responsible for the flow of goods, services, and capital across the world. They can involve a variety of actors, including governments, businesses, and individuals, who are connected by channels of communication, transportation, and finance. Trade networks are essential for the development of global markets and the growth of economies.
Political alliances, canons, and political conflicts were also important in the expansion of the Ottoman Empire, but not to the same extent as the military conquests and trade networks.
To learn more about trade networks
https://brainly.com/question/9676793
#SPJ9
How can activities droughts be triggered by Human
Answer:
Human activity can directly trigger exacerbating factors such as over farming, excessive irrigation, deforestation, and erosion adversely impact the ability of the land to capture and hold water
Read It! In 1843, copper was discovered in Tennessee and mining in the area began. This area, called Copper Basin, contained three large veins of copper. The technology used then was so environmentally harmful that Copper Basin has since been called the greatest human-made ecological disaster of all time. The minerals in Copper Basin were extracted with dynamite, which was uncontrollable and caused many cave-ins. Wood was burned to smelt the ore, which stripped nearly 50 square miles (130 square kilometers) of timber. Processing the copper created sulfur dioxide gas, which created acid rain, and the acid rain killed much of the remaining trees. Rainwater washed the loose silt away, leaving the soil useless. Do It! The mining was A destructive profitable C informative erratic
The mining in Copper Basin was undeniably destructive. The use of dynamite caused many cave-ins, resulting in the destruction of the landscape.
Moreover, the process of smelting the copper ore caused extensive deforestation, leading to the loss of habitat for many species. Processing the copper generated sulfur dioxide gas, which created acid rain, killing much of the remaining trees.
Rainwater washed away the loose silt, leaving the soil useless. Thus, the mining activities were harmful to the environment, the flora and fauna, and the local communities.
However, it cannot be denied that the mining activities in Copper Basin were profitable. The discovery of copper led to the establishment of mines and a booming industry that provided employment opportunities for the locals.
Moreover, the extraction of copper contributed significantly to the growth of the economy, and the profits generated from the sale of copper ore were substantial.
Therefore, while the mining activities in Copper Basin were undeniably destructive, they were also profitable, providing employment opportunities and contributing to the growth of the economy.
Nonetheless, the environmental impact of such activities cannot be overlooked, and efforts must be made to ensure that the exploitation of natural resources is sustainable and does not harm the environment.
For more such questions on Copper Basin visit:
https://brainly.com/question/1527894
#SPJ11
what is the best hypothesis on earthquakes and volcanoes.... the most dreaded natural disasters?
Answer:
We can deduce that volcanoes and earthquakes are caused by tectonic plate movements, they both pose a significant danger to humans
I really need help on this part ASAP!!
The diagram that answers the question is in the attachment
What are rock types?There are three main types of rocks: igneous, sedimentary, and metamorphic.
Igneous rocks are formed from cooled and solidified lava or magma. They can be further classified into two subcategories based on their texture: intrusive and extrusive. Intrusive igneous rocks cool slowly beneath the Earth's surface, resulting in a coarse-grained texture, while extrusive igneous rocks cool quickly on the surface, resulting in a fine-grained texture.
Sedimentary rocks are formed by the accumulation and consolidation of mineral and organic particles, such as sand, silt, and shells, which are deposited in layers. These layers eventually become compacted and cemented together, forming sedimentary rocks. Sedimentary rocks can be further classified into three subcategories: clastic, chemical, and organic.
Metamorphic rocks are formed when existing rocks are subjected to high heat, pressure, or chemically active fluids, causing them to change their composition, texture, or structure. Metamorphic rocks can be further classified into two subcategories: foliated and non-foliated, based on their texture. Foliated metamorphic rocks have a banded or layered appearance due to the alignment of minerals, while non-foliated metamorphic rocks do not have any visible banding.
Read more on rock types here:https://brainly.com/question/26046551
#SPJ1
Industrial technology development has made almost everything possible. However, there are still limitations in changing the natural features to human features. What do you think are the reasons?
Overall, while industrial technology has enabled humans to achieve many things, there are still limitations in transforming natural features into human features due to the complexity of these features, the environmental impacts of such transformations, ethical concerns, and technological limitations.
While industrial technology has made significant advancements, there are still limitations in changing natural features to human features due to several reasons:
Complexity of Natural Features: Natural features, such as mountains, rivers, and forests, are complex and have evolved over millions of years through natural processes. These features are influenced by a range of factors, including geology, climate, and ecology, and cannot be easily replicated or transformed into human features.
Environmental Impact: Transforming natural features into human features often has significant environmental impacts, such as habitat loss, soil erosion, and water pollution. Such impacts can have long-term consequences for the health and sustainability of ecosystems and the species that depend on them.
To know more about industrial technology here
https://brainly.com/question/22785524
#SPJ4
The average American uses about 1 bath tub full of water each day (13. 37 cubic feet (ft3)). How many ft?
of an aquifer with a porosity of 25% would be drained each day to provide this water? Show your work by
using the formula on the other side and solving for "x".
PLEASEEEEEE HELPPPPP!!!!!!
To determine how many cubic feet of an aquifer with a porosity of 25% would be drained each day to provide 13.37 ft³ of water for the average American, you can follow these steps:
1. Determine the volume of water needed: 13.37 ft³ (given in the question)
2. Calculate the volume of the aquifer needed, considering the porosity: Divide the volume of water needed by the porosity (25% or 0.25) to find the total volume of the aquifer that needs to be drained.
The total volume of aquifer = volume of water needed / porosity
Total volume of aquifer = 13.37 ft³ / 0.25
Total volume of aquifer = 53.48 ft³
So, 53.48 cubic feet of an aquifer with a porosity of 25% would be drained each day to provide 13.37 ft³ of water for the average American.
Know more about aquifers:
https://brainly.com/question/15921008
#SPJ11
53.48 cubic feet of an aquifer with a porosity of 25% would be drained each day to provide water to the average American using about 1 bathtub full of water each day (13. 37 cubic feet (ft3)).
To answer this question, we need to use the formula:
The volume of water used = Volume of aquifer drained x porosity
We know that the volume of water used each day is 13.37 cubic feet. We can plug this into the formula and solve for the volume of aquifer drained:
13.37 = x * 0.25
x = 13.37 / 0.25
x = 53.48 cubic feet
Therefore, about 53.48 cubic feet of an aquifer with a porosity of 25% would be drained each day to provide the average American with 1 bathtub full of water.
It's important to note that this is an average and individual water usage may vary. It's also important to practice water conservation to help preserve our natural resources.
Learn more about aquifers here:
brainly.com/question/15921008
#SPJ11
Please help me with this special right triangles maze...
In a special right triangle, the angles and side ratios have distinct relationships, making it easier to solve for unknown sides.
There are two main types of special right triangles:
1. 45-45-90 triangles: In this isosceles right triangle, both base angles measure 45 degrees, and the hypotenuse is √2 times the length of each leg. If one leg is "a," then the other leg is also "a," and the hypotenuse is a√2.
2. 30-60-90 triangles: In this triangle, the side ratios are 1:√3:2. The shortest side (opposite the 30-degree angle) is half the length of the hypotenuse, and the middle side (opposite the 60-degree angle) is √3 times the shortest side. If the shortest side is "a," then the middle side is a√3, and the hypotenuse is 2a.
When solving a special right triangle maze, identify which type of triangle you're working with and apply the appropriate side ratios.
To know more about special right triangle visit:
https://brainly.com/question/12046883
#SPJ11
In which atmosphere layer does 80 percent of the gas in the atmosphere
reside?
Answer: la réponse est: la troposphère
Explanation:
Answer: The troposphere
Explain the relationship between the terms in each of these pairs.
a, price floor
minimum wage
b. rationing black market
Answer:
Explanation:
a. A price floor is a government-imposed minimum price that is set above the equilibrium price of a good or service in a market. The minimum wage is an example of a price floor, as it sets a minimum wage rate that employers must pay to their workers. Therefore, the minimum wage is a specific type of price floor.
b. Rationing is a system of allocating scarce resources, such as food or fuel, based on a set of criteria or rules. In times of shortage, a black market may emerge, which is an illegal market in which goods or services are bought and sold at prices that are higher than the legally established price. Rationing and black markets are related because they both arise as a response to scarcity, but they represent two different ways of allocating resources. Rationing is a legal and controlled method of allocating scarce resources, while black markets are illegal and uncontrolled.
PLS MARK ME BRAINLIEST
How do differences in elevation create vertical climate zones in Latin America? Describe the characteristics of such climate zones.
There are vertical climate zones that are determined by elevation above sea level. As you rise higher in the atmosphere, the air becomes colder and contains less oxygen. Persistence and humidity are impacted by this.
Elevation above the earth's surface causes a place's temperature to decrease. Since the direct source of atmospheric heat is the earth's surface, the temperature drops as we go higher into the atmosphere. High altitudes often have significantly colder temperatures than those at sea level. This is a result of the low atmospheric pressure. The likelihood of collisions as the air rises decreases as the number of gas molecules, such as nitrogen, oxygen, and carbon dioxide, increases.
Read more about Latin America at
https://brainly.com/question/1086162
#SPJ1
Analysis and synthesis of data about mid latitude cyclone in cape town
Mid-latitude cyclones, also known as extratropical cyclones, are large-scale low-pressure systems that commonly affect Cape Town and its surrounding regions.
These weather systems form between 30° and 60° latitude and are characterized by frontal systems, bringing both warm and cold air masses into contact, leading to precipitation and temperature fluctuations.
In Cape Town, the analysis of meteorological data has shown that mid-latitude cyclones are most prevalent during the winter months (May to August), when the city experiences increased rainfall and occasional strong winds.
Synthesis of this data has provided insights into the impacts of such cyclones on the local environment, including potential flooding, erosion, and infrastructure damage.
As a result, continuous monitoring and analysis of meteorological data is vital for mitigating the risks associated with these weather systems in Cape Town.
To know more about Mid-latitude cyclones visit:
https://brainly.com/question/31367032
#SPJ11
In circle C with m \angle ∠BCD=46 and BC=3 units, find the length of arc BD. Round to the nearest hundredth. Help pliss
The length of arc of the given circle, to the nearest hundreth, is: 2.41 units.
What is the Length of an Arc?Length of arc = ∅/360 × 2πr, where the radius of the circle is r, and the reference angle is ∅.
We are given the following:
Radius (r) = 3 units
Reference angle (∅)= 46°
Plug in the values into the length of arc formula:
Length of arc = 46/360 × 2π(3)
Length of arc = 2.41 units.
Therefore, the length of arc of the given circle, to the nearest hundreth, is: 2.41 units.
Learn more about length on
https://brainly.com/question/27115340
#SPJ1
When COVID broke out in 2020 how was People treated in the Country
City x experiences very dry conditions in the winter, along with a prevailing northerly wind. in the summer, the prevailing winds shift to southerly and the rainfall at city x increases by a factor of 10. what can you say about the general climate regime of city x
According to the given conditions, we can say that the city x has a monsoon type of climate.
Hence, the correct answer is - the city has a monsoon climate.
Different types of Climate:There are several different types of climate, each characterized by different patterns of temperature, precipitation, etc. Some of the most common types of climate include:
Tropical climate: characterized by high temperatures and heavy rainfall, often with a wet and dry season.Monsoon climate: characterized by distinct wet and dry seasons, with heavy rainfall in the summer and little rainfall in the winter.Dry or arid climate: characterized by low rainfall and high temperatures, with little vegetation.Temperate climate: characterized by moderate temperatures and rainfall, with distinct seasons.Continental climate: characterized by cold winters and warm summers, with moderate to low rainfall.Polar climate: characterized by extremely cold temperatures and very low precipitation.Mediterranean climate: characterized by mild, wet winters and hot, dry summers.Know more about Monsoon Climate here:
https://brainly.com/question/31388072
#SPJ4
The given question is incomplete. Hence, the complete question is:
City X experiences very dry conditions in the winter, along with a prevailing northerly wind. In the summer, the prevailing winds shift to southerly and the rainfall at City X increases by a factor of 10. What can you say about the general climate regime of City X?
A) It has a monsoon climate.
B) It must be located under the ITCZ for most of the year.
C) It must be located deep in the interior of a large continent.
D) It is probably at a high latitude.
Describe what the weather would be like as a warm front passes. Then, describe what would occur as a cold front passes
As a warm front passes, the weather would be humid and as a cold front passes than the temperature would drop more than 15 degrees within an hour.
Since warm air is denser and more difficult to remove from the surface of the Earth than cold air, warm fronts move at a slower pace than the cold fronts that typically follow them. As a result, scale disparities in temperature across warm fronts are likewise forced to be larger.
In a noticeable surface trough of low pressure, a cold front is the front end of a cooler mass of air at ground level that substitutes a warmer body of air.
To learn more about warm front here
brainly.com/question/20039087
#SPJ4
