write the transitional metals and their electronic configuration​

Answer:

no idea about this question sorry

The molar volume of a gas at standard temperature and pressure is 22.4L

Because the particles in gases are compressible, they can be driven to enclose one another when subjected to high pressure. As a result, the volume of the gas is smaller and there is less free space. The temperature has an impact on gas volume as well. A gas expands as a result of its molecules moving more quickly when it is heated. The comparison of gas volumes must be done at standard temperature and pressure due to the variation in gas volume caused by variations in pressure and temperature. The definition of standard temperature and pressure (STP) is (273.15K) and 1atm pressure. The volume of one mole of a gas at STP is its molar volume. A mole (6.02 x 10^23 typical particles) of any gas takes up 22.4L at STP.

using ideal gas law:-

PV =nRT

P = 1.00atm

n = 1.00 mol

R = 0.0821 L atm/mol  K

T = 273 K

V = ?

V = nRT/P

V = (1.00 x 0.081 x 273)/1.00

V = 22.4 L

To know more about molar volume refer to:-

https://brainly.com/question/24780351

#SPJ10

Railroad tracks built with a flexible expansion and contraction joint because the tracks have a larger coefficient of linear expansion than the ground beneath. Hence, Correct opotion is option (A)

The linear expansion of a solid under a change in temperature can be measured using Δℓ/ℓ = αΔT and has applications in the ways solids expand and contract in everyday life.

The strain that the object undergoes has implications in engineering when fitting objects among each other.

Hence, Railroad tracks built with a flexible expansion and contraction joint because the tracks have a larger coefficient of linear expansion than the ground beneath. Therefore, Correct opotion is option (A)

Learn more about linear expansion here ;

https://brainly.com/question/14780533

#SPJ1

A Chemical change occurs when methane gas is burned.

A chemical change is a change of materials into another, new materials with different properties and one or more than one new substances are formed.

A chemical change occurs when matter undergoes a change to form a new substance with different chemical properties, and the reaction is usually not reversible.

In this case,burning of methane gas (CH₄) considered as chemical change.

Oxygen and methane are the reactants, while the new substance formed from the reaction are carbondioxide (CO₂) and water (H₂O) as ;

CH₄ + O₂  --->  CO₂ + H₂O

Hence, Chemical change occurs when methane gas is burned.

Learn moe about chemical change here ;

https://brainly.com/question/23693316

#SPJ1

-1.09'C is the change in freezing point

“Freezing point depression” depends on the solvent and the molar concentration of the solute.

Sulfide is highly basic, consequently

K2S

completely and irreversibly hydrolyzes in water according to the following equation:

K2S+H2O→KOH+KSH

Freezing, also known as solidification, is a phase transition where a liquid turns into a solid when its temperature is lowered below its freezing point.

the temperature at which a liquid solidifies specifically : the temperature at which the liquid and solid states of the substance are in equilibrium at atmospheric pressure : melting point the freezing point of water is 0° Celsius or 32° Fahrenheit.

Learn more about change in freezing point here:https://brainly.com/question/23035406

#SPJ10

Answer:1.0881

Explanation:

Explanation:

Ammonia has a formula mass of 17.031 g/mol, so the top blank is 1 and the bottom blank is 17.031

Calculating the product, we get the answer to be 1.5 mol

The speed of light through space is 300 million m/s .

There was a time when everybody thought that there is no limit for the speed at which an object can travel , but Einstein gave the limit which is the speed of light.

The speed of the light in vacuum travels at a speed of 300 million m/s .

Therefore The speed of light through space is 300 million m/s .

To more about Limit of the speed

https://brainly.com/question/8900007

#SPJ1

Answer:

(i)

Explanation:

is it right

brainliest?

The number of moles of oxygen required to completely react with 54 g of aluminum is 1.5 moles.

moles = reacting mass/molar mass

moles = 54/27

moles = 2 moles

From the given reaction of oxygen and aluminum;

4Al +  30₂   →   2Al₂O₃

4 moles of Al ----------> 3 moles of oxygen

2 moles of AL --------> ? moles of oxygen

= (2 x 3)/4

=  1.5 moles

Thus, the number of moles of oxygen required to completely react with 54 g of aluminum is 1.5 moles.

Learn more about number of moles here: https://brainly.com/question/15356425

#SPJ1

Answer:

I d K

Explanation:

The alkaline permanent waves have a pH between 9.0 to 9.6.

Alkaline permanent waves are chemical that is apply to the hair. The alkaline perm makes the hair curly or wavy.

The major ingredient is the ammonium thioglycolate and ammonium hydroxide.

The alkaline permanent wave is alkaline in nature and the pH scale for alkaline substances are higher.

pH of 7 depicts neutrality while pH of 7 and above depicts alkalinity.

Therefore, alkaline permanent waves have a pH between 9.0 to 9.6.

learn more on alkaline permanent waves here: https://brainly.com/question/19756877

#SPJ12

Answer:

empirical formula is the simplest formula of a compound with 4.433g phosphorus and 5.717g ooxygen.

Answer:

Below

Explanation:

Units of specific heat are   J / (g- °C)

    so to get these units :

             1259 J / (25 g *6.1 °C) = 8.26  J / (g °C)

Answer:

The bell and the Eiffel tower

The number of moles of gas lost is  0.0213 mol. It can be solved with the help of Ideal gas law.

According to this law, "the volume of a given amount of gas is directly proportional to the number on moles of gas, directly proportional to the temperature and inversely proportional to the pressure. i.e.

PV = nRT.

Where,

Therefore, the number of moles is

n = PV / RT

State 1 :

State 2 :

The loss in moles of gas from state 1 to state 2 is

Δn = V/R (P₁/T₁ - P₂/T₂ )

V/R = (1.75 x 10⁻³ m³)/(8.314 (N-m)/(mol-K) = 2.1049 x 10⁻⁴ (mol-m²-K)/N

p₁/T₁ = (225 x 10³)/298 = 755.0336 N/(m²-K)

p₂/T₂ = (185 x 10³)/283 = 653.7102 N/(m²-K)

Therefore,

Δn = (2.1049 x 10⁻⁴ (mol-m²-K)/N)*(755.0336 - 653.7102 N/(m²-K))

    = 0.0213 mol

Hence, The number of moles of gas lost is 0.0213 mol.

Learn more about ideal gas here ;

https://brainly.in/question/641453

#SPJ1

Various samples of the must be combusted in other to obtain a reliable result.

The bomb calorimeter is used to obtain the energy of a sample. This is called the energy equivalent or the energy value of the sample.

Now, we know that the bomb calorimeter is calibrated by the use of benzoic acid hence it must be combusted first to obtain the basic energy value of the calorimeter.

Various samples of the must be combusted in other to obtain a reliable result.

Learn more about bomb calorimeter:https://brainly.com/question/24245395?

#SPJ1

Answer: Crystallization is a technique which chemists use to purify solid compounds. Crystals often form in nature when liquids cool and start to harden. Certain molecules in the liquid gather together as they attempt to become stable. They do this in a uniform and repeating pattern that forms the crystal. The process is based on the principles of solubility: compounds (solutes) tend to be more soluble in hot liquids (solvents) than they are in cold liquids. If a saturated hot solution is allowed to cool, the solute is no longer soluble in the solvent and forms crystals of pure compound. Impurities are excluded from the growing crystals and the pure solid crystals can be separated from the dissolved impurities by filtration.
For an example the salt we get from seawater can have many impurities in it. Hence, the process of crystallization is in use to remove these impurities.

∩_∩
(„• ֊ •„)♡
┏━∪∪━━━━┓
   hope it helped
┗━━━━━━━┛

As the solution cools, the solvent can no longer hold all of the solute molecules, and they begin to leave the solution and form solid crystals.

During this cooling, each solute molecule in turn approaches a growing crystal and rests on the crystal surface.

Hope this helps!!

>Rijja<

Please mark Brainliest!

Would be well appreciated :)

Answer:

their valence electrons are free roaming

The magnetism is either created inside a given element by passing some number of charges,Q across it or it is due to the interaction with a permanent magnet.

A physical phenomenon produced by the motion of electric charge, which results in attractive and repulsive forces between objects.

The magnet consists the characteristics of having an optimum amount of energy (P.E inside it) inside it.

As, the energy lines are either directed outwards from the north pole of the magnet, the south pole of the magnet consumes or absorbs the magnetic rays(energy lines) originated from the north pole of the magnet.

Learn more about magnetism here ;

https://brainly.com/question/2841288

#SPJ1

Scientific theories are always testable. A theory may be changed as a result of new observations.

A scientific theory is a set of laws, facts and hypotheses that have a complete vision of an aspect of reality.

It is a proposed explanation for a set of observable phenomena.

It allows in this way to organize and understand the observations and to be able to predict or provoke other future observations.

Theories can be modified or improved as more information is collected.

That is, theories can continue to be tested indefinitely, and eventually rejected, if the tests lead to it.  

Therefore, a scientific theory is testable by using a research method.

As mentioned, any theory can be tested or rejected as more information is collected.

This information to prove or reject theories are interpretations of observable facts, which generates new statements or allows to accept those already included in the theory.

Then, a theory may be changed as a result of new observations.

Finally, scientific theories are always testable. A theory may be changed as a result of new observations.

Learn more about Scientific theory here ;

https://brainly.in/question/5629361

#SPJ1

Answer:

testable & new observations

Explanation:

Answer:

a.  P = 320 mmHg

Explanation:

For this problem, the pressure, volume, and temperature are changing, so we'll need to combine Boyle's Law and Charles' Law:

[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}[/tex]

For this equation, the temperatures must be measured in Kelvin.  The rest of units in the equation only need to match between beginning and end conditions.

Recall that to convert from Celsius to Kelvin, add 273, or use the equation [tex]T_C+273=T_K[/tex].

So [tex]T_1=(44.4+273)[K]=317.4[K][/tex]  and [tex]T_2=(68.1+273)[K]=341.1[K][/tex]

Substituting known values, we can solve for the unknown:

[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}[/tex]

[tex]\dfrac{(574.6[mmHg])(208.1[mL])}{(317.4[K])}=\dfrac{P_2(401.5[mL])}{(341.1[K])}[/tex]

[tex]\dfrac{(574.6[mmHg])(208.1[mL]\!\!\!\!\!\!\!\!\!\!{--} )}{317.4[K]\!\!\!\!\!\!{-}}*\dfrac{341.1[K] \!\!\!\!\!\!{-}}{401.5[mL] \!\!\!\!\!\!\!\!\!\!\!{--} }=\dfrac{P_2(401.5[mL] \!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{-----})}{341.1[K] \!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{----}}*\dfrac{341.1[K] \!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{----}}{401.5[mL] \!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{-----} }[/tex]

[tex]320.056719296[mmHg]=P_2[/tex]

Accounting for significant figures, [tex]P_2=320.1[mmHg][/tex].  

The closest answer provided is 320, so "a".

The primary distinction between the digestive systems of cows and humans is that the former uses a foregut fermenter while the latter uses a straightforward monogastric digestion. The types of teeth, mouths, stomachs, guts, and digestive enzymes released by the gut also vary between the two digestive systems. Cows and humans have different digestive systems because they have evolved two different sorts of dietary patterns based on their capacities. The primary distinctions between the digestive systems of cows and humans are in the types of teeth, mouths, stomachs, and intestines, as well as the enzymes released.

Answer:

The main difference between cow and human digestive system is that cow exhibits a foregut fermenter digestion whereas human exhibits a simple monogastric digestion. Both digestive systems also differ by the type of teeth, mouth, stomach, gut, and digestive enzymes secreted by the gut.

Explanation:

[tex]\quad \huge \quad \quad \boxed{ \tt \:Answer }[/tex]

[tex]\qquad \tt \rightarrow \:36 \:\: g [/tex]

____________________________________

[tex] \large \tt Explanation \: : [/tex]

The given compound has 3 carbon atoms, so in 1 mole of that compound, there will be 3 moles of carbon atoms.

Mass of each mole of carbon atoms = 12 g

For 3 mole carbon atoms, it will be 12 × 3 = 36 grams

Answered by : ❝ AǫᴜᴀWɪᴢ ❞

The mass in grams of butane at standard room temperature is 53.21 grams.

The gram of an organic substance at room temperature can be determined by using the ideal gas equation which can be expressed as:

PV = nRT

1 × 22.4 L = n × (0.0821 atm*L/mol*K×  298 K)

n = 22.4/24.4658 moles

n = 0.91556 moles

Recall that:

mass of butane = 0.91556 moles × 58.12 g/mole

mass of butane = 53.21 grams

Learn more about calculating the mass of an organic substance here:

https://brainly.com/question/14686462

#SPJ12

Answer:

1- Hydrogen enters plants as a component of water.

2-Hydrogen combines with carbon dioxide to make glucose.

Explanation:

Hydrogen enters the plant bonded with Oxygen as water (H2O).

The water molecule splits and the Hydrogen combines with carbon dioxide to make glucose.

Answer:

1 - Hydrogen enters plants as a component of water.

2 - Hydrogen combines with carbon dioxide to make glucose.

Explanation:

Answer:

the answer to the question is X3Y2