Answer:
b c
Explanation:
right
Answer:
it was A C for me
Explanation:
When talking about the products of photosynthesis, why is it a HUGE issue when a vast amount of the rainforests is dying along with vast amounts of forests from fires/deforestation? Remember, we know that this hurts the ecosystems of animals living there, but what else does it effect?
Question 5 options:
the creation of oxygen
the creation of too much smoke
the creation of carbon monoxide
the creation of carbon dioxide
Answer:
the creation of oxygen.
Explanation:
how many molecules are there in 1.5 mol of methane
Answer: A mole of something means that there are 6.02 X 10^23 of that something. So, a mole of methane molecules is 6.02 X 10^23 methane molecules. So, 1.5 moles of methane will contain 1.5*(6.02 X 10^23) = 9.0 X 10^23 methane molecules
Explanation:
How many grams of H,O are needed to produce 13 g of NaOH? 2 Na,O2 + 2 H20-4 NaOH + O2
Answer:
This is a typical stoichiometry question.To answer this question you want to get a relationship between
N
a
2
O and NaOH.
So you can get a relationship between the moles of
N
a
2
O
and moles of NaOH by the concept of stoichiometry.
N
a
2
O +
H
2
O ----------------> 2 NaOH.
According to above balanced equation we can have the stoichiometry relationship between
N
a
2
O and NaOH. as 1:2
It means 1 moles of
N
a
2
O is required to react with one mol of
H
2
O to produce 2 moles of NaOH.
in terms of mass 1 mole of
N
a
2
O has mass 62 g on reaction with water produces 2 moles of NaOH or 80 g of NaOH.
62 g of
N
a
2
O produces 80 g of NaOH.
1g of NaOH is produced from 62/80 g of
N
a
2
O
1.6 x
10
2
g of NaOH will require 62 x 1.6 x
10
2
g / 80 of
N
a
2
O
124g of
N
a
2
O.
Explanation:
As a team, determine the rules for naming binary ionic compounds that have a "special" transition metal in it when given the formula.
Answer:
Metal name (charge in roman numerals) Non metal
for example Iron (III) chloride
Explanation:
The rule for naming special transition metal are as follows -
a) First name the transition metal
b) Now write the name of the non metal in the chemical formula.
c) Write the charge for the non metal.
d) If there is a polyatomic ion, write the Common Ion Table ,its formula and charge.
e) Based on the total charge on the non-metal or polyatomic ion, deduce the total charge on the transition metal
f) Write the charge of transition metal after the name of metal in Roman Numeral in parentheses
Se queman 87,0 g de butano con oxígeno produciéndose dióxido de carbono y agua. Calcular la masa de oxígeno necesaria y la masa de dióxido de carbono y de agua que se desprenderá
Answer:
312g O₂ son necesarios, se producen 264g CO₂ y 135g H₂O
Explanation:
La combustión de butano para producir CO₂ y H₂O ocurre así:
C₄H₁₀ + 13/2O₂ → 4CO₂ + 5H₂O
Donde 1 mol de butano reacciona con 13 moles de oxígeno para producir 4 moles de dióxido de carbono y 5 moles de agua.
Para resolver este problema debemos convertir la masa de butano a moles y, usando la reacción balanceada, obtener cuánto se necesita de oxígeno y cuánto se produciría de dióxido de carbono y agua:
Moles butano -Masa molar: 58.12g/mol-:
87.0g * (1mol / 58.12g) = 1.50 moles
Moles y masa de oxígeno necesarias para la reacción -Masa molar: 32g/mol-:
1.50 moles C₄H₁₀ * (13/2 moles O₂ / 1 mol C₄H₁₀) = 9.75 moles * (32g/mol) =
312g O₂ son necesarios
Moles y masa de dióxido de carbono producidas -Masa molar: 44.01g/mol-:
1.50 moles C₄H₁₀ * (4 moles CO₂ / 1 mol C₄H₁₀) = 6 moles * (44.01g/mol) =
264g CO₂ se producen
Moles y masa de agua producidas -Masa molar: 18.015g/mol-:
1.50 moles C₄H₁₀ * (5 moles H₂O / 1 mol C₄H₁₀) = 7.5 moles * (18.015g/mol) =
135g H₂O se producen
If you were standing on a beach during the day time, what direction might you feel a
breeze from? Explain why this happens.
Answer:
hi
Explanation:
if your standing in the beach for like in hour and then the temp will start to drop your body heating will start to go down to .
Do number 5 vote you brainlest thanks
Answer:
DNA
Explanation:
because genetics come from DNA
Which of the following is the correct definition of partial pressure *
A) The total pressure exerted by all gases in the mixture
B) The contribution each gas in a mixture makes to the total pressure
C) The space occupied a gas in the mixture
D) The amount of gas particles present in a mixture
Answer:A
Explanation:
Choose the aqueous solution below with the highest boiling point. These are all solutions of nonvolatile solutes and you should assume ideal van't Hoff factors where applicable.
A) 0.075 m NaI
B) 0.075 m (NH4)3PO4
C) 0.075 m NaBrO4
D) 0.075 m LiCN
E) 0.075 m KNO2
Answer:
B. (NH₄)₃PO₄
Explanation:
Elevation of boiling point is one of the colligative properties.
Formula is: ΔT = Kb . m . i
ΔT = Boiling T° of solution - Boiling T° of pure solvent.
i = Van't Hoff factor (numbers of ions dissolved)
Kb = Ebulloscopic constant
In this case, all the m are the same so let's dissociate the salts:
NaI → Na⁺ + I⁻ i = 2
(NH₄)₃PO₄ → 3NH₄⁺ + PO₄⁻³ i = 4
NaBrO₄ → Na⁺ + BrO₄⁻ i = 2
LiCN → Li⁺ + CN⁻ i = 2
KNO2 → K⁺ + NO₂⁻ i = 2
The biggest i would have the biggest boiling point, then B is the right answer, ammonium phosphate.
You count the i, with the moles of ions, you dissociate from the salt.
Identify this reaction.
NH3 + H2SO4 → (NH4)2SO4
O decomposition
O synthesis
O double displacement
O single displacement
Answer: synthesis
Explanation:
Answer:
Synthesis
Explanation:
Two compounds combine to produce one compound
3- Given 90.0 g C6H1206
a- How many moles of Glucose are present in 90.0 g of glucose?
molar mass = 180.18
//
[tex]90.0 \: g \times \frac{1 \: mol}{180.18 \: g} = 0.4995004995 \: mol[/tex]
[tex] = 0.500 \: mol[/tex]
What is true of experimental designs that are used in scientific research? The designs use the same steps in every kind of research. The designs follow a general method that is familiar to all scientists. The designs ensure that the experimental data supports the hypothesis. The designs are kept secret so that others must do their own experiments.. The answer is B.) "The designs follow a general method that is familiar to all scientists."
Answer:
The designs ensure that the experimental.
Explanation:
Scientific research refers to the-fact finding inquiry to answer the questions related to natural processes. A hypothesis is a situation or an assumption that needs to be proved by applying scientific produces. Experimental design refers to the methodology, which is applied to conduct research.
The designs ensure that the experimental data support the hypothesis is the true statement regarding experimental designs that are used in scientific research because an experimental design should be concerned with the fact that it is relevant or appropriate to prove a hypothesis.
Answer:
its c. the designs follow a general method that is familiar to all scientists
Explanation:
What are the effects of colonialism on Africa today?
Colonialism made African colonies dependent by introducing a mono- cultural economy for the territories. It also dehumanized African labour force and traders. It forced Africans to work in colonial plantations at very low wages and displaced them from their land
In the reaction 2CO2+ 2H2O -> C2H4 + 3O2 , the mole ratio of water to oxygen is
I'm gonna guess 2:3 because you have two moles of water and three moles of oxygen
How much 2.0 M NaCl solution would you need to make 250 mL of 0.15 M NaCl solution?
Answer:
18.75 mL
Explanation:
(M1)(V1)=(M2)(V2)
(2.0 M)(V1)=(0.15 M)(250 mL)
(2.0)(V1)=37.5
Divide 2.0 on both sides
V1=18.75 mL
Why is sterilising the water rarely used in treating the sewage water?
Answer:
Sterilizing the water rarely used in treating the sewage water is described below in details.
Explanation:
Sterilization is the application of a chemical or physical system to eradicate all microorganisms, concluding comprehensive amounts of bacterial content. Heat treatment is the most relevant approach for the sterilization of waste-water that accommodates large levels of masses. well now sterilizing the water is un-usually practiced in managing the sewage water.
Use the following chemical equation to answer the question. 4K(s) + O2(g) → 2 K2O(s). If a staff member at a laboratory has 12.0 grams of potassium metal, what is the theoretical yield of potassium oxide that the scientist could potentially produce from the reaction with oxygen gas?
A) 9.96 grams of K2O
B) 14.5 grams of K2O
C) 28.9 grams of K2O
D) 57.8 grams of K2O
Answer:14.5 grams of K2O
Explanation:
4K(s) + O2(g) → 2 K2O(s). If a staff member at a laboratory has 12.0 grams of potassium metal, 14.5 grams of K2O is the theoretical yield of potassium oxide that the scientist could potentially produce from the reaction with oxygen gas. Therefore, option B is correct.
What is theoretical yield ?The yield of a reaction is used to represent how much of a product is produced from that reaction. The theoretical yield is the quantity of product that stoichiometry predicts will be produced, whereas the actual yield is the amount that is actually produced.
Divide the ratio by the limiting reactant's molecular weight. The answer is the theoretical yield of the desired product in moles.
It is useful to know how much product will be created with specific reactant amounts before carrying out chemical reactions. The theoretical yield is what is meant by this. This method can be applied to determine the theoretical yield of a chemical reaction.
Thus, option B is correct.
To learn more about theoretical yield, follow the link;
https://brainly.com/question/175584
#SPJ2
Pliss help
A)random change
B)natural selection
C) artificial selection
D)inbreeding
And why
Answer: I believe it is artificial selection (not certain though)
Explanation: modern day dogs have been bread an domesticated to be used by humans in ways we see fit.
What are the elements in group two called
Answer: Alkaline-earth metal, any of the six chemical elements that comprise Group 2 (IIa) of the periodic table. The elements are beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra). Hopefully i helped
Explanation:
Answer: Alkaline-earth metal
Explanation:
How are the atomic number and the number of protons related to each other?
Answer:
Neutral atoms of each element contain an equal number of protons and electrons. The number of protons determines an element's atomic number and is used to distinguish one element from another. ... Together, the number of protons and the number of neutrons determine an element's mass number.
Explanation:
Calculate number of g H3PO3 formed from 53.6 g H2O react with excess PCl3?
PCl3 + H2O → HCl + H3PO3
81.3 g H₃PO₃
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Reading a Periodic TableStoichiometry
Reaction Molar RatiosUsing Dimensional AnalysisExplanation:Step 1: Define
[RxN - Unbalanced] PCl₃ + H₂O → HCl + H₃PO₃
↓
[RxN - Balanced] PCl₃ + 3H₂O → 3HCl + H₃PO₃
[Given] 53.6 g H₂O
[Solve] x g H₃PO₃
Step 2: Identify Conversions
[RxN] 3 mol H₂O → 1 mol H₃PO₃
[PT] Molar Mass of H - 1.01 g/mol
[PT] Molar Mass of O - 16.00 g/mol
[PT] Molar Mass of P - 30.97 g/mol
Molar Mass of H₂O - 2(1.01) + 16.00 = 18.02 g/mol
Molar Mass of H₃PO₃ - 3(1.01) + 30.97 + 3(16.00) = 82.00 g/mol
Step 3: Stoich
[S - DA] Set up: [tex]\displaystyle 53.6 \ g \ H_2O(\frac{1 \ mol \ H_2O}{18.02 \ g \ H_2O})(\frac{1 \ mol \ H_3PO_3}{3 \ mol \ H_2O})(\frac{82.00 \ g \ H_3PO_3}{1 \ mol \ H_3PO_3})[/tex][S - DA] Multiply/Divide [Cancel out unit]: [tex]\displaystyle 81.3023 \ g \ H_3PO_3[/tex]Step 4: Check
Follow sig fig rules and round. We are given 3 sig figs.
81.3023 g H₃PO₃ ≈ 81.3 g H₃PO₃
what is the answer to this
Answer:
Explanation:
i may be wrong but i think its b
Answer:
B Ndaira is right for real
What feature of the sun changes to create the solar cycle?
a
Brightness
Hydrogen gas
Nuclear fusion
Magnetic field
Table sugar and salt are examples of? A. mixtures B. elements C. atoms D. compounds
Answer:
The answer is compound because they consist of multiple things.
Can someone help me ASAP.
Answer:
This type of mutation occurs when one or more base pairs are added to the gene sequence: insertion
This type of mutation occurs when one or more base pairs take the place of other base pairs in the gene sequence: substitution
Which statement about an object in motion is correct?
Help
Which type of model is described below? A scientist thinks of the inside of a tree as being like a giant straw that can suck up water A. Atomic model B. Physical model C. Mathematical model D. Conceptual model
Answer:
B. Physical model
Explanation:
Out of the four of them this is the one that makes the most sense
Katrina inserts a key into her car’s ignition. She turns the key, putting her car into ignition mode. In this mode, some energy is used to increase the temperature of the car’s fuel. This energy allows the fuel to combust and the car to move. What’s this energy called?
A.
absorbed energy
B.
activation energy
C.
chemical energy
D.
released energy
E.
solar energy
Answer:
B
Explanation:
Answer:
the correct answer is B
Explanation:
why are gases able to spread out and fill whatever container they are in
Answer:
gases are able to spread out and fill whatever container they are in because they do not have. a definite shape their molecules are not tightly packed so they can cover over a vast area like our atmosphere.
what's the formula for hypoarsenous acid?
Answer:
As(OH)3 or AsH3O3
Explanation:
