Answer:
B) water and salt is the result of neutralization reaction
Water and salts are the product of a neutralization reaction.
NEUTRALIZATION REACTION:
Neutralization reaction is a type of reaction between an acid and a base to form a salt and water. In a neutralization reaction, the hydrogen ion (H+) and hydroxyl ion (OH-) are released from the acid and base respectively and are combined to form water. An example is the reaction between hydrochloric acid (HCl) as an acid and sodium hydroxide (NaOH) as a base to form sodium chloride (NaCl) as salt and water (H2O). Therefore, water and salts are the product of a neutralization reaction.Learn more at: https://brainly.com/question/20038776?referrer=searchResults
How many atoms are in 9.35 moles of lithium?
Answer:
Answer: 3.45 moles Li contains 2.08 × 10 (to the power of)24 atoms . Explanation: The relationship between atoms and moles is:. 1 mole atom. =6.022
Answer:
[tex]\boxed {\sf 5.63 \times 10^{24} \ atoms \ Li}}[/tex]
Explanation:
We are asked to find how many atoms are in 9.35 moles of lithium (Li)
Moles are converted to atoms using Avogadro's Number or 6.022×10²³. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance. In this case, the particles are atoms of lithium.
We convert using dimensional analysis, so we set up a conversion factor using Avogadro's Number.
[tex]\frac {6.022 \times 10^{23} \ atoms \ Li}{1 \ mol \ Li}[/tex]
We are converting 9.35 moles of lithium to atoms, so we multiply the conversion factor by this value.
[tex]9.35 \ mol \ Li *\frac {6.022 \times 10^{23} \ atoms \ Li}{1 \ mol \ Li}[/tex]
The units of moles of lithium cancel.
[tex]9.35 *\frac {6.022 \times 10^{23} \ atoms \ Li}{1 }[/tex]
[tex]9.35 *{6.022 \times 10^{23} \ atoms \ Li}[/tex]
[tex]5.63057\times10^{24} \ atoms \ Li[/tex]
The original value of moles (9.35) has 3 significant figures, so our answer must have the same. For the number we found that is the hundredth place. The 0 in the thousandth place tells us to leave the 3 in the hundredth place.
[tex]5.63 \times 10^[24} \ atoms \ Li[/tex]
9.35 moles of lithium contains approximately 5.63×10²⁴ atoms of lithium.
Assuming that the volumes are additive, and the gases behave ideally, calculate the entropy of 12.0 L of N2 with 4.00 L of N2O at 250 K and 0.550 atm. (20 points) Write a meaningful comment on your findings. (5 points)
This problem is describing a gaseous system composed by 12.0 L of nitrogen and 4.00 L of dinitrogen monoxide at 250 K and 0.550 atm. In addition, it is asking for the entropy of the system assuming it is ideal and the volumes are additive; this means we can use the following equation for the entropy of the mixture:
[tex]S_{mix}=-n_{N_2}*R*ln(\frac{n_{N_2}}{n_{N_2}+n_{N_2O}} )-n_{N_2O}*R*ln(\frac{n_{N_2O}}{n_{N_2}+n_{N_2O}} )[/tex]
It means we need to calculate the moles of both gases, which can be obtained by using the ideal gas equation for the common T,P conditions and the volume of each gas:
[tex]n_{N_2}=\frac{PV_{N_2}}{RT} =\frac{0.550atm*12.0L}{0.08206\frac{atm*L}{mol*K}*250K} =0.322mol\\\\n_{N_2O}=\frac{PV_{N_2O}}{RT} =\frac{0.550atm*4.00L}{0.08206\frac{atm*L}{mol*K}*250K} =0.107mol[/tex]
Next, we recall the aforementioned equation for the calculation of the entropy and plug in the values:
[tex]S_{mix}=-8.3145\frac{J}{mol*K}[0.322mol*ln(\frac{0.322mol}{0.322mol+0.107mol} )+0.107mol*ln(\frac{0.107mol}{0.322mol+0.107mol} )]\\\\S_{mix}=2.00\frac{J}{mol*K}[/tex]
Learn more:
https://brainly.com/question/15175445https://brainly.com/question/25026056HELP PLS (CHEMISTRY)
How is writing formulas for ionic compounds with transition metals different from the regular metals?
The first most obvious thing to note is when naming transitional metals, you have to state its charge with roman numerals (except for 1 if I remember correctly). For example, Iron (lll), iron has a charge of 3.
Which two statements are true? A. Each particle of a compound consists of a single type of atom. B. All particles of a compound have the same chemical formula. C. The atoms in a particle of a compound are held together by chemical bonds. D. Different kinds of matter in a compound can be separated by physical means.
Answer: A and C
Explanation: For example, the compound HCl (hydrogen chloride) is comprised for 2 different types of atoms: one hydrogen and one Chlorine. In order to fuse these two elements together to form a compound, they must bond in one of three ways- ionic, covalent or metallic
The two statements that are true are as follows:
All particles of a compound have the same chemical formula.The atoms in a particle of a compound are held together by chemical bonds.Thus, the correct options for this question are A and C.
What is a Chemical compound?A chemical compound may be defined as a type of chemical substance that is mainly composed of many similar molecules that contain atoms of more than one chemical element. These atoms are typically held together by chemical bonds.
If you take the example of NaOH where you will find three elements such as sodium, oxygen, and hydrogen. Each of these chemical elements is held together by chemical bonds in order to form sodium hydroxide.
The atoms of sodium hydroxide would not change their chemical formula when it is present as a chemical compound.
Therefore, the correct options for this question are A and C.
To learn more about Chemical compounds, refer to the link:
https://brainly.com/question/26487468
#SPJ2
Please help me !!!!!!!!!!!!!!!!!!!!!!
Answer:
sure ill help you
Explanation:
what are two ways to increase thermal energy are
Which of the following correctly identifies the intermolecular force represented by A and compared its strength relative to the intermolecular force represented by B
A represents hydrogen bonding, which is weaker than the force represented by B correctly identifies the intermolecular force represented by A and compared its strength relative to the intermolecular force represented by B. Therefore, option B is correct.
What is intermolecular force ?Intermolecular forces, such as electromagnetic forces of attraction or repulsion that act between atoms and other kinds of nearby particles, such as atoms or ions, mediate interactions between molecules.
The forces that draw molecules together are known as intermolecular forces. These forces are crucial because they enable chemists to ascertain a substance's state, melting point, boiling temperature, and other physical characteristics. The higher the melting and boiling temperatures are, the stronger the intermolecular forces are.
The strength of the London force will differ greatly if the molecules have highly different molar masses (by a factor of 2 or more).
Thus, option B is correct.
To learn more about intermolecular force, follow the link;
https://brainly.com/question/17111432
#SPJ2
your question is incomplete, probably the question was Which of the following correctly identifies the intermolecular force represented by A and compared its strength relative to the intermolecular force represented by B A represents London dispersion forces, which are weaker than the force represented by B. A represents hydrogen bonding, which is weaker than the force represented by B. A represents London dispersion forces, which are stronger than the force represented by B. A represents hydrogen bonding, which is stronger than the force represented by B.
solveeeeee plzzzzzzzzz
FIVE SENTENCES OR MORE
All of your body’s cells need oxygen and all of your body’s cells produce carbon dioxide. Name and describe how the organ systems pictured above work together to:
1. Get oxygen to your body.
2. Distribute oxygen throughout your body.
3. Get rid of carbon dioxide your body produces.
Answer:
Explanation:
In the tiny capillaries of the body tissues, oxygen is freed from the hemoglobin and moves into the cells. Carbon dioxide, made by the cells as they do their work, moves out of the cells into the capillaries, where most of it dissolves in the plasma of the blood.
Blood rich in carbon dioxide then returns to the heart via the veins. From the heart, this blood is pumped to the lungs, where carbon dioxide passes into the alveoli to be exhaled.
Alkanes are considered as saturated hydrocarbons and thus...
A.have only single bonds
B.contain a benzene ring
C.contain a triple bond
D.contain at least one double bond
Answer:
A
Explanation:
Option A is correct. Saturated hydrocarbons are stable compounds, which means that they only have single bonds between carbon atoms.
I need to solve #5 and #6
Answer:
hello
Explanation
sup
help me plEaseeeeee im so confused
Answer:
I believe it the last one it make the most sense
what is the volume of 2.00 moles of chlorine (Cl2) at STP, to the nearest tenth of a liter? STOICHIOMETRY 1mole=22.4L
What do these two changes have in common?
help please thank you so muchhh
³
hope it helps!correct me if I'm wrong
1. Name three obstacles that Mendeleev faced in his life?
Answer:
was difficult to place isotopes of elements as they have the same chemical properties but different atomic masses. It was not possible to predict how many elements could be discovered between two heavy elements as the rise in atomic mass is not uniform.
The three obstacles that Mendeleev faced in his life include the following:
He found it difficult to place isotopes of elements in a group He found it difficult to fit some elements in the periodic table.He had marital problems which made him practice bigamy.Who was Mendeleev?Mendeleev was of Russian region and was instrumental in the formation of
the periodic law and table. He faced several challenges such as marital
issues and also in the formulation of the periodic table as it became
ambiguous for him.
He couldn't fit in some elements on the table due to differences in the order
of atomic masses .
Read more about Mendeleev here https://brainly.com/question/11286917
MgCl,
+
K—>
balance the equation
Answer:
MgCl2 +2K= 2KCl+ Mg
Explanation:
I think MgCl2 you meant
The arrow and
blue colored
blocks indicate
the
elements.
NO LINK
Answer:
The arrow and blue colored blocks indicate the transition metal elements
Explanation:
B.
"The arrow and blue colored blocks in periodic table indicate transition elements. "
What is transition elements?
The type of elements in which the last electrons enter into d-orbital can be referred to as transition elements. They can be placed in the middle of the periodic table. they are indicated with blue color in the periodic table so that it is easy to identify transition element in periodic table. Transition elements can show colored property because it shows d-d transition.
The electronic configuration of transition elements can be shown as:
(n-1)[tex]d^{1-10}[/tex]n[tex]s^{1-2}[/tex].
To know more about transition elements
https://brainly.com/question/18252841
#SPJ2
mineral acids are also classified as????
An inorganic acid......
Commonly used mineral acids are sulfuric acid, hydrochloric acid and nitric acid (they are also known as bench acids). Mineral acids range from superacids (perchloric acid) to very weak ones(boric acid). Mineral acids tend to be very soluble in water and insoluble in organic solvents.
EFFECTS Of The
HUMAN INTERVATION OF THE
CARBON CYCLE.
Explanation:
Human activities have a tremendous impact on the carbon cycle. Burning fossil fuels, changing land use, and using limestone to make concrete all transfer significant quantities of carbon into the atmosphere. ... This extra carbon dioxide is lowering the ocean's pH, through a process called ocean acidification.
can anyone heelp me plz plz
Answer: C=1
Explanation: If you round 1.04 to a single digit its 1
What is the potential energy of your 3 kg puppy that is sitting in the grass in your backyard?
As we know that
P.E. = mgh
where,
P.E. = Potential energy of the object =?
m= mass of object= 3kg
g= acceleration due to gravity = 9.8 ms^-2
h = height between object and animal = 0 m
Then
P.E. = 3× 9.8 × 0 = 0 Joules or 0J
Have a luvely day!
The volume of a gas varies inversely as the pressure upon it. The volume of a gas is 1600 cm3 under a pressure of 4 kg/2. What will be its volume under a pressure of 640 kg/cm2?
Answer:
10cm3
v ∞ 1\p
by introducing a constant k
v = k\p
making k subject of the formula
k= vp
k= 1600×4
k=6400
to find the second volume
k=vp
6400=v×640
v=6400\640
v=10cm3
Which of the following statements is true?
All physical properties depend on how much material you have.
Some physical properties, like mass, volume, and density, depend on how much material you have.
The density of a material may differ as it changes state.
Changing the state of a material from solid to gas, for example, generally makes the material more dense.
Answer:
Es la tercera por qué cuando el material varía va cambiando de estado
Explanation:
A __________ compound is a cyclic compound in which one or more of the ring atoms is an atom other than carbon. g
Answer:
heterocyclic compound
Explanation: by the fact that some or all of the atoms in their molecules are joined in rings containing at least one atom of an element other than carbon
3CH4 and C3H12 have the same number and kind of elements. How are they different?
3CH4 refers to three molecules of a compound and C3H12 refers to only one molecule of a compound.
3CH4 and C3H12 are actually different molecules though they contain the same number and types of atoms. Recall that both of them are hydrocarbons hence they contain only hydrogen and carbon.
3CH4 refers to three molecules of methane while C3H12 refers to one molecule of diphenyl methane. Hence 3CH4 refers to three molecules of a compound and C3H12 refers to only one molecule of a compound.
Learn more: https://brainly.com/question/8646601
How many moles are of sodium are needed to react completely with 3.1 moles of chlorine in the reaction shown below? (Work shown is preferred)
2Na(s) + Cl2(g) —> NaCl(s)
A) 3.1 moles Na
B) 1.5 moles Na
C) 2 moles Na
D) 6.2 Na
Answer: D. 6.2 Na
Explanation: Just took the test
what shows the substance at the highest temperature?
Answer:
needs more information
Explanation:
We need more information (like picture options / etc), but a substance at it's highest temperature will have the most movement in it's molecules. Depending on the substance, it may be in a gas or plasma form (free moving molecules).
Hope this helps, have a nice day! :D
what is the fnction of a cell membrance
Answer:
Maybe to hold the whole parts of the cell
The law of conservation of mass states that mass is neither created nor destroyed during a chemical reaction. This can be gleaned from the third postulate in Dalton's series. Magnesium oxide decomposes into magnesium and oxygen. If 4.03 g of magnesium oxide decomposes to form 2.43 g of magnesium, what mass of oxygen gas is also released in the reaction
Answer:
Explanation:
The law of conservation of mass states that mass is neither created nor destroyed during a chemical reaction. This can be gleaned from the third postulate in Dalton's series. Magnesium oxide decomposes into magnesium and oxygen. If 4.03 g of magnesium oxide decomposes to form 2.43 g of magnesium, what mass of oxygen gas is also released in the reaction
The word say magnesium oxide decomposes to magnesium and oxygen
the chemical symbols say
MgO-----------> Mg + O2 (since natural oxygen is diatomic)
the balanced equation says
2MgO-------------->2Mg + O2
4.03 gm----------> 2.43 + ?0 gms
tour high school Algebra I class says
? = 4.03 -2.43 =1.60
your chemical analytcal lab says %mO in MgO = 16/40.3 = 39.7%
your calculator says
39.7/100 X 4.03 = 1.60
all of these prove the law of conservation of mass
