which of these methods could are used to separate an insoluble solid and soluble solid

-Pure magnesium is commonly made by separating it from seawater. This process is known as electrolysis. The liquid magnesium formed is cooled into convenient blocks of metal known as ingots. The chlorine gas is recycled to form hydrochloric acid for the production of more magnesium chloride.

Answer:

C. The product must solve the problem for which it was designed.

Explanation:

Technological design is the study, development and application of technological process with the intent of designing a product to solve required problem.The process could be based on the use of a computer.

Generally, technological process and development always tend to design a problem solver product. Through this process, more new technologies are produced.

Therefore in technological process, the product must solve the problem for which it was designed.

Answer:

C) The product must solve the problem for which it was designed.

Answer:

Radium-226 is a radioactive decay product in the uranium-238 decay series and is the precursor of radon-222. Radium-228 is a radioactive decay product in the thorium-232 decay series. Both isotopes give rise to many additional short-lived radionuclides, resulting in a wide spectrum of alpha, beta and gamma radiations.

Answer:

sodium, silicon, and argon

Explanation:

castle learning

Answer:

A

Explanation:

Answer:

a

Explanation:

Answer:

The answer is "Option A"

Explanation:

Given:

Moles in [tex]NaOH = 0.50[/tex]

The equation formula for [tex]NaOH[/tex]and[tex]H_2SO_4[/tex] reactions as follows:

[tex]2NaOH+H_2SO_4\rightarrow Na_2SO_4+2H_2O[/tex]

The reaction's stoichiometry:

If 2 moles of [tex]NaOH[/tex] react with 1 [tex]H_2SO_4[/tex] mole

Thus 0.50 [tex]NaOH[/tex] moles react with =  [tex]\frac{1}{2} \times 0.50[/tex] [tex]H_2SO_4[/tex] moles

So, the final value is= 0.25

Answer:

342.14g/mol.

Explanation:

The molar mass of Al2 (SO4)3 is 342.15g/mole.

Reasons that one aluminum atom=26.98. Therefore two aluminum atoms:=2(26.98 g/mole) =53.96 g/mole.

Mass of SO4=96.06g/mol.

Therefore molar mass of Al2(SO4)3= 53.96+(96.06)×3=342.14g/mol

Answer:

342.17 g/mol

Explanation:

Al= 26.98    

S= 32.07

O= 16.00

To calculate that you would have

2(26.98) since there are two Als

and then you have to distribute the 3 to the S and O so...

3S and 12O

which is

3(32.07) + 12(16.00)

which means you add

2(26.98) + 3(32.07) + 12(16.00)

=53.96 + 96.21 + 192

=342.17

there you Go! the final answer is 342.17 g/mol.

Explanation:

Copper(II) carbonate basic, CuCO3•Cu(OH)2(s), is the dull green colour that forms on copper roofs. Copper oxidises in the air to form an approximately equimolar mixture of CuCO3 and Cu(OH)2.The percentage of CuCO3 in the

Answer:

water is the answer

Explanation:

The sugar and water mix to make sweet water but the sun extracts the sugar from the water leaving only normal water

Answer:

water can be evaporated

Explanation:

the water will be evaporated leaving only the sugar residue behind.

Answer:

A) H2O2

Explanation:

Hydrogen peroxide is written as H2O2, which is the chemical formula of the compound, but this can be simplified. Since both H and O have the subscript of 2, they can be simplified to 1, so the empirical formula for H2O2 would be just H and O together (Brainly won't let me say the empirical form because it has the same spelling as a swear word). Thus, the empirical formula and chemical formula are different.

In the case of the other options, they are all in their simplest form and cannot be simplified further, so they are already in their empirical form, so both the chemical form and empirical form are the same.

C.

i cant explain why..................

Answer:

Two design criteria for the design of the ammonia making process are;

1) Sustainable hydrogen production by renewable energy

2)  Sustainable use of the ammonia-water thermal absorption cycle to retrieve the ammonia present in the waster water

Explanation:

Ammonia is produced from natural gas in the following process;

H₂ + RSH → RH + H₂S

H₂S + ZnO → ZnS + H₂O (Waste water)

CH₄ + H₂O → CO + 3H₂

CO + H₂O → CO₂ + H₂

Ammonia is then produced by reacting the produced hydrogen with nitrogen in the presence of a catalyst in a process known as the Haber-Bosch process as follows;

3H₂ + N₂ → 2NH₃

The

The design criteria for the design of the ammonia making process therefore as follows;

1) Sustainable use of renewable energy to produce hydrogen gas from the electrolysis of water

2)  Use of the ammonia-water thermal absorption cycle to retrieve the ammonia present in the waster water.

The branch of science which deals with chemicals and their bond is called chemistry.

The two ways by which we can design ammonia making process is as follows:-

Two design criteria for the design of the ammonia making process are:-

The usage of ammonia is important in these ways:-

Hence, these are the design for the ammonia-making process.

For more information, refer to the link:-

https://brainly.com/question/19524691

Answer:

7.8

Explanation:

pH + pOH = 14

pOH = 14 - 6.2

= 7.8

[H+]=3.98x10^-9

[H+]=10^-pH=10^-8.4

[H+]=10^-11, base

[H+]=10^-pH=10^-11

A solution with a pH of more than 7 is basic.

Lemon juice because it is more acidic

pH of lemon juice: 2.5

pH of vinegar: 3.3

Since the pH of lemon juice is lower, it is more acidic and will be more effective at removing the basic deposits.

When an F atom becomes an F-ion, the F atom gains an electron.

Learn more at: https://brainly.com/question/13495616?referrer=searchResults

The Fluoride ion given has a -ve charge onto it. Thus in order to become stable Fluorine gains an electron. Thus option b is correct.

The elements in the periodic table try to attain the stable noble gas configuration in the order to become stable. The noble gas configuration has the elements to be less reactive.

When the atom loses an electron in order to become more stable,  a +ve charge has been implemented onto the ion.

When the atom gains an electron to become stable, a -ve charge has been added to the ion.

The Fluoride ion given has a -ve charge onto it. Thus in order to become stable Fluorine gains an electron. Thus option b is correct.

For more information about atom, refer to the link:

https://brainly.com/question/21850455

Answer:

created an organizational hierarchy

Explanation:

Answer:

The empirical formula is same as the molecular formula = C6H10S2O

Explanation:

we start by dividing the percentage of each of the elements by their atomic mass

Carbon = 44.4/12 = 3.7

Hydrogen = 6.21/1 = 6.21

Sulphur = 39.5/32 = 1.234375

oxygen = 9.89/16 = 0.618125

That of oxygen is smallest so we divide all by that of oxygen

C = 3.7 / 0.618125 = 6

H = 6.21/ 0.618125 = 10

S = 1.234375/ 0.618125 = 2

Automatically, oxygen is 1

So the empirical formula is;

C6H10S2O

Let’s get its molecular formula. We multiply each of the subscript by the number;

(72 + 10 + 64 + 16)n= 162

162n = 162

n = 1

So the molecular formula is same as the empirical formula

Answer:

Hydrogen in its metallic state (usually considered a nonmetal)​

Lithium.

Sodium.

Potassium.

Rubidium.

Cesium.

Francium.

Explanation:

Answer:

The list of elements that contains only metals is tin, copper and cesium.

Carbon and iodine aren't metals.

Helium isn't metal.

Neither iodine, carbon, nor argon are metals.  

(Hope this helps) Sky

Answer:

[OH] = 6.31 * 10^-7 M

Explanation:

Mathematically;

pH + pOH = 14

Mathematically;

pH = -log [H3O+]

also;

pOH = -log [OH]

From the question; [H3O+] = 1.75 * 10^-8 M

pH = -log [1.75 * 10^-8]

pH = 7.76

since pH is normally given to 1 decimal place

we can say pH = 7.8

Now;

pH + pOH = 14

pOH = 14-7.8

pOH = 6.2

now pOH = -log [OH]

[OH] = -antilog 6.2

[OH] = 6.31 * 10^-7 M

Answer:

Tornadoes form when warm, humid air collides with cold, dry air.

Explanation:

The denser cold air is pushed over the warm air, usually producing thunderstorms. The warm air rises through the colder air, causing an updraft. The updraft will begin to rotate if winds vary sharply in speed or direction.

// have a great day //

Answer:

your question says of the following but their isn't any of the following ):

Explanation:

But other than than that person right up above

Answer:

In order to take steps by humans for controlling the change in climate.

Explanation:

It is important that scientist find out the change which occurs in the climate with the passage of time by performing experiments and also repeat the experiments in order to verify their findings. Due to these experiments, scientists also find out the reasons behind of climate change which enable us to take steps in preventing the change that occurs in the environment. it is also important for scientists to be able to explain how they know that climate has changed over time in order to explain that he is not assuming or making predictions, he has to provide evidence for his statement which is only be possible through experiments.

Even though you asked for ONE WAY, I found some other good ways.

1. Thoroughly wash plastic soda bottles or milk jugs with warm, soapy water.

2. Store sealed containers in a dark, dry, and cool place.

3. If after six months you have not used the stored water, empty it from the containers and repeat steps 1 through 3 above.

Answer: The IUPAC name of [tex]CH_3C\equiv CCH_2CH_2Cl[/tex] is 5-chloro-2-pentyne

Explanation:

1. First select the longest possible carbon chain.  For the number of carbon atom, we add prefix as 'meth' for 1, 'eth' for 2, 'prop' for 3, 'but' for 4, 'pent' for 5, 'hex' for 6, 'sept' for 7, 'oct' for 8, 'nona' for 9 and 'deca' for 10.

2. The longest possible carbon chain should contain all the bonds and functional groups.

3. The numbering is done in such a way that the carbon containing the functional group or substituent gets the lowest number. Triple bond is given priority over substituent halogen.

4. The naming of alkane is done by adding the suffix -ane, alkene by adding the suffix -ene, alkyne.

Thus the IUPAC name of [tex]CH_3C\equiv CCH_2CH_2Cl[/tex] is 5-chloro-2-pentyne

Answer:

The site at which the lander would have the greatest amount of gravitational potential energy is X

Explanation:

The formula for gravitational potential is given as follows;

[tex]PE_G = m \times g \times \Delta H[/tex]

Where:

g = Acceleration due to gravity

m = Mass of the lander

ΔH = Height above surface

Landing site --- Height above surface --- Acceleration due to gravity

W                        32                                    1.6

x                          16                                    3.7

Y                         35                                    1.6

Z                         12                                     3.7

Therefore, we have;

For site W

[tex]PE_G = m \times 1.6 \times 32 = 51.2 \cdot m[/tex]

For site X

[tex]PE_G = m \times 3.7 \times 16= 59.2 \cdot m[/tex]

For site Y

[tex]PE_G = m \times 1.6 \times 35 = 56 \cdot m[/tex]

For site Z

[tex]PE_G = m \times 3.7 \times 12 = 44.4 \cdot m[/tex]

Hence the site at which the lander would have the greatest amount of gravitational potential energy is X with [tex]PE_G[/tex] = 59.2·m.

Gravitational energy is the power stored in an object due to the intensity of gravity or because the article is located vertically.

The correct answer is:

The site at which the lander would have the greatest amount of gravitational potential energy is X.

The correct explanation for site X is:

The gravitational energy can be calculated as the product of mass, gravitational field and height.

[tex]{\text{PE}_{\text G}&= \text{m}\; \times\text g\times \Delta\text H[/tex]

Where,

Given,

Landing site        Height above surface              Gravity

    W                                    32                                    1.6

    X                                     16                                     3.7

    Y                                     35                                     1.6

    Z                                     12                                      3.7

We can calculate Gravitational energy for all the sites as follows:

       [tex]{\text{PE}_{\text G}&= \text{m}\; \times\ 1.6\times 32 = 51.2 \text \; \times \text {m}[/tex]

       [tex]{\text{PE}_{\text G}&= \text{m}\; \times\ 3.7\times 16 = 59.2 \text \; \times \text {m}[/tex]

       [tex]{\text{PE}_{\text G}&= \text{m}\; \times\ 1.6\times 35 = 56 \text \; \times \text {m}[/tex]

       [tex]{\text{PE}_{\text G}&= \text{m}\; \times\ 3.7 \times 12= 44.4 \text \; \times \text {m}[/tex]

Therefore, the greatest amount of gravitational energy 59.2m is present on-site X.

To learn more about gravitational potential energy follow the given link:

https://brainly.com/question/19768887

Answer:

it burns through oxygen gas.... through the process known as combustion.... combustion is the process of burning materials in the presence of Air

Answer:

Every species is made of different elements.

Explanation:

Living organisms are classified by their species. Species refer to a group of closely related individual organisms which are callable of interbreeding with each other and exchanging genetic material.

Member of a species have similar genetic make up and often look alike, it is the lowest taxonomic rank of closely related organisms.

Members of of different species are often composed of different elements. Since individual organisms are members of a given species, we can say that every species of organisms are made up of different elements.

Answer:

Explanation:

A battery

Answer:

Ac motor is in this images

Answer:

Scientists consider human to be" carbon creatures" because carbon atoms form the backbone or foundation of pretty much the essential biological molecules floating around in our bodies (except water, of course.) All in all, scientists can consider humans to be " carbon creatures" because our skin, hair and cells are all made out of molecules that contain huge amounts of carbon.

Hope this helps! God bless!