Answer:
slump. weathering, and creep
Explanation:
Freezing and thawing cycle in geology is the process in which water gets in between soil space or rock cracks, freeze in a cold season, and then melt in a warmer season, exerting a force on the soil or rock around it. This force is due to the expansion and contraction of water when it changes from ice to liquid water.
The three geological processes slump, weathering and creep all depend on thawing and freezing cycle among other factors.
Slump: Slump is a type of geological process that occurs when coherent mass of loosely consolidated materials or a rock layer moves a short distance down a slope. The movement of a slump is characterized by sliding along a concave-upward or planar surface. Causes includes earthquake shocks, thorough wetting, freezing and thawing, undercutting, and loading of a slope.Weathering: This is a geological process that results in the gradual disintegration of rocks into smaller sizes. It is one of the most important soil formation process, and is different from erosion by the degree of movement of the soil formed. Weathering does not move the soil from its origin. Thawing and freezing cycle plays a major role in weathering by helping crack up the rocks and by also tearing the rock apart. plays a major role.Creep: This is the slow, often imperceptible downslope movement of soil or other debris. The effects of creep is often seen in the presence of physical characteristics like bent trees, tilted fences, and cracked walls. Creep is caused by multiple factors, of which heaving is likely the most important process. Heaving involves the expansion and contraction of rock fragments, and occurs during cycles of wetting and drying, as well as freezing and thawing.Answer:
It is slump, weathering and creep
Explanation:
Took the test on edg
the reaction between aluminum and iron(iii) oxide can generate temperatures approaching 3000c and is used in welding metals. In one process, 268g of Al are reacted with 501g of Fe2O3. identify the limiting reagent and calculate the theoretical mass
Answer:
- Iron (III) oxide is the limiting reactant.
- [tex]m_{Al_2O_3}=319.9gAl_2O_3[/tex]
- [tex]m_{Fe}=350.4gFe[/tex]
Explanation:
Hello,
In this case, we consider the following reaction:
[tex]2Al + Fe_2O_3 \rightarrow Al_2O_3 +2Fe[/tex]
Thus, for identifying the limiting reactant we should compute the available moles of aluminium in 268 g:
[tex]n_{Al}=268gAl*\frac{1molAl}{26.98gAl} =9.93molAl[/tex]
Next, we compute the moles of aluminium that are consumed by 501 grams of iron (III) oxide via their 2:1 molar ratio:
[tex]n_{Al}^{consumed}=501gFe_2O_3*\frac{1molFe_2O_3}{159.69gFe_2O_30}*\frac{2molAl}{1molFe_2O_3}=6.27molAl[/tex]
Thus, we notice there are less consumed moles of aluminium than available, for that reason, it is in excess; therefore, the iron (III) oxide is the limiting reactant.
Moreover, the theoretical mass of aluminium oxide is:
[tex]m_{Al_2O_3}=6.27molAl*\frac{1molAl_2O_3}{2molAl} *\frac{101.96gAl_2O_3}{1molAl_2O_3} =319.9gAl_2O_3[/tex]
And the theoretical mass of iron is:
[tex]m_{Fe}=6.27molAl*\frac{2molFe}{2molAl} *\frac{55.845 gFe}{1molFe} =350.4gFe[/tex]
Best regards.
A semipermeable sac containing 4% NaCl, 9% glucose, and 10% albumin is suspended in a solution with the following composition: 10% NaCl, 10% glucose, and 40% albumin. Assume that the sac is permeable to all substances except albumin. State whether each of the following will (a) move into the sac, (b) move out of the sac, or (c) not move.
glucose: a. moves into sac
water: b. moves out of sac
albumin: c; does not move
NaCl: a; moves into sac
Answer:
Glucose: (a) moves into sac
Water: (b) moves out of sac
Albumin: (c) does not move
NaCl: (a) moves into sac
Explanation:
A semi-permeable membrane is a membrane that allow certain molecules or ions to pass through by diffusion.
Diffusion is the movement of molecules from a region of higher concentration to a region of lower concentration until equilibrium is attained. A special form of diffusion known as osmosis transports water molecules across a semi-permeable membrane.
Osmosis is the movement of water molecules from a region lower solute concentration (high water molecules concentration) to a region of higher solute concentration (low water molecules concentration) until equilibrium is attained.
From the above definitions and the given data;
Glucose concentration is higher in solution outside the sac, thus, glucose molecules will move into the sac.
Water molecules are higher in the sac as a result of the lower concentration of solutes, therefore, water molecules will move out of the sac into the solution outside.
Since the sac is impermeable to albumin, it does not move.
NaCl concentration is lower in the sac, therefore, it will move ro the solution outside into the sac.
Glucose will move into the sac, water will move out of the sac, albumin will neither move in nor out, and NaCl will move into the sac.
The molecules of each of the substances will move by diffusion from the region of higher concentration to the region of lower concentration of each substance as long as there is a permeable membrane. Water, on the other hand, will move by osmosis from the region of high to low water potential through a permeable membrane. Regions with higher concentrations of substances usually have low water potentials and vice versa.Thus, both glucose and NaCl molecules will diffuse from the solution into the sac, and water molecules will move from the sac into the surrounding solution. Since the sac is not permeable to albumin, then the movement in or out is inhibited.
More on osmosis and diffusion can be found here: https://brainly.com/question/19867503?referrer=searchResults
How many molecules of water are in 5 moles
Answer:
3.011x10^24 molecules
Explanation:
1 mole=6.022x10^23 molecules
5 moles*6.022x10^23 molecules/mole=3.011x10^24 molecules
Alkyl derivatives of mercury are highly toxic and can cause mercury poisoning in humans. Dimethylmercury is one of the strongest known neurotoxins. Although it is said to have a slightly sweet smell, inhaling enough to discern this would be hazardous.
Give the empirical formula of dimethylmercury.
Answer:
The empirical formula of dimethylmercury is C2H6Hg
Explanation:
Dimethylmercury, as it says in the name, presents not only the mercury metal in its structure (Hg) but also two radical groups called methyl, which is why its name begins with the prefix DI, referring to the fact that there are two methyl.
Enter your answer in the provided box. A sample of an unknown gas effuses in 14.5 min. An equal volume of H2 in the same apparatus under the same conditions effuses in 2.42 min. What is the molar mass of the unknown gas
Answer:
Molar mass = 71.76 g/mol
Explanation:
The relationship between molar mass and rate of effusion is given as;
Vh / Vu = √ (Mu / Mh)
The rate of effusion of a gas is inversely proportional to the square root of the mass of its particles.
Rate = volume / time (Assuming Volume = 1)
Vh = Rate of effusion of Hydrogen = 1 / 2.42
Vu = Rate of effusion of unknown gas = 1 / 14.5
Mh = Molar mass of hydrogen = 2
Mu = Molar mass of unknown gas = x
Substituting into the formular, we have;
(1 / 2.42) / (1 / 14.5) = √ ( x / 2)
5.99 = √ ( x / 2)
35.88 = x / 2
x = 71.76
A 1.00 liter solution contains 0.42 moles nitrous acid and 0.32 moles sodium nitrite .
If 0.16 moles of nitric acid are added to this system, indicate whether the following statements are true or false.
(Assume that the volume does not change upon the addition of nitric acid.)
A. The number of moles of HNO2 will decrease.
B. The number of moles of NO2- will remain the same.
C. The equilibrium concentration of H3O+ will increase.
D. The pH will decrease.
E. The ratio of [HNO2] / [NO2-] will increase
Answer:
E. The ratio of [HNO2] / [NO2-] will increase
D. The pH will decrease.
Explanation:
Nitrous acid ( HNO₂ ) is a weak acid and NaNO₂ is its salt . The mixture makes a buffer solution .
pH = pka + log [ salt] / [ Acid ]
= 3.4 + log .32 / .42
= 3.4 - .118
= 3.282 .
Now .16 moles of nitric acid is added which will react with salt to form acid
HNO₃ + NaNO₂ = HNO₂ + NaNO₃
concentration of nitrous acid will be increased and concentration of sodium nitrite ( salt will decrease )
concentration of nitrous acid = .42 + .16 = .58 M
concentration of salt = .32 - .16 = .16 M
ratio of [HNO₂ ] / NO₂⁻]
= .42 / .32 = 1.3125
ratio of [HNO₂ ] / NO₂⁻] after reaction
= .42 + .16 / .32 - .16
= 58 / 16
= 3.625 .
ratio will increase.
Option E is the answer .
pH after reaction
= 3.4 + log .16 / .58
= 2.84
pH will decrease.
Which table represents a relation that is not function?
Please
Answer:
1
Explanation:
Any relation with a repeated input value is not a function.
Table 1 has the input value 2 listed twice, so does not represent a function.
A laser is used in eye surgery to weld a detached retina back into place. The wavelength of the laser beam is 503 nm, while the power is 1.4 W. During surgery, the laser beam is turned on for 0.070 s. During this time, how many photons are emitted by the laser?
Answer:
Number of proton emmitted by laser=[tex]2.48*10^17proton[/tex]
Explanation:
Energy is the ability to cause change; power is directly proportional to energy and its the rate energy is utilized.
Power=energy/time.
First we need to calculate the total energy used which is equal to the total power utilized.
E(total)= P( total) = 1.4W × 0.070 s =[tex]0.098J[/tex]
CHECK THE ATTACHMENT FOR THE REMAINING DETAILED CALCULATION
Wax melts when it is heated which most likely describes what is true of the result of this reaction
Answer:
Was is a hydrocarbon therefore when heated some co2 escapes but later solidifies
Explanation:
Hope it helps
You add 5.7 g of iron to 25.20ml of water and observe that the volume of the iron and water together is 25.92ml calculate thw density of the iron
Answer:
7.92gml-1
Explanation:
water=25.20ml
water+iron=25.92ml
iron=5.7g
P=mass/volume (formula of density)
mass=5.7g
volume=25.92-25.20
=0.72ml
p=5.7/0.72
=7.92gml-1
Given:
Initial volume of water = 25.20mL
Volume of water after iron is added = 25.92mL
Mass of iron = 5.7g
So, the volume of iron = 25.92mL - 25.20mL = 0.72mL
∴ Density of iron will be
Density = Mass/Volume
Density = 5.7g / 0.72mL
Density = 7.91 g/mL
What is density in short answer?
The density of a substance is the relationship between its mass and how much space it takes up. Density equals the mass of the substance divided by its volume, D = m/v.
What is the SI unit of density?Though SI unit of density is kg/m³ solids, g/ml for liquids and g/L for gases.
Learn more about Density here
https://brainly.com/question/6838128
#SPJ2
Which activities can help conserve water when taking showers
Answer:
If you're ever shaving in the bathroom, turn the water off.
Explanation:
If you do this, you can save at least 3-4 pounds of water.
Answer:
The following activities can help conserve water while taking showers:
1) Lower shower time
2) Don't leave shower running.
3) Check for leaks
A 950.0 mL solution of potassium permanganate was made by dissolving 45.0 g KMnO4 in 750.0 mL of water. Assume water has a density of 1.00 g/mL. (Molar Mass for H = 1 , O = 16 , K= 39 , Mn= 55 ) The mole fraction of the solute =
Answer:
The correct answer is 6.67×10⁻³.
Explanation:
Based on the given question, the amount of solute (KmNO4) is 45 grams. The molecular weight of KmNO4 is 158 gram per mole. The moles of solute can be determined by using the formula,
n = mass/molecular weight
n = 45/158 = 0.28
The amount of solvent (water) given is 750 milliliters, and the density of water is 1 gm. per ml, 18 gram per mole is the molecular weight of water. So, the moles of solvent will be,
n = 750/18 = 41.7
The formula for calculating mole fraction is,
Mole fraction = mole of solute / (mass of solute + mole of solvent)
The mole fraction of solute can be determined by putting the values in the above mentioned formula,
Mole fraction of KmNO4 = 0.28/(0.28+41.7)
= 0.28/41.98
= 6.67 × 10⁻³ or 7 × 10⁻³.
Which of the compounds below are amines?
1. H4C-NH-CH3
2. H3C-NH-C-CH3
H2C-CH3
1 +
H3C-CH2-N-CH3
CH3
N
3. H
4.
Answer:
1. H4C-NH-CH3
2. H3C-NH-C-CH3
H2C-CH3
1 +
H3C-CH2-N-CH3
CH3
N
3. H
4.
.
.
.
.
.
.
Hydrogen bonds can be found between molecules of which substance? NH3 H2 HI CH4
Answer:
All except ch4
Explanation:
NH3 N H 3 and HF can form hydrogen bonds as they have a hydrogen atom bonded to fluorine and nitrogen atoms.
Hydrogen bonds are formed between hydrogen and a highly electronegative atom such as oxygen, halogens etc. Among the given compounds HI form hydrogen bond.
What is hydrogen bond?Hydrogen bond a strong bond type formed between hydrogen and an electronegative atom. Water, hydrogen halides, hydrogen sulphide etc are formed by hydrogen bonds.
Hydrogen is an electropositive atom and will easily lose an electron to a electronegative atom. Thus hydrogen bonds with atoms by sharing electrons each other where, the shared pair of electrons are attractively pulled to the electronegative atom.
Therefore, all the hydrogen bonded compounds are polar in nature. Hydrogen bonds are strong bonds and it can be seen in proteins, DNA, and in other biomolecules.
HI or hydrogen iodide forms hydrogen bond because iodine is comparatively electronegative.
To find more on hydrogen bonds, refer here:
https://brainly.com/question/15099999
#SPJ2
What is the oxidation number of nitrogen in N20?
00
O+1
O +2
O +4
A thermometer is placed in water in order to measure the water’s temperature. What would cause the liquid in the thermometer to rise? The molecules in the water move closer together. The molecules in the thermometer’s liquid spread apart. The kinetic energy of the water molecules decreases. The kinetic energy of the thermometer’s liquid molecules decreases.
Answer:
The molecules in the thermometer’s liquid spread apart
Explanation:
The molecules in the thermometer’s liquid spread apart.
What is thermometer?A thermometer is a device that measures temperature or a temperature gradient.
What causes the liquid in the thermometer to rise?The liquid (water) in thermometer exhibits convex meniscus, as a result of this meniscus, the water molecules in the thermometer will spread apart when temperature is measured.
Learn more about thermometer here: https://brainly.com/question/21720093
4-Nitrophenol, NO2C6H4OH (pKa 7.15), is only slightly soluble in water, but its sodium salt, NO2C6H4O-Na+, is quite soluble in water. Describe the solubility of 4-nitrophenol in solutions of sodium hydroxide, sodium bicarbonate (NaHCO3), and sodium carbonate (Na2CO3). The pKa values for the conjugate acids of sodium hydroxide, sodium bicarbonate (NaHCO3), and sodium carbonate (Na2CO3) are 15.7, 6.36, and 10.33, respectively. Aqueous NaOH: _________ Aqueous NaHCO3: _________ Aqueous Na2CO3: _________
Answer:
Aqueous NaOH: soluble
Aqueous NaHCO₃: insoluble
Aqueous Na₂CO₃: soluble
Explanation:
The organic acid is insoluble. Its salt (ionic) is soluble.
The important principle is:
If you have two acids in a flask, the stronger acid (smaller pKₐ) will protonate the weaker one. The stronger acid will become ionic and therefore more soluble.
1. In NaOH
Let's write the formula for 4-nitrobenzoic acid as HA.
The equation for the reaction is
HA + OH⁻ ⇌ A⁻ + H₂O
pKₐ: 7.15 15.7
HA is the stronger acid. It will protonate the hydroxide ion and be converted to the soluble 4-nitrobenzoate ion.
4-Nitrophenol is soluble in NaOH.
2. In NaHCO₃
HA + HCO₃⁻ ⇌ A⁻ + H₂CO₃
pKₐ: 7.15 6.36
HCO₃⁻ is the stronger acid. It will protonate 4-nitrophenol.
4-Nitrobenzoic acid is insoluble in NaHCO₃.
3. In Na₂CO₃
HA + CO₃²⁻ ⇌ A⁻ + H₂CO₃
pKₐ: 7.15 10.33
HA is the stronger acid. It will protonate the carbonate ion.
4-Nitrophenol is soluble in Na₂CO₃.
Predict the order of elution if you were to attempt to separate using column chromatography on silica gel and with a gradient eluent system starting with petroleum ether and slowly increasing MTBE % over time.
Answer:
Follows this order: B=> A => C.
Explanation:
NB: kindly check the attachment for the diagram of compounds A, B and C.
Elution is a very important concept in chromatography separation techniques. It deals with the use of eluent in the removal of an adsobate from an adsorbent. The principle behind Elution is just about how polar the solvent is.
So, in this question Compound B will go with the Elution first because of its polarity. Compound B has lesser polarity as compared to Compounds A and B.
Compound A will then elutes second because of its polarity too as resonance increases its polarity.
Last, compound C elutes because it has the highest polarity which is caused by electronegative atoms.
Indicate whether each of the following indicates that a physical or chemical change has taken place when a piece of magnesium metal is studied: (a) Can be cut into tiny pieces (b) Fizzling occurs when placed water (c) Light is emitted when burned (d) Turns to ash
Answer:
a) Can be cut into tiny pieces - Physical Change
b) Fizzling occurs when placed water -Chemical Change
c) Light is emitted when burned -Chemical Change
d) Turns to ash -Chemical Change
Explanation:
A balanced equation has
Answer:
A balanced equation is an equation for a chemical reaction in which the number of atoms for each element in the reaction and the total charge is the same for both the reactants and the products.In other words, the mass and the charge are balanced on both sides of the reaction.
Explanation:
A patient arrives in the emergency room with a burn caused by steam. Calculate the heat that is released when 14.5 g of steam at 100. ∘C hits the skin, condenses, and cools to body temperature of 37.0 ∘C. (For water, 540 cal (2260 J) is needed to convert 1 g of water to vapor at 100 ∘C.)
Answer:36,592.1J or 36.5921KJ
Explanation:
first convert to steam
14.5 g of steam at 100∘C
To covert to water vaporor steam, becomes
14.5g x 2260 J of energy per gram of steam
=32,770J
Also, Quantity of heat released when the temperature is reduced from 100 ∘C to 37 ∘C, we will use the formulae,
q= m C ΔT
Where specific heat capacity of water C = 4.184 J/g.C
mass= 14.5g
Change in temperature= 100∘C-37∘C= 63∘C
we will now have
= 14.5 g x 4.184 J/g.Cx ( 100 - 37) C = 3,822.084 J= 3822.1J
Therefore total energy released = 32,770 J + 3822.1 J = 36,592.1J
OR converting to KJ becomes=36,592.1/1000=36.592KJ
Magnesium and nitrogen react in a combination reaction to produce magnesium nitride:
3 Mg + N2 → Mg3N2
In a particular experiment, a 8.33-g sample of N2 reacts completely. The mass of Mg consumed is ________ g.
Answer:
21.7 g
Explanation:
Step 1: Write the balanced equation
3 Mg + N₂ → Mg₃N₂
Step 2: Calculate the moles corresponding to 8.33 g of nitrogen
The molar mass of N₂ is 28.01 g/mol.
[tex]8.33 g \times \frac{1mol}{28.01g} =0.297mol[/tex]
Step 3: Calculate the moles of magnesium that reacts with 0.297 moles of nitrogen
The molar ratio of Mg to N₂ is 3:1. The reacting moles of Mg are 3/1 × 0.297 mol = 0.891 mol
Step 4: Calculate the mass corresponding to 0.891 moles of magnesium
The molar mass of Mg is 24.31 g/mol.
[tex]0.891 mol \times \frac{24.31g}{mol} = 21.7 g[/tex]
Answer:
[tex]m_{Mg}=21.7 g Mg[/tex]
Explanation:
Hello,
In this case, considering the given reaction, we are able to compute the mass of magnesium that is consumed by considering its molar mass (24.31 g/mol), the molar mass of diatomic nitrogen (28.02 g/mol), the initial mass of nitrogen (8.33 g) and the 3:1 molar ratio of magnesium to nitrogen in the reaction.
Hence we compute it by applying the shown below stoichiometric procedure:
[tex]m_{Mg}=8.33 gN_2*\frac{1molN_2}{28.02gN_2} *\frac{3molMg}{1molN_2} *\frac{24.31gMg}{1molMg} \\\\m_{Mg}=21.7 g Mg[/tex]
Regards.
Given the equation 2KCIO3(s)=2KCI(s) + 3O2(g). A 3.00-g sample of KCIO3 is decomposed and the oxygen at 24 degrees C and 0.982 atm is collected. What volume of oxygen gas will be collected assuming 100% yield?
Answer:
0.912 L or 912 mL
Explanation:
M(KClO3) = 122.55 g/mol
3.00 g KClO3 * 1 mol/122.55 g = 3.00/122.55 mol =0.02449 mol
2KCIO3(s)=2KCI(s) + 3O2(g)
from reaction 2 mol 3 mol
given 0.02449 mol x
x = 0.02449*3/2 =0.03673 mol O2
T = 24 + 273.15 = 297.15 K
PV = nRT
V= nRT/P = (0.03673 mol*0.082057 L*atm/K*mol*297.15 K)/0.982 atm =
= 0.912 L or 912 mL
1- A volumen constante un gas ejerce una presión de 880 mmHg a 20º Celsius dentro de una olla a presión ¿Qué temperatura habrá si el marcador de presión muestra un valor de 1050 mmHg?
Answer:
In this problem the correct thing would be to use the ideal gas equation.
Explanation:
Well in this exercise we will use the following equation:
(P x V) / T = (p x v) / t
On the right side of the equation we will find the initial values, that is, the values with which the reaction begins and in general they are always the first to write in the problems.
Instead on the left side of the equation, the letters that are in lowercase are the final values, that is to say at the end of the reaction that the values of pressure, temperature and volume are reached.
P is pressing, just like p, T and t are temperature, and V and v are volume.
We use this equation so we consider the behavior of said gas to be an IDEAL gas, a constant volume.
That is why the given pressures require an atmosphere to pass, which is another unit used to press the pressure ... Much needed in this equation! An atmosphere is equivalent to 760 millimeters of mercury ...
Then the final and initial pressures would be:
initial pressure: 1.15 atm
final pressure: 1.38 atm
In this way you already have the values to be able to solve in the equation your unknown that would be the final temperature:
Considering that the volume is constant, we cancel it from the equation, 1.15 atm would be in the value of P and 1.38 in the value of p ... In this way it considers that 20 degrees Celsius is the initial temperature or ses T, we would only have to clear the t.
Ni
Express your answer in condensed form in the order of orbital filling as a string without blank space between orbitals. For example, [He]2s22p2 should be entered as [He]2s^22p^2.
Answer:
[Ar]3d^84s^2
Explanation:
From the question given, we are asked to write the condensed form of electronic configuration of nickel, Ni.
To do this, we simply write the symbol of the noble gas element before Ni in a squared bracket followed by the remaining electrons to make up the atomic number of Ni.
This is illustrated below:
The atomic number of Ni is 28.
The noble gas before Ni is Argon, Ar.
Therefore, the condensed electronic configuration of Ni is written as:
Ni(28) => [Ar]3d^84s^2
Answer:
[Ar] 4s^23d^8
Explanation:
4 molecules of glucose has how many carbon hydrogen and oxygen
Answer:
24 carbons
48 hydrogens
24 oxygen
Explanation:
What is the number of valence electrons in a nitrogen atom in the ground state
Answer: 5
Explanation:
It just is
Answer:
5
Explanation:
Bc valence electron means last # in the electron configuration
Classify the following as Arrhenius, Bronsted-Lowry, or Lewis acid-base reactions. A reaction may fit all, two, one, or none of the categories:I. Cu2+ + 4 Cl− CuCl42−II. Al(OH)3 + 3HNO3 Al3+ + 3H2O + 3 NO3−III. N2 + 3 H2 2NH3IV. CN− + H2O HCN + OH
Answer:
I. Lewis acid-base reaction
II. Arrhenius, Brønsted-Lowry, and Lewis' acid-base reaction
III. Brønsted-Lowry and Lewis'acid-base reaction
IV. Lewis acid-base reaction
Explanation:
According to Arrhenius, an acid is a substance that dissolves in water to produce H+ ions, and a base is a substance that dissolves in water to produce hydroxide (OH−) ions.
In the reaction below, AH is an avid, BOH is a base reacting together to form a salt(A-B+) and water only.
AH + BOH ---> A-B+ + H2O
According to Brønsted-Lowry definition, an acid is any substance that can donate a proton, and a base is any substance that can accept a proton.
In the reaction below, AH is an acid while B is a base, reacting together to form an acid-base conjugate pair.
AH + B <-----> BH+ + A-
According to Lewis' definition, an acid is a species that accepts an electron pair while a base donates an electron pair resulting in a coordinate covalently bonded compound, also known as an adduct. In the reaction below, A+ is an acid, B- is a base, reacting together to form product A-B.
A+ + B- ------> A-B
Considering the above definitions;
I. Cu²+ + 4 Cl− ---> CuCl4²− is a Lewis acid-base reaction because it involves electron sharing only.
II. Al(OH)3 + 3HNO3 ---> Al3+ + 3H2O + 3 NO3− is an Arrhenius, Brønsted-Lowry, and a Lewis acid-base reaction because it involves protons, electrons and hydroxide ions.
III. N2 + 3 H2 ---> 2NH3 is a Lewis acid-base reaction because it involves sharing of electrons only.
IV. CN− + H2O ---> HCN + OH is both a Lewis and Brønsted-Lowry acid-base reaction because both protons and electrons sharing is involved.
In a Bronsted-Lowry acid-base reaction reaction, an acid donates protons which is accepted by the base.
The following are useful definitions of acids and bases;
An Arrhenius acid produces hydrogen ion as its only positive ion in solution while an Arrhenius base produces hydroxide ion as its only negative ion in solution.A Bronsted-Lowry acid donates hydrogen ions while a Bronsted-Lowry base accepts hydrogen ionsA Lewis acid accepts lone pairs of electrons while a Lewis base donates lone pairs of electrons.Based on these, we can now classify the reactions accordingly;
Cu^2+ + 4Cl− ------>[CuCl4[^2− Lewis acid-base reaction Al(OH)3 + 3HNO3 -----> Al^3+ + 3H2O + 3NO3^− Arrhenius acid-base reactionN2 + 3H2 ----> 2NH3 NoneCN− + H2O ------> HCN + OH^- Bronsted-Lowry acid-base reactionLearn more: https://brainly.com/question/9352088
When nitrogen dioxide (NO2) gas from car exhaust combines with water in the air, it forms nitrogen oxide and nitric acid (HNO3), which causes acid rain, and nitrogen oxide. Balanced eqjation:
(NO); 3NO2(g) + H20(l) --> 2HNO3(aq) + NO(g).
A) How many molecules of NO2 are needed to react with 0.250 mol of H2O?
B) How many grams of HNO3 are produced when 60.0 g of NO2 completly reacts?
C) How many grams of HNO3 can be produced if 225 g of NO2 is mixed with 55.2 g of H2O?
Answer:
A. 0.75 moles NO2 are required
B. 82.2 gnof HNO3 are produced
C. 205.3 g of HNO3 are produced
Explanation:
Check attachment below for explanation and calculations
Explain why both square planar and tetrahedral complexes have coordination number=4, and yet square planar complexes can never be chiral while tetrahedral complexes can.
Answer:
The coordination number is 4.
Explanation:
Square planar clusters can be either cis or trans, as they form 180 and 90-degree bond angles. Therefore, a pair of ions may be adjacent (cis) to one another and immediately across (trans) from one another. A square planar molecule could never be simultaneously cis and trans, so because several coordinators are 4. Since linear complexes have only an angle of a bond of 180 degrees, they can not have cis or trans-isomers. In the coordination complex, there is only yet another way possible of bonding the two binding sites to the steel.