What's wrong with these codes in code HS Karel challenges(7.1.2. Racing Karel) Codes: //Below is the program that have Karel move around the race track 8 times, and end in his starting location. Everytime Karel hits a corner, he will put a ball down. At the end there should be 8 balls on each corner. function start(){ for(var i = 0; i < 5; i++){ ballSet(); wallRun(); turnLeft(); } function wallRun(){ while(frontIsClear()){ move(); } } function ballSet(){ putBall(); } }

Answers

Answer 1

Answer:

The program only runs 5 five since the for loop statement is limited to loop only five times.

Explanation:

In programming, a for-loop statement is used to repeat a collection of events a definite number of times. The number of loops is specified and compared with a variable to execute a block of code.

The for-loop statement in the code above declares and initializes a variable "i" to zero, runs the block of code, and increments by one if it is less than 5.

To make it run eight times, the value five should be changed to 8 instead.

Answer 2

Answer: you have to change the 5 to 8 since its telling you to do it 8 times

Explanation: for(var i = 0; i < 5; i++) should be for(var i = 0; i < 8; i++)


Related Questions

function of printer and speaker​

Answers

Nepal .... Free Fire

What are Layers in computer class 7. no scams please​

Answers

Answer:

It means and organisation programming into separate functional components that interact in some sequential and hierarchical way, with each layer usually having an interface only to the layer above it and the layer below it.

pls answer i need to turn it in today!!

In computing flowcharts how are decisions represented?

What is the command used most for decisions?

Answers

Answer:

See Explanation

Explanation:

How decisions are represented?

In flowcharts, decisions are represented using diamond shapes (see attachment)

Decisions could be conditional statement or repetition operations which may have the form of loops or iterations.

Either of theses are represented using the diamond shapes.

Take for instance:

To check if a is greater than b... Simply write if a > b i the diamond box

Command used for most decisions

Most decisions are conditional statements; hence, the if command is often used for decisions.

5. What is the significance of the EXIT DO and EXIT FOR statements?​

Answers

Answer:

Exit Do transfers control to the statement following the Loop statement. When used within nested Do...Loop statements, EXIT DO transfers control to the loop that is one nested level above the loop where it occurs.

When used within nested For loops, EXIT FOR transfers control to the loop that is one nested level above the loop where it occurs.

Explanation:

I HOPE it can help....

Para que se utilizan las siguientes plataformas: Matlab, Labview, VisualBasic, Mplab, Micropic, PicCompiller

Answers

Answer:

MATLAB (abreviatura de MATrix LABoratory, «laboratorio de matrices») es un sistema de cómputo numérico que ofrece un entorno de desarrollo integrado (IDE) con un lenguaje de programación propio (lenguaje M). Está disponible para las plataformas Unix, Windows, macOS y GNU/Linux.

Entre sus prestaciones básicas se hallan la manipulación de matrices, la representación de datos y funciones, la implementación de algoritmos, la creación de interfaces de usuario (GUI) y la comunicación con programas en otros lenguajes y con otros dispositivos hardware.

LABVIEW (acrónimo de Laboratory Virtual Instrument Engineering Workbench) es una plataforma y entorno de desarrollo para diseñar sistemas, con un lenguaje de programación visual gráfico pensado para sistemas hardware y software de pruebas, control y diseño, simulado o real y embebido.

Visual Basic (VB) es un lenguaje de programación dirigido por eventos, desarrollado por Alan Cooper para Microsoft. Este lenguaje de programación es un dialecto de BASIC, con importantes agregados. Su primera versión fue presentada en 1991, con la intención de simplificar la programación utilizando un ambiente de desarrollo.

MPLAB es un editor IDE gratuito, destinado a productos de la marca Microchip. Este editor es modular, permite seleccionar los distintos microcontroladores soportados, además de permitir la grabación de estos circuitos integrados directamente al programador.

MICROPICUn PIC es un circuito integrado programable (Programmable Integrated Circuited), el cual contiene todos los componentes para poder realizar y controlar una tarea, por lo que se denomina como un microcontrolador. Los PIC son una familia de microcontroladores tipo RISC fabricados por Microchip Technology Inc. y derivados del PIC1650, originalmente desarrollado por la división de microelectrónica de General Instrument.

PICCOMPILER

El Portable C Compiler o Compilador de C Portable (también conocido como pcc o, algunas veces, como pccm - máquina de compilador de C portable) fue uno de los primeros compiladores para el lenguaje de programación C escrito por Stephen C. Johnson de los Laboratorios Bell a mediados de los 70, basado, en parte, en las ideas de un trabajo previo de Alan Snyder en 1973.

Explanation:

MATLAB (abreviatura de MATrix LABoratory, «laboratorio de matrices») es un sistema de cómputo numérico que ofrece un entorno de desarrollo integrado (IDE) con un lenguaje de programación propio (lenguaje M). Está disponible para las plataformas Unix, Windows, macOS y GNU/Linux.

Entre sus prestaciones básicas se hallan la manipulación de matrices, la representación de datos y funciones, la implementación de algoritmos, la creación de interfaces de usuario (GUI) y la comunicación con programas en otros lenguajes y con otros dispositivos hardware.

LABVIEW (acrónimo de Laboratory Virtual Instrument Engineering Workbench) es una plataforma y entorno de desarrollo para diseñar sistemas, con un lenguaje de programación visual gráfico pensado para sistemas hardware y software de pruebas, control y diseño, simulado o real y embebido.

Visual Basic (VB) es un lenguaje de programación dirigido por eventos, desarrollado por Alan Cooper para Microsoft. Este lenguaje de programación es un dialecto de BASIC, con importantes agregados. Su primera versión fue presentada en 1991, con la intención de simplificar la programación utilizando un ambiente de desarrollo.

MPLAB es un editor IDE gratuito, destinado a productos de la marca Microchip. Este editor es modular, permite seleccionar los distintos microcontroladores soportados, además de permitir la grabación de estos circuitos integrados directamente al programador.

MICROPICUn PIC es un circuito integrado programable (Programmable Integrated Circuited), el cual contiene todos los componentes para poder realizar y controlar una tarea, por lo que se denomina como un microcontrolador. Los PIC son una familia de microcontroladores tipo RISC fabricados por Microchip Technology Inc. y derivados del PIC1650, originalmente desarrollado por la división de microelectrónica de General Instrument.

PICCOMPILER

El Portable C Compiler o Compilador de C Portable (también conocido como pcc o, algunas veces, como pccm - máquina de compilador de C portable) fue uno de los primeros compiladores para el lenguaje de programación C escrito por Stephen C. Johnson de los Laboratorios Bell a mediados de los 70, basado, en parte, en las ideas de un trabajo previo de Alan Snyder en 1973.

What percentage of teens say they have witnessed cyberbullying?

50

95

70

35

Answers

A Majority of Teens Have Experienced Some Form of Cyberbullying. 59% of U.S. teens have been bullied or harassed online, and a similar share says it's a major problem for people their age

254 × (×) igual 20×()682883993

What was the biggest challenge you faced in getting to where you are today and how did you overcome it? Peer counseling

Answers

The biggest challenge I still am faced with today is loosing weight, it can be different for everyone but that is mine. I overcomed it by eating a lot better and not so much junk food.

I need help writing the algorithm I know how to do the flow chart for the first one but I’m not sure if the second question is a for loop

Answers

Answer:

The algorithm is as follows:

(a) Sales and commission

1. Start

2. Input Sales

3. Commission = 0.30 * Sales

3. If sales >= 4000.00 then

3.1   Commission = 0.60 * Sales

4. End If

5. Print Commission

6. Stop

(b) Amount of Rainfall

1. Start

2. Days = 1

3. Total = 0.0

4. While Days <= 31

4.1. Input Rainfall

4.2. Total = Total + Rainfall

4.3. Days = Days + 1

4.4. End If

5. Print Total

6. Stop

See attachment for flowchart

Explanation:

(a) Sales and commission

This begins the algorithm

1. Start

This gets sales from the user

2. Input Sales

This calculates the commission based on 30% (i.e. for sales < 4000)

3. Commission = 0.30 * Sales

This checks if sales is greater than or equal to 4000

3. If sales >= 4000.00 then

This calculates the commission as 60% of Sales

3.1   Commission = 0.60 * Sales

This ends the if condition

4. End If

This prints the calculated commission

5. Print Commission

This ends the algorithm

6. Stop

(b) Amount of Rainfall

This begins the algorithm

1. Start

This initializes the number of days to 1

2. Days = 1

This initializes total rainfall to 0

3. Total = 0.0

The following while loop is repeated until day 31st

4. While Days <= 31

This gets input for Rainfall from the user

4.1. Input Rainfall

This calculates the total rainfall

4.2. Total = Total + Rainfall

This increments the number of days

4.3. Days = Days + 1

This ends the if statement

4.4. End If

This prints the total rainfall

5. Print Total

This ends the algorithm

6. Stop

Which of the following is an example of a prediction:

Answers

Answer:

You need to include the examples so we can answer :)

Explanation:

What is one thing that makes a website a good website?

Answers

Make sure that your website's name and domain reflect the topic of the site. Bottom Line: Most high-traffic websites have a clear purpose and operate in a particular niche. Make sure that the purpose of your website is clear to visitors and try to stay on topic as much as possible.

Could someone please help?​

Answers

Answer:

it looks difficult

Explanation:

you can devotingly solve it

Which area of government regulations do the Fair Credit and Reporting Act
(FCRA) and the Gramm-Leach-Bliley Act (GLB) relate to?
A. Advertising
B. Health and safety
C. Privacy and security
D. Employment and labor

Answers

Answer:   C. Privacy and security

Explanation:  100% correct

In a series circuit, resistance is?

Answers

Answer:

In a series circuit, the total resistance is equal to the sum of all resistances.

Explanation:

The same current passes through each resistor, so each resistor does its job as you would expect.

For Example:

a series circuit has a 2 Ω (ohm) resistor, a 5 Ω resistor, and a 7 Ω resistor. The total resistance of the circuit is 2 + 5 + 7 = 14 Ω.

3.1.2 Quiz: What Can Information Technology Do for You? Question 8 of 10 What is one reason why a business may want to move entirely online? A. To double the number of employees B. To avoid paying state and local taxes C. To focus on a global market D. To limit the number of items in its inventory​

Answers

Answer:

C. To focus on a global market

Explanation:

Information technology can be defined as a set of components or computer systems, which is used to collect, store, and process data, as well as dissemination of information, knowledge, and distribution of digital products.

An information technology interacts with its environment by receiving data in its raw forms and information in a usable format.

Generally, it is an integral part of human life because individuals, organizations, and institutions rely on information technology and systems in order to perform their duties, functions or tasks and to manage their operations effectively. For example, all organizations make use of information technology and systems for supply chain management, process financial accounts, manage their workforce, and as a marketing channels to reach their customers or potential customers.

Additionally, an information system or technology comprises of five (5) main components;

1. Hardware.

2. Software.

3. Database.

4. Human resources.

5. Telecommunications.

Hence, information technology or system relies on the data it receives from its environment, processes this data into formats that are usable by the end users.

One reason why a business may want to move entirely online is to focus on a global market through the use of social media platforms and networks to reach out to customers in various geographical location.

What is Binary



A part of a computer


A base 2 number system


A computer program


Software for a computer

Answers

The answer to your question would be B. A base 2 number system.

If someone said to you, “Pseudocode is a waste of time! It’s just more work because you end up writing the same program twice,” how would you explain the benefits of pseudocode?

Answers

Answer:

It allows the designer to focus on main logic without being distracted by programming languages syntax.

* Since it is language independent, it can be translated to any computer language code.

* It allows designer to express logic in plain natural language.

* It is easier to write actual code using pseudocode.

* Unlike algorithms, pseudocodes are concise so pseudocodes are more readable and easier to modify.

Explanation:

The shapes of AND, OR, and NOR gates have something in common. What is it and why do you think they share that feature?

Answers

There're all conjunctions.

You can seperate them in sentences after a comma for a run-on sentence.

What is block palette

Answers

The block palette is an area of the graphical user interface located between the stage, sprite pane and scripting area.

Larry has created a web page using HTML 4.01. He hasn’t included the declaration in the file. When he opens the page in a browser, Larry sees a page load error. Why does Larry need to use the declaration in an HTML file?
A.
to define the HTML version in which the page is written
B.
to define the web language in which the page is written
C.
to tell the browser what the content is
D.
to check whether the code is error-free

Answers

Answer:

To define the html version in which the page is written.

Jessica has two pens, one red pen and a black pen. The red pen measures 5 inches while the
black one measures 15.24 cenfimefers.
A) How long is Jessica's red pen in centimeters
B) How long is Jessica's black pen in inches
C) which pen is longer
2) John rode 2 kilometers on his bike. His sister Sally rode 3000 meters on her bike. Who rode the
fasthest and
A) How much did John ride in meters
B) How much did Sally ride in kilometers 2012
C) Who rode the farthesten
D) How much farther did they ride (in kilometers)?
E) How much farther did they ride (in meters)?
3) Faye drew two line segments. The first line segment measures 7 inches while the second measures
10 inches.
A) What is the length of the first line segment in centimeters
B) What is the length of the second line segment in centimeters?



branleast ka sakin pag sinagotan moto promise

pag hindi maayos yan report ka sakin​

Answers

Answer:

1.

A) 12.7

B) 6

C) The black pen

2.

A) 2000

B) 3

C) Sally

D) They rode 1 kilometers farther

E) They rode 1000 meters farther

3.

A) 17.78

B) 25.4

Explanation:

A=5×2.54=12.7cmB.=15.24/2.54=6inchC.black pencilsalli rode a bike faster thanjohn.

A.john ride bike in metre=2×1000=2000m

B.salli ride a bike in kilometre=3000/1000=3 km

C.salli rode a bike fastest.sorry i do not know d,e

3.A=7×2.54=17.78cmB.10×2.54=25.4cm

What are the basic parts of sewing machine?​

Answers

Answer:

1. Spool Pin  

Thread usually comes on a spool. That is the wooden thread holder you buy in the store. The spool pin holds the spool of thread for you making it easier for you to thread your machine and keep the thread coming as you want it to. Read about the spool pin felt.

2. Bobbin Binder Spindle  

A bobbin is a little cylinder that may come with or without flanges. It holds the thread that is wound around it. The spindle is where the bobbin is placed during winding.

3. Bobbin Winder Stopper  

The bobbin is only so large. It cannot always hold the amount of thread you want to put on it. This part stops the bobbin from collecting thread when it has reached full capacity.

4. Stitch Width Dial  

On many newer sewing machines, you get a variety of stitch options to use. The purpose of this part is to control the zig-zag stitch option while you are busy concentrating on your sewing.

5. Pattern Selector Dial  

This little dial allows you to select one stitch pattern out of the many that come built into your sewing machine. You just turn the dial to get the pattern that you want on your clothes and other fabrics you want to mend or create.

6. Hand Wheel  

This is the manual needle control which raises or lowers the needle. It is usually located at the right-hand side of the machine. It shouldn’t be that hard to turn.

7. Stitch Length Dial  

More recent sewing machines may have this part attached to them. Its purpose is to control the length of your selected stitch. This helps you stay in control of your sewing duties and make sure you get what you want and need.

8. Reverse Stitch Lever  

Once you push this lever, you get to sew in the opposite direction. This function makes your sewing a little easier and faster to do because you can go forward or in reverse when you need to.

9. Power Switch  

You already know what this switch does. The key to using it is to make sure you turned your sewing machine off before you walk away. Also, it should be located at the right side of your machine.

10. Bobbin Winder Thread Guide  

When you activate this part on your sewing machine, you are guiding the thread towards the bobbin/ This makes winding your thread up a little easier and should prevent twists, tangles or caught thread.

11. Thread Tension Dial  

Tension is important when you do your sewing. Too loose can cause you problems and too much tension could snap your thread and make sewing more time consuming as you have to re-thread the machine. This little part simply controls the tension on the thread so be careful when you use it.

12. Thread Take-Up Lever  

Your top thread passes through this part as you do your sewing. The lever moves up and down with your needle so do not be alarmed that it is constantly moving.

13. Needle Clamp Screw  

Needles do not stay in place by themselves. It would be nice if they did. You need this part to hold your needle where it is supposed to be. It also makes sure your needle is secure as it moves.

14. Presser Foot  

This is the part that holds your fabric so it doe snot slip all over the place while you are working. Controlling your fabric is important while you do your sewing.

15. Bobbin Cover  

Your sewing machine parts do need some protection to keep them in top working order and to help then last you for years. This is the job of the bobbin cover. It protects the bobbin as it covers it.

16. Bobbin Cover Release Button  

Also, you need access to your bobbin when it its filled with thread or there is a problem. This release button helps you to remove the bobbin cover so you have complete access to your bobbin.

17. Feed Dog  

It is an interesting name, but it has a very straightforward function., This part feeds your fabric through the sewing machine while you are sewing. This helps you concentrate on other sewing needs as you work.

18. Needle  

Another self-explanatory label that tells you everything you need to know. The needle is an integral part of the sewing machine and without it, the other parts cannot do their job.

19. Needle Plate  

This part is located right under the needle and an under the presser foot. Its job is to help move the fabric forward as you sew. It may help help push the fabric back when you use the reverse mode on your sewing machine.

Explanation:

Your task is to identify three or more ways that big data is being collected on a regular basis, including one data collection method for each of the following categories:

Data collection on the internet
Digital data collection from a source other than the internet
Analog (non-digital) data collection being performed in physical places

For each of these data collection practices: Describe how the data collection occurs. Analyze the data collection process by answering the following five questions in complete sentences and to the best of your ability:

What data is being collected?
Why is this data being collected?
What are the likely benefits of this data collection?
How might this data collection cause harm?
How likely is it that this data can be accessed by others?

You may use the internet or any other available resources to identify and analyze these data collection strategies.

Answers

Answer:

Data is one of the most valuable resources today's businesses have. ... There are various data-gathering methods you can use with the help of your ... When it comes to data businesses collect about their customers, ... Third-party data offers much more scale than any other type of data, ... Big White Cursor.

Explanation:

The data is one of the most essential and the most important aspects of the  modern world and s collected each and every hour. The data forms an essential element of the internet and digital media.

The data is held soly responsible for the generation of numerous possibilities.The data collected can be used for further processing and creation of new contents.

Learn more about the tasks to identify.

brainly.com/question/20688743.

6. A presentation is widely used to present and effectively​

Answers

Answer:

A Presentation is a collection of slides arranged in a systematic order. 2) A presentation ...

Explanation:

Please give thanks to all my answers and please mark as brilliant and please follow me

1
Select the correct answer from each drop-down menu.
Correctly identify the following software design concepts.
The following are some commonly used software design concepts:
-structural partitioning
-control hierarchy
-Modularity
-Abstraction
refers to the concept that software architecture has the ability to divide into modules and that each
module can be examined independently.
-Refinement
-Modularity
-Abstraction
-Control hierarchy
is a process that elaborates on each design component until it reaches the coding details.
-Software procedure
-Structural partitioning
-Data Structure
allows designers to split a program structure horizontally and vertically.
-Software architecture
-Structural partitioning
-Modularity
-Data Structure
represents logical relationships between individual data elements.

Answers

Answer:

1. Modularity.

2. Refinement.

3. Structural partitioning.

4. Data Structure.

Explanation:

A software development life cycle (SDLC) can be defined as a strategic process or methodology that defines the key steps or stages for creating and implementing high quality software applications. There are six (6) main stages in the creation of a software and these are;

1. Planning.

2. Analysis.

3. Design.

4. Development (coding).

5. Deployment.

6. Maintenance.

One of the most important steps in the software development life cycle (SDLC) is design. It is the third step of SDLC and comes immediately after the analysis stage.

Basically, method design is the stage where the software developer describes the features, architecture and functions of the proposed solution in accordance with a standard. Some of the models or techniques used in the design of a software are;

Modularity: refers to the concept that software architecture has the ability to divide into modules and that eachmodule can be examined independently. Refinement: is a process that elaborates on each design component until it reaches the coding details.Structural partitioning: allows designers to split a program structure horizontally and vertically.Data Structure: represents logical relationships between individual data elements.

Alice just wrote a new app using Python. She tested her code and noticed some of her lines of code are out of order. Which principal of programing should Alice review?

Hand coding
Line coding
Planning & Analysis
Sequencing

Answers

Answer:

Sequencing

Explanation:

I have taken the test

What is this please help me ?

Answers

A OR C is the answer

Answer:

C or A.. should be the answer

Which item would not generate a desktop alert by default in Outlook 2016?

new contact created
meeting request received
email received
task assignment received
i couldn't find this awnser and my teacher is extending our test period for another 20 minutes. please help

Answers

Answer:

New contact created does not generate a desktop alert by default.

Explanation:

edg.2021

Answer:

A

Explanation:

Do all careers or professions need computer science?

Answers

Answer:

no computer science is only needed for coders and engineers not for all is needed ok or one thing is that you study for your knowledge ok

Explanation:

hope it helps you

please mark me as brainlist

time to throw poggers xqc time to throw pogchamp time to throw pogchamp time to throw pogchamp time to throw pogchamp time to throw houhouhouhou time to throw poogcham

Answers

yes thank you very much

Answer:

yep

Explanation:

Help me, I'll mark brainiest

Answers

Answer:

i believe the answers that you are looking for are c and c

Explanation:

again im not 100% sure that is right but i hope they are!

Other Questions
why do you think that about 793 million people are chronically undernourished or malnourished? explain how movements along faults generate earthquakes marianne is a five years younger than her friends if the sum of their age is 61 how old is her friend Three joules of work is needed to shift 10 C of charge from one place to another. The potential difference between the places is ______. *0.3 V0.5 V5 V3 V ANYONE COULD PLZ HELP PLZ "And for that purpose I'll anoint my sword... I'll touch my point/ With thiscontagion, that, if I gall him slightly,/ It may be death." *who said this? which of the following things were the nezca most known for?A. pottery and metal workB. desert floor designsC. religious beliefsD. advanced technologyHELP ME PLEASEE simplify: 4 (3y +x) please show your work One Tuesday evening, an aspiring actress is performing on the stage in a local play, hoping to become a famous movie actress one day. She might get her wish if a was in the audience looking for actors for an upcoming movie and was impressed by her performance. camera operator director producer casting directorplease hurry and thank you!! PLS PLS PLS I NEED HELP WITH MATH!!!! GAVE OFF ALL MY POINTS FOR THIS PLEASE GIVE A GOOD ANSWER!!!!!1. a closed figure made up of line segments 2. any face that is not a base 3. three-dimensional figure with a polygon base and triangles for all other faces 4. three-dimensional figure with two parallel, congruent, polygonal faces and parallelograms for all other faces 5. the perpendicular width of a plane figure 6. a two-dimensional representation of a three-dimensional shape when unfolded 7. a plane figure that is one side of a solid figure 8. a prism with a rectangular base and right angles between the base and sides 9. geometric figure with three dimensions 10. a prism with a triangular base and right angles between the base and sides Which is the primary source of stem thickening in plants? xylem vascular cambium internal phloem sorry but the last answer is a bit glitched out How is this sentence correctly punctuated using commas?Question 2 options:Zachary struggled, to pick up the heavy, bulky box.Zachary struggled to pick up the heavy, bulky, box.Zachary, struggled to pick up the heavy bulky box.Zachary struggled to pick up the heavy, bulky box. Keuka Studies does custom metal sculptures of horses and other animals. A horse sculpture is composed of numerous parts. They use a lathe to construct two types of parts. The "Body" part is used to support the torso of the horse and the "Leg" part is used to support the legs. Each horse sculpture needs 1 Body part and 4 Leg parts. Switching between either of the types of parts requires 12 minutes. Once ready to produce, the lathe produces a Body part in 3 minutes and a single Leg part in 3 minutes. The lathe only makes horse parts. For parts (a)-(d) assume Keuka operates a cyclic schedule in which they make 100 Body parts and then 400 Leg parts. Furthermore, assume the lathe is the bottleneck. Round your answer to 3 decimal places. a. What is the maximum number of horse sculptures Keuka can make per hour? Do not round intermediate calculations. Enteryour answer as a percentage rounded to 2 decimal places. b. What is the utilization (%) of the lathe? was imperialism fair or unfair? why As human populations grow, it becomes more important to use renewable sources of energy. Which of the following objects uses energy from a renewable source?A-a stove that is powered by natural gas B- a refrigerator that runs on solar powerC- a lantern that burns oil from beneath Earth's surfaceD- a toaster that uses electricity from a coal-burning power plant Ed spoke to his cousin in Australia, who told him it was 28 degrees Celsius that day. Ed wasnt sure if that was hot or cold, so he converted the temperature to degrees Fahrenheit. What is the temperature in degrees Fahrenheit?Use the formula, F = StartFraction 9 Over 5 EndFraction C + 32, where F is the number of degrees in Fahrenheit and C is the number of degrees in Celsius. Round your answer to the nearest whole number.48Degrees Fahrenheit50Degrees Fahrenheit82Degrees Fahrenheit108Degrees Fahrenheit Find the cosine of what important fibers are produced by the above structures during mitosis POSSIBLE POINTS 10Using the following set of data, find the upper quartile.17, 29, 32, 9, 30, 14, 8, 39, 11, 32, 23