Three joules of work is needed to shift 10 C of charge from one place to another. The potential difference between the places is ______. *
0.3 V
0.5 V
5 V
3 V​

The interaction between two like-charged objects is repulsive. ... Positively charged objects and neutral objects attract each other; and negatively charged objects and neutral objects attract each other.

Answer:

they repel with each other. object of like charges repel while object of opposite charges attracts with each other.

Answer:

a) the body  is changing direction,

b)the body must go to the left and the acceleration to the right

c) the movement has not started.

d) all points of the motion

Explanation:

In this exercise you are asked to find in which position you have the following characteristics of the movement

a) The velocity is zero and the acceleration is negative

This is when the body reaches the end of the travel and turns around, in this case the speed is zero and the acceleration has the opposite direction to the movement.

In this case the body moves to the right and the acceleration is to the left, therefore the speed decreases

b) The velocity is zero, but the acceleration is positive

This occurs at the points where the speed is changing direction, specifically for this case the body must go to the left and the acceleration to the right

c) Both are zero

This only occurs where the body is stopped and the movement has not started.

d) both the velocity and the relation are nonzero.

This is at all points of the motion since the velocity is constantly changing as long as there is an acceleration

Answer:

They become oppositely charged, which causes them to be attracted to each other.

Answer: number A

Explanation:

If a positive charge and a negative charge interact, their forces act in the same direction, from the positive to the negative charge. As a result opposite charges attract each other: The electric field and resulting forces produced by two electrical charges of opposite polarity. Have a nice day <3

Answer:

Please find attached pdf

Explanation:

Answer:

land becomes unfit for food production

Answer:

Answer is explained in the explanation section below.

Explanation:

Part A)

From conserve moment of force, we have:

F1d1 = F2d2

F1 x (3.80 x [tex]10^{-2}[/tex] m) = 15N x (15 x [tex]10^{-2}[/tex] m)

F1 = [tex]\frac{15 . 15 . 10^{-2} }{3.80 . 10^{-2} }[/tex]

F1 = 59.2 N

Force exerted by the biceps when the hand is empty.

Part B)

The 80 N weight acts at 33 cm and 15 N at 15 cm, then the center of mass is:

x = [tex]\frac{m1x1 + m2x2}{m1+m2}[/tex]

x = [tex]\frac{\frac{80}{9.8} (33 .10^{-2}) + \frac{15}{9.8}(15.10^{-2} }{\frac{80}{9.8} + \frac{15}{9.8} }[/tex]

x = 30.16 x [tex]10^{-2}[/tex] m

Total Weight is:

F = 80N + 15N = 95N

From the conserve moment of force, we have:

F ( 3.8 x [tex]10^{-2}[/tex] ) = 95N (30.16 x [tex]10^{-2}[/tex])

F = 754 N

Part C:

From the above two examples solved, the force exerted by the biceps is higher than downward force, due to this muscle need to be very strong.

Part D)

The force exerted by elbow on the forearm is:

The force exerted by the elbow and biceps are in upward direction and total weight is in downward direction. So, the balancing force in vertical direction is:

F2 + 754N = 95N

F2 = 95N -754N

F2 = -659N

Negative sign shows the force is in downward direction.

Part E)

The bicep muscle acts perpendicular to the forearm, so it is lever arm stays the same. but those of the other two forces decreases as the arm is raised. There tension in the biceps muscle decreases.

Part F)

Angle = 53 degrees.

So,

Force = FcosФ

Force = 754 cos 53

Force = 453.76 N

Part G)

The value of force has gone downwards. It has decreased from that of part B.

Answer:

A. Part a is the attachment

B. total work = 10.4kj

Explanation:

[tex]workdone=nRT1ln\frac{Vb}{Va}[/tex]

T1 = constant temperature

nRT1 = PaVa = PbVb

We write equation as

[tex]workdone =(PaVa)ln\frac{Vb}{Va}[/tex]

5ma = Pa, 5L = Va, Vb = 10L(temperature is doubled)

[tex]w1 = workdone =(5mpa*5L)ln\frac{10L}{5L}[/tex]

W1 = 25 ln2

W1 = 25 x 0.693

= 17.327kj

The isochoric expansion has no change in volume. So,

W2 = 0

Isothermal compression

[tex]w3=nRT3ln\frac{Vd}{Vc}[/tex]

T3 = constant temperature

nRT3 = PcVc = PdVd

[tex]workdone=(PcVc)ln\frac{Vd}{Vc}[/tex]

Pc = 1mpa Vc = 10L Vd = 5L

[tex]w3=(1)(10)ln\frac{5L}{10L}[/tex]

= 10x-0.693

= -6.93kj

Isochoric compression has no change in volume. Workdone w4 = 0

Total workdone = w1 + w2 + w3 + w4

= 17.33 + 0 + (-6.93) + 0

= 10.4kj

Answer:

5m/s^2 is the acceleration.

Answer:

[tex]\boxed {\boxed {\sf a= 5 \ m/s^2}}[/tex]

Explanation:

Acceleration is the change in speed over time.

[tex]a=\frac{ v_f-v_i}{t}[/tex]

The object accelerates from 0 meters per second to 25 meters per second in 5 seconds.

[tex]v_f= 25 \ m/s\\v_i= 0 \ m/s \\t= 5 \ s[/tex]

Substitute the values into the formula.

[tex]a=\frac{ 25 \ m/s -0 m/s }{ 5 \ s}[/tex]

Solve the numerator.

[tex]a=\frac{25 \ m/s}{5 \ s}[/tex]

Divide

[tex]a= 5 \ m/s/s= 5 \ m/s^2[/tex]

The object's acceleration is 5 meters per square second.

Answer:

m = 30, g = 9.8, coefficient = 0.2, so force due to friction = 30 x 9.8 x 0.2 = 58.8 N, so work done by friction = 58.8 x 1.2 = 70.56 J

Explanation:

Answer:

c.holding a sign in the air

Explanation:

because b is kinetic energy and a is also kinetic energy

Answer:

RThe answer is Reflection....

Answer:

difference between the field  = 1.56 N/C

as; 1.56 N/C is greater than 0.77 N/C;

Hence, Honeybees can detected the difference

Explanation:

Given the data in the question;

distance r = 24 cm = 0.24 m

charge 1 Q1 = +30 pC = 30×10⁻¹² C

charge 2 Q2 = +40 pC = 40×10⁻¹² C

Now, electric field due to +30 pC charge

E1 = kQ1/r²

where coulomb constant k is 9 × 10⁹ N.m²/C²

so we substitute

E1 = [( 9 × 10⁹ ) × (30×10⁻¹²)] / (0.24)²

E1 = 0.27 / 0.0576

E1 = 4.69 N/C

electric field due to +40 pC charge

E2 = kQ1/r²

E2 = [( 9 × 10⁹ ) × (40×10⁻¹²)] / (0.24)²

E2 = [( 9 × 10⁹ ) × (40×10⁻¹²)] / (0.24)²

E2 = 0.36 / 0.0576

E2 = 6.25 N/C

Now,

E2 = E1 =  6.25 N/C - 4.69 N/C = 1.56 N/C

difference between the field  = 1.56 N/C

as; 1.56 N/C is greater than 0.77 N/C;

Hence, Honeybees can detected the difference

Answer:

B. It has allowed for faster transmission of Internet signals.

Explanation:

i took the test on engenuity

Fiber-optic technology has allowed for faster transmission of Internet signals.

The term fiber optics, often known as optical fiber, describes the technique used to transport data via light pulses travelling along a glass or plastic fiber.

Here,

In fiber-optic communications, optical fibres are widely used to send light over longer distances and at higher bandwidths (data transfer rates) than electrical cables. They are most frequently used to convey light between the two ends of the fiber.

The concept of complete total internal reflection governs the operation of optical fibres. When a light beam strikes the interior surface of an optical fiber cable with an incidence angle greater than the critical angle, the incident light beam reflects in the same medium, and the occurrence is repeated.

Hence,

Fiber-optic technology has allowed for faster transmission of Internet signals.

To learn more about optical fiber, click:

https://brainly.com/question/3902191

#SPJ5

Answer:

The correct answer is option D.

Explanation:

It is stated in the question that constriction of the vocal tract at a place where the standing wave of a formant exhibits minimum-amplitude pressure oscillations generally causes the formant to drop in frequency so to increase formant frequency, the vocal should expand where the standing wave of a formant exhibits minimum-amplitude pressure oscillations. The answer is D.

I hope this helps.

Answer:

In order to accomplish work on an object there must be a force exerted on the object and it must move in the direction of the force

Explanation:

option a is right

Explanation:

The sound it emits comes from what is known as the ultrasonic range, a pitch that is so high humans can't hear it. Dogs can hear these sounds, however, as can cats and other animals. Because of this, the dog whistle is a favored training tool, though it may not be for every dog parent.

Air resitances also know as drag is a force that is caused by air the force acts in oppsite directions to an object moving through the air ..

HOPE THIS HELP YOU ..

Answer:

0.339 kgm²

Explanation:

We know the period of this pendulum, T = 2π√(I/mgh) where I = moment of inertia of the object about the pivot axis, m = mass of object = 2.15 kg, g = acceleration due to gravity = 9.8 m/s² and h = distance of center of mass of object from pivot point = 0.163 m.

Since T = 2π√(I/mgh), making I subject of the formula, we have

I = mghT²/4π²

Now since it takes 241 s to complete 113 cycles, then it takes 241 s/113 cycles to complete one cycle.

So, T = 241 s/113 = 2.133 s

So, Substituting the values of the variables into I, we have

I = mghT²/4π²

I = 2.15 kg × 9.8 m/s² × 0.163 m × (2.133 s)²/4π²

I = 15.63/4π² kgm²

I = 0.396 kgm²

Now from the parallel axis theorem, I = I' + mh² where I' = moment of inertia of object with respect to its center of mass about an axis parallel to the pivot axis

I' = I - mh²

I' = 0.396 kgm² - 2.15 kg × (0.163 m)²

I' = 0.396 kgm² - 0.057 kgm²

I' = 0.339 kgm²

Answer:

A is indeed correct

Explanation:

just did the question

The option that correctly matches the chemical formula of a compound with its name is N₂O₃ dinitrogen trioxide.

Dinitrogen trioxide is one of the simple nitrogen oxide. The chemical compound formula of Dinitrogen trioxide N₂O₃.

That is, it consists of 2 molecules of nitrogen, hence the prefix "Di" and 3 molecules of oxygen given the prefix tri.

Thus, the option that correctly matches the chemical formula of a compound with its name is N₂O₃ dinitrogen trioxide.

Learn more about Dinitrogen trioxide here: https://brainly.com/question/21392313

#SPJ2

Answer:

178.6 m

Explanation:

Since the car moves in a circular path, it experiences a centripetal force, F = mv²/r where m = mass of car, v = speed of car = 35 m/s and r = radius of curvature of path.

Now, for the car not to skid, this centripetal force must be equal to the frictional force, F' acting in the opposite direction.

So, F' = μN where μ = coefficient of static friction(since the car does not move in this direction) and N = normal force = mg where m = mass of car and g = acceleration due to gravity = 9.8m/s²

F' = μmg

Since F = F'

mv²/r = μmg

dividing both sides by m, we have

v²/r = μg

multiplying both sides by r, we have

v² = μgr

dividing both sides by μg, we have

r = v²/μg

Here we use μ = coefficient of static friction(since the car does not move in this direction) = 0.70. Substituting the other variables into the equation, we have

r = v²/μg

r = (35 m/s)²/(0.70 × 9.8m/s²)  

r = 1225 m²/s²/6.86m/s²)  

r = 178.6 m

So, the minimum radius of curvature of the corner is 178.6 m

Answer:

0.13 m/s

Explanation:

Unfortunately, I don't have an explanation but I guessed the correct answer.

Answer:

by reducing friction.....

Answer:

ok i think the answer would be C. or B. hope im right

I think you need Graph to figure it out

Using Newton's second law and kinematic projectile motion we can find the proton deflection y = 5.43 10⁻⁷ m, in the opposite direction to the electron deflection.

given parameters

to find

For this exercise we will use Newton's second law where the force is electric

            F = ma

            F = q E

where F is the force, q the charge, E the electric field, m the mass and the acceleration of the particle

           q E = m a

           a = q / m E

This acceleration is the direction of the electric field that is perpendicular to the initial velocity (v_i)

Having the acceleration we can use the kinematics relations

If we make the direction of the initial velocity coincide with the x-axis

             v_i = cte

             v_i = x / t

             t = x/ v_i

on the y-axis is in the direction of the electric field

            y = v_{iy}  t + ½ a t²

on this axis the initial velocity is zero

            y = [tex]\frac{1}{2} (\frac{q}{m} E) \ t^2[/tex]

subtitute

            y =            (1)

Electron motion.

Let us propose the expression for the electron situation, the length of the displacement must be the same for electron and proton, suppose that it is x = L

In this case the charge q = -e and the mass m = m_e

its substitute in  equation 1

            y₁ = [tex]\frac{1}{2} \ ( \frac{-e}{m_e} E) \ \frac{x^2}{v_i^2}[/tex]  

where y₁, is the lectron deflection.

Proton motion

Between the proton and the electron we have some relationships

          q_p = -e

          m_ = 1840 m_e

we substitute in the equation  1

         y₂ = ½ e / 1840 me E x² / vi²

         y₂ =

         y₂ = - y₁ / 1840

         y₂ = - 0.001 / 1840

         y₂ = - 5.43 10⁻⁷ m

The negative sign indicates that the deflection of the proton is in the opposite direction to the deflection of the electron.

In conclusion they use Newton's second law and kinematics we can find the proton deflection is y = 5.43 10⁻⁷ m

learn more about electric charge movement here:  https://brainly.com/question/19315467

Answer:

a)  x = 660 m, b)  λ = 0.330 m, c) Δλ = 0.1 cm, d)    Δf = 104

Explanation:

a) the distance in which the train of waves extends can be obtained from the uniform movement

             v = x / t

             x = v t

             x = 330 2

             x = 660 m

b) the speed of sound is related to the wavelength and frequency

             v = λ f

              λ = v / f

              λ = 330/1000

              λ = 0.330 m

c) The precision in the measurement of the wavelength refers to the error or uncertainty in the measurement, if the measurement is direct with a tape measure the precision is the appreciation of the tape measure, in general it is 0.1 cm

d) the accuracy of the frequency in general the frequency is calculated from the measurements of period T

                f = 1 / T

The precision of the period is data by the chronometer used, in general time a press of 0.01s, by the response time of the people

               Δf = df / dT    ΔT

               Δf = 1 / T² ΔT

                Δf = 1 / (0.001)² 0.01

                 Δf = 104

As we can see, a much more precise system is needed to reduce the error

Answer:

a. 1.93 s b. 3 s

Explanation:

a. At full power, how long would it take for the car to accelerate from 0 to 58.0mph?

Since the car accelerates from 0 to 30 mph in 1.00 s, we find its acceleration, a from a = (v - u)/t where u = 0 m/s, v = 30 mph and t = 1.00s = 1/3600 h

So, substituting the values of the variables into the equation, we have

a = (v - u)/t

a = (30 mph - 0 mph)/ 1/3600 h

a = 30 mph × 3600 /h

a = 108000 mph²

So, we find the time it takes the car to accelerate to 58 mph from 0 mph from

t = (v' - u')/a where u = 0 mph, v = 58 mph and a = 108000 mph²

So, substituting the value of the variables into the equation, we have

t = (v' - u')/a

t = (58 mph - 0 mph)/108000 mph²

t = 58 mph/108000 mph²

t = 5.37 × 10⁻⁴ h

t = 5.37 × 10⁻⁴ × 3600 s

t = 1.93 s

b. A more realistic car would cause the wheels to spin in a manner that would result in the ground pushing it forward with a constant force (in contrast to the constant power in Part A). If such a sports car went from zero to 29.0mph in time 1.50s , how long would it take to go from zero to 58.0mph ?

Since the car accelerates from 0 to 29 mph in 1.50 s, we find its acceleration, a from a = (v - u)/t where u = 0 m/s, v = 29 mph and t = 1.05s = 1/3600 h

So, substituting the values of the variables into the equation, we have

a = (v - u)/t

a = (29 mph - 0 mph)/ 1.5/3600 h

a = 29 mph × 3600/1.5 /h

a = 104400/1.5 mph²

a = 69600 mph²

So, we find the time it takes the car to accelerate to 58 mph from 0 mph from

t = (v' - u')/a where u = 0 mph, v = 58 mph and a = 69600 mph²

So, substituting the value of the variables into the equation, we have

t = (v' - u')/a

t = (58 mph - 0 mph)/69600 mph²

t = 58 mph/69600 mph²

t = 8.33 × 10⁻⁴ h

t = 8.33 × 10⁻⁴ × 3600 s

t = 3 s

Answer:

D The chemicals on the right side of a chamical equation