Answer:
answer is option (c) child labour
Which of the following statements is correct about air temperature?
1. When air temperature is higher, the weather is warmer.
2. Warm air falls to the ground.
3. Freezing air temperatures increase the chances of rain.
4. When air temperature is higher, the weather is colder.
Explanation:
Warm air falls to the ground
The statement that is correct about air temperature is when the air temperature is higher, the weather is warmer. The correct option is 1.
What is air temperature?A measurement of the air's heat or cold is its temperature. It is the weather parameter that is most frequently measured.
The kinetic energy, or energy of motion, of the gases that make up air, is more explicitly described by temperature. The temperature rises as gas molecules move more swiftly.
Surface temperatures are typically hotter than air temperatures. Parking your car in the sun is an illustration of this. The air inside the car will be fairly close to the outside air temperature and you may leave the windows down and yet have excellent ventilation.
Therefore, the correct option is 1. When the air temperature is higher, the weather is warmer.
To learn more about air temperature, refer to the link:
https://brainly.com/question/26706491
#SPJ6
If the total force acts in the opposite direction as the cabinet is sliding, the cabinet would
A) slow down
B) speed up
C) remains the same speed
D) slow down, change direction and then speed up going the other way
E) remains the same speed, but changes direction
A force of 10 N acts to the left and a force of 5 N acts to the right on an object of mass 1 kg. If its initial speed is zero , what is its velocity after 1 second ?
Answer: -5 m/s
Explanation:
First find the net force by summing up the forces:
-10N + 5N = -5N
Use Newton's Second Law of motion to solve for the acceleration:
F = ma
-5N = 1kg(a)
a = -5 m/s^2
Use the first kinematic equation to solve for the final velocity:
Vf = Vi + at
Vf = 0 + (-5)(1)
Vf = -5 m/s
An airliner flys 950 miles from S.B. to Denver at 500 mph. How long does it take to fly to
Denver? time = distance / speed
Answer:
114 minutes
Explanation:
hope this helps. I just divided 950 by 500 that is 1.9 and 1.9 in minutes is 114. gl
if the charge of the force is doubled would the force double
Answer: The electrostatic force between two point charge particles is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. So, if you double the individual charges while keeping the same distance, the net electrostatic force will be four times the previous value.
Explanation:
Since, we know
F = (k×q1×q2)/r²
When the charges are doubled, we have :
F' = (k × 2q1 × 2q2)/r²
F' = 4 (k×q1×q2)/r²
Thus,
F' = 4F
Hence, the force becomes 4 times its initial value.
Anyone knows this ???
Answer:
JUST A MINUTE KAPENG MAINIT
True or false: Energy is everything and the whole universe is governed by energy
Answer:
True
Explanation:
I took the test
what is the wavelength of these waves???
Answer:
The wavelength is 6 meters.
Explanation:
Let the displacement function of a particle is x(t)=(20t^2-15t+200). Find the total displacement, instantaneous velocity and instantaneous acceleration
Answer:
A.) 39.5 m
B.) 0
C.) 60m/s^2
Explanation:
Given that a displacement function of a particle is x(t)=(20t^2-15t+200).
To Find the total displacement,
Reduce everything by dividing them by 5
X(t) = 4t^2 - 3t + 40 ...... (1)
For instantaneous velocity, differentiate x(t). That is,
dy/dt = 60t - 15 ...... (2)
But dy/dt = velocity.
If dy/dt = 0, then
60t - 15 = 0
60t = 15
t = 15/60
t = 0.25s
Substitutes t in equation (1)
Total displacement will be
X(t) = 4(0.25)^2 - 3(0.25) + 40
X(t) = 0.25 - 0.75 + 40
Total displacement = 39.5 m
To calculate instantaneous velocity, substitute t into equation (2)
V = 60 (0.25) - 15
V = 0.
and to find instantaneous acceleration, differentiate dv/dt
dv/dt = 60
Therefore, acceleration = 60 m/s^2
how you would orient the magnets and what you would do with the magnets to achieve maximum repulsion
The orientation of the magnets that gives the strongest repulsion because these poles and facing each other that is then leaves highest flux density of the poles for a force of repulsion to be very high
what is mass in physics
Answer:
Mass, in physics, quantitative measure of inertia, a fundamental property of all matter. It is, in effect, the resistance that a body of matter offers to a change in its speed or position upon the application of a force. The greater the mass of a body, the smaller the change produced by an applied force.
Explanation:
pls mark as brainliest
Answer:
Mass, in physics, quantitative measure of inertia, a fundamental property of all matter. It is, in effect, the resistance that a body of matter offers to a change in its speed or position upon the application of a force. The greater the mass of a body, the smaller the change produced by an applied force.
Explanation:
Hope that helps! :)
Type the correct answer in the box. Use numerals instead of words. Frank has a sample of steel that weighs 80 grams. If the density of his sample of steel is 8 g/cm3, what is the sample's volume? The sample's volume is cm3.
Answer:
10cm^3
Explanation:
Given data
Mass of steel = 80grams
density of steel= 8 g/cm^3
We know that the formula for density is given as
density= mass/volume
make volume subject of formula
volume= mass/density
volume=80/8
volume= 10cm^3
Hence, the volume 10cm^3
water is used in car radiators as coolant because of
Water is used as a coolant in automobiles radiators because it has high specific heat capacity. So, it absorbs a large amount of heat for a degree rise in temperature.
Two spheres are moving towards each other. Which of the following is the
best evidence that the spheres have transferred energy from one to the other?
A.The friction of the surface decreases
B.Gravity is always acting on the spheres
C.The motion of the sphere changes
Or
D.Both of the spheres have the same mass
Answer:
D
Explanation:
If they are both moving at the same speed then its D.
What is the current in a circuit that has a resistance of 75Ω and a voltage drop of 120V across the cell? (I'll give brainliest!)
Resistance = (voltage) divided by (current)
= (120 V) / (0.5 Amp)
= 240 ohms .
This tasty snack starts as a kernel and is “popped” then
covered in salt, butter, caramel, peanuts, you name it.
Through thermal energy we've learned to heat things, you
could use conduction, convection and/or radiation. Describe
1 cooking option in detail including whether it is convection,
conduction or radiation. Must be at least 2 sentences.
How many total molecules are present in the formula below
2H2O
I'm guessing 6.
the coefficient of two turns our hydrogen into 4 and our oxygen into 2 which makes a total of 6 molecules.
3 Below, someone is trying to balance a plank with
stones. The plank has negligible weight.
a Calculate the moment of the 4 N force about O.
b Calculate the moment of the 6 N force about O.
- 2 m *
2 m-*
4 m
Р
1
4N
6N
Answer:
a. The moment of the 4 N force is 16 N·m clockwise
b. The moment of the 6 N force is 12 N·m anticlockwise
Explanation:
In the figure, we have;
The distance from the point 'O', to the 6 N force = 2 m
The position of the 6 N force relative to the point 'O' = To the left of 'O'
The distance from the point 'O', to the 4 N force = 4 m
The position of the 4 N force relative to the point 'O' = To the right of 'O'
a. The moment of a force about a point, M = The force, F × The perpendicular distance of the force from the point
a. The moment of the 4 N force = 4 N × 4 m = 16 N·m clockwise
b. The moment of the 6 N force = 6 N × 2 m = 12 N·m anticlockwise.
A force of 450 N moves a body through 300 cm in the direction of force. Calculate the work
done by the force.
Answer:
150J
Explanation:
Formula : Work done
Force x distance
work done = force x distance
Distance should be measured in meters
300÷100=3m
work done = 450 x 3
=150J
Which of the following is a variable property for a gas? Select all that apply.
shape
mass
volume
density
Answer:
volume
Explanation:
mass density and shape are not variable to my view.
pressure volume
number of moles and temperature are variable
Motion and acceleration may only be used to refer to physical objects moving or changing speed/direction
Answer:
True
Explanation:
It is TRUE that Motion and acceleration may only be used to refer to physical objects moving or changing speed/direction.
This is because if an object is not moving or changing speed/direction to a determined point of reference, the object is considered to be at rest or motionless, thereby, with no absolute point of reference, absolute motion or acceleration cannot be distinguished.
Please help, I’ll give brainliest!
Answer:
According to Figure 3, to purchase and install a wind turbine costs $50,000, while to purchase and install a hyrdroelectric generator costs $20,000. The hyrdroelectric generator is relatively cheaper compared to the wind turbine. While the hydroelectric generator is cheaper, it only produces 8 kilowatts of constant power output, and, on the other hand, the wind turbine produces an average of 10 kilowatts of power output. The hydroelectric generator processes constant power output, while the wind turbine processes varying power outputs, with an average of 10 kilowatts.
Answer:
wind turbines r better than hydroelectric generators
Explanation:
When the comet passes close to the sun, it has a visible tail. Typically, the comet is only visible for a matter of days while it may be invisible for years. Why does the comet spend so little time close to the sun?
Answer:
The comet is locked in the Sun's gravity. as it falls deeper in the gravity we'll, its velocity increases. As is travels closer to the Sun, it is trying to break away, but cannot. This transforms into a sideways movement that produces a tight turn. It races further out of the gravity well, and sheds velocity.
In a bar magnet the magnetic force seems to come from each end. The ends of a bar magnet are
called the___
What one word completes the sentence?
Explain why it is better to jump and land with bent knees rather than straight legs? Use key physics vocabulary.
Answer:
Bent knees
Explanation:
Depending the height your jumping from, if you were jumping from a high structure it's best if you jump and land on knees so you dont sprang your ankles from jumping and landing on your straight legs, you could even pull a muscle if you land on straight legs.
READ ALL PLEASE
So I have been giving away points
But now that i have a lot I shall do another points give away yes
Now hurry and add a answer :V
Answer:
can I have please I will follow u..............
A stovetop burner on medium reaches 95°C. Which will also receive a flow of heat directly from the burner? the surrounding air a burner at the same temperature a pan heated to 100°C hotter water inside a pan
Answer:
Option C, a pan heated to 100°C
Explanation:
The pan on the burner will be in direct contact of the heat released by burner and hence the pan will receive the direct flow of heat from the burner.
However, the water is the pan will be heated by the heat transferred from the pan to the water in it. Water will not receive heat directly from the burner.
Hence, option C is correct
Answer:
C or 3 a pan heated to 100°CExplanation:
I have proof that it it most likely right with a side of memes.
A student swings a 5.0 Kg pail of water in a vertical circle of radius 1.3m. What is the minimum speed at the top of the circle if the water is not to spill from pail.
Answer:
v = 3.57 m / s
Explanation:
Let's use Newton's second law in the upper part of the circle, with the minimum speed so that the water does not rest on the circle, that is, the normal is zero
W = m a
acceleration is centripetal
a = v² / r
let's substitute
mg = m v² / r
v = [tex]\sqrt{r g }[/tex]
let's calculate
v = [tex]\sqrt{1.3 \ 9.8}[/tex]ra 1.3 9.8
v = 3.57 m / s
Which angle allows the soil to receive the most direct light from the lamp?
0 degrees
20 degrees
45 degrees
90 degrees
Answer:
D. 90 degrees
Explanation:
just finished lab
pls help i’ll give brainliest if you give a correct answer!!
Answer: The gravitational force acting on the table.
Explanation: