What is the similarity between 0.6 M KI and 0.6 m KI ?​

Answer:

Tornadoes form when warm, humid air collides with cold, dry air.

Explanation:

The denser cold air is pushed over the warm air, usually producing thunderstorms. The warm air rises through the colder air, causing an updraft. The updraft will begin to rotate if winds vary sharply in speed or direction.

// have a great day //

Answer:

your question says of the following but their isn't any of the following ):

Explanation:

But other than than that person right up above

Answer:

Explanation:

A battery

Answer:

Ac motor is in this images

The right response is to raise the internal gas pressure. When a sealed glass jar is heated, the temperature of the gas within rises, causing the gas molecules to travel faster and collide with the jar's walls more often and with more force, increasing the gas's pressure.

Gas molecules are made up of atoms that are linked together. These interatomic connections function similarly to springs, connecting atoms of varying masses. This connection vibrates at a constant frequency known as the natural frequency. Atoms, molecules, and/or ions are all present in gases, liquids, and solids, but their behavior varies between the three phases. The graphic below depicts the tiny differences. A gas as seen via a microscope. A gas is a condition of stuff that does not have a set volume or form. Air, water vapor, and helium are examples of gases. A gas is a kind of stuff that does not have a defined volume or shape. To put it another way, a gas takes on the shape and volume of its container.

Here,

The correct answer is Increase the internal gas pressure as When a sealed glass jar is heated, the temperature of the gas within rises, forcing the gas molecules to travel faster and hit with the jar's walls more often and with more force, raising the gas's pressure.

To know more about gas molecule,

https://brainly.com/question/29848914

#SPJ1

Answer:

The answer is "Option A"

Explanation:

Given:

Moles in [tex]NaOH = 0.50[/tex]

The equation formula for [tex]NaOH[/tex]and[tex]H_2SO_4[/tex] reactions as follows:

[tex]2NaOH+H_2SO_4\rightarrow Na_2SO_4+2H_2O[/tex]

The reaction's stoichiometry:

If 2 moles of [tex]NaOH[/tex] react with 1 [tex]H_2SO_4[/tex] mole

Thus 0.50 [tex]NaOH[/tex] moles react with =  [tex]\frac{1}{2} \times 0.50[/tex] [tex]H_2SO_4[/tex] moles

So, the final value is= 0.25

C.

i cant explain why..................

Answer:

a) 600 J

b) 75 W

Explanation:

Force= 400 N, distance = 150 cm = 1.5 m, time= 8s

a) Work is the product of force acting on an object and distance (or displacement). The S.I unit of work is the joules.

Work = force × distance = 400 × 1.5 = 600 J

b) Power is the amount of energy transferred per unit time. It is the ratio of work to time. The S.I unit of power is watt

Power = work/time = 600 / 8 = 75 W

Answer: The reaction will shift in left or backward direction.

Explanation:

Any change in the equilibrium is studied on the basis of Le-Chatelier's principle. This principle states that if there is any change in the variables of the reaction, the equilibrium will shift in the direction to minimize the effect.

For the given equation:

[tex]H_2(g)+I_2(g)\rightleftharpoons 2HI(g)+heat[/tex]

As the given reaction is exothermic as the heat is released in the reaction. When the temperature is raised , the reaction will shift in a direction where temperature is decreasing and that is the reverse reaction which is endothermic in nature.

Thus the reaction will shift in left or backward direction.

Answer:

[OH] = 6.31 * 10^-7 M

Explanation:

Mathematically;

pH + pOH = 14

Mathematically;

pH = -log [H3O+]

also;

pOH = -log [OH]

From the question; [H3O+] = 1.75 * 10^-8 M

pH = -log [1.75 * 10^-8]

pH = 7.76

since pH is normally given to 1 decimal place

we can say pH = 7.8

Now;

pH + pOH = 14

pOH = 14-7.8

pOH = 6.2

now pOH = -log [OH]

[OH] = -antilog 6.2

[OH] = 6.31 * 10^-7 M

-Pure magnesium is commonly made by separating it from seawater. This process is known as electrolysis. The liquid magnesium formed is cooled into convenient blocks of metal known as ingots. The chlorine gas is recycled to form hydrochloric acid for the production of more magnesium chloride.

Answer:

  presents longitude lines as parallel

Explanation:

The Mercator projection shows longitude lines as  parallel, hence greatly distorts sizes and distances near the poles. A useful feature is that a course of constant bearing shows as a straight line.

Answer:

C.) presents longitude lines as parallel

Explanation:

Took it on E2020

Answer:

metals donate electrons to nonsmetals

Answer:

Oil prices would decrease, and availability would increase

Explanation:

Answer:

The empirical formula is same as the molecular formula = C6H10S2O

Explanation:

we start by dividing the percentage of each of the elements by their atomic mass

Carbon = 44.4/12 = 3.7

Hydrogen = 6.21/1 = 6.21

Sulphur = 39.5/32 = 1.234375

oxygen = 9.89/16 = 0.618125

That of oxygen is smallest so we divide all by that of oxygen

C = 3.7 / 0.618125 = 6

H = 6.21/ 0.618125 = 10

S = 1.234375/ 0.618125 = 2

Automatically, oxygen is 1

So the empirical formula is;

C6H10S2O

Let’s get its molecular formula. We multiply each of the subscript by the number;

(72 + 10 + 64 + 16)n= 162

162n = 162

n = 1

So the molecular formula is same as the empirical formula

Answer:

In order to take steps by humans for controlling the change in climate.

Explanation:

It is important that scientist find out the change which occurs in the climate with the passage of time by performing experiments and also repeat the experiments in order to verify their findings. Due to these experiments, scientists also find out the reasons behind of climate change which enable us to take steps in preventing the change that occurs in the environment. it is also important for scientists to be able to explain how they know that climate has changed over time in order to explain that he is not assuming or making predictions, he has to provide evidence for his statement which is only be possible through experiments.

[H+]=3.98x10^-9

[H+]=10^-pH=10^-8.4

[H+]=10^-11, base

[H+]=10^-pH=10^-11

A solution with a pH of more than 7 is basic.

Lemon juice because it is more acidic

pH of lemon juice: 2.5

pH of vinegar: 3.3

Since the pH of lemon juice is lower, it is more acidic and will be more effective at removing the basic deposits.

Answer:

7.8

Explanation:

pH + pOH = 14

pOH = 14 - 6.2

= 7.8

Answer:

The site at which the lander would have the greatest amount of gravitational potential energy is X

Explanation:

The formula for gravitational potential is given as follows;

[tex]PE_G = m \times g \times \Delta H[/tex]

Where:

g = Acceleration due to gravity

m = Mass of the lander

ΔH = Height above surface

Landing site --- Height above surface --- Acceleration due to gravity

W                        32                                    1.6

x                          16                                    3.7

Y                         35                                    1.6

Z                         12                                     3.7

Therefore, we have;

For site W

[tex]PE_G = m \times 1.6 \times 32 = 51.2 \cdot m[/tex]

For site X

[tex]PE_G = m \times 3.7 \times 16= 59.2 \cdot m[/tex]

For site Y

[tex]PE_G = m \times 1.6 \times 35 = 56 \cdot m[/tex]

For site Z

[tex]PE_G = m \times 3.7 \times 12 = 44.4 \cdot m[/tex]

Hence the site at which the lander would have the greatest amount of gravitational potential energy is X with [tex]PE_G[/tex] = 59.2·m.

Gravitational energy is the power stored in an object due to the intensity of gravity or because the article is located vertically.

The correct answer is:

The site at which the lander would have the greatest amount of gravitational potential energy is X.

The correct explanation for site X is:

The gravitational energy can be calculated as the product of mass, gravitational field and height.

[tex]{\text{PE}_{\text G}&= \text{m}\; \times\text g\times \Delta\text H[/tex]

Where,

Given,

Landing site        Height above surface              Gravity

    W                                    32                                    1.6

    X                                     16                                     3.7

    Y                                     35                                     1.6

    Z                                     12                                      3.7

We can calculate Gravitational energy for all the sites as follows:

       [tex]{\text{PE}_{\text G}&= \text{m}\; \times\ 1.6\times 32 = 51.2 \text \; \times \text {m}[/tex]

       [tex]{\text{PE}_{\text G}&= \text{m}\; \times\ 3.7\times 16 = 59.2 \text \; \times \text {m}[/tex]

       [tex]{\text{PE}_{\text G}&= \text{m}\; \times\ 1.6\times 35 = 56 \text \; \times \text {m}[/tex]

       [tex]{\text{PE}_{\text G}&= \text{m}\; \times\ 3.7 \times 12= 44.4 \text \; \times \text {m}[/tex]

Therefore, the greatest amount of gravitational energy 59.2m is present on-site X.

To learn more about gravitational potential energy follow the given link:

https://brainly.com/question/19768887

Answer:

created an organizational hierarchy

Explanation:

When an F atom becomes an F-ion, the F atom gains an electron.

Learn more at: https://brainly.com/question/13495616?referrer=searchResults

The Fluoride ion given has a -ve charge onto it. Thus in order to become stable Fluorine gains an electron. Thus option b is correct.

The elements in the periodic table try to attain the stable noble gas configuration in the order to become stable. The noble gas configuration has the elements to be less reactive.

When the atom loses an electron in order to become more stable,  a +ve charge has been implemented onto the ion.

When the atom gains an electron to become stable, a -ve charge has been added to the ion.

The Fluoride ion given has a -ve charge onto it. Thus in order to become stable Fluorine gains an electron. Thus option b is correct.

For more information about atom, refer to the link:

https://brainly.com/question/21850455

Answer:

Every species is made of different elements.

Explanation:

Living organisms are classified by their species. Species refer to a group of closely related individual organisms which are callable of interbreeding with each other and exchanging genetic material.

Member of a species have similar genetic make up and often look alike, it is the lowest taxonomic rank of closely related organisms.

Members of of different species are often composed of different elements. Since individual organisms are members of a given species, we can say that every species of organisms are made up of different elements.

explanation

the chemical formula of water is H²O.

Hydrogen+Oxygen=water

answer

Hydrogen-Water-Hydrogen

Answer: The IUPAC name of [tex]CH_3C\equiv CCH_2CH_2Cl[/tex] is 5-chloro-2-pentyne

Explanation:

1. First select the longest possible carbon chain.  For the number of carbon atom, we add prefix as 'meth' for 1, 'eth' for 2, 'prop' for 3, 'but' for 4, 'pent' for 5, 'hex' for 6, 'sept' for 7, 'oct' for 8, 'nona' for 9 and 'deca' for 10.

2. The longest possible carbon chain should contain all the bonds and functional groups.

3. The numbering is done in such a way that the carbon containing the functional group or substituent gets the lowest number. Triple bond is given priority over substituent halogen.

4. The naming of alkane is done by adding the suffix -ane, alkene by adding the suffix -ene, alkyne.

Thus the IUPAC name of [tex]CH_3C\equiv CCH_2CH_2Cl[/tex] is 5-chloro-2-pentyne

Answer:

sodium, silicon, and argon

Explanation:

castle learning

Answer:

1 mole of nitrogen (N2) reacts with 3 moles of hydrogen (H2) to form 2 moles of ammonia (NH3) ... 4 NH3 (g) + 5 O2 (g) --> 4 NO (g) + 6 H2O (g) ... Example: What is the molar ratio between Li and N2 in the following reaction

Explanation:

1 mole of nitrogen (N2) reacts with 3 moles of hydrogen (H2) to form 2 moles of ammonia (NH3) ... 4 NH3 (g) + 5 O2 (g) --> 4 NO (g) + 6 H2O (g) ... Example: What is the molar ratio between Li and N2 in the following reaction

Answer:

it burns through oxygen gas.... through the process known as combustion.... combustion is the process of burning materials in the presence of Air

Answer:

Scientists consider human to be" carbon creatures" because carbon atoms form the backbone or foundation of pretty much the essential biological molecules floating around in our bodies (except water, of course.) All in all, scientists can consider humans to be " carbon creatures" because our skin, hair and cells are all made out of molecules that contain huge amounts of carbon.

Hope this helps! God bless!

Answer:

5010J

Explanation:

The following data were obtained from the question:

Mass (m) = 15g

Heat of fusion (ΔHf) = 334J/g

Heat required (Q) =..?

The heat energy required to melt the ice can be obtained as follow:

Q = m·ΔHf

Q = 15 x 334

Q = 5010J

Therefore, the heat energy required to melt the ice is 5010J.

Answer:

A) H2O2

Explanation:

Hydrogen peroxide is written as H2O2, which is the chemical formula of the compound, but this can be simplified. Since both H and O have the subscript of 2, they can be simplified to 1, so the empirical formula for H2O2 would be just H and O together (Brainly won't let me say the empirical form because it has the same spelling as a swear word). Thus, the empirical formula and chemical formula are different.

In the case of the other options, they are all in their simplest form and cannot be simplified further, so they are already in their empirical form, so both the chemical form and empirical form are the same.

Answer:

Option C. By increasing the temperature

Explanation:

From the graphical illustration above, we see clearly that the volume and temperature of the gas are directly proportional. This implies that as the temperature increases, the volume will also increase and as the temperature decreases, the volume will also decrease. This can further be explained by using the ideal gas equation as shown below:

PV = nRT

P is the pressure.

V is the volume.

n is the number of mole.

R is the gas constant.

T is the temperature.

PV = nRT

Divide both side by P

V = nRT/P

Since n and P are constant, the equation above becomes:

V & T

V = KT

K is the constant.

The above equation i.e V = KT implies that:

As T increases, V will also increase and as T decreases, V will also decrease.

Considering the question given above,

The volume of the gas can be increased if the temperature is increased.