Answer: D
Explanation:
When 12.50 mL of 1.05 M KOH is added to 50.0 mL of 0.225 M HBr, the resulting solution has a pH of 13.35.
Here’s how to calculate it:
First, we need to determine the number of moles of KOH and HBr in the solution:
moles of KOH = (12.50 mL) * (1.05 mol/L) * (1 L/1000 mL) = 0.013125 mol moles of HBr = (50.0 mL) * (0.225 mol/L) * (1 L/1000 mL) = 0.01125 mol
KOH is a strong base and HBr is a strong acid, so they will react completely to form water and a salt (KBr):
KOH + HBr -> KBr + H2O
The number of moles of KOH is greater than the number of moles of HBr, so there will be an excess of KOH in the solution after the reaction is complete:
moles of excess KOH = moles of KOH - moles of HBr = 0.013125 mol - 0.01125 mol = 0.001875 mol
The total volume of the solution is the sum of the volumes of KOH and HBr:
total volume = 12.50 mL + 50.0 mL = 62.5 mL
The concentration of excess OH- ions in the solution is:
[OH-] = moles of excess KOH / total volume = 0.001875 mol / (62.5 mL * (1 L/1000 mL)) = 0.03 M
The pOH of the solution can be calculated using the formula pOH = -log[OH-]:
pOH = -log(0.03) = 1.52
The pH can be calculated using the formula pH + pOH = 14:
pH = 14 - pOH = 14 - 1.52 = 13.35
So the correct answer is D. 13.35.
After some salt was added to it, a 45.4 g solution in a coffee-cup calorimeter increased in temperature from 23.0 oC to 31.5 oC. The specific heat constant (c) for the solution is 1 cal/g oC. The q of the reaction is ______ cal
The amount of heat absorbed during the reaction is 385.9 cal.
How to calculate heat in calorimetry?Calorimetry is the science of measuring the heat absorbed or evolved during the course of a chemical reaction or change of state.
The amount of heat in a reaction can be calculated as follows;
Q = mc∆T
Where;
Q = quantity of heat absorbedm = mass of substancec = specific heat capacity∆T = change in temperatureQ = 45.4 × 1 × {31.5 - 23)
Q = 45.4 × 8.5
Q = 385.9 cal
Learn more about calorimetry at: https://brainly.com/question/25384702
#SPJ1
Gaseous butane (CH3(CH2)2CH3) will react with gaseous oxygen (02) to produce carbon dioxide (CO2) and gaseous water (H2O). Suppose 34.g of butane s mixed with 200. g of oxygen. Calculate the maximum mass of water that could be produced by the chemical reaction. Be sure your answer has the correct number of significant digits.
The maximum mass of water that can be produced by the reaction is 43.3 g, rounded to three significant figures.
Determining the maximum mass of water producedThe balanced chemical equation for the reaction between butane and oxygen is:
C4H10 + 13/2 O2 → 4 CO2 + 5 H2O
From the equation, we can see that 1 mole of butane reacts with 13/2 moles of oxygen to produce 5 moles of water.
moles of butane = 34. g / 58.12 g/mol = 0.585 mol
moles of oxygen = 200. g / 32.00 g/mol = 6.25 mol
Determining the limiting reactant.
butane : oxygen = 0.585 mol : 6.25 mol
= 0.0936 : 1.00
stoichiometric ratio = 1 : 13/2
= 0.7692 : 1.00
Since the actual ratio is lower than the stoichiometric ratio for oxygen, it is the limiting reactant.
The maximum amount of water that can be produced is determined by the amount of limiting reactant (oxygen).
moles of water = 5/13 * 6.25 mol
= 2.403 mol
Finally, we can convert the moles of water to grams:
mass of water = 2.403 mol * 18.015 g/mol
= 43.3 g
Learn more on stoichiometry here https://brainly.com/question/14935523
#SPJ1
How many grams in 5 moles of water?
Answer:
90g
Explanation:
Ans. 90 gram
we know that,
n = wt/m.wt
where, n= moles
wt.= weight
m.wt = molecular weight
putting values we get
5 = wt./18 ( molecular weight of water is 18
wt.= 90
hence ans.= 90 gram
Which of the following is an example of an environmental impact of
agriculture?
O high use of gold, copper, and silver
O high use of rock supplies
O high use of mineral resources
O high use of water
Ne
Answer:
B
self explanatory
Explanation:
1. To operate a batch reactor for converting A into R. This is a liquid phase reaction with the stoichiometry A → R. CA,(mol/l) 0.1 0.2 0.3 0.4 0.2 0.6 0.7 0.8 1.0 1.3 2.0 -rA,(mol/l min) 0.1 0.3 0.5 0.6 0.5 0.25 0.10 0.06 0.05 0.045 0.042 For the above data determine the order of reaction and rate constant.
The reaction is second order with a rate constant of 0.043 mol/l min.
How to explain the reactionFor CA = 0.1 mol/l, -rA = 0.1 mol/l min
For CA = 0.2 mol/l, -rA = 0.3 mol/l min
For CA = 0.3 mol/l, -rA = 0.5 mol/l min
For CA = 0.4 mol/l, -rA = 0.6 mol/l min
The slope of this line is equal to the order of the reaction (n), and the y-intercept is ln(k).
Slope = (0.6931 - (-2.3026)) / (0.3010 - (-0.9163)) = 1.929
ln(k) = -2.3026 + 1.929 * (-0.3010)
ln(k) = -3.1504
k = e^(-3.1504) = 0.043 mol/l min
The reaction is second order with a rate constant of 0.043 mol/l min.
Learn more about reaction on
https://brainly.com/question/11231920
#SPJ1
1. What is the percent of NaCl in a mixture that contains 23.5 g of NaCl and 212 g of water? Enter
answers in 2 decimal places
Answer:
9.98%
Explanation:
To find the percent of NaCl in the mixture, we need to divide the mass of NaCl by the total mass of the mixture, and then multiply by 100 to express it as a percentage.
Step 1: Find the total mass of the mixture
total mass = mass of NaCl + mass of water
total mass = 23.5 g + 212 g
total mass = 235.5 g
Step 2: Calculate the percent of NaCl
% NaCl = (mass of NaCl / total mass) x 100
% NaCl = (23.5 g / 235.5 g) x 100
% NaCl = 0.0997876857 x 100
% NaCl = 9.978768677%
% NaCl = 9.98%
Therefore, the percent of NaCl in the mixture is 9.98%.
Chemical equation for the formation of carbonic acid from the reaction of water with carbon dioxide
Answer: H2O + CO2 --> H2CO3
Explanation:
Water and Carbon Dioxide react to form Carbonic Acid
H2O + CO2 --> H2CO3
If 80 grams of KBr were dissolved in 100 grams of water at 35 degrees Celsius, which of these terms would best describe the solution
The term that would best describe the solution formed if 80g KBr dissolved in 100g water is unsaturated solution.
What is a saturated solution?A saturated solution is a solution with solute that dissolves until it is unable to dissolve anymore, leaving the undissolved substances at the bottom.
On the other hand, an unsaturated solution is that solution that is capable of dissolving more of a solute at the same temperature.
According to this question, 80 grams of KBr were dissolved in 100 grams of water at 35 degrees Celsius. This means that the solution is unsaturated because it can still dissolve more KBr.
Learn more about unsaturated solution at: https://brainly.com/question/18997806
#SPJ1
Efficient synthesis in 7 steps or less.
1) Bromination of propylene to form 2-bromopropane using NBS and a Lewis acid catalyst.
What is Bromination?Bromination is a chemical process in which bromine is added to a molecule. This can be done by either direct substitution or as a substitution reaction, allowing for the addition of one or more bromine atoms to the molecule. Bromination is a commonly used organic reaction, particularly in the laboratory, and can be used to alter the properties of a compound. It can also be used to produce a wide range of products, including aromatics and halogenated compounds. Bromination is particularly useful in pharmaceutical synthesis, as the products of this reaction often have desirable bioactivity.
2) Reduction of 2-bromopropane to 2-propanol using NaBH₄
3) Reaction of 2-propanol with phosphorus tribromide to form 2-bromopropanol
4) Alkylation of 2-bromopropanol with methyl iodide to form 2-bromopropyl methyl ether
5) Reduction of 2-bromopropyl methyl ether to 2-methoxypropane using NaBH₄
6) Reaction of 2-methoxypropane with phosphorus tribromide to form 2-bromo-2-methoxypropane
7) Reduction of 2-bromo-2-methoxypropane to Compound X using NaBH₄
To learn more about Bromination
https://brainly.com/question/24202507
#SPJ1
If you mix 30 mL of cold water with 70 mL of hot water in a calorimeter, then calculate that the cold water gained 142 J of heat and the hot water lost 181 J of heat, and the temperature change of the cold water (and calorimeter) was an increase in 1.93°C, then what is the heat capacity of the calorimeter in J/°C (only enter the number, not units, and assume that no heat was lost to the environment around the calorimeter, assume the density of water to be 1.00g/mL and specific heat capacity of water to be 4.184 J/g-°C)?
First, we need to calculate the heat gained by the cold water and the heat lost by the hot water:
Qcold = mcΔT = (30 g)(4.184 J/g-°C)(1.93°C) = 242.06 J
Qhot = mcΔT = (70 g)(4.184 J/g-°C)(-1.93°C) = -546.53 J
Since energy is conserved, we can assume that the heat gained by the cold water and calorimeter is equal to the heat lost by the hot water:
Qcold + Qcalorimeter = Qhot
Qcalorimeter = Qhot - Qcold
Qcalorimeter = -546.53 J - 242.06 J = -788.59 J
Therefore, the heat capacity of the calorimeter can be calculated as:
Ccalorimeter = Qcalorimeter / ΔT
Ccalorimeter = (-788.59 J) / (1.93°C)
Ccalorimeter ≈ -408.4 J/°C
Note that the negative sign indicates that the calorimeter loses heat when the system gains heat, which is expected since the calorimeter is absorbing some of the heat from the hot water.
Find the concentration of all ions present in a 0.223 M solution of PbCl2.
Answer:
Since that means that we have 0.223 moles of PbCl2 in 1000mL of solution.
Also since mole ratio of the ions Pb2+:Cl- is 1:2
Thus, moles of Pb2+ = 0.223moles
concentration of Pb2+= 0.223M
Moles of Cl- = 2x0.223 moles
Concentration of Cl- = 0.446M
Explanation:
A freezer is maintained at -7°C by removing heat from it at a rate of 80 kJ/min. The power input to the freezer is 0.5 kW, and the surrounding air is at 25°C. Determine (C) the second-law efficiency of this freezer
The second-law efficiency of this freezer is 94.7%.
What is the the second-law efficiency of a refrigerator?The second-law efficiency of a refrigerator or freezer is described as as the ratio of the desired cooling effect which is the heat removed from the cold reservoir) to the energy input required to achieve this cooling effect.
The second-law efficiency of a refrigerator formula is
η = Qc / W
we have the equation as
Qh = mCΔT = Qc
Tc = -7°C = 266 K
Th = 25°C = 298 K and
W = Qh / (1 - Tc/Th) = Qc / (1 - Tc/Th) = 3.3 W
we have found Qc = 3.125
W = 3.3 W
we then substitute into the second-law efficiency formula:
η = Qc / Wmin
η= 3.125 W / 3.3 W
η= 0.947 or 94.7%
Learn more about second-law efficiency at:
https://brainly.com/question/15025185
#SPJ1
VITAMIN C IN FRUIT JUICE
Why might it be difficult to use this method to determine the amount of Vitamin C in other fruit juices such as cranberry, blackcurrant, or pomegranate juice?
The method for determining the sum of Vitamin C in fruit juice ordinarily includes adding an indicator (such as DCPIP) to the juice test and titrating the test with a standard arrangement of ascorbic corrosive until the marker changes colour.
In any case, there are a few variables that seem to make this strategy troublesome to utilize for other natural product juices such as cranberry, blackcurrant, or pomegranate juice:
Interference with the indicator: A few natural product juices may contain compounds that are meddled with the marker and anticipate it from changing colour indeed when all the Vitamin C has been titrated. This may lead to wrong comes about.Presence of other reducing agents: Natural product juices may contain other diminishing operators other than Vitamin C, such as fructose or glucose, which can moreover respond with the marker and create wrong positive comes about.Differences in Vitamin C substance: Diverse natural products contain distinctive sums of Vitamin C, and the sum of Vitamin C in a specific juice can change depending on variables such as the readiness of the fruit and the handling strategy utilized. This will make it troublesome to compare the Vitamin C substance of diverse natural product juices utilizing the same strategy.Differences in pH: The pH of natural product juices can moreover change, and this could influence the solidness of Vitamin C and the precision of the titration strategy.In this manner, whereas the strategy for deciding the sum of Vitamin C in natural product juice can be a valuable apparatus, it may not be appropriate for all sorts of natural product juices and may have to be be adjusted or adjusted to account for these variables.
To learn more about VITAMIN C,
https://brainly.com/question/1165711
#SPJ1
Please help thanks!!!!!!!!!!!!!!!!!!
The correct ratio of components is: For every 3 moles of carbon dioxide produced, 5 moles of oxygen react.
This ratio can be derived directly from the balanced chemical equation:
C₃H₈ + 5O₂ → 3CO₂ + 4H₂O
The balanced equation shows that for every 3 moles of carbon dioxide produced, 5 moles of oxygen are required. This means that if we have a certain amount of propane, we need to use this ratio to determine the amount of oxygen needed for the reaction. Similarly, if we have a certain amount of oxygen, we can use this ratio to calculate the amount of carbon dioxide that will be produced.
It is important to note that the other ratios provided in the question are incorrect because they do not match the coefficients in the balanced chemical equation.
Therefore, the correct option is: for every 3 moles of carbon dioxide produced, 5 moles of oxygen react.
To learn more about balanced equation here
https://brainly.com/question/31242898
#SPJ1
You react 0.017 mol of solid metal with HCl in a coffee cup calorimeter (reaction shown below). The calorimeter has 100 mL of water in it, and the temperature of the water increases by 3.81°C. The calorimeter has a heat capacity of 40.4 J/°C. What is the enthalpy of the reaction in terms of kJ per mol of the metal (your answer should be NEGATIVE, remember to convert from J to kJ, specific heat capacity of water is 4.184 J/g-°C)?
M(s) + 2 HCl (aq) MCl2 (aq) + H2 (g)
M = metal
The enthalpy of the reaction is -94.1308 kJ/mol of the metal.
First, we need to calculate the amount of heat absorbed by the water in the calorimeter. We can use the formula:
q = m × C × ΔT
where q is the amount of heat absorbed by the water, m is the mass of the water, C is the specific heat capacity of water, and ΔT is the temperature change of the water.
q = 100 g × 4.184 J/g-°C × 3.81°C = 1601.304 J
Next, we need to calculate the amount of heat released by the reaction. We can use the formula:
q = n × ΔH
where q is the amount of heat released, n is the number of moles of the metal, and ΔH is the enthalpy change of the reaction.
We know that 0.017 moles of metal reacted, and we can assume that all the heat released by the reaction was absorbed by the water in the calorimeter.
Therefore:
q = n × ΔH
1601.304 J = 0.017 mol × ΔH
ΔH = 1601.304 J / 0.017 mol = 94130.8235 J/mol
Finally, we need to convert the answer from joules to kilojoules:
ΔH = 94130.8235 J/mol / 1000 J/kJ = -94.1308 kJ/mol
Learn more about enthalpy, here:
https://brainly.com/question/16720480
#SPJ1
A titration setup was used to determine the unknown molar concentration of a solution of NaOH. A1.2 M HCl solution was used as the
titration standard. The following data were collected.
Trial 1
Amount of HCI
Standard Used 10.0 mL
0.0 mL
Initial NaOH
Buret Reading
Final NaOH
Buret Reading 12.2 mL
Trial 2
10.0 mL
12.2 mL
23.2 mL
Trial 3 Trial 4
10.0 mL 10.0 mL
23.2 mL 35.2 mL
35.2 mL 47.7 mL
79) Calculate the volume of NaOH solution used to neutralize 10.0 ml. of the standard HCl solution in trial 3 in the given diagram.
[Show your work.]
For the reaction:
S8(s) + 8 O2(g)⟶8 SO2(g) ΔH = –2368 kJ
How much heat is evolved when 25.0 moles of sulfur is burned in excess oxygen?
The amount of heat evolved when 25 moles of Sulfur is burned in excess oxygen is -74000 kJ.
The balanced reaction is given that is:
[tex]S_8(s) + 8 O_2(g) \rightarrow 8 SO_2(g)[/tex]
We can see that 1 mole of [tex]S_8[/tex] reacts with 8 moles of [tex]O_2[/tex] to produce 8 moles of [tex]So_2[/tex].
If 25.0 moles of [tex]S_8[/tex] reacts with excess Oxygen, then the amount of [tex]O_2[/tex] which is required in the reaction will be:
8 moles [tex]O_2[/tex] / 1 mole S8 × 25.0 moles S8 = 200 moles [tex]O_2[/tex]
We can use the enthalpy change and calculate the amount of heat evolved:
[tex]\Delta H[/tex] = -2368 kJ/ 8 moles [tex]SO_2[/tex]
The heat evolved = [tex]\Delta H[/tex] × moles of [tex]SO_2[/tex] produced
Moles of [tex]SO_2[/tex] produced = 8 moles [tex]SO_2[/tex] / 1 mole [tex]S_8[/tex] × 25.0 moles [tex]S_8[/tex]
= 200 moles [tex]SO_2[/tex].
Therefore, Heat evolved= -2368 kJ/ 8 moles [tex]SO_2[/tex] × 200 moles [tex]SO_2[/tex]
= -74000 kJ
The amount of heat evolved when 25 moles of Sulfur is burned in excess oxygen is -74000 kJ, the negative sign here indicates that the reaction is exothermic.
Learn more about the enthalpy change at:
https://brainly.com/question/28873088
#SPJ1
A piece of iron at 408 grams is heated in a flame and is then plunged into a beaker containing 1.00 kg of water. The original temperature of the water was 20.0°C, but it was 32.8°C after the iron bar is dropped in. What was the original temperature of the hot iron bar?
Note: The specific heat of iron is 0.45 J/g °C.
Do not round your answer in the middle of the problem. Round at the very end.
Round your answer to the correct number of sig figs. Your units should be degrees Celsius.
the original temperature of the h ot iron bar was 327.9°C.
We can use the specific heat of iron to do this:
Q1 = m1 * C1 * (Ti - 32.8°C)
Q1 = 408 g * 0.45 J/g °C * (Ti - 32.8°C)
Q1 = 183.6 J/g °C * (Ti - 32.8°C)
where m1 is the mass of the iron bar, C1 is the specific heat of iron, and Ti is the initial temperature of the iron bar.
Next, let's calculate the heat gained by the cold water when it is heated from 20.0°C to 32.8°C:
Q2 = m2 * C2 * (32.8°C - 20.0°C)
Q2 = 1000 g * 4.184 J/g °C * (32.8°C - 20.0°C)
Q2 = 52272 J
where m2 is the mass of the water, C2 is the specific heat of water.
Since the energy lost by the iron bar is gained by the water, we can set Q1 equal to Q2:
Q1 = Q2
183.6 J/g °C * (Ti - 32.8°C) = 52272 J
Now, let's solve for Ti:
183.6 J/g °C * Ti - 60236.8 J = 0
183.6 J/g °C * Ti = 60236.8 J
Ti = 327.9°C
Therefore, the original temperature of the h ot iron bar was 327.9°C.
learn more about temperature here
https://brainly.com/question/26866637
#SPJ1
Joan wrote a science fiction story where the people only texted each other, and never talked. They still had vocal chords, but they could no
longer make sounds. Their vocal chords were
Answer:
Vestigial
Explanation:
The retention of genetically determined traits or structures that have partially or completely lost their ancestral purpose in a specific species is known as vestigiality. In most cases, evaluating the vestigality requires comparison with comparable traits in closely related species.
What is the molar mass of potassium hydroxide, KOH?
Answer:
56.11 g/mol
Explanation:
To determine the molar mass of potassium hydroxide, we need to find the atomic mass of each element in the compound and add them up.
The atomic mass of potassium (K) is 39.10 g/mol, the atomic mass of oxygen (O) is 16.00 g/mol, and the atomic mass of hydrogen (H) is 1.01 g/mol.
So, the molar mass of potassium hydroxide (KOH) is:
Molar mass of K = 39.10 g/mol
Molar mass of O = 16.00 g/mol
Molar mass of H = 1.01 g/mol
Molar mass of KOH = Molar mass of K + Molar mass of O + Molar mass of H
= 39.10 g/mol + 16.00 g/mol + 1.01 g/mol
= 56.11 g/mol
Therefore, the molar mass of potassium hydroxide (KOH) is 56.11 g/mol.
What is a solvent front?
Answer:
A solvent front is the point on a chromatography paper or plate where the solvent has reached the end of the stationary phase and has migrated as far as it can go. It is the farthest point reached by the solvent in the chromatography process.
Summarize the main challenges and constraints that engineers must overcome in the design of a low-cost, portable water purification system.
The primary difficulties in creating a low-cost, portable water purification system include assuring efficient pollution removal, compact design, durability etc.
In order to create a low-cost, portable water purification system, engineers must overcome several main obstacles and challenges, including: ensuring the removal of contaminants effectively; designing a compact and lightweight system; guaranteeing durability and reliability in harsh environments; providing an affordable, sustainable power source; and addressing cultural and social factors that may affect user acceptance and adoption.
To know more about water purification system, visit,
https://brainly.com/question/11523514
#SPJ1
Describe the technique for washing a precipitate. Place the steps in the correct order.
A. add deionized water
B. mix solutions
C. decant
D. centrifuge
Aqueous sulfuric acid (H₂SO₂) reacts with solid sodium hydroxide (NaOH) to produce aqueous sodium sulfate (Na₂SO) and liquid water (H₂O). What is the
theoretical yield of sodium sulfate formed from the reaction of 4.9 g of sulfuric acid and 5.0 g of sodium hydroxide?
Round your answer to 2 significant figures.
The theoretical yield of sodium sulfate, Na₂SO₄, formed from the reaction of 4.9 g of sulfuric acid, H₂SO₄ and 5.0 g of sodium hydroxide, NaOH is 7.1 g
How do i determine the theoretical yield?First, we shall determine the limiting reactant. This is shown below:
H₂SO₄ + 2NaOH -> Na₂SO₄ + 2H₂O
Molar mass of H₂SO₄ = 98 g/molMass of H₂SO₄ from the balanced equation = 1 × 98 = 98 g Molar mass of NaOH = 40 g/molMass of NaOH from the balanced equation = 2 × 40 = 80 gFrom the balanced equation above,
98 g of H₂SO₄ reacted with 80 g of NaOH
Therefore,
4.9 g of H₂SO₄ will react with = (4.9 × 80) / 98 = 4 g of NaOH
From the above calculation, we can see that only 4 g of NaOH out of 5 g is needed to react with 4.9 g H₂SO₄.
Thus, the limiting reactant is H₂SO₄
Finally, we shall determine theoretical yield of sodium sulfate, Na₂SO₄ formed. Details below:
H₂SO₄ + 2NaOH -> Na₂SO₄ + 2H₂O
Molar mass of H₂SO₄ = 98 g/molMass of H₂SO₄ from the balanced equation = 1 × 98 = 98 gMolar mass of Na₂SO₄ = 142 g/molMass of Na₂SO₄ from the balanced equation = 1 × 142 = 142 gFrom the balanced equation above,
98 g of H₂SO₄ reacted to produce 142 g of Na₂SO₄
Therefore,
4.9 g of H₂SO₄ will react to produce = (4.9 × 142) / 98 = 7.1 g of Na₂SO₄
Thus, the theoretical yield of sodium sulfate, Na₂SO₄ formed is 7.1 g
Learn more about theoretical yield:
https://brainly.com/question/30945491
#SPJ1
What mass (grams) of magnesium chloride would be formed by the compete reaction of 72.8 grams of magnesium?
Mg +FeCl2 --> Fe + MgCl2
Answer: 285.63g of MgCl2.
Explanation:
Very easy stiochemistry question. Use the dimensional analysis. For example 1 m x 100 cm / 1m and meters get canceled out and 1 m is 100 cm.
For the question, start with the given things. You know that it was started with 72.8 grams of magnesium. Convert it to molar mass (to use moles for comparison), and then find the mass of mg.
Both chairs are the same size and have the same number of molecules. The diagram above shows the chairs before they touch.
How does the temperature of the bottom chair compare with the temperature of the top chair before the chairs touch? What will happen after the chairs have been touching for a while?
Before the chairs touch, the temperature of the bottom chair is lower than the temperature of the top chair, this is because the molecules in the bottom chair are in contact with a cooler surface.
After the chairs have been touching for a while, the heat will begin to transfer from the top chair to the bottom chair through a process called conduction. This will continue until the temperature of the two chairs equalizes, at which point there will be no more net heat transfer between them.
The final temperature of both chairs will be somewhere between the initial temperatures of the two chairs, and will depend on factors such as the thermal conductivity of the material, the size of the chairs, and the duration of the contact.
To know more about the Molecules, here
https://brainly.com/question/2114821
#SPJ1
which type of mutation could have the most drastic effect
on a gene a chromosomal mutation? Back up your choice.
Answer:
we need to know the definitions of the two types of mutations:
A chromosomal mutation is a change in the structure or number of chromosomes, which are the structures that carry genes. Examples of chromosomal mutations are deletions, duplications, inversions, and translocations.A gene mutation is a change in the sequence of nucleotides, which are the building blocks of DNA and RNA. Examples of gene mutations are substitutions, insertions, and deletions.Looking at the definitions, we can see that a chromosomal mutation can affect many genes at once, while a gene mutation can affect only one or a few nucleotides. Therefore, a chromosomal mutation could have the most drastic effect on a gene, because it could alter or delete an entire gene or multiple genes, resulting in major changes in the phenotype or function of an organism. A gene mutation could also have significant effects on a gene, but it could also be silent or minor depending on the location and type of the mutation. Therefore, the answer is a chromosomal mutation. One possible way to back up this choice is to give an example of a chromosomal mutation that causes a genetic disorder, such as Down syndrome or Turner syndrome.
At some constant temperature, the equilibrium constant for the reaction below is Kc = .76. An empty 1.00L flask is charged with 2.00 mol carbon tetrachloride and then allowed to reach equilibrium.
CCl4(g) ⇌ C (s) + 2 Cl2(g)
a. What fraction of the reactant remains at equilibrium?
b. What is the molarity of chlorine gas at equilibrium?
At some constant temperature, the equilibrium constant for the reaction below is Kc = .76. An empty 1.00L flask is charged with 2.00 mol carbon tetrachloride and then allowed to reach equilibrium. CCl4(g) ⇌ C (s) + 2 Cl2(g)
a. To find the fraction of the reactant (CCl4) remaining at equilibrium, we can start by determining the initial concentration of CCl4:
Initial concentration of CCl4 = moles/volume = 2.00 mol / 1.00 L = 2.00 M
Let x be the change in concentration of CCl4 at equilibrium. Then, the equilibrium concentrations are:
[CCl4] = 2.00 - x
[Cl2] = 2x
The equilibrium constant expression is given by:
Kc = [Cl2]^2 / [CCl4]
Plugging in the given Kc value (0.76) and the equilibrium concentrations:
0.76 = (2x)^2 / (2.00 - x)
Now, you can solve for x. The fraction of the reactant remaining at equilibrium is (2.00 - x) / 2.00.
b. To find the molarity of chlorine gas (Cl2) at equilibrium, you can use the value of x obtained in part (a). The molarity of Cl2 is equal to 2x.
For more questions on: temperature
https://brainly.com/question/27944554
#SPJ11
Which statement can be supported by using a position-time graph?
O A negative slope results when an individual is moving away from the origin.
O A horizontal line on the graph means the individual is moving at a non-zero velocity.
O A positive slope results when an individual is moving away from the origin.
O The speed of an individual cannot be determined from this type of graph.
4
Answer:
A position-time graph can support the statement that a positive slope results when an individual is moving away from the origin. This is because a positive slope on a position-time graph represents a positive velocity, which means that the object is moving in a positive direction (away from the origin). Conversely, a negative slope would indicate that the object is moving in a negative direction (towards the origin).
Option A and B are incorrect. A negative slope on a position-time graph indicates that the object is moving towards the origin, not away from it. A horizontal line on a position-time graph indicates that the object is not moving at all (velocity is zero), not moving at a non-zero velocity.
Option D is also incorrect. The speed of an individual can be determined from a position-time graph by calculating the slope of the graph at any point, which gives the velocity (speed and direction) of the individual at that point..
mark me brilliant
What is the mass (in g) of a solid piece of iron which has a specific heat of 0.449 J/g°C if when it absorbed 948.0 J of heat the temperature rose from 24.0°C to
82.1°C? Give your answer in 3 sig figs.
Answer:
Explanation:
We can use the formula:
q = mcΔT
where q is the heat absorbed, m is the mass, c is the specific heat, and ΔT is the change in temperature.
Given:
specific heat of iron (c) = 0.449 J/g°C
initial temperature (T1) = 24.0°C
final temperature (T2) = 82.1°C
heat absorbed (q) = 948.0 J
Substituting the given values into the formula, we get:
q = mcΔT
948.0 J = m(0.449 J/g°C)(82.1°C - 24.0°C)
948.0 J = m(0.449 J/g°C)(58.1°C)
m = 948.0 J ÷ (0.449 J/g°C × 58.1°C)
m = 33.1 g
Therefore, the mass of the iron piece is 33.1 g (to three significant figures)
