What is the number of moles in 4.20 kg of carbon dioxide

The error caused will lower the number of moles when he did not do the second heating.This question is related to the empirical formula.

A formula giving the proportions of the elements present in a compound but not the actual numbers or arrangement of atoms.

The empirical formula is the simplest ratio of atoms in a given compound.

we know that heating is used to eliminate most of the water molecules which are attached to the compound in the question, it's given that the second heating was not performed by the students.

This means that there are still some water molecules attached to the compound. This will imply that higher mass will be calculated for the compound because the water molecules are also considered.

So now, if we look at the calculation for the number of moles of water in this, we can say that this will be lower than the actual amount.

This is because there are some unaccounted moles of water which are still attached to the compound and these will be accounted in the compound mass rather than the waters. Therefore, the number of moles will be lower.

Hence, The error caused will lower the number of moles when he did not do the second heating.

Learn more about Empirical formula here ;

https://brainly.in/question/32699671

#SPJ1

2 moles of ZnO are produced if 1 mole of Zn and 2 moles of [tex]O_2[/tex] is required.

A mole is defined as 6.02214076 × [tex]10^{23}[/tex] of some chemical unit, be it atoms, molecules, ions, or others. The mole is a convenient unit to use because of the great number of atoms, molecules, or others in any substance.

Balanced equation:

[tex]2 Zn + O_2[/tex] → [tex]2 ZnO[/tex]

For 2 moles of Zinc, we need 1 mol of Oxygen to produce 2 moles of Zinc oxide

For 1 mole Zn, we need 2 mol [tex]O_2[/tex] to produce 2 moles ZnO only.

Hence, 2 moles ZnO is produced.

Learn more about moles here:

https://brainly.com/question/8455949

#SPJ1

Answer:

element.....

it is in the periodic table

Answer:

c) oil and vinegar

Explanation:

A heterogeneous mixture is a mixture that does not have a "uniform composition" (meaning that the entire mixture is not thoroughly mixed to be the exact same. In different parts of the mixture, there is a              non-consistent / differing composition.)

Oil and vinegar, as you may know, do not thoroughly mix when put together--different parts of the mixture are made of different compositions. Some parts are made of oil, and some are a concentration of vinegar, but because they are not able to be mixed entirely, the mixture is considered a heterogeneous mixture. If you were to take different samples of different parts of the liquid, you would have a clear separation of oil and vinegar.

Milk is thoroughly milk--if you take out a tablespoon, it will be milk entirely--and it will have the same composition as all of the other milk in the bottle.

Air is complicated--and it can be described as either, but the question was likely intending the answer of oil and vinegar.

Vinegar and water do thoroughly mix. Vinegar absorbs water on a molecular level, so the mixture is thoroughly mixed when put together.

(Hope this helps!)

The materials that would float in a molten vat of lead are glass and charcoal.

Glass and charcoal are the materials that would float in a molten vat of lead because they are less denser than the lead solution while on the other hand, platinum and gold get drowned into the solution because of its high density as compared to lead.

So we can conclude that the materials that would float in a molten vat of lead are glass and charcoal.

Learn more about density here: https://brainly.com/question/14997726

#SPJ1

Answer:

Make life easy for your customers and they are more likely to come back and buy again.

Explanation:

For example, you have to hire the right talent. You don't want somebody on the job that doesn't know how to do anything.

Lead will have the highest temperature .

What is Specific Heat ?

Specific Heat is defined as the amount of heat required to raise the temperature of a 1 gm of substance by 1 degree Celsius.

If heat is added to 25.0g of copper, calcium, aluminum, iron, lead

The missing given specific heat is

Copper, 0.377

Calcium, 0.656

Aluminum, 0.895

Iron, 0.448

Lead, 0.129

Higher specific heat means more temperature required to bring the same amount of change in temperature

Here the temperature change is fixed , The metal with the lowest Specific heat will have the highest temperature.

From the data it can be seen that

Specific Heat of Lead, 0.129

Therefore Lead will have the highest temperature.

To know more about Specific Heat

https://brainly.com/question/11297584

#SPJ1

The data shown in the Sample of Elements table can be arranged on basis of physical and chemical properties , atomic number , atomic weight , etc .

The data shown in the Sample of Elements table can be arranged in various ways :

Learn more about Sample of Elements table here https://brainly.com/question/15987580

#SPJ10

Carbon dioxide + Water Glucose (sugar) + Oxygen CO2 + H2O C6H12O6 + 6O2 Cellular respiration or aerobic respiration is a series of chemical reactions which begin with the reactants of sugar in the presence of oxygen to produce carbon dioxide and water as waste products.

Answer:

Sickle cell anemia

Explanation:

is an inherited genetic abnormality of hemoglobin (the oxygen-carrying protein found in red blood cells) characterized by sickle (crescent)-shaped red blood cells and chronic anemia caused by excessive destruction of the abnormal red blood cells.

Answer:

Sickle cell

Explanation:

I just took the test and it was correct.

C. Double replacement

cations and anions switch places

Answer:

6.022 x 10²³

Explanation:

The number of atoms =  the number of moles x with the Avogadro's number.

(The Avogadro's number is 6.022 x 10²³ atoms / moles)

number of atoms = 1.00 moles x 6.022 x 10²³ atoms / mole

number of atoms =  6.022 x 10²³ atoms

(There is no need to simplify?) = 6.022 x 10²³

(ps. This is my first time doing this question so im sorry if i got it wrong

(つ﹏⊂)

Answer:

64

Explanation:

ieijkjkjjsjsjsjsjsjskskakskskskskkkdksksjdjdjdjdjdjdjdjdndndndmdndndmdmdndndndjdjdjdjdjdkdkekrk

Answer:

1.05 mols of O2 gas

Explanation:

For this type of problem, it's important to understand what the balanced Chemical equation tells us:

Let's look at the balanced chemical equation:

[tex]2Mg(s)+O_2(g)-- > 2MgO(s)[/tex]

This equation two sides of the reaction arrow.  On the left are the reactants (things you start with, and that react during the chemical reaction), and on the right side are products (things that are produced during the chemical reaction that you end with).

The numbers in front of each compound tell how many of molecules are involved for a full reaction without anything left over.  A "mol" is a large quantity ([tex]6.022*10^{23}[/tex]), in this case, of molecules , since it's unlikely you're only taking a single molecule of each substance (it would be so tiny, you wouldn't even know you were doing the reaction).

So,for every 2 moles of Magnesium used, we'll also need 1 mole of Oxygen, and it will produce 2 moles of Magnesium Oxide.

In a way, during the reaction it's almost like 2 moles of Magnesium is equal to 1 mole of Oxygen and is equal to 2 moles of Magnesium Oxide:

[tex]2 mol Mg(s)=1mol O_2(g)=2molMgO(s)[/tex]

From here, we can build some unit ratios, to convert between the known quantity of moles we have, and find the unknown quantity of moles that are requested.

We know that we are looking at 2.10 mol of Magnesium, so we want a unit ratio with moles of Mg on the bottom.  We want to find moles of O2, so we want a unit ratio of moles of O2 on top.

The unit ratio we want is the middle part of the equation, divided by the left part of the equation.

[tex]2 mol Mg(s)=1mol O_2(g)\\\frac{2 mol Mg(s)}{2 mol Mg(s)}=\frac{1mol O_2(g)}{2 mol Mg(s)}\\1=\frac{1mol O_2(g)}{2 mol Mg(s)}[/tex]

Since this quantity is 1, it is a unit ratio and can be multiplied to other things to change their units (for this problem).

Starting with what we know, and multiplying by our unit ratio:

[tex]2.10 mol Mg(s)*\frac{1mol O_2(g)}{2 mol Mg(s)}=1.05mol O_2(g)[/tex]

Notice that the units from the first quantity cancel with the units on the bottom of the fraction, leaving only the unit on top of the fraction ... the exact units we wanted!

So, 1.05mols of O2 would be consumed during the reaction if exactly 2.10moles of Magnesium are burned.

The balanced equation for this reaction is [tex]3\text{CO}+\text{Fe}_{2}\text{O}_{3} \longrightarrow 2\text{Fe}+3\text{CO}_{2}[/tex].

This means that for every mole of iron(III) oxide consumed, 3 moles of carbon monoxide are consumed.

This means that iron(III) oxide has a formula mass of 2(55.845)+3(15.999)=g/mol, and thus 318 g is equal to [tex]\frac{318}{159.687}=1.9913956677751 \text{ mol}[/tex].

So, this means we need [tex]3(1.9913956677751)=5.9741870033253 \text{ mol}[/tex] of CO.

This means CO has a formula mass of 12.011+15.999=28.01 g/mol, and thus 5.9741870033253 moles have a mass of (28.01)(5.9741870033253), which is equal to about 167 g (to 3 sf)

Answer:

5.96 * 10^23 molecules

Explanation:

Don't start counting up the number of CsHsNs and Os there are Counting up the atom ions will get a wrong answer.  The question is asking for the number of molecules. That means you do not break down each molecule to  find the number of molecules. You modify 1 mol to find out how many molecules are in 0.99 mols. Do that using a proportion.

1 mol contains 6.01 * 10^23 molecules

0.99 mol contains x

1/0.99 = 6.02 * 10^23 / x molecules

x = 0.99 * 6.02 * 10^23

x = 5.96 * 10^23

Answer: The concentration of lead nitrate Pb(NO3)2 in a 0.726 M solution is 0.755 molal.

Explanation:

Given:

The molar mass of Pb(NO3)2 is 331.2 g/mol

Assuming 1 litre of solution.  This would equal 1202 g of solution

In the one litre of solution, you have 0.726 mol Pb(NO3)2

0.726 mol (331.2 g/mol) = 240.5 g Pb(NO3)2

Mass of water in 1 L of solution = 1202 g - 240.5 g = 961.5 g = 0.9615 kg

Molality = mols of solute / kg of solvent

= 0.726 mol / 0.9615 kg

= 0.755 m Pb(NO3)2

Answer:

I think D is the answer. The others can't be answer. Specially B and D can't be the answer.

Answer:

cysteine is HOOC-CH--CH₂-SH

reaction with Naoh

HOOC-CH--CH₂-SH + Naoh ---->oh-oNH2-oh + H2o

Answer:

B

Explanation:

A meter stick measures distances ( like centimeters)   so....B  

  it does NOT measure mass , volume or VERY large distances (Like earth's diameter)

The quantity could best be measured with a meter stick will be "the width of a wooden block".

The measurement tool is known as a "meter stick" would be used to measure objects in meters and millimeters.

A single new piece of wood would be used to create a miniature slit drum known as a wood block.

An instrument for measuring lengths in meters and centimeters is a meter stick, which measures one meter (hundred centimeters). A meter stick can be used to measure things such as the width of a bag or the length of a table.

The quantity that could best be measured with a meter stick will be "the width of a wooden block".

Therefore, the correct answer will be an option (b)

To know more about meter stick.

https://brainly.com/question/15298079

#SPJ3

Taking into account the reaction stoichiometry, the mass of silver(I) chloride formed is 930.37 grams.

In first place, the balanced reaction is:

2 AgNO₃ + BaCl₂ → 2 AgCl + Ba(NO₃)₂

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

Then, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

AgNO₃: 2 moles ×169.87 g/mole= 339.74 grams

BaCl₂: 1 mole ×208.24 g/mole= 208.24 grams

AgCl: 2 moles ×143.32 g/mole= 286.64 grams

Ba(NO₃)₂: 1 mole×261.34 g/mole= 261.34 grams

The following rule of three can be applied:  if by reaction stoichiometry 208.24 grams of barium chloride form 286.64 grams of silver(I) chloride, 675.9 grams of barium chloride form how much mass of silver(I) chloride?

[tex]mass of silver(I) chloride=\frac{675.9 grams of barium chloride x286.64 grams of silver(I) chloride }{208.24 grams of barium chloride}[/tex]

mass of silver(I) chloride= 930.37 grams

Finally, the mass of silver(I) chloride formed is 930.37 grams.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

#SPJ1

Answer:

12.42 g

Explanation:

because I saw your laptop so it is

Different atoms and elementary particles have varied masses. Therefore, 12.42 g is the Mass of the Water.

A body's mass is an inherent quality. Before the invention of the atom or particle physics, it was widely considered to be tied to the amount of matter inside a physical body. It was discovered that, despite having the same quantity of matter in theory, different atoms and elementary particles have varied masses.

There are various conceptions of mass in contemporary physics that are theoretically different but physically equivalent. The resistance of the body to acceleration in the presence of a net force can be measured experimentally as mass. 12.42 g is the Mass of the Water.

Therefore, 12.42 g is the Mass of the Water.

To know more about mass, here:

https://brainly.com/question/28704035

#SPJ5

Answer: 50.806 cm is the correct answer.

Explanation: First divide 6104.5 cm^2 by 22.3 cm.

[tex]\frac{6104.5cm^2}{22.3cm} = 273.74 cm[/tex]

*Note: When dividing units, subtract the exponents, and when multiplying units simply add the exponents.

Then continue by subtracting 324.55 cm - 273.74 cm.

This should give you an answer of 50.806 cm.

Compared to infrared radiation, an electromagnetic wave that has a lower frequency will also have a longer wavelength and equal speed

Electromagnetic waves or EM waves are waves that are created as a result of vibrations between an electric field and a magnetic field.

It can be also defined as waves are composed of oscillating magnetic and electric fields.

One important feature fo electromagnetic radiation is that all have the same speed in vacuum, c, in vacuum, which is the speed of light.

Since, the speed, wavelength and frequency of the waves are related you can infere any of them when the other two are known.

The equation is:

speed = frequency × wavelength

   s     =          ν        ×      λ

   c     =          ν        ×      λ      . . . for the specific case of electromagnetic radiation

That inverse relation between frequency and wavelength, where the speed is the constant, shows that the lower the frequency the longer the wavelength.

Therefore,  the correct statment is that an an electromagnetic wave that has a lower frequency will also have a longer wavelength and equal speed (option B).

Learn more about Electromagnetic wave here ;

https://brainly.com/question/3101711

#SPJ1

The types of bonds and atoms in the molecule shown below are C. Single bonds, double bonds, carbon atoms, and hydrogen atoms.

Carbon can only form a bond with a maximum of 4 other molecules.

We have been given a molecule

H₂C               CH₂-CH3

       C=C

H                H

In the given figure we can see that the molecule includes one double bond and other are single bonds.

Thus, The types of bonds and atoms in the molecule shown below are C. Single bonds, double bonds, carbon atoms, and hydrogen atoms.

Learn more about bonds;

https://brainly.com/question/17930825

#SPJ1

Option (b) is correct.

​​​

          A separation technique called filtration is used to isolate pure chemicals from mixtures of particles, some of which are big enough to be caught by a porous medium.

         The separation of combinations of two or more pure liquids is accomplished through distillation. The components of a liquid mixture are vaporized, then condensed and isolated during the purifying process of distillation.

          Chromatography is the process of separating a mixture by passing it through a medium where the components move at various speeds, either in solution, suspension, or as a vapor (as in gas chromatography).

         The magnetic separation process involves attracting magnetic materials using a magnet to separate the components of mixes. Non-magnetic compounds are separated from magnetic ones using the magnetic separation technique.

From the above separation techniques, we can say that option(b) Distillation a separation process that uses boiling points to separate the component of a mixture is correct.

To know more about the separation technique refer to:-

https://brainly.com/question/24645716

#SPJ10

Explanation:

it applies to pressure laws

Answer: A. Wearing loose comfortable clothing so you can concentrate on the lab.

Explanation:

Wearing loose clothing can make it cling onto certain things, which could create a spill or a different hazard. B, C, and D are all things you SHOULD be doing to achieve safe lab behavior.

I hope this helps! Pls give brainliest!! :)