What is the molar mass of a compound if a gaseous sample has a density of 0.978 g/L at 30 °C and 615 torr? The temperature in Celsius is known to two significant figures.

Answer: They have eight outer electrons.

Explanation: They don't need any more electrons to be added to them and can't give out any electrons to other groups. They have a complete outer shell.

Since the ΔH for the given reaction has negative value, the reaction is exothermic reaction.

A reaction that is exothermic is one in which power is given off as heat or light. In contrast to an endothermic process, which draws energy from its surroundings, an exothermic reaction transfers energy into the environment. The alteration in enthalpy (H) during an exothermic reaction will be negative. Since the ΔH for the given reaction has negative value, the reaction is exothermic reaction.

To know more about exothermic reaction, here:

https://brainly.com/question/10373907

#SPJ1

The energy difference of an electron's transition from n = 6 to n = 1 in a hydrogen atom is approximately -2.17 × 10⁻¹⁸ Joules.

To calculate the energy difference (deltaE) of an electron's transition from n = 6 to n = 1 in a hydrogen atom, we can use the following equation:

deltaE = -13.6 * (1/n_final^2 - 1/n_initial^2) eV
where n_initial is the initial energy level (6 in this case), n_final is the final energy level (1 in this case), and -13.6 eV is the ionization energy of hydrogen.

Converting eV to Joules, we get:
1 eV = 1.602 x 10^-19 J
Therefore, deltaE in Joules can be calculated as follows:
deltaE = -13.6 * (1/1^2 - 1/6^2) * 1.602 x 10^-19 J/eV
deltaE = -2.179 x 10^-18 J

Therefore, the energy difference (deltaE) of an electron's transition from n = 6 to n = 1 in a hydrogen atom is -2.179 x 10^-18 J.

To calculate the energy difference (ΔE) for an electron's transition from n = 6 to n = 1 in a hydrogen atom, you can use the following formula:
ΔE = -13.6 eV * (1/nf² - 1/ni²)

Where ΔE is the energy difference in electron volts (eV), nf is the final energy level (1 in this case), and ni is the initial energy level (6 in this case).
ΔE = -13.6 eV * (1/1² - 1/6²)
ΔE ≈ -13.56 eV

Now convert electron volts to Joules:
1 eV = 1.6 × 10⁻¹⁹ J
ΔE ≈ -13.56 eV * 1.6 × 10⁻¹⁹ J/eV
ΔE ≈ -2.17 × 10⁻¹⁸ J

So,  approximately -2.17 × 10⁻¹⁸ Joules is  the energy difference of an electron's transition from n = 6 to n = 1 in a hydrogen atom.

For more question on energy difference

https://brainly.com/question/30951970

#SPJ11

The ΔG value for the reaction A (aq) + B (aq) → C(aq) at 25 °C and the given concentrations is -8.35 kJ/mol.

The relationship between ΔG and K is given by the following equation:

ΔG = -RTln(K)

where R is the gas constant (8.314 J/(mol·K)), T is the temperature in Kelvin (25 °C = 298.15 K), and ln denotes the natural logarithm.

To calculate K, we need to use the equilibrium expression and the given concentrations:

[tex]K = [C]/([A][B])[/tex]

[tex]K = (5.00 * 10^{-5} M)/((1.50 M)(1.00 M))[/tex]

[tex]K = 3.33 x 10^{-5}[/tex]

Now we can substitute the values for R, T, and K into the equation for ΔG:

ΔG = -RTln(K)

ΔG = [tex]-(8.314 J/(mol.K))(298.15 K)ln(3.33 x 10^{-5})[/tex]

ΔG = -8.35 kJ/mol

Therefore, the ΔG value for the reaction A (aq) + B (aq) → C(aq) at 25 °C and the given concentrations is -8.35 kJ/mol.

Learn more about Concentrations at

brainly.com/question/13872928

#SPJ1

Answer:

Explanation:

Coal deposits have been found in Antarctica, particularly in the Transantarctic Mountains where they are interbedded in sedimentary rocks of the flat-lying Beacon Supergroup. The presence of coal in Antarctica supports Wegener's continental drift hypothesis because it suggests that Antarctica was once part of a larger landmass that had a warm climate suitable for the formation of coal. Coal is formed from ancient plant matter that has been compressed and heated over millions of years. The presence of coal in Antarctica suggests that the continent was once located closer to the equator and had a climate that supported lush vegetation.

The partial pressure of the oxygen is 0.236 atm.

The pressure that one gas component in a mixture of gases exerts is known as partial pressure. It is the pressure that the gas would experience if it took up the same amount of space in the mixture at the same temperature on its own.

We know that;

P[tex]CO_{2}[/tex] = 0.285 torr or 0.000375 atm

P[tex]N_{2}[/tex] = 580.502 torr or 0.764 atm

P[tex]O_{2}[/tex] = ?

Total pressure = 1 atm

Then we have that;

PT =P[tex]CO_{2}[/tex]  +P[tex]N_{2}[/tex]+ P[tex]O_{2}[/tex]

P[tex]O_{2}[/tex] = PT - (P[tex]CO_{2}[/tex]  + P[tex]N_{2}[/tex])

P[tex]O_{2}[/tex] = 1 - (0.000375  + 0.764)

P[tex]O_{2}[/tex]= 0.236 atm

Learn more about partial pressure:https://brainly.com/question/31214700

#SPJ1

The ΔH°vap of water at the critical point is approximately 0.04614 kJ/mol.

To calculate the ΔH°vap (enthalpy of vaporization) of water at the critical point, we can use the Clausius-Clapeyron equation;

ln(P₂/P₁) = ΔH°vap/R [1/T₁ - 1/T₂]

where P₁ and T₁ are the pressure and temperature at which the enthalpy of vaporization is known (usually at standard conditions of 1 atm and 100 °C), P₂ and T₂ are the pressure and temperature at the critical point, ΔH°vap is the enthalpy of vaporization, and R is the gas constant (8.314 J/mol∙K).

Using the given values, we can plug them into the equation and solve for ΔH°vap;

ln(3.2 atm / 1 atm) = ΔH°vap / R [1/373 K - 1/275 K]

Simplifying;

ln(3.2) = ΔH°vap / R [0.0026819]

ΔH°vap / R = ln(3.2) / 0.0026819

ΔH°vap / R = 5.552

Multiplying both sides by R:

ΔH°vap = 5.552 x R

ΔH°vap = 5.552 x 8.314 J/mol∙K

ΔH°vap = 46.14 J/mol

Converting to kJ/mol;

ΔH°vap = 0.04614 kJ/mol

Therefore, the ΔH°vap of water is 0.04614 kJ/mol.

To know more about enthalpy of vaporization here

https://brainly.com/question/7311854

#SPJ1

The volume of oxygen gas, O₂ collected at 1.05 atm pressure and 44.0 °C when 42.5 g of KClO₃ decomposed is 13.01 L

We shall begin by obtaining the mole in 42.5 g of KClO₃. Details below:

Mole = mass / molar mass

Mole of CaC₂ = 42.5 / 122.5

Mole of CaC₂ = 0.35 mole

Next, we shall determine the mole of oxygen gas, O₂. produced. Details below:

2KClO₃ -> 2KCl + 3O₂

From the balanced equation above,

2 moles of KClO₃ decomposed to produced 3 mole of O₂

Therefore,

0.35 mole of KClO₃ will decompose to produce = (0.35 × 3) / 2 = 0.525 mole O₂

Finally, we shall determine the volume of oxygen gas, O₂ collected. Details below:

PV = nRT

1.05 × V = 0.525 × 0.0821 × 317

Divide both sides by 1.05

V = (0.525 × 0.0821 × 317) / 1.05

Volume of oxygen gas = 13.01 L

Learn more about volume:

https://brainly.com/question/21838343

#SPJ1

Interpreting Data:

Predicting:

Joshua's brother has a 50% chance of being a carrier for cystic fibrosis (Nn) and a 50% chance of having the normal genotype (NN). This is because Joshua's parents are both carriers, so each of their children has a 50% chance of inheriting the recessive allele.

Communicating:

As a genetic counselor, information about many generations of a family is needed to draw conclusions about a hereditary condition because traits are passed down from generation to generation. By studying the family history, we can identify patterns of inheritance and determine the likelihood that a person has inherited a certain trait. This information can help us make informed decisions about genetic testing and treatment options.

Additionally, knowing the family history can help us determine the risk of passing on a genetic condition to future generations.

Find out more on pedigree here: https://brainly.com/question/14525981

#SPJ1

Image transcribed and complete question:

Family Puzzle

Problem

A husband and wife want to understand the probability that their children might inherit cystic fibrosis. How can you use the information in the labeled Case Study to predict the probability?

Skills Focus

interpreting data, predicting

Materials

12 index cards

scissors marker

Procedure

1. Read the Case Study. In your notebook, draw a pedigree that shows all the family members. Use circles to represent the females, and squares to represent the males. Shade in the circles or squares representing the individuals who have cystic fibrosis.

2. You know that cystic fibrosis is controlled by a recessive allele. To help you figure out Joshua and Bella's family pattern, create a set of cards to represent the alleles. Cut each of six index cards into four smaller cards. On 12 of the small cards, write N to represent the dominant normal allele. On the other 12 small cards, write n for the recessive allele.

Case Study:

Joshua and Bella

• Joshua and Bella have a son named lan. lan has been diagnosed with cystic fibrosis.

⚫ Joshua and Bella are both healthy.

• Bella's parents are both healthy.

• Joshua's parents are both healthy. • Joshua's sister, Sara, has cystic fibrosis.

Analyze and Conclude

Write your answers in the spaces provided.

1. Interpreting Data What were the genotypes of Joshua's parents? What were the genotypes of Bella's parents?

2. Predicting Joshua also has a brother. What is the probability that he has cystic fibrosis? Explain.

3. Communicating Imagine that you are a genetic counselor. A couple asks why you need information about many generations of their families to draw conclusions about a hereditary condition. Write an explanation you can give to them.

More to Explore

Review the pedigree that you just studied. What data suggest that the traits are not sex-linked? Explain.

Answer:

Explanation:

Both 2CH4 and C2H8 have the same number and kind of elements. But practically, 2CH4 will be existing but C2H8 cannot exist.

There are 3 bonding pairs and 7 lone pairs of electrons in N2.

An atom's nucleus is orbited by an electron, a subatomic particle with a negative charge. Along with protons and neutrons, it is one of the elementary particles that make up matter. The mass of an electron is exceedingly small, it is roughly 1/1836 that of a proton.

To determine the number of lone pairs of electrons in N2, we need to subtract the number of bonding pairs from the total number of valence electrons:

Number of lone pairs = Total number of valence electrons - Number of bonding pairs

Number of lone pairs = 10 - 3

Number of lone pairs = 7

Therefore, there are 3 bonding pairs and 7 lone pairs of electrons in N2.

Learn more  on covalent bonds here https://brainly.com/question/3447218

#SPJ1

1. The volume of 0.350 M NH₄I solution is required is 286 mL

2. The mole of PbI₂ formed is 0.0498

First, we shall determine the mole in 415 mL of 0.120 M Pb(NO₃)₂. Details below:

Mole = molarity × volume

Mole of Pb(NO₃)₂ = 0.120 × 0.415

Mole of Pb(NO₃)₂ = 0.0498 mole

Next, we shall determine the mole of NH₄I that reacted. Details below:

Pb(NO₃)₂(aq) + 2NH₄I(aq) ⟶ PbI₂(s) + 2NH₄NO₃(aq)

From the balanced equation above,

1 moles of Pb(NO₃)₂ reacted with 2 moles of NH₄I

Therefore,

0.0498 mole of Pb(NO₃)₂ will react with = 0.0498 × 2 = 0.1 mole of NH₄I

Finally, we shall determine the volume of NH₄I required for the reaction. Details below:

Volume = mole / molarity

Volume of NH₄I = 0.1 / 0.350

Volume of NH₄I = 0.286 L

Multiply by 1000 to express in mL

Volume of NH₄I = 0.286  × 1000

Volume of NH₄I = 286 mL

The mole of PbI₂ formed can be obtain as follow:

Pb(NO₃)₂(aq) + 2NH₄I(aq) ⟶ PbI₂(s) + 2NH₄NO₃(aq)

From the balanced equation above,

1 mole of Pb(NO₃)₂ reacted to produced 1 mole of PbI₂

Therefore,

0.0498 mole of Pb(NO₃)₂ will also react to produce 0.0498 mole of PbI₂

Thus, the number of mole of PbI₂ formed is 0.0498 mole

Learn more about mole produced:

https://brainly.com/question/13375719

#SPJ1

The hydrocarbon's molecular structure is [tex]C_9H_20[/tex].The hydrocarbon's empirical formula is [tex]C_9[/tex]/4H5.

To solve this problem, we need to use stoichiometry to relate the amount of [tex]CO__2[/tex] and [tex]H_2O[/tex] produced to the amount of [tex]CxHy[/tex] burned.

(a) To find the molecular formula of the hydrocarbon, we need to first calculate the number of moles of [tex]CO__2[/tex] and [tex]H_2O[/tex] produced. From the ideal gas law, we know that 1 mole of gas at STP (standard temperature and pressure) occupies 22.4 L. Therefore, 4.032 L of [tex]CO__2[/tex] at STP corresponds to:

4.032 L / 22.4 L/mol = 0.180 mol [tex]CO__2[/tex]

Similarly, the mass of H2O produced corresponds to:
3.602 g / 18.02 g/mol = 0.200 mol [tex]H_2O[/tex]

Since the hydrocarbon undergoes complete combustion, it reacts with oxygen to form [tex]CO__2[/tex] and [tex]H_2O[/tex] according to the balanced chemical equation:

[tex]CxHy[/tex] + (x + (y/4))O2 → [tex]CO__2[/tex] + (y/2)[tex]H_2O[/tex]
where x and y are the coefficients of the balanced equation. We can use the stoichiometric ratios to set up two equations:

0.180 mol [tex]CO__2[/tex] = x mol [tex]CxHy[/tex] → x = 0.180 mol / 0.0200 mol = 9
0.200 mol [tex]H_2O[/tex] = (y/2) mol [tex]CxHy[/tex] → y = 0.400 mol / 0.0200 mol = 20

Therefore, the molecular formula of the hydrocarbon is [tex]C_9H_20[/tex].
(b) To find the empirical formula of the hydrocarbon, we need to divide the subscripts by their greatest common factor. In this case, both subscripts are divisible by 4, so we get:

[tex]C_9H_20[/tex] → C9/4H5
Therefore, the empirical formula of the hydrocarbon is C9/4H5.

For more question on molecular

https://brainly.com/question/24191825

#SPJ11

We can use the combined gas law to determine the pressure of the gas at the final state. The combined gas law relates the pressure, volume, and temperature of a gas:

(P1 x V1) / T1 = (P2 x V2) / T2

where P1, V1, and T1 are the pressure, volume, and temperature of the gas at the initial state, and P2, V2, and T2 are the pressure, volume, and temperature of the gas at the final state.

We are given the initial pressure (P1 = 1.01 atm), volume (V1 = 2.31 L), and temperature (T1 = 279 K) of the gas, and the final volume (V2 = 1.09 L), and temperature (T2 = 308 K) of the gas. We can solve for P2, the final pressure of the gas:

(P1 x V1) / T1 = (P2 x V2) / T2

P2 = (P1 x V1 x T2) / (V2 x T1)

P2 = (1.01 atm x 2.31 L x 308 K) / (1.09 L x 279 K)

P2 = 2.41 atm (rounded to three significant figures)

Therefore, the pressure of the gas when the volume is 1.09 L and the temperature is 308 K is approximately 2.41 atm.

The molality of the solution is 0.0256 m.

The mole fraction of glycerol is  0.00046

The percent by mass concentration of glycerol is 0.23%

The ppm concentration is 2300 ppm

Molality is a measure of the concentration of a solute in a solution. It is defined as the number of moles of solute per kilogram of solvent.

The formula for molality is:

molality = moles of solute / mass of solvent in kilograms

1) Density of water = mass/volume

Mass of water = Density * volume of water

Mass =[tex]0.9982 g/mL * 998.9 mL[/tex]

Mass =0.997 Kg of water

Number of moles of the glycerol =  [tex]2.550* 10^-2 M * 1 L[/tex]

= [tex]2.550*10^-2[/tex] moles

Molality of the solution = [tex]2.550*10^-2[/tex]  moles/0.997 Kg

= 0.0256 m

Number of moles of water = 998.9/18 g/mol

= 55.5 mole

Mole fraction of glycerol = [tex]2.550*10^-2[/tex] /[tex]2.550*10^-2[/tex]  + 55.5

= 0.00046

By percent by mass;

2.3/1001.2 * 100/1

= 0.23%

Mass of glycerol = 2.3 g

Volume of solution = 1 L

Thus we have concentration in ppm as;

[tex]2.3 * 10^3[/tex] mg/ 1 L =2300 ppm

Learn more about molality:https://brainly.com/question/26921570

#SPJ1

Answer:

Cvapor = 2.03 J/(g·°C)heu

b. To determine the number of joules of energy for the slice of cake, we need to convert the calories to joules using the conversion factor 1 calorie = 4.184 joules:

Number of joules = 560 calories * 4.184 joules/calorie = 2343.04 joules

Therefore, the slice of cake contains 2343.04 joules of energy.

c. To determine the number of kilojoules of energy for the slice of cake, we can divide the number of joules by 1000:

Number of kilojoules = 2343.04 joules / 1000 = 2.34304 kilojoules

Therefore, the slice of cake contains 2.34304 kilojoules of energy.

To determine the number of calories in 1.5 kilojoules of energy, we need to convert kilojoules to calories using the conversion factor 1 kilojoule = 1000 calories:

Number of calories = 1.5 kilojoules * 1000 calories/kilojoule = 1500 calories

Therefore, 1.5 kilojoules of energy contains 1500 calories.

Explanation:

Answer:

2. a. 560 Calories, b. 2343.04 J, c. 2.34304 kJ

3. 358.508604 Cal

Explanation:

2.

a. The number of calories found in the slice of chocolate cake is 56012.

b. To determine the number of joules of energy for the slice of cake, we can use the conversion factor that 1 calorie is equal to 4.184 joules3. Therefore, the number of joules in the slice of cake is:

560 Cal ⋅ 4.184 J/ 1 Cal = 2343.04J

c. To determine the number of kilojoules of energy for the slice of cake, we can use the conversion factor that 1 kilojoule is equal to 1000 joules4. Therefore, the number of kilojoules in the slice of cake is:

2343.04 J ⋅ 1 kJ/1000 J = 2.34304 kJ

3. To determine the number of calories in 1.5 kilojoules of energy, we can use the conversion factor that 1 kilojoule is equal to 239.005736 calories1. Therefore, the number of calories in 1.5 kilojoules of energy is:

1.5 kJ ⋅ 239.005736 Cal / 1 kJ = 358.508604 Cal

The amount of heat required to vaporize 181.20 g of ethanol would be 170.1 kJ.

Using the formula:

Q = n ∆Hvap

where:

Moles of 181.20 g of ethanol = 181.20 g / 46.07 g/mol = 3.933 mol

Substituting the values:

Q = 3.933 mol x 43.3 kJ/mol = 170.1 kJ

In other words, the amount of heat required to vaporize 181.20 g of ethanol is 170.1 kJ.

More on heat of vaporization can be found here: https://brainly.com/question/30603212

#SPJ1

Answer:O has 6, Na has 1, and Sr has 2.

Explanation:

The mass of carbon dioxide formed when 24 kg of carbon is burnt completely in oxygen is 88 kg, and the heat released is 811.2 MJ.

What is Molar Mass?

Molar mass is the mass of one mole of a substance and is expressed in grams per mole (g/mol). It is calculated by adding up the atomic masses of all the atoms in a molecule or formula unit of a compound. The molar mass is used in stoichiometry calculations to convert between mass and moles of a substance.

The balanced equation for the combustion of carbon is:

C + O₂ → CO₂

From the equation, we can see that one mole of carbon reacts with one mole of oxygen to produce one mole of carbon dioxide. The molar mass of carbon dioxide is 12 + (2 × 16) = 44 g/mol.

First, let's find the number of moles of carbon in 24 kg:

n(C) = m/M = 24000 g / 12 g/mol = 2000 mol

Therefore, 2000 mol of CO₂ will be produced.

The mass of CO₂ produced can be calculated as:

m(CO₂) = n(CO₂) × M(CO₂) = 2000 mol × 44 g/mol = 88,000 g = 88 kg

Now, let's calculate the heat released during combustion:

Heat released = 33.8 MJ/kg × 24 kg = 811.2 MJ

Learn more about Molar Mass from the given link

https://brainly.com/question/837939

#SPJ9

The final temperature of the copper and water after they come to thermal equilibrium is 109.8°C.

Temperature is a measure of the amount of thermal energy present in a substance or object. It is measured in degrees on a scale such as Fahrenheit, Celsius, or Kelvin. Temperature is important in determining the physical and chemical properties of a substance, such as its melting point, boiling point, and specific gravity. Temperature also affects the rate of a chemical reaction and the speed of diffusion.

The change in temperature of the copper can be calculated using the equation
ΔT = (Q/mc), where Q is the heat transferred, m is the mass of the copper, and c is the specific heat of copper.
Q = mcΔT = (192 g)(0.385 J/g °C)(100°C) = 74080 J
The heat transferred from the copper must equal the heat transferred to the water. Therefore,
(74080 J) = (0.85 L)(4.184 J/g°C)(ΔT)
ΔT = (74080 J)/[(0.85 L)(4.184 J/g°C)] = 109.8°C
The final temperature of the copper and water after they come to thermal equilibrium is 109.8°C.

To learn more about temperature
https://brainly.com/question/4735135
#SPJ1

1. To find the volume and units of a solution that contains 0.50 moles of NaOH dissolved in enough distilled water to make 3.0 M NaOH solution:

We first need to use the formula:

moles = concentration (in moles/L) x volume (in L)

Rearranging the formula to solve for volume, we get:

volume = moles / concentration

Substituting the given values, we get:

volume = 0.50 moles / 3.0 M = 0.17 L

Since the volume is given in liters, the units of the solution are L. Therefore, the solution contains 0.50 moles of NaOH dissolved in 0.17 L of distilled water, which makes a 3.0 M NaOH solution.

2. To find the molarity of a solution that contains 60.0 g of Ca(OH)2 dissolved in 150 mL of solution:

We first need to convert the mass of Ca(OH)2 to moles using the molar mass:

molar mass of Ca(OH)2 = 40.08 g/mol + 2 x 16.00 g/mol + 2 x 1.01 g/mol = 74.10 g/mol

moles of Ca(OH)2 = 60.0 g / 74.10 g/mol = 0.810 moles

Next, we need to convert the volume of the solution from milliliters to liters:

volume of solution = 150 mL / 1000 mL/L = 0.150 L

Finally, we can use the formula:

molarity = moles / volume

Substituting the given values, we get:

molarity = 0.810 moles / 0.150 L = 5.4 M

Therefore, the molarity of the solution is 5.4 M.

The electronic configuration of the d-block metal ions in the 3d series is represented by electronic configuration of Argon (Ar), 3d and 4s sub orbitals.

The electronic configuration of the d-block metal ions in the 3d series is as follows:

Scandium (Sc): [Ar] 3d¹ 4s²

Titanium (Ti): [Ar] 3d² 4s²

Vanadium (V): [Ar] 3d³ 4s²

Chromium (Cr): [Ar] 3d⁵ 4s¹

Manganese (Mn): [Ar] 3d⁵ 4s²

Iron (Fe): [Ar] 3d⁶ 4s²

Cobalt (Co): [Ar] 3d⁷ 4s²

Nickel (Ni): [Ar] 3d⁸ 4s²

Copper (Cu): [Ar] 3d¹⁰ 4s¹

Zinc (Zn): [Ar] 3d¹⁰ 4s²

Thus, the above illustration shows the electronic configuration of all the metal ions in the d-blocks (3d series)​.

Learn more about electronic configuration here: https://brainly.com/question/26084288

#SPJ1

Answer: 4 moles i think this is right im not sure

The concentration of the solution is  0.000435 mol/dm³.

The concentration of a solution is calculated as follows;

Concentration = (Absorbance) / (Molar absorptivity x path length)

the path length =  3cm

the molar absorptivity (E) = 400 dm/mol/cm.

if the solution transmits 30% of the light, it absorbs 70% of the incident light.

Absorbance = log (1/Transmittance)

Absorbance  = log (1/0.3)

Absorbance  = 0.523

Concentration = (0.523) / (400 dm/mol/cm x 3 cm)

= 0.000435 mol/dm³

Learn more about concentration here: https://brainly.com/question/26255204

#SPJ1

The amount of zinc chloride that would be formed if 77.1 grams of zinc reacts is approximately 160.77 grams

To determine how many grams of zinc chloride ([tex]ZnCl_2[/tex]) would be formed if 77.1 grams of zinc (Zn) reacts, we'll use stoichiometry.

First, we need the molar masses of the substances involved:

Zn: 65.38 g/mol
[tex]ZnCl_2[/tex] : 136.29 g/mol
Now, we'll convert grams of Zn to moles:
77.1 g Zn × (1 mol Zn / 65.38 g Zn) = 1.179 moles Zn
According to the balanced chemical equation, 1 mole of Zn reacts to form 1 mole of [tex]ZnCl_2[/tex]:
1.179 moles Zn × (1 mol ZnCl₂ / 1 mol Zn) = 1.179 moles ZnCl₂

Finally, convert moles of ZnCl₂ to grams:
1.179 moles ZnCl₂ × (136.29 g ZnCl₂ / 1 mol ZnCl₂) ≈ 160.77 g ZnCl₂
So, approximately 160.77 grams of zinc chloride would be formed if 77.1 grams of zinc reacts.

For more question on molar masses

https://brainly.com/question/21334167

#SPJ11

The minimum concentration of fluoride ions needed is 2.726 x 10⁻⁴ M.

To find the minimum concentration of fluoride ions needed to precipitate CaF₂, we'll use the solubility product constant (Ksp) and the calcium ion concentration.

Ksp = [Ca²⁺][F⁻]²

Given: [Ca²⁺] = 5.25 x 10⁻³ M, Ksp = 3.9 x 10⁻¹¹

3.9 x 10⁻¹¹ = (5.25 x 10⁻³)[F⁻]²

Solve for [F⁻]:

[F⁻]² = (3.9 x 10⁻¹¹) / (5.25 x 10⁻³)

[F⁻]² = 7.4286 x 10⁻⁹

[F⁻] = 2.726 x 10⁻⁴ M

The minimum concentration of fluoride ions needed is 2.726 x 10⁻⁴ M.

Read more about concentration here:

https://brainly.com/question/17206790

#SPJ1

The solution has a total volume of 300 mL and is composed of 100 mL of ethanol (the solute) and 200 mL of water (the solvent).

Less than 100 ml will result from mixing 50 ml each of ethanol and water in an equal ratio. This happens because ethanol molecules, which are smaller than those of water, may fit inside big water molecules. As a result, the alcohol content in a 250 mL mix of water and alcohol is 60%.

The combined volumes of the ethanol and water make up the total volume of the solution, which is:

Total volume = 100 mL + 200 mL = 300 mL

Therefore, the solution is made up of 100 mL of ethanol (the solute) and 200 mL of water (the solvent), with a total volume of 300 mL.

To know more about solution visit:-

https://brainly.com/question/30665317

#SPJ1

Answer:

as the frequency goes down, the speed goes down by the same factor, and so the wavelength doesn't change.

Explanation:

Answer: as the frequency goes down, the speed goes down by the same factor, and so the wavelength doesn't change.

Explanation: