Answer: one of the things that determinates something is a planet and not a star is that planets are constanlty moving around the sun while stars are "still"
Explanation:
Answer:
1. It must orbit a star (in our cosmic neighborhood, the Sun).
2. It must be big enough that its gravity cleared away any other objects of a similar size near its orbit around the Sun.
Explanation:
I hope this helps!
DNA ___ occurs during the s phase of Interphase.
A. division
B. modification
C. replication
D. multiplication
Answer:
c
Explanation:
Answer:
c
Explanation:
the DNA replication happens in the s phase of interphase
10) Challenge: A student is pushing a 50 kg cart, with a force of 600 N. Another student measures the speed
of the cart, and finds that the cart is only accelerating at 3 m/s2. How lar is the force pushing back on the car?
Hint: Draw a diagram showing the cart, and the two forces acting on it.
The explanation is shown in the picture. Hope it helps!
Edit: where I wrote "m/s" , I should have wrote m/s^2
state the Newton's law of cooling
Explanation:
Newton's law of cooling (or heating) states that the temperature of a body changes at a rate proportional to the difference in temperature between the body and its surroundings. It is a reasonably accurate approximation in some circumstances. dTdt=−k(T−T0), where k is a positive constant.
Answer:
Q=h.A.(T(t)-Tenu)
Explanation:
The Earth orbits the Sun because of the competing forces of _________________ and _______________________.
A certain fm radio wave has a frequency of 1.31*10^8 he given that radio waves travel at 2.99*10^8 m/s what is the wavelength of this fm radio wave
Answer:
The answer is "[tex]3.92 \times 10^{16} \ m[/tex]"
Explanation:
Given:
[tex]\to v= 1.31 \times 10^8 \\\\\\to f=2.99\times 10^8 \ \frac{m}{s}\\\\[/tex]
Using formula:
[tex]\lambda=vf\\\\[/tex]
[tex]=2.99\times 10^8 \times 1.31\times 10^8\\\\=2.99\times 1.31\times 10^{16}\\\\=3.9169 \times 10^{16} \ m[/tex]
[tex]=3.92 \times 10^{16} \ m[/tex]
According to the graph, how much Potassium bromide can be dissolved in 100 g of warer at 40C?
Answer:
77.8 g potassium bromide can be dissolved in 100 grams of water at 40°C.
Explanation:
In a given a line of KBr is straight.
A 97.3 kg horizontal circular platform rotates freely with no friction about its center at an initial angular velocity of 1.67 rad/s . A monkey drops a 9.67 kg bunch of bananas vertically onto the platform. They hit the platform at 45 of its radius from the center, adhere to it there, and continue to rotate with it. Then the monkey, with a mass of 21.9 kg , drops vertically to the edge of the platform, grasps it, and continues to rotate with the platform. Find the angular velocity of the platform with its load. Model the platform as a disk of radius 1.73 m
Answer:
w = 1.14 rad / s
Explanation:
This is an angular momentum exercise. Let's define a system formed by the three bodies, the platform, the bananas and the monkey, in such a way that the torques during the collision have been internal and the angular momentum is preserved.
Initial instant. The platform alone
L₀ = I w₀
Final moment. When the bananas are on the shelf
we approximate the bananas as a point load and the distance is indicated
x = 0.45m
L_f = (m x² + I ) w₁
angular momentum is conserved
L₀ = L_f
I w₀ = (m x² + I) w₁
w₁ = [tex]\frac{I}{m x^2 + I} \ w_o[/tex]
Let's repeat for the platform with the bananas and the monkey is the one that falls for x₂ = 1.73 m
initial instant. The platform and bananas alone
L₀ = I₁ w₁
I₁ = (m x² + I)
final instant. After the crash
L_f = I w
L_f = (I₁ + M x₂²) w
the moment is preserved
L₀ = L_f
(m x² + I) w₁ = ((m x² + I) + M x₂²) w
(m x² + I) w₁ = (I + m x² + M x₂²) w
we substitute
w = [tex]\frac{m x^2 +I}{I + m x^2 + M x_2^2} \ \frac{I}{m x^2 + I} \ w_o[/tex]
w = [tex]\frac{I}{I + m x^2 + M x_2^2} \ w_o[/tex]
the moment of inertia of a circular disk is
I = ½ m_p x₂²
we substitute
w = [tex]\frac{ \frac{1}{2} m_p x_2^2 }{ \frac{1}{2} m_p x_2^2 + M x_2^2 + m x^2} \ \ w_o[/tex]
let's calculate
w =[tex]\frac{ \frac{1}{2} \ 97.3 \ 1.73^2 }{ \frac{1}{2} \ 97.3 \ 1.73^2 + 21.9 \ 1.73^2 + 9.67 \ 0.45^2 } \ \ 1.67[/tex]
w = [tex]\frac{145.60 }{145.60 \ + 65.54 \ + 1.958} \ \ 1.67[/tex]
w = 1.14 rad / s
Which of the following statements correctly describes sound waves? Select all that apply.
a) Sound waves travel as transverse waves.
b)Sound waves travel as longitudinal waves.
c)Sound waves travel at a speed of 3×108 m/s.
d)Sound waves can travel through the vacuum of space.
e)Sound waves typically move faster through solids than gases.
Answer:
a
Explanation:
transverse waves travel at a right angle to the direction of the wave motion and the examples of transverse waves are water waves and radio waves of which radio produces sound.
Answer:
The correct option is A.
Sound waves travel as transverse waves.
Explanation:
Sound waves is a type of compression or mechanical vibrations that travel through a medium such as water, air and the energy of the medium through which it's travel cause the vibrations.
Sound travel as transverse waves because it move through a right angle direction of the wave movement and it travel through a medium such as air.
Example include Radio waves and water waves.
Therefore, Sound waves travel as transverse waves.
For further details, check https://brainly.in/question/2933603
five properties of light
Answer:
Light is electromagnetic radiation that has properties of waves. The electromagnetic spectrum can be divided into several bands based on the wavelength. As we have discussed before, visible light represents a narrow group of wavelengths between about 380 nm and 730 nm.
OR
The primary properties of visible light are intensity, propagation-direction, frequency or wavelength spectrum and polarization, while its speed in a vacuum, 299 792 458 m/s, is one of the fundamental constants of nature.
please see the picture
Answer:
t.f. are you sure that's english? it looks like not a real thing
Explanation:
The expansion of a liquid is _____ than a solid
A. less
B. greater
Answer:
B.Greater
Explanation:
Smack that thanks button pleasee.
Give a common example of Newton's first law of motion and why (include inertia in your answer)
30 pts
Plz help me ✌
7. Explain what happens to the volume of a sphere when the radius is tripled?
ANYONE PLS ASAPPPPPPP
[tex]\mathfrak{\huge{\orange{\underline{\underline{AnSwEr:-}}}}}[/tex]
Actually Welcome to the concept of surface areas and Volumes.
When the radius is 'r', we get as,
V = 4/3*(π)(r^3)
when the radius is tripled that is '3r' , we get as,
V' = 4/3 (π)(3r)^3
V' = 27*(4/3(π)(r^3))
V' = 27 V
hence the new volume, when radius is tripled, is 27 times greater than the old sphere.
Which would take more force to stop in 10 seconds: an 8.0-kilogram ball rolling in a straight line at a speed of 0.2 m/sec or a 5.0-kilogram ball rolling along the same path at a speed of 1.0 m/sec?
Answer:
Higher force would be required to stop 5 kg of ball
Explanation:
The force required to stop a moving object depends on its momentum.
The momentum for 8 kg of rolling ball is = 8 kg * 0.2 m/s = 1.6 kgm/s
The momentum for 5 kg of rolling ball is = 8 kg * 1.0 m/s = 5 kgm/s
Hence, momentum of 5 Kg ball is higher than the momentum of 8 Kg of ball
Hence, higher force would be required to stop 5 kg of ball
A stone is thrown horizontally from a 50m high cliff with an initial speed of 15 meters per second. How far will the stone have travelled from the cliff when it strikes the ground?
a. 45.92m/s
b. 47.85 m
c. 58.2 seconds
d. 35.85 m/s/s
This is a classic case of 'velocity components.'
Imagine a vector for velocity. Now, consider that this vector could be the hypotenuse of a right triangle, with two other sides going along the x and y-axis. These sides of the triangle will have values, and adding them up using the pythagorean theorem will prove that the sum of their squares equals the square of the original vector.
Well, okay, that's nice and all, you may be saying - but how do we solve the actual question?
Let's apply this thought to the question. This vector can have both an x component and y component (essentially, parts of the vector that travel along the x and y-axis).
Now, what could these components be? We know that the stone is thrown perfectly horizontally, meaning that the x-component is quite literally the velocity.
How about the y-component? Since it's thrown at a perfect horizontal, there isn't really any vertical velocity whatsoever. There's only horizontal velocity.
"Great, fantastic! So, what's the importance of figuring out the horizontal and vertical velocities?"
When a stone is in free fall, it experiences a gravitational acceleration. This acceleration from gravity, though, only affects the vertical velocity. Since gravity is vertical as well, it's essentially impossible for the horizontal velocity to be changed at all.
This means that to solve the horizontal distance, we simply need to find the time it takes for the rock to hit the ground and multiply said time by the horizontal velocity.
Since the vertical velocity is the only thing changed by gravity, we can write out an equation that can solve for the time:
∆Y = [tex]v_{i}[/tex]t + [tex]\frac{1}{2}[/tex]g[tex]t^{2}[/tex]
We know that initial vertical velocity is zero, so:
∆Y = [tex]v_{i}[/tex]t + [tex]\frac{1}{2}[/tex]g[tex]t^{2}[/tex]
∆Y = 0t + [tex]\frac{1}{2}[/tex]g[tex]t^{2}[/tex]
∆Y = [tex]\frac{1}{2}[/tex]g[tex]t^{2}[/tex]
We need to solve for t, so let's isolate the variable. Multiply both sides by 2 to get rid of the fraction:
∆Y * 2 = [tex]\frac{1}{2}[/tex]g[tex]t^{2}[/tex] * 2
2∆Y = g[tex]t^{2}[/tex]
Divide both sides by g:
(2∆Y)/g = [tex]\frac{gt^{2} }{g}[/tex]
Square root both sides:
[tex]\sqrt{(2Y)/g}[/tex] = [tex]\sqrt{t^{2} }[/tex]
t = [tex]\sqrt{(2Y)/g}[/tex]
Input our values for Y and g (Y is the height of the cliff, and g is gravitational acceleration):
t = [tex]\sqrt{(2*50)/9.80}[/tex]
Solve:
t = [tex]\sqrt{(2*50)/9.80}[/tex]
t = 3.194 (s)
Whew! That was a lot of steps to find the time! Now that we have the time, we can find the horizontal distance the rock travels:
∆x = [tex]v_{i}[/tex]t + [tex]\frac{1}{2}[/tex]a[tex]t^{2}[/tex]
The horizontal velocity has no acceleration (gravity is vertical!), so:
∆x = [tex]v_{i}[/tex]t + [tex]\frac{1}{2}[/tex]*0*[tex]t^{2}[/tex]
∆x = [tex]v_{i}[/tex]t
The horizontal velocity is 15 m/s, and the time is 3.194:
∆x = [tex]v_{i}[/tex]t
∆x = 15 * 3.194
∆x = 47.91 (m)
Since we rounded the time, it makes sense that our final answer's a little bit off to the options. The closest one is option B, which is only 0.6m off, a tiny difference that may have come from the test maker's use of '10 m/[tex]s^{2}[/tex]' as the gravitational acceleration (while we stayed as accurate as possible with 9.80) as well as our rounding of the final time.
Option B, the stone will have travelled 47.85 meters.
If you have any questions on how I got to the answer or if you're still confused on any topic I attempted to explain, just ask in the comments and I'll try to answer it to the best of my ability! Good luck!
- breezyツ
A 1.2 kg block is held at rest against the spring with a force constant k= 730 N/m. Initially, the spring is compressed a distance d. When the block is released, it slides across a surface that is frictionless except for a rough patch of width 5.0 cm that has a coefficient of kinetic friction = 0.44. Find d, such that the block's speed after crossing the rough patch is 2.3 m/s.
Answer:
Compression distance: [tex]d \approx 0.102\,m[/tex]
Explanation:
According to this statement, we know that system is non-conservative due to the rough patch. By Principle of Energy Conservation and Work-Energy Theorem, we have the following expression that represents the system having a translational kinetic energy ([tex]K[/tex]), in joules, at the expense of elastic potential energy ([tex]U[/tex]), in joules, and overcoming work losses due to friction ([tex]W_{l}[/tex]), in joules:
[tex]K + W_{l} = U[/tex] (1)
By definitions of translational kinetic and elastic potential energies and work losses due to friction, we expand the equation described above:
[tex]\frac{1}{2}\cdot m \cdot v^{2} +\mu\cdot m\cdot g \cdot s = \frac{1}{2} \cdot k \cdot d^{2}[/tex] (2)
Where:
[tex]m[/tex] - Mass of the block, in kilograms.
[tex]v[/tex] - Final velocity of the block, in meters per second.
[tex]\mu[/tex] - KInetic coefficient of friction, no unit.
[tex]g[/tex] - Gravitational acceleration, in meters per square second.
[tex]s[/tex] - Width of the rough patch, in meters.
[tex]k[/tex] - Spring constant, in newtons per meter.
[tex]d[/tex] - Compression distance, in meters.
If we know that [tex]m = 1.2\,kg[/tex], [tex]v = 2.3\,\frac{m}{s}[/tex], [tex]\mu = 0.44[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]s = 0.05\,m[/tex] and [tex]k = 730\,\frac{N}{m}[/tex], then the compression distance of the spring is:
[tex]\frac{1}{2}\cdot m \cdot v^{2} +\mu\cdot m\cdot g \cdot s = \frac{1}{2} \cdot k \cdot d^{2}[/tex]
[tex]m\cdot v^{2} + 2\cdot m\cdot g \cdot s = k\cdot d^{2}[/tex]
[tex]d = \sqrt{\frac{m\cdot (v^{2}+2\cdot g\cdot s)}{k} }[/tex]
[tex]d \approx 0.102\,m[/tex]
Explain why gases are more compressible than solid
Answer:
If we put pressure on a solid or a liquid, there is essentially no change in volume. ... The kinetic-molecular theory explains why gases are more compressible than either liquids or solids. Gases are compressible because most of the volume of a gas is composed of the large amounts of empty space between the gas particles.
Explanation:
Which BEST explains why rainbows only appear when there is rain and sun? a)The rain needs to dim the light for them to appear. b)The combination of light and water creates a prismatic effect. c)The sun restricts the light rays that impact with the water. d) Heavy rain and little sun produce the strongest rainbows.
Answer:
C
Explanation:
Answer:
You're answer would be B.
Explanation:
Fact: A water droplet refracts and disperses the incident sunlight, then reflect it internally and finally refract it again, when it emerges out of water droplet thus acting like a prism.
In Option B, It states: The combination of light and water creates a prismatic
Therefore, This option is true! However, I would say the combination of light and water make more of a chroma effect to water (my opinion)!
-♥ Have a nice day ♥-
which are the upthrust forces?
Explanation:
An object that is partly or completely submerged experiences a greater pressure on its bottom surface than on its top.
Answer:
upthrust force is an upward force exerted by a fluid that opposes the weight of a partially or fully immersed object
What do you call the material or "stuff" that a wave travels through
A medium
B wave
C decibel
D doppler
PLEASE HELP ASAP
Dry ice changes state directly from a solid to a gas at room temperature, in a process called sublimation. What does sublimation demonstrate?
Answer:
changing from a solid to a gas without changing into a liquid. :)
What variables must be known to determine the observed frequency of a wave?
Answer:
The frequency, 'f', of a wave is given by the speed, 'v' of the wave and the wavelength, λ, of the wave
f = v/λ
The frequency, 'f', of a wave is also given by the inverse of the period, 'T', of the wave which is the time it takes the wave to complete an oscillation or a cycle
f 1/T
Therefore, the variables to be known to determine the frequency of a wave includes either, the velocity and the wavelength of the wave or the period of oscillation (the wave cycle) of the wave
Explanation:
“Do you think that the role of culture, gender,
and/or race has changed in sclence between the times we are learning
about and today's times? If so, how? If not, explain your thoughts?"
Answer:
this is based on your opinion but mine is...
Explanation:
Do you think that the role of culture, gender, and/or race has changed in sclence between the times we are learning about and today's times? If so, how? If not, explain your thoughts?
Yes by how because Race’ cannot be biologically defined due to genetic variation among human individuals and populations. (A) The old concept of the “five races:” African, Asian, European, Native American, and Oceanian. According to this view, variation between the races is large, and thus, the each race is a separate category. Additionally, individual races are thought to have a relatively uniform genetic identity. (B) Actual genetic variation in humans. Human populations do roughly cluster into geographical regions. However, variation between different regions is small, thus blurring the lines between populations. Furthermore, variation within a single region is large, and there is no uniform identity.
Please help....
Genetics Practice Problems
1. AA = HoD Ee = He Ii = He Mm = He
Bb = He ff = HoR Jj = He nn = HoR Cc = He
GG = HoD kk = HoR OO = HoD Dd = He
HH = HoD Ll = He Pp = He
Technician A says that daytime running lights (DRLs) light the headlights, usually at reduced intensity, whenever the engine is running. Technician B says high-intensity discharge (HID) headlights are brighter and have a yellow tint. Who is right?
Answer:
technician A is right
Explanation:
Daytime running lights are auxiliary lights that allow other cars to see us better. They are not intended to illuminate the road, so their intensity is low.
Consequently technician A is right
HID lights are high intensity lights, generally bluish-white in color, yellow lights are halogen lights with lower intensity than HID lights.
Consequently, technician B is wrong
A 5 kg object experiences a horizontal force, which
causes it to accelerate at 2 m/s2, moving it a distance of
10 m horizontally. How much work is done by the force
on the object?
Answer:
The work is done by the force 100 NM.
Explanation:
=5kg * 2 m/s^2
=5* 2 N (kg*m/s^2=N)
=10N
Work done = force* distance
=10N* 10
= 100 NM
For an object of mass 5 kg accelerating at the rate of 2 m/s², then the work done by the force on the object will be 100 Nm.
What is Work?In physics, the word "work" involves the measurement of energy transfer that takes place when an item is moved over a range by an externally applied, at least a portion of which is applied within the direction of the displacement.
The length of the path is multiplied by the element of a force acting all along the path to calculate work if the force is constant. The work W is theoretically equivalent towards the force f times the length d, or W = fd, to portray this concept.
As per the given information in the question,
Mass of the object, m = 5 kg
Acceleration, a = 2 m/s²
Distance, d = 10 m
W = f × d
W = m × a × d
W = 5 × 2 × 10
W = 100 Nm
To know more about Work:
https://brainly.com/question/13662169
#SPJ2
The magnetic field at point P due to a 2.0-A current flowing in a long, straight, thin wire is 8.0 μT. How far is point P from the wire?
Answer:
r = 0.05 m = 5 cm
Explanation:
Applying ampere's law to the wire, we get:
[tex]B = \frac{\mu_oI}{2\pi r}\\\\r = \frac{\mu_oI}{2\pi B}[/tex]
where,
r = distance of point P from wire = ?
μ₀ = permeability of free space = 4π x 10⁻⁷ N/A²
I = current = 2 A
B = Magnetic Field = 8 μT = 8 x 10⁻⁶ T
Therefore,
[tex]r = \frac{(4\pi\ x\ 10^{-7}\ N/A^2)(2\ A)}{2\pi(8\ x\ 10^{-6}\ T)}\\\\[/tex]
r = 0.05 m = 5 cm
A runner slows down after completing works her deceleration is 0.25m/s after 5 sec she is traveling at 4m/s determine her initial velocity
Answer:
vi = 5.25 m/s
Explanation:
We can determine the initial velocity of the runner by using the first equation of motion, as follows:
[tex]v_f = v_i + at\\[/tex]
where,
vf = final speed of the runner = 4 m/s
vi = initial speed of the runner = ?
a = deceleration of the runner = - 0.25 m/s²
t = time taken = 5 s
Therefore,
[tex]4\ m/s = v_i + (-0.25\ m/s^2)(5\ s)\\v_i = 4\ m/s + 1.25\ m/s\\[/tex]
vi = 5.25 m/s
In which direction is the magnetic field in the center of the solenoid?
Answer:direction A
Explanation:
Took test
The direction is the magnetic field in the center of the solenoid will be towards A. The direction of the magnetic field is toward the A.
What is a solenoid?A coil of wire that carries an electric current is a solenoid. A solenoid is an electromagnet formed by a helical coil of wire. Which generates a magnetic field when an electric current is passed through the coil .
A solenoid is a form of coil that produces a magnetic field when the electric current is passed through it. A solenoid is created when a conductive wire is used to make a loop.
Use your understanding of the magnetic field's form to determine the direction of the magnetic field along the middle of the solenoid.
Because the current wraps around the core of the solenoid in this scenario, it may be controlled with your fingertips. It goes with your thumb since the magnetic field is straight down the inside.
To learn more about the solenoid, refer to the link ;
brainly.com/question/16015159
#SPJ2
The diagram shows how Earth is tilted on its axis as it revolves around the Sun. What is the season in the United States when Earth is in position C
Winter
It is winter because the Northern Hemisphere is not facing the sun.
