Under what circumstances will the distance traveled by an object be the same as the magnitude of the displacement of an object?​

Answer:

22.2 seconds

Explanation:

recall that for a regular wave

v = fλ

where v = wave velocity (we need to find this to solve the next part)

f = frequency = 4.5 Hz

λ = wavelength = 2.0m

Substituting these into the equation above,

v = fλ

v = (4.5)(2)

v = 9.0m/s

Also recall that Distance travelled = velocity x time

in our case, we found velocity above (= 9.0 m/s) and the distance across the harbor is given as 200m, hence

Distance travelled = velocity x time

200 = 9.0 x time

time = 200/9.0

time = 22.2 seconds

Answer:

C.) the mass of mars is less than the mass of earth.

Explanation:

The more mass of the planet, the stronger the gravitational pull is. The rover will seem lighter on mars because there is less gravity pulling it onto the planet.

The mass of mars is less than the mass of earth.

The more mass of the planet, the stronger the gravitational pull is. The rover will seem lighter on mars because there is less gravity pulling it onto the planet.

Earth, the third planet from the Sun, is the planet where all known life is found. Although the Solar System contains enormous amounts of water, only Earth is home to liquid surface water.

The ocean covers roughly 70.8% of Earth's surface, dwarfing the polar ice, lakes, and rivers. Earth's surface is made up of continents and islands for the remaining 29.2% of its total area.

Therefore, The mass of mars is less than the mass of earth.

To learn more about Earth, refer to the link:

https://brainly.com/question/12041467

#SPJ2

Answer:

Explanation:

Different Parts of an Electric Motor and Their Function

A simple motor has the following parts:

A power supply – mostly DC for a simple motor

Field Magnet – could be a permanent magnet or an electromagnet

An Armature or rotor

Commutator

Brushes

Axle

Power Source: A simple motor usually has a DC power source.  It supplies power to the motor armature or field coils.

Commutator: It is the rotating interface of the armature coil with a stationary circuit.

Field Magnet: The magnetic field helps to produce a torque on the rotating armature coil by virtue of Fleming’s left-hand rule.

Armature Core: Holds the armature coil in place and provides mechanical support.

Armature Coil: It helps the motor to run.

Brushes: It is a device that conducts current between stationary wires and moving parts, most commonly the rotating shaft.

What Is The Working Principle of An Electric Motor?

The working of an electric motor is based on the fact that a current carrying conductor produces a magnetic field around it. To better understand, imagine the following situation.

Take two bar magnets and keep the poles facing each other with a small space in between. Now, take a small length of a conducting wire and make a loop. Keep this loop in between the space between the magnets such that it is still within the sphere of influence of the magnets. Now for the last bit. Connect the ends of the loop to battery terminals.

Once electricity flows through your simple circuit, you will notice that your loop “moves”. So why does this happen? The magnetic field of the magnets interferes with that produced due to electric current flowing in the conductor. Since the loop has become a magnet, one side of it will be attracted to the north pole of the magnet and the other to the south pole. This causes the loop to continuously rotate. This is the principle of working of electric motor.

Throughout your life, your skin will change constantly, for better or worse. In fact, your skin will regenerate itself approximately every 27 days. Proper skin care is essential to maintaining the health and vitality of this protective organ.

Answer:

-10N to the left.

Explanation:

   The net force on a body is the single force that represent all the forces acting on a body.

 Let the right direction be positive

  Let the left direction be negative

Force acting to the right  = 5N

Force acting to the left  = -15N

Net force  = 5N + (-15N) = -10N

The net force will be directed -10N to the left.

Answer:

(1) body composition, (2) flexibility, (3) muscular strength, (4) muscular endurance, and (5) cardiorespiratory endurance. 

Answer:

280 N

Explanation:

acceleration = v2-v1 / time taken = (2-4 )/ 0.05 = -40 m/s^2  ( neg sign indicates slowing down )

force exerted = ma = 7 kg x -40 m/s^2 = - 280 N ( neg sign means opposite direction of initial velocity )

since the 7 kg ball is slowing down, the  direction of force will be opposite of the initial velocity , and it will be 280 N

Answer:

this was 2 weeks ago, but im pretty sure the correct answers are:

B=c

C=d

D=b

hope this helps and is correct :)

Answer:

We have to think safe when performing ballroom dances or any other form of dance due to dance moves being a physical activity which is usually prone to some form of accidents.

This is because it involves the movement of various parts of the body which has joints and such joints could easily be sprained when the wrong steps are taken which is usually why caution should be taken.

Owing the swift movements involved in a ballroom dance, we must think safe when performing a ballroom dance.

Dance involves the movement of parts of the body. Usually, these body movements are swift and vigorous. As a result of the vigor involved in moving the body during a dance, it is necessary to exercise caution.

Therefore, it is important to think safe during a ballroom dance to avoid a sprain or fracture or any other kind of injury.

Learn more: https://brainly.com/question/20906233

Answer:

why did the parents let go of their child-

Explanation:

A 5 kg, because 90 / 18 is 5

The mass of the carriage is 10 kg

The formular for kinetic energy

K.E= 1/2mv²

Kinetic energy= 90 joules

velocity= 18 m/s

mass= ?

90= 1/2 × mass × 18

90= 0.5 × 18 × mass

90= 9 × mass

mass= 90/9

= 10 kg

Hence the mass of the carriage is 10 kg

For more information, please see the link below

https://brainly.com/question/13882667?referrer=searchResults

Answer:

It doesn't change. It stays the same.

I hopes this helped you and if it did I'm glad I helped someone!!!

Explanation:

Answer:

1.2 W

Explanation:

Let the value of resistance be R , emf of battery be E

current i = E / R

power = i² R

= E² x R / R²

= E² / R

Given

E² / R = .30

when two batteries are connected

Total emf = 2E

current = 2E / R

Power = ( 2E / R )² x R

= 4 E² / R

= 4 x .30

= 1.2 W .

Explanation:

Average velocity indicates direction and can be represented as a negative number when the displacement is in the negative direction. Average speed does not indicate direction and can only be positive or zero.

Answer: Light energy

Explanation: Light energy is a form of radiant energy that is visible to the human eye.

Answer:

Explanation:

The momentum of an object can be found by using the formula

momentum = mass × velocity

From the question we have

momentum = 730 × 20

We have the final answer as

Hope this helps you

Answer:

A) v₁ = 5.66 [m/s]

Explanation:

To solve this problem we must use the definition of linear momentum conservation, which tells us that momentum is conservation before and after a collision.

The linear momentum is equal to the mass by the product of the Velocity.

P = m*v

where:

P = lineal momentum [kg*m/s]

m = mass [kg]

v = velocity [m/s]

Now, to the right side of the equal sign will take the linear momentum before the collision and to the left side of the equal sign as after the collision.

Pbefore = Pafter

(m₁*v₁) - (m₂*v₂) = (m₁*v₃) + (m₂*v₄)

where:

m₁ = mass of the car = 1450 [kg]

v₁ = velocity of the car before the collision [m/s]

m₂ = mass of the shopping cart = 60 [kg]

v₂ = velocity of the shopping cart before the collision = -1.2 [m/s]

v₃ = velocity of the car after the collision = 5.13 [m/s]

v₄ = velocity of the shopping cart after the collision = 11.75 [m/s]

Now replacing:

(1450*v₁) - (60*1.2) = (1450*5.13) + (60*11.75)

1450*v₁ - 72 = 7438.5 + 705

1450*v₁  = 7438.5 + 705 + 72

1450*v₁ = 8215.5

v₁ = 5.66 [m/s]

Answer:

5.67 m/s

Just did it.

Answer:

Force of kinetic friction, Fk = 6N

Explanation:

Given the following data;

Coefficient of kinetic friction, μ = 0.2

Normal force, Fn=30N

To find the Force of kinetic friction;

Mathematically, the force of kinetic friction is given by the formula;

Fk = μFn

Where;

Substituting into the equation, we have;

Fk = 0.2*30

Fk = 6N

Therefore, the force of kinetic friction is 6N.

A force that is present between two moving objects or surfaces is called kinetic friction. It is estimated in newtons (N) and is calculated by:

[tex]\rm F_{k} =\rm \mu _{\rm k} F_{n}[/tex]

Where, [tex]\rm F_{k}[/tex] = frictional force,  [tex]\mu _{\rm k}[/tex]  = coefficient, [tex]\rm F_{n}[/tex] = normal force.

The kinetic friction of the object is 6N.

The kinetic friction can be estimated as:

Given,

Substituting values in the formula:

[tex]\rm F_{k} =\rm \mu _{\rm k} F_{n}[/tex]

[tex]\begin{aligned}\rm F_{k} &= 0.2 \times 30\\\\\rm F_{k} &= 6 \rm N\end{aligned}[/tex]

Therefore, 6N is the frictional force.

To learn more about frictional force follow the link:

https://brainly.com/question/1714663

Answer:

15N

Explanation:

Answer:

15N

Explanation:

F=(45-30) N=15N

.........

Explanation:

The calcified bones of our skeleton work with circulatory system. Marrow inside our bones helps to produce cell inside blood. Both red blood cell and white blood cell are produced in bones. Circulatory system delivers oxygenated blood into bones.

Answer: 2 m/s is the answer

Explanation:

Answer:

The answer is B

Explanation:

Answer:

Question 5: The outer core has a lower temperature and lower pressure than the inner core

This is because the outer core is not as hot as the inner core. It is also under slightly less pressure. Due to this, the outer core is liquid and less dense than the inner core.

Question 6: I'm not sure what the answer to that is.. but I believe you'll figure it out!

Answer:

The reason why the inner core of planet Earth is a solid while the outer core is a liquid is because: B. The outer core has a lower temperature and lower pressure than the inner core.

Earth refers to one of the planetary bodies that rotates on its axis and revolves around the Sun in slightly elliptical orbits.

Generally, Earth comprises four (4) distinct layers starting at the center and these include;

The inner core.

The outer core.

The mantle.

The crust.

The inner core is the deepest layer of planet Earth and a solid while the outer core is a liquid.

One of the strategies used by scientists to learn about Earth's deepest layers, inner and outer structure is by recreating high-pressure conditions in a laboratory.

According to these experiments conducted by scientists on planet Earth, the pressure in the inner core is immense and over three (3) million times greater than the pressure on Earth’s outer core.

In conclusion, the inner core has a higher temperature and higher pressure than the outer core of planet Earth, thereby, making the inner core of planet Earth is a solid while the outer core is a liquid.

Explanation:

Answer:

Is always negative answer for you

Answer:

almost 100% positive its B but dont take me up on it

A.) Steel.

steel travels 5,060 meters per second,

lead travels 1,402 meters per second,

water travels 1,439 meters per second,

and air depends on temperature.

Question is not complete, so i have attached it.

Answer:

A) W = 1.962 N

B) F_f = 0.706 N

C) F_net = 3.294 N

Explanation:

A) The block is 0.2 kg.

Formula for weight is;

W = mg

W = 0.2 × 9.81

W = 1.962 N

B) Magnitude of the force acting on the moving block is given by;

F_f = μmg

Where μ is coefficient of kinetic friction

Coefficient of kinetic friction for copper(mild steel) from online sources is 0.36

Thus;

F_f = 0.36 × 1.962

F_f = 0.706 N

C) Magnitude of net force is;

F_net = F_applied - F_f

F_net = 4 - 0.706

F_net = 3.294 N

1. The weight of the copper block is equal to 1.96 Newton.

2. The magnitude of the force acting on the moving copper block is 0.7056 Newton.

3. The magnitude of the net force acting on the moving copper block is 3.2944 Newton.

Given the following data:

We know that the acceleration due to gravity (g) of an object on planet Earth is equal to 9.8 [tex]m/s^2[/tex].

We know that the coefficient of kinetic friction for copper is equal to 0.36.

1. To determine the weight of the copper block:

[tex]Weight = mg\\\\Weight = 0.200 \times 9.8[/tex]

Weight = 1.96 Newton

2. To determine the magnitude of the force acting on the moving copper block:

Mathematically, the force of kinetic friction is given by the formula;

[tex]F_k = umg[/tex]

Where;

Substituting the parameters into the formula, we have;

[tex]F_k = 0.36 \times 0.200 \times 9.8\\\\F_k = 0.7056 \;Newton[/tex]

3. To determine the magnitude of the net force acting on the moving copper block:

[tex]F_{net} = F - F_k\\\\F_{net} = 4-0.7056\\\\F_{net} = 3.2944\;Newton[/tex]

Read more: https://brainly.com/question/13754413

Answer:

the amount of force that keeps two surfaces touching, but does not let them come apart or press further together

Explanation:

Hope this helps - Good luck ^w

Normal force is the support force exerted upon an object that is in contact with another stable object.

A horizontal line means the object is. not changing its position it is not moving, it is at rest.

Answer:

horizontal lines on any chart is where the y axis values are equal.