The volume of a sample of air in a cylinder with
a movable piston is 2.0 L at a pressure P1 , as
shown in the diagram above. The volume is
increased to 5.0 L as the temperature is held
constant. The pressure of the air in the cylinder is
now P2 . What effect do the volume and pressure
changes have on the average kinetic energy of the
molecules in the sample?
(A) The average kinetic energy increases.
(B) The average kinetic energy decreases.
(C) The average kinetic energy stays the same.
(D) It cannot be determined how the kinetic
energy is affected without knowing P1
and P2 .

Answer:

0.745 moles

Explanation:

We can use the ideal gas law, which relates the pressure (P), volume (V), number of moles (n), and temperature (T) of a gas:

P V = n R T

where R is the gas constant.

We can rearrange this equation to solve for n:

n = (P V) / (R T)

We can look up the value of the gas constant for units of atm L / (mol K). The value is approximately 0.08206 (atm L) / (mol K).

Substituting the given values, we get:

n = (1.71 atm) * (12.85 L) / (0.08206 (atm L) / (mol K) * (68.16 + 273.15) K)

where we have converted the temperature from Celsius to Kelvin by adding 273.15.

Evaluating this expression gives us:

n ≈ 0.745 mol

Therefore, there are approximately 0.745 moles of gas in the sample.

3.09 g is the theoretical mass of AlBr₃(s) produced.

The following dimensional analysis setup could be used to determine the theoretical mass of AlBr₃(s) (molecular mass = 266.69 g/mol) produced based on reacting 84.2 g of a 0.005 mol/L solution of Br₂(l) (density=1019 g/L) with excess Al(s) as described in the following equation:

3Br₂(l) + 2Al(s) → 2AIBr₃(s)

The dimensional analysis setup to calculate the mass of AlBr₃(s) produced is as follows:

84.2 g Br₂ (l) × (1 L solution / 1019 g Br₂(l)) × (0.005 mol Br₂(l) / 1 L solution) × (2 mol AlBr₃(s) / 3 mol Br₂(l)) × (266.60 g AlBr₃(s) / 1 mol AlBr₃(s)) = 3.09 g AlBr₃(s)

Therefore, the theoretical mass of AlBr₃(s) produced is 3.09 g.

Find out more on dimensional analysis here: https://brainly.com/question/24514347

#SPJ1

The number of mole of the gas lost, given that the pressure had dropped to 97.0 atm is 44.5 moles

First, we shall determine the initial mole of the gas. Details below:

P₁V₁ = n₁RT₁

107 × 109 = n₁ × 0.0821 × 298

Divide both sides by (0.0821 × 298)

n₁ = (107 × 109) / (0.0821 × 298)

n₁ = 476.7 mole

Next, w shall determine the final mole of the gas. Details below

P₂V₂ = n₂RT₂

97 × 109 = n₂ × 0.0821 × 298

Divide both sides by (0.0821 × 298)

n₂ = (97 × 109) / (0.0821 × 298)

n₂ = 432.2 mole

Finally, we shall determine the mole of the gas that was lost. Details below:

Mole lost = n₁ - n₂

Mole lost = 476.7 - 432.2

Mole of gas lost = 44.5 moles

Learn more about number of mole:

https://brainly.com/question/29927685

#SPJ1

Fusion and fission are two types of nuclear reactions that involve changes in the atomic nucleus of an atom.

Fusion is the process of combining two light atomic nuclei to form a heavier nucleus. This process releases a large amount of energy in the form of heat and light. Fusion occurs under high temperatures and pressures, similar to those found in the core of a star. A specific example of fusion is the fusion of two hydrogen nuclei to form helium, which is the process that powers the sun. In this reaction, the two hydrogen nuclei (protons) combine to form a helium nucleus, which consists of two protons and two neutrons. This process releases a large amount of energy in the form of gamma rays and other high-energy particles.

Fission, on the other hand, is the process of splitting a heavy atomic nucleus into two or more smaller nuclei. This process also releases a large amount of energy in the form of heat and radiation. Fission is used in nuclear power plants to generate electricity. A specific example of fission is the splitting of a uranium-235 nucleus into two smaller nuclei, such as krypton-92 and barium-141, and several neutrons. This reaction also releases a large amount of energy in the form of gamma rays and other high-energy particles.

In the case of the element Si-32, fusion and fission reactions can occur. For example, Si-32 can undergo fusion with hydrogen to form a heavier element, such as sulfur or argon. On the other hand, Si-32 can also undergo fission, where it can split into smaller nuclei, such as magnesium and calcium. The specific details of these reactions, including the amount of energy released and the products formed, depend on the specific conditions and the reactants involved.

1. The long-haired cat in the P generation is a purebred. This is because it has two copies of the recessive allele (hh) responsible for long hair.

2. The short-haired cat in the P generation is a hybrid. We know this because the offspring include both short-haired (Hh) and long-haired (hh) cats, indicating that the short-haired parent must have one dominant (H) and one recessive (h) allele (Hh).

3. If the short-haired cat in the P generation were purebred (HH), all offspring would have short hair, as they would inherit one dominant allele (H) from the short-haired parent and one recessive allele (h) from the long-haired parent, resulting in Hh offspring.

4. The black horse is a hybrid. Since the cross between a black horse (B...) and a brown horse (bb) produced a brown foal (bb), the black horse must carry one dominant allele (B) and one recessive allele (b) - making it a hybrid (Bb).

5. To determine whether a guinea pig with a smooth coat (S...) is a hybrid or a purebred, perform a test cross by mating it with a guinea pig with a rough coat (ss). If all offspring have smooth coats (Ss), the smooth-coated guinea pig is likely purebred (SS). If any offspring have a rough coat (ss), the smooth-coated guinea pig is a hybrid (Ss).

A dominant allele is a variant of a gene that expresses its trait even when only one copy is present in an individual's genotype. In other words, it masks the effect of another variant (allele) of the same gene when they are together.

A recessive allele is a variant of a gene that only expresses its trait when two copies are present in an individual's genotype. The trait associated with the recessive allele is "masked" by the presence of a dominant allele, and it will only be expressed if both copies of the gene are recessive.

The above answer is based on the question below;

In a test cross, the organism with the trait controlled by a dominant allele is crossed with an organism with a trait controlled by a recessive allele. If all offspring have the trait controlled by the dominant allele, then the parent is probably a purebred. If any offspring has the recessive strait, then the dominant parent is a hybrid.

1. Is the long-haired cat in the P generation a hybrid or a purebred? Explain your answer.

2. Is the short-haired cat in the P generation a hybrid or a purebred? Explain your answer.

3. If the short-haired cat in the P generation were purebred, what would you expect the offspring to look like?

4. In horses, the allele for a black coat (B) is dominant over the allele for a brown coat (b). A cross between a black horse and a brown horse produces a brown foal. Is the black horse a hybrid or a purebred? Explain.

5. In guinea pigs, the allele for a smooth coat (S) is dominant over the allele for a rough coat (s). Explain how you could find out whether a

guinea pig with a smooth coat is a hybrid or a purebred.

H= Short hair

h = Long hair

Find more exercises on dominant allele;

https://brainly.com/question/14053639

#SPJ1

Answer: Ba + Co(CN)₃ → Ba(CN)₂ + Co₂O₃

Explanation:

Barium reacts with cobalt (III) cyanide to produce barium cyanide and cobalt (III) oxide according to the following chemical equation:

Ba + Co(CN)₃ → Ba(CN)₂ + Co₂O₃

It is a type of displacement reaction.

Answer:

Explanation:

Structural Levels of the body:
a. Characteristics of Living Things: Living things exhibit certain characteristics such as the ability to grow, reproduce, respond to stimuli, and maintain homeostasis.
b. Cell Specialization: Cells in the body are specialized to perform different functions such as muscle cells for movement, nerve cells for communication, and red blood cells for carrying oxygen.

Skeletal and Muscular System:
a. The Skeletal System: The skeletal system provides support, protection, and movement for the body. It is composed of bones, cartilage, and ligaments.
b. The Muscular System: The muscular system allows movement of the body and helps in maintaining posture. It is composed of muscles, tendons, and ligaments.

Food and Nutrition:
a. Food Pyramid: The food pyramid is a guide for healthy eating that emphasizes the importance of a balanced diet including fruits, vegetables, grains, protein, and dairy.

Digestive System:
a. Enzymes: Enzymes are proteins that help in breaking down food into simpler forms for absorption in the body. They are produced by different organs in the digestive system such as the pancreas, stomach, and small intestine.

Circulatory System:
a. Circulation: The circulatory system is responsible for the transport of blood and nutrients throughout the body. It consists of the heart, blood vessels, and blood.
b. Heart: The heart is a muscular organ that pumps blood to different parts of the body.
c. Blood Vessels: Blood vessels include arteries, veins, and capillaries that transport blood to and from the heart.

Respiratory System:
a. Respiration: Respiration is the process of inhaling oxygen and exhaling carbon dioxide. The respiratory system is responsible for this process and includes the nose, trachea, bronchi, and lungs.

A 10 g piece of metal at 50°C absorbs 900 G of energy after which the temperature of the metal is 350°C. 0.35J/g°C is the specific heat of the metal.

The amount of heat needed to raise a substance's temperature by one degree Celsius in one gramme, also known as specific heat. Typically, calories and joules per gramme per degree Celsius are used as the measurement units of specific heat.

For instance, water has a specific heat of 1 calorie per gramme per degree Celsius. The notion of specific heat was developed by the Scottish scientist Joseph Black in the 18th century as a result of his discovery that equal masses of different substances required varying quantities.

q = m×c×ΔT

900= 10×c×( 350-50)

c=0.35J/g°C

To know more about specific heat, here:

https://brainly.com/question/11297584

#SPJ1

The intital common temperature of copper and water is 9.5°C, under the condition that 10.0 g of ice at -10.0C is placed into 300.0 g of water in a 200.0-g copper calorimeter.

Now to evaluate the initial common temperature of the water and copper calorimeter, we have to apply the formula
m1c1(Tk - Ti) + m2c2(Tk - Ti)
= mcopperccopper(Tk - Ti)

Here,
m1 = mass of water,
c1 =specific heat capacity of water,
m2 = mass of copper calorimeter,
c2 = specific heat capacity of copper calorimeter, mcopper = mass of copper block
ccopper =specific heat capacity of copper.

Here, this equation to evaluate Ti
Ti = (m1c1Tk + m2c2Tk - mcopperccopperTk - m1c1Ti - m2c2Ti) / (m1c1 + m2c2 - mcopperccopper)

Staging the given values into this equation
Ti = (-300.0 g)(4.18 J/g°C)(18.0°C) + (200.0 g)(0.385 J/g°C)(18.0°C) + (10.0 g)(0.385 J/g°C)(18.0°C) / [(300.0 g)(4.18 J/g°C) + (200.0 g)(0.385 J/g°C) - (10.0 g)(0.385 J/g°C)]
Ti = 9.5°C

Hence, the initial common temperature of the water and copper calorimeter was 9.5°C.
To learn more about calorimeter
https://brainly.com/question/30532154
#SPJ1

a) We need 32.6 liters of [tex]O_2[/tex] at 41 °C and 0.307 atm to burn 8.57 L of [tex]C_2H_6[/tex]  at 41 °C and 0.307 atm

b) 18.5 liters of [tex]CO_2[/tex] will be produced at 41 °C and 0.307 atm.

To answer this question, we will use the ideal gas law, which relates pressure, volume, temperature, and number of moles of a gas. We will also use stoichiometry to relate the amount of ethane and oxygen consumed and the amount of carbon dioxide and water produced.

(a) To determine how many liters of [tex]O_2[/tex] are needed to burn 8.57 L of [tex]C_2H_6[/tex] , we first need to convert the volume of ethane to moles using the ideal gas law:
n([tex]C_2H_6[/tex] ) = PV/RT = (0.307 atm)(8.57 L)/(0.0821 L·atm/mol·K)(314 K) = 0.342 mol

From the balanced equation, we see that 2 moles of [tex]C_2H_6[/tex] react with 7 moles of [tex]O_2[/tex] . Therefore, the amount of [tex]O_2[/tex] needed is:
n([tex]O_2[/tex]) = (7/2) n([tex]C_2H_6[/tex]) = (7/2)(0.342 mol) = 1.20 mol

Now we can use the ideal gas law again to calculate the volume of [tex]O_2[/tex] needed:
V([tex]O_2[/tex] ) = n([tex]O_2[/tex])RT/P = (1.20 mol)(0.0821 L·atm/mol·K)(314 K)/(0.307 atm) = 32.6 L

Therefore, 32.6 liters of [tex]O_2[/tex] are needed to burn 8.57 L of [tex]C_2H_6[/tex]  at at 41 °C and 0.307 atm

(b) From the balanced equation, we see that 2 moles of [tex]C_2H_6[/tex] produce 4 moles of [tex]CO_2[/tex] . Therefore, the amount of [tex]CO_2[/tex] produced is:

n([tex]CO_2[/tex]) = 2 n([tex]C_2H_6[/tex]) = 2(0.342 mol) = 0.684 mol

V([tex]CO_2[/tex]) = n([tex]CO_2[/tex])RT/P = (0.684 mol)(0.0821 L·atm/mol·K)(314 K)/(0.307 atm) = 18.5 L

Therefore, 18.5 liters of [tex]CO_2[/tex] at 41 °C and 0.307 atm will be produced.

For more question on ideal gas law

https://brainly.com/question/27870704

#SPJ11

The two true statements about a system are:

A) Systems are a group of objects analyzed as one unit.

B) Energy that moves across system boundaries is covered.

In general, a system can be defined as a group of objects or components that are connected or related to one another in some way, and that can be analyzed as a single unit. The components within a system can interact with each other, and with the environment outside of the system, in various ways. One of the key characteristics of a system is that it has a boundary or interface that separates it from the surrounding environment.

Energy, matter, or other quantities may flow across this boundary, and the interactions between the system and its environment can affect the behavior and properties of the system as a whole.

Overall, systems are a fundamental concept in many fields of science and engineering, and they can be used to model and analyze a wide range of phenomena, from physical systems like engines and circuits, to social and ecological systems like cities and ecosystems.

To learn more about Energy here

https://brainly.com/question/11399976

#SPJ1

The total volume of the solution is 300 mL.

To calculate the total volume of the solution, we simply add the volumes of the ethanol and water together:

The total volume of solution = volume of ethanol + volume of water

= 100 mL + 200 mL

= 300 mL

Therefore, the total volume of the solution is 300 mL.

When two or more compounds are combined to form a solution, the substance present in the smallest amount is known as the solute, and the material present in the largest amount and which dissolves is known as the solvent.

The solute, which can be a solid, liquid, or gas, dissolves in the solvent, which is often a liquid.

In this scenario, 100 mL of ethanol and 200 mL of water are combined to make the solution. The solute in this solution is ethanol, a colorless liquid. Water is a polar solvent that can dissolve a wide range of compounds, including ethanol. When ethanol and water are combined, they dissolve and form a homogeneous mixture.

learn more about ethanol here

https://brainly.com/question/20814130

#SPJ1

To calculate the concentration resulting from the dilution of 500.0 mL of 4.267 M to a volume of 1.85 L, we can use the equation:
M1V1 = M2V2
where M1 is the initial concentration, V1 is the initial volume, M2 is the final concentration, and V2 is the final volume.

Plugging in the given values, we get:
4.267 M)(500.0 mL) = M2(1.85 L)
Simplifying this equation, we get:
M2 = (4.267 M)(500.0 mL) / (1.85 L)
M2 = 1.153 M
Therefore, the concentration resulting from the dilution is 1.153 M.
To calculate the concentration after dilution, you can use the dilution formula: C1V1 = C2V2, where C1 and V1 are the initial concentration and volume, and C2 and V2 are the final concentration and volume.
Given:
C1 = 4.267 M
V1 = 500.0 mL = 0.5 L (converted to liters)
V2 = 1.85 L
Now, find C2:

C2 = (C1 * V1) / V2
C2 = (4.267 M * 0.5 L) / 1.85 L
C2 ≈ 1.153 M
The concentration after dilution is approximately 1.153 M.

For more question on  dilution

https://brainly.com/question/3089319

#SPJ11

To find the concentration resulting from the dilution, we can use the equation:
M1V1 = M2V2
where M1 is the initial concentration, V1 is the initial volume, M2 is the final concentration, and V2 is the final volume.

Plugging in the given values, we get:
(4.267 M)(500.0 mL) = M2(1.85 L)
Simplifying and converting units, we get:
M2 = (4.267 M)(500.0 mL) / (1.85 L)
M2 = 1.16 M
Therefore, the concentration resulting from the dilution is 1.16 M.
To find the concentration after dilution, you can use the dilution formula:
C1V1 = C2V2
where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration, and V2 is the final volume.
Given:
C1 = 4.267 M
V1 = 500.0 mL (0.5 L)
V2 = 1.85 L
Rearrange the formula to solve for C2:
C2 = (C1V1) / V2
Now, plug in the given values:
C2 = (4.267 M * 0.5 L) / 1.85 L
C2 ≈ 1.154 M
So, the resulting concentration after dilution is approximately 1.154 M.

For more question on  dilution

https://brainly.com/question/24881505

#SPJ11

To calculate the amount of aluminum produced from 9.00 tons of Al2O3, we need to use stoichiometry. First, we'll convert the mass of Al2O3 to moles, and then use the balanced chemical equation to find the moles of aluminum. Finally, we'll convert the moles of aluminum back to mass.

1. Convert mass of Al2O3 to moles:
9.00 tons = 9,000 kg
Molar mass of Al2O3 = (2 * 26.98) + (3 * 16.00) = 101.96 g/mol
9,000 kg * (1000 g/kg) = 9,000,000 g
moles of Al2O3 = 9,000,000 g / 101.96 g/mol = 88,258 moles

2. Use balanced chemical equation to find moles of aluminum:
The balanced chemical equation is:
2 Al2O3 → 4 Al + 3 O2
Using stoichiometry, we find the ratio of Al2O3 to Al is 2:4 or 1:2.
moles of Al = 88,258 moles Al2O3 * (2 moles Al / 1 mole Al2O3) = 176,516 moles

3. Convert moles of aluminum back to mass:
Molar mass of Al = 26.98 g/mol
Mass of Al = 176,516 moles * 26.98 g/mol = 4,762,984 g
Mass of Al in tons = 4,762,984 g / (1000 g/kg) / (1000 kg/ton) = 4.76 tons

So, 4.76 tons of aluminum can be produced from 9.00 tons of Al2O3.

For more questions on: aluminum

https://brainly.com/question/30369776

#SPJ11

If heat is going into a system, it means that energy must have come out from the surroundings.

Heat is a form of energy transfer from a hotter object to a cooler one, and the direction of heat flow is always from the hotter object to the cooler one.

Therefore, if heat is entering a system, it must be gaining energy from its surroundings, which are at a lower temperature and therefore have less thermal energy.

Conversely, if heat is leaving a system, it means that energy is being transferred from the system to its surroundings, which are at a higher temperature and therefore have more thermal energy.

Learn more about heat transfer here: https://brainly.com/question/27673846

#SPJ1

If a gaseous sample has a density of 0.978 g/L at 30 °C and 615 torr,  the molar mass of the compound is 24.8 g/mol.

To calculate the molar mass of the compound, we first need to calculate the number of moles present in the gaseous sample using the ideal gas law:

PV = nRT

Where P is the pressure in atm, V is the volume in L, n is the number of moles, R is the gas constant (0.0821 L atm/mol K), and T is the temperature in Kelvin.

Converting the given pressure of 615 torr to atm:
615 torr = 0.811 atm
Converting the given temperature of 30°C to Kelvin:
30°C + 273.15 = 303.15 K

Rounding off to two significant figures, we get:
P = 0.81 atm
T = 303 K

Now, rearranging the ideal gas law equation to solve for n:
n = PV/RT

Substituting the given values:

n = (0.978 g/L) x (1 L) / (0.081 atm x 0.0821 L atm/mol K x 303 K)

n = 0.0394 mol

Next, we can calculate the molar mass of the compound using the formula:

molar mass = mass / mole
molar mass = (0.978 g/L) x (1 L) / 0.0394 mol
molar mass = 24.8 g/mol
Therefore, 24.8 g/mol is the molar mass of the compound.

For more question on ideal gas law

https://brainly.com/question/27870704

#SPJ11

We can use the combined gas law to solve this problem:

(P1V1/T1) = (P2V2/T2)

where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.

We are given that the initial pressure is P1 = 837 mm Hg and the initial volume is V1 = 1.5 × 10^7 L. The initial temperature is T1 = 18.4°C, which we need to convert to Kelvin by adding 273.15:

T1 = 18.4°C + 273.15 = 291.55 K

We are also given that the final pressure is P2 = 707 mm Hg and the final temperature is T2 = -31°C, which we need to convert to Kelvin:

T2 = -31°C + 273.15 = 242.15 K

Now we can solve for the final volume, V2:

(P1V1/T1) = (P2V2/T2)

V2 = (P1V1T2) / (P2T1)

V2 = (837 mm Hg * 1.5 × 10^7 L * 242.15 K) / (707 mm Hg * 291.55 K)

V2 = 5.26 × 10^6 L

Therefore, the volume occupied by the helium gas at the higher altitude is 5.26 × 10^6 L.

Answer:

Na < Al < Mg < S < Cl

Explanation:

Sodium has the smallest ionization energy because it wants to lose an electron as an alkali metal.

Aluminum has the second smallest because losing an electron would leave it with just a full s orbital.

Magnesium has the third smallest because although it's removing an electron from a full s orbital, it has less protons than sulfur and chlorine to keep the electron in the shell.

Sulfur has the second largest because it has more protons to pull at the electrons.

Chlorine has the largest ionization energy because it really wants an electron to fill the p orbital. Due to its number of protons, the element is also very small and it will be difficult to remove an electron.

Answer: 6.11 L

Explanation:

STP= 1atm, 273.15K

Molar mass of CO2=44.01g/mol so n= (12.0/44.01)

PV=nRT

V=(nRT)/P

V=((12.0/44.01)(0.0821)(273.15))/1

V=6.11L

The reaction C₆H₅COOH(aq) + C₆H₅NH₂(aq) ⇌ C₆H₅COO⁻(aq) + C₆H₅NH₃⁺(aq) has an equilibrium constant of 0.3698.

The equilibrium constant (Kb) for the reaction can be calculated using the Ka and Kb values of the reactants and the equation:

Kw = Ka x Kb

where Kw = ion product constant of water (1.0 x 10⁻¹⁴ at 25°C).

Calculate the Kb value for aniline:

Kb = Kw/Ka = (1.0 x 10⁻¹⁴)/(4.3 x 10⁻¹⁰) = 2.33 x 10⁻⁵

Use the Kb value for aniline and the Ka value for benzoic acid to calculate the equilibrium constant (K) for the reaction:

K = Kb/Ka = (2.33 x 10⁻⁵)/(6.3 x 10⁻⁵) = 0.3698

Therefore, the equilibrium constant for the reaction C₆H₅COOH(aq) + C₆H₅NH₂(aq) ⇌ C₆H₅COO⁻(aq) + C₆H₅NH₃⁺(aq) is 0.3698.

Find out more on equilibrium constant here: https://brainly.com/question/19340344

#SPJ1

The rates of reaction for the trial 1 is 8.22 x 10⁻² M⁻² s⁻¹ and 1.10 M⁻² s⁻¹ for traila 2 and 3

To find the reaction rate with respect to U and S, keep the concentration of W constant and vary the concentrations of U and S while measuring the rate.

Assuming the concentration of W in all three trials is constant, choose trial 1 as the reference trial and calculate the rate constant (k) for the reaction with respect to U and S.

For trial 1:

[W] = 0.13 M

Rate = 4.72 x 10⁻⁴ M/s

For trial 2:

[W] = 0.13 M

Rate = 1.18 x 10⁻² M/s

From the equation rate = k[U][S], set up the following ratio of rates:

Rate2/Rate1 = (k[U]2[S]2)/(k[U]1[S]1)

Simplifying:

k = (Rate2/Rate1) x (1/[U]2) x (1/[S]2) x ([U]1) x ([S]1)

Substituting the values from trials 1 and 2:

k = (1.18 x 10⁻² M/s) / (4.72 x 10⁻⁴ M/s) x (1/0.65 M) x (1/1 M) x (0.13 M) x (1 M)

k = 8.22 x 10⁻²M⁻² s⁻¹

Similarly, for trial 3:

[W] = 0.13 M

Rate = 2.95 x 10⁻¹ M/s

Using trial 1 as the reference trial again, calculate the rate constant (k) for the reaction with respect to U and S:

k = (Rate3/Rate1) x (1/[U]3) x (1/[S]3) x ([U]1) x ([S]1)

k = (2.95 x 10⁻¹ M/s) / (4.72 x 10⁻⁴ M/s) x (1/3.25 M) x (1/1 M) x (0.13 M) x (1 M)

k = 1.10 M⁻² s⁻¹

Therefore, the reaction rate with respect to U and S is given by the equation:

rate = k[U][S]

where k = 8.22 x 10⁻² M⁻² s⁻¹ and 1.10 M⁻² s⁻¹ for trials 2 and 3, respectively.

Find out more on reaction rate here: https://brainly.com/question/24795637

#SPJ1

Charles's law of gases states that the density of an ideal gas is inversely proportional to its temperature at constant pressure.

The equation is as follows;

Va/Ta = Vb/Tb

Where;

0.67/362 = 1.12/Tb

0.00185Tb = 1.12

Tb = 605.41K

This temperature in °C is 605.41 - 273 = 332°C

Learn more about Charles's law at: https://brainly.com/question/16927784

#SPJ1

Answer:

1.8mol

Explanation:

this is the ans but in the option there is

not give

The 210.00 g sample of the water with the initial temperature of the 29.0°C absorbs the 7,000.0 J of heat. The final temperature of the water is the 36.9  °C .

The mass of the water = 210 g

The initial temperature = 29.0 °C

The final temperature = ?

The heat energy = 7000 J

The specific heat capacity = 4.184 J/g  °C

The heat energy is expressed as :

Q = m c ΔT

Where,

The m is mass of water = 210 g

The c is specific heat of water = 4.184 J/g  °C

The  ΔT is change in temperature = final temperature - initial temperature

The  ΔT is change in temperature = T - 29.0 °C

7000 = 210 × 4.184 ( T - 29.0  )

7000 = 878.64 ( T - 29.0  )

( T - 29.0  ) = 7.966

T = 36.9  °C

The final temperature is 36.9  °C .

To learn more about specific heat here

https://brainly.com/question/19907993

#SPJ1

To solve this problem, we need to use the balanced chemical equation for the reaction between zinc (Zn) and hydrochloric acid (HCl):

[tex]Zn + 2HCl - > ZnCl_2 + H_2[/tex]

According to the stoichiometry of this equation, one mole of Zn reacts with two moles of HCl to produce one mole of H2. Therefore, we need to determine the number of moles of Zn in 25 g, and then use the mole ratio to find the number of moles of H2 produced.

Finally, we can convert the number of moles of H2 to volume at STP using the molar volume of a gas.

First, we need to calculate the number of moles of Zn in 25 g:

The molar mass of Zn is 65.38 g/mol

The number of moles of Zn in 25 g is:

25 g / 65.38 g/mol = 0.383 mol Zn

Next, we use the mole ratio from the balanced equation to find the number of moles of H2 produced:

According to the balanced equation, one mole of Zn reacts with one-half mole of H2, so we produce 0.5 x 0.383 = 0.192 mol H2.

Finally, we can use the molar volume of a gas at STP to convert the number of moles of H2 to volume:

The molar volume of a gas at STP is 22.4 dm3/mol

Therefore, the volume of H2 produced is:

V = (0.192 mol) x (22.4 dm3/mol) = 4.30 dm3 or 4,300 ml

Therefore, the volume of hydrogen gas produced at STP is 4.30 dm3 or 4,300 ml when 25 g of zinc is added to excess dilute hydrochloric acid at 31°C and 778 mm Hg pressure.

learn more about molar volume here

https://brainly.com/question/11676583

#SPJ1

Diffrences in water temperature in the ocean create movement because bodies of water at different temperatures have different densities.

Water that is colder is generally denser than water that is warmer, so when a body of water with colder, denser water is next to a body of water with warmer, less dense water, a density gradient is established. This gradient creates a difference in pressure between the two bodies of water, with the colder, denser water being at a higher pressure than the warmer, less dense water.

This difference in pressure creates a force that drives the movement of water from the denser, colder region to the less dense, warmer region. This movement of water is known as convection, and it can occur both vertically and horizontally in the ocean. Vertical convection occurs when differences in temperature cause water to rise or sink, while horizontal convection occurs when water moves laterally due to differences in temperature.

Learn more about temperature at:

https://brainly.com/question/25677592

#SPJ1

missing options:

1. as water heats up, the atoms of water more faster.

2. warm water is pulled more by gravity than cold water.

3. warm and cold water mix and reach the same temperature.

4. bodies of water at different temperatures have different densities.