suppose you observe a star orbiting the galactic center at a speed of 1400 km/s in a circular orbit with a radius of 20 light-days. calculate the mass of the object that the star is orbiting.

The cannonball executing projectile motion will be then accelerated downwards due to the gravitational attraction of earth.

Projectile motion is the motion under the only influence of gravitational force.

The cannonball shot from the cliff with certain velocity, will follow a projectile motion. If there is no gravity, the cannonball will continue its horizontal motion according to law of inertia.

But here, due to the gravitational attraction between the Earth and the ball, it will accelerate downwards.

To learn more about projectile motion, click:

https://brainly.com/question/11049671

#SPJ4

An Earth observer can only see half of the celestial sphere at one time. This half changes as the Earth rotates, allowing the observer to see different regions of the celestial sphere over the course of a night or a year.

An Earth observer can see only one-half of the celestial sphere at a time. Here's why:

Since the observer can only see objects above the horizon, the observer can only see the half of the celestial sphere that is currently above their local horizon.

for such more questions on celestial object

https://brainly.com/question/21339977

#SPJ11

The mass of the helicopter is approximately 4254.4 kg.

The horizontal component will be equal to the air resistance force since the helicopter is flying horizontally at a constant speed.

The vertical component of the lift force will balance the weight of the helicopter, so we can use it to find the mass.

First, let's find the horizontal component of the lift force:

Horizontal component = Lift force x cos(78.3°)

Horizontal component = 42500 N x cos(78.3°)

Horizontal component = 42500 N x 0.1919

Horizontal component = 8153.75 N

Now, we know that the horizontal component of the lift force is equal to the air resistance force. So, we can write:

Air resistance force = 8153.75 N

vertical component of the lift force:

Vertical component = Lift force x sin(78.3°)

Vertical component = 42500 N x sin(78.3°)

Vertical component = 42500 N x 0.9816

Vertical component = 41717.5 N

We know that the vertical component of the lift force balances the weight of the helicopter, so:

Weight of helicopter = 41717.5 N

Using the formula:

Weight = mass x gravity

41717.5 N = mass x 9.81

mass = 4254.4 kg

learn more about Air resistance here:

https://brainly.com/question/18770265

#SPJ4

The magnitude of the object's velocity at the end of the 3.0-s interval is approximately 9.2 m/s. The correct answer is option 1) 9.2 m/s.

To find the magnitude of the object's velocity at the end of the 3.0-s interval, we need to first determine the acceleration and then the final velocity in both x and y directions.

1. Calculate acceleration:
a = F/m
a_x = 2.0 N / 2.0 kg = 1.0 m/s² (i direction)
a_y = 4.0 N / 2.0 kg = 2.0 m/s² (j direction)

2. Calculate final velocity in both directions:
v_x = u_x + a_x * t
v_x = 4.0 m/s + 1.0 m/s² * 3.0 s = 7.0 m/s (i direction)

v_y = u_y + a_y * t
v_y = 0 m/s + 2.0 m/s² * 3.0 s = 6.0 m/s (j direction)

3. Calculate the magnitude of the final velocity:
v = √(v_x² + v_y²) = √((7.0 m/s)² + (6.0 m/s)²) = √(49 + 36) = √85 ≈ 9.2 m/s

So, the magnitude of the object's velocity at the end of the 3.0-s interval is approximately 9.2 m/s. The correct answer is option 1) 9.2 m/s.

To learn more about acceleration, refer below:

https://brainly.com/question/12550364

#SPJ11

As a magnet is pushed toward a solenoid the strength of the B field passing through the loops of the solenoid will Increase.

A solenoid is an electrical device which consists of a coil of wire wrapped around a core and is used to convert electrical energy into a linear mechanical force. It acts as a switch in order to control the flow of electricity and is commonly used in a variety of applications, such as door locks, fuel injectors, and relay boards. Solenoids are often used for linear motion, such as in industrial machinery, robotic arms, and linear actuators. They are also used to control valves and pumps in hydraulic systems. Solenoids are made from a variety of materials, such as iron, copper, and aluminum, and their design can vary based on the application.

To learn more about solenoid

https://brainly.com/question/1873362

#SPJ1

This reaction is an example of gamma emission as the gamma rays are emitted during the formation of the stable nucleus from the unstable one. Thus, option C is correct.

When the unstable or parent nucleus undergoes decaying, it forms a stable nucleus without any change in mass and atomic number, but the release of high energy waves called Gamma rays is called Gamma decay or Gamma emission.

Hence, the ideal solution is C) Gamma emission.

https://brainly.com/question/30025290

#SPJ4

The magnitude of the second force is 1710 N.

Force is the product of mass and acceleration.

To calculate the magnitude of the second force, we use the formula below

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Learn more about force here: https://brainly.com/question/25239010

#SPJ1

The speed of red light and blue light is identical in free space, and they both travel at the speed of light.

In free space, both red light and blue light travel at the same speed, which is the speed of light. The speed of light in a vacuum is approximately 299,792,458 meters per second, which is denoted by the letter "c." This value is a fundamental constant in physics and is the maximum speed at which information can be transmitted in the universe. Therefore, the speed of red light and blue light is identical in free space, and they both travel at the speed of light.

the speed of red light and blue light is identical in free space, and they both travel at the speed of light.

Learn more about red light and blue light

brainly.com/question/22015933

#SPJ11

The strength of the magnetic field is 1.28 T.

Step 1: Calculate the mass per unit length of the wire:

m/L = 9.7 g / 0.05 m = 194 g/m

Step 2: Calculate the tension in each spring before the magnetic field is turned on:

F = k * x

where k is the spring constant and x is the displacement from the equilibrium position.

F = 2 * k * 0.0045 m = 0.009 kN

Step 3: Calculate the current in the circuit before the magnetic field is turned on:

I = V / R

where V is the voltage across the circuit and R is the total resistance.

I = 0.009 kN / 14 Ω = 0.00064 A

Step 4: Calculate the magnetic force on the wire:

Fm = BIL

where B is the strength of the magnetic field, I is the current in the wire, and L is the length of the wire.

[tex]Fm = B * 0.00064 A * 0.05 m = 3.2 * 10^-5 B N[/tex]

Step 5: Calculate the additional tension in each spring when the magnetic field is turned on:

[tex]F' = k * (0.0045 m + 0.0030 m) = 0.012 kN[/tex]

Step 6: Equate the magnetic force with the increase in tension:

[tex]Fm = 2 * (F' - F)3.2 * 10^-5 B N = 2 * (0.012 kN - 0.009 kN)B = 1.28 T.[/tex]

To know more about magnetic field click here:

https://brainly.com/question/14848188

#SPJ11

Satellite B has 0.5 times the speed of A meaning Satellite B has half the speed of Satellite A.

To compare the speed of Satellite B to Satellite A, we will use the formula for the orbital speed of a satellite, which is:

v = √(GM/R)

where v is the orbital speed, G is the gravitational constant, M is the mass of the planet, and R is the orbital radius.

Let v_A be the orbital speed of Satellite A and v_B be the orbital speed of Satellite B. We know that the orbital radius of Satellite B (R_B) is four times that of Satellite A (R_A). Therefore, R_B = 4R_A.

Now, we can write the equations for both satellites:

v_A = √(GM/R_A)
v_B = √(GM/R_B)

Since R_B = 4R_A, we can rewrite the equation for Satellite B:

v_B = √(GM/(4R_A))

Now, we can compare v_B and v_A:

v_B/v_A = [√(GM/(4R_A))]/[√(GM/R_A)]

By simplifying the equation, we get:

v_B/v_A = √(R_A/4R_A) = 1/2

So, Satellite B has half the speed of Satellite A. In other words, B has 0.5 times the speed of A.

More satellite speed: https://brainly.com/question/20217939

#SPJ11

The frequency of the vibrations caused by the tire's tread pattern when the car moves at 18.5 m/s is 925 Hz.

To find the frequency of the vibrations caused by the tire's tread pattern, we need to use the given information: the crevice spacing (2.00 cm) and the car's speed (18.5 m/s).

Step 1: Convert the crevice spacing from cm to meters.
1 cm = 0.01 m, so 2.00 cm = 2.00 * 0.01 m = 0.02 m.

Step 2: Calculate the number of crevices the tire passes per second (crevices per meter multiplied by meters per second).
Number of crevices per meter = 1 / 0.02 = 50 crevices/meter.
Number of crevices per second = 50 crevices/meter * 18.5 meters/second = 925 crevices/second.

Step 3: The frequency of the vibrations is equal to the number of crevices passed per second.
Frequency = 925 Hz.

So, the frequency of the vibrations caused by the tire's tread pattern when the car moves at 18.5 m/s is 925 Hz.

To know more about how to find the frequency:

https://brainly.com/question/30389866

#SPJ11

They can cause other types of artifacts in ultrasound imaging.

Enhancement artifact in ultrasound imaging is caused by unexpectedly low acoustic attenuation in the tissue being imaged.

Attenuation refers to the weakening of the ultrasound signal as it passes through tissue, and it is influenced by various factors such as the tissue's density, composition, and structure. When an area of tissue has lower attenuation than its surroundings, more of the ultrasound signal passes through that area, resulting in an increase in signal intensity and brightness on the image. This can give the false impression that the tissue has a higher density or composition than it actually does, leading to an enhancement artifact.

Therefore, the correct answer is c. unexpectedly low acoustic attenuation.

Sound beams bending, linear array transducer architecture, and acoustic energy radiating in a direction other than the beam's main axis are not direct causes of enhancement artifacts. However, they can cause other types of artifacts in ultrasound imaging.

To learn more about enhancement visit:

https://brainly.com/question/31141832

#SPJ11

A really low mass red dwarf can live as long as 100 billion years.

Hence, the correct option is C.

Red dwarfs are the most common type of star in the universe and are smaller and cooler than the Sun. Their mass can range from 0.08 to 0.5 solar masses. The less massive a red dwarf is, the longer it can live because it burns its fuel more slowly.

Red dwarfs generate energy through nuclear fusion, which involves converting hydrogen into helium. The rate of fusion depends on the mass of the star, with less massive stars fusing hydrogen at a slower rate. This means that low mass red dwarfs can burn their fuel for a much longer time than higher mass stars.

Theoretical models predict that red dwarfs with a mass of 0.08 solar masses can have lifetimes of up to 10 trillion years. However, these models are subject to uncertainties and depend on various factors, such as the star's metallicity, rotation rate, and magnetic activity.

In general, low mass red dwarfs are known for their longevity, with some potentially living for much longer than the current age of the universe. This means that they can be important targets for searches for potentially habitable planets around other stars.

Therefore, A really low mass red dwarf can live as long as 100 billion years.

Hence, the correct option is C.

To know more about dwarf here

https://brainly.com/question/31556414

#SPJ4

As the base elevation of a thundercloud gets lower and lower, the possibility of lightning strike increases. Thunderstorms form when warm, moist air rises and cools, forming clouds.

These clouds are known as cumulonimbus clouds, which are tall and have a flat base. The base of a cumulonimbus cloud can vary in height, depending on the temperature and moisture content of the air below it.

The lower the base of a thundercloud, the closer it is to the ground, and the more likely it is to produce lightning strikes. This is because lightning is an electrical discharge that occurs when there is a difference in charge between two objects, such as the cloud and the ground. When the base of a thundercloud is low, it means that the cloud is closer to the ground, which increases the likelihood of a charge difference between the cloud and the ground.

Furthermore, the lower base of a thundercloud can also mean that there is more moisture in the air below it, which can lead to more lightning strikes. This is because moisture in the air can help to conduct electricity, making it easier for lightning to travel from the cloud to the ground.

In conclusion, the lower the base elevation of a thundercloud, the greater the possibility of lightning strike due to the increased proximity to the ground and higher moisture content. It is important to stay indoors and avoid outdoor activities during thunderstorms to avoid the risk of being struck by lightning.

For more such questions on Thundercloud.

https://brainly.com/question/12157651#

#SPJ11

As a result, passive responses are limited to short distances and cannot propagate long distances like action potentials. The given statement is True.

Passive (subthreshold) responses are graded potentials that decay rapidly with distance. These responses occur when a neuron receives small, subthreshold signals from other neurons. They do not reach the threshold for firing an action potential, and therefore do not propagate along the axon. Instead, the signal decays with distance from the site of stimulation, due to the passive leakage of charge across the neuronal membrane. This decay is caused by the resistance of the membrane and the leakiness of the ion channels that make up the membrane. As a result, passive responses are limited to short distances and cannot propagate long distances like action potentials.

To learn more about potentials visit:

https://brainly.com/question/4305583

#SPJ11

The proton and electron will exert equal and opposite forces on each other due to their opposite charges. The force of attraction between them will be significant due to their close proximity of 0.10 nanometers.

However, the proton's larger mass means it will experience a smaller acceleration compared to the electron.
When a proton and an electron are separated by 0.10 nanometers in a vacuum, the forces exerted by the two particles can be best described as attractive forces due to their opposite charges. The proton carries a positive charge, while the electron carries a negative charge. Although the proton is approximately 2000 times more massive than the electron, the electrostatic forces between them will still be equal and opposite, following Newton's third law of motion.

Visit here to learn more about proton and electron:

brainly.com/question/29248303

#SPJ11

The kind of object in which a series of drawn images seem to move as book pages are viewed rapidly, and which is considered as the origin of animation, is called a "flipbook."

A flipbook works by creating the illusion of movement through a rapid sequence of images that show slight changes in position or appearance from one frame to the next. When the pages are flipped quickly, our eyes perceive the images as a continuous motion, giving life to the animated sequence.

The operation of a flipbook is identical to that of animated movies. Your brain is unable to distinguish between the rapidly changing frames with marginally differing illustrations as separate images. The figures appear to be moving, but they actually only "flip" between numerous illustrations, just as in your book, thanks to this technique.

More on flipbook: https://brainly.com/question/15094023

#SPJ11

a) The center of mass (CM) motion will also be tangential, in the same direction as the force.

b) The center of mass (CM) is moving at a speed of 4.24 m/s.

c) The disk is spinning at a speed of 4.99 radians per second.

d) The string has unwrapped from around the rim about 5.05 meters.

(a) The direction of the center of mass (CM) motion can be found using the direction of the applied force. Since the force is applied tangentially to the rim of the disk, the CM motion will also be tangential, in the same direction as the force.

(b) The work-energy principle can be used to find the speed of the CM:

W = ΔK + ΔU

where:

W = work done by the force

ΔK = change in kinetic energy of the disk

ΔU = change in potential energy of the disk

Since the surface is frictionless, there is no work done by friction. The only work done is by the applied force, which causes both translational and rotational motion. Therefore, the work done is:

W = Fd = 35.0 N * 5.2 m = 182 J

The change in kinetic energy can be split into translational and rotational components:

ΔK = (1/2)mv^2 + (1/2)Iω^2

where:

m = mass of the disk

v = speed of the CM

I = moment of inertia of the disk

ω = angular speed of the disk

The moment of inertia of a solid disk about its axis of rotation is (1/2)mr^2, so we can substitute this value:

ΔK = (1/2)mv^2 + (1/4)mv^2 = (3/4)mv^2

The change in potential energy is zero since the disk is not raised or lowered.

Substituting the given values and solving for v, we get:

182 J = (3/4) * 21.0 kg * v^2

v = 4.24 m/s (rounded to two decimal places)

Therefore, the CM is moving at a speed of 4.24 m/s.

(c) The angular speed of the disk can be found using the formula:

v = rω

where r is the radius of the disk. Substituting the given values and solving for ω, we get:

ω = v/r = 4.24 m/s / 0.85 m = 4.99 rad/s (rounded to two decimal places)

Therefore, the disk is spinning at a speed of 4.99 radians per second.

(d) The distance of string that has unwrapped from around the rim is equal to the distance traveled by the CM, which is given as 5.2 m. The circumference of the disk is 2πr, so the fraction of the circumference that has unwrapped is:

fraction unwrapped = distance traveled / circumference

= 5.2 m / (2π * 0.85 m)

= 0.966

Multiplying by the total length of string wrapped around the rim, which is equal to the circumference, we get:

length of string unwrapped = fraction unwrapped * circumference

= 0.966 * 2π * 0.85 m

= 5.05 m (rounded to two decimal places)

Therefore, about 5.05 meters of string has unwrapped from around the rim.

Learn more about center of mass

brainly.com/question/28996108

#SPJ11

When the current in both wires is doubled, the magnitude of the new magnetic force on each wire is 4 times the original force, which corresponds to option B) 4F.

When the current in both wires is doubled, the magnitude of the new magnetic force on each wire is:A) 8F

Here's a step-by-step explanation:

1. The magnetic force (F) between two parallel wires carrying current is given by the formula:

F = (μ₀ × I₁ ×I₂ ×L) / (2 × π × d)

where μ₀ is the permeability of free space, I₁ and I₂ are the currents in the wires, L is the length of the wires, and d is the distance between the wires.

2. Now, let's double the current in both wires, so the new currents are 2I₁ and 2I₂.

3. Substitute the new currents into the formula:

F' = (μ₀ × (2I₁) × (2I₂) × L) / (2 × π × d)

4. Simplify the equation:

F' = (4 × μ₀ × I₁ × I₂ ×L) / (2 × π ×d)

5. Notice that the original force equation (F) is a part of the new force equation (F'):

F' = 4 × (μ₀ ×I₁ × I₂ ×L) / (2 × π ×d)

6. Since the term in the parentheses is equal to the original force (F), the new force is:

F' = 4 × F

So, when the current in both wires is doubled, the magnitude of the new magnetic force on each wire is 4 times the original force, which corresponds to option B) 4F.

To learn more about current https://brainly.com/question/1100341?cb=1681924220551

#SPJ11

According to Lenz's law, the induced current inside the coil must be flowing in a direction that creates a magnetic field opposing the change in the external magnetic field.

Since the external magnetic field is decreasing as the magnet moves away from the screen, the induced current must be flowing in a direction that creates a magnetic field pointing into the screen to oppose this change. Therefore, the induced current inside the coil is flowing in a clockwise direction.

The strength of the magnetic field is directly proportional to the current in the wire. The strength of the magnetic field is inversely proportional to the distance from the wire

Learn more about magnetic field:

https://brainly.com/question/14411049

#SPJ11

force, horizontal force, mass, acceleration

Answer:

To calculate the horizontal force required, we need to use the formula:

force = mass x acceleration

Given that the mass of the sprinter is 62 kg and the acceleration is not given, we need to use the information provided in the question.

Assume that the acceleration produced is 4.5 m/s^2. Therefore,

force = 62 kg x 4.5 m/s^2

Solving this equation, we get:

force = 279 N (rounded to two significant figures)

Therefore, the sprinter must exert a horizontal force of 279 N on the starting blocks to produce the given acceleration.

To know more about force:

https://brainly.com/question/10564289?

#SPJ11

The sprinter must exert a horizontal force of approximately 298 N on the starting blocks to produce the desired acceleration.

The horizontal force required to produce a given acceleration can be found using the equation:

F = ma

where F is the force, m is the mass, and a is the acceleration.

In this case, the mass of the sprinter is 62 kg, and the desired acceleration is[tex]4.8 m/s^2[/tex]. Therefore:

F = (62 kg) x (4.8 [tex]m/s^2[/tex]) = 298 N

So the sprinter must exert a horizontal force of approximately 298 N on the starting blocks to produce the desired acceleration.

Learn more about the force,

https://brainly.com/question/13191643

#SPJ4

The correct answer about luminosity of the star is c. there is insufficient information to answer this question.

The luminosity of the star is dependent on the surface temperature and it's size. It implies that the stars with same size and higher temperature will have higher luminosity due to higher emission of energy per unit surface area.

Similarly, at the same temperature, the star of bigger size will be more luminous. Now the question states both the variables without exact information for comparison making it difficult to determine.

Learn more about luminosity -

https://brainly.com/question/6933301

#SPJ4

If a pure gaseous element is subjected to an electrical discharge, the gas will glow because the electrical discharge causes the gas to become excited and emit radiation.

The resultant emission spectrum will be unique to the specific element, allowing scientists to identify which element is present. This phenomenon is known as spectroscopy, and it is used in various fields of science to study the composition and properties of materials. When a pure gaseous element (hot sample of gas) is subjected to an electrical discharge, the gas will glow and emit radiation. This phenomenon occurs because the electrical discharge excites the gas molecules, causing them to release energy in the form of light when they return to their lower energy states. The resultant glow and emitted radiation are characteristic of the specific element and can be analyzed using techniques like spectroscopy to identify the element's unique properties.

Learn more about spectroscopy :

https://brainly.com/question/28523860

#SPJ11

The resultant speed of the kick is 26.13 m/s horizontally.

The velocity of the soccer, v₁ = 7 m/s

Velocity with which the ball is kicked, v₂ = 30 m/s

Angle at which ball is kicked, θ = 10°

After kicking, the ball will follow a projectile motion.

The resultant speed of the kick,

v = √v₁² + (v₂² cos²10)

v = √49 + 633.6

v = 26.13 m/s

To learn more about projectile motion, click:

https://brainly.com/question/11049671

#SPJ4

The type of collision that occurs when two cars collide, lock bumpers, and move together after the collision is an inelastic collision.

When two objects collide, the type of collision that occurs is determined by whether or not kinetic energy is conserved. In an elastic collision, kinetic energy is conserved, meaning that the total kinetic energy of the objects before the collision is equal to the total kinetic energy of the objects after the collision.

In an inelastic collision, kinetic energy is not conserved, and some or all of the kinetic energy is transformed into other forms of energy, such as heat, sound, or deformation of the objects involved in the collision. In the case of two cars colliding and locking bumpers, the kinetic energy of the cars before the collision is transformed into other forms of energy, such as deformation of the cars' frames and the sound of the impact.

After the collision, the cars are stuck together and moving as a single object, indicating that momentum is conserved. Momentum is always conserved in collisions, regardless of whether they are elastic or inelastic. In the case of the two cars colliding and locking bumpers, the momentum of the cars before the collision is equal to the momentum of the cars after the collision, even though some of the kinetic energy has been lost.

In conclusion, when two cars collide, lock bumpers, and move together after the collision, this is an example of an inelastic collision, where kinetic energy is not conserved, but momentum is conserved.

This is an inelastic collision. In an inelastic collision, kinetic energy is not conserved, and the colliding objects stick together after the collision. In this case, the two cars have locked bumpers and moved together after the collision, indicating that they have become stuck together and are moving as a single object.

To learn more about kinetic energy visit: https://brainly.com/question/26472013

#SPJ11

The acceleration of the elevator is 1.19 m/s^2 upward, which is closest to option (2) 1.2 m/s^2 upward.

The tension in the string supporting the 4.0-kg object is equal to its weight (mg), which is given as 44 N. Therefore,

mg = 44 N

where m is the mass of the object and g is the acceleration due to gravity.

Solving for m, we get:

m = 44 N / g

Now, let's consider the forces acting on the object in the elevator. In addition to its weight, there is also a tension force acting on it due to the string. If the elevator is accelerating upward with an acceleration a, then the net force acting on the object is:

F_net = T - mg = ma

where T is the tension force, which is given as 44 N, and m is the mass of the object.

Substituting the given values, we get:

44 N - (4.0 kg) * (9.81 m/s^2) = (4.0 kg) * a

Simplifying and solving for a, we get:

a = (44 N - 39.24 N) / (4.0 kg) = 1.19 m/s^2

The negative sign on 39.24 N indicates that it is acting in the opposite direction to the tension force.

Therefore, the acceleration of the elevator is 1.19 m/s^2 upward, which is closest to option (2) 1.2 m/s^2 upward.

To learn more about upward visit:

https://brainly.com/question/8737053

#SPJ11

A turbine takes in 1000-K steam and exhausts the steam at a temperature of 500 K. then its maximum theoretical efficiency of this system is

A heat engine is a system which converts heat into useful work. Carnot engine is an ideal engine which has maximum efficiency than any other engines. Carnot has showed that "no engine can be more efficient than Carnot engine and the 100% efficient engine can not be existed". It takes heat from the reservoir to do some work and it discharges some amount of heat to the sink. Reservoir is know as hot body and sink is know as cold body. Efficiency of the heat engine is given by,

Efficiency, η = output energy /input energy

Efficiency is nothing but to measure how much is the efficient  an engine or a device is.

in this problem,

1000 K steam is given to the turbine and it is getting  500 K steam at exhaust. it means that 500K of steam out of 1000K  is responsible for useful work.

hence efficiency = 500/1000 ×100 %=  50 %

hence the theoretical efficiency of this system 50%.

To know more about turbine :

https://brainly.com/question/928271

#SPJ4.

It is difficult to predict the exact path the ping pong ball will follow.

The path the ping pong ball will follow when it leaves the track depends on its velocity and direction of motion. If the ball has enough velocity and momentum, it will continue moving in a straight line tangent to the point where it left the track. If the ball has insufficient velocity and momentum, it will fall due to gravity and follow a parabolic path downwards. The curvature of the circular track may also cause the ball to curve in a particular direction, depending on the direction of its initial motion and the angle at which it exits the track. However, without additional information about the specifics of the situation, it is difficult to predict the exact path the ping pong ball will follow.

To learn more about additional visit:

https://brainly.com/question/29053821

#SPJ11

The resistance formula is an equation that allows us to calculate the resistance of a conductor given its dimensions and the properties of its material. The formula is: R = (ρ [tex]\times[/tex]L) / A.

The resistance of a conductor is a measure of how difficult it is for an electric current to flow through it. The resistance is determined by several factors, including the material of the conductor, its length, and its cross-sectional area. The resistance formula is an equation that allows us to calculate the resistance of a conductor given its dimensions and the properties of its material.

The formula is:

R = (ρ [tex]\times[/tex] L) / A

where R is the resistance, ρ is the resistivity of the material, L is the length of the conductor, and A is its cross-sectional area.

The resistivity (ρ) of a material is a measure of how well it conducts electricity. Materials with high resistivity, such as rubber or glass, are poor conductors of electricity, while materials with low resistivity, such as copper or aluminum, are good conductors of electricity. Resistivity is measured in ohm-meters (Ω⋅m).

The length (L) of a conductor is the distance between its two ends, measured in meters (m). The longer the conductor, the greater its resistance, since the electrons have to travel a longer distance through the material, encountering more atoms and experiencing more collisions.

The cross-sectional area (A) of a conductor is the area of the cross-section of the conductor perpendicular to the direction of the current flow, measured in square meters (m²). The larger the cross-sectional area, the lower the resistance, since the electrons have more room to move through the material and encounter fewer collisions.

By combining these three factors in the resistance formula, we can calculate the resistance of a conductor.

To learn more about resistance visit: https://brainly.com/question/30799966

#SPJ11