Answer:
Explanation:
3
Electricity is produced in a hydroelectric plant when moving water turns a turbine.
Which describes this energy transformation from the turning turbine to electricity?
A
kinetic energy into electric energy
B
nuclear energy into electrical energy
С
thermal energy into electric energy
chemical energy into electric energy
Answer:
It involves both energy transformation and energy transfer.
Explanation:
In the hydroelectric power plant, the energy is transformed from kinetic energy to electricity. Therefore, option (A) is correct.
How is the energy transformed in the hydroelectric power plant?In the hydroelectric power plant, electric energy is generated using water from a turbine. The moving water is used to propel the turbines. At first, a large amount of the flowing water is stored across the dams. The kinetic energy of moving water is stored as potential energy in the dams.
Then the stored water will fall on the turbines and rotate the turbines which causes the potential energy of water to be used to turn the turbines which is mechanical energy.
Therefore, the potential energy of water is converted into mechanical energy. Then the rotating turbines generate electricity and the mechanical energy is converted into electrical energy.
Therefore, the hydroelectric power plant converts the kinetic energy of water into electrical energy.
Learn more about the hydroelectric power plant, here:
https://brainly.com/question/2635539
#SPJ2
An archer shoots an arrow. Consider the action force to be the bowstring against the arrow. The reaction to this force is the:_____________
a. friction of the ground against the archer's feet.
b. grip of thhe archer's hand on the bow.
c. arrow's push against the bowstring.
d. combined weight of the arrow and bowstring
e. air resistance against the bow arrow.
Answer:
c. arrow's push against the bowstring.
Explanation:
Newtons third law of motion describe the relationship between action and reaction forces. Thus when the action force is applied by the bowstring against the arrow, a reaction to this force is supplied by the arrow's push against the bowstring.
If these two forces are not equal and opposite, the arrow would not move as expected. The elastic property of the bowstring propels the arrow at a rate which is due to the potential energy it has gained due to the stretching force.
an inductive argument guarantees its conclusion
True
False
Answer:
False
Explanation:
inductive arguments have some evidence but do not have full assurance of truth of the conclusion
Plant cells have It is used for photosynthesis
When are zeros significant when found to the trailing (to the right) of the decimal point?
Answer:
Usually, zeroes are found to the right of a decimal point in significant numbers if you have something like [tex]7\frac{1}{100000000000000000000000000}[/tex] (exaggerated example of course), which is when you have a number that is very very close to the integer before it, but isn't that integer.
If you measured the final velocity of the car to be 1 m/s and the initial mass of the car remains the same, how much coal was added to the car in kg
Complete Question
The complete question is shown on the first uploaded image
Answer:
a
[tex]p = 14033.7 \ kg\cdot m/s[/tex]
b
[tex]v = 1.22 \ m/s[/tex]
c
[tex]m_2 = 9506.7 \ kg[/tex]
Explanation:
From the question we are told that
The mass of the coal car is [tex]m_1 = 4527 \ kg[/tex]
The velocity is [tex]v_i = 3.1 \ m/s[/tex]
The load of coal dropped is [tex]m_2 = 6952 \ kg[/tex]
Generally the momentum of the system before the coal is added is mathematically represented as
[tex]p = m_j * v_i[/tex]
=> [tex]p = 4527 * 3.1[/tex]
=> [tex]p = 14033.7 \ kg\cdot m/s[/tex]
Generally from the law of momentum conservation is mathematically represented as
[tex]m_1 * v_i + m_2 * v_2 = (m_1 + m_2 )v[/tex]
Here [tex]v_2[/tex] is the velocity of the load before it is dropped and the value is 0 m/s
So
=> [tex]v =\frac{m_1 * v_i }{m_1 + m_2}[/tex]
[tex]v = \frac{4527 * 3.1 }{( 4527 + 6952 )}[/tex]
=> [tex]v = 1.22 \ m/s[/tex]
When v = 1m/s and [tex]m_1[/tex] remain the same
Then
=> [tex]1 =\frac{4527 * 3.1 }{4527 + m_2}[/tex]
=> [tex]4527 + m_2 = 14033.7[/tex]
=> [tex]m_2 = 9506.7 \ kg[/tex]
where was the position of the singularity before the big bang ?
Doing specific exercises to improve a particular skill or type of health fitness is called training? True or false
A plant dying after being exposed to poison represents a physical change.
True
False
Answer:
It does not represent a physical change
Answer:
chemical change as death is irreversible
If you had a string tied firmly to a post, and you created a wave that went down the string, why do you think would happen as the wave reached the post?
A.
B.
C.
D.
Ethan drove a 1500 kg car around a circular track with a radius of 75 m. If the magnitude of the centripetal acceleration is 2 m/s2, what is the car's speed?
A)2.25 m/s
B)20 m/s
C)37.5 m/s
D)150 m/s
Answer:
12.25 m/s
Explanation:
The following data were obtained from the question:
Mass (m) = 1500 Kg
Radius (r) = 75 m
Centripetal acceleration (a) = 2 m/s²
Velocity (v) =?
Centripetal acceleration (a) is related to the velocity (v) and radius (r) according to the following formula:
a = v²/r
Thus, we can obtained the velocity of the car by using the above formula as illustrated below:
Radius (r) = 75 m
Centripetal acceleration (a) = 2 m/s²
Velocity (v) =?
a = v²/r
2 = v²/75
Cross multiply
v² = 2 × 75
v² = 150
Take the square root of both side.
v = √150
v = 12.25 m/s
Thus, the speed of the car is 12.25 m/s.
An elevator is pulled up by a cable with a force of 65,000 N. The upward acceleration of the elevator is 1.8 m/s/s. What is the mass of the elevator?
a. 1.8 kg.
b. 1700 kg.
c. 54880 kg.
d. 5600 kg.
e. 36111 kg.
Answer:
36111 kg
Explanation:
Given
Force = 65000N
Acceleration = 1.8m/s²
Required
Determine the mass of the elevator
This question will be answered using the following Force formula.
Force = Mass * Acceleration
Substitute values for Force and Acceleration
65000N = Mass * 1.8m/s²
Make Mass the subject
Mass = 65000N/1.8m/s²
Mass = 36111.11 kg
From the list of given options, option E answers the question.
A 50 N girl climbs the flight of stairs in 3 seconds. How much work does she
perform? How much power does she use? *
Only mirrors reflect light? True or false?
False - Every object which is not transparent and translucent reflect light. In order to see colours, the object absorb light and reflect the light we see.
ke...
11. Table salt, NaCl, is a classic binary ionic compound. (4 points)
a. What is the oxidation number of Na? Of Cl?
ave...
Answer:
+1
-1
Explanation:
The oxidation number of Na in NaCl is +1 and that of Cl is -1.
For simple ions, the oxidation number is the charge they carry.When NaCl is oxidized we have;
NaCl → Na⁺ + Cl⁻
In this process, Na will lose an electron to become Na⁺ and thus isoelectronic with Ne, Cl will gain the electrons to become Cl⁻ and thus isoelectronic with Argon.
A man driving a car at 35 mph hits his brakes suddenly to avoid hitting a dog.
Everything in the front seat of his car slides forward and into the floorboard. Which of
Newton's laws does this illustrate?
Answer:
Inertia; Newton's First Law
Explanation:
When you hit you're breaks, the force you feel that pulls you forward is due to inertia.
Newton's first law says that "every object will remain at rest or in uniform motion in a straight line unless compelled to change its state by the action of an external force." The question is a perfect example of this.
It is due to the inertia of motion of the objects that they fall on the floor bed. This is also called Newton's first law of motion.
What is the name of Newton's first law of motion?Newton's first law of motion is known as the law of inertia.
Given is a man who is driving a car at 35 mph hits his brakes suddenly in order to avoid hitting a dog. During the incident, everything in the front seat of his car slides forward and into the floorboard.
The property of body by virtue of which it resist any change in its state of rest or uniform motion is called inertia of body. When the car was moving at 35 mph, every object on front seat was also moving with the same speed. However, when the brakes were applied, they were applied on the car and not on the objects in the front seat. Hence, they keep moving forward and stop only when they strike and fall down. This is called inertia of motion. This is Newton's first law of motion.
Therefore, it is due to the inertia of motion of the objects that they fall on the floor bed. This is also called Newton's first law of motion.
To learn more about Newton's laws of motion, visit the link below-
https://brainly.com/question/974124
#SPJ2
Which material is a composite? A. gold B.silicon C.polycarbonate D.aluminum
Answer:
Correct answer is polycarbonate not gold
Explanation:
Fast and safe heart rate for workouts is called muscular strength? True or false
Answer:
False
Explanation:
Answer:
false :3
hope this helps
Define SI system of measurement.
Answer:
SI system - a complete metric system of units of measurement for scientists; fundamental quantities are length (meter) and mass (kilogram) and time (second) and electric current (ampere) and temperature (kelvin) and amount of matter (mole) and luminous intensity (candela); "Today the United States is the only country
Explanation:
hope this helps u, sorry if it doesn't.
Answer:
International System of Units (SI), French Système International d'Unités, international decimal system of weights and measures derived from and extending the metric system of units. Adopted by the 11th General Conference on Weights and Measures (CGPM) in 1960, it is abbreviated SI in all languages
How much thermal energy (in kcal) is required to change a 43 g ice cube from a solid at - 16.5 oC to steam at 11.5 oC above boiling
Answer:
The total thermal energy required is 8.93 Kcal
Explanation:
Given;
mass of the ice cube, m = 43 g
specific heat capacity of water, Cp = 4.18 J/gc
specific latent heat of fusion of ice, Cf = 334 J/g
First step, determine the heat needed to raise the temperature of the ice from -16.5 °C to 0° C
Q₁ = mCp[0 - (-16.5)]
Q₁ = 43 x 4.18(16.5)
Q₁ = 2965.71 J
Second step, determine the latent heat of fusion of ice at 0°C
Q₂ = mCf
Q₂ = 43 x 334
Q₂ = 14362 J
Third step, determine the quantity of heat required to raise the temperature of the water initially at 0°C to above 11.5 °C of boiling point of water.
The final temperature of the water = 11.5 °C + 100° C = 111.5 °C
Q₃ = mCp Δθ
Q₃ = 43 x 4.18 (111.5 - 0)
Q₃ = 20041 J
Total thermal energy required = Q₁ + Q₂ + Q₃
Total thermal energy required = 2965.71 J + 14362 J + 20041 J
Total thermal energy required = 37,368.71 J
Total thermal energy required = 8.93 Kcal
A good alternative to sit ups is
A. Crunches
B. Leg Raises
C. Side Twists
A robot that is exploring the surface of a planet has a mass of 120.4 kg. If the
gravitational force acting on the robot is 655.2 N downward, what is the robot's free-
fall acceleration?
Answer:
4.65.3 heehiwijwjwwjwhh
Explanation:
behsjjejejnndjjje
Answer:
D
Explanation:
Hurry please
The distance from wave to wave is called what
Answer:
Wavelength
Explanation:
A boat can travel 2.30 m/s in still water. If the boat points its prow directly across a stream whose current is 1.80 m/s , what is the magnitude of the velocity of the boat relative to the shore?
Answer:
A boat can travel 2.30 m/s in still water. (a) If the boat points its prow directly across a stream whose current is. ... (a) What is the velocity (magnitude and direction) of the boat relative to the shore? ... The boat's velocity with respect to the shore, , is the sum of its velocity with respect to the water
Explanation:
Which statement is part of Dalton's atomic theory?
Matter is composed of small particles called atoms.
Atoms can be divided into their subatomic particles.
Atoms are able to be seen with proper spectroscopy equipment.
Chemical reactions can change atoms from one type to another.
Answer:
Dalton’s atomic theory was a scientific theory on the nature of matter put forward by the English physicist and chemist John Dalton in the year 1808. It stated that all matter was made up of small, indivisible particles known as ‘atoms’.
Explanation:
Atoms can be divided into their subatomic particles.
The statement that is part of Dalton's atomic theory is as follows: Matter is composed of small particles called atoms.
What is Dalton's atomic theory?John Dalton is a scientist that first stated the theory of chemical combination in 1803.
The components of these theory are as follows:
Elements consist of indivisible small particles called atoms.All atoms of the same element are identical i.e. different elements have different types of atom. Atoms can neither be created nor destroyedTherefore, according to this question, the statement that is part of Dalton's atomic theory is as follows: Matter is composed of small particles called atoms.
Learn more about Dalton's atomic theory at: https://brainly.com/question/11855975
#SPJ2
What magnification would be obtained if an eyepiece with a focal length of 0.38 m was placed on telescope?
Answer:
This question is incomplete
Explanation:
This question is incomplete because the telescope's focal length was not provided. The formula to be used here is
Magnification = telescope's focal length/eyepiece's focal length
The eyepiece's focal length was provided in the question as 0.38 m.
NOTE: Magnification can be described as the power of an instrument (in this case telescope) to enlarge an object. It has no unit and thus the two focal lengths mentioned in the formula above must be in the same unit (preferably meters since one of them is in meters already).
what is the state of y when y = k/x, x is halved.
Answer:
y becomes doubled.
Explanation:
If;
y = [tex]\frac{k}{x}[/tex]
what is the state of y when x is halved;
the given expression is an inverse relationship. When y increases, x is supposed to decrease and vice versa.
if x is halved; x = [tex]\frac{x}{2}[/tex]
[tex]\frac{k}{\frac{x}{2} }[/tex] = [tex]\frac{2k}{x}[/tex]
Now compare :
[tex]\frac{k}{x}[/tex] : [tex]\frac{2k}{x}[/tex]
we see that y becomes doubled
describe how you would measure the diameter of a tennis ball
Suppose that the potential energy of a body at a certain height is 200 J. If the body falls, what is its kinetic energy just as it reaches the ground?
Answer:
200j
Explanation:
The kinetic energy just as it reaches the ground is 200J.
What is Potential energy?Potential energy is defined as the energy stored within an object that exists as a result of the state, position or arrangement of the object. It is one of the two primary forms of energy while the other is kinetic energy. The stored energy is released when there is a change in the state, position or arrangement of the object.
This is the stored energy which depends upon the relative position of various parts of a system such as a spring has more potential energy when it is compressed or stretched.
Initially the potential energy of the body is 200 J but when it is released, its potential energy is converted into kinetic energy. When the body just touches the ground, the kinetic energy becomes equal to the potential energy.
Thus, the kinetic energy just as it reaches the ground is 200J.
Learn more about Potential energy, here:
https://brainly.com/question/24284560
#SPJ2
What part of the body acts as levelers
Answer: your feet are the foundation! Even though all your body parts are connected and affect one another, your feet are what we at Foot Levelers call, the "foundation".
Explanation:
