plss helpppssss
6 th grade math

The polynomial is factored to y²(x³ - 7³y³)

Note that polynomials are described as expressions that are made up of terms, variables, coefficients, factors and constants.

Also, they have a degree greater than one.

Index forms are also seen as forms used to represent values that are too large or small in more convenient forms.

From the information given, we have that;

x³y²-343y⁵

Now, find the cube value of 343, we have;

343 = 7³

Substitute the value

x³y²- 7³y⁵

Factorize the common terms, we have;

y²(x³ - 7³y³)

Learn about polynomials at: https://brainly.com/question/4142886

#SPJ1

The probability of the adults being chosen this way by chance is less than 0.01 interprets that group is more likely to choose men over women

A group conducting a survey randomly selects adults in a certain region. Of the 2,500 adults selected, 1,684 are men. The men and women have an equal chance The result of the survey is significant at the 0.01 level which means that the probability of group selection being the result of chance is 0.01 or less because the event is least likely to happen the group is more likely to select men over women.

To know more about probability click here :

https://brainly.com/question/30034780

#SPJ4

Answer:

C

Step-by-step explanation:

first fine the nth term

a+(n-1)d

509+7n+7

516-7n

then equate the ans to the nth term

495=516-7n

7n=516-495

7n= -21

n= -3

Since there are multiple colors, the theoretical probability of selecting any one color would be 1/total number of colors, which is 1/6.

Theoretical probability is the probability of an event occurring based on all possible outcomes. In this case, if the bag contained an equal number of each color of bead, then the theoretical probability of selecting any one color of bead would be 1/total number of colors.

To find the experimental probability, we need to calculate the number of times each color was selected and divide by the total number of selections. Since each student is replacing the bead, the probability of selecting any one color of bead remains the same. Therefore, the experimental probability of selecting any one color of bead should also be 1/6.

However, due to the randomness of the selection process, the experimental probability may not be exactly equal to the theoretical probability. The color for which the experimental probability is closest to the theoretical probability would be the color that has been selected the most number of times, as this would provide the most accurate representation of the experimental probability.

Therefore, we need to record the number of times each color has been selected and calculate the experimental probability for each color. The color with the experimental probability closest to 1/6 would be the color for which the theoretical probability is closest to the experimental probability.

Know more about theoretical probability here:

https://brainly.com/question/31264350

#SPJ11

Answer:

B

Step-by-step explanation:

Every fifth people means one person from 5 people in total. So when we convert that into numbers, it becomes  [tex]\frac{1}{5}[/tex].

And in total there are 85 people involved, so the answer is

[tex]85[/tex] × [tex]\frac{1}{5}[/tex]

Answer:

Step-by-step explanation:

correct asnswer b

The measure of angle U to the nearest tenth is 39.6°

The cosine Rule says that the square of the length of any side of a given triangle is equal to the sum of the squares of the length of the other sides minus twice the product of the other two sides multiplied by the cosine of angle included between them.

C² = a²+b²-2abcosC

450² = 360²+110²+2(110)(360)cosU

202500 = 129600+ 12100+ 79200cosU

202500 = 141700+79200cosU

79200cosU = 202500-141700

79200cosU = 60800

cos U = 60800/79200

cos U = 0.77

U = 39.6°( nearest tenth)

learn more about cosine rule from

https://brainly.com/question/23720007

#SPJ1

If a scale dilates a two-dimensional object by a factor of 2/3, it means that the image of the object will be reduced by a factor of 2/3. In other words, the length and width of the image will be 2/3 of the length and width of the original object.

For instance, consider a rectangle with length L and width W. If we dilate this rectangle by a factor of 2/3, the new length and width of the rectangle will be (2/3)L and (2/3)W, respectively. The area of the new rectangle will be (2/3)L x (2/3)W = (4/9)LW, which is 4/9 of the original area. This means that the image is smaller than the original rectangle, and this type of dilation is called a reduction.

Dilations can be used in different applications of mathematics, such as geometry, trigonometry, and algebra. They are useful for changing the scale or size of an object in a proportional way, without altering its basic shape or characteristics.

To learn more about rectangle here

https://brainly.com/question/29123947

#SPJ4

The correct answer is (C) as the height of the pole is 8.7 meters.

What are Trigonometric functions?

Trigonometric functions are mathematical functions that relate the angles and sides of a right triangle.

Tangent (tan): the ratio of the length of the side opposite an angle to the length of the side adjacent to the angle.

We can use the tangent function to solve this problem.

Let's call the height of the pole "h" and the length of the rope "r".

We know that the length of the shadow cast by the pole is 11.6 meters, and the angle between the sun's rays and the ground is 36.8°. This means that:

tan(36.8°) = h / 11.6

To solve for "h", we can rearrange this equation to get:

h = 11.6 * tan(36.8°)

Using a calculator, we find that h ≈ 8.7 meters.

So the height of the pole is approximately 8.7 meters. Therefore, the correct answer is (C) 8.7.

To know more about trigonometric functions visit:

brainly.com/question/30339626

#SPJ1

The difference between the outcomes when selected with or without replacement is B. 10 outcomes.

With Replacement:

When you select two coins with replacement, you put the first coin back in the jar before selecting the second coin. This means that there are 10 possibilities for each selection. So, the number of outcomes for selecting two coins with replacement is 10 x 10 = 100 outcomes.

Without Replacement:

When you select two coins without replacement, you don't put the first coin back in the jar before selecting the second coin. This means that after selecting the first coin, there are 9 coins left in the jar for the second selection. So, the number of outcomes for selecting two coins without replacement is 10 x 9 = 90 outcomes.

Difference = 100 outcomes - 90 outcomes

Difference = 10 outcomes

Find out more on outcomes at https://brainly.com/question/5467250

#SPJ1

Using approximation as x = 10, the estimation of y = 4.06 cm.

We need to find the area of the triangular cross-section of the prism. Since it is an isosceles right-angled triangle, we know that the two legs are equal in length, so let's call them x.

The area of a triangle is 1/2 * base * height, and in this case, the base and height are both x, so the area is 1/2 * x * x, or x^2/2.

Now, we can use the formula for the volume of a prism, which is V = area of base * height. In this case, the volume is 203 cm, and the height is y, so we can write:

203 = x^2/2 * y

To estimate the value of y, we need to make an assumption about the value of x. Since we don't have any information about it, let's assume it is about 10 cm (this is just an approximation).

Plugging in x = 10, we get:

203 = 10^2/2 * y
203 = 50 * y
y = 203/50
y ≈ 4.06 cm

So our estimate for y is 4.06 cm. Remember to include all the necessary terms and the final line, which should say: Estimate for y is 4.06 cm.

Learn more about Estimation:

https://brainly.com/question/28416295

#SPJ11

The probability that a customer who buys a washer also buys a dryer is 0.297 or approximately 30%.

To find the probability that a customer who buys a washer also buys a dryer, we need to use conditional probability.

Let's start by finding the probability of a customer buying a washer and a dryer, which is given as 11%.

Now, we know that 11% of customers buy both a washer and a dryer. We also know that 37% of customers buy a washer.

Using these two pieces of information, we can find the probability of a customer buying a dryer given that they have already bought a washer. This is the conditional probability we are looking for.

The formula for conditional probability is:

P(D | W) = P(D and W) / P(W)

where P(D | W) is the probability of buying a dryer given that a washer has already been purchased, P(D and W) is the probability of buying both a dryer and a washer, and P(W) is the probability of buying a washer.

Substituting the values we have:

P(D | W) = 0.11 / 0.37

P(D | W) = 0.297

The probability that a customer who buys a washer also buys a dryer is 0.297 or approximately 30%.

Learn more about probability,

https://brainly.com/question/24756209

#SPJ11

Answer:

I think the answer might be -4 = 3x.

Step-by-step explanation:

-2 times x + 2 = -4 and 5 - 2x = 3x so i think the answer is -4 = 3x. Also, you're welcome if this helps.

the length, in inches, of the other leg of his triangle is 9. 8inches

Using the Pythagorean theorem which states that the square of the longest leg or side of a given triangle is equal to the sum of the squares of the other two sides of the triangle.

From the information given, we have that;

a² + b² = c² represents the relationship between the three sides of a right triangle

Also,

Hypotenuse side = 11 inches

One of the other side = 5 inches

Substitute the values, we have;

11² = 5² + c²

collect like terms

c² = 121 - 25

Subtract the values

c = √96

c = 9. 8 inches

Learn about Pythagorean theorem at: https://brainly.com/question/654982

#SPJ1

a) ∫ (1/x + 3/x^2 - 4/x^3) dx
To solve this indefinite integral, we need to use the power rule and the fact that the derivative of ln(x) is 1/x.

∫ (1/x + 3/x^2 - 4/x^3) dx = ln|x| - 3/x + 2/x^2 + C

b) ∫ (x^2 + 2x - 5) / √x dx
To solve this indefinite integral, we can simplify the integrand by multiplying the numerator and denominator by √x. Then, we can use the power rule and u-substitution.

∫ (x^2 + 2x - 5) / √x dx = ∫ (x^(5/2) + 2x^(3/2) - 5x^(1/2)) dx

= (2/7)x^(7/2) + (4/5)x^(5/2) - (10/3)x^(3/2) + C

c) ∫ x e^x dx
To solve this indefinite integral, we need to use integration by parts.

Let u = x and dv/dx = e^x. Then, we can find v by integrating dv/dx.

v = e^x

Using integration by parts, we get:

∫ x e^x dx = xe^x - ∫ e^x dx

= xe^x - e^x + C

Visit here to learn more about indefinite integral brainly.com/question/29133144

#SPJ11

The inequalities represented are:

In mathematics, an inequality is a statement that two values or expressions are not equal. It is used to compare two values and determine the relationship between them. Inequalities use symbols such as < (less than), > (greater than), ≤ (less than or equal to), and ≥ (greater than or equal to).

Inequalities can be solved and graphed on a number line to show all possible solutions that satisfy the inequality. They are commonly used in algebra and calculus to express a range of values for a variable.

Read more on inequality here:https://brainly.com/question/24372553

#SPJ1

Answer:20 feet by 10 feet

Step-by-step explanation:

Answer:

Based on the given graph, we can see that the bars representing salaries above $175,000 span a total of 7 employee salaries. Since each bar spans a width of $50,000, we can estimate that the total number of employees making at least $175,000 is approximately 7 multiplied by 50,000 divided by 10,000, which equals 35%. Therefore, the owner can justify the claim that on average an employee makes at least $175,000 by stating that approximately 35% of the current employees already make at least that amount. However, it's important to note that this calculation is based on estimates and assumptions and should not be used as a definitive answer.

The initial height of the ball after launch is 14ft.

A vertical motion is a motion due to gravity. This means the velocity and height will depend on the acceleration due to gravity.

The height of vertical motion is given as;

H = ut ± 1/2 gt²

where u is the initial velocity and t is the time to reach max height.

The height of a ball is given by;

h(t) = -16t²+14

where t represents the time in seconds after launch.

The initial height after launch is when t = 0

h(t) = -16(0)² +14

h(t) = 14ft

learn more about vertical motion from

https://brainly.com/question/24230984

#SPJ1

Answer:

[tex]\overline{\sf QR}=28\sqrt{2}[/tex]

Step-by-step explanation:

If ΔPQR is a right triangle, where angles P and R both measure 45°, then the triangle is a special 45-45-90 triangle.

The measure of the sides of a 45-45-90 triangle are in the ratio 1 : 1 : √2.

This means that the length of each leg is equal, and the length of the hypotenuse is equal to the length of a leg multiplied by √2.

The legs of ΔPQR are segments PQ and QR.

The hypotenuse of ΔPQR is segment PR.

Therefore, to find the length of the leg QR, divide the length of the hypotenuse PR by √2.

[tex]\begin{aligned}\implies \overline{\sf QR}&=\dfrac{\overline{\sf PR}}{\sqrt{2}}\\\\&= \dfrac{56}{\sqrt{2}} \\\\&=\dfrac{56}{\sqrt{2}}\cdot \dfrac{\sqrt{2}}{\sqrt{2}}\\\\&=\dfrac{56\sqrt{2}}{2}\\\\&=28\sqrt{2}\end{aligned}[/tex]

Therefore, the length of segment QR is 28√2.

1 is linear variation and 2 is direct proportionality. In 1 it is linear variation since from the beginning the zeros do not correspond and in 2 if the zeros correspond.

Variation refers to the differences that exist among individuals or groups within a population. These differences can be genetic, environmental, or a combination of both, and can manifest in various traits, such as physical characteristics, behavior, or disease susceptibility.

Genetic variation arises from differences in the DNA sequence among individuals, which can result in different traits being expressed. This variation can occur naturally or be induced by mutations, genetic recombination, or genetic drift. Environmental variation arises from differences in the conditions experienced by individuals or groups, such as differences in climate, nutrition, or exposure to toxins. Environmental variation can also interact with genetic variation to produce complex traits.

To learn more about Variation visit here:

brainly.com/question/14254277

#SPJ4

Complete Question:-

Look at the following tables and analyze the values ​​they contain. Then, pose a problem that can be solved with these data, also argue why one table corresponds to linear variation and the other to direct proportional variation.​

TABLE 1:

X 0 1 2 3

and 2 17 32 47

TABLE 2:

X 0 1 2 3

AND 0 15 30 45​

Answer:

bad photo quality

Step-by-step explanation:

The function is transformed by a vertical stretching or compression by a factor of 5, a horizontal shift of 6 units to the right, and a vertical shift of 2 units downward.

The transformation of a function may involve any change.

Usually, these can be shifted horizontally (by transforming inputs) or vertically (by transforming output), stretched (multiplying outputs or inputs), etc.

If the original function is y = f(x), assuming the horizontal axis is the input axis and the vertical is for outputs, then:

Horizontal shift (also called phase shift):

Left shift by c units: y=f(x+c) (same output, but c units earlier)

Right shift by c units: y=f(x-c)(same output, but c units late)

Vertical shift:

Up by d units: y = f(x) + d

Down by d units: y = f(x) - d

Stretching:

Vertical stretch by a factor k: y = k × f(x)

Horizontal stretch by a factor k: y = f(x/k)

Given data ,

Let the function be represented as f ( x )

Now , the value of f ( x ) is

In the given function y = 5/(x - 6) - 2, the values of a, h, and k can be identified as follows:

a = 5

h = 6

k = -2

Now , the original function is y = a/(x - h) + k, and the reciprocal family of this function is y = a/(x - h) + k

And , value of 'a' determines the vertical scaling factor of the reciprocal function

Now , the value of 'h' determines the horizontal shift of the reciprocal function. If 'h' is positive, the graph of the reciprocal function is shifted horizontally to the right

And , if 'k' is negative, the graph is shifted vertically downward

Hence , the transformation of the function is solved

To learn more about transformation of functions click :

https://brainly.com/question/26896273

#SPJ2

The radius of circle A is 4.

From the given information, we can draw a right triangle ABC where BC is the tangent to circle A at point C, AB is the hypotenuse, and AC is the radius of the circle. By the Pythagorean theorem, we have:

AC² + BC² = AB²

Substituting the given values, we get:

AC² + 3² = 5²

AC² = 25 - 9

AC² = 16

Taking the square root of both sides, we get:

AC = 4

Therefore, the length of the radius of circle A is 4.

To know more about radius of circle, refer here:

https://brainly.com/question/31291491#

#SPJ11

The required value of te angle ∠3 = 100 degree.

A circle is a shape that is made up of all of the points in a plane that are at a certain distance from the center. Alternatively, it is the plane-moving curve traced by a point at a constant distance from a given point.

From the figure of the circle, we can identify that AD and CD are two diameter of the circle.

and ∠COA = ∠3 is inscribed angle made by up by 2 radian of the circle

So, arcCA = ∠3 = 100 degree

Thus, required value of te angle ∠3 = 100 degree.

To know more about Circle visit:

brainly.com/question/12711347

#SPJ1

Answer:

324π

Step-by-step explanation:

Area of circle = r² · π

r = 18 in

Find its area in terms of pi.

We Take

18² · π = 324π

So, the area of the circle is 324π.

Answer:

A = 324π

Step-by-step explanation:

A = πr²

A = π(18)²

A = π(324)

A = 324π

Ruben painted a total area of [tex]130.5 square feet.[/tex]

To determine the total area that Ruben painted, we need to find the area

of each wall and then add them together. Since the dimensions of the

walls are given in different units (yards and feet), we will first need to

convert them to a common unit.The first wall is 3 1/2 yards long by 9 feet

tall, which is equivalent to 10 1/2 feet long by 9 feet tall (since 1 yard = 3

feet).

The area of this wall is:

[tex]10 1/2 feet * 9 feet = 94.5 square feet[/tex]

The second two walls are each 4 feet tall by 1 1/2 yards long, which is

equivalent to 4 feet tall by 4.5 feet long (since 1 yard = 3 feet).

The area of each of these walls is:

[tex]4 feet* 4.5 feet = 18 square feet[/tex]

Since Ruben painted one coat on each wall, the total area he painted is:

[tex]94.5 square feet + 2 * 18 square feet = 130.5 square feet[/tex]

To know more about  total area refer here https://brainly.com/question/8419462# #SPJ11

The volume of the cone to the nearest tenth is 263.8 cm^3.

To find the volume of the cone, we first need to use the formula V = (1/3)πr^2h, where r is the radius of the base and h is the height of the cone.

We are given that the radius is 6 centimeters and the height is 7 centimeters, so we can substitute these values into the formula.

The formula for the volume of a cone is V = (1/3)πr^2h, where r is the radius of the base and h is the height of the cone.

Using the given values, we can plug them into the formula and solve:

V = (1/3)π(6 cm)^2(7 cm)

V ≈ 263.7 cm^3

Rounding this to the nearest tenth gives us the final answer of 263.8 cm^3, which is option (C).

Since 3 is less than 5, we round down, which means the answer is 263.8 cm^3, as shown in option (C).

Learn more about volume

brainly.com/question/1578538

#SPJ11

the determinant of the matrix is e1e4-e3e2

The determinant of a matrix is a scalar value that is a function of the entries. It characterizes some properties of the matrix and the linear map represented by it. The determinant is nonzero if and only if the matrix is invertible and an isomorphism exists.

Determinants are only defined for square matrices and encode certain properties of the matrices.

The determinant of a matrix is defined by the difference betweern the product of the right diagonal to the the product of the left diagonal

From the given question. the determinant of the matrix is e1*e4 -e3-e2 = e1e4-e3e2

Learn more about the determinant of the matrix on https://brainly.com/question/4470545

#SPJ1

the partial derivative ∂z/∂y using implicit differentiation of e^z + sin(5x^2) + 2y = 0 is:
To calculate the partial derivative ∂z/∂y using implicit differentiation of e* + sin (5x^2) + 2y = 0, we first need to differentiate both sides of the equation with respect to y.

We get:

d/dy(e^z + sin(5x^2) + 2y) = d/dy(0)

Using the chain rule, the left-hand side becomes:

∂(e^z)/∂z * ∂z/∂y + ∂(sin(5x^2))/∂y + 2

We can simplify this by recognizing that ∂(sin(5x^2))/∂y = 0, since sin(5x^2) does not depend on y. Thus, we are left with:

∂(e^z)/∂z * ∂z/∂y + 2 = 0

Now, we need to solve for ∂z/∂y:

∂z/∂y = -2 / ∂(e^z)/∂z

To find ∂(e^z)/∂z, we differentiate e^z with respect to z, giving:

∂(e^z)/∂z = e^z

Substituting this into the expression for ∂z/∂y, we get:

∂z/∂y = -2 / e^z

Therefore, the partial derivative ∂z/∂y using implicit differentiation of e^z + sin(5x^2) + 2y = 0 is:

∂z/∂y = -2 / e^z

Note that we cannot simplify this any further without knowing the value of z.
To find the partial derivative ∂z/∂y using implicit differentiation for the equation e^z + sin(5x^2) + 2y = 0, we will first differentiate the equation with respect to y, treating z as a function of x and y.

Differentiating both sides with respect to y:

∂/∂y (e^z) + ∂/∂y (sin(5x^2)) + ∂/∂y (2y) = ∂/∂y (0)

Using the chain rule for the first term, we get:

(e^z) * (∂z/∂y) + 0 + 2 = 0

Now, solve for ∂z/∂y:

∂z/∂y = -2 / e^z

So, the partial derivative ∂z/∂y for the given equation is:

∂z/∂y = -2 / e^z

To know more about  partial derivative click here:

#SPJ11

To build a series for the given function f(x) = (e^(2x) - 1 - 2x)/2x^2, we can start by finding the MacLaurin series for e^(2x) and then manipulate it to obtain the desired series.

The MacLaurin series for e^(2x) is given by:

e^(2x) = Σ (2x)^n / n! for n = 0 to ∞

Expanding the series, we get:

e^(2x) = 1 + 2x + 2x^2/2! + 2^3x^3/3! + 2^4x^4/4! + ...

Now, we can substitute this back into the original function:

f(x) = (e^(2x) - 1 - 2x)/2x^2 = (1 + 2x + 2x^2/2! + 2^3x^3/3! + 2^4x^4/4! + ... - 1 - 2x) / 2x^2

Simplifying, we have:

f(x) = (2x^2/2! + 2^3x^3/3! + 2^4x^4/4! + ...) / 2x^2

Now, we can divide by 2x^2 to obtain the series for f(x):

f(x) = 1/2! + 2x/3! + 2^3x^2/4! + 2^4x^3/5! + ...

Finally, we can write the final answer in proper summation notation:

f(x) = Σ (2^(n-1)x^(n-2)) / n! for n = 2 to ∞

To begin, we can write f(x) as:

f(x) = (1/2x^2)[e^(2x) - 1 - 2x]

Next, we will use the Maclaurin series for e^x, which is:

e^x = 1 + x + (x^2)/2! + (x^3)/3! + ...

Substituting 2x for x, we have:

e^(2x) = 1 + 2x + (4x^2)/2! + (8x^3)/3! + ...

Expanding the first two terms of the numerator in f(x), we have:

f(x) = (1/2x^2)[(1 + 2x + (4x^2)/2! + (8x^3)/3! + ...) - 1 - 2x]

Simplifying, we get:

f(x) = (1/2x^2)[2x + (4x^2)/2! + (8x^3)/3! + ...]

Now we can simplify the coefficients in the numerator by factoring out 2x:

f(x) = (1/x)[1 + (2x)/2! + (4x^2)/3! + ...]

Finally, we can write the series in summation notation:

f(x) = Σ[(2n)!/(2^n*n!)]x^n, n=1 to infinity.

To learn more about function visit;

brainly.com/question/12431044

#SPJ11