I disagree since friction will cause the ultimate height to be lower than what was anticipated. To reduce the height, resist the action.
What is the height?
The vertical distance between an object's top and the bottom is defined as its height.
It is measured in centimeters, inches, meters, and other units. The height of the cliff is obtained by the Newton equation of motion.
My actual height was less than what I had anticipated. this is because the puck's movement along the track was impeded by friction.
To the Khalida, I object. Disagree, since friction will cause the ultimate height to be lower than the anticipated height. To reduce the height, resist the action.
Hence, I disagree with Khalida.
To learn more about the height, refer to the link;
https://brainly.com/question/10726356
#SPJ1
One year consists of 365 days. this is closest to how many seconds?
If one year consists of 365 days, this is closest to x = 3.15 × 10⁷ seconds.
What is the number of seconds in a year?
Given that;
Number of days in a year = 365Number of seconds in 365 days = ?Note that; there are 24 hours in a day, 1440 minutes in a day and 86400 seconds in a days.
1 day contains 86400 seconds
365 contains x seconds
x = 365 × 86400
x = 3.15 × 10⁷ seconds
Therefore, if one year consists of 365 days, this is closest to x = 3.15 × 10⁷ seconds.
Learn more about the relationship between seconds and days here: https://brainly.com/question/533345.
#SPJ12
A glider with a mass of 2 kg is moving rightward at 1 m/s. A second glider, with a mass of 3 kg, is also moving rightward, at 5 m/s. After the two gliders collide, the first glider is moving rightward at 2 m/s. What is the velocity of the second glider after the collision
The velocity of the second glider after the collision is 4.33 m/s rightward.
Velocity of the second glider after the collision
Apply the principle of conservation of linear momentum;
m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂
where;
m₁ is mass of first gliderm₂ is mass of second glider u₁ is initial velocity of first glideru₂ is initial velocity of second gliderv is the final velocity of the gliders(2)(1) + (3)(5) = (2)(2) + 3v₂
17 = 4 + 3v₂
3v₂ = 17 - 4
3v₂ = 13
v₂ = 13/3
v₂ = 4.33 m/s
Thus, the velocity of the second glider after the collision is 4.33 m/s rightward.
Learn more about linear momentum here: https://brainly.com/question/7538238
#SPJ1
In one day, a large tree sheds 82 gallons of water through its leaves into the atmosphere. how many cubic meters of water is this?
Answer:
0.372779 cubic meters
Explanation:
Answer:
.3104 m^3
Explanation:
1 gal (US) = .00378541178 m^3
If a liquid has a density of 1.67 g/cm^3, what is the volume of 45g of the liquid?
Answer:
V = 26.95 cm³
Explanation:
Density is given by the formula :
ρ = m÷V
Density = mass ÷ Volume
Given both density and mass we rearrange, substitute and solve for Volume :
Rearranging the equation to make Volume the subject :
ρ = m÷V
ρV = m
V = m÷ ρ
Now substitute :
V = 45 ÷ 1.67
V = 26.9461077844
Take 2 decimal places as the density is 2 decimal places :
V = 26.95
Units will be cm³ as it is volume
Hope this helped and have a good day
why would north america will not be able to view the eclipse
The North America will not be able to view the eclipse because of its location on the earth caused by the tilting of the earth.
Effect of tilting of the EarthThe tilt of the Earth is what causes seasons to occur. These are the seasons in relation to the Northern Hemisphere.
The tilting of the Earth causes the difference in the amount of sun reaching each region of the earth like in the North America continent.
Thus, the North America will not be able to view the eclipse because of its location on the earth caused by the tilting of the earth.
Learn more about eclipse here: https://brainly.com/question/8643
#SPJ1
what is the index of the refraction?
Answer:
The value of index of refraction(n₂) is 1.26
Explanation:
look at the attachment above
Can someone PLEASE explain:
Average velocity = u + v / 2
(How do you find the initial and the final velocity in a situation)
Two liquids A and B of relative densities 0.7 and 0.4 respectively are mixed with water, kl. How will the mixture. arrangement occur in a given container?
The liquid A is present lower in the container as compared to liquid B due to more weight.
How will the mixture. arrangement occur in a given container?If two liquids A and B of relative densities 0.7 and 0.4 respectively then the lower density liquid remain at the top and higher density solution which is liquid A remains lower in the container because higher density solution has more weight.
So we can conclude that the liquid A is present lower in the container as compared to liquid B due to more weight.
Learn more about density here: https://brainly.com/question/1354972
#SPJ1
Two friends leave a movie theater and take different busses to the same ice cream shop. one bus takes a longer route driving on a high-speed highway, while the other takes a shorter route on lower-speed local roads. which friend has the greater displacement?
The friend who has the greater displacement is the one who takes the longest path.
What is displacement?The displacement is the shortest distance travelled by the particle. It is the vector quantity which re[presents both the magnitude and direction.
Given, two friends leave a movie theater and take different buses to the same ice cream shop. One bus takes a longer route driving on a high-speed highway, while the other takes a shorter route on lower-speed local roads.
According to the definition. the displacement is neither larger not shorter but it is the shortest distance traveled by the person or particle.
Thus, friend who has longer path has larger displacement.
Learn more about displacement.
https://brainly.com/question/11934397
#SPJ1
5. On a hot summer day the grass feels cooler than the sidewalk, because
O
O
the grass has a higher specific heat
the grass has a smaller surface area
the sidewalk is at a higher temperature
Answer:
because the side walk is at high temperature
How many degrees is the maximum and minimum variation between the true and magnetic poles?
The maximum and minimum variation between the true and magnetic poles is 180 degrees and 0 degrees respectively.
What are the true and magnetic poles?The poles of the earth are the North and South poles.
The North is taken as the reference point.
The true north is a fixed point on the globe and gives the true North and South poles.
The Magnetic north is the direction that a compass needle points to as it aligns with the Earth's magnetic field and gives the magnetic North and South poles.
The maximum maximum and minimum variation between the true and magnetic poles is 180 degrees and 0 degrees respectively.
Learn more about true and magnetic poles at: https://brainly.com/question/26592351
#SPJ12
If a BASEBALL is traveling in projectile motion, in what direction is it going?
The direction the BASEBALL which is traveling in projectile motion is going is called a parabola.
What is projectile motion?Projectile motion is the motion of an object launched into the air at an angle to the horizontal and allowed to fall freely under the effect of gravity.
The object is known as a projectile, and the path of motion is a curved path called a parabola.
Therefore, the direction the BASEBALL which is traveling in projectile motion is going is called a parabola.
Learn more about projectile motion at: https://brainly.com/question/24216590
#SPJ12
a 5200w electric oven
Answer:
104 kWh
Explanation:
To calculate the kWh you multiply power with the amount of hours.
So for this we take 5200 W × 20 = 104 000 Wh
Then change Wh to kWh so that makes 104 kWh
. An object is dropped from a height of 75.0 m above ground level. (a)
Determine the distance traveled during the first second. (b) Determine
the final velocity at which the object hits the ground. (c) Determine the
distance traveled during the last second of motion before hitting the
ground.
a) 4.9 m
b) 38.3 m/s
c) 33.4 m
What are three equation of motion?The three equations are,
v = u + at
v² = u² + 2as
s = ut + ½at²
According to the question,
Let hold the y-axis in the direction of gravity.
Initial velocity 0 = 0 /,
Initial height ℎ0 = 0 , and finish height ℎ = 75.0
gravitational acceleration = 9.8 /²
a) Determine the distance traveled during the first second.
By third equation of motion
[tex]S_{0} = v_{0} t +\frac{1}{2} gt^{2}[/tex] where [tex]v_{0}[/tex] =0
then [tex]S_{0} = \frac{gt^{2}}{2} = \frac{9.8*1^{2} }{2} = 4.9 m[/tex]
b) Determine the final velocity at which the object hits the ground
let – velocity of object, when it falling to the ground
– moment falling to the ground, and obtain from condition:
ℎ = ℎ() = 75.0
[tex]v_{f} = v_{0} +gt = gt[/tex]
[tex]h (t_{f} ) = \frac{gt^{2} }{2} = 75.0 m\\t_{f} =\sqrt{\frac{2h_{f} }{g} } \\v_{f}= gt = g \sqrt{\frac{2h_{f} }{g} } =\sqrt{2hg_{f} }= =\sqrt{2*9.8*75.0} = 38.3 m/s[/tex]
c) Determine the distance traveled during the last second of motion before hitting the ground.
From the above equation we get,
[tex]\sqrt{2*75*9.8*1} - \frac{9.8*1^{2} }{2} = 38.3 -4.9 = 33.4 m[/tex]
Therefore,
a) 4.9 m is the distance traveled during the first second.
b) 38.3 m/s is the final velocity at which the object hits the ground
c) 33.4 is the distance traveled during the last second of motion before hitting the ground.
Learn more about equations of motion here: https://brainly.com/question/14355103
#SPJ1
matter falling into a black hole arranges itself in the shape of a ____.
Matter falling into a black hole arranges itself in the shape of a disk that is thick at the outer edge, thin along the inner ring.
What is black hole?A black hole is a region of space time where gravity is so strong that nothing or no particles or even electromagnetic radiation such as light can escape from it.
Thus, matter falling into a black hole arranges itself in the shape of a disk that is thick at the outer edge, thin along the inner ring.
Learn more about black hole here: https://brainly.com/question/10597324
#SPJ11
Explain how the scenario below illustrates a lack of understanding of the importance of quality control.
Situation: Tomas is the manager of a local restaurant.
Tomas: “The health inspection department is too strict. We have to leave some cold foods out to prepare salads for lunch.”
Answer:
He is being careless.
Explanation:
he is trying to "get rid" of one problem so he can tackle another. This is food though, and you have customers to serve. You also have to be careful about food poisoning.
Prakash kicks a ball of mass 500 g which moves with a velocity of 10 m/s. Passang kicks the same ball and it moves with a velocity of 20 m/s. Compare the kinetic energy acquired by the ball in the two cases. TL Thou Prakash kicks a ball of mass 500 g which moves with a velocity of 10 m / s . Passang kicks the same ball and it moves with a velocity of 20 m / s . Compare the kinetic energy acquired by the ball in the two cases . TL Thou
Answer:
750
Explanation:
The kinetic formula is 1 over 2 *mass * velocity Square
Electric Resistance measured in?
Answer:
ohms
Explanation:
because it deal with circuit
Electric resistance is measured in Ohms.
What is an Electric resistance?A electric resistance can be defined as the opposition to current flow in a conductor.
From ohms law, an electric resistance can be determined using the formula below.
Formula:
V = IR.............. Equation 1Where:
V = VoltageI = CurrentR = Electric resistanceAlso,
V is measured in VoltsI is measured in AmpereR is measured in Ohms.Hence, Electric resistance is measured in Ohms.
Learn more about Electric resistance here: https://brainly.com/question/24136694
#SPJ12
Work is always done when
an object moves
an object has potential energy
a force moves an object
a force is applied perpendicular to the direction of the object's motion
Banked Curves: A 600-kg car is going around a banked curve with a radius of 110 m at a steady speed of 24.5 m/s. What is the appropriate banking angle so that the car stays on its path without the assistance of friction
The angle of baking from the calculation is obtained as 30°.
What is banking?The term banking refers to a means of preventing vehicles from skidding off the road at curves.
We know that the banking angle is obtained from;
θ = tan-1(v^2/rg)
v = 24.5 m/s
r = 110 m
g = 9.8 m/s^2
θ = tan-1(25^2/9.8 * 110)
θ = tan-1(625 /1078)
θ = 30°
Learn more about the banking angle:https://brainly.com/question/26759099?r
#SPJ1
state advantages of ultrasonic sound in determining the depth of the ocean
Answer:
It has greater accuracy than other nondestructive methods in determining the depth of internal flaws and the thickness of parts with parallel surfaces.
Explanation:
Hope this helps you!
which is a barrier to the correct interpretation of what you hear?
The a barrier to the correct interpretation of what you hear can occur due to different frame of reference.
What is frame of reference?A frame of reference is a particular set of beliefs or ideas on which you base your judgment of things.
A barrier in the correct interpretation of information can occur when two observers are in different frames of reference.
Thus, the a barrier to the correct interpretation of what you hear can occur due to different frame of reference.
The complete question is below:
Which is a barrier to the correct interpretation of what you hear?
-Different frame of reference
-Dissimilar vocabulary
-Differing accent
-Jargon usage
-Poor explanation
Learn more about frame of reference here: https://brainly.com/question/1707361
#SPJ11
A 45. 5-g super ball traveling at 27. 5 m/s bounces off a brick wall and rebounds at 21. 0 m/s. A high-speed camera records this event. If the ball is in contact with the wall for 3. 30 ms, what is the magnitude of the average acceleration of the ball during this time interval?.
The magnitude of the average acceleration of the ball during this time interval will be 1969.69 m/s².
What is acceleration?The rate of velocity change concerning time is known as acceleration.
Given data;
Initial velocity, u= 27.5 m/s
Rebound velocity, v= 21.0 m/s
Time elapsed, t = 3.30 × 10⁻³ seconds.
To find ;
Average acceleration, a
The average acceleration when the change in velocity is observed by the formula as:
[tex]\rm a_{avg}= \frac{v-u}{t}[/tex]
Substitute the given values:
[tex]\rm a_{avg}= \frac{27.5-21.0}{3.30 \times 10^{-3}} \\\\ a_{avg}= 1969.69 \ m/s^2[/tex]
Hence, the magnitude of the average acceleration of the ball during this time interval will be 1969.69 m/s².
To learn more about acceleration, refer to the link https://brainly.com/question/2437624#SPJ1.
#SPJ1
durning which type of process does pressure remain consistent
A.Isothermal
B.isolated
C.Adiabatic
D.Isobaric
Answer:
[tex]\fbox {D. Isobaric}[/tex]
Explanation:
The process during which pressure remains constant is called an isobaric process.
Could you sky-dive on the Moon? Why or why not?
Answer:
no
Explanation:
the moon's force of gravity is not strong enough to pull you down compared to earth, so you will just float
Q1.
(a) Some students have designed and built an electric-powered go-kart. After testing, the
students decided to make changes to the design of their go-kart.
First design X
Final design Y
The go-kart always had the same mass and used the same motor.
The change in shape from the first design (X) to the final design (Y) will affect the top
speed of the go-kart.
Explain why.
Answer:Because if the shape gets changed it will move faster without to much weight
Explanation:
Which processes occur during the second stage of technological design? Check all that apply.
designing a solution
studying relevant information
rebuilding and retesting
reporting a solution
defining criteria of success
identifying a problem
building a prototype
Answer:
designing a solution
Explanation:
after knowing & identifying a problem we start putting a solution
HELP PLEASE!!! In the diagram, q1 = -6.39*10^-9 C and q2 = +3.22*10^-9 C. What is the electric field at point P? Include a + or - sign to indicate the direction. 91 92 P 0.150 m ** 0.250 m (Hint: The distance from q1 to P is NOT 0.150 m.) (Remember, E points away from + charges, and toward charges.) (Unit = N/C) HELP PLEASE!!
Answer:
E = K Q / R^2
E1 = K Q1 / R1^2 = K * (-6.39 E-9) / .4^2 = -K 39.9 E-9
E2 = K Q2 / R2^2 = K * 3.22 E-9 / .25^2 = K 51.5 E-9
Field will point to right of P since E2 (positive) stronger
E = K (E2 - E1) = 9.0 E9 * (51.5 - 39.9) E-9 = 104 N/C
The electric field at point P is 104.6 N/C.
What is meant by electric field ?Every place in space where a charge exists in any form has an electric attribute that can be defined as the electric field.
Here,
q₁ = -6.39 x 10⁻⁹C
q₂ = 3.22 x 10⁻⁹C
Distance from q₁ to P, d₁ = 0.4 m
Distance from q₂ to P, d₂ = 0.25 m
Electric field at P due to q₁, E₁ = k x -6.39 x 10⁻⁹/(0.4)²
E₁ = -39.9 x 10⁻⁹k N/C
Electric field at P due to q₂, E₂ = k x 3.22 x 10⁻⁹/(0.25)²
E₂ =51.52 x 10⁻⁹k N/C
Therefore, total electric field at P,
E = E₂ - E₁
E = (51.52 - 39.9) x 10⁻⁹k
E = 104.6 N/C
Hence,
The electric field at point P is 104.6 N/C.
To learn more about electric field, click:
https://brainly.com/question/8971780
#SPJ5
Why is CH4 not a suitable proxy for the surface pressure?
Explanation:
Methane (CH4) is 30 times stronger than carbon dioxide as an absorber of infrared radiation.
Answer:
The main reasons why CH4 has a higher vapor pressure at a given temperature when compared to CH3Cl is that CH4.
And Is 30 Times Stronger than Carbon dioxide...
Explanation:
Hope It Helps!!!
Explain an example of an object moving in projectile motion.
An example of an object moving in projectile motion is; A basketball being thrown into a net.
What is an example of a Projectile Motion?Projectile motion is the motion of an object thrown or projected into the air, subject to only the acceleration of gravity.
Now, an example of an object moving in a projectile motion is throwing a basketball into a basketball net in a game. This is because the ball is thrown into the air at an angle towards the net and as such is subject to only acceleration of gravity.
Read more about Projectile Motion at; https://brainly.com/question/24216590
#SPJ12