Answer:
Jefferson Company1. An example of a direct cost is the cost of direct raw materials. An example of an overhead cost is cost of factory repairs and maintenance.
2. The overhead allocated to Job A21 as of February 1 is $40,000.
3. The overhead allocated to Job A24 as of February 28 is $32.000.
4. The under-allocated overhead for February is $6,000
5. The ending balance of jobs still in process as of February 28 is $92,000.
6. The Cost of Jobs Billed for February is $394,000.
Explanation:
a) Data and Calculations:
Budgeted overhead allocation rate = 80% of direct labor costs
Beginning WIP:
Materials $30,000
Direct labor 50,000
Overhead 40,000 ($50,000 * 80%)
Overhead allocated to Job A21 as of February 1 = $40,000 ($50,000 * 80%)
Overhead allocated to Job A24 as of February 28 = $32,000 ($40,000 * 80%)
Total overhead allocated for February = $96,000 ($120,000 * 80%)
Actual overhead costs incurred = $102,000
Therefore, the under-allocated overhead for February = $6,000
The ending balance of jobs still in process as of February 28 (Job A24) =
Materials costs = $20,000
Labor costs = $40,000
Overhead applied = $32,000
Total costs = $92,000
Cost of Jobs Billed:
Beginning WIP: Cost of Job A21 = $120,000 ($30,000 + 50,000 + 40,000)
Costs incurred during the period:
Cost of Direct Materials 150,000
Cost of Direct Labor 120,000
Allocated overhead costs 96,000
Total costs of production = $486,000
Less Ending WIP (Job A24) = 92,000
Cost of Jobs Billed for February $394,000
Parmesan Company uses the direct method for its statement of cash flow. It reports the following information regarding the year 2014: From the income statement: Sales Revenues, $265,000 Cost of Goods Sold, $210,000 Operating expenses, $31,000 From the balance sheet: Beginning BalanceEnding Balance Accounts Receivable:$14,500$17,800 Inventory:23,50017,800 Accounts Payable:6,00013,500 Accrued Liabilities:4,0001,500 On the statement of cash flows, what amount will be shown for payments to suppliers for inventory purchases
Answer: $196,800
Explanation:
The cash payments to suppliers for inventory purchases will be:
= Cost of goods sold - Decrease in inventory - Increase in accounts payable
Decrease in inventory = 23,500 - 17,800
= $5,700
Increase in accounts payable
= 13,500 - 6,000
= $7,500
Cash to suppliers for inventory = 210,000 - 5,700 - 7,500
= $196,800
Melissa Shallowford contributed a patent, accounts receivable, and $22,340 cash to a partnership. The patent had a book value of $8,650. However, the technology covered by the patent appeared to have significant market potential. Thus, the patent was appraised at $92,840. The accounts receivable control account was $34,300, with an allowance for doubtful accounts of $2,200. The partnership also assumed a $9,010 account payable owed to a Shallowford supplier.
Required:
On December 31, provide the journal entry for Shallowford's contribution to the partnership Rotor to the chart of accounts for the exact wordino of the account titles ONOW journals do not use ines for journal explanations. Every Ave on a journal page is used for debitor credil entries CNOW journals wol automatically indont a credit entry when a credit amount is entered.
Answer:
Date General Journal Debit Credit
Dec. 31 Cash $22,340
Patent $92,840
Accounts receivable $34,300
Allowance for doubtful accounts $2,200
Accounts payable $9,010
Holly Shallowford's , Capital $138,270
(To record capital brought in by Shallowford's)
hello, im stuck. if i could get some ideas for this i will mark you brainliest if i can.
i just need some ideas and maybe an explanation. i don't expect an entire two page thing but just some help pls :((
thanks in advance.
Answer: so you are giving someone instructions like how to make a sandwich with a lot of detail so someone could do everything you did :)
Explanation:
✪ ω ✪
The ultimate goal of operations management is to provide high-quality goods and services instantaneously in response to customer demand.
a. True
b. False
Answer:
a. True
Explanation:
The ultimate goal of operations management is to provide, in a timely and successful manner, goods and/or services to the final customer.
In this sense, operation management is customer-focused, and for this reason, its main task is to ensure the successful production and/or delivery of a good or service, from the moment the inputs enter the firm, to the moment the output exits the firm and reaches the final customer.
When Mary Potts arrived at her store on the morning of January 29, she found empty shelves and display racks; thieves had broken in during the night and stolen the entire inventory. Accounting records showed that Potts had inventory costing $50,000 on January 1. From January 1 to January 28, Potts had made net sales of $70,000 and net purchases of $80,000. The gross profit during the past several years had consistently averaged 42 percent of net sales. Potts plans to file an insurance claim for the theft loss.
Required:
a. Using the gross profit method, estimate the cost of inventory at the time of the theft.
b. Doe Potts use the periodic inventory method or does she account for inventory using the perpetual method?
Answer:
a. The cost of inventory at the time of the theft is $89,400.
b. Potts uses the periodic inventory method.
Explanation:
a. Using the gross profit method, estimate the cost of inventory at the time of the theft.
The cost of inventory at the time of the theft can be estimated using gross profit method as follows:
Inventory cost on January 1 = $50,000
Net sales = $70,000
Net purchases = $80,000
Gross profit = Net sales * 42% = $70,000 * 42% = $29,400
Cost of goods sold = Net sales - Gross profit = $70,000 - $29,400 = $40,600
Inventory cost on January 28 = Inventory cost on January 1 + Net purchases - Cost of goods sold = $50,000 + $80,000 - $40,600 = $89,400
Inventory cost on January 28 is the same as the cost of inventory at the time of the theft; therefore, the cost of inventory at the time of the theft is $89,400.
b. Doe Potts use the periodic inventory method or does she account for inventory using the perpetual method?
Periodic inventory method refers to an accounting stock valuation practice in which updates to inventory are made at specified intervals such as weekly, monthly, or annually.
Perpetual inventory method refers to an accounting stock valuation practice in which updates to inventory are made continuously and automatically as inventory is received or sold.
From the question, the fact that the only available accounting records showed that Potts had inventory costing $50,000 on January 1 without any other record January 28, this implies that Potts uses the periodic inventory method which could be monthly or annually.
a. Based on the gross profit method, the estimated cost of inventory at the time of the theft in Mary Potts' store is $89,400.
b. Mary Potts uses the periodic inventory method, which records inventory movements at the end of the period. The perpetual inventory method records inventory movements as each transaction occurs.
Data and Calculations:
Beginning inventory on January 1 = $50,000
Net Purchases in January = $80,000
Goods available for sale = $130,000 ($50,000 + $80,000)
Net Sales = $70,000
Gross profit margin = 42%
Gross profit = $29,400 ($70,000 x 42%)
Cost of goods sold = Net Sales - Gross profit
= $40,600 ($70,000 - $29,400)
Ending inventory on January 28 = Goods available for sale - Cost of goods sold
= $89,400 ($130,000 - $40,600)
Learn more: https://brainly.com/question/15730346
Whether to pay a lawmaker for giving a speech at your company is an ethical
dilemma that deals with
O A. lobbying
B. awarding honoraria
c. professional standards
D. gift giving
Answer: B
Explanation:
Wayne is working at the overseas branch of his organization. He needs some clarification about a project. He approaches a senior manager thinking he would get a good explanation. However, he is instructed to follow protocol and sent away. Also, he is informed that only team leads are allowed to approach senior managers. This implies that the organization has a ______ score.
A) high Individualism/Collective Index
B) high Power Distance Index
C) low Individualism/Collective Index
D) low Power Distance Index
E) high Uncertainty Avoidance Index
Answer:
B)High Power Distance Index
Explanation:
From the question, we are informed about Wayne who is working at the overseas branch of his organization. He needs some clarification about a project. He approaches a senior manager thinking he would get a good explanation. However, he is instructed to follow protocol and sent away. Also, he is informed that only team leads are allowed to approach senior managers. In this case, the organization has a High Power Distance Index score. The power-distance index can be regarded as way to measure acceptance of hierarchy of wealth/power by some people in a nation, business as well as culture. power-distance index helps to know how well citizen can accept authority or challenge authority of those in power.
Bond Yields are:_________
a. quoted as the average monthly rate of return and assume the bond is purchased today at the quoted price and held for twelve months.
b. quoted as annual rates of return and assume the bond is purchased today at the stated price and sold one year from today.
c. stated as a percentage of the maturity value and assume the bond is held to maturity.
d. stated as an annual rate of return and assume the bond is purchased today and held until maturity
Answer:
d. stated as an annual rate of return and assume the bond is purchased today and held until maturity
Explanation:
Bonds are financial debt instruments that are sold to investors in exchange for the interest or yeild they will generate over time.
Yield to maturity is the total yield that a bond will have from point of sale till maturity.
The yield is stated as an annual rate of return. For example 7% per year.
Usually the longer the maturity period of bonds the higher the yield of the bond
Match each type of adjusting entry with its definition.
Deferred revenue
Accrued expenses
Prepaid expenses
Accrued revenue
Match each of the options above to the items below.
Receive cash in the current period that will be recorded as a revenue in a future period.
Record an expense in the current period that will be paid in cash in a future period.
Record a revenue in the current period that will be collected in cash in a future period.
Pay cash (or have an obligation to pay cash) in the current period that will be recorded as an expense in a future period.
Answer and Explanation:
The matching is as follows:
1. Deferred revenue - the cash would be received in the present period and the same would be reported as a revenue for the future period
2. Accrued expense - It would be recorded as an expense for a present period but the cash would be paid in the future
3. Prepaid expense - The cash is paid or the obligation is to the pay the cash in the present period but the expense would be recorded in the future period
4. Accrued revenue - the revenue is recorded in the present period but the cash would be collected in a future period
Ryan Corporation manufactures auto steering systems. Cost estimates for one unit of the product for the year follow:
Direct materials $200
Direct labor ($12/hour) $300
Machine hours 20
This product requires 15 hours of direct labor in Department A and 10 hours in Department B. Also, it requires 5 machine hours in Department A and 15 machine hours in Department B.
The factory overhead costs estimated in these two departments follow:
Variable cost Fixed cost
A $ 150,000 94,000
B $ 80,000 163,000
Management expects the firm to produce 1,000 units during the year.
Required
1. Assume that factory overhead was applied on the basis of direct labor hours. Compute the predetermined plantwide factory overhead rate.
2. If factory overhead were applied on the basis of machine hours, what would be the plantwide overhead rate?
3. If the company produced 1,000 units during the year, what was the total amount of applied factory over-head in each department in requirements 1 and 2?
4. If you were asked to evaluate the performance of each department manager, which allocation basis (cost driver) would you use? Why?
5. Compute the departmental overhead rate and amount of applied overhead for Department A using direct labor hours as the allocation base and for Department B using machine hours as the allocation base.
1) The predetermined plantwide factory overhead rate based on direct labor hours is $10.28.
2) The predetermined plantwide factory overhead rate based on machine hours = $12.85 ($257,000/20,000)
3) The total applied factory overhead:Department A Department B Total
Requirement 1 $154,200 $102,800 $257,000
Requirement 2 64,250 192,750 257,000
4. The allocation basis for Department A should be direct labor hours. The department is more labor-intensive. The allocation basis for Department B should be machine hours as it is more machine-intensive.
5) The computation of the departmental overhead rate and amount of applied overhead for Department A using direct labor hours as the allocation base and for Department B using machine hours as the allocation base is as follows:
Department A Department B
Direct labor hours 15,000
Machine hours 15,000
Fixed factory overheads $94,000 $163,000
Departmental overhead rate $6.27 $10.87 ($163,000/15,000)
Applied Overhead $154,200 $192,750
($10.28 x 15,000) ($12.85 x 15,000)
Data and Calculations:Cost of One Unit:
Direct materials $200
Direct labor ($12/hour) $300
Direct labor hour per unit = 25 hours ($300/$12)
Total direct labor hours = 25,000 (25 x 1,000)
Total machine hours = 20,000 (20 x 1,000)
Department A Department B Total
Direct labor hours 15 10 25
Machine hours 5 15 20
Variable factory overheads $150,000 $80,000 $230,000
Fixed factory overheads 94,000 163,000 257,000
Total annual production units = 1,000 units
1) Predetermined plantwide factory overhead rate based on direct labor hours = $10.28 ($257,000/25,000)
2) Predetermined plantwide factory overhead rate based on machine hours = $12.85 ($257,000/20,000)
3) Total applied factory overhead:Department A Department B Total
Direct labor hours $154,200 $102,800 $257,000
Machine hours 64,250 192,750 257,000
5) Departmental Overhead Rate and Applied Overhead:
Department A Department B
Direct labor hours 15,000
Machine hours 15,000
Fixed factory overheads $94,000 $163,000
Departmental overhead rate $6.27 $10.87 ($163,000/15,000)
Applied Overhead $154,200 $192,750
($10.28 x 15,000) ($12.85 x 15,000)
Learn more about predetermined overhead rates at https://brainly.com/question/26372929
#SPJ1
In April, a firm had an ending cash balance of $35,000. In May, the firm had total cash receipts of $40,000 and total cash disbursements of $50,000. The minimum cash balance required by the firm is $25,000. At the end of May, the firm had
Answer:
60,000
Explanation:
What are the benefits of outsourcing
The following trial balance was prepared from the ledger accounts of Ricardo Company: RICARDO COMPANY Trial Balance April 30, Year 2 Account Titles Debit Credit Cash $ 71,900 Accounts receivable 36,000 Supplies 2,400 Prepaid insurance 4,200 Land $ 11,000 Accounts payable 10,200 Common stock 100,000 Retained earnings 29,640 Dividends 8,600 Service revenue 70,000 Rent expense 10,200 Salaries expense 32,700 Operating expense 33,600 Totals $ 199,600 $ 220,840 When the trial balance failed to balance, the accountant reviewed the records and discovered the following errors: The company received $590 as payment for services rendered. The credit to Service Revenue was recorded correctly, but the debit to Cash was recorded as $770. A $1,200 receipt of cash that was received from a customer on accounts receivable was not recorded. A $580 purchase of supplies on account was properly recorded as a debit to the Supplies account. However, the credit to Accounts Payable was not recorded. Land valued at $11,000 was contributed to the business in exchange for common stock. The entry to record the transaction was recorded as a $11,000 credit to both the Land account and the Common Stock account. A $800 rent payment was properly recorded as a credit to Cash. However, the Salaries Expense account was incorrectly debited for $800.
Question Completion:
Prepare the corrected Trial Balance of Ricardo Company.
Answer:
RICARDO COMPANY
The corrected Trial Balance April 30, Year 2
Account Titles Debit Credit
Cash $ 72,920
Accounts receivable 34,800
Supplies 2,400
Prepaid insurance 4,200
Land 11,000
Accounts payable $10,780
Common stock 100,000
Retained earnings 29,640
Dividends 8,600
Service revenue 70,000
Rent expense 11,000
Salaries expense 31,900
Operating expense 33,600
Totals $ 210,420 $ 210,420
Explanation:
a) Data and Calculations:
RICARDO COMPANY
Trial Balance April 30, Year 2
Account Titles Debit Credit
Cash $ 71,900
Accounts receivable 36,000
Supplies 2,400
Prepaid insurance 4,200
Land $11,000
Accounts payable 10,200
Common stock 100,000
Retained earnings 29,640
Dividends 8,600
Service revenue 70,000
Rent expense 10,200
Salaries expense 32,700
Operating expense 33,600
Totals $ 199,600 $ 220,840
Cash Account:
Account Titles Debit Credit
Balance $ 71,900
Overstated service revenue 180
Accounts receivable 1,200
Balance $72,920
Totals $73,100 $73,100
Balance $72,920
Accounts Receivable
Account Titles Debit Credit
Balance $36,000
Cash $1,200
Balance $34,800
Totals $36,000 $36,000
Balance $34,800
Accounts Payable
Account Titles Debit Credit
Balance $10,200
Supplies 580
Balance $10,780
Totals $10,780 $10,780
Balance $10,780
Land
Account Titles Debit Credit
Balance $11,000
Correction of error $22,000
Balance $11,000
Totals $22,000 $22,000
Balance $11,000
Salaries Expense
Account Titles Debit Credit
Balance $32,700
Rent Expense $800
Balance $31,900
Totals $32,700 $32,700
Balance $31,900
Rent Expense
Account Titles Debit Credit
Balance $10,200
Salaries Expense 800
Balance $11,000
Totals $11,000 $11,000
Balance $11,000
Yale Corporation issued to Zap Corporation $70,000, 10% (cash interest payable semiannually on June 30 and December 31) 10-year bonds dated and sold on January 1, 2020. Assume that the company uses the effective interest method for amortization. If the bonds were sold at 97, yielding 10.5%. What is true for journal entries to be made at June 30, 2020, for interest payment if Effective interest method is used?
Answer:
Journal Entry
June 30, 2020
Dr. Interest expense __$3,564.75
Cr. Discount on bonds_$64.75
Cr. Cash ___________$3,500
[To record interest]
Explanation:
First, we need to calculate the issuance price of the bond
Issuance price of the bond = Face value x Seling rate = $70,000 x 97/100 = $67,900
Now we need to calculate the discount value as follow
Discount = Face value - Isuance vaue = $70,000 - $67,900 = $2,100
Now, need to calculate the discount amortization as follow
Discount amortization = ( Carrying value of bond x Effective interest rate x 6/12 ) - ( Face value x Coupon rate x 6/12 ) = ( $67,900 x 10.5%x 6/12 ) - ( $70,000 x 10% x 6/12 = $3,564.75 - $3,500 = $64.75
Now calculate the interest payment
Interst payment = Face value x Coupon rate x 6/12 = $70,000 x 10% x 6/12 = $3,500
The bonds would expire on the date of maturity, and the issuing company will pay the debt holder the face value of the bond.
The issue price is termed as the price at which the issuer of the bond sells the bonds for the first time.
The Journal entry has been attached below.
The calculation of the issuance price of the bond:
Issuance price of the bond = [tex]\text{Face value} \times \text{Seling rate} = \$70,000 \times \frac{97}{100}[/tex] = $67,900
Calculation of the discount value:
Discount = Face value - Isuance vaue = $70,000 - $67,900 = $2,100
Calculation of the discount amortization:
Discount amortization = [tex]( \text{Carrying value of bond} \times \text{Effective interest rate} \itimes \frac{6}{12} ) - ( \text{Face value} \times \text{Coupon rate} \times \frac{6}{12})[/tex]
= [tex]( \$67,900 \times 10.5\%\times \frac{6}{12}) - ( \$70,000 \times 10\% \times \frac{6}{12})[/tex]
= $3,564.75 - $3,500 = $64.75
Calculation of the interest payment:
Interst payment =[tex]\text{ Face value} \times \text{Coupon rate} \times \frac{6}{12} = \$70,000 \times 10\% \times \frac{6}{12}[/tex]= $3,500
To know more about the calculation of the interest payment, refer to the link below:
https://brainly.com/question/9256832
Hakara Company has been using direct labor costs as the basis for assigning overhead to its many products. Under this allocation system, product A has been assigned overhead of $10.80 per unit, while product B has been assigned $3.60 per unit. Management feels that an ABC system will provide a more accurate allocation of the overhead costs and has collected the following cost pool and cost driver information:
Cost Pools Activity Costs Cost Drivers Driver Consumption
Machine setup $360,000 Setup hours 4,000
Materials handling 100,000 Pounds of materials 20,000
Electric power 40,000 Kilowatt-hours 40,000
The following cost information pertains to the production of A and B, just two of Hakara's many products:
A B
Number of units produced 4,000 20,000
Direct materials cost $42,000 $54,000
Direct labor cost $24,000 $40,000
Number of setup hours 400 200
Pounds of materials used 1,000 3,000
Kilowatt-hours 2,000 4,000
Required:
Use activity-based costing to determine a unit cost for each product.
Answer:
Results are below.
Explanation:
First, we need to calculate the activities rates of allocation:
Predetermined manufacturing overhead rate= total estimated overhead costs for the period/ total amount of allocation base
Machine setup= 360,000/4,000= $90 per set up hour
Materials handling= 100,000/20,000= $5 per pound of material
Electric power= 40,000/40,000= $1 per kilowwat hour
Now, we can allocate costs to each product:
Allocated MOH= Estimated manufacturing overhead rate* Actual amount of allocation base
A:
Allocated MOH= 90*400 + 5*1,000 + 1*2,000
Allocated MOH= $43,000
B:
Allocated MOH= 90*200 + 5*3,000 + 1*4,000
Allocated MOH= $37,000
Finally, the total and unitary cost:
A:
Total cost= 42,000 + 24,000 + 43,000
Total cost= $109,000
Unitary cost= 109,000/4,000
Unitary cost= $2.73
B:
Total cost= 54,000 + 40,000 + 37,000
Total cost= $131,000
Unitary cost= 131,000/20,000
Unitary cost= $6.55
The Activity-based costing (ABC) costing system is based on activities, overseen by any event, task unit, or targeted activity
What do you mean by Acitivity based costing?
Activity-based costing (ABC) is a way of providing assigning overhead and indirect costs such as salaries and services — to products and services.
Predetermined manufacturing overhead rate is equal to total estimated overhead costs for the period/ total amount of allocation base
[tex]\rm\,Machine \;setup= \dfrac{360,000}{4,000}= \$90 \; per \;set \;up \;hour\\\\Materials \;handling= \dfrac{100,000}{20,000}= \$5 \;per \;pound \;of \;material\\\\Electric \; power= \dfrac{40,000}{40,000}= \$1 \;per \; kilowatt \;hour[/tex]
We can allocate costs to each product:
Allocated manufacturing overhead is equal to Estimated manufacturing overhead rate multiplied by Actual amount of allocation base.
[tex]\rm\,A: Allocated MOH= 90 \times 400 + 5\times 1,000 + 1\times2,000\\\\Allocated MOH= \$43,000\\\\B: Allocated MOH= 90 \times200 + 5\times3,000 + 1\times4,000\\\\Allocated MOH= \$37,000[/tex]
The total and unitary cost:
[tex]\rm\, A. Total\; cost = 42,000 + 24,000 + 43,000\\\\Total \;cost= \$109,000\\\\Unitary \;cost= \dfrac{109,000}{4,000}\\\\Unitary \;cost= \$2.73\\\\B: Total \;cost= 54,000 + 40,000 + 37,000\\\\Total\; cost= \$131,000\\\\Unitary\; cost= \dfrac{131,000}{20,000}\\\\Unitary\; cost= \$6.55\\\\[/tex]
Thus, Activity based costing (ABC) is used to determine a unit cost for each product A and B.
To learn more about Activity based costing (ABC), refer:
https://brainly.com/question/6654166
2
Highlight four ways in which commercial banks differ from non-bank Financial institutions.
(4mks)
Commercial bank from non bank financial institution
Answer:
Commercial banks give short-term loans while non-bank financial institutions offer medium and long-term loans. -commercial banks offer current account while non-bank institutions do not. -commercial banks offer all types of accounts while non-bank financial institutions offer only savings and fixed deposit accounts.
Hope it helped!!!
Bassett Corporation has two production departments, Milling and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Milling Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates:
Machining Customizing
Machine-hours 17,000 15,000
Direct labor-hours 3,000 6,000
Total fixed manufacturing overhead cost $102,000 $61,200
Variable manufacturing overhead per machine-hour $1.70
Variable manufacturing overhead per direct labor-hour $4.10
During the current month the company started and finished Job T268. The following data were recorded for this job:
Job T268: Machining Customizing
Machine-hours 80 30
Direct labor-hours 30 50
Direct materials $720 $380
Direct labor cost $900 $1,500
If the company marks up its manufacturing costs by 40% then the selling price for Job T268 would be closest to: (Round your intermediate calculations to 2 decimal places.)
a. $6,763.40
b. $7,440.00
c. $4,831.00
d. $1,932.40
Answer:
a. $6,763.40
Explanation:
The computation of the selling price is shown below:
But before that the predetermined overhead rate is
For machining
= ($102000 ÷ 17,000) + $1.70
= $7.7 per machine hour
For fabrication
= ($61200 ÷ 6000) + $4.10
= $14.30 per labour hour
Now the selling price is
Direct material ($720 + $380) $1,100
Direct labor ($900 + $1,500) $2,400
Machining department overhead (7.7 × 80) $616
Fabrication department overhead (50 × 14.3) $715
Total manufacturing cost $4,831
Markup 40% $1,932.40
Selling price $6,763.40
Manufacturers of large equipment such as aircraft and ships and companies involved in road construction have jobs that may require two or more years for completion. For example, Boeing Corporation might have an order for 50 aircraft for a particular airline, and the order will extend over a three- to five-year period. Aircraft are delivered as completed, but not in a batch of 50 at one time. In the typical fashion, the overhead application rate must be calculated and applied in such a way that each aircraft that is delivered has the proper amount of overhead for that aircraft. Required: What unique difficulties do you see in the calculation and application of overhead in industries such as aircraft manufacturing or shipbuilding
Answer and Explanation:
The unique difficulty that faced by industries in terms of aircraft manufacturing or ship building that includes the measurement of the capciaty cost that would be distributed each year with respect to the job. The overhead would be distributed to the capacity spent. Also the company find to be difficult for tracking the actual capacity i.e. used in the production of a single aircraft or ship. In this case, the predetermined overhead rate would not be worked.
Colin presents his findings in class. His topic -- stories addressing effects of white flour on a person's health – features scientific terminology and descriptions of complex bodily functions. Colin was unsure of the best way to present this information, but Ms. Anderson helped him decide on some useful tools. Colin breaks down the material with analogies, definitions, and visual aids. He can tell his classmates are following along, as they nod in agreement during these points of his presentation
Match the description of public speaking with the type of supporting material it features.
Analogy
А. The owner of a local coffee shop hangs up a map showing the countries the shop purchases its coffee from
Definition
B. A professor asks his students to read the poem as if they are reading poetry for the very first time.
C. A politician reminds his audience that he won 67% of the vote in the last election
Visual Demonstration
D. A film director describes the differences between documentary and fictional films to accoun of
Answer:
Analogy is defined as a comparison between two things with an aim of clarification and explanation
- (D) A firm director describes the differences between documentary and fictional films to a group of people.
Definition means of a text, word,action or concept.
- (B) A professor asks his students to read the poem as if they are reading poetry for the very first time.
Visual Demonstration is an illustrative matter, for example a model, film or a slide designed to supplement spoken or written information in order to be understood easily.
- (A) The owner of a local coffee shop hangs up a map showing the countries the shop purchases it's coffee from.
the point where total expenses equals to total income?
Answer:
yfku
Explanation:
Stephen discusses with his boss his initial ideas on how to approach his hosting duties. His boss claims he is on the right track, but that he should remember to build goodwill in his remarks. Stephen remembers that this will be the workers' introduction to him, so he needs them to trust him in the role of chief operating officer going forward. Although he will be introducing other speakers during the meeting, he doesn't want to get his goals confused. Select the statement that describes something Stephen should do for a goodwill speech.A. Stephen contacts his boss to ask him what information about himself he would like shared. B. Stephen speaks respectfully about his boss and his positive characteristics. C. Stephen tells the workers that he also believes in fairness and teamwork. D. Stephen conducts research to understand more about the corporate executives.
Answer:
D. Stephen conducts research to understand more about the corporate executives.
Explanation:
Analyzing the information above, it is correct to say that a good presentation should be able to retain the public's attention and positively impact people. For this, it is considered that the letter D is the most relevant option for Stephan to achieve his goals in his speech, because knowing his audience in depth will be a decisive factor to align his presentation with the interests of the audience and thus retain attention and integrate them with what is being said. Therefore, research to understand more about corporate executives will lead Stephan to achieve effectiveness in his presentation.
2. How is CrudeOil violating its core value of treating oth-
ers with respect? What are some ways it could reincor-m
porate this core value into its organizational culture??
Answer:
1. Describe the organizational culture at CrudeOil. How does it contribute to the current situation?
Jim treated all of the employees with intimidating behavior based on productivity levels and not moral or ethical concepts. His leadership style is coercive and demands immediate compliance. If this style were summed up in one phrase, it would be "Do what I tell you." In my opinion, it should be avoided because it can alienate employees and create a hostile work environment.
2. How is CrudeOil violating its core value of treating others with respect?
What are some ways it could reincorporate this core value into its organizational culture? “The company’s core value is to treat everyone with respect”. Employees and supervisors, in my experiences, often treat colleagues in harsh and unethical manners only as far as the victim allows it to happen. Financial and reputational harm are questionable and unethical behaviors and organizational policies must be clearly established to reincorporate this value into its culture.
3. If Madison cannot report her problems to her immediate supervisor, what are some other ways she can handle the situation?
I would suggest for Madison to seek advice from a trusted professional, such as the HR compliance officer to verify the actions are inappropriate, if so, Madison needs to learn what process is available for voicing her concern to a higher level. Jim’s behavior is clearly unethical, but many of these behaviors are less clear and occur in complex situations. The most complicated situations often involve employees who witness what is, or appears to be, unethical behavior and are unsure how to respond, especially if job security is on the line...
This is some of it
Jim's leadership abilities breached CrudeOil's fundamental value of treating others with respect because he frequently treats coworkers harshly and unethically.
What are the three main uses of crude oil?Petroleum-based products are used to power vehicles, heat buildings, and generate energy. Plastics, polyurethane, solvents, and countless more intermediate and finished commodities are produced by the petrochemical industry, which is a part of the industrial sector.
Jim's activities should therefore be addressed by top management in order to reintegrate this key principle into the organizational culture. Additionally, they could offer a variety of training to their staff, particularly those in higher positions, to inform them on correct management and leadership skills as well as the significance of adhering to the company's code of ethics.
Learn more about crude oil here:
https://brainly.com/question/4433699
#SPJ2
Marigold Corp. applies overhead on the basis of machine hours. Given the following data, compute overhead applied and the under- or overapplication of overhead for the period:
Estimated annual overhead cost $1400000
Actual annual overhead cost $1375000
Estimated machine hours 500000
Actual machine hours 490000
a. $1372000 applied and $3000 overapplied
b. $1400000 applied and $3000 overapplied
c. $1372000 applied and $3000 underapplied
d. $1375000 applied and neither under-nor overapplied
Answer:
World biggest Logic To solve anything
The Campbell Company is considering adding a robotic paint sprayer to its production line. The sprayer's base price is $820,000, and it would cost another $17,500 to install it. The machine falls into the MACRS 3-year class, and it would be sold after 3 years for $604,000. The MACRS rates for the first three years are 0.3333, 0.4445, and 0.1481. The machine would require an increase in net working capital (inventory) of $15,500. The sprayer would not change revenues, but it is expected to save the firm $338,000 per year in before-tax operating costs, mainly labor. Campbell's marginal tax rate is 25%. (Ignore the half-year convention for the straight-line method.) Cash outflows, if any, should be indicated by a minus sign. Do not round intermediate calculations. Round your answers to the nearest dollar.
a. What is the Year 0 net cash flow?
b. What are the net operating cash flows in Years 1, 2, 3?
c. What is the additional Year 3- cash flow (i.e. after tax salvage and the return of working capital)?
d. If the project's cost of capital is 12%, should the machine be purchased?
Answer:
a. What is the Year 0 net cash flow?
-$820,000 - $17,500 - $15,500 = -$853,000
b. What are the net operating cash flows in Years 1, 2, 3?
Operating cash flow year 1 = {[$338,000 - ($837,500 x 1/3)] x (1 - 25%)} + ($837,500 x 1/3) = $323,292
Operating cash flow year 2 = {[$338,000 - ($837,500 x 0.4445)] x (1 - 25%)} + ($837,500 x 0.4445) = $346,567
Operating cash flow year 3 = {[$338,000 - ($837,500 x 0.1481)] x (1 - 25%)} + ($837,500 x 0.1481) = $284,508
c. What is the additional Year 3- cash flow (i.e. after tax salvage and the return of working capital)?
= $62,031 + [($604,000 - $62,031) x 0.75] + $17,500 = $486,008
d. If the project's cost of capital is 12%, should the machine be purchased?
using a financial calculator, NPV = $260,373, so the project should be accepted
Kingbird Corporation is preparing its December 31, 2020, balance sheet. The following items may be reported as either a current or long-term liability.
1. On December 15, 2020, Kingbird declared a cash dividend of $2.30 per share to stockholders of record on December 31. The dividend is payable on January 15, 2021. Kingbird has issued 1,000,000 shares of common stock, of which 50,000 shares are held in treasury.
2. At December 31, bonds payable of $114,286,000 are outstanding. The bonds pay 12% interest every September 30 and mature in installments of $28,571,500 every September 30, beginning September 30, 2021.
3. At December 31, 2019, customer advances were $12,485,000. During 2020, Kingbird collected $32,673,000 of customer advances; advances of $27,486,000 should be recognized in income.
Required:
For each item above, indicate the dollar amounts to be reported as a current liability and as a long-term liability, if any.
Answer:
1. Dividend payable = (1,00,000 shares - 50,000 shares) shares * $2.30 per shares = $2,185,000 will be reported as current liability (payable within 1 year)
2. Bonds payable (September 30, 2021 installment)= $28,571,500 and interest on bonds = ($114,286,000*12%*3/12) = $3,428,580 are current liabilities whereas Bonds payable (Other than September 30, 2018 installment) =($114,286,000 - $28,571,500) = $85,714,500 are long term liabilities.
3. Customer advances = ($12,485,000 + $32,673,000 - $27,486,000) = $17,672,000 are current liabilities.
Changes in population can:_________.
a. cause the price of a good or service to decrease in an area but cannot cause the price to increase.
b. shift the demand curve of a good or service in an area.
c. cause the price of a good or service to increase in an area but cannot cause the price to decrease.
d. alter the supply of a good or service in an area.
e. shift the supply curve of a good or service in an area.
Answer:
I'm thinking it is C. and D (if multiple choice)
Answer:
The Answer is C
Explanation:
It wouldn't go down if more people will be able to buy the good
Fuzzy Monkey Technologies, Inc., purchased as a long-term investment $220 million of 8% bonds, dated January 1, on January 1, 2018. Management intends to have the investment available for sale when circumstances warrant. When the company purchased the bonds, management elected to account for them under the fair value option. For bonds of similar risk and maturity the market yield was 10%. The price paid for the bonds was $201 million. Interest is received semiannually on June 30 and December 31. Due to changing market conditions, the fair value of the bonds at December 31, 2018, was $210 million.
Required:
a. Prepare the journal entry to record Fuzzy Monkey’s investment on January 1, 2018.
b. Prepare the journal entry by Fuzzy Monkey to record interest on June 30, 2018.
c. Prepare the journal entries by Fuzzy Monkey to record interest on December 31, 2018.
Answer:
January 1, 2018
Dr Investment in bonds 220,000,000
Cr Cash 201,000,000
Cr Discount on investment in bonds 19,000,000
June 30, 2021
Dr Cash 8,800,000
Dr Discount on investment in bonds 1,250,000
Cr Interest revenue 10,050,000
December 31, 2018
Dr Cash 8,800,000
Dr Discount on investment in bonds 1,312,500
Cr Interest revenue 10,112,500
discount amortization = ($201,000,000 x 5%) - $8,800,000 = $1,250,000
discount amortization = ($202,250,000 x 5%) - $8,800,000 = $1,312,500
Who Is Lil Loaded i want to know
Answer:
search it up
Explanation:
Answer:
he is a rapper dude. search it up
Explanation:
Favaz began business at the start of this year and had the following costs: variable manufacturing cost per unit, $9; fixed manufacturing costs, $60,000; variable selling and administrative costs per unit, $2; and fixed selling and administrative costs, $220,000. The company sells its units for $45 each. Additional data follow: Planned production in units10,000 Actual production in units10,000 Number of units sold8,500 There were no variances. The income (loss) under absorption costing is:
Answer:
$18,000
Explanation:
Calculation for what The income (loss) under absorption costing is:
First step is to calculate the Fixed manufacturing
per unit
Fixed manufacturing per unit = $60,000 ÷ 10,000
Fixed manufacturing per unit= $6
Second step is to calculate per unit cost
Cost Per Unit=$45 − $9 − $2 − $6 ×$ 8,500
Cost Per Unit = $238,000
Now let calculate the income (loss)
Income (loss)= $238,000 − $220,000
Income (loss) = $18,000
Therefore The income (loss) under absorption costing is:$18,000
What unique things words separate you from other applicants Applying for this funding?
Answer:
Having to handle the business side of things while also working on developing a great product wasn't easy, but that challenge helped me grow as a professional. I think a lot of people applying for tech
Explanation:
:D
