Answer:
The root pass is made with a 5/32” (4.0mm) diameter electrode. A cellulosic electrode (E-XX10) is being used. The root pass is welded with reverse (DC+) polarity.
Explanation:
In root pass welding, that electrode we are going to use cellulosic electrode (E-XX10).
What is root pass welding?Short arc welding is commonly used for root pass welding to prevent blow through and overheating at the weld joint. Because there is less drooping and suck back, short arc welding is also commonly used on root pass joints.
The first pass in any welding process that combines two pieces or members into one structure is referred to as the root pass.
Subsequent passes raise the weld depth to the desired thickness, resulting in the required strength. The first pass usually serves as the foundation for subsequent filler passes.
A 5/32" (4.0mm) diameter electrode is used for the root pass. A cellulosic electrode (E-XX10) is being used. The root pass is welded with reverse (DC+) polarity.
Thus, cellulosic electrode (E-XX10) for this.
For more details regarding welding, visit:
https://brainly.com/question/25428489
#SPJ2
What does it mean when the
compressions of a longitudinal
wave are far apart?
A. the amplitude is higher
B. the wavelength is longer
C. the wavelength is shorter
D. the amplitude is shorter
Answer:
it will option B,hope it helps
C. The wavelength is longer.
What is longitudinal wave?
A sound wave is called a longitudinal wave because compressions and rarefactions in the air produce it.
The air particles vibrate parallel to the direction of propagation.
A longitudinal wave consists of a repeating pattern of compressions and rarefactions.
Thus, the wavelength is commonly measured as the distance from one compression to the next adjacent compression or the distance from one rarefaction to the next adjacent rarefaction.
Longitudinal waves move through a medium from the point of the disturbance in the form of compressions (where particles of the medium are bunched together) followed by rarefactions (where particles of the medium are farther apart).
In longitudinal waves, the distance from one compression to the next is the wavelength.
Therefore,
In longitudinal wave the wavelength is longer.
Learn more about Longitudinal wave here:
https://brainly.com/question/2463407
#SPJ2
Identifying Applications of Electromagnetic Waves
Quick
Check
Match the electromagnetic wave with its application.
ultraviolet waves
disruption of DNA production in bacteria
and viruses
gamma rays
destruction of cancer cells
X-rays
diagnosis of illnesses through medical
imaging
Answer:
gamma ray-destruction of cancer cells
Ultraviolet wave-disruption of DNA
X-ray-diagnosis of illnesses through medical
Explanation: on edg
Answer:
Here
Explanation:
An object moving in the air at a constant speed is considered to be in a balanced state. Explain Why
Answer:
and there is no friction
Explanation:
An object at rest has zero velocity - and (in the absence of an unbalanced force) will remain with a zero velocity. Such an object will not change its state of motion (i.e., velocity) unless acted upon by an unbalanced force. An object in motion with a velocity of 2 m/s, East will (in the absence of an unbalanced force) remain in motion with a velocity of 2 m/s, East. Such an object will not change its state of motion (i.e., velocity) unless acted upon by an unbalanced force. Objects resist changes in their velocity.
A wave hits an object as shown. A vertical line with Medium 1 to the left and Medium 2 to the right. An arrow from the left reaches the line. An arrow starts from the same point on the line and goes right at a different angle. Which kind of wave interaction is shown?
Answer:
refraction
Explanation:
When the wave moves from medium 1 to medium 2, then the wave gets refracted. Then the correct option is C.
What is the wave?A wave is an energetic disturbance in a medium that doesn't include any net particle motion. Elastic deformation, a change in pressure, an electric or magnetic intensity, an electric potential, or a change in temperature are a few examples.
A wave is a dynamic disturbance of one or more variables that propagates in physics, geometry, and related sciences. When waves oscillate frequently around an equilibrium value at a certain frequency, they are said to be periodic.
The bending of waves as they go from one substance to another is known as wave refraction. It bends when the wave enters a new material because the wave's speed changes. The optical density or index of refraction of the material affects how light waves bend.
Thus, the correct option is C.
More about the wave link is given below.
https://brainly.com/question/29334933
#SPJ6
The missing options are given below.
absorption
diffraction
refraction
reflection
If the voltage of a circuit is 6V, and the power is 4W, what is its resistance?
Answer:
9 ohms
Explanation:
P = V²/R
R = v²/p = 6²/4 = 36/4 = 9 ohms.
The resistance is 9 Ohm.
To find the resistance, we need to know about the power in term of resistance and voltage.
What is the value of power in terms of resistance and voltage?We know that power=work/timeElectrostatics work is given as voltage ×charge. So, power=(Voltage×charge)/timeAgain, charge/time is given as current. So, power = Voltage×currentFrom Ohm's law, we know that current=voltage/resistance. So, power= voltage ²/resistance. What is the resistance, if power is 4W and voltage is 6V?Resistance in term of power and voltage is given as Resistance= voltage ²/powerSo, resistance=6²/4=36/4= 9 OhmThus, we can conclude that the resistance is 9 Ohm.
Learn more about the electrical power here:
brainly.com/question/16054310
#SPJ2
Where did Ford first see parts made from vanadium steel? What properties of this steel impressed Ford? Did Ford need to overcome any problems before going ahead with his plan?
Explanation:
Historical sources believe that Henry Ford first saw parts made from vanadium steel in Europe which were been used on racing cars and luxurious vehicles.
Ford was impressed due to the fact that Vanadium steel unlike normal steel was cheaper and at the same time stronger and lighter if it was used on automobiles.
(V) What are the objectives of the space mission?
Explanation:
I hope this helps, I got this from another person
5. Identify the reactants in this chemical equation:
2H3PO4 → HAP20, +H2O
Answer:
H=Hydrogen, PO4=Phosphate
Explanation:
Reactions are on the left side of arrow and products are on the right side of arrow.
A player throws a basketball with a force of 30.0 N. If the mass of the basketball is 0.625 kg, what acceleration (in m/s) does the player give to the ball?
Answer:
your answer should be 48 m/s.
Explanation:
the total for was 30N and the formula for force is F=m*a divide the force by the known, in this case the mass. 30/0.625=48 m/s
A car drives 40 km due east and then 50 km due west .what is the cars overall displacement?
Answer:10 km westExplanation:he go 40 east then 50 west 50-40 is 10 so he displaces 10 km and as west is more than east in terms of km so we will say that it's 10 km west pls mark as brainliest thanks
The car's overall displacement if, A car drives 40 km due east and then 50 km due west is 10 km in the west.
What is displacement?Displacement is defined as the overall alteration of an object's location and motion direction. Displacement is recognized as a vector quantity since it takes into account both the direction of the motion and the magnitude of the changing position. Displacement may be zero, positive, or negative.
Given:
A car drives 40 km due east and then 50 km due west,
Consider the west direction as positive and the east direction as negative, then,
The displacement = Displacement in the west + displacement in the east,
The displacement = 50 - 40
The displacement = 10
As the sign is positive, then the direction would be west.
Thus, the displacement of the car is +10 km.
To know more about displacement:
https://brainly.com/question/11934397
#SPJ2
Which of the following waves has the longest wavelength? Group of answer choices a.ultraviolet b.gamma c.visible light d.microwaves
Answer: visible light
Explanation:
Which of the following would decrease the overall force felt between two charges the most?
Question 9 options:
A. Doubling the charge on the first object
B. Doubling the charge on the second object
C. Doubling the distance between the charges
If one charge is tripled and the other is cut in half, what happens to electric force?
Question 10 options:
A. It is decreased by 10 times the original force
B. It is increased by 1.5 times the original force
C. It is increased by 10 times the original force
D. It is decreased by 1.5 times the original force
Doubling the distance between the charges would decrease the overall force felt between two charges the most. The force felt between two charges is inversely proportional to the square of the distance.
What is Columb's law?
The force of attraction between two charges, according to Coulomb's law, is directly proportional to the product of the charges and inversely proportional to the square of the distance between them.
[tex]\rm F= \frac{Kq_1q_2}{r^2}[/tex]
The force felt between two charges is inversely proportional to the square of the distance.
Doubling the distance between the charges. The force felt between two charges is decreased 4 times the previous force.
Doubling the distance between the charges would decrease the overall force felt between two charges, the most.
Hence, option C is correct.
To learn more about Columb's law, refer to the link;
brainly.com/question/1616890
#SPJ2
pls help i’ll give brainliest if you give a correct answer!!
A hockey puck, with an initial velocity of 65 km/h [W], ricochets off the boards. After 0.76 s in contact with the boards, its final velocity is 47 km/h [E]. Determine the acceleration of the puck.
Answer:
a = 40.937 m / s²
Explanation:
For this exercise let's use the relationship between momentum and momentum variation
I = Δp
F t = m v_f - mv₀
F = m (v_f -v₀) / t
let's reduce the magnitudes to the SI system
v_f = 47 km / h (1000m / 1 km) (1h / 3600 s) = 13.056 m / s
v₀ = - 65 km / h = -18.056 m / s
the negative sign is bearing the speed is west
let's calculate
F = m (13.056 + 18.056) / 0.76
F = m 40.937
now we can use Newton's second law
F = m a
m 40.937 = m a
a = 40.937 m / s²
how do I write an essay on how I feel about online school
Answer:
Some students appreciated the social aspect of Zoom classrooms, while others felt online education worked best for them when they were working on their own. ... Students said they appreciated having a well-planned work week and didn't appreciate “surprise” assignments online any more than they appreciate them in class
Explanation:
What's I know I said
What do you u write it
13-1 LIVE
2, A rectangulv Container of base socmby 30cm is filled
with water to be depth of 5cm. how much is the pressure exerted
at the base? (take pw= 1000kg /m3 and g=10m/s)
Correct question is;
2, A rectangular Container of base 50 cm by 30cm is filled with water to be depth of 5cm. how much is the pressure exerted at the base? (take pw= 1000kg /m3 and g=10m/s)
Answer:
P = 500 N/m²
Explanation:
Pressure exerted at the base is the hydrostatic pressure and it is given by the formula;
P = ρgh
Where;
ρ is density = 1000 kg/m³
g = 10 m/s²
h is depth = 5 cm = 0.05 m
Thus;
P = 1000 × 10 × 0.05
P = 500 N/m²
A female skater with mass 45 kg and velocity 7 m/s leaps into her partner's arms. If her partner is has a mass of 60 kg and a forward velocity of 1.5 m/s, how fast are the two of them going after he catches her?
Please provide an explanation, random answers will be reported thank you.
Explanation:
this is the answer for your question further if you have any doubts
zoom id: 85281915789
password:n8LXQW
1:What kind of energy does your body use to keep you warm.
2: What are two examples of something that stores chemical energy
3: All forms of energy can be transferred into what?
4: When energy changes from one type to another, this is called what?
5: Friction created by a car tire rubbing on a road creates what energy transportation? {blank} energy into {blank energy}
6: What type of energy transformation occurs when oil is used to heat a home? {blank} energy into {blank} energy? ( this is due today and it would really help me out if you could help me)
Answer:
1. thermal energy
2. Batteries and coal
4. energy conversion
When a system fails it _____ our other systems causing us to be sick.
A. connects
B. repairs
C. affects
D. structures
Answer:
c) affects
Explanation:
im like 90% sure
Anyone who answer will get brainlest
Answer:
D
Explanation:
work = Force x distance
work = 2000 x 2 = 4000
power = work÷ time
4000/.8 = 5000W
Answer:
The answer is D 5000w
Explanation:
work = Force x distance
work = 2000 x 2 = 4000
power = work÷ time
4000/.8 = 5000W
Which of the following have the most GPE. 1.) a car at the top of a hill 2.) a car at the bottom of the hill 3.) a car half way down the hill 4.) on the straight part of the track. (I don't know how to give Brainly)
Answer: car at the top of a hill
Explanation:
One can expect good quality produce if proper attention is given to the proper
selection of planting materials. TRUE or FALSE ?
Answer:
True.
Explanation:
One can expect good quality produce if proper attention is given to the proper selection of planting materials.
Oscillations of electricity and magnetism create ________________________ waves, which include visible light waves.
Explanation:
radio waves, which include visible light waves.
balance the equation
P + 02 → P205
Answer:
4P + 502 → 2P205
Explanation:
Hence the above equation is balanced.
Explanation:
[tex] \underline{ \underline{ \large{ \text{Given \: chemical \: equation}}}} : [/tex]
[tex] \tt{P \: + O _{2} \: \: \: \: ➞ \: \: P_{2} \: O_{5}}[/tex]Here , Multiply P2O5 by 2 and O2 by 5 to equalize oxygen :
[tex] \tt{P+ 5O_{2} \: \: ➞\: \: 2P_{2} \:O_{5}}[/tex]
Now , To equalize P atoms , Multiply P by 4
[tex] \boxed{ \large{\tt{ 4P + 5O _{2} \: ➞ \: \: \: \: 2P_{2} \: O_{5}}}}[/tex]
Here , On the left side we have 4P and On the right side ,we have 4P. Again , On the left side , we have 10 O and On the right side , we have 10 O. And yippie , we got the balanced chemical equation !!!
Hope I helped ! ♡
Have a wonderful day / night ! ツ
▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
Identify the phase and division I or II for the following:
Metaphase II
Metaphase I
Telophase II
Cytokinesis
Answer:
Metaphase II
Explanation:
Metaphase II is the division of two daughter cells and is when sister chromatids line up in the middle of the cell. This is what appears to be happening in the image. Additionally, you can see that the chromosomes have already crossed over.
Metaphase I only involves 1 cell, not 2 daughter cells.
Telophase II and Cytokinesis are when the cell splits. Also, Telophase II would result in 4 daughter cells, not just 2.
If the net force acting on an object is zero, its inertia is also zero.
True or false
Answer:
its false
Explanation:
House current is 120 volts. If a light bulb runs a current of 0.5 amps, what the resistance of the bulb? (Please please help!)
Resistance = (voltage) divided by (current)
= (120 V) / (0.5 Amp)
= 240 ohms .
Un automóvil viajó 186.4 Km a una velocidad constante de 57 Km/h. ¿Cuánto tiempo se necesitó para el viaje?
Answer:
t = 1.177 10⁴ s
Explanation:
For this exercise we use the uniform motion relationships
v = x / t
t = x / v
let's reduce the magnitudes to the SI system
v = 57 km / h (1000m / 1km) (1h / 3600s) = 15.833 m / s
x = 186.4 km (1000m / 1 km) = 186.4 10³ m
let's calculate
t = 186.4 10³ / 15.833
t = 11.77 10³ s
t = 1.177 10⁴ s
Please help. Will give branliest!!
Which action is an example of a force that operates at a distance.
A. A baseball thrown by a player.
B. A pebble falling to the ground
C. Fish swimming in the water
D. A sailboat sailing on a lake
An action which is an example of a force which operates at a distance is a pebble falling to the ground. Thus, the correct option is B.
What is force?A force is an influence which can be changed upon with the motion of an object. A force can cause an object with some amount of mass to change the velocity of the object, i.e., to accelerate the object. Force can also be described as a push or a pull of the object. A force is a vector quantity because it has both the magnitude and direction.
A pebble falling to the ground level is an example of the force which operates at a specific distance. A force applied on the pebble covers some distance.
Therefore, the correct option is B.
Learn more about Force here:
https://brainly.com/question/13191643
#SPJ1
Pick all the right ones !!
