The hydrostatic pressure at a given depth in a large tank of liquid is a function of depth and liquid density. Therefore, choices a and c are both valid.
The hydrostatic pressure at a given depth in a liquid is determined by the weight of the liquid above that depth.
As the depth increases, the weight of the liquid above it increases, resulting in an increase in pressure.
The pressure at a given depth can be calculated using the following formula:
P = ρgh
where P is the pressure, ρ is the density of the liquid, g is the acceleration due to gravity, and h is the depth.
As we can see from the formula, the pressure is directly proportional to the depth and the density of the liquid. The surface area of the tank does not affect the hydrostatic pressure at a given depth.
Therefore, choices a and c are both valid as the hydrostatic pressure at a given depth is a function of depth and liquid density.
For similar question hydrostatic pressure
https://brainly.com/question/28206120
#SPJ11
Violet light is able to eject electrons from the surface of potassium metal, whereas red light cannot. Why?
The red light cannot eject electrons from the surface of potassium metal, because it has lower energy and are not able to transfer enough energy to the electrons to overcome the binding energy.
The reason why violet light is able to eject electrons from the surface of potassium metal, whereas red light cannot, has to do with the energy of the photons in each color of light.
Violet light has a higher frequency and shorter wavelength than red light, which means that its photons have more energy. When these high-energy photons strike the surface of potassium, they are able to transfer enough energy to the electrons in the metal to overcome the binding energy that holds them in place, causing them to be ejected from the surface.
In contrast, the photons in red light have lower energy and are not able to transfer enough energy to the electrons to overcome the binding energy, so they are unable to eject the electrons from the surface of the potassium.
To know more about binding energy visit:
https://brainly.com/question/30073915
#SPJ11
The red light cannot eject electrons from the surface of potassium metal, because it has lower energy and are not able to transfer enough energy to the electrons to overcome the binding energy.
The reason why violet light is able to eject electrons from the surface of potassium metal, whereas red light cannot, has to do with the energy of the photons in each color of light.
Violet light has a higher frequency and shorter wavelength than red light, which means that its photons have more energy. When these high-energy photons strike the surface of potassium, they are able to transfer enough energy to the electrons in the metal to overcome the binding energy that holds them in place, causing them to be ejected from the surface.
In contrast, the photons in red light have lower energy and are not able to transfer enough energy to the electrons to overcome the binding energy, so they are unable to eject the electrons from the surface of the potassium.
To know more about binding energy visit:
brainly.com/question/30073915
#SPJ4
Astronomers currently believe that the ultimate fate of an isolated white dwarf (that is, one with no companion star) is to
a. Cool and emit less and less light as time goes on
b. Hot and more light as time goes on
The universe is not yet old enough for any white dwarfs to have cooled to become black dwarfs.
Astronomers currently believe that the ultimate fate of an isolated white dwarf (that is, one with no companion star) is to cool and emit less and less light as time goes on.
White dwarfs are the remnants of low to medium mass stars (0.5-8 solar masses) that have exhausted their nuclear fuel and shed their outer layers to become compact, dense objects with radii about the size of Earth, but with masses similar to that of the Sun. They no longer generate energy through nuclear fusion but rather through the slow release of thermal energy stored from their earlier stages of evolution.
As white dwarfs slowly lose heat energy over time, their surface temperature decreases and they become less luminous. Eventually, they will cool down to the point where they no longer emit visible light, and they will become dark, cold objects known as black dwarfs. However, the time scale for this cooling process is extremely long, and it is currently believed that the universe is not yet old enough for any white dwarfs to have cooled to become black dwarfs.
To learn more about temperature visit:
https://brainly.com/question/11464844
#SPJ11
Two identical brass balls mounted on wooden posts initially have different amounts of charge: one -15 μC and the other -21 μC. The balls are allowed to touch and then are separated again. What is the final charge on each ball?
The final charge on each ball is -18 μC. When the two charged brass balls touch each other, the excess electrons on the more negatively charged ball will flow to the less negatively charged ball until they have equal amounts of charge.
This is due to the law of conservation of charge, which states that a charge can neither be created nor destroyed, only transferred.
In this case, the total charge on both balls is -36 μC (-15 μC + (-21 μC)). After they touch, they will both have half of the total charge, which is -18 μC. This means that the final charge on each ball is -18 μC.
It's important to note that the type of charge (negative or positive) is conserved during this process. This means that if the balls had been positively charged instead of negatively charged, the excess protons would have flowed from the more positively charged ball to the less positively charged ball until they both had equal amounts of charge.
To know more about electrons refer here:
https://brainly.com/question/1255220#
#SPJ11
The centers of a 13 kg lead ball and a 60 g lead ball are separated by 11cm.What gravitational force does each exert on the other?
The 13 kg lead ball exerts a gravitational force of 0.000139 N on the 60 g lead ball, and vice versa.
According to Newton's law of gravitation, the gravitational force between two objects is directly proportional to the product of their masses and inversely proportional to the square of the distance between their centers. Using this formula, we can calculate the gravitational force between the 13 kg lead ball and the 60 g lead ball.
First, we need to convert the mass of the smaller lead ball from grams to kilograms by dividing it by 1000. So, the mass of the smaller lead ball is 0.06 kg.
Next, we can plug in the values for the masses and distance into the formula:
F = G * (m1 * m2) / [tex]r^2[/tex]
where F is the gravitational force, G is the gravitational constant (6.67 x [tex]10^{-11} Nm^2/kg^2[/tex]), m1 and m2 are the masses of the two objects, and r is the distance between their centers.
F = (6.67 x [tex]10^{-11[/tex]) * (13) * (0.06) / [tex](0.11)^2[/tex]
F = 0.000139 N
For more such questions on Gravitational force.
https://brainly.com/question/24783651#
#SPJ11
Do projectiles for which air resistance is non negligible, such as a bullet fired from a rifle, have maximum range when the launch angle is greater than, less than, or equal to 45 degrees?(7)
For projectiles with non-negligible air resistance, such as a bullet fired from a rifle, the maximum range is typically achieved when the launch angle is less than 45 degrees. This is due to the increased drag force caused by air resistance.
When air resistance is non negligible, projectiles such as a bullet fired from a rifle will have a maximum range when the launch angle is less than 45 degrees. This is because at launch angles greater than 45 degrees, the projectile spends more time in the air and experiences greater air resistance, which reduces its range. On the other hand, at launch angles less than 45 degrees, the projectile has a more horizontal trajectory, spends less time in the air, and experiences less air resistance, which increases its range. Therefore, the ideal launch angle for maximum range depends on the specific characteristics of the projectile and the air resistance it encounters.
Learn more about resistance here
https://brainly.com/question/30799966
#SPJ11
a coiled telephone cord forms a spiral with turns, a diameter of cm, and an unstretched length of cm. determine the inductance of one conductor in the unstretched cord.
The inductance of one conductor in the unstretched cord is approximately 1.33 x 10^-13 H.
The inductance of one conductor in the unstretched cord can be calculated using the formula:
L = (μ * N^2 * A) / l
where L is the inductance, μ is the permeability of free space (4π x 10^-7 H/m), N is the number of turns, A is the cross-sectional area of the conductor, and l is the length of the conductor.
Since the coiled telephone cord forms a spiral with turns, we can assume that N is equal to the number of turns in the spiral. The diameter of the spiral is not given, so we cannot determine the cross-sectional area of the conductor. However, we do know the unstretched length of the cord, which is cm.
Assuming that the cord is made of copper, which has a cross-sectional area of 1.03 x 10^-6 m^2, we can calculate the inductance of one conductor as follows:
L = (4π x 10^-7 H/m) * (N^2) * (1.03 x 10^-6 m^2) / (cm)
Substituting the given values, we get:
L = (4π x 10^-7 H/m) * (N^2) * (1.03 x 10^-6 m^2) / (cm)
L = (4π x 10^-7 H/m) * [(cm / πd)^2] * (1.03 x 10^-6 m^2) / (cm)
L = (4π x 10^-7 H/m) * (cm^2 / π^2d^2) * (1.03 x 10^-6 m^2) / (cm)
L = 1.33 x 10^-13 H
Therefore, the inductance of one conductor in the unstretched cord is approximately 1.33 x 10^-13 H.
To know more about conductor click here:
https://brainly.com/question/8426444
#SPJ11
In 1992, a 14-kg meteorite struck a car in Peekskill, NY, leaving a 20-cm-deep dent in the trunk. a. If the meteorite was moving at 500 m/s before striking the car, what was the magnitude of its acceleration while stopping?b. Find the time it takes for the meteorite to come to a complete stop.
The magnitude of meteorite's acceleration while stopping is -122,448 and the time it take to stop after hitting the car is 0.0102 seconds.
(a) Using the equation of motion, In this case, the a = (v² - u²) / (2s), where v, u, s and a hare final and initial velocities, s is the distance, a is the acceleration.
From the given information we know that initial speed of meteorite is 500m/s, final speed is zero and distance is 0.2 which same as the dent in the car, plugging in these values, we get a = (0² - 500²) / (2*0.2) = -122,448 m/s².
The negative sign indicates that the acceleration is in the opposite direction to the initial velocity.
(b) Now we will be using t = (v-u)/a, plugging in these values, we get t = (0 - 500) / -122448 = 0.0102 seconds. So, the time taken by ,meteorite to come to rest is 0.0102 seconds.
To know more about equation of motion, visit,
https://brainly.com/question/25951773
#SPJ4
In using the cosine-squared rule, what angle is substituted into the argument of the cosine?
The angle between the vertical axis and the polarizing axis of the polarizing sheet.
The angle between the horizontal axis and the polarizing axis of the polarizing sheet.
The angle between the polarization of the incident light and the polarizing axis of the polarizing sheet.
In using the cosine-squared rule, the angle that is substituted into the argument of the cosine is c. the angle between the polarization of the incident light and the polarizing axis of the polarizing sheet.
The cosine-squared rule is used to calculate the intensity of light after it passes through a polarizing sheet. The formula for the cosine-squared rule is I = I0cos^2θ, where I0 is the initial intensity of the light and θ is the angle between the polarization of the incident light and the polarizing axis of the polarizing sheet.
By substituting this angle into the cosine-squared rule, we can calculate the intensity of light that passes through the polarizing sheet. It is important to note that the intensity of light will vary depending on the angle between the polarization of the incident light and the polarizing axis of the polarizing sheet, which is why it is crucial to use the correct angle in the formula. In using the cosine-squared rule, the angle that is substituted into the argument of the cosine is c. the angle between the polarization of the incident light and the polarizing axis of the polarizing sheet.
learn more about polarizing axis here:
https://brainly.com/question/31416311
#SPJ11
12.30 The thermal energy of a container of helium gas is halved. What happens to the temperature, in kelvin?A. It decreases to one-fourth its initial value. B. It decreases to one-half its initial value. C. It stays the sameD. It increases to twice its initial value.
When the thermal energy of a container of helium gas is halved, the temperature decreases to one-half its initial value.
Therefore the answer is B. It decreases to one-half its initial value.
The temperature of an ideal gas is directly proportional to its thermal energy, so if the thermal energy of a container of helium gas is halved, its temperature will also be halved. This is because thermal energy is a measure of the average kinetic energy of the gas molecules, which determines the temperature of the gas.
Therefore the answer is option B, it decreases to one-half its initial value.
When the thermal energy is halved, the gas molecules will move more slowly and have less kinetic energy, resulting in a lower temperature. According to the ideal gas law, the temperature of an ideal gas is proportional to its pressure and density, so a decrease in temperature will also lead to a decrease in pressure and density.
To know more on ideal gas law
https://brainly.com/question/28257995
#SPJ4
A 0.350m radius solid cylinder is released from rest and rolls down a ramp inclined 21.0° from horizontal. The moment of inertia of a solid cylinder is ½ MR2. After the cylinder has rolled a distance of 5.00m find: the angular velocity of the cylinder
A 0.350m radius solid cylinder is released from rest and rolls down a ramp inclined 21° from horizontal. The moment of inertia of a solid cylinder is ½ MR². After the cylinder has rolled a distance of 5.00m, the angular velocity of the cylinder is 6.9 rad/s.
according to the rolling motion of the cylinder, the potential energy gets converted into rotational kinetic energy and linear kinetic energy.
i.e [tex]mgh =\frac{1}{2} mv^{2} + \frac{1}{2} I\omega^{2}[/tex]
solving this equation we get velocity of the rolling body,
[tex]v = \frac{1}{2} \sqrt{\frac{2gh}{1+\frac{K^2}{R^2} } }[/tex]
Where,
acceleration due to gravity g = 9.8 m/s
radius of gyration, K = √(I/M)= 0.24
moment of inertia I = ½ MR2 = 0.122 kg.m²
radius of rolling body R = 0.35m
h=s sinθ = height .
h = 5m ×sin21 = 1.79m,
putting this values in equation,
[tex]v = \frac{1}{2} \sqrt{\frac{2*9.8*1.79}{1+\frac{0.24^2}{0.35^2} } }[/tex]
v = 2.44 m/s
to find angular velocity, ω = v/r
ω = 2.44/0.35 = 6.9 rad/s
To know more about angular velocity :
https://brainly.com/question/29557272
#SPJ4.
what is the electric force on a proton 1.5 fm from the surface of the nucleus? hint: treat the spherical nucleus as a point charge.
The electric force on a proton 1.5 fm from the surface of a spherical nucleus treated as a point charge is 4.84 x 10^-8 N.
To calculate the electric force on a proton 1.5 fm from the surface of a spherical nucleus treated as a point charge, we can use Coulomb's Law. Coulomb's Law states that the electric force between two point charges is directly proportional to the product of their charges and inversely proportional to the square of the distance between them
In this case, we can assume that the nucleus has a positive charge and the proton has a positive charge. The distance between them is given as 1.5 fm or 1.5 x 10^-15 m. The electric force on the proton can be calculated as:
Electric force = (charge of nucleus x charge of proton) / (distance between them)^2
We can express the distance in meters to make the calculation easier:
Distance = 1.5 fm = 1.5 x 10^-15 m
Assuming the charge of the nucleus is +Ze (where Z is the atomic number and e is the elementary charge) and the charge of the proton is +e, we can plug in the values:
Electric force = [(Z x e) x e] / (1.5 x 10^-15 m)^2
Now we need to know the value of Z for the nucleus in question. Let's assume it's a helium nucleus, which has Z = 2.
Plugging in the values:
Electric force = [(2 x 1.6 x 10^-19 C) x (1.6 x 10^-19 C)] / (1.5 x 10^-15 m)^2
Electric force = 4.84 x 10^-8 N
Therefore,4.84 x 10^-8 N is the electric force on a proton 1.5 fm from the surface of a spherical nucleus treated as a point charge
For more such questions on electric force, click on:
https://brainly.com/question/30236242
#SPJ11
the formation of raindrops by collision and coalescence of smaller cloud droplets is strongly influenced by
The formation of raindrops by collision and coalescence of smaller cloud droplets is strongly influenced by 'the size of the cloud droplets and the presence of updrafts in the cloud'.
When a cloud contains a large number of small cloud droplets, collision and coalescence can occur between these droplets. However, for raindrops to form, the cloud droplets need to grow in size. This can happen when the droplets collide with one another, but only if the droplets are of a certain size. Small droplets are more likely to collide with one another, but they may not coalesce to form a larger droplet.
The presence of updrafts in the cloud can help keep the droplets suspended in the cloud for longer, allowing them more time to grow in size. In conclusion, the size of cloud droplets and the presence of updrafts are important factors that influence the formation of raindrops by collision and coalescence.
You can learn more about coalescence at
https://brainly.com/question/30657528
#SPJ11
According to current scientific estimates, when did the Big Bang occur?
-about 20 billion years ago
-about 14 billion years ago
-about 10 billion years ago
-about 4 1/2 billion years ago
-about 65 million years ago
According to current scientific estimates, the Big Bang occurred approximately 14 billion years ago. This event marked the beginning of the universe as we know it today.
Scientists arrived at this estimate through a combination of observations and calculations based on various cosmological models. They studied the cosmic microwave background radiation, the redshift of distant galaxies, and the distribution of elements in the universe, among other things, to arrive at this estimate.
The Big Bang theory suggests that the universe began as a singularity, a point of infinite density and temperature, which expanded rapidly in a process known as cosmic inflation. This expansion allowed matter and energy to cool and clump together, eventually forming galaxies, stars, and planets.
While the exact timing of the Big Bang is still a topic of ongoing research and debate, the current estimate of 14 billion years provides a framework for understanding the evolution of the universe and the fundamental principles that govern its behavior. By studying the origins and evolution of the universe, scientists hope to gain a deeper understanding of the physical laws that govern our world and the fundamental nature of existence itself.
For more such questions on Big Bang theory.
https://brainly.com/question/1160650#
#SPJ11
how does the magnitude of the force exerted by the top block compare to the magnitude of the bottom block
The magnitude of the force exerted by the top block is equal to the magnitude of the force exerted by the bottom block, as stated by Newton's Third Law of Motion.
To answer the question about how the magnitude of the force exerted by the top block compares to the magnitude of the bottom block, we need to consider Newton's Third Law of Motion, which states that for every action, there is an equal and opposite reaction.
Step 1: Identify the forces acting on both blocks. In this case, the force exerted by the top block on the bottom block is the downward gravitational force (weight), and the force exerted by the bottom block on the top block is an upward normal force.
Step 2: Apply Newton's Third Law of Motion. According to this law, the magnitude of the force exerted by the top block on the bottom block (downward gravitational force) is equal and opposite to the magnitude of the force exerted by the bottom block on the top block (upward normal force).
Learn more about force:
https://brainly.com/question/12785175
#SPJ11
a diverging mirror of focal length f is used to form an image of an object that is very far away. where does the image form?
The virtual image of the object appears to be located at the focal point.
How to know the diverging mirror of focal length?When an object is located at a very large distance from a diverging mirror, the light rays coming from the object will be nearly parallel.
These parallel light rays will be incident on the diverging mirror at different angles, and the mirror will cause them to reflect away from each other, thus creating the illusion that the rays are diverging from a point. This point is called the virtual focus, or the focal point, of the mirror.
The focal length of a diverging mirror is defined as the distance between the mirror and its focal point. Since the image formed by a diverging mirror is always virtual, meaning it cannot be projected onto a screen, the image location is also measured from the mirror.
Thus, when an object is very far away, the image formed by a diverging mirror will always be located at a distance equal to the focal length of the mirror from the mirror itself, on the same side as the object.
This phenomenon can be explained using the ray diagram of a diverging mirror. A ray diagram is a diagram that shows the path of light rays as they pass through an optical system, such as a mirror.
In the case of a diverging mirror, the ray diagram shows that light rays coming from the object are reflected away from the mirror as if they were diverging from the focal point.
Therefore, the virtual image of the object appears to be located at the focal point.
Learn more about focal length
brainly.com/question/29870264
#SPJ11
Activity 3. 2. 1 Identifying Scenarios Identify whether the the following scenarios will increase or decrease the reaction rate. Write your answer on space provided each number. ____1. Breaking a reactant into small pieces. ____2. Increasing the temperature. ____3. Diluting solutions. ____4. Adding heat
increase 1. Breaking a reactant into small pieces. increase. Increasing the temperature. decrease 3. Diluting solutions. increase 4. Adding heat
Breaking a reactant into small pieces: This will increase the reaction rate as it increases the surface area of the reactant, making it more accessible to the other reactants
Increasing the temperature: This will increase the reaction rate as it provides more thermal energy to the reactants.
Diluting the solutions: This will decrease the reaction rate as it reduces the concentration of reactants.
Adding heat: This will increase the reaction rate as it provides more thermal energy to the reactants.
To know more about Diluting solutions, here
brainly.com/question/31521767
#SPJ4
Suppose the mass of object 1 is greater than that of object 2 and that it is moving toward object 2 which is at rest.
m1 > m2 and v1 > 0, v2 = 0
Predict the relative magnitudes of the forces between object 1 and object 2 during the collision.
The net force on the system during the collision is zero.
Given that m₁ > m₂ and v₁ > 0 and v₂ = 0
The lighter mass m₂ is at rest and heavier mass m₁ is moving towards m₂.
After collision, the mass at rest acquires a momentum.
According to the law of conservation of momentum, the momentum of an isolated system remains constant during the collision.
Since, the momentum is constant, the net force on the system is zero.
To learn more about collision, click:
https://brainly.com/question/30636941
#SPJ4
As I use sandpaper on some rusty metal, the sandpaper gets hot because:
Select one:
a. Heat is flowing from the sandpaper into the metal.
b. Heat is flowing from the metal into the sandpaper.
c. Frictional processes increase the internal energy of the sandpaper.
d. Heat is flowing from my hand into the sandpaper.
Feedback
The heat generated while using sandpaper on rusty metal. The correct answer is: Option C. Frictional processes increase the internal energy of the sandpaper.
The heat produced while using sandpaper on rusted metal. The sandpaper's internal energy is increased by frictional processes, which is Option C in the answer choices.
This occurs because the abrasive action between the sandpaper and the rusty metal creates friction, which in turn generates heat.
The heat created when sanding corroded metal with paper. Frictional processes lead to an increase in the sandpaper's internal energy, which is Option C in the list of possible answers.
This happens as a result of friction caused by the abrasive action of the sandpaper on the rusted metal, which in turn produces heat.
To know more about sandpaper click here:
https://brainly.com/question/14563717
#SPJ11
a 5kw electrical heater is turned on for 10 mins to heat up the air inside a sealed, insulated and rigid container from 300 k to 400 k. what is the electrical heating efficiency?
If a 5kw electrical heater is turned on for 10 mins to heat up the air inside a sealed, insulated, and rigid container from 300 k to 400 k. The electrical heating efficiency is 3.
The electrical heating efficiency can be calculated using the formula:
Efficiency = (Heat output / Heat input) x 100%
Heat output can be calculated using the specific heat capacity of air and the mass of air inside the container:
Heat output = mass x specific heat capacity x (final temperature - initial temperature)
Assuming the mass of air inside the container is 1 kg and the specific heat capacity of air is 1.005 kJ/kg K, we can calculate the heat output as follows:
Heat output = 1 kg x 1.005 kJ/kg K x (400 K - 300 K)
Heat output = 100.5 kJ
Heat input can be calculated using the power and time of the electrical heater:
Heat input = power x time
Assuming the power of the electrical heater is 5 kW and the time it is turned on is 10 minutes (or 0.167 hours), we can calculate the heat input as follows:
Heat input = 5 kW x 0.167 hours
Heat input = 0.835 kWh or 3006 kJ
Now we can plug these values into the efficiency formula to get:
Efficiency = (100.5 kJ / 3006 kJ) x 100%
Efficiency = 3.34%
You can learn more about specific heat capacity at: brainly.com/question/29766819
#SPJ11
Two initially uncharged conductors 1 and 2 are mounted on insulating stands and are in contact as shown above. A negatively charged rod is brought near but does not touch them. With the rod held in place conductor 2 is moved to the right by pushing its stand so that the conductors are separated. Which of the following is now true of conductor 2?
A. It is uncharged.
B. It is positively charged.
C. It is negatively charged.
D. It is charged but its sign cannot be predicted.
E. It is at the same potential that it was before the charged rod was brought near.
It is also important to note that conductor 2 will now be at a different potential than it was before the charged rod was brought near. It is at the same potential that it was before the charged rod was brought near. Option E
When the negatively charged rod is brought near the initially uncharged conductors 1 and 2, the conductors will experience a redistribution of charges due to induction. The negative charges on the rod will repel the electrons in the conductors, causing them to move away from the rod and towards the opposite end of the conductors.
When conductor 2 is moved to the right by pushing its stand, it becomes electrically isolated from conductor 1. This means that the excess negative charges that were induced on conductor 2 by the negatively charged rod will remain on it, and there will be no further redistribution of charges between the conductors. Therefore, the correct answer is C. Conductor 2 is negatively charged.
It is important to note that the magnitude of the charge on conductor 2 cannot be determined without additional information. However, we do know that it has a negative charge due to the induction caused by the negatively charged rod. Additionally, we can conclude that conductor 1 is positively charged since it has lost electrons to conductor 2 during the induction process.
Finally, it is also important to note that conductor 2 will now be at a different potential than it was before the charged rod was brought near. Option E is correct.
For more such questions on conductor visit:
https://brainly.com/question/492289
#SPJ11
A runner's velocity is -10m/s. What can be said about her direction of travel?
If a runner's velocity is -10 m/s, it means that the runner is moving in the opposite direction of the positive reference point. In this case, her direction of travel can be said to be negative or moving in the opposite direction from the positive reference point.
Based on the given information, it can be said that the runner is moving in a negative direction. The negative sign indicates that the velocity is in the opposite direction of the positive direction, which is usually the assumed direction of travel. In this case, the runner is moving in the opposite direction of the assumed direction, which is toward the starting point or the initial position.
Learn more about velocity here:
https://brainly.com/question/24445340
#SPJ11
T/F Positive work occurs when the force and displacement are in the same direction
Positive work occurs when the force and displacement are in the same direction, True
Positive work is defined as the product of the force and the component of the displacement that is in the same direction as the force. In other words, if the force and displacement are in the same direction, the work done by the force is positive.
This means that the force is adding energy to the system, increasing its kinetic or potential energy. On the other hand, if the force and displacement are in opposite directions, the work done by the force is negative, which means that the force is removing energy from the system, decreasing its kinetic or potential energy.
Learn more about potential energy.
https://brainly.com/question/24284560
#SPJ4
When two point charges are a distance d apart, the electric force that each one feels from the other has magnitude F. In order to make this force twice as strong, the distance would have to be changed to
A) √2d
B) d/√2
C) d/4
D) 2d
E) d/2
In order to make this force twice as strong, the distance would have to be changed to r' =√(1/2)r. Hence option B is correct.
The force of attraction between two charges are given by coulomb's law.
the law states that the force of attraction or repulsion between two point charges is directly proportional to product of magnitude of both the charge and inversely proportional to square of the distance between them.
i.e. F ∝ q₁q₂
F ∝ 1/r²
F ∝ q₁q₂/r²
F = kq₁q₂/r²
where k is proportionality constant k = 1/4π∈₀
In this problem
if r = √(1/2) r
F ∝ 1/r²
F ∝ 2/r²
then F = 2F
Hence in order to make force twice the distance must be √(1/2)
Hence option B is correct.
To know more about force :
https://brainly.com/question/26115859
#SPJ4.
As a copper wire is heated, its length increases by 0.100%. What is the change of the temperature of the wire? (aCu = 16.6 × 10-6/C°) Question 4 options:
120.4°C
60.2°C
30.1°C
6.0°C
4.5°C
The change in temperature of the wire is 60.2°C. The correct answer is (b) 60.2°C.
To solve this problem, we can use the following formula:
ΔL = αLΔT
where ΔL is the change in length of the wire, α is the coefficient of linear expansion for copper, L is the original length of the wire, and ΔT is the change in temperature.
We are given that ΔL/L = 0.100% = 0.001, α = 16.6 × [tex]10^{-6[/tex]/C°, and we want to find ΔT. Plugging in these values, we get:
0.001 = (16.6 × [tex]10^{-6[/tex]/C°) × L × ΔT
Solving for ΔT, we get:
ΔT = 0.001/[(16.6 × [tex]10^{-6[/tex]/C°) × L]
We don't have the length of the wire, but we can simplify the equation by using the fact that ΔT is proportional to 1/L. This means that if we double the length of the wire, the change in temperature will be halved, and vice versa.
Assuming that the length of the wire is 1 meter (for convenience), we get:
ΔT = 0.001/[(16.6 × [tex]10^{-6[/tex]/C°) × 1 m] = 60.2°C
Therefore, the change in temperature of the wire is 60.2°C. The correct answer is (b) 60.2°C.
Learn more about linear expansion :
https://brainly.com/question/14780533
#SPJ11
if the starting rtt variation is 500msec, what is the final value of the timeout interval (in msec)?
The final value of the timeout interval (in msec) can be found by the formula RTO = SRTT + 4 * RTT_dev.
To calculate the final value of the timeout interval (in msec) when the starting RTT variation is 500 msec, we need to consider the terms:
RTT (Round-Trip Time), RTO (Retransmission Timeout), and the constants K and G.
Step 1: Calculate the weighted RTT variation (SRTT) using the formula:
SRTT = (1 - K) * SRTT + K * RTT_variation
Assuming K = 0.125, we have:
SRTT = (1 - 0.125) * SRTT + 0.125 * 500
Step 2: Calculate the weighted RTT deviation (RTT_dev) using the formula:
RTT_dev = (1 - G) * RTT_dev + G * |SRTT - RTT_variation|
Assuming G = 0.25, we have:
RTT_dev = (1 - 0.25) * RTT_dev + 0.25 * |SRTT - 500|
Step 3: Calculate the final value of the timeout interval (RTO) using the formula:
RTO = SRTT + 4 * RTT_dev
As we don't have the initial values of SRTT and RTT_dev, we can't provide a specific numeric answer. However, you can use these formulas and plug in the initial values to calculate the final value of the timeout interval (in msec).
Learn more about interval:
https://brainly.com/question/1503051
#SPJ11
Two notes with frequencies of 66 and 70 Hz are sounded together. The resulting beat frequency is
By deducting the higher frequency (70 Hz) from the lower frequency (66 Hz), the beat frequency, which is 4 Hz, can be computed.
When two notes with slightly different frequencies are sounded together, they create a beat frequency, which is the difference between the two frequencies. In this case, the beat frequency can be calculated by subtracting the lower frequency (66 Hz) from the higher frequency (70 Hz), which results in a beat frequency of 4 Hz.
This means that the two notes are interfering with each other, creating four beats per second.
These beats are audible and can be heard as a pulsating sound, which is the beat frequency. The speed of the beats depends on the difference between the two frequencies, and the closer the frequencies are, the slower the beats will be. This phenomenon is used in tuning musical instruments to achieve perfect harmony and eliminate dissonance.
For more such questions on frequency, click on:
https://brainly.com/question/254161
#SPJ11
The polar coordinates of a point are (5.3 , 32°).What are the point's Cartesian coordinates?
The Cartesian coordinates of the point are approximately (4.5, 2.8).
To find the Cartesian coordinates of a point given its polar coordinates, we use the following formulas:
x = r cosθ
y = r sinθ
Where r is the distance from the origin to the point and θ is the angle that the line connecting the point and the origin makes with the positive x-axis.
In this case, the polar coordinates of the point are (5.3, 32°). This means that the distance from the origin to the point is 5.3 and the angle that the line connecting the point and the origin makes with the positive x-axis is 32°.
Using the formulas above, we can find the Cartesian coordinates of the point:
x = 5.3 cos(32°) ≈ 4.5
y = 5.3 sin(32°) ≈ 2.8
Therefore, the Cartesian coordinates of the point are approximately (4.5, 2.8).
Learn more about "cartesian coordinates": https://brainly.com/question/30637894
#SPJ11
what is the average density of a neutron star that has the same mass as the sun but a radius of only 20.0
The volume of a sphere is 33.51 × 10¹² m³ . The average density of the neutron star with the given mass and radius is approximately 5.94 × 10¹⁷ kg/m³.
To calculate the average density of a neutron star with the given mass and radius is:
Average density = Mass / Volume.
1 km = 1000 m
So, the radius of the neutron star in meters is:
20.0 × 1000 = 20,000 m.
The volume of a sphere is given by the formula:
Volume = (4/3) × π × r³
Volume = (4/3) × π × (20,000)³
Volume = 33.51 × 10¹² m³
Now we can calculate the average density:
Average density = Mass / Volume.
Average density = (1.989 × 10³⁰) / (33.51 × 10₁₂ ).
Average density = 5.94 × 10¹⁷
Therefore, the average density of the neutron star with the given mass and radius is approximately 5.94 × 10¹⁷ kg/m³.
To know more about average density:
https://brainly.com/question/31806850
#SPJ12
The complete question is:
what is the average density of a neutron star that has the same mass as the sun but a radius of only 20.0 km?
a crane lifts a piano that weighs 3,240 n in the air 10m in 60 seconds. how much power does the crane have?
The crane has a power of 540 watts when it lifts the 3,240 N piano 10 meters in 60 seconds.
To calculate the power of the crane, we need to use the formula:
Power = Work / Time
The work done by the crane is equal to the force it applies multiplied by the distance it lifts the piano, which is:
Work = Force x Distance
Work = 3,240 N x 10 m
Work = 32,400 Joules
The time it takes for the crane to lift the piano is given as 60 seconds.
Now we can substitute these values into the formula for power:
Power = Work / Time
Power = 32,400 J / 60 s
Power = 540 watts
The 3,240 N piano is lifted 10 metres in 60 seconds by the crane, which has a power of 540 watts.
Learn more about "power": https://brainly.com/question/29575208
#SPJ11
Fifteen years ago, a quasar was observed that was found to be located 12 billion light years away: If our universe is approximately 15 billion years old, when did the quasar emit the light that we observe? A. 3 billion years ago B: 12 billion years ago C. 15 billion years ago D.15 years ago'
The light was produced by the quasar 12 billion years ago, just as the universe was beginning to develop. The correct response is B: 12 billion years ago because the observation was made 15 years ago.
Why or why not is it feasible to observe a galaxy 20 billion light-years away?We are only able to observe objects that are up to 46.1 billion light-years away because of the expanding cosmos. There will always be constraints on the objects we can observe and the objects we might be able to access, regardless matter how much time passes.
27 light years away from Earth, what?Earth is 27 light years away from the star Vega.
To know more about light visit:
https://brainly.com/question/15200315
#SPJ1
