how many moles of a salute are needed to prepare 300 mL of 0.8 mm and NACL solution​

A potential problem associated with travel to another planet is : the extended time for humans to be in space.

It is highly likely that humans will travel to another planet, and Mars is currently considered the most viable option for human exploration. However, there are many potential problems associated with this endeavor, and one of the major issues is the extended time that humans would need to spend in space.

Traveling to Mars would take several months, and once there, astronauts would need to spend significant amount of time on planet before returning to Earth. This means that they would be exposed to high levels of radiation and would need to find ways to survive in harsh and unforgiving environment.

To know more about planets, refer

https://brainly.com/question/28430876

#SPJ1

Answer:

3.566 mol

Explanation:

Since 60.05 is grams divided by mol to cancel out the grams to get only mols it must be divided by 16.84 g

[tex]\frac{60.05 g}{mol} *\frac{1 }{16.84g} =3.566[/tex] mols acetic acid

Answer:its b

Explanation:

jusut bcss

The specific heat capacity of the ring, given that the ring gives up 667.5 J of energy to the water is 0.444 J/gºC. The ring is made of nickel.

The specific heat capacity of the ring can be obtain as illustrated below:

Q = MCΔT

-667.5 = 25.5 × C × -59

-667.5 = -1504.5 × C

Divide both sides by -1504.5

C = -667.5 / -1504.5

C = 0.444 J/gºC

Thus, the specific heat capacity of the ring is 0.444 J/gºC. Hence, the ring is made of nickel

Learn more about specific heat capacity:

https://brainly.com/question/19104255

#SPJ1

If in a reaction between vinegar and antacid tablets, the antacid is the limiting reagent. cm of gas. At constant pressure and temperature, three tablets produce 600 cm³ . The  volume that four tablets will produce is: C. 800 cm³.

Since the antacid is the limiting reagent, the amount of gas produced will be directly proportional to the number of tablets used.

We know that three tablets produced 600 cm³ of gas. Therefore, we can set up a proportion:

3 tablets produce 600 cm³ of gas

4 tablets produce x cm³ of gas

To solve for x, we can use cross-multiplication:

3 tablets × x cm³ of gas = 4 tablets × 600 cm³ of gas

3x = 2400

x = 800 cm³

Therefore the answer is C. 800 cm³.

Learn more about volume here:https://brainly.com/question/463363

#SPJ1

The rate of appearance of NOBr at the given time is 9.80 × [tex]10^-^4[/tex] M/s which is the second option as the question asks to determine the rate of appearance of NOBr, which is a product of the given chemical reaction, at the given time when the rate of disappearance of Br₂ is known. 

For every 1 mole of Br₂ that disappears, 2 moles of NOBr appear. Thus, we can set up a proportion:

(2 mol NOBr / 1 mol Br₂) = (rate of appearance of NOBr / rate of disappearance of Br₂)

Substituting the given values,

(2 mol NOBr / 1 mol Br₂) = (rate of appearance of NOBr / 4.90 x  [tex]10^-^4[/tex] M/s)

Solving for the rate of appearance of NOBr,

rate of appearance of NOBr = (2 mol NOBr / 1 mol Br₂) x (4.90 x  [tex]10^-^4[/tex] M/s) = 9.80 ×  [tex]10^-^4[/tex]M/s

The rate of appearance of NOBr at the given time is 9.80 × [tex]10^-^4[/tex] M/s.

Learn more about the rate of reaction here.

https://brainly.com/question/28027767

#SPJ1

Answer:

39.21 psi

Explanation:

According to Dalton's Law, the total pressure in the system is the sum of all the partial pressures, so all you need to do is add the partial pressures :)

The rate constant, k = 5.27 E-2 s⁻¹, determines the rate law for the reaction P → E + Z.

The rate of the reaction P → E + Z can be expressed as:

Rate = - d[P]/dt = d[E]/dt = d[Z]/dt

where d[P], d[E], and d[Z] = changes in the concentrations of P, E, and Z, respectively, over a small time interval dt.

Use the experimental data to determine the rate constant and the order of the reaction.

Calculate the initial rate of the reaction in each trial by dividing the change in concentration of P by the time interval:

rate1 = (d[P]/dt)1 = (0.30 M - 0 M)/(20 s) = 0.015 M/s

rate2 = (d[P]/dt)2 = (0.60 M - 0.30 M)/(20 s) = 0.015 M/s

rate3 = (d[P]/dt)3 = (0.90 M - 0.60 M)/(20 s) = 0.015 M/s

The initial rates are the same in all three trials, which suggests that the reaction is first-order with respect to P.

Now using any of the three trials to determine the value of the rate constant k, trial 1:

Rate1 = k[P]1

k = Rate1/[P]1 = (1.58 E-2 M/s)/(0.30 M) = 5.27 E-2 s⁻¹

Therefore, the rate law for the reaction P → E + Z is:

Rate = k[P]

where k = 5.27 E-2 s⁻¹ is the rate constant.

Use the rate law to calculate the expected rates of the reaction at different concentrations of P. For example:

Rate2 = k[P]2 = (5.27 E-2 s⁻¹)(0.60 M) = 3.16 E-2 M/s

Rate3 = k[P]3 = (5.27 E-2 s⁻¹)(0.90 M) = 4.74 E-2 M/s

These expected rates are close to the experimental rates, which suggests that the rate law is a good approximation for the reaction under these conditions.

Find out more on reaction rate here: https://brainly.com/question/30769790

#SPJ1

The chemical formula for the ionic compound barium iodide is [tex]BaI_2[/tex] .

Barium iodide is composed of one barium ion (Ba2+) and two iodide ions (I-), which together form a neutral compound. Barium iodide is a white crystalline solid with a high melting point and is soluble in water. It is commonly used in the manufacture of photographic paper and in the production of cathode ray tubes for televisions and computer monitors.

Barium iodide has a variety of other uses, including in medicine as a contrast agent for X-ray imaging and in the synthesis of organic compounds.

The compound has several different crystal structures, including hexagonal and cubic, and can be prepared by reacting barium carbonate with hydroiodic acid. Overall, barium iodide is an important and versatile compound with a range of practical applications.

For more such questions on ionic compound, click on:

https://brainly.com/question/2687188

#SPJ11

A sunscreen made with Benzophenone-5 ([tex]C_1_4H_1_1NaO_6S[/tex]) would be expected to be more waterproof than benzophenone-3 ([tex]C_1_4H_1_2O_3[/tex]).

This is due to the presence of a sodium salt group (Na) and a sulfonic acid group ([tex]SO_3H[/tex] ) in benzophenone-5, which makes it more polar than benzophenone-3. Polar molecules interact more strongly with water molecules and are less likely to dissolve in nonpolar solvents such as oils.

Because sunscreen is designed to be water-resistant, the more polar benzophenone-5 should have stronger interactions with water and give more water resistance than benzophenone-3.

Moreover, the sulfonic acid group in benzophenone-5 may allow it to make stronger hydrogen bonds with water, increasing its water resistance even further.

For more such questions on sunscreen, click on:

https://brainly.com/question/24621986

#SPJ11

The molar equilibrium concentration of Cu² ⁺ is [tex]3.3 x 10^-26[/tex]M when 0.100 mol NH₃ is added to 1.00 L of 0.800 M with Kf = [tex]2.1 x 10^13[/tex].

The issue includes computing the molar balance convergence of Cu² ⁺ in an answer that has 0.100 mol NH3 added to 1.00 L of 0.800 M [Cu(NH₃)₄]²⁺ . To tackle the issue, we can involve the balance consistent articulation for the arrangement of[Cu(NH₃)₄]²⁺:

Kf =[Cu(NH₃)₄]²⁺/(Cu² ⁺)(NH₃)₄

Since the volume of the arrangement doesn't change when NH₃ is added, the underlying grouping of [Cu(NH₃)₄]²⁺ is as yet 0.800 M, while the underlying convergences of Cu² ⁺ and NH₃ are zero. Let x be the molar centralization of Cu² ⁺ at balance, and (0.100 - 4x) be the molar grouping of NH₃ at harmony. Then, we can compose the harmony consistent articulation as:

[tex]2.1 x 10^13 = (x)(0.800 - x)^4/(0.100 - 4x)^4[/tex]

Settling for x gives the molar balance convergence of Cu² ⁺ as 3.3 x [tex]10^-26[/tex] M. This tiny focus demonstrates that the majority of the copper in the arrangement is as [Cu(NH₃)₄]²⁺ and that the expansion of NH₃ has moved the harmony towards the development of this complex.

To learn more about equilibrium concentration, refer:

https://brainly.com/question/30420154

#SPJ1

As the hour of her new job approached, Emma could feel her excitement peak.

"Peak" is a synonym to "intensify" in this context because it means to reach the highest point or level of something. In the given passage, Emma's excitement is growing stronger and stronger as the time for her volunteer job approaches.

When her excitement "peaks," it means that it has reached the highest point of intensity, just like when something is intensified, it becomes stronger or more intense.

Find out more on intensify at https://brainly.com/question/6709509

#SPJ1

The product that is formed first is product B and the product that will be the major product if given enough time would also be product B.

In an energy diagram, the vertical axis represents the overall energy of the reactants, while the horizontal axis is the ‘reaction coordinate’, tracing from left to right the progress of the reaction from starting compounds to final products.

The activation energy of the reaction can be shown on a diagram as the energy between the reactants that the transition state.

The product with lesser activation energy is the product that is formed first and the major product is decided by the stability of the product which depends on the energy. Lesser is the energy of the product, greater is its stability.

Learn more about Reaction energy diagram, here:

https://brainly.com/question/31032112

#SPJ1

Answer:

Atomic number of sodium is 11

Electronic configuration of a sodium atom :

Since sodium has one electron in its outermost shell, Therefore, sodium can easily donate it's one electron. As the result it becomes sodium cation with + 1 charge.

Electronic configuration of a sodium cation,[tex] \: \sf ({Na}^{+1}) [/tex]

In case of sodium cation, it has fully filled electronic configuration.

Cations - Atoms that carry postive charge are called cations. Cations are formed when an atom loses its electron.

For example : [tex]\sf {Na}^{+} [/tex]

Anions - Atoms that carry negative charge are called anions. Anions are formed when an atom gains a electron.

For example : [tex]\sf {Cl}^{-} [/tex]

a. Br  will have the negative charge

b. The effective charges on the I and Br atoms are approximately +1.012e and -1.012e, respectively.

a. To identify which atom within an IBr molecule will have a partial negative charge, we must consider each atom's electronegativity.

On the periodic table, iodine (I) has an electronegativity value of 2.66 while bromine (Br) boasts 2.96; since Br has higher electronegativity it will attract electrons more strongly and hence have an even stronger partial negative charge.

B. To calculate the effective charges on the I and Br atoms in IBr, we can use the dipole moment equation:

μ = Q * d

where μ is the dipole moment, Q is the effective charge, and d is the bond length.

We are given the dipole moment (μ) as 1.21 D, and the bond length (d) as 249 pm. However, we need to convert the units to the SI system before proceeding with the calculation.

[tex]1 D (Debye) = 3.336 * 10^-^3^0 cm,\\\\1 pm = 10^-^1^2 m.[/tex]

Now we can solve for the effective charge (Q):[tex]u = 1.21 D * (3.336 × 10^-^3^0 Cm/D)\\ \\= 4.03656 * 10^-^3^0 cm\\d = 249 pm * (10^-12 m/pm) = 2.49 * 10^-^1^0 m[/tex]

Q = μ / d

[tex]Q = (4.03656 * 10^-^3^0 cm) / (2.49 *10^-^1^0 m) \\\\\\=1.62151 * 10^-^2^0 C[/tex]

This effective charge represents the charge difference between the I and Br atoms. To express the charges in units of the elementary charge (e), we need to divide the effective charge by the elementary charge value (e = 1.602 × 10^-19 C):

Q_e =[tex]\frac{(1.62151 * 10^-^2^0 C)}{(1.602 * 10^-^1^9 C)} = 1.012[/tex]

The effective charges on the I and Br atoms are approximately +1.012e and -1.012e, respectively.

Read more on effective charges here: https://brainly.com/question/30459409

#SPJ1

Answer:

solution resists changes in pH

Explanation:

the inherent property of buffers is to resist change to ph even when acids and bases are added. when the base is added, it is quickly neutralized by the conjugate acid, so the ph won't change.

Answer:

B: The solutions resists changes in pH.

Explanation:

Buffer reactions maintain stable pH of solutions.

The height of fall of the ice is determined as 313.25 m.

The total heat energy of the ice during the fall is calculated as follows;

Q = ml + mcΔT

where;

Q = 334000 x 0.4  +  0.4 x 4200 x (10)

Q = 150,400 J

The energy converted into potential energy is calculated as;

3%K.E = 150,400 J

0.03K.E = 150,400 J

K.E = 5,013,333.33 J

¹/₂mv² = 5,013,333.33 J

v = √(2 x 5,013,333.33)/(0.4)

v = 5,006.67 m/s

The height of fall is calculated as;

h = √2gh

h = √(2 x 5,006.67 x 9.8)

h = 313.25 m

Learn more about heat energy here: https://brainly.com/question/7541718

#SPJ1

The identity of element X in the compound X2Fe(CN)6 · 12H2O is sodium (Na).

To find the identity of element X in the compound X2Fe(CN)6 · 12H2O, we can start by determining the molar mass of the compound.

The molar mass of X2Fe(CN)6 is:

2 × molar mass of X + molar mass of Fe + 6 × molar mass of C + 6 × molar mass of N

= 2 × atomic mass of X + atomic mass of Fe + 6 × 12.01 g/mol + 6 × 14.01 g/mol

= 2 × atomic mass of X + 55.85 g/mol + 432.72 g/mol + 84.06 g/mol

= 2 × atomic mass of X + 572.63 g/mol

The molar mass of 12H2O is:

12 × (atomic mass of H + atomic mass of O) = 12 × (1.01 g/mol + 16.00 g/mol) = 216.24 g/mol

The total molar mass of the compound is:

2 × atomic mass of X + 572.63 g/mol + 216.24 g/mol = 2 × atomic mass of X + 788.87 g/mol

Now we can use the given information that the compound is 45.34% water by mass. This means that the mass of water in the compound is 45.34% of the total mass of the compound, and the mass of the rest of the compound (X2Fe(CN)6) is 100% - 45.34% = 54.66% of the total mass of the compound.

Let's assume we have 100 g of the compound. Then the mass of water in the compound is:

45.34 g water = 0.4534 × 100 g compound

The mass of the rest of the compound (X2Fe(CN)6) is:

54.66 g rest of the compound = 0.5466 × 100 g compound

We can now use the mass of the rest of the compound (X2Fe(CN)6) to find the number of moles of the compound:

moles of X2Fe(CN)6 = (54.66 g) / (2 × atomic mass of X + 572.63 g/mol)

We can also use the mass of water to find the number of moles of water:

moles of H2O = (45.34 g) / 18.02 g/mol

Since the compound has 12 moles of water per mole of X2Fe(CN)6, we have:

moles of X2Fe(CN)6 = 1/12 × moles of H2O

We can now set these two expressions for moles of the compound equal to each other and solve for the atomic mass of X:

(54.66 g) / (2 × atomic mass of X + 572.63 g/mol) = 1/12 × (45.34 g) / 18.02 g/mol

Simplifying this equation and solving for the atomic mass of X gives:

atomic mass of X = 22.99 g/mol

The atomic mass of X is very close to the atomic mass of sodium (22.99 g/mol), so it is likely that X is sodium. Therefore, the identity of element X in the compound X2Fe(CN)6 · 12H2O is sodium (Na).

learn more about molar mass  here

https://brainly.com/question/837939

#SPJ1

Chemical reactions nearly always include a change in energy between the products and reactants.

Thus, Energy is released when chemical bonds are created and is released when chemical bonds are destroyed.

The overall energy of a system, however, must remain constant according to the Law of Conservation of Energy, and chemical reactions frequently absorb or release energy in the form of heat, light, or both.

The difference in the amounts of chemical energy that are stored in the products and reactants accounts for the energy change in a chemical reaction. Enthalpy refers to the system's heat content or stored chemical energy.

Thus, Chemical reactions nearly always include a change in energy between the products and reactants.

Learn more about Chemical reaction, refer to the link:

https://brainly.com/question/29039149

#SPJ1

PbS, sometimes referred to as galena, is made up of lead (Pb) and sulfur (S) atoms and has a straightforward structure. Each lead atom forms a tetrahedral link with four sulfur atoms, while each sulfur atom forms a covalent bond with two lead atoms.

Each sulfur atom forms an octahedral link with six iron atoms, while each iron atom forms a covalent bond with two sulfur atoms. FeS2's crystal structure is a cubic, tightly packed lattice.

Learn more about chemical formula:https://brainly.com/question/31713710

#SPJ1

At equivalence point, the reaction is seen to consume approximately 0.0024973 moles of KHP and then 0.0024973 moles of  NaOH

The primary aim in this problem is to standardize a solution of the sodium hydroxide, NaOH, with the aid of potassium hydrogen phthalate, KHP.

The beginning point in this problem is the balanced chemical equation with respect to this neutralization reaction

KHP (aq] + NaOH(aq] → KNaP(aq] + H₂O(l]

The important thing that we are going to observe is that there is a ratio of 1:1 mole ratio between the two reactants. This suggests to us that the equivalence point can be attained by getting equal number of moles of  KHP and of NaOH to react with each other.

We will begin with 0.5100 g of KHP. To obtain the molar amount of acid utilized for the experiment, we will make use of its molar mass of 0.5100g⋅

molar mass of KHP

1 mole KHP 204.22g = 0.0024973 moles KHP

Thus, at equivalence point, the reaction is seen to consume approximately 0.0024973 moles of KHP and then 0.0024973 moles of  NaOH, due to the fact that it's what the  1:1 mole ratio suggests to us.

Read more about Mole Ratio at: https://brainly.com/question/30632038

#SPJ1

The volume of O2 that can be released at STP from the given sample of silver oxide is 23.45 mL.

Creating the balanced chemical equation for the breakdown of silver oxide is the first step in tackling this issue:

2Ag2O(s) → 4Ag(s) + O2(g)

We can deduce from the equation that 2 moles of AgO will result in 1 mole of O2. Since Ag2O has a molar mass of 231.735 g/mol, 0.4856 g of Ag2O is equivalent to:

0.4856 g Ag2O x (1 mol Ag2O/231.735 g Ag2O) = 0.002095 mol Ag2O

Therefore, the number of moles of O2 that can be produced from 0.4856 g of Ag2O is:

0.002095 mol Ag2O x (1 mol O2/2 mol Ag2O) = 0.0010475 mol O2

1 mole of any gas takes up 22.4 L of space at STP As a result, 0.4856 g of Ag2O can generate the following amount of O2 at STP:

0.0010475 mol O2 x 22.4 L/mol = 0.02345 L or 23.45 mL

Therefore, the volume of O2 that can be released at STP from the given sample of silver oxide is 23.45 mL.

Learn more about chemical equation here: brainly.com/question/11904811

#SPJ1

The mass of sodium sulfate [tex](Na_2SO_4)[/tex] formed by the complete reaction of 137.3 grams of sodium hydroxide [tex](NaOH)[/tex] is 486.74 grams.

The balanced chemical equation for the reaction between sodium hydroxide [tex](NaOH)[/tex] and sulfuric acid [tex](H_2SO_4)[/tex] is:

[tex]NaOH[/tex] + [tex](H_2SO_4)[/tex] → [tex]Na_2SO_4[/tex] + [tex]2H_2O[/tex]

From the balanced equation, we can see that 1 mole of [tex]NaOH[/tex] reacts with 1 mole of [tex](H_2SO_4)[/tex] to produce 1 mole of [tex]Na_2SO_4[/tex] and 2 moles of water [tex](H_2O).[/tex]

The molar mass of [tex]NaOH[/tex] is 40.00 g/mol, which means that 137.3 grams of [tex]NaOH[/tex] is equal to 137.3 g / 40.00 g/mol = 3.4325 moles of [tex]NaOH[/tex].

Since 1 mole of [tex]NaOH[/tex] reacts with 1 mole of [tex](H_2SO_4)[/tex] to produce 1 mole of [tex](Na_2SO_4)[/tex] , we can say that 3.4325 moles of [tex]NaOH[/tex] will react with 3.4325 moles of [tex]H_2SO_4[/tex] to produce 3.4325 moles of [tex]Na_2SO_4[/tex].

The molar mass of [tex](Na_2SO_4)[/tex] is 142.04 g/mol, which means that 1 mole of [tex](Na_2SO_4)[/tex] has a mass of 142.04 g.

Therefore, 3.4325 moles of [tex](Na_2SO_4)[/tex] has a mass of 3.4325 moles x 142.04 g/mol = 486.74 grams.

For more such questions on reaction, click on:

https://brainly.com/question/29470602

#SPJ11

The Gibbs free energy change for the given reaction at 25°C and the given concentrations is -25.5 kJ/mol

The Gibbs free energy change (∆G) of a reaction can be calculated using the equation:

∆G = -RT ln(K)

Where R is the gas constant (8.314 J/molK), T is the temperature in Kelvin, and K is the equilibrium constant.

The equilibrium constant (K) can be calculated from the acid dissociation constant (Ka) as:

K = [C] ÷ ([A] × [B])

Substituting the given values, we get:

K = (5.00 x 10⁻⁵) ÷ (1.50 x 1.00) = 3.33 x 10⁻⁵

Therefore,

∆G = - (8.314 J/molK) × (298 K) × ln(3.33 x 10⁻⁵)

= 25.5 kJ/mol

To learn more about Gibbs follow the link:

https://brainly.com/question/13318988

#SPJ1

The surface area of the rectangular prism is 0.034 square meters.

For a rectangular prism with length l, width w, and height h, the surface area is:

Surface area = 2lw + 2lh + 2wh

Substituting the given values, we get:

Surface area = 2(10 cm x 5 cm) + 2(10 cm x 8 cm) + 2(5 cm x 8 cm)

Surface area = 100 cm² + 160 cm² + 80 cm² = 340 cm²

We can use dimensional analysis. So the conversion factor is:

1 m² / 10,000 cm²

Multiplying the surface area by this conversion factor, we get:

Surface area = 340 cm² x (1 m² / 10,000 cm²)

Surface area = 0.034 m²

To know more about rectangular prism, here

brainly.com/question/21308574

#SPJ1

--The complete Question is, What is the surface area of a rectangular prism that has a length of 10 cm, a width of 5 cm, and a height of 8 cm? Use dimensional analysis to convert the answer to square meters--

Answer:

The answer is 966.67 mm of Hg.

Explanation:

To solve this problem, we can use Boyle's Law which states that the pressure of a gas is inversely proportional to its volume when the temperature and the amount of gas are kept constant. The formula for Boyle's Law is:

P1V1 = P2V2

where P1 is the initial pressure, V1 is the initial volume, P2 is the final pressure, and V2 is the final volume.

Using the given values:

P1 = 580 mmHg

V1 = 500 cm³

V2 = 300 cm³

We can solve for P2:

P1V1 = P2V2

580 mmHg x 500 cm³ = P2 x 300 cm³

290,000 mmHg·cm³ = P2 x 300 cm³

P2 = 290,000 mmHg·cm³ / 300 cm³

P2 = 966.67 mmHg (rounded to the nearest hundredth)

Therefore, the pressure when the volume is reduced to 300 cm³ is approximately 966.67 mmHg.

The molarity of the solution that has 2.0 moles of solute in 3.0 L of solution is 0.67 mol/L

Molarity is  described as a measure of the concentration of a chemical species, in particular of a solute in a solution, in terms of amount of substance per unit volume of solution.

Molarity = moles of solute / liters of solution

we then substitute the given values, and have

Molarity = 2.0 moles / 3.0 L

Molarity = 0.67 mol/L

Molarity is  very important because the ration used to express the concentration of  any  solution.

Learn more about molarity at:

https://brainly.com/question/30404105

#SPJ1

The equation that represents a balanced reaction involving 14 atoms of oxygen is:

2C2H6 + 7O2 --> 4CO2 + 6H2O

a. The relationship between variables in this equation is that 2 moles of C2H6 (ethane) react with 7 moles of O2 (oxygen) to produce 4 moles of CO2 (carbon dioxide) and 6 moles of H2O (water). This equation follows the law of conservation of mass, where the total number of atoms on both sides of the equation is the same, indicating a balanced reaction.

b. The graph is linear, as the coefficients of the reactants and products in the equation are whole numbers and form a consistent ratio. The coefficients of 2, 7, 4, and 6 represent the stoichiometry of the reaction, indicating a fixed relationship between the reactants and products.

c. An example of a situation where this balanced equation could be applicable is the combustion of ethane (C2H6) in the presence of excess oxygen (O2) to produce carbon dioxide (CO2) and water (H2O), which is a common reaction in the combustion of hydrocarbon fuels. The equation represents the balanced stoichiometry of this reaction, where 2 moles of ethane react with 7 moles of oxygen to produce 4 moles of carbon dioxide and 6 moles of water, involving a total of 14 atoms of oxygen in the reaction.

For more questions on: balanced

https://brainly.com/question/31339766

#SPJ11

The volume of C₂H₂ that is collected over water at 23 ∘C by the reaction of 1.52 g of CaC₂ is 0.61 L

First, we shall determine the mole of CaC₂ that reacted. Details below:

Mole = mass / molar mass

Mole of CaC₂ = 1.52 / 64

Mole of CaC₂ = 0.024 mole

Next, we shall determine the mole of C₂H₂. obtained. Details below:

CaC₂ + 2H₂O -> C₂H₂ + Ca(OH)₂

From the balanced equation above,

1 mole of CaC₂ reacted to produced 1 mole of C₂H₂

Therefore,

0.024 mole of CaC₂ will also react to produce 0.024 mole of C₂H₂

Finally, we shall determine the volume of C₂H₂ collected. This is shown below:

PV = nRT

729.93 × V = 0.024 × 62.36 × 296

Divide both sides by 729.93

V = (0.024 × 62.36 × 296) / 729.93

V = 0.61 L

Thus, the volume of the C₂H₂ gas collected is 0.61 L

Learn more about volume:

https://brainly.com/question/21838343

#SPJ1