Answer:
E. Gain of electrons
Explanation:
A reduction reaction is one part of the two concurrent reactions that take place in a redox (reduction-oxidation) reaction.
During reduction, an atom gains electrons from a donor atom, and it's oxidation number becomes smaller.
Option A is wrong because reduction does not increase oxidation state nor are neutrons involved
Option B is wrong because reduction is not a nuclear reaction (does not involve the nucleons)
Option C is wrong because reduction leads to reduction in oxidation state
Option D is wrong leads to a reduction in oxidation state when electrons are gained
Option E is correct because reduction involves gain of electrons
Which of these statements gives a correct reason as to why our body needs water?
(1 Point)
1. It provides us with energy.
2. It helps us to eliminate waste.
3. It helps regulate our body temperature.
Answer:
2. It helps us to eliminate waste
3. It helps regulate our body temperature
Explanation:
In addition to the function of bringing nutrients to the cells, water provides the elimination of substances out of the body. This occurs, for example, through urine, which is basically formed by water and toxic or excess substances dissolved.
Water also helps in regulating body temperature. This occurs when the heat becomes exaggerated, sweat is released, which has water in its composition. When in contact with the medium, the sweat evaporates on the surface of the skin, causing the body to cool.
How do forces between particles in liquids compare to forces in tho other states of matter?
Answer:I hope it will be beneficial for you
Force of attraction between the particles of solid is very strong the particles of solid are held together by strong inter molecular forces leading to the formation of a rigid structure
Force of attraction between the particles of the liquid is weak as compare to solids there particles are far away from each other and have the property to move easily.
Force of attraction between the particles of gases is very weak than the two states hence the particles of gases are highly compressible having week intermolecular interaction between them and have indefinite shape and volume
Answer:
Forces between particles in Liquids are closely packed compared to other states of matter like the liquid and gaseous state of matter.
Explanation:
ions always have the same electronic structure as elements in which group of the periodic table?
Answer:
In 0 group of the periodic table
Explanation:
So they will not react with other atoms because they have a full outer shell of electrons and an overall charge of 0.
Hope it helps.
if 196L of air at 1 atm is compressed to 2600mL,what is the new temperature?
Answer:
Around 3.62 degrees kelvin
Explanation:
Assuming this is at STP:
The first step is to convert 2600mL to liters. There are 1000 milliliters in a liter, meaning that this is equal to 2.6L.
Now:
[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}\\\\\\\dfrac{196(1)}{273}=\dfrac{2.6(1)}{T_2} \\\\\\T_2\approx 3.62K[/tex]
Hope this helps!
what is the color of benzene and bromine
Explanation:
Benzene is colorless, with a sweet odour.
Color of Bromine is reddish brown .
Hope this helps.
Which of the following aqueous solutions are good buffer systems? . 0.24 M hydrochloric acid + 0.23 M sodium chloride 0.28 M ammonia + 0.35 M ammonium nitrate 0.16 M barium hydroxide + 0.28 M barium bromide 0.15 M nitrous acid + 0.14 M potassium nitrite 0.35 M calcium nitrate + 0.21 M calcium iodide
Answer: 0.28 M ammonia + 0.35 M ammonium nitrate and 0.15 M nitrous acid + 0.14 M potassium nitrite
Explanation:
Buffer solution is the solution which resists the change in the magnitude of the pH when small additions of either acid or base is added.
Acidic Buffer solutions consist of weak acid and its conjugate base usually mixed in relatively equal and large quantities.
Basic Buffer solutions consist of weak base and its conjugate acid usually mixed in relatively equal and large quantities.
Thus 0.28 M ammonia + 0.35 M ammonium nitrate ( weak base + conjugate acid) and 0.15 M nitrous acid + 0.14 M potassium nitrite (weak acid + conjugate base) are good buffer systems
The aqueous solutions that are good buffer systems are:
0.28 M ammonia + 0.35 M ammonium nitrate. 0.15 M nitrous acid + 0.14 M potassium nitrite.We want to determine which of the given solutions would make a good buffer.
What is a buffer?A buffer is a solution used to resist abrupt changes in pH when an acid or a base is added.
What kinds of buffers exist?Acidic buffer: formed by a weak acid and its conjugate base.Basic buffer: formed by a weak base and its conjugate acid.Which of the following aqueous solutions are good buffer systems?
0.24 M hydrochloric acid + 0.23 M sodium chloride. No, since HCl is a strong acid.0.28 M ammonia + 0.35 M ammonium nitrate. Yes, it would be a good basic buffer.0.16 M barium hydroxide + 0.28 M barium bromide. No, since Ba(OH)₂ is a strong base. 0.15 M nitrous acid + 0.14 M potassium nitrite. Yes, it would be a good acidic buffer.0.35 M calcium nitrate + 0.21 M calcium iodide. No, since no acids nor bases are present.The aqueous solutions that are good buffer systems are:
0.28 M ammonia + 0.35 M ammonium nitrate. 0.15 M nitrous acid + 0.14 M potassium nitrite.Learn more about buffers here: brainly.com/question/24188850
Light travels three-fourths as fast through water as it does through a vacuum.
What is water's index of refraction?
What is a good title for this chart?
Answer:
pH of the acid
Explanation:
Smooth muscle myosin is a motor protein that plays a crucial role in the contraction of smooth muscle. If this protein has a molar mass of 480,000 grams/mol, what is the mass, in grams, of 27 moles of smooth muscle myosin
Answer: Thus the mass, in grams, of 27 moles of smooth muscle myosin is 12960000 grams
Explanation:
According to avogadro's law, 1 mole of every substance weighs equal to the molecular mass, occupies 22.4 L at STP contains avogadro's number [tex](6.023\times 10^{23})[/tex] of particles.
Molecular mass of protein = 480,000 g/mol
Thus 1 mole of protein weighs = 480,000 g
So 27 moles of protein weighs = [tex]\frac{480,000}{1}\times 27=12960000g[/tex]
Thus the mass, in grams, of 27 moles of smooth muscle myosin is 12960000 grams
Use bond energies to calculate ΔHrxn Δ H r x n for the reaction. 2H2(g)+O2(g)→2H2O(g) 2 H 2 ( g ) + O 2 ( g ) → 2 H 2 O ( g )
Answer:
[tex]\large \boxed{\text{-486 kJ}}[/tex]
Explanation:
You calculate the energy required to break all the bonds in the reactants.
Then you subtract the energy needed to break all the bonds in the products.
2H₂ + O₂ ⟶ 2H-O-H
Bonds: 2H-H 1O=O 4H-O
D/kJ·mol⁻¹: 436 498 464
[tex]\begin{array}{rcl}\Delta H & = & \sum{mD_{\text{reactants}}} - \sum{nD_{\text{products}}}\\& = & 2 \times 436 +1 \times 498 - 4 \times 464\\&=& 1370 - 1856\\&=&\textbf{-486 kJ}\\\end{array}\\\text{The enthalpy of reaction is $\large \boxed{\textbf{-486 kJ}}$}.[/tex]
Le Chatelier's Principle. For the reaction below, if the equilibrium concentrations were NH3 = 2 x 10-4, H3O+ = 2 x 10-4M and NH4+ = 18.0M, what is the equilibrium constant for the reaction and what would happen if you were to add some acid to this reaction? NH3 + H3O+ --> NH4+ + H2O
Answer:
Explanation:
NH3 + H3O+ --> NH4+ + H2O
equllibrium constant =K = [ H2O] [NH4+] / [NH3] [H3O+ ]
=
by inserting thier respecive values can you calcaulte, by the way coniseder [ H2O] =1 ,
10. How many grams of NH, are present in 6 moles
of NH,?
Answer:
90.08784 grams
Explanation:
idk
Why don't we discuss the results during the results section of the project?
Answer: The result section of the project contains your findings while carrying out your research or study.
Explanation:
The Results section of a research or study usually contains only the findings of your study or research.The findings which usually include
1. Data presented in tables, charts, graphs, and other figures.
2. A contextual analysis of this data explaining its meanings. Usually in sentences.
Our result gotten is not discussed in result section because every project or research work has a discussion page where every results or findings are discussed. The result section is expected to carry what you found.
Which is true regarding a water molecule?
Answer:
Has many answers, but one is that it consists of small polar v shaped molecules with a molecular formula H20.
Explanation:
Water molecules consists of 2 hydrogen atoms bonded with on oxygen atom. Each molecule is electrically neutral but polar, with the center of positive and negative charges located in different places.
Each hydrogen atom has a nucleus consisting of a single positively-charged proton surrounded by a 'cloud' of a single negatively-charged electron and the oxygen atom has a nucleus consisting of eight positively-charged protons and eight uncharged neutrons surrounded by a 'cloud' of eight negatively-charged electrons.
Hoped this helped!
Indicate whether the following represents a Chemical or Physical change: Gasoline burns in air
Answer:
Chemical
Explanation:
Whenever "burns" is being used, most of the time it is a chemical change
Answer:
chemical change
Explanation:
it's a chemical change because when gas burn it produces water and carbon dioxide
calculate the moles of 25.2 g Na2S2O8
Answer:
To calculate the moles we must first find the molar mass M
M (Na2S2O8) = (23*2) + (32*2) + (16*8)
= 46 + 64 + 168
= 278g/mol
Molar mass = mass/moles
moles =mass / molar mass
= 25.2/278
= 0.0906mol
Hope this helps.
The reaction of hydrogen bromide(g) with chlorine(g) to form hydrogen chloride(g) and bromine(g) proceeds as follows: 2HBr(g) + Cl2(g)2HCl(g) + Br2(g) When 23.9 g HBr(g) reacts with sufficient Cl2(g), 12.0 kJ is evolved. Calculate the value of rH for the chemical equation given.
Answer:
The enthalpy of reaction per mole of HBr for this reaction = ΔrH = -40.62 kJ/mole.
Explanation:
2HBr(g) + Cl2(g) → 2HCl(g) + Br2(g)
When 23.9 g HBr(g) reacts with sufficient Cl2(g), 12.0 kJ of heat is evolved, calculate the value of ΔrH for the chemical reaction.
Note that ΔrH is the enthalpy per mole for the reaction.
Molar mass of HBr (g) = 80.91 g/mol.
Hence, 1 mole of HBr = 80.91 g
23.9 g of HBr led to the reaction giving off 12.0 kJ of heat
80.91 g of HBr will lead to the evolution of (80.91 × 12/23.9) = 40.62 kJ heat is given off.
Hence, 40.62 kJ of heat is given off per 80.91 g of HBr.
This directly translates to that 40.62 kJ of heat is given off per 1 mole of HBr
Hence, the heat given off per mole of HBr for this reaction is 40.62 kJ/mole.
But since the reaction liberates heat, it means the reaction is exothermic and the enthalpy change for the reaction (ΔHrxn) is negative.
Hence, ΔrH = -40.62 kJ/mole.
Hope this Helps!!!
The boiling point of ethanol is 78.40°C. A student conducts an
experiment and finds a boiling point of 75.70°C. How far off
from the accepted value was the student's result?
Error = °C
Answer:
2.7 °C
Explanation:
78.4-75.7=2.7
The student's result is 2.7° C less than the expected result.
We have a student conducting an experiment to find the boiling point of ethanol.
We have to determine how far off from the accepted value is the student's result.
What is Measurement error ?Measurement Error (also called Observational Error) is the difference between a measured quantity and its true value.
According to the question, we have -
True value of the boiling point of ethanol [T] = 78.40°C.
Measured value of the boiling point of ethanol [M] = 75.70°C.
The Error (E) in the measurement will be -
E = T - M
E = 78.40° - 75.70° = 2.7° C
Hence, the student's result is 2.7° C less than the expected result.
To solve more questions on Errors in measurements, visit the link below-
https://brainly.com/question/16199575
#SPJ2
If a jet’s cruising altitude is 32,200ft(to three significant figures),the distance in km is :(1 mile=1.61km;1 mile=5280 ft)
Answer:
9.82 km.
Explanation:
Hello,
In this case, given the conversion factors from miles to kilometres and from miles to feet, we can directly compute the jet’s cruising altitude in kilometres as shown below:
[tex]32,200ft\times \frac{1mile}{5280ft}\times \frac{1.61km}{1mile} \\\\=9.82km[/tex]
Best regards.
Which process absorbs the greatest amount of heat?
a. the cooling of 10 g of liquid water from 100°C to 0°C.
b. the heating of 10 g of liquid water from 0°C to 100°C.
c. the freezing of 10 g of liquid water the melting of 10 g of ice.
d. the condensation of 10 g of gaseous water.
Answer:
b. the heating of 10 g of liquid water from 0°C to 100°C.
Explanation:
Hello,
In this case, we must notice a., c. and d. processes are not actually absorbing heat but releasing it since cooling, freezing and condensation are processes with negative heat sign since matter changes from a state of more energy to a state of less energy. We can prove this by realizing that freezing enthalpy of water is -6.00 kJ/mol, condensation enthalpy of eater is -40.8 kJ/mol and a change of temperature from 100 °C to 0 °C is negative.
In such a way, the only process absorbing heat is b. the heating of 10 g of liquid water from 0°C to 100°C since energy must be added to the system, or absorbed by it in order to attain the heating.
Regards.
The process having the greatest amount of heat is:
b. the heating of 10 g of liquid water from 0°C to 100°C.
Looking at all the options:The options a., c. and d. processes are not actually absorbing heat but releasing it since cooling, freezing and condensation are processes with negative heat sign since matter changes from a state of more energy to a state of less energy.
The freezing enthalpy of water is -6.00 kJ/mol, condensation enthalpy of eater is -40.8 kJ/mol and a change of temperature from 100 °C to 0 °C is negative.
So out of all the options, only process at b is a heating process thus it will absorb greatest amount of heat.
Find more information about Heat here:
brainly.com/question/13439286
A student takes a measured volume of 3.00 M HCl to prepare a 50.0 mL sample of 1.80 M HCI. What volume of 3.00 M HCI
did the student use to make the sample?
Use M,V;-MV
3.70 mL
16.7 ml
30.0 mL
83.3 mL
Mark this and return
Save and Exit
Next
Submit
Answer:
30 mL VOLUME OF 3.0 M HCl SHOULD BE USED BY THE STUDENT TO MAKE A 1.80 M IN 50 mL OF HCl.
Explanation:
M1 = 3.00 M
M2 = 1.80 M
V2 = 50 .0 mL = 50 /1000 L = 0.05 L
V1 = unknown
In solving this question, we know that number of moles of a solution is equal to the molar concentration multiplied by the volume. To compare two samples, we equate both number of moles and substitute for the required component.
So we use the equation:
M1 V1 = M2 V2
V1 = M2 V2 / M1
V2 = 1.80 * 0.05 / 3.0
V2 = 0.09 /3.0
V2 = 0.03 L or 30 mL
To prepare the sample of 1.80 M HCl in 50.0 mL from a 3.0 M HCl, 30 mL volume should be used.
Answer:
C on edg 2021Explanation:
i dont like reading
Suppose that while you're in the lab performing a simple distillation you encountered one of the following errors: The components within the mixture, isopropanol and dichloromethane, distilled well below their boiling point. Poor separation between isopropanol and dichloromethane was observed. The initial volume of the distillation mixture has decreased significantly, almost dry, but no distillate was collected.
Answer:
Isopropanol and dichloromethane, distilled well below their boiling point.
Explanation:
The best way to separate isopropanol and dichloromethane is the method of fractional distillation. In this method, different compounds separate from each other due to difference in boiling. The boiling point of dichloromethane is 39.6 degree Celsius which is lower than the boiling point of isopropanol which is 82.5 degree Celsius. So dichloromethane will be evaporated when the temperature reaches to 40 degree Celsius and separated from isopropanol before reaching its boiling point.
4-Methylphenol, CH3C6H4OH (pKa 10.26), is only slightly soluble in water, but its sodium salt, CH3C6H4O-Na , is quite soluble in water. Describe the solubility of 4-methylphenol in solutions of sodium hydroxide, sodium bicarbonate (NaHCO3), and sodium carbonate (Na2CO3). The pKa values for the conjugate acids of sodium hydroxide, sodium bicarbonate (NaHCO3), and sodium carbonate (Na2CO3) are 15.7, 6.36, and 10.33, respectively.
Explanation:
We know that more is the [tex]pK_{a}[/tex] value, weaker will be the acid. Also, an acid completely dissociates into ions in an aqueous base solution when [tex]pK_{a}[/tex] of conjugate acid of base is greater than acid.
4-methylphenol [tex](CH_{3}C_{6}H_{4}OH)[/tex] ([tex]pK_{a} = 10.26[/tex]) is quite soluble in its sodium salt. In NaOH, the dissociation will be as [tex]Na^{+}[/tex] and [tex]OH^{-}[/tex] ions as NaOH is a strong base.
Therefore, 4-methylphenol will readily dissolve in NaOH solution.
As, [tex]NaHCO_{3}[/tex] is not a strong base but as 4-Methylphenol forms a sodium salt hence, it will have a low solubility as compared to NaOH.
Whereas [tex]Na_{2}CO_{3}[/tex] is not a base but when dissolved in water it shows basic character as it produces NaOH (strong base) and [tex]H_{2}CO_{3}[/tex] (weak acid). As a result, the solution gets basic. Hence, 4-methylphenol will readily dissolve in [tex]Na_{2}CO_{3}[/tex].
4.The reaction of 0.25 g magnesium with 100.0 mL of 2 M hydrochloric acid (density d = 1.039 g/ml) raises the temperature of the solution from 20.0 °C to 35.0 °C. The specific heat for HCl is 3.98 J/(g.C). Mg(s) + 2HCl(aq) —> MgCl2(aq) + H2(g) Calculate the heat of the reaction. (Use the equation Q = s . m .ΔT where s is the specific heat, m is the mass of solution and ΔT is the change in temperature)
Answer:
[tex]Q=450.14J[/tex]
Explanation:
Hello,
In this case, for the given equation to compute the heat, we should compute the mass of the solution of hydrochloric acid, thus, the first step is to compute its reacting mass:
[tex]m_{HCl}^{reacting}=2\frac{mol}{L}*0.1000L *\frac{36.45g}{1mol}=7.29g[/tex]
Then, we obtain the total mass of the formed solution:
[tex]m=0.25g+7.29g=7.54g[/tex]
In such a way, we can infer that the specific heat of the solution is mainly the specific heat of hydrochloric acid, therefore the heat turns out:
[tex]Q=3.98\frac{J}{g\°C} *7.54g*(35.0\°C-20.0\°C)\\\\Q=450.14J[/tex]
Regards.
A base has a molarity of 1.5 M with respect to the hydroxyl ion (OH-) concentration. If 7.35 cm³ of this base is taken and diluted to 147 cm³, then what is the concentration of the hydroxyl ion. How many moles of hydroxyl ion are there in the 7.35 cm³? In the 147 cm³?
Answer:
0.077M is the concentration of the hydroxyl ion
Explanation:
If 7.35 cm3 of this base is take and diluted to 147 cm3, then what is the concentration of the hydroxyl ion?
Use the dilution equation:
M1V1 = M2V2
M1 * 147cm³ = 1.5 M * 7.35 cm³
M1 = 1.5 M * 7.35 cm³ / 147 cm³
M1 = 0.077 M
0.077M is the concentration of the hydroxyl ionHow many moles of hydroxyl ion are there in the 7.35 cm3?
1000 cm³ contains 1.5 mol OH- ions
7.35 cm³ contains : 7.35 cm³ / 1000 cm³ *1.5 mol
= 0.011025 mol
Answer correct to 2 significant digits = 0.011 mol OH- ions.Solids in which the atoms have no particular order or pattern are called what solids
Answer:
Amorphous solids .
Explanation:
They have no particular order or pattern.Each particle is in a particular spot, but the particles are in no organized pattern.
If g(x) is the inverse of f(x) and f(x)=4x+12, what is g(x)?
Answer: [tex]y = \frac{1}{4}x-3[/tex]
Explanation:
To find the inverse of an equation, follow these steps:
Replace every f(x) or y with x, and every x with y. Solve the equation for yWe are given the equation [tex]f(x) = 4x + 12[/tex] , so replace f(x) with x.
Then, replace x with y.
Your new equation:
[tex]x = 4y + 12[/tex]
Now, solve for y:
[tex]x = 4y + 12\\\\4y = x - 12\\\\y = \frac{1}{4}x-3[/tex]
This equation is the inverse of f(x), or g(x).
A growing concern in agricultural and food chemistry is the presence of residues in food. We use many forms of organic chemicals in agriculture and food chemistry and there is growing concern as to how safe these materials are. Choose an organic chemical used in agricultural of food chemistry and report on the functional groups contained in your compound, the uses of the compound, and the safety of that compound.
Answer:
Monosodium Glutamate (MSG) is a chemical which is used in agricultural of food chemistry.
Explanation:
Monosodium Glutamate (MSG) is a chemical that is used in types of different food as food additives. The functional group that is present in Glutamate are carboxylic acid and amine. This chemical is used in different types of foods which is responsible for enhancing the taste of the food. Monosodium Glutamate is safe if it is used in moderate dose but adversely affected when it is used in large amount.
Use the formation reactions below such that when added together, they match the balanced equation for the combustion of methane.
Cgraphite(s)+ 2H2(g) → CH4(g) ΔH 1=−74.80kJ
Cgraphite(s)+ O2(g) → CO2(g) ΔH2=−393.5k
H2(g)+ 1/2O2(g) → H2O(g) ΔH3=−241.80kJ
Calculate ΔHrxn for the combustion of methane, CH4(g).
CH4(g)+ 2O2(g) → CO2(g)+ 2H2O(g) ΔHrxn =--------------kJ
Answer:
ΔH of the reaction is -802.3kJ.
Explanation:
Using Hess's law, you can know ΔH of reaction by the sum of ΔH's of half-reactions.
Using the reactions:
(1) Cgraphite(s)+ 2H₂(g) → CH₄(g) ΔH₁ = −74.80kJ
(2) Cgraphite(s)+ O₂(g) → CO₂(g) ΔH₂ = −393.5k J
(3) H₂(g) + 1/2 O₂(g) → H₂O(g) ΔH₃ = −241.80kJ
The sum of (2) - (1) produce:
CH₄(g) + O₂(g) → CO₂(g) + 2H₂(g) ΔH' = -393.5kJ - (-74.80kJ) = -318.7kJ
And the sum of this reaction with 2×(3) produce:
CH₄(g) + 2 O₂(g) → CO₂(g) + 2H₂O(g) And ΔH = -318.7kJ + 2×(-241.80kJ) =
-802.3kJ
A vegetable soup recipe requires one teaspoonful of salt. A chef accidentally puts in one tablespoonful. Now the soup is much too salty.
a) What can the chef do to reduce the salty taste of the soup?
b) What effects would your suggestion in a) have on the soup?
Answer:
a. Put a piece of fresh sliced yam with a bore into it into the soup.
Explanation:
b. Osmosis may occur
The chef can put a slice of yam in the soup with a hole in it as it will absorb excess of salt by process of diffusion.
What is diffusion?
Diffusion is defined as the process of movement of molecules which takes place under concentration gradient. It helps in movement of substances in and out from the cell.The molecules move from lower concentration region to a higher concentration region till the concentration becomes equal.
There are 2 main types of diffusion:
1) simple diffusion-process in which substances move through a semi-permeable membrane without the aid of transport proteins.
2) facilitated diffusion- It is a passive movement of molecules across cell membrane from higher concentration region to lower concentration.
There are 2 types of facilitated diffusion one is osmosis and dialysis.
Learn more about diffusion,here:
https://brainly.com/question/14852229
#SPJ2
