four equal charges of +3microcolumb are placed at the four corners of a square that is 40cm on a side. Find the force on any one of the charge.​

Answer:

Interact with it

Explanation:

The body in a condensed form (often a dot or a box)

Straight arrows pointing in the direction in which forces act on the body are represented.

Moments are portrayed by curved arrows pointing in the direction in which they impact the body.

A coordinate system is a series of coordinates.

Explanation:

Distance travelled (d) = 56 metres

Time taken (t) = 7 seconds

velocity of the object (V)

= d / t

= 56 / 7

= 8 m/s

The velocity of the object is 8 m/s.

Hope it will help :)

Answer:

[tex]H=\frac{V^2}{R}[/tex]

Explanation:

Let H be  heat produced per sec

Time, t=1 sec

Resistance of resistor=R ohm

We have to write down the expression for the  heat produced per second in a resistor in terms of potential difference and resistance​.

We know that

Heat, [tex]H=I^2 Rt=\frac{V^2}{R}t[/tex]

Substitute the value

Then, we get

Heat,[tex]H=\frac{V^2}{R}\times 1[/tex]

[tex]H=\frac{V^2}{R}[/tex]

This is required expression for the heat produced per second in a resistor  in terms of potential difference and resistance​.

Answer:Orbits are the result of a perfect balance between the forward motion of a body in space, such as a planet or moon, and the pull of gravity on it from another body in space, such as a large planet or star. An object with a lot of mass goes forward and wants to keep going forward; however, the gravity of another body in space pulls it in.

Explanation:

Answer:

a. The friction force acting on the truck's tires during the turn, is approximately 20,875 N

b. The maximum velocity with which the truck could make the bend is approximately 31.654 m/s

Explanation:

The given parameters of the truck are;

The mass of the truck, m = 2.5 × 10³ kg

The tire material = Rubber

The radius of the turn the through which the truck moves = 120 meters

The material and condition of the surface = Dry asphalt

a. The coefficient of friction of rubber tires on dry asphalt, μ ≈ 0.85 (researchgate (internet source))

The weight of the truck, W = m × g

Where;

m = The mass of the truck = 2.5 × 10³ kg

g = The acceleration due to gravity = 9.8 m/s²

∴ W = 2.5 × 10³ kg × 9.8 m/s² = 24,500 N

The force of friction acting on the tires, [tex]F_f[/tex] = W × μ

∴ [tex]F_f[/tex] = 24,500 N × 0.85 ≈ 20,875 N

The friction force acting on the truck's tires during the turn, [tex]F_f[/tex] ≈ 20,875 N

b. The centrifugal force the truck observes while turning through the bend, 'F', is given as follows;

F = m·v²/r

Therefore, the maximum velocity with which the truck could make the bend, 'v', is given when fiction force, '[tex]F_f[/tex]', is equal to the centripetal force, F

When [tex]F_f[/tex] = F, we have;

W × μ = m·v²/r

∴ 20,875 N = 2.5 × 10³ kg × v²/(120 m)

∴ v² = 20,875 N × (120 m)/(2.5 × 10^3 kg) = 1002 m²/s²

v = √(1002 m²/s²) ≈ 31.654 m/s

The maximum velocity with which the truck could make the bend, v ≈ 31.654 m/s

According to this question;

QUESTION 1:

Where;

QUESTION 2:

Learn more about force of friction at: https://brainly.com/question/4230804?referrer=searchResults

Answer:

the initial kinetic energy of the basket ball is 4.8 J

Explanation:

The computation of the initial kinetic energy of the basket ball is shown below:

As we know that

Initial kinetic energy is

[tex]= \frac{1}{2}mv^2 \\\\= \frac{1}{2}\times 0.6 \times (4m/s)^2\\\\= \frac{1}{2}\times 0.6 \times 16m/s^2\\\\= 4.8 J[/tex]

Hence, the initial kinetic energy of the basket ball is 4.8 J

Answer:

49,000 Pa

49 kPa

Explanation:

P (pressure)= hρg, where h= height, ρ=density, and g= acceleration due to gravity.

50 m * 1000kg/m³ * 9.8 m/s²

=49,000 kg*m⁻¹s⁻² OR 49,000 Pa OR 49 kPa

Answer:

The density pf each piece will be the same, since density is defined as a mass per unit volume, so even when you cut an object it will not change

Answer:

a chicken

a chicken came first

Answer:

A Chicken

A chicken came first

Answer:

Upward direction.

The friction is kinetic friction

Answer:

Given =

Current = 3 A

Resistance = 5 ohm

Solution =

By Ohm's Law

R = V/I

V = R x I

V = 5 x 3

V = 15 volts. Answer

Answer:

The Answer is A

Explanation:

Answer:

when object is kept at focus then image will form at infinity

Explanation:

virtual erect highly diminished image will be formed and it is used in the lense in galilean telescope

Answer:

A driver breaks suddenly and the passengers are flung forward

Answer:

1.F = 256 N

2.a = 8 m/s/s

By looking at the given information, you know force, and an acceleration. Therefore you have enough information to use the first formula.

F = ma

256 N = m * 8 m/s/s

m = 256 N/8 m/s/s

m = 32 Kg

Answer:

the wind

Explanation:

Answer:

The depth of the object below the surface of the liquid is 0.510 meters.

Explanation:

The hydrostatic pressure ([tex]P[/tex]), measured in pascals, experimented by the object is directly proportional to density of the fluid ([tex]\rho[/tex]), measured in kilograms per cubic meter, gravitational acceleration ([tex]g[/tex]), measured in meters per square second, and depth of the object ([tex]h[/tex]), measured in meters. That is:

[tex]P = \rho\cdot g \cdot h[/tex] (1)

If we know that [tex]P = 4500\,Pa[/tex], [tex]\rho = 900\,\frac{kg}{m^{3}}[/tex] and [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], then the depth of the object is:

[tex]h = \frac{P}{\rho\cdot g}[/tex]

[tex]h = \frac{4500\,Pa}{\left(900\,\frac{kg}{m^{3}} \right)\cdot \left(9.807\,\frac{m}{s^{2}} \right)}[/tex]

[tex]h = 0.510\,m[/tex]

The depth of the object below the surface of the liquid is 0.510 meters.

The depth of the object below the liquid's surface will be

"0.510 m".

According to the question,

Object immersed, P = 4500 Pa

Density of liquid, ρ = 900 kg/m³

Acceleration due to gravity, g = 9.8 m/s²

We know the relation,

→ Hydrostatic pressure (P) = ρ.g.h

or,

Depth will be:

→ h = [tex]\frac{P}{\rho .g}[/tex]

By substituting the values,

     = [tex]\frac{4500}{900\times 9.8}[/tex]

     = [tex]\frac{4500}{8820}[/tex]

     = 0.510 m

Thus the above answer is appropriate.  

Find out more information about pressure here:

https://brainly.com/question/1831566

Answer:

Distance

Explanation:

trust me

Answer:

The distance "r" must be squared

Explanation:

In the equation F=GMm/r^2, the distance "r" is squared, which represents the distance between masses M and m and G is the gravitational constant.

Answer:hence, the force needed to accelerate the 1000kg car by 3m/s2 is 3000N

Explanation:

plz mark as brainlyist plz

Answer:

1350N

Explanation:

Given data

mass= 75kg

velocity= 6m/s

distance= 2m

The expression for the applied force is given as

F= mv^2/d

Substitute

F= 75*(6)^2/ 2

F= 75*36/2

F= 2700/2

F= 1350N

Hence the force is 1350N

Answer:

A) amps using an ammeter.....

Answer:

The linear momentum of a particle with mass m moving with velocity v is defined as

p = mv (7.1)

Linear momentum is a vector . When giving the linear momentum of a particle you must

specify its magnitude and direction. We can see from the definition that its units must be

kg·m

s

. Oddly enough, this combination of SI units does not have a commonly–used named so

we leave it as kg·m

s

!

The momentum of a particle is related to the net force on that particle in a simple way;

since the mass of a particle remains constant, if we take the time derivative of a particle’s

momentum we find

dp

dt = m

dv

dt = ma = Fnet

so that

Fnet =

dp

dt (7.2)

Answer:

B

Explanation:

Answer:

a in high frequency waves

Explanation:

because of the thermal radiation from the sun

Answer:

The answer is B, "In low frequency-waves"

Explanation:

I got this right on my lesson! Have a great day! (-;