To determine the formula of the hydrated salt, we need to first find the empirical formula by determining the smallest whole number ratio of the elements present in the compound.
Then, we can use the molar mass of the empirical formula and the percentage composition of the water to find the molecular formula.
Step 1: Find the empirical formula
Assuming 100 g of the compound, we can calculate the masses of each element present:
- Iron: 20.14 g
- Oxygen: 23.02 g
- Sulphur: 11.51 g
- Water: 45.32 g
Next, we need to convert these masses to moles:
- Iron: 20.14 g / 55.85 g/mol = 0.360 mol
- Oxygen: 23.02 g / 16.00 g/mol = 1.439 mol
- Sulphur: 11.51 g / 32.06 g/mol = 0.359 mol
- Water: 45.32 g / 18.02 g/mol = 2.515 mol
We can then divide each mole value by the smallest mole value to get the mole ratio:
- Iron: 0.360 mol / 0.359 mol ≈ 1
- Oxygen: 1.439 mol / 0.359 mol ≈ 4
- Sulphur: 0.359 mol / 0.359 mol = 1
- Water: 2.515 mol / 0.359 mol ≈ 7
The mole ratio is approximately 1:4:1:7, which gives us the empirical formula:
FeSO4·7H2O
Step 2: Find the molecular formula
The empirical formula mass of FeSO4·7H2O is:
(55.85 + 32.06 + 4(16.00)) + 7(18.02) = 278.00 g/mol
We know from the problem that the molecular mass of the salt is 278 g/mol, so the empirical formula is also the molecular formula. Therefore, the formula of the hydrated salt is FeSO4·7H2O.
To know more about empirical refer here
https://brainly.com/question/977538#
#SPJ11
Unit 6 Critical Thinking Questions! (HELP) - 30 POINTS
1. Compare and contrast positive and negative feedback loops of the endocrine system. Provide a specific example of each, including which gland is responsible for the hormone related to that loop.
2. What is the difference between endocrine and exocrine glands in terms of both form and function? Why is one type not considered part of the endocrine system?
3. Describe the cascade of events that occurs when blood glucose levels decline, including which organ and cells respond, which hormones are released, and how the process helps maintain homeostasis. Your answer should cover all three ways glucose is re-introduced to the body. What is the ultimate use of the glucose created in this process?
4. Why can both type I and type II diabetes, untreated, result in impaired vision or blindness as someone ages? How does type II diabetes turn into type I diabetes as someone ages?
5. Imagine you have a patient who has come to you and is exhibiting symptoms such as fatigue and increased thirst and urination. What would you check for to determine whether the patient has Cushing’s, type I diabetes, or type II diabetes?
1. Positive feedback loops amplify or increase changes, while negative feedback loops counteract or reduce changes.
2. The main difference between endocrine and exocrine glands is that endocrine glands secrete hormones directly into the bloodstream, while exocrine glands secrete substances through ducts.
3. When blood glucose levels decline, the pancreas' alpha cells release glucagon, which signals the liver to break down glycogen into glucose, promotes gluconeogenesis, and releases glucose into the bloodstream.
4. Both type I and type II diabetes can result in impaired vision or blindness due to high blood sugar damaging blood vessels in the retina.
5. To determine if a patient has Cushing's, type I diabetes, or type II diabetes, check for cortisol levels (Cushing's), insulin levels, and blood sugar levels (diabetes).
1. An example of a positive feedback loop is oxytocin release during childbirth from the posterior pituitary gland. An example of a negative feedback loop is the regulation of thyroid hormones by the thyroid gland, where a decrease in hormone levels triggers the release of more hormones.
2. Endocrine glands are part of the endocrine system, while exocrine glands are not, due to their use of ducts for secretion.
3. The ultimate use of this glucose is to provide energy for the body.
4. Type II diabetes doesn't turn into type I diabetes as they are distinct conditions.
5. Additional tests may include glucose tolerance and autoimmune marker tests.
To know more about endocrine glands click on below link:
https://brainly.com/question/9194966#
#SPJ11
1. -
Averigua la molaridad de una disolución que contiene 58,8 gramos de yoduro de calcio (CaI2) , por litro
The molarity of the solution comes out to be 0.200 M, which is calculated in the below section.
The number of moles of calcium iodide can be calculated as follows-
n = m / M ......(1)
Molar mass (M) of Calcium iodide = 293.887 g/mol
Mass (m) = 58.8 grams
Substitute the known values in equation (1) as follows-
n = 58.8 grams / 293.887 g/mol
= 0.200 moles
Now, the molarity can be calculated using the below formula-
Molarity = no. of moles / Volume
= 0.200 moles / 1 L
= 0.200 M
To learn more about molarity check the link below-
https://brainly.com/question/30404105
#SPJ4
Complete question-
Find the molarity of a solution that contains 58.8 grams of calcium iodide (CaI2), per liter.
Ammonia reacts with oxygen to yield nitrogen and water.
4NH3(g) + 3O2(g) → 2N2(g) + 6H₂O(l)
Given this chemical equation, as well as the number of moles of the reactant or product
below, determine the number of moles of all remaining reactants and products.
3.0 mol O2
1.0 mol N₂
The number of mole of the remaining reactants and products are
Mole of NH₃ = 4 molesMole of H₂O = 6 molesHow do i determine the mole of reactant and product?We must recognize that reactants are located on the left side of a chemical equation while the products are located on the right side.
With the above information in mind, we shall determine the mole of the reactants and products. This is illustrated below:
4NH₃(g) + 3O₂(g) → 2N₂(g) + 6H₂O(l)
Reactants:
Mole of NH₃ = 4 molesMole of O₂ = 3 molesProducts
Mole of N₂ = 2 molesMole of H₂O = 6 molesThus, the moles of the remaining reactants and products are:
Mole of NH₃ = 4 molesMole of H₂O = 6 molesLearn more about mole:
https://brainly.com/question/18265914
#SPJ1
At which point does a planet move most slowly in its orbit , at aphelion or perihelion
At aphelion, when the planet is farthest from the Sun, its velocity is the slowest in its orbit. Conversely, at perihelion, the point in the orbit where the planet is closest to the Sun, the planet moves fastest.
A planet moves most slowly in its orbit at aphelion. Aphelion refers to the point in a planet's orbit where it is farthest from the Sun.
As a planet orbits the Sun, it experiences gravitational attraction, causing it to accelerate as it gets closer to the Sun and decelerate as it moves away.
Aphelion refers to the point in an object's orbit around the Sun where it is farthest from the Sun. It is the point in an object's elliptical orbit where the distance between the object and the Sun is at its maximum.
To learn more about aphelion, follow the link:
https://brainly.com/question/30583998
#SPJ12
1. )There are Blank 1 grams in one mole of KI. Please round atomic masses to the nearest whole number.
2. )There are Blank 1 grams in one mole of ZnCl2. Please round atomic masses to the nearest whole number.
3. )The molar mass of P2O5 is Blank 1 grams per mole. Please round atomic masses to the nearest whole number.
4. )The molar mass of barium cyanide is Blank 1 grams per mole. Please round atomic masses to the nearest whole number.
5. )The molar mass of nickel (I) chromate is Blank 1 grams per mole. Please round atomic masses to the nearest whole number
6-hydroxy-3,4-dimethyl-2-heptanone forms a cyclic hemiacetal, which predominates at equilibrium in aqueous solution. how many stereoisomers are possible for 6-hydroxy-3,4-dimethyl-2-heptanone? how many stereoisomers are possible for the hemiacetal?
6-hydroxy-3,4-dimethyl-2-heptanone has four stereoisomers and the cyclic hemiacetal derived from it can exist as two stereoisomers.
6-hydroxy-3,4-dimethyl-2-heptanone has two chiral centers (carbon atoms with four different substituents attached), which gives rise to four possible stereoisomers: two pairs of enantiomers, each pair of which are diastereomers of the other pair.
When 6-hydroxy-3,4-dimethyl-2-heptanone forms a cyclic hemiacetal, it creates another chiral center at the carbon atom that is involved in the formation of the hemiacetal. The hemiacetal can exist as two possible diastereomers, depending on the configuration of the hydroxyl group and the methyl group on the newly formed chiral center. Therefore, there are two possible stereoisomers for the cyclic hemiacetal.
To know more about stereoisomers, here
brainly.com/question/31147524
#SPJ4
If 67. 8 moles of gas was measured out into a helium balloon how many molecules would be present within the balloon
Answer: 4.08 x 10^25 molecules
Explanation:
1 mole of a substance contains 6.022×10^23 molecules/atoms of that substance.
therefore:
67.8 x (6.022x10^23) = 4.08x10^25 molecules of helium
How to find out if a solid, more specifically powdered cement, is acid or alkali?
To determine whether a powdered cement is an acid or an alkali, you can perform a simple pH test using litmus paper or a pH meter.
Acids have a pH value below 7, whereas alkalis have a pH value above 7.
To conduct a pH test using litmus paper, moisten the paper with water, then sprinkle a small amount of the powdered cement onto the paper. The paper will change color based on the pH of the cement. If the paper turns red, the cement is acidic. If it turns blue, the cement is alkaline.
Alternatively, you can use a pH meter to measure the pH of a solution made by mixing a small amount of the powdered cement with water. If the pH is less than 7, the cement is acidic, and if it is greater than 7, the cement is alkaline.
It is important to note that most types of cement are typically slightly alkaline, with a pH value between 8 and 9.5, due to the presence of calcium oxide and other alkali metal oxides in the cement.
To know more about pH test, refer here:
https://brainly.com/question/29551790#
#SPJ11
The heat of a reaction may be found with the equation q=mcΔT. A 56. 8g sample of aluminum is heated from 79. 5°C to 143. 7°C. The specific heat capacity of aluminum is 0. 900 J/(g*K). Calculate the heat absorbed.
A) 3280J
B) 4440J
C) 6220J
D) 11400J
The heat of a reaction may be found with the equation q=mcΔT. A 56. 8g sample of aluminum is heated from 79. 5°C to 143. 7°C. The specific heat capacity of aluminum is 0. 900 J/(g*K). The heat absorbed is C) 6220J.
The heat absorbed can be calculated using the formula q=mcΔT, where q is the heat absorbed, m is the mass of the sample, c is the specific heat capacity of the substance, and ΔT is the change in temperature.
Substituting the given values, we get:
q = (56.8 g) x (0.900 J/(g*K)) x (143.7°C - 79.5°C)
q = 6220 J
Therefore, the heat absorbed is 6220 J, and the answer is option C. This means that 6220 Joules of energy is required to heat a 56.8 gram sample of aluminum from 79.5°C to 143.7°C, assuming a specific heat capacity of 0.900 J/(g*K).
To know more about the heat of a reaction refer here :
https://brainly.com/question/30464598#
#SPJ11
2Al (s) + 3Cl2 (g) --> 2AlCl3 (s) (balanced)
When 52 grams of chlorine gas react, the actual yield is 42. 5 grams, what is the
percent yield?
The percent yield for the reaction is approximately is 65.12%.
To calculate the percent yield, we need to first find the theoretical yield and then compare it to the actual yield. Here's the solution:
1. Calculate the moles of Cl2:
52 g Cl2 * (1 mol Cl2 / 70.9 g Cl2) = 0.733 mol Cl2
2. Use the stoichiometry of the balanced equation:
(0.733 mol Cl2) * (2 mol AlCl3 / 3 mol Cl2) = 0.489 mol AlCl3
3. Find the theoretical yield:
(0.489 mol AlCl3) * (133.3 g AlCl3 / 1 mol AlCl3) = 65.2 g AlCl3 (theoretical yield)
4. Calculate the percent yield:
(42.5 g AlCl3 (actual yield) / 65.2 g AlCl3 (theoretical yield)) * 100 = 65.12%
The percent yield for the reaction is approximately 65.12%.
Know more about Percent Yield here:
https://brainly.com/question/1704278
#SPJ11
A 100 n force pulls a box horizontally across a floor for 2 m. how much was done by the force of gravity (which pulls straight down on the box)?
a. 50 j
b. 0 j
c. 100 j
d. 200 j
The net work done is 0 J. (B)
The force of gravity only affects the box vertically, not horizontally, so it doesn't do any work in this scenario. Only the applied force of 100 N pulling the box horizontally for 2 m does work.
This work can be calculated using the formula: Work = Force x Distance x Cos(theta), where theta is the angle between the force and the displacement.
In this case, since the force is applied horizontally, theta is 0, so the work done is simply: Work = 100 N x 2 m x Cos(0) = 200 J. Therefore, the correct answer is (b) 0 J for the work done by the force of gravity.(B)
To know more about gravity click on below link:
https://brainly.com/question/14874038#
#SPJ11
An ancient gold medallion absorbs 576 J of energy when it is heated, this causes a temperature change of 25. 0 C. What is the mass of the gold medallion?
The mass of the ancient gold medallion is 360 grams.
To calculate the mass of the gold medallion, we need to use the specific heat capacity of gold, which is 0.129 J/g°C. We also need to know the initial temperature of the medallion.
Let's assume the initial temperature of the gold medallion is 20.0°C (room temperature). The heat absorbed by the gold medallion can be calculated using the following formula:
Q = m * c * ΔT
Substituting the given values, we get:
576 J = m * 0.129 J/g°C * 25.0°C
Solving for m, we get:
m = 360 g
To know more about heat capacity, here
brainly.com/question/29766819
#SPJ4
Shaving cream has gas dispersed throughout the cream. What type of mixture is this?
colloid is the answer
If you start with 29. 25 g of NaOH and 107 g of FeCl3, find the reaction yield and the limiting reactant. Show your work
Starting with 29.25 g of NaOH and 107 g of FeCl₃, the limiting reactant is NaOH with yeild percentage of 60%.
To find the reaction yield and the limiting reactant, starting with 29.25 g of NaOH and 107 g of FeCl₃, you need to perform the following steps:
1. Write the balanced chemical equation:
FeCl₃ + 3NaOH → Fe(OH)₃ + 3NaCl
2. Calculate moles of each reactant:
NaOH: 29.25 g / (23.0 g/mol Na + 15.99 g/mol O + 1.01 g/mol H) ≈ 0.729 moles
FeCl₃: 107 g / (55.85 g/mol Fe + 3 * 35.45 g/mol Cl) ≈ 0.397 moles
3. Identify the limiting reactant:
For every mole of FeCl₃, you need 3 moles of NaOH. Divide moles of each reactant by their coefficients in the balanced equation:
NaOH: 0.729 moles / 3 ≈ 0.243
FeCl₃: 0.397 moles / 1 ≈ 0.397
The smaller value is for NaOH, so it is the limiting reactant.
To know more about limiting reactant click on below link:
https://brainly.com/question/14225536#
#SPJ11
A 100ml sample of 0.40m hydrofluoric acid is mixed with 100ml of 0.40m lithium hydroxide. will the ph of the final solution be less than 7, equal to 7, or greater than 7
The pH of the final solution will be equal to 7.
When 100 mL of 0.40 M hydrofluoric acid (a weak acid) is mixed with 100 mL of 0.40 M lithium hydroxide (a strong base), the reaction can be represented as:
HF + LiOH → LiF + H₂O
As both solutions have equal concentrations and volumes, they will completely neutralize each other. The product, LiF, is a soluble salt and will dissociate into Li+ and F- ions in water.
Since the number of moles of H+ and OH- ions is the same in the reaction, they will react to form water (H₂O), resulting in a neutral solution with a pH of 7. The formation of water from equal amounts of H⁺ and OH⁻ ions indicates that the solution is neither acidic nor basic, thus leading to a pH of 7.
To know more about weak acid click on below link:
https://brainly.com/question/22104949#
#SPJ11
Science Inquiry of Lemon Juice
Scientific Method of Lemon Juice
Integrating Design Thinking in SIP of Lemon Juice
Steps in Conducting SIP of Lemon Juice
Science Inquiry of Lemon Juice:
Science inquiry of lemon juice refers to the process of using scientific methods to investigate the properties, behavior, and chemical composition of lemon juice.What is the Science Inquiry?Scientific Method of Lemon Juice:
The scientific method of lemon juice involves the following steps:
Identify the problem: The first step is to identify the problem to be investigated. For example, one may want to investigate the effect of lemon juice on the pH of water.Formulate a hypothesis: Based on the identified problem, formulate a hypothesis that can be tested through experimentation. For example, the hypothesis could be that adding lemon juice to water will make it more acidic.Design an experiment: Develop an experiment that will test the hypothesis. In the above example, one could add different amounts of lemon juice to different samples of water and measure their pH.Conduct the experiment: Conduct the experiment according to the designed procedure.Collect data: Record the data obtained during the experiment.Analyze the data: Use statistical methods to analyze the data and draw conclusions.Draw conclusions: Based on the data analysis, draw conclusions about the hypothesis.
Integrating Design Thinking in SIP of Lemon Juice:
Design thinking can be integrated into the Science Inquiry Process (SIP) of lemon juice in the following ways:Empathize: Understand the needs and requirements of the end-users of lemon juice, such as chefs, homemakers, and bartenders.Define: Clearly define the problem that the scientific investigation of lemon juice aims to solve.Ideate: Brainstorm multiple ideas for scientific experiments that can test the hypothesis and lead to a solution to the defined problem.Prototype: Create prototypes of the scientific experiments and test them to see if they work as intended.Test: Conduct scientific experiments to test the hypothesis and evaluate the performance of the prototypes.The steps in conducting the Science Inquiry Process (SIP) of lemon juice are as follows:
Choose a topic of interest related to lemon juice, such as its chemical composition, properties, or health benefits.Develop a research question that can be investigated scientifically.Formulate a hypothesis that answers the research question.Design an experiment that tests the hypothesis.Conduct the experiment and collect data.Analyze the data and draw conclusions.Lastly, Communicate the results of the investigation through a scientific report or presentation.
Read more about Science Inquiry here:
https://brainly.com/question/1828853
#SPJ1
For each of the following compounds, decide whether the compound's solubility in aqueous solution changes with pH. If the solubility does change, pick the pH at which you'd expect the highest solubility. You'll find Ksp data in the ALEKS Data tab.
compound Does solubility change with pH? highest solubility pH = 5 | pH = 7. PH | pH = 8
NaBr Васо, OOOOO Сасі, X 5 ? Formula BaCrO4 BaSO4 CaCO3 CaF2 Co(OH)2 CuBr CuCO3 Fe(OH)2 POCO3 PbCr04 PbF2 Mg(OH)2 Ni(OH)2 AgBroz A92CO3 AgCI Ag2 CrO4 SrCO3 ZnCO3 Zn(OH)2 AgBr Aucl Ksp 1. 17x10-10 1. 08x10-10 3. 36x10-9 3. 45x10-11 5. 92x10-15 6. 27x10-9 1. 4x10-10 4. 87x10-17 7. 40x10-14 2. 8x10-13 3. 3x10-8 5. 61x10-12 5. 48x10-16 5. 38x10-5 8. 46x10-12 1. 77x10-10 1. 12x10-12 5. 60x10-10 1. 46x10-10 3. 0x10-17 5. 35x 10-13 1. 77x10-10
The solubility of some compounds does change with pH. Specifically, the solubility of compounds containing hydroxide ions (OH-) or carbonate ions (CO3^2-) will increase as the pH becomes more basic. For example, CaCO3 and Mg(OH)2 will have higher solubility at pH 8 compared to pH 5 or 7.
On the other hand, compounds containing sulfates (SO4^2-) or fluorides (F-) will have minimal pH dependence. For example, BaSO4 and CaF2 will have similar solubility at pH 5, 7, and 8.
For compounds with Ksp values given in the table, the pH at which highest solubility is achieved is dependent on the specific compound. The highest solubility pH for each compound can be determined by examining the specific ion involved and its dependence on pH.
Based on the provided Ksp values, I'll analyze the solubility of some of the compounds at different pH levels:
1. NaBr: Solubility does not change with pH as it's a neutral salt and neither cation nor anion react with water.
2. BaCrO4: Solubility changes with pH. Highest solubility at pH = 7, because the anion (CrO4^2-) can form a precipitate with Ba^2+ at lower pH levels.
3. CaCO3: Solubility changes with pH. Highest solubility at pH = 5, because the anion (CO3^2-) can form a precipitate with Ca^2+ at higher pH levels.
4. CaF2: Solubility does not significantly change with pH as it's a slightly soluble salt, and the anion (F-) does not react with water.
5. Co(OH)2: Solubility changes with pH. Highest solubility at pH = 5, because the compound can form a precipitate at higher pH levels due to increased hydroxide concentration.
Note that due to the format of the provided information, it's not possible to analyze all compounds. However, this methodology can be applied to the remaining compounds based on their Ksp values and potential reactions with water.
To know more about Solubility-pH relation:
https://brainly.com/question/31632429
#SPJ11
Regardless of the electron or hydrogen acceptor used, one of the products of fermentation is always:.
The product of fermentation that is always produced regardless of the electron or hydrogen acceptor used is ethanol (C2H5OH) or lactic acid (C3H6O3) depending on the type of fermentation.
Fermentation is a metabolic process that occurs in the absence of oxygen and involves the breakdown of glucose or other organic compounds by microorganisms.
It is a type of anaerobic respiration, which does not require oxygen as the final electron acceptor. During fermentation, the organic compounds are partially oxidized, and the energy released is used to generate ATP, the energy currency of cells.
Different microorganisms can carry out fermentation using different electron or hydrogen acceptors, such as pyruvate, acetaldehyde, or acetyl-CoA.
However, regardless of the acceptor used, the end products are typically ethanol or lactic acid, along with carbon dioxide and small amounts of other byproducts.
To know more about fermentation refer to-
https://brainly.com/question/31310689
#SPJ11
The surface of a pool table has a perimeter of 26 feet and an area of 40 square feet. What are the dimensions of the pool table?
The dimensions of the pool table with a perimeter of 26 feet and an area of 40 square feet are either 5 feet by 8 feet or 8 feet by 5 feet.
To solve this problem, we need to use some basic geometry formulas. Let's start by using the formula for the perimeter of a rectangle, which is P = 2l + 2w, where l is the length and w is the width.
We know that the perimeter of the pool table is 26 feet, so we can write the equation:
26 = 2l + 2w
Simplifying this equation, we get:
13 = l + w
Next, we can use the formula for the area of a rectangle, which is A = lw, where A is the area.
We know that the area of the pool table is 40 square feet, so we can write the equation:
40 = lw
Now we can use substitution to solve for one of the variables. We can rearrange the perimeter equation to solve for one variable in terms of the other:
l = 13 - w
Then we can substitute this expression for l into the area equation:
40 = (13 - w)w
Expanding this equation, we get:
40 = 13w - w^2
Rearranging and simplifying, we get a quadratic equation:
w^2 - 13w + 40 = 0
We can solve this equation by factoring or using the quadratic formula, which gives us:
w = 5 or w = 8
If w is 5, then l is 8 (using the perimeter equation), and if w is 8, then l is 5. So the dimensions of the pool table are either 5 feet by 8 feet or 8 feet by 5 feet.
In summary, the dimensions of the pool table with a perimeter of 26 feet and an area of 40 square feet are either 5 feet by 8 feet or 8 feet by 5 feet.
To know more about perimeter, visit:
https://brainly.com/question/6465134#
#SPJ11
If you perform this reaction with 5. 00 g of MnO2 and 5. 00 g of H2SO4, how many grams of Mn(SO4)2 will form?
MnO2 + 2H2SO4 → Mn(SO4)2 + 2H2O
Molar Masses
MnO2= 86. 9368 g/mol
H2SO4= 98. 0785 g/mol
Mn(SO4)2= 247. 0632 g/mol
H2O= 18. 015 g/mol
a)6. 30 g
b)2. 50 g
c)14. 2 g
d)9. 81 g
When, we perform a reaction with 5. 00 g of MnO₂ and 5. 00 g of H₂SO₄, then, 6.30 g of Mn(SO₄)₂ will be formed. Option, A is correct.
To solve this problem, we need to use stoichiometry to calculate the amount of Mn(SO₄)₂ formed from the given amount of MnO₂ and H₂SO₄.
First, we calculate number of moles of each reactant;
moles of MnO₂ =5.00 g / 86.9368 g/mol
= 0.0574 mol
moles of H₂SO₄ = 5.00 g / 98.0785 g/mol
= 0.0509 mol
From the balanced chemical equation, we can see that 1 mole of MnO₂ reacts with 2 moles of H₂SO₄ to produce 1 mole of Mn(SO₄)₂. Therefore, the limiting reactant is H₂SO₄, since it is present in a smaller amount than what is required to react with all of the MnO₂.
The amount of Mn(SO₄)₂ formed is limited by the amount of H₂SO₄, so we can calculate the amount of Mn(SO₄)₂ formed based on the number of moles of H₂SO₄;
moles of Mn(SO₄)₂ = 0.0509 mol H₂SO₄ × (1 mol Mn(SO₄)₂ / 2 mol H₂SO₄) = 0.0255 mol Mn(SO₄)₂
Finally, we can calculate the mass of Mn(SO₄)₂ formed using its molar mass;
mass of Mn(SO₄)₂ = 0.0255 mol × 247.0632 g/mol
= 6.307 g
Therefore, total 6.30 g of Manganese(II) sulfate will form.
Hence, A. is the correct option.
To know more about Manganese(II) sulfate here
https://brainly.com/question/8695145
#SPJ4
A chemist interested in the efficiency of a chemical reaction would calculate the:.
A chemist interested in the efficiency of a chemical reaction would calculate the c. percentage yield.
The percentage yield compares the actual yield of a reaction to the theoretical yield and indicates how efficient the reaction is in producing the desired product. It is calculated by dividing the actual yield by the theoretical yield and multiplying by 100 to express it as a percentage.
The other options listed are also important measurements in chemistry but are not directly related to assessing the efficiency of a reaction:
a. Mole ratio: The mole ratio is a ratio that indicates the stoichiometric relationship between the reactants and products in a chemical reaction. It is used to determine the relative amounts of substances involved in a reaction, but it does not directly measure the efficiency of the reaction.
b. Energy released: This refers to the energy that is released or absorbed during a chemical reaction. While energy considerations are important, they do not directly measure the efficiency of the reaction.
d. Rate of reaction: The rate of reaction refers to how quickly a chemical reaction occurs, which is an important factor but not the direct measurement of efficiency. The rate of reaction can be influenced by factors such as temperature, concentration, and catalysts, but it does not provide information about the overall efficiency of the reaction in terms of yield.
To know more about the chemical reaction refer here :
https://brainly.com/question/29039149#
#SPJ11
Complete question :
A chemist interested in the efficiency of a chemical reaction would calculate the :
a. mole ratio.
b. energy released.
c. percentage yield.
d. rate of reaction.
Plan an investigation to explore the relationship between properties of substances and the electrical forces within those substances.
What can properties of substances tell us about the electrical forces within those substances?
In this activity, you will plan and conduct an investigation to compare a single property across several substances. You must select a measurable property, such as boiling point or surface tension. After your investigation, you will compare the results and use your data to make inferences about the strength of the electrical forces in each substance you tested
The first step in this investigation will be to select several substances to test. It is important to choose substances that have similar chemical composition but differ in physical properties.
Once the substances have been selected, the next step is to measure the single property across each of the substances. This can be done through a variety of methods, such as using a thermometer to measure boiling points or a microscope to measure surface tension.
After the data has been collected, it should be compared and analyzed to determine how the property is related to the strength of the electrical forces in the substance. By comparing the data and making inferences, it is possible to determine how properties of substances can indicate the strength of the electrical forces within those substances.
Know more about Thermometer here
https://brainly.com/question/24189042#
#SPJ11
If a piece of aluminum has a heat capacity of 314 j/°c, how much will its temperature rise when it absorbs 8,291 j of heat?
We can use the formula Q = mcΔT to solve this problem, where Q is the amount of heat absorbed by the aluminum, m is the mass of the aluminum, c is its specific heat capacity, and ΔT is the change in temperature.
However, since we are not given the mass of the aluminum, we cannot solve for ΔT directly using this formula.
Instead, we can use the fact that the specific heat capacity of aluminum is given as 314 j/°c, which means that it takes 314 j of heat to raise the temperature of 1 gram of aluminum by 1 degree Celsius.
To find the mass of the aluminum, we can divide the total amount of heat absorbed by the specific heat capacity of aluminum:
m = Q / (c * ΔT)
Solving for ΔT, we get:
ΔT = Q / (m * c)
Substituting the given values, we have:
ΔT = 8,291 j / (m * 314 j/°c)
We need to find the value of ΔT, so we still need to solve for m. Without additional information, we cannot do so directly.
Therefore, we cannot provide a numerical answer to this problem without knowing the mass of the aluminum.
To know more about aluminum refer here
https://brainly.com/question/28989771#
#SPJ11
It’s due tomorrow and I don’t know how to do it.
Which substance is always produced in the reaction between hydrochloric acid and sodium hydroxide.
The reaction between hydrochloric acid ([tex]HCl[/tex]) and sodium hydroxide ([tex]NaOH[/tex]) is a classic example of an acid-base neutralization reaction. In this reaction, the hydrogen ions ([tex]H+[/tex]) in the acid react with the hydroxide ions ([tex]OH-[/tex]) in the base to form water ([tex]H2O[/tex]) and a salt, which in this case is sodium chloride ([tex]NaCl[/tex]).
The balanced chemical equation for the reaction is:
[tex]HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l)[/tex]
So, the substance that is always produced in the reaction between hydrochloric acid and sodium hydroxide is water and a salt, which is sodium chloride. This reaction is exothermic and the heat released during the reaction can be used to increase the temperature of the solution.
This reaction is widely used in the chemical industry for various applications such as neutralizing acidic waste, producing table salt, and in the production of soap and detergents.
To know more about neutralization reaction refer to-
https://brainly.com/question/28970253
#SPJ11
Two students made the Lewis dot diagrams of NH3. The diagrams are as shown.
Two visual diagrams of an N H three molecule are shown. Student As diagram on the left has nitrogen at the center and connects with each hydrogen atom by an arrow pointing away from nitrogen, one below, one on the right, and one on the left. There is a pair of dots above the nitrogen atom. Student Bs diagram on the right has nitrogen at the center connecting by a straight line to each hydrogen positioned below, to the left, and to the right of nitrogen.
Which student drew the correct Lewis dot diagram? (4 points)
Group of answer choices
Only Student A
Only Student B
Both Student A and Student B
Neither Student A nor Student B
Answer:
only student B
Explanation:
five electrons int eh valence shell of nitrogen atoms
The pressure at the bottom of a lake is 2. 35 atm. If water saturated with oxygen
(concentration 0,34 g/L) is carried by a current to to a depth where the solubility
of oxygen is 0. 21 g/L, what is the pressure of the water.
The pressure at the bottom of a lake is given as 2.35 atm, and we are asked to find the pressure of the water. Since water is the fluid in question, we can assume that it is incompressible and that its density is constant. To find the pressure of the water, we can use the following formula:
Pressure = Density x Acceleration due to gravity x Height
Here, the height refers to the depth of the lake, which we can assume to be the same as the height of the water column. The acceleration due to gravity is a constant, and the density of water is given as 0.21 g/L.
Substituting these values in the formula, we get:
Pressure = 0.21 g/L x 9.8 m/s^2 x Depth
Since the pressure at the bottom of the lake is given as 2.35 atm, we can convert this to SI units using the conversion factor:
1 atm = 101325 Pa
Therefore, 2.35 atm = 2.35 x 101325 Pa = 2.38 x 10^5 Pa
Substituting this value in the formula, we can solve for the depth:
2.38 x 10^5 Pa = 0.21 g/L x 9.8 m/s^2 x Depth
Depth = 114.7 m
Therefore, the pressure of the water at this depth is:
Pressure = 0.21 g/L x 9.8 m/s^2 x 114.7 m = 240.3 kPa
In conclusion, the pressure of the water at the bottom of the lake is 240.3 kPa. This is the pressure exerted by the water column due to its weight, and it is in addition to the atmospheric pressure. Understanding the pressure of fluids is important in many fields, such as hydrology, engineering, and physics.
To know more about pressure refer here
https://brainly.com/question/12971272#
#SPJ11
Which solubility curve on the right best represents the data table on the left?
A solubility curve is a graphical representation of the solubility of a substance in a specific solvent as a function of temperature.
The solubility is typically expressed in grams of solute per 100 grams of solvent. In order to answer the question of which solubility curve on the right best represents the data table on the left, we need to compare the solubility values in the data table with the solubility values on each of the curves.
We can see from the data table that the solubility of the substance increases with temperature, which is a common trend for most substances. As the temperature increases, the solvent molecules move faster, which allows more solute molecules to dissolve.
To compare the data table with the solubility curves, we need to look for the curve that shows an increase in solubility with increasing temperature. We can see that Curve A fits this description. The solubility values on Curve A increase as the temperature increases, just like the data table.
Therefore, we can conclude that Curve A best represents the data table on the left.
To know more about solubility curve, visit:
https://brainly.com/question/8591226#
#SPJ11
Calculate the heat energy transferred to 2. 3g of copper, which has a specific heat of 0. 385 J/g·°C, that is heated from 23. 0°C to 174. 0°C. (Enter the answer rounded to two decimal places with a space between the number and unit, ex. : 145. 23 J)
The heat energy transferred to 2.3g of copper is 133.01 J.
To calculate the heat energy transferred to the copper, we can use the formula:
q = mcΔT
where q is the heat energy transferred, m is the mass of the substance (2.3 g), c is the specific heat capacity (0.385 J/g·°C), and ΔT is the change in temperature (174.0°C - 23.0°C).
And;
ΔT = 174.0°C - 23.0°C = 151.0°C
Now, plug the values into the formula:
q = (2.3 g) × (0.385 J/g·°C) × (151.0°C)
q = 133.0085 J
Round the answer to two decimal places:
q = 133.01 J
To know more about specific heat capacity, click below.
https://brainly.com/question/22729342
#SPJ11
How many atoms of Hydrogen are in 12 grams of CH4?
Answer:
Molecular weight of CH4 is 16 CH4 has four hydrogen atoms 1 mole of a compound contain 6.023*1023 atoms 12 gm of CH4 = 0
