Which property is size-independent?
conductivity
width
volume
mass​

When, 1 mole of methane at 25°C in a 244.6 mL bulb would exert a pressure of 2.79 atm assuming it behaves as a real gas and obeys the van der Waals equation.

First, let's calculate the pressure exerted by 1 mole of methane at 25°C assuming it behaves as an ideal gas;

We can use Ideal Gas Law to calculate the pressure;

PV = nRT

where P is pressure, V is volume, n is number of moles, R is gas constant, and T is the temperature in Kelvin.

Converting the volume of the bulb to liters and the temperature to Kelvin;

V = 244.6 mL = 0.2446 L

T = 25°C = 298 K

For 1 mole of methane;

n = 1 mole

The gas constant for the Ideal Gas Law is;

R = 0.0821 L·atm/(mol·K)

Substituting the values into Ideal Gas Law equation;

P = (nRT) / V

P = (1 mole) x (0.0821 L·atm/(mol·K)) x (298 K) / (0.2446 L)

P = 3.24 atm

Therefore, 1 mole of methane at 25°C in a 244.6 mL bulb would exert a pressure of 3.24 atm assuming it behaves as an ideal gas.

Now, let's calculate the pressure exerted by 1 mole of methane at 25°C assuming it behaves as a real gas and obeys the van der Waals equation;

The van der Waals equation is;

(P + a(n/V)²) (V - nb) = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, T is the temperature in Kelvin, a is a constant that takes into account the attractive forces between molecules, b is a constant that takes into account the volume of the molecules, and (n/V) is the molar density.

For methane, the values of the van der Waals constants are;

a = 2.253 atm L²/mol

b = 0.0428 L/mol

Substituting the values into the van der Waals equation and solving for P;

P = (nRT / (V - nb)) - (a(n/V)² / V²)

P = (1 mole) x (0.0821 L·atm/(mol·K)) x (298 K) / (0.2446 L - (0.0428 L/mol x 1 mole)) - (2.253 atm L²/mol² / (0.2446 L)²)

P = 2.79 atm

Therefore, the pressure is  2.79 atm.

To know more about van der Waals equation here

https://brainly.com/question/5803619

#SPJ4

There are 0.0125 moles of Al₂(SO₄)₃ present in 50.0 mL of 0.250 M solution.

To determine the number of moles of Al₂(SO₄)₃ in 50.0 mL of 0.250 M solution, we need to use the formula:

moles = concentration x volume (in liters)

First, we need to convert the volume from milliliters to liters:

50.0 mL = 50.0/1000 L = 0.0500 L

Now, we can use the formula:

moles = 0.250 M x 0.0500 L = 0.0125 moles

So, there are 0.0125 moles of Al₂(SO₄)₃ present in 50.0 mL of 0.250 M solution.

In chemistry, moles are a unit of measurement used to quantify the amount of a chemical. One mole of a substance is defined as the amount of that substance containing the same number of particles as 12 grams of carbon-12. Avogadro's number is the number of particles.

In chemical processes, moles are frequently used to calculate the amounts of reactants and products involved. The number of moles of a material can be estimated using its mass and molar mass, or by multiplying a solution's concentration by its volume in liters.

learn more about moles here

https://brainly.com/question/29367909

#SPJ1

Approximately 1.82 liters of ethylene glycol should be added to the water in the radiator to make a 50:50 mixture that will protect the system to -18°C.

A 50:50 mixture of ethylene glycol and water is recommended to provide protection down to approximately -37°C. This mixture will provide freeze point depression of approximately -34°C. We can use the following equation to calculate the volume of ethylene glycol required:

Veth = (Vtot × Ceth) / ρeth

where:

Veth = volume of ethylene glycol

Vtot = total volume of mixture

Ceth = concentration of ethylene glycol

ρeth = density of ethylene glycol

To calculate volume of ethylene glycol required to make a 50:50 mixture, we can substitute these values into the equation:

[tex]Veth = (Vtot * Ceth) / \rho eth \\Veth = (4 L * 0.5) / 1.1 kg/L \\Veth = 1.82 L[/tex]

To know more about ethylene glycol, here

brainly.com/question/10405060

#SPJ4

- Dialcohol: used in polyester synthesis
- Diester: used in polyester synthesis
- Dinitrodiacid: neither polyester nor nylon synthesis
- Diamine: used in nylon synthesis
- Diether: neither polyester nor nylon synthesis

1. Dialcohol: This type of bifunctional molecule is used in the synthesis of polyesters. Polyesters are formed through the condensation reaction between a dialcohol and a diacid or diester.

2. Diester: Diesters are also used in the synthesis of polyesters. They react with dialcohols to form polyester chains.

3. Dinitrodiacid: Dinitrodiacids are not commonly used in the synthesis of either polyesters or nylons. Their nitro functional groups make them less reactive for the condensation reactions required for these polymer types.

4. Diamine: Diamines are used in the synthesis of nylons. Nylons are formed through the condensation reaction between a diamine and a diacid or a diester with a specific type of functional groups, such as adipoyl chloride.

5. Diether: Diethers are not used in the synthesis of polyesters or nylons. They lack the necessary functional groups (alcohol, ester, or amine) for the condensation reactions needed to form these polymers.

Learn more about polyesters at https://brainly.com/question/13094865

#SPJ11

The basic element of drawing that helps us illustrate the realistic view of an object is the "line."

Lines are essential as they define shapes, outlines, and edges of objects in drawings. The "alphabet of lines" refers to the different types of lines used in technical drawing, such as continuous, dashed, and dotted lines.

These lines help convey various details and aspects of the object being drawn.

In the "drawing" process, you use these lines to create a realistic representation of an object by capturing its dimensions, proportions, and perspective.

The "layout" is the arrangement of these lines and shapes on the drawing surface, ensuring a clear and organized presentation. To "generate" a drawing, you must effectively utilize these lines, the alphabet of lines, and the layout to create a visually accurate representation of the object you are depicting.

By incorporating these terms and concepts, you can create a detailed and realistic drawing that effectively communicates the appearance and characteristics of the object in question.

To know more about line refer here: https://brainly.com/question/31537328#

#SPJ11

The property that allows filter paper to carry out its function is known as porosity.

Porosity refers to the measure of empty space within a material, and in the case of filter paper, it allows liquids to pass through while trapping solid particles or impurities. This property is essential for filter paper to effectively perform its function in separating solids from liquids.

Filter paper is typically made from cellulose fibers that are tightly woven together to create a dense and permeable material. The porosity of the filter paper depends on the size and shape of the pores within the material.

The smaller the pore size, the finer the filtration that can be achieved, while larger pore sizes allow for faster flow rates but may not effectively trap smaller particles.

In summary, the porosity property of filter paper is what enables it to separate solid particles from liquids by allowing the liquid to pass through while trapping the particles.

To know more about porosity, visit:

https://brainly.com/question/29311544#

#SPJ11

49.3 liters of iodine gas will be produced from the complete decomposition of 110 liters of hydrogen iodide gas at STP.

The balanced chemical equation for the decomposition of hydrogen iodide is:

2HI (g) → H₂ (g) + I₂ (g)

According to the equation, for every 2 moles of hydrogen iodide that decompose, 1 mole of iodine gas is produced. Using the ideal gas law, we can convert the volume of hydrogen iodide gas to moles:

where n is the number of moles, P is the pressure, V is the volume, R is the gas constant, and T is the temperature.

Assuming standard temperature and pressure (STP), which is 0°C and 1 atm, we have:

Therefore, the number of moles of iodine gas produced is:

Using the ideal gas law again, we can convert the number of moles of iodine gas to volume at STP:

To learn more about complete decomposition, here

https://brainly.com/question/14524445

#SPJ4

The complete question is:

How many liters of iodine gas will be produced from the complete decomposition of 110 L of hydrogen iodine​? 2HI (g) → H₂ (g) + I₂ (g)

Aluminum has a heat of fusion of 0.9 j/g. if you have 23.9g of aluminum, 21.51 J of energy would be required to melt this amount of aluminum at 660.3°c.

To calculate the energy required to melt 23.9 g of aluminum, we need to use the following formula:

Q = m * ΔHfus

where Q is the energy required, m is the mass of aluminum, and ΔHfus is the heat of fusion of aluminum.

Substituting the given values, we get:

Q = 23.9 g * 0.9 J/g = 21.51 J

Therefore, 21.51 J of energy would be required to melt 23.9 g of aluminum at 660.3°C.

To know more about the heat of fusion refer here :

https://brainly.com/question/14053504#

#SPJ11

James makes a 260 g solution when he adds 10 g of salt to 250 g of water and stirs until it dissolves.

When James adds 10 g of salt to 250 g of water and stirs until it dissolves, he creates a solution.

A solution is a homogeneous mixture where one substance (the solute) is dissolved in another substance (the solvent). In this case, water is the solvent and salt is the solute. The mass of the resulting solution will be the sum of the mass of the solute and the mass of the solvent.

So, the mass of the resulting solution will be:

Mass of solution = Mass of water + Mass of salt

Mass of solution = 250 g + 10 g

Mass of solution = 260 g

Therefore, James makes a 260 g solution when he adds 10 g of salt to 250 g of water and stirs until it dissolves.

To know more about homogeneous mixture refer to-

https://brainly.com/question/30587533

#SPJ11

1.2 grams of Barium Chloride (BaCl₂) are needed to make 220 mL of 0.040 M solution.

To determine the amount of grams of Barium Chloride (BaCl₂) needed to compound a 220 mL 0.040 M solution, we can implement the following formula:

mass (in grams) = molarity × volume (in liters) × molar mass

convert the volume of the mixture from milliliters (mL) to litres (L):

220 mL =  0.220 L by : 220/1000

The molar mass of BaCl₂ is 137.33 g/mo

Therefore, when utilizing the equation above, we can deduce that:

mass = 0.040 mol/L × 0.220 L × 137.33 g/mol = 1.2 g

Learn more about Barium Chloride at

https://brainly.com/question/29519054

#SPJ1

The substance that will cool the fastest when equal masses are heated to the same temperature is the one with the lowest specific heat.

This is because a substance with a lower specific heat requires less energy to raise its temperature by a certain amount, and therefore it will release heat more quickly when it cools down.

Out of the given substances, substance A has the lowest specific heat of 0.90 J/g-°C, so it will cool the fastest when equal masses are heated to the same temperature.

Substance B has a specific heat of 1.70 J/g-°C, substance C has a specific heat of 2.70 J/g-°C, and substance D has the highest specific heat of 4.18 J/g-°C.

To know more about specific heat refer to-

https://brainly.com/question/11297584

#SPJ11

There are 0.0208 moles in 1.25 x 10^20 molecules of HF.

To determine the number of moles in 1.25 x 10^20 molecules of HF, we need to use Avogadro's number. Avogadro's number is the number of particles in one mole of a substance, and it is equal to 6.022 x 10^23 particles/mol.

So, first we need to convert the number of molecules of HF into the number of moles:

1.25 x 10^20 molecules HF x (1 mol HF/6.022 x 10^23 molecules HF) = 0.0208 mol HF

Therefore, there are 0.0208 moles in 1.25 x 10^20 molecules of HF.

Know more about Avogadro's number here:

https://brainly.com/question/28812626

#SPJ11

The uranium rod undergoes a temperature change of 2.41°C when 3.4 kJ of heat is added to it

To work out the adjustment of temperature of the uranium pole, we can utilize the equation:

Q = m * c * ΔT

Where Q is the intensity added, m is the mass of the uranium pole, c is the particular intensity of uranium, and ΔT is the adjustment of temperature.

In the first place, we want to change over the mass of the pole from kilograms to grams:

m = 1.4 kg * 1000 g/kg = 1400 g

Then, we can rework the recipe to settle for ΔT:

ΔT = Q/(m * c)

Subbing the given qualities:

ΔT = (3.4 kJ)/(1400 g * 0.12 J/gC) = 2.41 C

This arrangement utilizes the recipe Q = m * c * ΔT to work out the adjustment of temperature of a 1.4 kg uranium pole when 3.4 kJ of intensity is added. The mass is switched over completely to grams, and the particular intensity of uranium is utilized to find ΔT, which is viewed as 2.41°C.

Hence, the uranium pole goes through a temperature change of 2.41°C when 3.4 kJ of intensity is added to it.

To learn more about temperature change, refer:

https://brainly.com/question/14283324

#SPJ1

C. Na (aq) + H2O (aq) NaOH (aq) + H2 (g) of the following chemical reactions represents a single replacement reaction

When a more reactive ingredient in a compound replaces a less reactive element, the reaction is referred to as a single displacement reaction. Metal, hydrogen, and halogen displacement reactions are the three different types of displacement reactions.

When chlorine is introduced to a solution of sodium bromide in gaseous form (or as a gas dissolved in water), bromine is replaced by chlorine. Sodium bromide's bromine is replaced with chlorine because it is more reactive than bromine, which causes the solutions to become blue.

learn more about single-displacement

brainly.com/question/7959057

#SPJ1

In a suspected case of carbon monoxide poisoning, a layer of carbon dioxide is added to prevent reaction with oxygen in the air.

Carbon monoxide is a colorless, odorless, and tasteless gas that can cause serious health issues or even death when inhaled in large amounts. It is produced from incomplete combustion of fossil fuels, such as gasoline, oil, coal, and wood.

Carbon monoxide molecules have a high affinity for hemoglobin in the blood, which reduces the amount of oxygen that can be transported to vital organs and tissues.

When someone is suspected of having carbon monoxide poisoning, the first step is to remove them from the contaminated environment and provide them with fresh air. The next step is to administer oxygen therapy to increase the amount of oxygen in their bloodstream and reverse the effects of carbon monoxide poisoning.

However, administering pure oxygen can lead to a chemical reaction between carbon monoxide and oxygen, which produces carbon dioxide. This can cause further complications and may worsen the patient's condition.

To prevent this reaction, a layer of carbon dioxide is added to the oxygen supply. This layer acts as a barrier between oxygen and carbon monoxide, preventing the chemical reaction from occurring.

This technique, called hyperbaric oxygen therapy, is used in severe cases of carbon monoxide poisoning to quickly eliminate the toxic gas from the body and reduce the risk of long-term damage.

To know more about carbon monoxide, visit:

https://brainly.com/question/22530423#

#SPJ11

The correct interpretation is  89.6 L of [tex]NH_{3}[/tex](g) react with 156.8 L of [tex]O_{2}[/tex](g) to produce 89.6 L of [tex]NO_{2}[/tex](g) and 134.4 L of [tex]H_{2} O[/tex](g).

We know that one mole of a gas does occupy 22.4 L. We can now use this to obtain the number of volumes of the gas based on the stoichiometric coefficient that has been given in the problem.

Molar volume of a gas refers to the volume occupied by one mole of a gas at a specific temperature and pressure. This value is useful in many applications of chemistry, such as in stoichiometric calculations and the determination of gas densities.

Using the stoichiometric coefficients we can see that the volume of the gases are;

Ammonia - 89.6 L

Oxygen -  156.8 L

Nitrogen dioxide - 89.6 L

Water -  134.4 L

Learn more about molar volume:https://brainly.com/question/29884686

#SPJ1

When calcium metal reacts with chlorine gas, they form an ionic compound known as calcium chloride. The chemical formula for calcium chloride is [tex]CaCl2[/tex].

During the reaction, calcium metal loses two electrons to form [tex]Ca2+[/tex] ions while chlorine gas accepts these electrons to form [tex]Cl-[/tex] ions.

The electrostatic attraction between the positively charged [tex]Ca2+[/tex] ions and negatively charged [tex]Cl-[/tex] ions results in the formation of the solid ionic compound, calcium chloride.

Calcium chloride is a white crystalline solid that is highly soluble in water. It has a wide range of applications in industries such as food, pharmaceuticals, and de-icing of roads.

Additionally, it is used as a drying agent in laboratory procedures and as a source of calcium ions in biological and medical applications.

To know more about calcium chloride refer to-

https://brainly.com/question/664620

#SPJ11

The type of radiation most likely used in a smoke detector is alpha radiation.

Alpha radiation is used in smoke detectors because it can be easily stopped by small smoke particles. Americium-241, a radioactive element, emits alpha particles which ionize the air, creating a small electric current. When smoke enters the detector, it absorbs the alpha particles, disrupting the current and triggering the alarm.

Alpha radiation is ideal for this application as it has a low penetration power, meaning even small particulates like smoke can stop its travel, ensuring the detector's sensitivity to smoke. Additionally, alpha radiation poses a minimal risk to human health when contained properly within the device.

To know more about alpha radiation click on below link:

https://brainly.com/question/6070167#

#SPJ11

The concentration of the HCl solution is 0.25 mol/L .

To determine the concentration of the HCl solution when titrated with 25mL of a 0.60M KOH solution, we need to use the following equation:
moles of HCl = moles of KOH

First, let's find the moles of KOH:
moles of KOH = volume (L) × concentration (M)
moles of KOH = 0.025 L × 0.60 mol/L
moles of KOH = 0.015 mol

Since the moles of HCl = moles of KOH, we have 0.015 mol of HCl. Now, we can calculate the concentration of the HCl solution:
concentration of HCl (M) = moles of HCl / volume of HCl (L)

The volume of HCl solution is given as 60 mL, which is equal to 0.060 L. Therefore:
concentration of HCl (M) = 0.015 mol / 0.060 L
concentration of HCl (M) = 0.25 mol/L
The concentration of the HCl solution is 0.25 mol/L (option 4).

To know more about concentration of the HCl solution  :

https://brainly.com/question/16998467

#SPJ11

The equilibrium expression for the ionization of HOI is:

Kc = [H⁺][OI⁻]/[HOI]

In this expression, [H⁺] represents the concentration of hydrogen ions, [OI⁻] represents the concentration of hypoiodite ions, and [HOI] represents the concentration of the undissociated hypohalous acid. The equilibrium constant, Kc, is a measure of the extent to which the reaction has reached equilibrium.

In the case of HOI, the equilibrium constant can be used to determine the degree of ionization of the acid in solution. If Kc is large, it indicates that the reaction favors the formation of ions and that the acid is strong. If Kc is small, it indicates that the reaction favors the formation of undissociated acid and that the acid is weak. The value of Kc can also be used to calculate the concentrations of the different species in the solution at equilibrium, given the initial concentrations and the stoichiometry of the reaction.

To learn more about equilibrium expression, here

https://brainly.com/question/27110003

#SPJ4

The complete question is:

Write the equilibrium expression for the ionization of HOI?

The outcome of pulse rate measurements in blackworms collected from an acidic environment will likely depend on how the blackworms respond to changes in pH and whether they experience acidosis or alkalosis as a result.

It is difficult to predict the outcome of pulse rate measurements in blackworms collected from an environment with an acidic pH without more information about the blackworms' physiological responses to changes in pH. However, it is known that changes in pH can have significant effects on the body's internal environment, leading to either acidosis or alkalosis. Acidosis occurs when the pH of the blood drops below normal, leading to an increase in acidity, while alkalosis occurs when the pH of the blood rises above normal, leading to a decrease in acidity. Both acidosis and alkalosis can affect pulse rates. In the case of acidosis, the pulse rate may increase in order to compensate for the effects of increased acidity. Conversely, in alkalosis, the pulse rate may decrease in order to minimize the effects of decreased acidity.

Learn more about acidosis https://brainly.com/question/23710507

#SPJ11

The concentration of the Ba(OH)₂ solution is 0.1 M.

To find the concentration of the Ba(OH)₂ solution, we can use the balanced equation for the neutralization reaction between Ba(OH)₂ and HNO₃:

Ba(OH)₂ + 2HNO₃ → Ba(NO₃)₂ + 2H₂O

From the equation, we can see that one mole of Ba(OH)₂ reacts with two moles of HNO₃. Therefore, the moles of HNO₃ used in the neutralization reaction can be calculated as follows:

moles of HNO₃ = 1.52 M × 0.0234 L = 0.035568 mol

Since the moles of HNO₃ is equal to the moles of Ba(OH)₂ in the reaction, we can calculate the concentration of the Ba(OH)₂ solution as follows:

concentration of Ba(OH)₂ = moles of Ba(OH)₂ / volume of Ba(OH)₂ solution

moles of Ba(OH)₂ = moles of HNO₃ / 2 = 0.035568 mol / 2 = 0.017784 mol

volume of Ba(OH)₂ solution = 0.063 L

concentration of Ba(OH)₂ = 0.017784 mol / 0.063 L ≈ 0.1 M

To know more about concentration, refer here:

https://brainly.com/question/30639206#

#SPJ11

The change in entropy (ΔS) of a gas with 10⁵ particles when the volume changes to 50 times its original value is 2.30 kJ.

To calculate the change in entropy, we can use the formula ΔS = Nkln(V2/V1), where N is the number of particles, k is the Boltzmann constant (1.38 x 10⁻² J/K), and V2 and V1 are the final and initial volumes, respectively. In this case, N = 10⁵, V2 = 50V1, and V1 = V1.

Step 1: Substitute the values into the formula:
ΔS = (10⁵)(1.38 x 10⁻²³ J/K)ln(50V1/V1)

Step 2: Simplify the equation by canceling V1 in the ratio:
ΔS = (10⁵)(1.38 x 10⁻²³ J/K)ln(50)

Step 3: Evaluate the natural logarithm of 50:
ΔS = (10⁵)(1.38 x 10⁻²³ J/K)(3.91)

Step 4: Multiply the values together:
ΔS = 5.38 x 10⁻²¹ J

Step 5: Convert joules to kilojoules:
ΔS = 2.30 x 10¹⁸ kJ

Thus, the change in entropy of the gas is 2.30 kJ.

To know more about Boltzmann constant click on below link:

https://brainly.com/question/30639301#

#SPJ11

The temperature of the helium sample increased by 0.159 °C.

To solve this problem, we can use the equation:

q = mcΔT

where q is the heat absorbed, m is the mass of the helium sample, c is the specific heat capacity of helium, and ΔT is the change in temperature.

Substituting the given values, we get:

           q = mcΔT

125.7 cal = (634.5 g)(1.241 cal/(g·°C))ΔT

Solving for ΔT, we get:

ΔT = 125.7 cal / (634.5 g * 1.241 cal/(g·°C))

ΔT = 0.159 °C

To know more about specific heat capacity, click below.

https://brainly.com/question/22729342

#SPJ11

The most likely source of a substance containing carbon, hydrogen, oxygen, and nitrogen is a living organism, such as a plant or an animal.

This is because these four elements are the main components of organic matter, which is found in living things. Carbon is the backbone of organic molecules, while hydrogen and oxygen are also found in many organic compounds, including carbohydrates and lipids.

Nitrogen is an essential component of amino acids, which are the building blocks of proteins. Therefore, if a substance contains all four of these elements, it is likely that it was produced by a living organism or is a byproduct of a living organism's metabolism.

However, this is not always the case, as there are other sources of these elements, such as fossil fuels, which contain carbon and hydrogen, and water, which contains hydrogen and oxygen.

To know more about organic matter, refer here:

https://brainly.com/question/11165274#

#SPJ11

Sulfuric acid may act as a catalyst, protonating agent or dehydrating agent in the multi-step experiment where both acetic acid and sulfuric acid are used on day 1.

Sulfuric acid is often used as a catalyst in chemical reactions. In the multi-step experiment where both acetic acid and sulfuric acid are used on day 1, sulfuric acid may act as a catalyst for one or more of the reactions. Sulfuric acid can also protonate certain functional groups in organic compounds, making them more reactive towards other reagents in the reaction mixture.

Additionally, sulfuric acid can act as a dehydrating agent, removing water from the reaction mixture and driving the reaction towards the formation of the desired product. The specific role of sulfuric acid in the multi-step experiment will depend on the nature of the reactions being carried out and the specific reaction conditions.

To know more about sulfuric acid, here

brainly.com/question/30039513

#SPJ4

--The complete question is, What is the role of sulfuric acid in a multi-step experiment where both acetic acid and sulfuric acid are used on day 1?--

The molality of the solution containing 4. 0 grams of NaCl dissolved in 3000 grams of water is approximately 0.0228 mol/kg.

To calculate the molality of a solution, you can use the formula:

molality = moles of solute / mass of solvent (in kilograms).

In this case, the solute is NaCl, and the solvent is water.

The number of moles of NaCl needs to be calculated:

The atomic mass of Na (sodium) is 22.99 g/mol, and Cl (chlorine) has an atomic mass of 35.45 g/mol. Therefore, the molar mass of NaCl can be determined by adding these two values together: (22.99 + 35.45) g/mol = 58.44 g/mol. The moles of NaCl can be found by dividing the mass by the molar mass: 4.0 g / 58.44 g/mol ≈ 0.0685 moles.

Next, convert the mass of water to kilograms:
- 3000 g = 3.0 kg.

Finally, calculate the molality using the formula:
- molality = 0.0685 moles / 3.0 kg ≈ 0.0228 mol/kg.

Therefore, the molality of the solution is approximately 0.0228 mol/kg.

Know more about Molality here:

https://brainly.com/question/26921570

#SPJ11

A) The empirical formula of acid X is CH2O since it contains 31.6% carbon, 5.3% hydrogen, and 63.1% oxygen, b) the relative molecular mass of acid X is 34.2 g mol⁻¹.

An empirical formula is a chemical formula that indicates the simplest, whole number ratio of atoms in a molecule. It shows the types of atoms and the number of each type of atom that make up a single molecule of a compound.

a. The empirical formula of acid X is CH2O since it contains 31.6% carbon, 5.3% hydrogen, and 63.1% oxygen.

b. The number of moles of acid X in 11.4 g of the solution is 11.4/M, where M is the relative molecular mass of acid X. The number of moles of NaOH required to react with this amount of acid X is 0.100 mol dm⁻³ × 30 cm² = 0.03 mol. Thus, the mole ratio of acid X to NaOH is 11.4/M : 0.03, or M : 0.03 × 11.4/M. This can be rearranged to give M = 0.03 × 11.4/M, or M = 34.2 g mol⁻¹. Therefore, the relative molecular mass of acid X is 34.2 g mol⁻¹.

To learn more about empirical formula

https://brainly.com/question/1603500

#SPJ4

The alpha of the investment is - 0.8%.

The alpha of an investment is a measure of its risk-adjusted performance. It indicates the excess return earned by the investment compared to the return predicted by the market based on its beta.

The formula to calculate alpha is:

alpha = actual return - expected return

where the expected return is the risk-free rate plus the product of the market return and the investment's beta.

Here, we are given:

actual return = 10%

market return = 10%

risk-free rate = 2%

beta = 1.1

Expected return = risk-free rate + beta * (market return - risk-free rate)

Expected return = 2% + 1.1 * (10% - 2%)

Expected return = 10.8%

Therefore, the alpha of the investment is:

alpha = actual return - expected return

alpha = 10% - 10.8%

alpha = -0.8%

The negative value of alpha indicates that the investment underperformed compared to what was expected based on its beta and the market return.

To know more about investment refer to-

https://brainly.com/question/15353704

#SPJ11

Complete Question