JAMIE SPUN THE SPINNER SHOWN 30 TIMES AND RECORDED THE FREQUENCY OF
EACH RESULT IN THE TABLE BELOW. USE THE TABLE TO COMPLETE THE STATEMENTS
IN THE ORANGE

To solve this problem, we need to use related rates. Let's start by drawing a diagram:

```
        /\
       /  \
      /    \
     /      \
    /        \
   /__________\
```

We know that the radius of the conical pile is always two times its height, so we can label the diagram as follows:

```
        /\
       /  \
      /    \
     /      \
    /        \
   /__________\
  /|    r=2h   \
 / |___________\
```

Now we need to find an equation that relates the height of the pile to its radius. We can use the formula for the volume of a cone:

```
V = (1/3)πr^2h
```

We want to solve for h in terms of r:

```
V = (1/3)πr^2h
3V/πr^2 = h
```

Now we can differentiate both sides of this equation with respect to time:

```
d/dt (3V/πr^2) = d/dt h
0 = (3/πr^2) dV/dt - (2/πr^3) dr/dt
```

We're given that the height is increasing at a rate of 2 cm/s when the pile is 11 cm high, so we know that:

```
dh/dt = 2 cm/s
h = 11 cm
```

We want to find the rate at which sand is leaving the bin, which is given by `dV/dt`. We can solve for this using the equation we derived:

```
0 = (3/πr^2) dV/dt - (2/πr^3) dr/dt
dV/dt = (2/3)πr^2 (dh/dt) / r
```

Now we just need to plug in the values we know:

```
dh/dt = 2 cm/s
h = 11 cm
r = 2h = 22 cm

dV/dt = (2/3)π(22)^2 (2) / 22
dV/dt = 264π/3
```

So the rate at which sand is leaving the bin when the pile is 11 cm high is `264π/3 cm^3/s`.

To solve this problem, we can use the relationship between the radius and height of the conical pile, as well as the given rate of height increase.

Since the radius (r) is always two times the height (h), we have r = 2h. The volume (V) of a cone is given by the formula V = (1/3)πr^2h. We can substitute r with 2h, so V = (1/3)π(2h)^2h.

Now, let's differentiate both sides with respect to time (t):

dV/dt = (1/3)π(8h^2)dh/dt

When the height is 11 cm, the rate of height increase (dh/dt) is 2 cm/s. We can substitute these values into the equation:

dV/dt = (1/3)π(8(11)^2)(2)

Solving for dV/dt:

dV/dt ≈ 2046.92 cm³/s

At that instant, the sand is leaving the bin at a rate of approximately 2046.92 cm³/s.

Learn more about radius here: brainly.com/question/30106091

#SPJ11

The probability that Nguyen will choose a can of chicken noodle soup is 1/3. Therefore, the correct option is B.

To find the probability, you need to divide the number of favorable outcomes (chicken noodle soup cans) by the total number of possible outcomes (total cans of soup). Hence,

1. Count the total number of cans of soup: 4 chicken noodle + 2 tomato + 3 vegetable + 3 potato = 12 cans in total.

2. Count the number of chicken noodle soup cans: 4 cans.

3. Divide the number of chicken noodle soup cans (4) by the total number of cans (12): 4/12.

4. Simplify the fraction: 4/12 can be simplified to 1/3.

Therefore, the probability of choosing a chicken noodle soup is option B: 1/3.

Note: The question is incomplete. The complete question probably is: Nguyen has the following cans of soup in his pantry: 4 cans of chicken noodle soup; 2 cans of tomato soup; 3 cans of vegetable soup; 3 cans of potato soup. He randomly chooses a can of soup for lunch. What is the probability that he will choose chicken noodle soup? a. ½ b. 1/3 c. 1/6 d. ¼.

Learn more about Probability:

https://brainly.com/question/25839839

#SPJ11

2x - 3 would be 92 - 3 = 89 inches, which is the length of the table

The table needs to be 2 times longer than it is wide, so its length is 2 times its width, or 2x.

The table also needs to be 3 inches shorter than it is wide, so its width is x + 3 inches.

The area of the table is 4,608 square inches, so we can set up an equation:

2x(x + 3) = 4,608

Simplifying this equation:

2x²+ 6x = 4,608

Dividing both sides by 2:

x²+ 3x - 2,304 = 0

We can solve for x using the quadratic formula:

x = (-b ±  √(b² - 4ac)) / 2a

In this case, a = 1, b = 3, and c = -2,304. Substituting these values:

x = (-3 ±  √(3² - 4(1)(-2,304))) / 2(1)

Simplifying:

x = (-3 ±  √(9 + 9,216)) / 2

x = (-3 ±  √(9,225)) / 2

x = (-3 ± 95) / 2

x = 46 or x = -49

Since the width of the table cannot be negative, we can ignore the negative solution. Therefore, x needs to be 46 inches to fit the given requirements.

The length of the table is 2x, or 2(46) = 92 inches, and the width is x + 3, or 46 + 3 = 49 inches. The area is 92 * 49 = 4,508 square inches, which matches the given area requirement.

So, 2x - 3 would be 92 - 3 = 89 inches, which is the length of the table.

Learn more about Length

brainly.com/question/9842733

#SPJ11

The component of b onto a is (-1/3, 2/3, -1/3).

To find the component of b onto a, we first need to find the projection of b onto a. The projection of b onto a is given by the formula:

proj_a(b) = (b dot a / ||a||^2) * a

where dot represents the dot product and ||a|| represents the magnitude of vector a.

We can calculate the dot product of a and b as follows:

a dot b = (-2*1) + (4*0) + (2*3) = 4

We can calculate the magnitude of a as follows:

||a|| = sqrt((-2)^2 + 4^2 + 2^2) = sqrt(24) = 2sqrt(6)

Now we can plug these values into the formula for the projection of b onto a:

proj_a(b) = (b dot a / ||a||^2) * a
proj_a(b) = (4 / (2sqrt(6))^2) * (-2, 4, 2)
proj_a(b) = (4 / 24) * (-2, 4, 2)
proj_a(b) = (-1/3, 2/3, -1/3)

Finally, the component of b onto a is simply the projection of b onto a:
comp_a(b) = (-1/3, 2/3, -1/3)
learn more about components here: brainly.com/question/29306131

#SPJ11

An equation that models this relationship include the following: C. t = 5d.

In Mathematics, a proportional relationship produces equivalent ratios and it can be modeled or represented by the following mathematical equation:

y = kx

Where:

Next, we would determine the constant of proportionality (k) for the data points contained in the table as follows:

Constant of proportionality, k = y/x = t/d

Constant of proportionality, k = 5/1

Constant of proportionality, k = 5.

Therefore, the required equation is given by;

t = kd

t = 5d

Read more on proportional relationship here: brainly.com/question/28350476

#SPJ1

Missing information:

The question is incomplete and the complete question is shown in the attached picture.

5 bonds were traded during this session.

Based on the provided bond listing for Pacific Bell, the number of bonds traded during this session is 5. Here's the breakdown of the information in the 5-column table:

- Column 1 (Bonds): PacBell 6 5/8 34
- Column 2 (Current Yield): 6.55
- Column 3 (Volume): 5
- Column 4 (Close): 99 1/4
- Column 5 (Net Change): +1/8

The "Volume" column indicates the number of bonds traded during the session. In this case, the volume entry is 5. Therefore, 5 bonds were traded during this session.

To know more about bonds

https://brainly.com/question/29778585

#SPJ11

The equation y=0.96x represents the cost in dollars and cents, y, for x bottles of apple juice at store A. This means that if Landon wants to buy x bottles of apple juice from store A, he would pay 0.96x dollars and cents. However, we do not know the value of x from the given information.

On the other hand, we know that Landon can buy 14 bottles of apple juice from store B for $34.16. This means that the cost of one bottle of apple juice at store B is $2.44 (34.16 ÷ 14). We do not know the cost of one bottle of apple juice at store A, but we can use the equation y=0.96x to find out.

Let's assume that Landon wants to buy 14 bottles of apple juice from store A as well. We can substitute x=14 in the equation to find the total cost:

y = 0.96(14) = 13.44

This means that Landon would pay $13.44 for 14 bottles of apple juice at store A. However, we can see that buying 14 bottles of apple juice from store B is cheaper than buying the same amount from store A, as Landon would pay $34.16 at store B and $13.44 at store A. Therefore, it is more cost-effective for Landon to buy apple juice from store B in this case.

To know more about dollars refer here

https://brainly.com/question/14982791#

#SPJ11

Janice's monthly payment for her 5-year, 4% APR car loan would be $626.38.

To calculate Janice's monthly payment, we first need to use the formula for calculating loan payments:

Loan Payment = Loan Amount / Discount Factor

The discount factor can be calculated using the following formula:

Discount Factor = [(1 + r)ⁿ] - 1 / [r(1 + r)ⁿ]

Where r is the monthly interest rate (4% divided by 12 months = 0.00333) and n is the total number of payments (5 years x 12 months = 60).

Plugging in the values, we get:

Discount Factor = [(1 + 0.00333)⁶⁰] - 1 / [0.00333(1 + 0.00333)⁶⁰] = 55.8389

Now, we can calculate Janice's monthly payment:

Loan Payment = $35,000 / 55.8389 = $626.38

Know more about loan here:

https://brainly.com/question/11794123

#SPJ11

The number of students in each bus is 15, and the number of students in each van is 28.

To find the number of students in each van and bus for the field trip to Yellowstone National Park, we can set up a system of equations using the given information. Let x represent the number of students in each van and y represent the number of students in each bus.

For high school A, we have:
2x + 8y = 254

For high school B, we have:
6x + 11y = 398

Now, we can solve this system of equations using the substitution or elimination method. We will use the elimination method:

Step 1: Multiply the first equation by 3 to make the coefficients of x the same in both equations:
6x + 24y = 762

Step 2: Subtract the second equation from the new first equation:
(6x + 24y) - (6x + 11y) = 762 - 398
13y = 364

Step 3: Divide both sides by 13 to find the value of y:
y = 364 / 13
y = 28

Now that we have the number of students in each bus, we can find the number of students in each van:

Step 4: Substitute y back into the first equation:
2x + 8(28) = 254
2x + 224 = 254

Step 5: Subtract 224 from both sides to find the value of x:
2x = 30

Step 6: Divide both sides by 2 to find x:
x = 15

Learn more about the number of students: https://brainly.com/question/24644930

#SPJ11

The first four nonzero terms are 1 + t - (t^2)/2 - (t^3)/3 + (t^4)/8

To find the first 4 nonzero terms of the Taylor series for the function f(t) = e^(t)cos(t) about 0,

we can use the known Taylor series for e^(t) and cos(t).

The Taylor series for e^(t) is:

e^(t) = 1 + t + (t^2)/2! + (t^3)/3! + ...

And the Taylor series for cos(t) is:

cos(t) = 1 - (t^2)/2! + (t^4)/4! - (t^6)/6! + ...

To find the Taylor series for f(t) = e^(t)cos(t), we can multiply these two series together using the distributive property of multiplication. We get:

f(t) = (1 + t + (t^2)/2! + (t^3)/3! + ...) * (1 - (t^2)/2! + (t^4)/4! - (t^6)/6! + ...)

Expanding this out, we get:

f(t) = 1 + t - (t^2)/2 - (t^3)/3 + (t^4)/8 + (t^5)/15 - (t^6)/72 - ...

The first 4 nonzero terms of this series are:

f(t) = 1 + t - (t^2)/2 - (t^3)/3 + (t^4)/8 + ...

So, the first 4 nonzero terms of the Taylor series for f(t) = e^(t)cos(t) about 0 are:

1 + t - (t^2)/2 - (t^3)/3 + (t^4)/8

To know more about Taylor series:

https://brainly.com/question/29733106

#SPJ11

Answer: x = 1, y = 5

Step-by-step explanation:

I assume you want to solve this system of linear equations:

from the first one:

2x + y = 7

.: y = 7 - 2x

substituting this for the y in the second equation:

3x - 2(7 - 2x) = -7

3x - 14 + 4x = -7

7x = 7

x = 1

From before we know that y = 7 - 2x

so now that we know x = 1, we can say y = 7 - 2(1) = 5

So x = 1, y = 5

The maximum volume of a cone that can be carved from the foam cylinder is approximately 9.42 cubic inches.

Given data:

diameter = 3 inches

radius = r = 3 ÷ 2 = 1.5 inches

height = 4 inches

We need to find the maximum volume of a cone that can be carved from the foam cylinder. The volume of a cone is given by the formula:

V = [tex]\frac{1}{3}\pi r^2h[/tex]

where:

V = volume

r = radius of the base

h = height

π = 3.14.

Substituting the r, h, and  π values in the formula, we get:

V = [tex]\frac{1}{3}[/tex]π[tex]r^2[/tex]h

V = [tex]\frac{1}{3}[/tex] × π × (1.5)² ×(4)

V =  [tex]\frac{1}{3}[/tex] × π × 2.25 ×(4)

V = 3 π

V = 9.42 cubic inches

Therefore, the maximum volume of a cone is 9.42 cubic inches.

To learn more about the volume of a cone:

brainly.com/question/31211180

#SPJ4

Step-by-step explanation:

Three weeks would be the 21st and would be Sunday too,  then

22 Mon

23 Tues

24 Wed

25 Thur

The trapezoidal approximation for | Vx dx using a regular partition with n=6 is approximately 0.1901.

To compute the trapezoidal approximation for | Vx dx using a regular partition with n=6, we can use the formula:

Tn = (b-a)/n * [f(a)/2 + f(x1) + f(x2) + ... + f(xn-1) + f(b)/2]

where Tn is the trapezoidal approximation, n=6 is the number of partitions, a and b are the limits of integration, and x1, x2, ..., xn-1 are the partition points.

In this case, we have | Vx dx as the function to integrate. Since there are no given limits of integration, we can assume them to be 0 and 1 for simplicity.

So, a=0 and b=1, and we need to find the values of f(x) at x=0, 1/6, 2/6, 3/6, 4/6, and 5/6 to use in the formula.

We can calculate these values as follows:

f(0) = | V0 dx = 0

f(1/6) = | V1/6 dx = V(1/6) - V(0) = sqrt(1/6) - 0 = 0.4082

f(2/6) = | V2/6 dx = V(2/6) - V(1/6) = sqrt(2/6) - sqrt(1/6) = 0.2317

f(3/6) = | V3/6 dx = V(3/6) - V(2/6) = sqrt(3/6) - sqrt(2/6) = 0.1547

f(4/6) = | V4/6 dx = V(4/6) - V(3/6) = sqrt(4/6) - sqrt(3/6) = 0.1104

f(5/6) = | V5/6 dx = V(5/6) - V(4/6) = sqrt(5/6) - sqrt(4/6) = 0.0849

Now we can substitute these values in the formula and simplify:

T6 = (1-0)/6 * [0/2 + 0.4082 + 0.2317 + 0.1547 + 0.1104 + 0.0849/2]
   = 0.1901

Therefore, the trapezoidal approximation for | Vx dx using a regular partition with n=6 is approximately 0.1901.

Learn more about the trapezoidal approximation.

brainly.com/question/29159712

#SPJ11

The solution of the given problem of quadratic equation comes out to be K thus has a value of 63/4.

Regression modelling uses the polynomial solutions x = ax² + b + c=0 for one-variable equations. The First Principle of Algebra states that there can only be one solution because it has an extra order. There are both simple and complex solutions available. As the name suggests, a "non-linear formula" has four variables. This implies that there may only be one squared word. In the equation "ax² + bx + c = 0.

Here,

We know that if and are the zeros of the quadratic equation x²-x+k then:

=> α + β = 1

=> αβ = k

Additionally, we are told that 3 + 2 = 20.

We may find as = 1 - by using the equation + = 1.

By replacing this expression for in terms of in the formula k = a, we obtain:

=> (1 - β)β = k

=> β² - β + k = 0

=> 3α + 2(1 - α) = 20

=> α = 6 - 2β/3

=> (6 - 2β/3)²- (6 - 2β/3) + k = 0

=> 4β² - 36β + 72 + 3k = 0

=> 3(6 - 2β/3) + 2β = 20

=> 4β/3 = 2

=> β = 3/2

=> 4(3/2)² - 36(3/2) + 72 + 3k = 0

When we simplify and find k, we obtain:

=>k = 63/4

K thus has a value of 63/4.

To know more about quadratic equation visit:

brainly.com/question/30098550

#SPJ1

For a snowboard cost that was reduced by 40% by the end of the season, the snowboard cost $450 when it was new.

To find the original cost of the snowboard, let the original price of the snowboard be x.

After a 40% reduction in price, the snowboard costs 60% of its original price, therefore the cost remaining percentage of the original prize times the reduction percentage = the price after reduction:

100% - 40% = 60%

60/100 = 0.6

0.6x = 270

Solving for x to get:

x = 270/0.6 = 450

Therefore, the original price of the snowboard was $450.

Find out more on original price here: https://brainly.com/question/26008313

#SPJ1

Answer:

x=2

Step-by-step explanation:

2x+y=10

3x=y

2x+3x=10

5x=10

x=2

Val's calculation of 1,787.52 m² is incorrect.

What is area of semicircle?

The area of a semicircle is half the area of the corresponding circle. If r is the radius of the semicircle, then the area of the semicircle is:

A(semicircle) = (1/2) π r²

To find the area enclosed by the figure, we need to add the areas of the square and the four semicircles.

The area of the square is:

[tex]A_{square}[/tex] = (56 m)² = 3,136 m²

The area of one semicircle is half the area of the corresponding circle, and the radius of the circle is equal to the side length of the square. Therefore, the area of one semicircle is:

[tex]A_{semicircle}[/tex] = (1/2) π (56/2)²= 1,554.56 m²

The total area enclosed by the figure is:

[tex]A_{total}[/tex] = [tex]A_{square}[/tex]+ 4 [tex]A_{semicircle}[/tex] = 3,136 + 4(1,554.56) = 9,901.44 m²

Therefore, Val's calculation of 1,787.52 m² is incorrect.

To know more about areas visit:

brainly.com/question/16952186

#SPJ9

Question:

Val needs to find the area enclosed by the figure. The figure is made by attaching semicircles to each side of a 56m​-by-56m square. Val says the area is 1,787.52m. Find the area enclosed by the figure. Use 3.14 for π. What error might have Val made?

The Quotient of 4.082 and 10,000 is 0.0004082.

Find the qoutient of  4. 082 and 10,000?

To find the quotient of 4.082 and 10,000, we need to move the decimal point in 4.082 four places to the left, since there are four zeros in 10,000.

So, we get:

4.082 ÷ 10,000 = 0.0004082 is the answer.

Explanation.

To find the quotient of 4.082 and 10,000, we need to divide 4.082 by 10,000. When we divide by a number that is a power of 10, we can simplify the calculation by moving the decimal point to the left as many places as there are zeros in the divisor.

Learn more about decimal:

brainly.com/question/31878113

#SPJ11

Julia will use 10 groups to arrange all of the CDs.

To determine the number of groups Julia will use to arrange all of the CDs, we need to find the greatest common divisor of the numbers 215, 125, and 330.

First, we can check if any of the numbers are divisible by 5:

215 is not divisible by 5

125 is divisible by 5 (125 ÷ 5 = 25)

330 is divisible by 5 (330 ÷ 5 = 66)

Now we divide 125 and 330 by 5:

125 ÷ 5 = 25

330 ÷ 5 = 66

Next, we check if any of the numbers are divisible by 2:

25 is not divisible by 2

66 is divisible by 2 (66 ÷ 2 = 33)

Now we divide 66 by 2:

66 ÷ 2 = 33

Therefore, the greatest common divisor of 215, 125, and 330 is 5 × 2 = 10.

Learn more about arrangement at https://brainly.com/question/24260660

#SPJ11

Answer:

(1/6)π(4^2) - (1/2)(2√3)(4)

= 8π/3 - 4√3 = about 1.4

A general formula that gives all the times when the voltage will be 0 is t = ±√((pπ)/10)

To find the general formula for the times when the voltage will be 0, we need to analyze the given equation: V(t) = 12sin(5t²). Since V(t) represents the voltage at time t, we want to find the values of t for which V(t) = 0. This will occur when the sine function equals 0.

The sine function, sin(x), is equal to 0 when its argument x is a multiple of π. Mathematically, this can be expressed as:

sin(x) = 0 ⟺ x = nπ, where n is an integer (0, ±1, ±2, ...)

In our case, the argument of the sine function is 5t². Thus, we want to find values of t for which:

5t² = nπ, where n is an integer.

Now, let's solve this equation for t:

t² = (nπ)/5

t = ±√((nπ)/5)

Since the question asks for a formula in terms of p, let's define p as an integer such that p = 2n (n can be any integer). Thus, the formula becomes:

t = ±√((pπ)/10)

This formula represents the general sequence of times t (in milliseconds) when the voltage V(t) will be equal to 0. Here, p is an even integer (0, ±2, ±4, ...) representing different instances when the voltage is zero.

Know more about general formula here:

https://brainly.com/question/2492579

#SPJ11

a) The partial derivative of W with respect to T is always positive, which means that increasing T always increases W.

b) Increasing V decreases W if V is greater than

[tex]((0.8T - 0.6215) / 5.71)^{(1/0.16)} .[/tex]

c) The largest domain in which the inequality derived in (b) holds true is:

T > 0.7769. This means that the wind chill formula can be used only for

air temperatures above 0.7769 degrees Fahrenheit.

(a) To show that increasing T always increases W, we need to calculate the partial derivative of W with respect to T and show that it is always positive.

∂W/∂T = [tex]0.6215/0.4275V^{0.16} - (35.75V^{0.16})/0.4275TV^{0.16}^{2}[/tex]

Simplifying this expression, we get:

∂W/∂T = [tex]1.44(0.6215 - 0.0275V^{0.16T}) / V^{0.16}T^{2}[/tex]

Since 1.44 and[tex]V^{0}.16T^{2}[/tex] are always positive, the sign of the partial derivative depends on the sign of[tex](0.6215 - 0.0275V^{0.16T} ).[/tex]

Since 0.0275 is always positive and [tex]V^{0.16T}[/tex] is also always positive, we see that [tex](0.6215 - 0.0275V^{0.16T} )[/tex] is always positive.

(b) To find the conditions under which increasing V decreases W, we need to calculate the partial derivative of W with respect to V and show that it is always negative.

∂W/∂V = [tex](-35.750.16V^{(-0.84)} (35.74+0.6215T-35.75V^{0.16} )-0.6215V^{(-0.16} ))/0.4275TV^{(0.16)}[/tex]

Simplifying this expression, we get:

∂W/∂V = [tex]-0.16(0.6215+5.71V^{0.16-0.8T} ) / TV^{0.84}[/tex]

The sign of the partial derivative depends on the sign of [tex](0.6215+5.71V^{0.16-0.8T} ).[/tex]

If [tex]0.6215+5.71V^{0.16-0.8T} < 0[/tex], then the partial derivative is negative and increasing V decreases W.

Solving this inequality for V, we get:

[tex]V > ((0.8T - 0.6215) / 5.71)^{(1/0.16)}[/tex]

(c) Assuming that W should always decrease when V is increased, we need to find the largest domain in which the inequality derived in (b) holds true.

Since the expression inside the parentheses must be positive for a real solution, we have:

0.8T - 0.6215 > 0

T > 0.7769

for such more question on partial derivative

https://brainly.com/question/25573309

#SPJ11

The value of b in the exponential function fx =1000bx is 1.02.

The problem states that interest is compounded annually, which means that the interest earned in a year is added to the principal amount at the end of the year. Using the given information, we can set up the following equations:

f₁ = 1000(1+b) = 1020

f₂ = 1000(1+b)² = 1040.40

We can solve for b by dividing the second equation by the first equation and taking the square root:

(1+b)² / (1+b) = 1040.40 / 1020

1+b = √1.02

b = 1.02 - 1 = 0.02

Therefore, the value of b is 0.02 or 2%. The exponential function is fx = 1000(1+0.02)ᵗ, where t is the time in years.

To know more about exponential, refer here:

https://brainly.com/question/2193820#

#SPJ11

To find the new salary after a 2.6% increase, we need to add 2.6% of the original salary to the original salary.

2.6% of $29,000 can be calculated as:

(2.6/100) x $29,000 = $754

Therefore, the new salary will be:

$29,000 + $754 = $29,754

So the woman's new salary will be $29,754.

To Know more about refer new salary  here

https://brainly.com/question/29103377#

#SPJ11

The number of random samples, obtained using the formula for combination are 230,300 random samples

A random sample is a subset of the population, such that each member of the subset have the same chance of being selected.

The formula for combinations indicates that we get;

nCr = n!/(r!*(n - r)!), where;

n = The size of the population

r = The sample size

The number of different simple random samples of size 4 that can be obtained from a population of size 50 therefore can be obtained using the above equation by plugging in r = 4, and n = 50, therefore, we get;

nCr = 50!/(4!*(50 - 4)!) = 230300

The number of different ways and therefore, the number of random samples of size 4 that can be selected from a population of 50 therefore is 230,300 random samples.

Learn more on combination here: https://brainly.com/question/25718474

#SPJ1

A sequence of transformations that maps figure 1 onto figure 2 and then figure 2 onto figure 3 include the following: D. a translation followed by a rotation.

In Mathematics and Geometry, a translation can be defined as a type of rigid transformation which moves every point of the object in the same direction, as well as for the same distance.

This ultimately implies that, a translation is a type of rigid transformation  that does not change the orientation of the original geometric figure (pre-image).

In Mathematics, a rotation is a type of transformation which moves every point of the object through a number of degrees around a given point, which can either be clockwise or counterclockwise (anticlockwise) direction.

Read more on transformation here: https://brainly.com/question/15832612

#SPJ1

Complete Question:

Which sequence of transformations maps figure 1 onto figure 2 and then figure 2 onto figure 3?

a reflection followed by a translation

a rotation followed by a translation

a translation followed by a reflection

a translation followed by a rotation

Yes, if you were to randomly survey 20 people at 50 random high schools, it would be considered a random sample because the process involves randomly selecting people from randomly selected high schools, which prevents selection bias..

A random sample is a subset of a population in which every individual has an equal chance of being selected. In this case, the population is the students at the high schools.

By randomly selecting the 50 high schools, you ensure that each school has an equal opportunity to be part of the sample. This helps to prevent selection bias, as no specific schools are deliberately chosen. Moreover, by surveying 20 random people within each selected school, you further eliminate bias, as each student at the school has an equal chance of being selected for the survey.

This random sampling method is beneficial because it helps to obtain a more representative sample of the larger population of high school students. By including diverse schools and students, the survey results can provide more accurate and generalizable insights.

However, it is important to note that even with random sampling, there may still be some limitations, such as sampling error or non-response bias. To minimize these, it is essential to ensure that the sample size is large enough and that survey procedures are properly executed.

Learn more about random sample here: https://brainly.com/question/29444380

#SPJ11

To find the work done by the force, we need to integrate the product of the force and the distance over the range of x.

Given that the force is F(x) = x^2 * 9.24 N and the distance is x, we have:

Work = ∫ F(x) * dx
     = ∫ (x^2 * 9.24) * dx
     = 9.24 ∫ x^2 dx
     = 9.24 * [x^3 / 3]

Evaluating the integral between the limits of 0 and 6 (since the distance is given as x), we get:

Work = 9.24 * [(6^3 / 3) - (0^3 / 3)]
    = 9.24 * (72)
    = 665.28 Joules

Therefore, the work done by the force is 665.28 Joules.

To find the work done by the force, we need to calculate the integral of the force function with respect to distance. Given the force function F(x) = 6x, and the distance x ∈ [0, 2.9], we can set up the integral as follows:

Work = ∫(6x dx) from 0 to 2.9

To find the integral, we'll apply the power rule for integration:

∫(6x dx) = 3x^2 + C

Now, we need to evaluate the definite integral from 0 to 2.9:

Work = (3 * (2.9)^2) - (3 * (0)^2) = 3 * (8.41) = 25.23 N·m

So, the work done by the force is approximately 25.23 N·m.

Learn more about integration here: brainly.com/question/18125359

#SPJ11