-- F = m a ... ==> a = F/m
-- The tension in the rope is 362 N. That same force acts on the asteroid and on the tug, pulling them together.
-- The asteroid's acceleration is 362N / 6240 kg = 0.058 m/s², headed for a point on the rope somewhere between the asteroid and the tug.
-- The tug's acceleration is 362 N / 3220 kg = 0.112 m/s², also headed for a point on the rope somewhere between the tug and the asteroid.
-- So now we have a gap between them, initially 311 m long, closing with a speed that starts at zero and accelerates at 0.170 m/s² .
-- D = (1/2) a T²
311 m = (1/2) (0.170 m/s²) (T²)
T² = 311 m / 0.085 m/s²
T = √(311/0.085) seconds
T = 60.41 seconds
The answer I get is so durn near 60 seconds (1 minute) that it suggests two things to me: ==> That's where the weird numbers of 362N and 311m came from, and ==> there's a good chance that my answer is correct.
Note: It's important to me that you know that 5 points for this one is really cheap and chintzy, and the reason I decided to try it was only to see whether I could.
physics I need help :(
16)
Gamma
rays
X-rays
UV
Infrared
Micro-
waves
Radio
waves
Visible light
Light is an electromagnetic wave and it has a place on the electromagnetic spectrum based on it energy and
wavelength. How does light's energy compare to the energy of other forms of electromagnetic waves?
A)
Light is less energetic than X-rays.
B)
Light is more energetic than X-rays.
Light is the least energetic electromagnetic wave.
D)
Light is the most energetic electromagnetic wave.
Answer:
Light is less energetic than X-rays.
Explanation:
The electromagnetic spectrum refers to the range of wavelengths or frequencies over which electromagnetic radiation extends. It is the entire range of wavelengths or frequencies of electromagnetic radiation extending from gamma rays to the longest radio waves and including visible light. In the electromagnetic spectrum, the entire distribution of electromagnetic radiation is done according to their frequency or wavelength.
The energy of an electromagnetic wave depends on its frequency and wavelength. The shorter the wavelength, the greater the energy of the electromagnetic wave but the larger frequency, the greater the energy of the electromagnetic wave.
X-rays has a frequency of about 1×10^20 Hz compared to visible light of frequency of about 1×10^15 Hz. Hence X-rays, having a larger frequency, is more energetic than visible light.
¿Cuantos metros recorre una motocicleta en un segundo si circula a una velocidad de 90km/h?
Answer:
La motocicleta recorre 25 metros en 1 segundo si circula a una velocidad de 90 km/h
Explanation:
La velocidad es una magnitud que expresa el desplazamiento que realiza un objeto en una unidad determinada de tiempo, esto es, relaciona el cambio de posición (o desplazamiento) con el tiempo.
Siendo la velocidad es el espacio recorrido en un período de tiempo determinado, entonces 90 km/h indica que en 1 hora la motocicleta recorre 90 km. Entonces, siendo 1 h= 3600 segundos (1 h=60 minutos y 1 minuto=60 segundos) podes aplicar la siguiente regla de tres: si en 3600 segundos (1 hora) la motocicleta recorre 90 km, entonces en 1 segundo ¿cuánta distancia recorrerá?
[tex]distancia=\frac{1 segundo*90 km}{3600 segundos}[/tex]
distancia= 0.025 km
Por otro lado, aplicas la siguiente regla de tres: si 1 km es igual a 1,000 metros, ¿0.025 km cuántos metros son?
[tex]distancia=\frac{0.025 km*1,000 metros}{1 km}[/tex]
distancia= 25 metros
La motocicleta recorre 25 metros en 1 segundo si circula a una velocidad de 90 km/h
La cantidad de metros que recorre una motocicleta en un segundo si viaja a una velocidad de 90 km / h es de 25 m / s.
Para obtener la velocidad de la motocicleta en un segundo, necesitaremos convertir 90 km / h en metros por segundo
Usando la tasa de conversión;
1000 m = 1 km
1 hora = 3600 segundos
[tex]\frac{90km}{hr} = \frac{90km \times 1000 m}{1km \times 3600s} \\\\\frac{90km}{hr} = \frac{90,000 m}{3600s} =25m/s \\[/tex]
Esto muestra que la cantidad de metros que recorre una motocicleta en un segundo si viaja a una velocidad de 90 km / h es de 25 m / s.
Obtenga más información aquí: https://brainly.com/question/13136984
What percent of our solar system's mass is in the sun?
Answer:
99.8
Explanation:
most massive the sun is at the center of the universe
Potential difference is measured in which units?
volts
amps
currents
watts
Answer:
Potential difference is measured in volts
Explanation:
The standard metric unit on electric potential difference is the volt, abbreviated V and named in honor of Alessandro Volta. One Volt is equivalent to one Joule per Coulomb.
Answer:
Your answer is A.) volts
Explanation:
The red giant Betelgeuse has a surface temperature of 3000 K and is 600 times the diameter of our sun. (If our sun were that large, we would be inside it!) Assume that it radiates like an ideal blackbody.a) If Betelgeuse were to radiate all of its energy at the peak-intensity wavelength, how many photons per second would it radiate?b) Find the ratio of the power radiated by Betelgeuse to the power radiated by our sun (at 5800 K).
Answer:
Explanation:
a )
Radius of the sun = .69645 x 10⁹ m .
600 times = 600 x .69645 x 10⁹ m
= 4.1787 x 10¹¹ m .
surface area A = 4π (4.1787 x 10¹¹)²
= 219.317 x 10²²
energy radiated E = σ A Τ⁴
= 5.67 x 10⁻⁸ x 219.317 x 10²² x (3000)⁴
= 100695 x 10²⁶ J
To know the wavelength of photon emitted
[tex]\lambda_mT= b[/tex]
[tex]\lambda_m= \frac{b}{T}[/tex]
= 2.89777 x 10⁻³ / 3000
= 966 nm
= 1275 /966 eV
1.32 x 1.6 x 10⁻¹⁹ J
= 2.112 x 10⁻¹⁹ J
No of photons radiated = 100695 x 10²⁶ / 2.112 x 10⁻¹⁹
= 47677.5 x 10⁴⁵
= .476 x 10⁵⁰ .
b )
energy radiated by our sun per second
E₂ = σ A 5800⁴
energy radiated by Betelgeuse per second
E₁ = σ x 600²A x 3000⁴
E₁ / E₂ = σ x 600²A x 3000⁴ / σ A 5800⁴
= 36 X 10⁴ x 3⁴ x 10¹² / 58⁴ x 10⁸
= 25.76 x 10⁸ x 10⁻⁵
= 25760 times .
A student is given a small object that is hanging from a ring stand on a nylon thread. The student attempts to charge the object electrically in several ways. Based upon his results, he concludes the object is made of an insulating material. Which set of results must he have collected?
A. The object could be charged only by contact.
B. The object could be charged by either contact or induction.
C. The object could be charged by either contact or polarization.
D. The object could be charged only by polarization.
Answer:(a)
Explanation:
Student must have known that insulators can only be charged when they are rubbed against each other. In this process, one becomes electrically negative while other becomes electrically positive such that both have the same magnitude. The one which gains electrons becomes electrically negative due to the transfer of electrons while others lose the electron becomes positive due to the transfer of an electron to another body.
A projectile is launched on the Earth with a certain initial velocity and moves without air resistance. Another projectile is launched with the same initial velocity on the Moon, where the acceleration due to gravity is one-sixth as large. How does the maximum altitude of the projectile on the Moon compare with that of the projectile on the Earth?
With smaller gravitational forces and therefor less vertical acceleration, the projectile launched on the moon ... with the same initial speed and direction ...
-- climbs faster,
-- spends more time climbing,
-- reaches a higher peak,
-- falls slower,
-- spends more time falling, and
-- covers more horizontal distance
than the projectile launched on the Earth.
This is not because of air resistance. It would be true even if there were no air resistance on the Earth. It's entirely a gravity thing.
Question 10
Air with a density of 1.20 kg/m3 flows through a 75.0 cm diameter pipe with a velocity of 2.00 m/s. What is the mass flow rate?
Answer:
75.0 cm
Explanation:
becouse i don,t no the right answer
You are helping your friend prepare for the next skateboard exhibition by determining if the planned program will work. Your friend will take a running start and then jump onto a heavy-duty 13-lb stationary skateboard. The skateboard will glide in a straight line along a short, level section of track, then up a curved concrete wall. The goal is to reach a height of at least 10 feet above the starting point before coming back down the slope. Your friend's maximum running speed to safely jump on the skateboard is 24 feet/second. Your friend weighs 155-lbs. What is the height hf that your friend will reach according to his plan?
Answer:
8.3 feet
Explanation:
The kinetic energy of the system on the ground is ...
KE = Σ(1/2)(mv^2) = (1/2)(155)(24^2) +(1/2)(13)(0^2) = 44640 lb·ft²/s²
The potential energy at the highest point is the same:
PE = mgh
44640 = (155 +13)(32)h
h = 44640/5376 = 8.30 . . . . feet
_____
We haven't worried too much about the conversion between pounds mass and pounds force. Whatever factor may be involved will divide out when computing the maximum height. We have used g=32 ft/s².
__
To achieve a 10 ft height, the running speed would need to be 26.34 ft/s, about 10% higher.
A glass sphere carrying a uniformly distributed charge of +Q is surrounded by an initially neutralspherical plastic shell. (Assume the charge +Q is uniformly distributed across thesurface of the glass sphere.)
Required:
a. Qualitatively, indicate the polarization of the plastic.
1. The plastic will polarize so as to have positive charge +Qon its inner surface and negativecharge −Q on its outer surface.
2. Dipoles in the plastic will polarize and orient themselves perpendicular to the radial electricfield due to the charge +Q.
3. Dipoles in the plastic will polarize and orient themselves radially, with their negativeends pointing toward the center.
4. Dipoles in the plastic will polarize and orient themselves radially, with their positiveendspointing toward the center.
b. Qualitatively, indicate the polarization of the inner glass sphere. Explain briefly.A net charge −Q from the dipoles will be uniformly distributed through the volume of the sphere.
1. There will be no polarization inside the glass sphere since the net electric field there iszero.
2. Dipoles in the glass will polarize and orient themselves perpendicular to the radial electricfield due to the charge +Q.
3. Dipoles in the glass will polarize and orient themselves radially, with their positive endspointing toward the center.
c. Is the electric field at location Poutside the plastic shell larger, smaller, or the same as itwould be if the plastic weren't there? Explain briefly.
1. Larger, because a net positive charge is created from the polarization of the shell.
2. Larger, because the positive charges displaced during polarization are closer to P than thenegative charges.
3. Smaller, because the negative charges displaced during polarization are closer to Pthanthe positive charges.
4. Smaller, because the plastic shell shields location Pfrom the charge +Q, such that the netfield at Pis zero.
5. The same, because no net charge is created from the polarization of the field.
Answer:
(A) 3. Dipoles in the plastic will polarize and orient themselves radially, with their negativeends pointing toward the center
(B) 2. There will be no polarization inside the glass sphere since the net electric field there is zero.
Explanation: charges are only distributed on the surface of the charged hollow conductor. The core must have zero charge.
(C) 2. Larger, because the positive charges displaced during polarization are closer to P than thenegative charges.
A sound level of 96 dB is how many times as intense as one of 90 dB?
Answer:
A sound level of 96 dB is 4 times as intense as one of 90 dB
Explanation:
The formula of the intensity level of sound in decibels is given as follows:
Intensity Level = 10 log₁₀(I/I₀)
where,
I = Intensity of Sound
I₀ = Reference Intensity Level = 10⁻¹² W/m²
Therefore, for 96 dB sound level:
96 = 10 log₁₀(I₁/10⁻¹²)
log₁₀(I₁/10⁻¹²) = 96/10
I₁/10⁻¹² = 10^9.6
I₁ = (10⁻¹²)(4 x 10⁹)
I₁ = 0.004 W/m²
For 90 dB sound level:
90 = 10 log₁₀(I₂/10⁻¹²)
log₁₀(I₂/10⁻¹²) = 90/10
I₂/10⁻¹² = 10^9
I₂ = (10⁻¹²)(10⁹)
I₂ = 0.001 W/m²
Therefore,
I₁/I₂ = 0.004/0.001
I₁ = 4 I₂
Hence, the sound level of 96 dB is 4 times as intense as one of 90 dB.
What is the resistance of a circuit with a voltage of 10 V in a current of 5 A use almond law to create the resistance
Answer:
2Ω
Explanation:
Ohm's law:
V = IR
10 V = (5 A) R
R = 2 Ω
1. (a) The battery on your car has a rating stated in ampere-minutes which permits you to
estimate the length of time a fully charged battery could deliver any particular current
before discharge. Approximately how much energy is stored by a 50 ampere-minute 12
volt battery?
Answer:
Energy is stored by a 50 ampere-minute 12
volt battery is approximately = 36,000 J = 36 kJ
Explanation:
Power in electrical circuits is given as
Power = IV
But power generally is defined as energy expended per unit time
Power = (Energy/time)
Energy = Power × Time
Energy = IV × Time
Energy = (I.t × V)
I.t = 50 Ampere-minute = 50 × 60 = 3000 Ampere-seconds
V = 12 V
Energy = 3,000 × 12 = 36,000 J = 36 kJ
Hope this Helps!!!
Blocks of mass 10, 30, and 90 kg are lined up from left to right in that order on a frictionless surface so each block is touching the next one. A rightward-pointing force of magnitude 32 N is applied to the left-most block. 1) What is the magnitude of the force that the left block exerts on the middle one
Answer:
32N
Explanation:
The Left force exerts an opposite horizontal force of 32N on the middle object
In order to determine the coefficients of friction between rubber and various surfaces, a student uses a rubber eraser and an incline. In one experiment, the eraser begins to slip down the incline when the angle of inclination is 35.6° and then moves down the incline with constant speed when the angle is reduced to 30.8°. From these data, determine the coefficients of static and kinetic friction for this experiment.
Answer:
The coefficients of static and kinetic friction for this experiment are 0.716 and 0.596, respectively.
Explanation:
The Free Body Diagram associated with the experiment is presented as attachment included below.
Friction is a contact force that occurs as a reaction against any change in state of motion, which is fostered by gravity.
Normal force is another contact force that appears as a reaction to the component of weight perpendicular to the direction of motion. Let consider a framework of reference consisting in two orthogonal axes, one being parallel to the direction of motion (x-axis) and the other one normal to it (y-axis). Equations of motion are described herein:
[tex]\Sigma F_{x} = W \cdot \sin \theta - f = 0[/tex]
[tex]\Sigma F_{y} = N - W \cdot \cos \theta = 0[/tex]
Where:
[tex]W[/tex] - Weight of the eraser, measured in newtons.
[tex]f[/tex] - Friction force, measured in newtons.
[tex]N[/tex] - Normal force, measured in newtons.
[tex]\theta[/tex] - Angle of the incline, measured in degrees.
The maximum allowable static friction force is:
[tex]f = \mu_{s} \cdot N[/tex]
Where:
[tex]\mu_{s}[/tex] - Coefficient of static friction, dimensionless.
[tex]N[/tex] - Normal force, measured in newtons.
Likewise, the kinetic friction force is described by the following model:
[tex]f = \mu_{k} \cdot N[/tex]
Where:
[tex]\mu_{k}[/tex] - Coefficient of static friction, dimensionless.
[tex]N[/tex] - Normal force, measured in newtons.
And weight is equal to the product of the mass of eraser and gravitational constant ([tex]g = 9.807\,\frac{m}{s^{2}}[/tex])
In this exercise, coefficients of static and kinetic friction must be determined. First equation of equilibrium has to be expanded and coefficient of friction cleared:
[tex]m\cdot g \cdot \sin \theta - \mu\cdot N = 0[/tex]
[tex]\mu = \frac{m\cdot g \cdot \sin \theta}{N}[/tex]
But [tex]N = m\cdot g \cos \theta[/tex], so that:
[tex]\mu = \tan \theta[/tex]
Now, coefficients of static and kinetic friction are, respectively:
[tex]\mu_{s} = \tan 35.6^{\circ}[/tex]
[tex]\mu_{s} \approx 0.716[/tex]
[tex]\mu_{k} \approx \tan 30.8^{\circ}[/tex]
[tex]\mu_{k} \approx 0.596[/tex]
The coefficients of static and kinetic friction for this experiment are 0.716 and 0.596, respectively.
A certain metal with work function of Φ = 1.7 eV is illuminated in vacuum by 1.4 x 10-6 W of light with a wavelength of λ = 600 nm. 1)How many photons per second, N, are incident on the metal? N = photons per second Submit 2)What is KEmax, the maximum kinetic energy of the electron that is emitted from the metal? KEmax = eV
Answer:
1) n = 4.47*10^12 photons
2) K = 0.25 eV
Explanation:
This is a problem about the photoelectric effect.
1) In order to calculate the number of photons that impact the metal, you take into account the power of the light, which is given by:
[tex]P=\frac{E}{t}=1.4*10^{-6}\frac{J}{s}[/tex] (1)
Furthermore you calculate the energy of a photon with a wavelength of 600nm, by using the following formula:
[tex]E_p=h\frac{c}{\lambda}[/tex] (2)
c: speed of light = 3*10^8 m/s
h: Planck's constant = 6.626*10^-34 Js
λ: wavelength = 600*10^-9 m
You replace the values of the parameters in the equation (2):
[tex]E_p=(6.626*10^{-34}Js)\frac{3*10^8m/s}{600*10^{-9}m}=3.131*10^{-19}J[/tex]
Next, you calculate the quotient between the power of the light (equation (1)) and the energy of the photon:
[tex]n=\frac{P}{E_p}=\frac{1.4*10^{-6}J/s}{3.131*10^{-19}J}=4.47*10^{12}photons[/tex]
The number of photons is 4.47*10^12
2) The kinetic energy of the electrons emitted by the metal is given by the following formula:
[tex]K=E_p-\Phi[/tex] (3)
Ep: energy of the photons
Φ: work function of the metal = 1.7 eV
You first convert the energy of the photons to eV:
[tex]E_p=3.131*10^{-19}J*\frac{6.242*10^{18}eV}{1J}=1.954eV[/tex]
You replace in the equation (3):
[tex]K=1.95eV-1.7eV=0.25eV[/tex]
The kinetic energy of the electrons emitted by the metal is 0.25 eV
(1). The Number of photons per second is,[tex]4.23*10^{12}[/tex]
(2). The maximum kinetic energy of the electron is 0.37eV.
(1). The power of light is given as,
[tex]P=1.4*10^{-6}W[/tex]
Energy is given as,
[tex]E=\frac{hc}{\lambda} =\frac{6.626*10^{-34}*3*10^{8} }{600*10^{-9} } \\\\E=3.313*10^{-19} Joule\\\\E=\frac{3.313*10^{-19}}{1.6*10^{-19} }=2.07eV[/tex]
Number of photons per second is,
[tex]N=\frac{P}{E}=\frac{1.4*10^{-6} }{3.313*10^{-19} } =4.23*10^{12}[/tex]
(2). the maximum kinetic energy of the electron is,
[tex]K.E=E-\phi[/tex]
Where [tex]\phi[/tex] is work function.
[tex]K.E=2.07-1.7=0.37eV[/tex]
Learn more:
https://brainly.com/question/12337396
The density of atmosphere (measured in kilograms/meter3) on a certain planet is found to decrease as altitude increases (as measured from the planet's surface). What type of relationship exists between the altitude and the atmospheric density, and what would the atmospheric density be at an altitude of 1,291 kilometers?
A.
inverse plot, 0.45 kilograms/meter3
B.
inverse plot, 0.51 kilograms/meter3
C.
quadratic plot, 1.05 kilograms/meter3
D.
inverse plot, 1.23 kilograms/meter3
E.
inverse plot, 0.95 kilograms/meter3
' A ' looks like the best choice.
Answer:
B. inverse plot, 0.51 kilograms/meter3
Explanation:
Which factor caused higher oil prices to directly lead to inflation?
It increased demand for cars, leading to higher automobile prices.
Companies passed on production and transportation costs to consumers.
The government began to print more money.
Gas prices declined too quickly, leading to oversupply
Answer: B, Companies passed on production and transportation costs to consumers
Explanation:
A higher oil price occurred when companies passed on production and transportation costs to consumers.
Cause of high price of oilThe oil producing companies spend so much money in producing crude oil from the reservoirs to the surface. They also spend money in processing and transporting the crude oil to the end users or consumers.
The final price of the oil depends on the total amount spent by these companies in producing the hydrocarbons.
Thus, a higher oil price occurred when companies passed on production and transportation costs to consumers.
Learn more about inflations here: https://brainly.com/question/1082634
If a cart of 8 kg mass has a force of 16 newtons exerted on it, what is its acceleration?
Answer:
Explanation:
From Newton's 2nd Law,
F = m×a
Where F is Force
m is mass
a is acceleration
Hence a= F/m
a= 16/8= 2m/s2
What is the highest point at which weather will generally occur?
Answer:
At thestratosphere: it 20- 25km
The International Space Station is about 90 meters across and about 380 kilometers away. One night t appears to be the same angular size as Jupiter. Jupiter is 143,000 km in size. Use serxa to figure out how far away Jupiter is in AU Note: 1 AU= 1.5 x 10-km
a) 6.0 x 10 Au
b) 4.0 AU
c) 9.1 x 1010 AU
d) 4.0 x 10 AU
Complete Question
The complete question is shown on the first uploaded image
Answer:
The distance is [tex]r_2 = 4 \ AU[/tex]
Explanation:
From the question we are told that
The size of Jupiter is [tex]s_2 = 143,000 \ km[/tex]
The length of the International Space Station is [tex]r_1 = 380\ km[/tex]
The size of the International Space Station is [tex]s_1 = 90 \ m =0.09 \ km[/tex]
The angular size where the same one night and this angular size is mathematically represented as
[tex]\theta = \frac{s}{r}[/tex]
Since [tex]\theta[/tex] is constant
[tex]\frac{s_1}{r_1} = \frac{s_2}{r_2}[/tex]
substituting values
[tex]\frac{0.09}{380} = \frac{143000}{r_2}[/tex]
=> [tex]r_2 = 6.04 * 10^{9} \ km[/tex]
Now we are told to convert to AU and 1 AU [tex]= 1.5 * 10^8 \ km[/tex]
So
[tex]r_2 = \frac{6.04 * 10^8}{1.5*10^{8}}[/tex]
[tex]r_2 = 4 \ AU[/tex]
A scuba diver and her gear displace a volume of 68.5 L and have a total mass of 71.8 kg . Part A What is the buoyant force on the diver in sea water? FB = nothing N Request Answer Part B Will the diver sink or float?
Answer:
A) Fb = 671.3 N
B) The diver will sink.
Explanation:
A)
The buoyant force applied on an object by a fluid is given by the following formula:
Fb = Vρg
where,
Fb = Buoyant Force = ?
V = Volume of the water displaced by the object = 68.5 L = 0.0685 m³
ρ = Density of Water = 1000 kg/m³
g = 9.8 m/s²
Therefore,
Fb = (0.0685 m³)(1000 kg/m³)(9.8 m/s²)
Fb = 671.3 N
B)
Now, in order to find out whether the diver sinks or float, we need to find weight of the diver with gear.
W = mg = (71.8 kg)(9.8 m/s²)
W = 703.64 N
Since, W > Fb. Therefore, the downward force of weight will make the diver sink.
The diver will sink.
An arrow is shot from a height of 1.55 m toward a cliff of height H. It is shot with a velocity of 26 m/s at an angle of 60° above the horizontal. It lands on the top edge of the cliff 3.99 s later.
(a) Draw a sketch of the given example. Include the x-y coordinate system.
(b) What is the height of the cliff?
(c) What is the maximum height reached by the arrow along its trajectory?
(d) What is the arrow's impact speed just before hitting the cliff?
Answer:
Explanation:
vertical component of the velocity of arrow
= 26 sin 60 = 22.516 m
height reached by it after 3.99 s
h = ut - 1/2 g t²
= 22.516 x 3.99 - .5 x 9.8 x 3.99²
= 89.83 - 78
11.83 m
Total height of cliff = 1.55 + 11.83
= 13.38 m
c ) maximum height covered s
v² = u² - 2gs
0 = u² - 2gs
s = u² / 2g
= 22.516² / 2 x 9.8
= 25.86
maximum height reached
= 25.86 + 1.55
= 27.41 m
d )
vertical speed after 3.99 s
v = u - gt
= 22.516 - 9.8 x 3.99
= -16.586
Horizontal component will remain unchanged
Horizontal component = 26 cos 60
= 13 m /s
Resultant of two velocities
= √ 13²+ 16.568²
= 21 m /s
If a light is moved twice (2x) as far from a surface, the area the light covers is ___ as big.
- 2x
- 1/4
- 1/2
- 4x
Answer:
The correct option is;
- 4x
Explanation:
From the inverse square law, as the distance from the source of a physical quantity increases, the intensity of the source is spread over an area proportional to the square of the distance of the object from the source
The inverse square law can be presented as follows;
[tex]I = \dfrac{S}{4\times \pi \times r^2 }[/tex]
As the distance, r, increases, the surface it covers also increases by the power of 2
Therefore, where the distance increases from r to 2·r, we have;
When, I, remain constant
[tex]I = \dfrac{4\times S}{4\times \pi \times (2\cdot r)^2 } = I = \dfrac{4\times S}{4\times 4\times \pi \times r^2 } = \dfrac{S}{4\times \pi \times r^2 }[/tex]
The surface increases to 4·S by the inverse square law
Therefore, the correct option is 4 × x.
Identify the five categories of stressors.
Answer:
The five kinds of stressors are:
Acute time-limited
Brief naturalistic
Stressful events sequences
Chronic
Distant
Explanation:
yeah
A 1,269 kg rocket is traveling at 413 m/s with 2,660 kg of fuel on board. If the rocket fuel travels at 1,614 m/s relative to the rocket, what is the rockets final velocity after it uses half of its fuel?
Answer:
About 2104m/s
Explanation:
[tex]F=ma \\\\F=\dfrac{2660kg}{2}\cdot 1614m/s=2,146,620N \\\\2,146,620N=1,269kg\cdot a \\\\a\approx 1691m/s \\\\v_f=v_o+at=413m/s+1691m/s=2104m/s[/tex]
Hope this helps!
Find another example of separation that is used to extract a material made useful by humans. Describe the process of separation and what we use the separated component for. (4-6 sentences)
If anyone would answer this I’ll answer ur questions for return!
Please and thank you!
Answer:
Salt
Explanation:
Salt plays a crucial role in maintaining human health. It is the main source of sodium and chloride ions in the human diet. Sodium is essential for the nerve and muscle function and is involved in the regulation of fluids in the body. Sodium also plays a role in the body's control of blood pressure and volume. Salt is harvested by seawater or brine is fed into large ponds of water and is drawn out through natural evaporation which allows the salt to be subsequently harvested.
Have a good day and stay safe!
Your new toaster has two separate toasting units, each of which consumes 600 watts of power when it is in use. When you operate one unit, a current of 5 amperes flowsthrough the wiring in your home and the wires waste about 1 watt of power handling that current. If you operate both toasting units at once, your toaster consumes 1200 watts and the current flowing through the wiring in your home doubles to 10 amperes. How much power will the wires in your home waste now
Answer:
1.92 Watt lost
Explanation:
Power rating of each toaster = 600 Watts
Current that flows = 5 Amperes
Wasted power = 1 Watt
Voltage of toaster can be gotten from P = [tex]I^{2}[/tex]R
where I = current
and R = Resistance
600 = [tex]5^{2}[/tex] x R
R = 600/25 = 24 Ohms.
According to joules loss due to heating of wire
Power loss P ∝ [tex]I^{2}[/tex]R
imputing values,
1 ∝ [tex]5^{2}[/tex] x 24
1 ∝ 600
to remove the proportionality sign, we introduce a constant k
1 = 600k
k = 1/600 = 0.00167
For the case where the current is doubled to 10 ampere, as the power doubles to 1200 W.
The resistance across the wire becomes
1200 = [tex]10^{2}[/tex]R
R = 1200/100 = 12 Ohms
power loss P = k x [tex]I^{2}[/tex]R
P = 0.0016 x [tex]10^{2}[/tex] x 12
P = 1.92 Watt lost
This question involves the concepts of power, current, and resistance.
The power wasted by the wires in the home for two units will be "4 watt".
POWER WASTAGEThe power wasted by the wires can be given in terms of current and resistance by the following formula:
[tex]P=I^2R\\\\\frac{P}{I^2}=R=Constant\\\\\frac{P_1}{I_1^2}=\frac{P_2}{I_2^2}[/tex]
where,
P₁ = Power wasted for one unit = 1 wattI₁ = current through wires for one unit = 5 AR = Resistance of wires = constantP₂ = Power wasted for two units = ?I₂ = Current through wires for two units = 10 ATherefore,
[tex]\frac{1\ watt}{(5\ A)^2}=\frac{P_2}{(10\ A)^2}\\\\P_2=\frac{(1\ watt)(100\ A^2)}{25\ A^2}[/tex]
P₂ = 4 watt
Learn more about power here:
https://brainly.com/question/7963770
I need help physics
