Add these measurements, using significant digit rules:
44.2+0.123=

Answer:

refer to attachment

Explanation:

hope it will helps u

Answer: 5cm

Explanation:

Answer:

0.399 rev/s

Explanation:

Given that,

The diameter of a tornado, d = 74 m

Radius, r = 37 m

Linear velocity, v = 335 km/h = 93.05 m/s

We need to find the angular velocity in revolutions per second. Let it is [tex]\omega[/tex]. The relation between angular velocity and linear velocity is as follows :

[tex]v=r\omega\\\\\omega=\dfrac{v}{r}\\\\\omega=\dfrac{93.0556}{37}\\\\\omega=2.51\ rad/s[/tex]

or

[tex]\omega=\dfrac{2.51}{2\pi}\\\\\omega=0.399\ rev/s[/tex]

So, the angular velocity of the blade is 0.399 rev/s.

Answer:

How long do you jump (sec) ?

Explanation:

Answer:

I am 15th in my state for 55m hurdles with a time of 10.4 seconds

Explanation:

BAM

Answer: 44 m per minute

Explanation:

Answer:wrong. Jts not velocity. Its period.

Explanation:

Took the test

Answer:

6.601 N/m.

Explanation:

Generally, the force on a wire carrying current in a magnetic field can be determined by:

F = BIL Sinθ

where: F is the force, B is the value of the magnetic field, I is the value of current in the wire and θ is the angle between the direction of current and magnetic field.

For force per meter of length, we have;

[tex]\frac{F}{L}[/tex] = BI Sinθ

Given: I = 8.05 A, B = 0.82 T and θ = [tex]90^{o}[/tex](since they are perpendicular).

Then;

[tex]\frac{F}{L}[/tex] = 0.82 x 8.05 x Sin [tex]90^{o}[/tex]

  = 6.601

  = 6.601 N/m

the force per meter length is 6.601 N/m.

The required magnitude of force per meter of wire is of 6.601 N/m.

Given data:

The magnitude of current in a wire is, I = 8.05 A.

The strength of magnetic field is, B = 0.82 T.

We known that, in a magnetic field there is always a force acting on a wire kept in the region. This force is known as magnetic force, and the expression for the magnetic force is given as,

[tex]F = B \times I \times L \times sin \theta[/tex]

Now,

For the force per unit length, and current being perpendicular to magnetic field,

[tex]\dfrac{F}{L} = B \times I \times sin90\\\\\dfrac{F}{L} = 0.82 \times 8.05 \times sin90\\\\\dfrac{F}{L} = 6.601 \;\rm N/m[/tex]

Thus, we can conclude that the required magnitude of force per meter of wire is of 6.601 N/m.

Learn more about the magnetic force here:

https://brainly.com/question/9633443

We know, for single slit :

[tex]y =\dfrac{ n\lambda L}{a}\\\\\lambda = \dfrac{ya}{nL}[/tex]       ...1)

[tex]y = 1.4\ mm = 1.4 \times 10^{-3}\ m[/tex]

n = 2

L = 89 cm = 0.89 m

[tex]a=7.1\times 10^{-4}\ m[/tex]

Putting all these in equation 1), we get :

[tex]\lambda = \dfrac{ya}{nL}\\\\\lambda = \dfrac{1.4\times 10^{-3}\times 7.1\times 10^{-4}}{2\times 0.89 }\\\\\lambda = 5.584 \times 10^{-7}\ m[/tex]

Therefore, wavelength of the incident light is [tex]5.584 \times 10^{-7}\ m[/tex] or 558.4 nm.

Hence, this is the required solution.

Answer:position relative to the starting point

Explanation:

Answer:

(a) [tex]Probability = 0.7599[/tex]

(b) [tex]Probability = 0.2646[/tex]

Explanation:

Represent losing with L and winning with W.

So:

[tex]L = 0.7[/tex] --- Given

[tex]n = 4[/tex]

Probability of winning would be:

[tex]W = 1 - L[/tex]

[tex]W = 1 - 0.7[/tex]

[tex]W = 0.3[/tex]

The question illustrates binomial probability and will be solved using the following binomial expansion;

[tex](L + W)^4 = L^4 + 4L^3W + 6L^2W^2 + 4LW^3 + W^4[/tex]

So:

Solving (a): Winning at least 1

We look at the above and we list out the terms where the powers of W is at least 1; i.e., 1,2,3 and 4

So, we have:

[tex]Probability = 4L^3W + 6L^2W^2 + 4LW^3 + W^4[/tex]

Substitute value for W and L

[tex]Probability = 4 * 0.7^3*0.3 + 6*0.7^2*0.3^2 + 4*0.7*0.3^3 + 0.3^4[/tex]

[tex]Probability = 0.7599[/tex]

Hence, the probability of her winning at least one is 0.7599

Solving (a): Wining exactly 2

We look at the above and we list out the terms where the powers of W is exactly 2

So, we have:

[tex]Probability = 6L^2W^2[/tex]

Substitute value for W and L

[tex]Probability = 6*0.7^2*0.3^2[/tex]

[tex]Probability = 0.2646[/tex]

Hence, the probability of her winning exactly two is 0.2646

Answer:

Moment of inertia = 0.3862kg-m²

Explanation:

2.00x10³

2.80cm

145 rad

r = r⊥ x F

F is an applied force

r⊥ is the distance between the applied force and axis

Force exerted = 2.00x10³

r⊥ = 2.8cm = 0.028m

Alpha = 145rad/s²

r = 0.028m x 2.00x10³

r = 56.0N-m

To get the moment of inertia

56.0N-m² = (145rad/s²) x I

The I would be:

I = (56.0N-m²)/(145rad/s²)

I = 56/145

= 0.3862Kg-m²

This is the moment of inertia.

Thank you!

(a)to find voltage of battery we use the wire containg 4 ohm resistor and 3 ohm resistor

the voltage of 4ohm = Ri=4x1.5=6V

the voltage of 3 ohm = Ri=3x1.5=4.5v

since voltage is additive in series then Voltage of batteries = 4.5+6=10.5V

(b) the currrent flowing in 20 ohm resistor is the same as 8 ohm resistor so

Voltage of 8 ohm + voltage of 20 ohm= 10.5

8i+20i=10.5

28i=10.5

i=0.375 A

Answer: When frequency increases more wave crests pass a fixed point each second. That means the wavelength shortens. So, as frequency increases, wavelength decreases. The opposite is also true—as frequency decreases, wavelength increases.

The frequency and wavelength of a wave are related. When frequency increases more wave crests pass a fixed point each second. ... So, as frequency increases, wavelength decreases. The opposite is also true—as frequency decreases, wavelength increases.

uncountable the number of times that something happens during a period of time. frequency of: Changes in sea temperature will increase the frequency of hurricanes. with increasing frequency (=more often): Accidents occur here with increasing frequency.

Explanation:

First of all, this isn't physics. But, here's the answer:

1 gram is a 1000 milligram and 250 milligram is 250 * 0.001 g which is 0.25 gram.

Since 1 kg is 1000 g, we divide 1000 by 0.25 and we get 1000 * 4 which is 4000.

There are [tex]4000[/tex] tablets inside the bottle.

Answer:

Explanation:

Given:-

Initial velocity (u) = 0m/s

Final velocity (v) = 85m/s

Distance covered (s) = 36m

To Find:-

Acceleration of the object (a)

Solution:-

By using 3rd equation of motion

→ v² = u² +2as

Substitute the value we get

→ 85² = 0² +2×a×36

→ 7225 = 0 + 72 ×a

→ a = 7225/72

→ a = 100.34m/s²

∴ The acceleration of the object is 100.34m/s²

Additional Information!!

The rate of change of velocity at per unit time is called acceleration .

✧ SI unit of acceleration is m/s²

✧ It is vector Quantity ( both magnitude and directio

Answer:

Explanation:

This question is incomplete. However, it should be noted that for an object to float in a liquid, the density of the object must be less dense than the liquid. This causes the weight force of the object to be balanced by the upthrust force of the liquid. Thus, when the object is more dense than the liquid, the object sinks.

One thing the floating objects will have in common is that they are less dense than the liquid in which they are floating.

NOTE that the floating of an object can be dependent on size and shape (which affects the upthrust force) also.

We are given:

Homer the Astronaut:

Mass of Homer the astronaut(m1) = 200 kg

initial velocity of Homer the astronaut(u1) = 5 m/s

Larry the Pal:

Mass of Larry the Pal (m2) = 150 kg

initial velocity of Larry the Pal (u2) = 0 m/s

Since they will move together after the collision, they will have the same velocity:

v1 = v2 = V

Solving for the Final velocity:

from the law of conservation of momentum:

m1u1 + m2u2 = m1v1 + m2v2

since v1 = v2 = V:

m1u1 + m2u2 = V(m1 + m2)

replacing the variables with the given values

200 * 5 + 150 * 0 = V(200 + 150)

1000 = 350V

V  = 1000 / 350

V = 2.86 m/s

Answer: what’s the answer

Explanation:

Answer:

A: thermal energy

Conduction involves the transfer of electric charge or thermal energy due to the movement of particles. So, the correct option is 1.

Heat transfer is defined as the process of transferring heat from one body to another based on the temperature difference between them.

Here,

There are several mechanisms of heat transfer such as conduction, convection, radiation, etc.

Conduction or thermal conduction is a commonly used mechanism for heat transfer.

Conduction is defined as the process by which heat is transferred from one body to other in contact with each other. In conduction, the heat flows from the hotter body to the surface of the colder body which is in contact with it.

This property or ability of the body to conduct heat or thermal energy is known as its thermal conductivity.

Conductions requires a temperature gradient to transfer the heat. The temperature difference between the bodies leads to the heat flow between them.

Conduction occurs mostly in solids and liquids, in where the intermolecular distance between the particles is higher than that in gases.

Hence,

Conduction involves the transfer of electric charge or thermal energy due to the movement of particles.

To learn more about heat transfer, click:

https://brainly.com/question/13433948

#SPJ7

Answer:

False

Explanation:

We are given:

extension of the spring (x) = 10 cm OR 0.1 m

Force applied to keep it in position (F) = 500 N

Solving for the spring constant:

We know that F = kx (when the spring is extended)

replacing the variables with the given values

500 = k * 0.1

k = 5000 N/m

This means that to extend the spring by 1 m, we have to apply a force of 5000 N

Answer:

jury trial

Explanation:

rights to a fair trial by jury, or the whole innocent until proven guilty ya know

Answer:

(a) Normal force=7.48 N

Explanation:

N+F~1 sinθ-mg=0

=>N=1.5*9.8-12 sin37◦

=>N=14.7-7.22=7.48 N

Answer:

The temperature and gravity both affects the density

Answer:

32

Explanation:

Up forces and Down forces must be equal if the object is balanced

For this question

down force is weight of the plank

up forces is 14 and 18

14+18=Weight of plank

Answer:

The power required to drive the pump is reduced in [tex]\frac{1}{8}[/tex].

Explanation:

From Turbomachinery, we find that power required to drive the pump ([tex]\dot W[/tex]) is directly proportional to the cube of the speed of rotation of the impeller ([tex]\dot n[/tex]). That is:

[tex]\dot W \propto \dot n^{3}[/tex]

[tex]\dot W = k\cdot \dot n ^{3}[/tex] (Eq. 1)

Where [tex]k[/tex] is the proportionality constant.

And now we eliminate the proportionality constant by constructing the following relationship:

[tex]\frac{\dot W_{B}}{\dot W_{A}} = \left(\frac{\dot n_{B}}{\dot n_{A}}\right)^{3}[/tex] (Eq. 2)

If we know that [tex]\frac{\dot n_{B}}{\dot n_{A}} = \frac{1}{2}[/tex], then:

[tex]\frac{\dot W_{B}}{\dot W_{A}} = \frac{1}{8}[/tex]

The power required to drive the pump is reduced in [tex]\frac{1}{8}[/tex].

Answer:

false

Explanation:

In a p-n junction diode, the absolute value of the electric field is the largest at the metallurgical junction is false statement.

An electric field is a physical field that surrounds electrically charged particles and acts as an attractor or repellent to all other charged particles in the vicinity. It can also refer to a system of charged particles' physical field.

In a p-n junction diode, the absolute value of the electric field is the not largest at the metallurgical junction field is maximum at the depletion region.

In a p-n junction diode, the absolute value of the electric field is the largest at the metallurgical junction is false statement.

To learn more about electric field refer to the link:

brainly.com/question/15800304

#SPJ5