A racehorse gallops at a speed of 65 km / h. how long will it take to reach the finish line in a 1,500 m race?

The concept or principle used to determine that the two rock types were deposited during the same time period is the principle of faunal succession.

This principle states that fossils of similar organisms found in rocks from different locations were deposited during the same time period, as the distribution of fossils in the rock layers is related to the relative ages of the rocks.

By finding the same fossil trilobites in both the Indiana and Colorado limestone rocks, it can be inferred that the rocks were deposited during the same time period and were likely part of the same geologic formation.

To know more about faunal succession, refer here:

https://brainly.com/question/13674871#

#SPJ11

The refractive index of the wave in medium X is 0.577.

The refractive index of a substance or medium measures how much light can bend through it. The difference between the speed of light in an object or medium and the speed of light in a vacuum (or in air) is how it is defined. Usually, the letter n is used to denote the refractive index.

The refractive index of a substance or medium is a critical property that determines how light will behave when it passes through it.

We know that the refractive index can be obtained as;

n = sin i/sinr

Thus we have that;

sin i = sin 30

sin r = sin 60

n = sin 30/sin 60

n = 0.577

Learn more about refractive index:https://brainly.com/question/23750645

#SPJ1

I would sit on the side of looking for ways to save Earth and our ability to stay there, rather than looking to the sky to find a new planet to live on.

While finding new habitable planets is an interesting scientific pursuit, it is not a practical solution to the problems we face on Earth. Instead, we should focus on preserving and restoring our planet's ecosystems, reducing our carbon footprint, and developing sustainable technologies. Furthermore, the idea that the Apollo program was just propaganda is a conspiracy theory without any evidence to support it.

To know more about moon, here

brainly.com/question/13538936

#SPJ4

We need to use the formula for work done, which is :

W = F x D

P = W / T

In this case, the force (F) is equal to the weight of the mass, which is :

F = m x g

where m is the mass (100kg) and g is the acceleration due to gravity (9.81 m/s²).

F = 100kg x 9.81 m/s² = 981 N

The power (P) of the engine is 400 W, and the time (T) is 3 seconds.

P = W / T, therefore W = P x T = 400 W x 3 s = 1200 J

Now we can use the work formula to find the distance (D) that the engine can lift the mass :

D = W / F = 1200 J / 981 N = 1.22 m

Therefore, the 400W engine can lift a 100kg mass to a height of 1.22 meters in 3 seconds.

The solar cell that applies photosynthesis chemistry to generate hydrogen is different from traditional solar cells that directly convert sunlight into electricity because it uses a chemical process to store the energy generated by sunlight, whereas traditional solar cells directly produce electricity.

In the photosynthesis-based solar cell, the energy from sunlight is used to split water into hydrogen and oxygen through a chemical reaction, and the hydrogen is stored for later use in a fuel cell to generate  the electricity. Traditional solar cells, on the other hand, generate electricity by converting sunlight directly into electrical energy through the photovoltaic effect.

To know more about photosynthesis, here

brainly.com/question/29764662

#SPJ4

--The complete Question is, How does the solar cell that applies photosynthesis chemistry to generate hydrogen differ from traditional solar cells that directly convert sunlight into electricity? --

Because the total voltage supplied by the battery is distributed among all the components in a series circuit, if a switch is closed, the potential difference across the resistor and bulb will remain unchanged.

The light cannot be turned on when the switch is open because the circuit is incomplete. The circuit lacks a closed-loop channel for the current to follow.

The potential difference between the two extremes of the arrangement in a series connection of resistors is equal to the total of the potential differences across individual resistors.

To learn more about series circuit visit:

brainly.com/question/11409042

#SPJ9

Answer:

The generator makes static electricity the same way you do when you rub your feet on the carpet and then touch a doorknob.

Explanation:

. Inside the generator is a giant rubber band that rubs across a piece of felt, stealing its electrons. The rubber band then spins around and the electrons travel up to the big metal ball on top.

About 130,346,719.13 meters per second is the speed of light in a medium having an absolute index of refraction of 2.3.

The difference between the speed of light in the medium and the speed of light in a vacuum or in air is known as the refractive index of a media.

n = c / v

We are given that the absolute refractive index of the medium is 2.3. So, we can write:

n = 2.3

Thus, the speed of light in the medium is:

v = c / n = c / 2.3

The speed of light in a vacuum or in air, denoted by the symbol c, is around 299,792,458 meters per second. Therefore, by substituting this value, we obtain:

v = 299,792,458 m/s / 2.3

Simplifying this expression gives:

v = 130,346,719.13 m/s

Therefore, About 130,346,719.13 meters per second is the speed of light in a medium having an absolute index of refraction of 2.3.

Learn more about refractive index here : brainly.com/question/12469161

#SPJ1

The amount of energy absorbed by the water is 58,576J. The answer is 4) 58,576J.

The formula to calculate the amount of energy absorbed by the water is:

Q = m x c x ΔT

Where Q is the amount of energy absorbed (in Joules), m is the mass of water (in grams), c is the specific heat capacity of water (in J/g℃), and ΔT is the change in temperature (in ℃).

Substituting the given values, we get:

Q = 200g x 4.184 J/g℃ x (100℃ - 30℃)
Q = 200g x 4.184 J/g℃ x 70℃
Q = 58,576J

Therefore, the amount of energy absorbed by the water is 58,576J. The answer is 4) 58,576J.

To learn more about heat, refer below:

https://brainly.com/question/1429452

#SPJ11

The correct answer is c. Both Technician A and B are correct.

Technician A is correct because there is often more than one circuit being protected by each fuse. Fuses are used to protect electrical circuits from excessive current, which can cause damage or fire. It is common for multiple circuits to be connected to a single fuse, as it simplifies the electrical system and reduces the number of fuses needed.

Technician B is also correct because more than one circuit often shares a single ground connector. A ground connector provides a path for excess electrical energy to flow safely to the ground, preventing damage to components and electrical shock. By sharing a ground connector, multiple circuits can utilize a common grounding point, further simplifying the electrical system and reducing the need for additional connectors.

Overall Both technicians are correct, as multiple circuits can be protected by a single fuse, and multiple circuits can share a single ground connector.

To Know more about fuse in electrical circuits click here:

https://brainly.com/question/31229645

#SPJ11

Answer:

Trait

Explanation:

You already have the right answer chosen.

Answer:

trait

Explanation:

Looks like you already had the right answer

A girl carrying a 20 Kg box climbs up 10 steps, each 20 cm high, in 16 seconds. Her own mass is 50 Kg. Her weight is 490.5N. The weight of the box is 196.2 N. When the girl reaches the top, she has traveled a vertical height of 2 meters.

a. The girl's weight is given by the product of her mass and the acceleration due to gravity. Thus, her weight is:

Weight = mass x acceleration due to gravity

Weight = [tex]50 \;kg \times 9.81 \;m/s^2[/tex]

Weight = 490.5 N

b. The weight of the box is also given by the product of its mass and the acceleration due to gravity. Thus, its weight is:

Weight = mass x acceleration due to gravity

Weight = [tex]20 \;kg \times 9.81 \;m/s^2[/tex]

Weight = 196.2 N

c. The vertical height of each step is given as 20 cm or 0.2 m. Therefore, the total vertical height traveled by the girl is:

Total height = number of steps x height of each step

Total height = 10 steps x 0.2 m/step

Total height = 2 m

Hence, when the girl reaches the top, she has traveled a vertical height of 2 meters.

In summary, we calculated the weight of the girl and the box, and determined the vertical height traveled by the girl when she climbed a flight of 10 steps, each step 20 cm high, in 16 seconds.

To know more about weight refer here:

https://brainly.com/question/30632837#

#SPJ11

The current in the 5.00 ohm resistor is 0.052 A.

The induced emf in each metal rod is given by e = Blv, where B is the magnetic field strength, l is the length of the metal rod moving in the magnetic field, and v is the velocity of the rod. For the 10.0 ohm rod, the induced emf is e = (0.0100 T)(0.100 m)(4.00 m/s) = 0.00400 V. The current through the 10.0 ohm rod is then I1 = e/R1 = 0.000400 A.

For the 15.0 ohm rod, the induced emf is e = (0.0100 T)(0.100 m)(2.00 m/s) = 0.00200 V. The current through the 15.0 ohm rod is then I2 = e/R2 = 0.000133 A. Since the two rods are connected in series, the current through the 5.00 ohm resistor is the same as the current through the two rods: I = I1 + I2 = 0.000533 A.

Using Ohm's law, the voltage drop across the 5.00 ohm resistor is V = IR = (0.000533 A)(5.00 ohm) = 0.00266 V. Therefore, the current in the 5.00 ohm resistor is I = V/R = (0.00266 V)/(5.00 ohm) = 0.052 A.

To know more about the Parallel, here

https://brainly.com/question/31272540

#SPJ4

The new pressure of the oxygen is 128 kPa. The correct answer is (a).

In the given problem, we are given the initial pressure, volume, and temperature of oxygen in a bottle and asked to find the new pressure of oxygen after the bottle breaks open and leaks into the outer container. We can use the combined gas law equation to find the new pressure of oxygen. The volume and temperature of the oxygen changes from 0.3 L and 290 K to 1.5 L and 370 K, respectively, while the amount and state of the oxygen remain constant. Using the combined gas law equation P₁V₁ / T₁ = P₂V₂ / T₂, we can find the new pressure of the oxygen:

P₂ = (P₁ x V₁ x T2) / (V₁ x T₁)

P₂ = (500 kPa x 0.30 L x 370 K) / (1.5 L x 290 K)

P₂ = 128 kPa

To know more about temperature, here

https://brainly.com/question/11464844

#SPJ4

The force acting on the 12 kg mass would be 11 N.

To solve this problem, we need to use the work-energy principle, which states that the work done by a force on an object is equal to the change in the object's kinetic energy.

First, we need to calculate the initial and final kinetic energy of the 12 kg mass.

The initial kinetic energy is given by:

K₁ = (1/2) * m * v₁²

= (1/2) * 12 kg * (11 m/s)²

= 726 J

The final kinetic energy is given by:

K₂ = (1/2) * m * v₂²

= (1/2) * 12 kg * (26 m/s)²

= 936 J

The change in kinetic energy is:

ΔK = K₂ - K₁

= 936 J - 726 J

= 210 J

Next, we need to calculate the work done by the unknown force. We can do this by using the formula:

W = F * d * cosθ

where W is the work done, F is the force, d is the displacement, and θ is the angle between the force and displacement vectors.

In this case, the displacement is 22 meters, and the angle θ is 30 degrees. So we have:

W = F * d * cosθ

= F * 22 m * cos(30°)

= 19.1 F

Finally, we can use the work-energy principle to solve for the unknown force:

W = ΔK

19.1 F = 210 J

F = 11 N

Therefore, the force acting on the 12 kg mass is 11 N.

To know more about force

https://brainly.com/question/20888400

#SPJ1

The power required to run the compressor is 18,506 W or approximately 18.5 kW, calculated using the rate of heat transfer through the insulation and the efficiency of the refrigerator.

To determine the power required to run the compressor, we need to consider the heat transfer that occurs through the insulation and the temperature difference between the interior of the refrigerator and the room.

First, we can calculate the rate of heat transfer through the insulation using the formula:

Q = kA (ΔT / d)

where Q is the rate of heat transfer, k is the thermal conductivity of the insulation material, A is the surface area of the refrigerator, ΔT is the temperature difference between the interior and exterior of the refrigerator, and d is the thickness of the insulation. Plugging in the given values, we get:

Q = (0.0119 J/m·s·°C) × (2.6 m²) × ((46.5°C - 8.5°C) / 0.045 m)

Q = 581.6 W

This represents the rate at which heat is flowing into the refrigerator from the warmer surroundings. To maintain the interior temperature at 8.5°C, the refrigerator must remove this heat at the same rate.

The ratio of the heat extracted from the interior to the work done by the motor is 3.8% of the theoretical maximum. The theoretical maximum is given by the Carnot efficiency, which is:

η = 1 - (T_cool / T_hot)

where T_cool is the temperature inside the refrigerator and T_hot is the temperature outside. Plugging in the given values, we get:

η = 1 - (8.5°C / 46.5°C) = 0.8172

So the actual efficiency of the refrigerator is:

ε = 0.038 × 0.8172 = 0.0314

This means that for every 1 W of power consumed by the motor, the refrigerator extracts 0.0314 W of heat from the interior. Therefore, the power required to run the compressor is:

P = Q / ε = 581.6 W / 0.0314 = 18,506 W

So the power required to run the compressor is 18,506 W or approximately 18.5 kW.

To learn more about compressors

https://brainly.com/question/31672001

#SPJ4

It is safe to assume that each cart would experience a distinct force during each collision caused by the carts, and the force distribution would change depending on the aforementioned criteria.

During each individual collision, it is unlikely that the two carts received the same force during the collision. This is because the force of the collision depends on various factors such as the mass and velocity of the carts, the angle of collision, and the materials of the carts.

For instance, if one cart was heavier and moving faster than the other, it would exert more force during the collision. Additionally, the angle of collision can also affect the force received by each cart.

If the collision was head-on, the force would be distributed evenly between the carts. However, if the collision was at an angle, one cart would receive more force than the other.

The materials of the carts can also affect the force of the collision, as carts made of more rigid materials would receive more force than carts made of softer materials.

Overall, it is safe to say that each individual collision created by the carts would result in different forces being exerted on each cart, and the force distribution would vary depending on the aforementioned factors.

To learn more about :collision

https://brainly.com/question/7221794

#SPJ11

The elastic limit is the maximum stress that a material can withstand without undergoing permanent deformation.

When a structure is built on a fault line, the elastic limit plays a crucial role in determining its ability to withstand seismic forces.

If the stress caused by an earthquake exceeds the elastic limit of the structure's materials, the structure may experience permanent deformation, which can lead to compromised structural integrity and potential failure.

In contrast, if the stress remains within the elastic limit, the structure can return to its original shape once the stress is removed, maintaining its structural integrity.

In conclusion, the elastic limit affects a structure built on a fault line by determining its resilience to seismic forces.

Ensuring that the stress remains within the elastic limit can help maintain the structure's integrity and minimize damage during earthquakes.

To learn more about elastic, refer below:

https://brainly.com/question/13479805

#SPJ11

The magnitude of the electric field between two parallel plates is given by:

E = V/d

where V is the potential difference between the plates and d is the distance between them.

In this case, V = 12 V and d = 0.59 cm = 0.0059 m. Substituting these values, we get:

E = 12 V / 0.0059 m

E = 2033.9 V/m

Therefore, the magnitude of the electric field is 2033.9 V/m.

The change, on its own, that will cause the voltmeter to show a positive reading is Reduce the intensity of light incident on the light-dependent resistor (LDR). Option C

When the intensity of light incident is reduced on the light-dependent resistor  LDR, it will increase its resistance.

This would cause a massive drop in voltage across the LDR.

This will then cause the potential at Y to be lower than that at X. This change alone could result in a positive reading on the voltmeter.

Find more exercises on light-dependent resistor  LDR;

https://brainly.com/question/27844122

#SPJ1

Answer:

class b

Explanation:

flamabal liquids , gas alcohol or oil

Bumper cars are a popular ride at fairs and amusement parks, designed for riders to bump into each other while driving around. When two bumper cars move towards each other, there are two factors that affect the momentum of each car.

The first factor is the mass of the car. The heavier the car, the more momentum it has. So, a heavier bumper car will be harder to stop and will have more force when it hits another car. The second factor is the speed of the car. The faster a car is moving, the more momentum it has.

Therefore, if two cars are moving at the same speed, they will have equal momentum. However, if one car is moving faster than the other, it will have more momentum and cause a greater impact when it collides.

When two bumper cars crash into each other, both cars come to a stop. This is due to the law of conservation of momentum. This law states that in a closed system, the total momentum before a collision is equal to the total momentum after the collision.

In this case, the two bumper cars collide and their momentum is transferred to each other, causing both cars to come to a stop.

When the cars collide, the force of the impact causes the cars to stop. The cars' kinetic energy is transferred to other forms of energy, such as heat and sound.

Additionally, the cars' bumpers are designed to absorb some of the impact, which also helps to slow the cars down and prevent injury to the riders.

In conclusion, the momentum of a bumper car is affected by its mass and speed. When two cars collide, they come to a stop due to the law of conservation of momentum. The force of the impact and the design of the bumpers also play a role in the cars' deceleration.

To know more about momentum refer here

https://brainly.com/question/30677308#

#SPJ11

The Lagrangian is then given by L = T - V.

(a) Writing down the Lagrangian (L): The Lagrangian is the difference between the kinetic and potential energies of the system.

In this case, the particle is confined to move on the surface of a circular cone, so we need to express the kinetic and potential energies in terms of the spherical polar coordinates (r, θ).

The kinetic energy can be expressed as T = (1/2) m (dr/dt)^2 + (1/2) m r^2 (dθ/dt)^2, where m is the mass of the particle.

The potential energy can be expressed as V = m g r cosθ, where g is the acceleration due to gravity.

The Lagrangian is then given by L = T - V.

(b) Finding the equations of motion: The equations of motion can be obtained by applying the Euler-Lagrange equations to the Lagrangian L.

This involves taking partial derivatives of L with respect to the generalized coordinates (r, θ) and their derivatives (dr/dt, dθ/dt), and then solving the resulting equations.

One of the resulting equations of motion will be related to the angular momentum tz. It can be interpreted as the conservation of angular momentum around the z-axis.

The r equation of motion can be used to eliminate θ from the r equation, in favor of a constant fz.

The r equation should make physical sense even when θ = 0.

To find the value ro of r at which the particle can remain in a horizontal circular path, you would need to analyze the equilibrium conditions of the system and solve for r.

(c) Analyzing stability and frequency of oscillation: By assuming r(t) = ro + E(t), where E(t) is a small radial perturbation from the equilibrium position ro, you can substitute this expression into the r equation of motion to determine whether the circular path is stable.

Stability can be determined by examining the behavior of the perturbation E(t) over time.

The frequency of oscillation about ro can be obtained by analyzing the form of the solution E(t) and determining the frequency at which it oscillates.

To learn more about frequency, refer below:

https://brainly.com/question/5102661

#SPJ11

The wavelength of a microwave frequency is the inverse of its frequency; that is, the wavelength is equal to the speed of light (in a vacuum) divided by the frequency. In this case, the frequency is 10 GHz, meaning the wavelength is approximately 3 cm.

Wavelength is the distance from one peak of a wave to the next, and is inversely proportional to frequency; that is, as frequency increases, wavelength decreases. Microwaves, which have frequencies between 300 MHz and 30 GHz, have wavelengths of 1 m to 1 cm, respectively. This makes them ideal for applications that require short-range communication, such as microwave ovens, wireless communication, and radar.

Microwaves are also used in remote sensing, as they can penetrate some materials, such as clouds, allowing us to measure the properties of objects behind them.

Know more about wavelength here

https://brainly.com/question/12924624#

#SPJ11

According to the question, the gravitational force is 98 N. The frictional force is 39.2 N. The acceleration is 1.5 m/s².

Gravitational force is a natural phenomenon that exists between any two objects with mass. It is the force of attraction between two masses that is directly proportional to the product of their masses and inversely proportional to the square of the distance between them. This force is usually expressed in Newton's law of universal gravitation, where the force of gravity between two objects can be calculated by multiplying their masses and dividing by the square of the distance between them.

The gravitational force is the force of gravity that acts on the box and is equal to the mass of the box times the acceleration due to gravity.

Gravitational force = 10 kg × 9.8 m/s² = 98 N

The normal force is equal to the mass of the box times the acceleration due to gravity.

Frictional force = coefficient of friction × normal force

          = 0.4 × (10 kg × 9.8 m/s²)

          = 39.2 N

The acceleration of the box is calculated using Newton's second law of motion, which states that the net force on an object is equal to the mass of the object times its acceleration.

Net force = mass × acceleration

15 N = 10 kg × a

a = 1.5 m/s²

To learn more about gravitational force

https://brainly.com/question/72250

#SPJ4

Because capacitors have the ability to filter signals, they are frequently employed in a variety of audio devices like loudspeakers, microphones, woofers, tweeters, and other similar devices.

Energy storage, power conditioning, electronic noise filtering, distant sensing, and signal coupling and decoupling are some of the most typical uses for capacitors. Capacitors are employed in a variety of industries because they serve an essential and adaptable function in a wide range of applications.

Today's smartphone antenna systems depend heavily on capacitors. They are mostly employed for impedance matching, frequency tuning, and filtering.

To know more about capacitors visit:-

brainly.com/question/17176550

#SPJ1

The plane's speed with respect to the ground is the vector sum of its velocity and the wind's velocity, which is 75 km/hr to the east.

To determine the plane's speed with respect to the ground, we can use vector addition.

We can break down the plane's velocity vector into its components: a northward component of 150 km/hr and an eastward component of 0 km/hr (since the plane is not moving eastward).

Similarly, we can break down the wind's velocity vector into a northward component of 0 km/hr and an eastward component of 75 km/hr.

To find the resultant velocity vector, we add the corresponding components of the plane and the wind.

The northward components cancel each other out, and we are left with an eastward component of 75 km/hr. Therefore, the plane's speed with respect to the ground is 75 km/hr.

In summary, the plane's speed with respect to the ground is the vector sum of its velocity and the wind's velocity, which is 75 km/hr to the east.

To know more about vector addition, refer here:

https://brainly.com/question/28501946#

#SPJ11

The angular acceleration required to stop the rotation of the Earth over a period of 30 minutes would be equal to the final angular velocity divided by the time interval.

The Earth's rotation is an example of rotational motion, which is described by angular velocity and angular acceleration. Angular velocity is the rate of change of angular displacement with respect to time, and angular acceleration is the rate of change of angular velocity with respect to time.  

The final angular velocity would be zero, since the Earth would have stopped rotating, and the initial angular velocity can be calculated by dividing the circumference of the Earth (40,075 km) by the time period of 24 hours or 1,440 minutes, which gives a value of approximately 0.28 degrees per minute.

Therefore, the initial angular velocity would be (0.28 degrees/minute)(2pi radians/360 degrees) = 0.00489 radians/minute. Dividing this value by 30 minutes gives an angular acceleration of approximately 0.000163 radians/(minute²).

To know more about the Acceleration, here

https://brainly.com/question/12886507

#SPJ4

The statement "The idea of 'visible' and 'invisible' work is related to other hierarchical dichotomies in our culture about work, including 'valuable' and 'unvalued' work" is true.

Visible work refers to tasks that are easily seen and recognized, such as high-profile jobs in fields like business, law, or medicine. Invisible work, on the other hand, refers to tasks that are often unseen and undervalued, such as caregiving, domestic work, or service industry jobs.

This dichotomy is further perpetuated by the gendered division of labor, where women are often expected to perform invisible work while men are expected to perform visible work. This results in a devaluation of traditionally feminine jobs and reinforces gender inequalities in the workforce.

Furthermore, the value placed on certain types of work is often linked to the economic rewards and social status that accompany them. This creates a hierarchy of jobs where those in visible, high-status positions are paid more and afforded more respect than those in invisible, low-status positions.

In summary, the idea of visible and invisible work is related to other hierarchical dichotomies in our culture about work, including valuable and unvalued work. This perpetuates gender inequalities and creates a hierarchy of jobs based on economic rewards and social status.

To know more about dichotomies refer here:

https://brainly.com/question/31110702#

#SPJ11

Complete Question:

The idea of "visible" and "invisible" work is related to other hierarchical dichotomies in our culture about work, including "valuable" and "unvalued" work. True or False.

The total distance you traveled is 25.0 km, and the total displacement you traveled is 15.0 km to the right and average speed is  12.5 km/h and velocity is 7.5 km/h to the right.

a. To find the total distance you traveled, add the distance you traveled to the right (20.0 km) and the distance you traveled back (5.0 km). Total distance = 20.0 km + 5.0 km = 25.0 km.

b. To find the total displacement, subtract the distance you traveled back (5.0 km) from the distance you traveled to the right (20.0 km). Total displacement = 20.0 km - 5.0 km = 15.0 km to the right.

c. To find your average speed, divide the total distance you traveled by the time it took to complete the journey. Average speed = Total distance / Time = 25.0 km / 2 hours = 12.5 km/h.

d. To find your average velocity, divide the total displacement by the time it took to complete the journey. Average velocity = Total displacement / Time = 15.0 km / 2 hours = 7.5 km/h to the right.

Know more about average velocity click here:

https://brainly.com/question/11265533

#SPJ11