Using a hammer and nail instead of a screwdriver and screw would change the type of force applied (linear versus rotational) and the distance covered (shorter linear distance versus longer turning distance). These differences can affect the efficiency, holding power, and ease of use when connecting materials.
When using a screwdriver and screw, the applied force of 20 newtons and turning distance of 0.5 meters involve rotational motion to insert the screw into the wood. The screwdriver acts as a lever, and the screw's threads translate the rotational force into linear motion, increasing the grip strength and holding power.
In contrast, when using a hammer and nail, the force applied would be different because the action is linear instead of rotational. The hammer delivers a series of high-impact, short-duration forces to drive the nail into the wood. The amount of force required would depend on factors like the size of the nail, the hardness of the wood, and the user's strength.
Additionally, the distance covered during hammering would be different. Unlike the screwdriver's 0.5-meter turning distance, the hammer's motion covers a shorter linear distance as it strikes the nail head repeatedly. The total distance depends on the number of hammer strikes and the length of the nail.
To know more about force, refer to the link below:
https://brainly.com/question/20120470#
#SPJ11
Complete Question:
A person uses a screwdriver to turn a screw and insert it into a piece of wood. The person applies a force of 20 newtons to the screwdriver and turns the handle of the screwdriver a total distance of 0.5 meter. How would these numbers be different if the person inserted a nail with a hammer instead of the screw with the screwdriver?
A. The force applied would be greater, but the distance would be shorter.
B. The force applied would be less, but the distance would be greater.
C. The force applied would be the same, but the distance would be shorter.
D. The force applied would be the same, but the distance would be greater.
A computer can download 3 megabytes in 5 seconds. If the computer downloads data at a constant rate, what is the linear equation that represents the number of megabytes downloaded per second?
A. y = −1.67x
B. y = −0.6x
C. y = 0.6x
D. y = 1.67x
The slope of the equation is 0.6, which means that for every second, the computer downloads 0.6 megabytes of data, option C is correct.
The linear equation that represents the number of megabytes downloaded per second can be determined by dividing the total amount of data downloaded (3 MB) by the time taken to download it (5 seconds). This gives us the rate of download in megabytes per second (MB/s). Therefore, the equation is:
y = 0.6x
where y represents the number of megabytes downloaded per second and x represents the time taken to download the data. The negative slope values in the other options do not make sense, as the number of megabytes downloaded per second should be a positive value, option C is correct.
To learn more about equation follow the link:
https://brainly.com/question/11897796
#SPJ1
The town of Madison has a population of
25
,
000
25,00025, comma, 000. The population is increasing by a factor of
1.12
1.121, point, 12 each year.
Write a function that gives the population
P
(
t
)
P(t)P, left parenthesis, t, right parenthesis in Madison
t
tt years from now.
Do not use commas in your answer.
The function for the population of Madison t years from now is:[tex]p(t) = 25000 (1.12)^{t}[/tex]
To write a function that gives the population P(t) in Madison t years from now, considering the town has an initial population of 25,000 and an annual increase factor of 1.12, you can use the formula:
[tex]p(t) = P_{0} (1 + r)^{t}[/tex]
Where:
- P(t) is the population at time t
- P_0 is the initial population (25,000)
- r is the annual increase factor (1.12 - 1 = 0.12)
- t is the number of years
So, the function for the population of Madison t years from now is:
[tex]p(t) = 25000 (1.12)^{t}[/tex]
To know more "Function" refer here:
https://brainly.com/question/10500042#
#SPJ11
Aquarium A contains 6 gallons of water. Dan will begin filling Aquarium A at a rate of 2 gallons per minute.
Aquarium B contains 54 gallons of water. Roger will begin filling Aquarium B at a rate of 1 gallon per minute.
After how many minutes will both aquariums contain the same amount of water?
To find the number of minutes it will take for both Aquarium A and Aquarium B to contain the same amount of water, we can set up an equation using the given information.
Aquarium A starts with 6 gallons and is filled at 2 gallons per minute. The equation for Aquarium A will be:
A = 6 + 2t
Aquarium B starts with 54 gallons and is filled at 1 gallon per minute. The equation for Aquarium B will be:
B = 54 + 1t
We want to find the time 't' when the amount of water in both aquariums is equal, so we can set the equations equal to each other:
6 + 2t = 54 + 1t
Now, solve for 't':
2t - 1t = 54 - 6
t = 48
After 48 minutes, both Aquarium A and Aquarium B will contain the same amount of water.
Learn more about Aquarium at https://brainly.com/question/29416802
#SPJ11
coordinate grid by equation y=4 what line would represent a row parallel to it ?
A row parallel to the line y = 4 on a coordinate grid would be represented by a line with an equation of the form y = c.
How to find a row parallel to y=4 on a coordinate grid?A coordinate grid is a two-dimensional plane consisting of a horizontal x-axis and a vertical y-axis. The point where the x and y-axes intersect is called the origin, and it has coordinates (0, 0).
An equation in the form y = c, where c is a constant, represents a horizontal line parallel to the x-axis. In this case, the equation y = 4 represents a horizontal line that intersects the y-axis at 4, as all points on the line have a y-coordinate of 4.
To find a row parallel to this line, we need to look for another line that also has a constant y-coordinate of 4. One way to represent this line is by the equation y = 4 again, since all points on this line have a y-coordinate of 4.
Alternatively, we can look for an equation in the form y = mx + b, where m is the slope of the line (which is zero for a horizontal line), and b is the y-intercept (which is 4 in this case). Thus, the equation for the row parallel to y = 4 would also be y = 4, since its slope is zero and it intersects the y-axis at y = 4, just like the line y = 4.
Learn more about coordinate grid
brainly.com/question/17597121
#SPJ11
In a hypothesis test for a mean in one population, where you have H subscript 0 colon space mu space equals space 40 comma space H subscript A colon space mu space not equal to space 40 and the population standard deviation is sigma space equals space 12, what are the critical value(s) of the sample mean x with bar on top if your sample size is 36 and the significance level alpha = 0. 05?
Group of answer choices
Using the t-distribution table with a sample size of 36 and a significance level of 0.05, we find the critical t-value to be ±2.03 (with 34 degrees of freedom, which is n-1).
What are the critical values of the sample mean for a hypothesis test with a sample size of 36, population standard deviation of 12, significance level of 0.05, and null hypothesis of μ = 40?
To explain, we use the t-distribution to find the critical values because the population standard deviation is known. Since the alternative hypothesis is two-tailed (H_A: μ ≠ 40), we need to find two critical values.
With a sample size of 36, the degrees of freedom are 34 (n-1), so we use a t-distribution table with 34 degrees of freedom and a significance level of 0.05. From the table, we find the critical t-value to be ±2.03.
Therefore, if the calculated t-value falls outside of this range, we can reject the null hypothesis H0: μ = 40 in favor of the alternative hypothesis H_A: μ ≠ 40.
Learn more about Hypothesis
brainly.com/question/31804924
#SPJ11
If a couch measures 10ft across in real life, what would it's measurement be in the scale drawing (in)
Explain
the measurement of the couch in the scale drawing would be 15 inches.
what is scale drawing?We can precisely portray locations, areas, structures, and details in scale drawings at a scale that is either smaller or more feasible than the original.
When a drawing is said to be "to scale," it signifies that each piece is proportionate to the real or hypothetical entity; it may be smaller or larger by a specific amount.
When something is described as being "drawn to scale," we assume that it has been printed or drawn to a conventional scale that is accepted as the norm in the construction sector.
When our awareness of scale improves, we are better able to quickly recognize the spaces, zones, and proposed or existent spatial relationships when looking at a drawing at a given scale.
One metre is equivalent to one metre in the actual world. When an object is depicted at a 1:10 scale, it is 10 times smaller than it would be in real life.
You might also remark that 10 units in real life are equivalent to 1 unit in the illustration.
To determine the measurement of the couch in the scale drawing, we can use the scale factor provided:
1/4 inch = 2 feet
This means that every 1/4 inch in the drawing represents 2 feet in real life.
To find the measurement of the couch in the drawing, we need to convert its actual size to the corresponding size in the drawing using the scale factor.
First, we can convert the actual size of the couch to feet:
10 ft = 10 ft x 12 inches/ft = 120 inches
Next, we can use the scale factor to convert the actual size to the corresponding size in the drawing:
1/4 inch = 2 feet
1 inch = 8 feet (multiplying both sides by 4)
So, 120 inches in real life is equal to:
120 inches / 8 feet per inch = 15 inches in the drawing
Therefore, the measurement of the couch in the scale drawing would be 15 inches.
To know more about scale drawing visit :-
https://brainly.com/question/17388747
#SPJ1
Adam is purchasing a new television that costs $2,187. 96 after tax. He borrowed the money from his parents and must pay back the full amount plus simple interest at the rate of 3. 5%. What is the interest he will pay if he takes 2 years to pay his parents back? (Include Decimal with the cents; No Commas)
and
Adam is purchasing a new television that costs $2,187. 96 after tax. He borrowed the money from his parents and must pay back the full amount plus simple interest at the rate of 3. 5%. What is the total amount he will pay if he takes 2 years to pay his parents back? (Include Decimal with the cents; No Commas)
please
he interest he will pay if he takes 2 years to pay his parents back is $153.16. The total amount he will pay if he takes 2 years to pay his parents back is $2,341.12.
To calculate the interest Adam will pay, we need to use the simple interest formula:
Interest = Principal x Rate x Time
The principal is the amount borrowed, which is $2,187.96. The rate is 3.5% per year, or 0.035 in decimal form. The time is 2 years.
Interest = $2,187.96 x 0.035 x 2 = $153.16
Therefore, Adam will pay $153.16 in interest if he takes 2 years to pay his parents back.
To calculate the total amount he will pay, we need to add the interest to the principal:
Total amount = Principal + Interest
Total amount = $2,187.96 + $153.16 = $2,341.12
Therefore, Adam will pay a total of $2,341.12 if he takes 2 years to pay his parents back.
Learn more about simple interest here: https://brainly.com/question/25793394
#SPJ11
Let f(x)= 3x and g(x)= 3(x+1)^2. Find (fg)(x) and (f/g)(x).
State the domain of each.
Evaluate the following: (fg)(5) and (f/g)(5)
The value of the domains is given as:
(fg)(5) equals 1620 (f/g)(5) is equivalent to 5/36.How to solveIn order to find the results of (fg)(x) and (f/g)(x), we must begin by multiplying and dividing the two functions, respectively:
(fg)(x) = f(x) * g(x) = [tex]3x * 3(x + 1)^2 = 9x(x + 1)^2[/tex]; its domain containing all real numbers.
Similarly, (f/g)(x) = f(x) / g(x) = in a domain that does not [tex]3x / 3(x + 1)^2 = x / (x + 1)^2[/tex]include x = -1 (if g(x) ≠ 0).
Let us now evaluate (fg)(5) and (f/g)(5):
(fg)(5) =[tex]9(5)(5 + 1)^2 = 9(5)*(6)^2[/tex] = 9(5(36)) = 1620 while
(f/g)(5) = [tex]5/(5 + 1)^2 = 5/(6)^2[/tex] = 5/36.
Consequently, (fg)(5) equals 1620 and (f/g)(5) is equivalent to 5/36.
Read more about domain here:
https://brainly.com/question/26098895
#SPJ1
Data was taken on carpooling in Tallahassee,
Florida. For each person's daily commute, the number
of people in the car was recorded. The results are
summarized in the bar graph at left. What is the
median number of people in the car?
100
80
60-
Percent of population
20
0+
2
3 4 or more
Number of people in car
Answer:34
Step-by-step explanation:
Buy-Rite Pharmacy has purchased a small auto for delivering prescriptions. The auto was purchased for $26,000 and will have a 6-year useful life and a $5,500 salvage value. Delivering prescriptions (which the pharmacy has never done before) should increase gross revenues by at least $33,500 per year. The cost of these prescriptions to the pharmacy will be about $28,000 per year. The pharmacy depreciates all assets using the straight-line method. The payback period for the auto is closest to (Ignore income taxes. ): (Round your answer to 1 decimal place. )
The payback period for the auto is approximately 8 years.
Buy-Rite Pharmacy has purchased an auto for delivering prescriptions. The auto was purchased for $26,000, and it has a useful life of 6 years with a $5,500 salvage value. By delivering prescriptions, the pharmacy aims to increase gross revenues by at least $33,500 per year. The pharmacy will incur a cost of $28,000 per year for these prescriptions.
Using the straight-line method, the annual depreciation of the auto is ($26,000 - $5,500) / 6 = $3,917. This means that the total cost of the auto over 6 years will be $26,000 - $5,500 + ($3,917 x 6) = $43,502.
To calculate the payback period, we need to determine how long it will take for the increased gross revenues to cover the cost of the auto.
The net increase in revenues will be $33,500 - $28,000 = $5,500 per year. Therefore, the payback period is $43,502 / $5,500 = 7.9 years, which is rounded to 8 years.
To know more about payback period, refer to the link below:
https://brainly.com/question/13978071#
#SPJ11
Jamie mixes 2 parts of red paint with 3 parts of blue paint to make purple paint.
He uses 12 cans of blue paint.
How many cans of red paint does he use?
Consider the following planes.
-4x † V + 7 = 4
24X - бУ + 42 = 16
Find the angle between the two planes. (Round your answer to two decimal places.)
To find the angle between two planes, we need to find the cosine of the angle between their normal vectors. The normal vector of the first plane is (4, 0, -1) and the normal vector of the second plane is (24, -1, 0).
Using the dot product formula, we have:
cos(theta) = (4, 0, -1) · (24, -1, 0) / ||(4, 0, -1)|| ||(24, -1, 0)||
= (96 + 0 + 0) / (sqrt(16 + 1) * sqrt(576 + 1))
= 96 / sqrt(33217)
Using a calculator, we get:
cos(theta) ≈ 0.00575
Therefore, the angle between the two planes is:
theta ≈ acos(0.00575)
theta ≈ 89.59 degrees
Rounded to two decimal places, the angle between the two planes is approximately 89.59 degrees.
To find the angle between the two given planes, we first need to rewrite the equations in their standard form and find the normal vectors for each plane.
Plane 1: -4x + y + 7 = 4
Standard form: -4x + y + 0z = -3
Normal vector N1: <-4, 1, 0>
Plane 2: 24x - 6y + 42 = 16
Standard form: 24x - 6y + 0z = -26
Normal vector N2: <24, -6, 0>
Now, we can find the angle θ between the two planes by using the formula:
cos(θ) = (N1 • N2) / (||N1|| ||N2||)
First, calculate the dot product (N1 • N2):
N1 • N2 = (-4 * 24) + (1 * -6) + (0 * 0) = -102
Next, calculate the magnitudes of the normal vectors:
||N1|| = sqrt((-4)^2 + 1^2 + 0^2) = sqrt(17)
||N2|| = sqrt(24^2 + (-6)^2 + 0^2) = sqrt(576+36) = sqrt(612)
Now, we can find cos(θ):
cos(θ) = (-102) / (sqrt(17) * sqrt(612))
Finally, calculate the angle θ (in degrees) by taking the inverse cosine:
θ = arccos((-102) / (sqrt(17) * sqrt(612))) = 44.41° (rounded to two decimal places)
So, the angle between the two planes is 44.41°.
To learn more about vectors visit;
brainly.com/question/29740341
#SPJ11
What is the volume of the following rectangular prism?
2 units and 7 1/3 units
The volume of a rectangular prism is calculated by multiplying the length, width, and height. In this case, we are given the length and width, but not the height. So, we cannot calculate the exact volume without knowing the height.
To find the volume of a rectangular prism, we need to multiply its length, width, and height.
Given:
Length = 2 units
Width = 7 1/3 units
To calculate the volume, we first need to convert the mixed fraction to an improper fraction.
7 1/3 = (7 * 3 + 1) / 3 = 22/3 units.
Now, we can calculate the volume:
Volume = Length * Width * Height
= 2 units * (22/3 units) * Height.
Since the height is not provided, we cannot calculate the exact volume without that information. However, if you provide the height of the rectangular prism, I can help you find the volume by substituting the value into the formula.
To know more about volume of a rectangular prism, refer here:
https://brainly.com/question/29753475
#SPJ11
What is the diameter of a sphere with a volume of
7483
m
3
,
7483 m
3
, to the nearest tenth of a meter?
The diameter of the sphere is approximately 20 meters to the nearest tenth of a meter.
The volume of a sphere is given by the formula V = (4/3)πr^3, where r is the radius of the sphere. Since we are given the volume of the sphere, we can solve for the radius as follows:
V = (4/3)π[tex]r^{3}[/tex]
[tex]r^{3}[/tex] = (3V) / (4π)
r = [tex](3V/4\pi )^{1/3}[/tex]
Substituting the given value of the volume, we get:
r = [tex](3*7483/4\pi )^{1/3}[/tex] ≈ 10.0
Therefore, the radius of the sphere is approximately 10 meters. The diameter of the sphere is twice the radius, so the diameter is approximately:
2 x 10 ≈ 20 meters
To learn more about diameter here:
https://brainly.com/question/27933834
#SPJ4
The radius of a circle is 15 ft. Find its area in terms of pi
Answer:
A= 225π ft²
Step-by-step explanation:
A = π r²
A= π 15²
A= 225π ft²
Answer:
706.86
Step-by-step explanation:
1. A=πr^2 : The formula to find the area of a circle.
2. A = π15^2 : Substitute the given radius value into the equation.
3. Insert equation into calculator
706.86 (Rounded to the nearest hundredth)
What is the mean absolute deviation of 10 10 9 8 10 5 6 4 8 4
The mean absolute deviation of the given data set is approximately 2.16.
To find the mean absolute deviation (MAD), we first need to calculate the mean of the data set:
Mean = (10 + 10 + 9 + 8 + 10 + 5 + 6 + 4 + 8 + 4) / 10 = 7.4
Next, we calculate the absolute deviation of each data point from the mean:
|10 - 7.4| = 2.6
|10 - 7.4| = 2.6
|9 - 7.4| = 1.6
|8 - 7.4| = 0.6
|10 - 7.4| = 2.6
|5 - 7.4| = 2.4
|6 - 7.4| = 1.4
|4 - 7.4| = 3.4
|8 - 7.4| = 0.6
|4 - 7.4| = 3.4
Then, we find the average of these absolute deviations:
MAD = (2.6 + 2.6 + 1.6 + 0.6 + 2.6 + 2.4 + 1.4 + 3.4 + 0.6 + 3.4) / 10 ≈ 2.16
Therefore, the mean absolute deviation of the given data set is approximately 2.16.
To know more about mean absolute deviation, refer to the link below:
https://brainly.com/question/10528201#
#SPJ11
Find the volume of the solid enclosed by the paraboloids z = 4 (x² + y²) and z = 50 – 4 (x2 + y²).
The volume of the solid enclosed by the paraboloids z = 4 (x² + y²) and z = 50 – 4 (x² + y²) is approximately 164.93 cubic units.
To find the volume of the solid enclosed by the two paraboloids, we need to first find the intersection of the two surfaces. Setting the equations of the paraboloids equal to each other, we get:
4(x² + y²) = 50 - 4(x² + y²)
Simplifying this equation, we get:
8x² + 8y² = 50
Dividing by 8, we get:
x² + y² = 6.25
This equation represents a circle of radius 2.5 centered at the origin in the xy-plane.
To find the volume of the solid, we can use a double integral in cylindrical coordinates:
V = ∫∫R (50 - 4r²) - 4r² r dr dθ
where R is the region enclosed by the circle x² + y² = 6.25.
Evaluating the integral, we get:
V = ∫0^2π ∫0^2.5 (50 - 8r²) r dr dθ
= 2π [25r² - (4/3)r^4]0^2.5
= 2π [156.25/3]
≈ 164.93 cubic units
Therefore, the volume of the solid enclosed by the paraboloids z = 4 (x² + y²) and z = 50 – 4 (x² + y²) is approximately 164.93 cubic units.
For more such questions on volume visit:
https://brainly.com/question/463363
#SPJ11
A line shape like a trapezoid has an area of 337. 5ft^2 if the length of the bases are 25 fr and 20 ft then the perpendicular distance between bases would be
The perpendicular distance between the bases of a trapezoid with an area of 337.5 ft² and base lengths of 25 ft and 20 ft is 15 ft.
Area = (1/2) * (Base1 + Base2) * Height
In this case, the area is 337.5 ft², Base1 is 25 ft, and Base2 is 20 ft. We need to solve for the height, which represents the perpendicular distance between the bases.
Plugging in the known values into the formula:
337.5 = (1/2) * (25 + 20) * Height
Simplifying the expression:
337.5 = (1/2) * (45) * Height
Multiplying both sides of the equation by 2 to get rid of the fraction:
675 = 45 * Height
Dividing both sides by 45 to solve for the height:
Height = 675 / 45
Height = 15 ft
Therefore, the perpendicular distance between the bases of the trapezoid is 15 ft.
To learn more about trapezoid: https://brainly.com/question/1410008
#SPJ11
larry and julius are playing a game, taking turns throwing a ball at a bottle sitting on a ledge. larry throws first. the winner is the first person to knock the bottle off the ledge. at each turn the probability that a player knocks the bottle off the ledge is 1 2, independently of what has happened before. what is the probability that larry wins the game?(2015 amc 12b
The probability of Larry has a chance of winning the game is equal to 2/3
Let P be the probability that Larry wins the game.
Set up a system of equations based on the probabilities of each player winning on their turn,
P = 1/2 + 1/2 × (1 - P)
First term corresponds to Larry winning on his first turn, with probability 1/2.
The second term corresponds to Julius winning on his first turn, with probability 1/2,
And then Larry winning with probability (1 - P).
Since they are now in the same position as at the start of the game.
Simplifying the equation, we get,
⇒P = 1/2 + 1/2 - P/2
Multiplying both sides by 2, we get,
⇒2P = 1 + 1 - P
Simplifying further, we get,
⇒3P = 2
⇒ p = 2/3.
Therefore, the probability that Larry wins the game is equal to
P = 2/3.
Learn more about probability here
brainly.com/question/30154801
#SPJ4
Helps me please What is most likely to push the price of a company's stock higher?
O A. An increase in demand for the company's stock
OB. An increase in demand for the company's products
O C. An increase in tariffs paid by the company's competitors
O D. An increase in the exchange rate for the US dollar
SUBMIT
PREVIOUS
e to search
O
RI
The most likely factor to push the price of a company's stock higher is an increase in demand for the company's stock. Option A.
A stock's price will often increase when there is greater demand than there is supply. Various things, such as good news about the company's financial performance, new product releases or innovations, positive analyst reports, or general market trends, can contribute to this increased demand.
The company's financial performance may benefit from a rise in product demand, but if investors do not view it as a key growth engine for the business, it may not necessarily transfer into a higher stock price.
Learn more about stocks:
brainly.com/question/29750557
#SPJ4
What is the domain of the function y=^3/x-1?
The domain of the function y = (3/x) - 1 is all real numbers except x = 0
The domain of a function consists of all the valid input values for which the function is defined. In the case of the function y = (3/x) - 1, the only restriction on the domain arises from the presence of the variable x in the denominator.
To determine the domain, we need to find the values of x for which the expression 3/x is defined. Division by zero is undefined, so we must exclude any value of x that makes the denominator equal to zero.
In this case, we set the denominator, x, equal to zero and solve for x:
x = 0
Therefore, x cannot be equal to zero. All other real numbers are valid input values for this function. Therefore, the domain of the function y = (3/x) - 1 is all real numbers except x = 0. In interval notation, we can represent the domain as (-∞, 0) ∪ (0, ∞).
To learn more about domain
https://brainly.com/question/17021562
#SPJ11
through: (-2, 0) slope = 1
The equation of the line that passes though (-2, 0 and have a slope of 1 is y = x + 2.
How to find the equation of a line?The equation of a line can be represented in slope in intercept form as follows:
y = mx + b
where
m = slope of the lineb = y-interceptTherefore, the slope of a line is the change in the dependent variable with respect to the change in the independent variables.
Hence,
slope = 1 and the line passes through(-2, 0).
Therefore,
y = x + b
let's find b using (-2, 0)
0 = -2 + b
b = 2
Therefore, the equation is y = x + 2.
learn more on slope here:https://brainly.com/question/21967065
#SPJ1
Krissa exercises daily by walking. she aims to walk at a steady rate of 3.4 miles per hour.
a. if t represents time in hours and d represents distance in miles, write an equation that models the relationship between these variables.
b. use your equation to calculate the distance krissa will jog in 5/8 of an hour (round to the hundredths).
c. use your equation to calculate how long it will take for krissa to walk 5.44 miles.
When Krissa exercises daily by walking and she aims to walk at a steady rate of 3.4 miles per hour:
a) The equation is d = 3.4t;
b) Krissa will walk 2.13 miles;
c) It will take Krissa 1.6 hours to walk 5.44 miles.
What is a) the equation for Krissa's walking speed (d = 3.4t), and b) how far will she walk in 5/8 of an hour (2.13 mi), and c) how long to walk 5.44 miles (1.6 hours)?When Krissa exercises daily by walking and she aims to walk at a steady rate of 3.4 miles per hour:
a. The equation that models the relationship between time and distance is:
d = 3.4t
where d is the distance Krissa walks in miles and t is the time she spends walking in hours.
b. To calculate the distance Krissa will walk in 5/8 of an hour, we can substitute t = 5/8 into the equation from part a:
d = 3.4(5/8) = 2.125 miles
Therefore, Krissa will walk 2.125 miles in 5/8 of an hour, rounded to the hundredths.
c. To calculate how long it will take Krissa to walk 5.44 miles, we can rearrange the equation from part a to solve for t:
t = d/3.4
Substituting d = 5.44 into this equation, we get:
t = 5.44/3.4 = 1.6 hours
Therefore, it will take Krissa 1.6 hours to walk 5.44 miles.
Learn more about rate
brainly.com/question/14731228
#SPJ11
Please answer the question with the image provided.
Based on the information on the number line, the numbers that represent the percentages are: 42 (100%), 21 (50%), 63 (150%).
How to calculate the number that equals each percentage?To calculate the number that is equivalent to each percentage we must carry out the following procedure: Rule of three. In this case we must take into account that 42 represents 100% of the people.
100% = 42 people100% = ? people100 * 42 / 100 = 42 people100% = 42 people50% = ? people50 * 42 / 100 = 21 people100% = 42 people150% = ? people150 * 42 / 100 = 63 peopleLearn more about rule of three at: https://brainly.com/question/9264846
#SPJ1
What is the area of a 125 degree sector for a circle with a radius of 12 m, rounded to the nearest whole number
The area of the 125 degree sector for a circle with a radius of 12 m is approximately 158 square meters.
To find the area of a 125 degree sector of a circle with a radius of 12 m, we need to use the formula for the area of a sector:
Area of sector = (θ/360) x πr², where θ is the central angle of the sector, r is the radius of the circle, and π is a constant equal to approximately 3.14.
Substituting the given values, we get: Area of sector = (125/360) x π x 12² = (0.3472) x π x 144 = 158.03
Rounding to the nearest whole number, we get the area of the sector as 158 square meters. Therefore, the area of the 125 degree sector for a circle with a radius of 12 m is approximately 158 square meters.
To know more about area of circle, refer here:
https://brainly.com/question/28642423#
#SPJ11
Solve for length of segment c.
In the given diagram, using the intersecting secant theorem, the length of c is 2 cm
Intersecting secant theorem: Calculating the length of cFrom the question, we are to determine the length of segment c
From the intersecting secant theorem, we have that
If two secant segments intersect outside a circle, then the product of the secant segment with its external portion equals the product of the other secant segment with its external portion
Thus,
In the given circle, we can write that
a × b = c × d
Substitute the values
3 × 12 = c × 18
36 = c × 18
Divide both sides by 18
36 / 18 = (c × 18) / 18
2 = c
Therefore,
c = 2
Hence, the length of c is 2 cm
Learn more on Intersecting secant theorem here: https://brainly.com/question/26340897
#SPJ1
The FBI wants to determine the effectiveness of their 10 Most Wanted list. To do so, they need to find out the fraction of people who appear on the list that are actually caught. Step 2 of 2 : Suppose a sample of 455 suspected criminals is drawn. Of these people, 109 were captured. Using the data, construct the 85% confidence interval for the population proportion of people who are captured after appearing on the 10 Most Wanted list. Round your answers to three decimal places
The 85% confidence interval for the population proportion of people who are captured after appearing on the 10 Most Wanted list falls between 0.194 and 0.286.
To construct the 85% confidence interval for the population proportion of people who are captured after appearing on the 10 Most Wanted list, we can use the following formula:
[tex]\hat{p} \pm z^* \sqrt{\frac{\hat{p} (1 - \hat{p})}{n}}[/tex]
where [tex]$\hat{p}$[/tex] is the sample proportion, [tex]$n$[/tex] is the sample size, and [tex]$z^*$[/tex] is the z-score corresponding to the desired level of confidence. Since we are looking for an 85% confidence interval, the z-score is 1.440.
First, we can calculate the sample proportion:
[tex]\hat{p} = \frac{109}{455} = 0.240[/tex]
Next, we can plug in the values into the formula:
[tex]$$ 0.240 \pm 1.440 \sqrt{\frac{0.240 (1 - 0.240)}{455}} $$[/tex]
Simplifying this expression, we get:
[tex]$$ 0.240 \pm 0.046 $$[/tex]
Therefore, the 85% confidence interval for the population proportion of people who are captured after appearing on the 10 Most Wanted list is [tex]$(0.194, 0.286)$[/tex].
We can interpret this interval as follows: if we were to draw many samples of size 455 from the population of people who appear on the 10 Most Wanted list, and construct a 85% confidence interval for the proportion of people who are captured based on each sample, about 85% of these intervals would contain the true population proportion.
Furthermore, we are 85% confident that the true population proportion of people who are captured after appearing on the 10 Most Wanted list falls between 0.194 and 0.286.
To learn more about confidence interval refer here:
https://brainly.com/question/29680703
#SPJ11
A manufacturer makes sneakers in six colors, available in four styles, with three choices of
fabrics. how many unique types of sneakers does the manufacturer make?
To find the number of unique types of sneakers, we need to multiply the number of options for each characteristic:
Number of colors: 6
Number of styles: 4
Number of fabrics: 3
Total number of unique types of sneakers = 6 x 4 x 3 = 72
Therefore, the manufacturer makes 72 unique types of sneakers.
#SP11
AABC DEF. What sequence of transformations will move AABC onto ADEF?
A. A dilation by a scale factor of 2, centered at the origin, followed by
a reflection over the y-axis
B. The translation (x, y) - (x + 7, y), followed by a dilation by a scale
factor of 2 centered at the origin
C. A dilation by a scale factor of 2, centered at the origin, followed by
the translation
(x, y) - (x + 7, y)
D. A dilation by a scale factor of 2, centered at the origin, followed by
the translation (x, y) - (x + 7, y)
Answer:
D
Step-by-step explanation:
If you dilate the figure with the center at (0,0), the sides of the triangle will be twice as long. Then You translate the figure 7 units to the right.
Helping in the name of Jesus.
The correct statement is,
⇒ A dilation by a scale factor of 2, centered at the origin, followed by
the translation (x, y) → (x + 7, y)
What is Translation?A transformation that occurs when a figure is moved from one location to another location without changing its size or shape is called translation.
Since, Scale Factor is defined as the ratio of the size of the new image to the size of the old image.
If the scale factor is more than 1, then the image stretches.
If the scale factor is between 0 and 1, then the image shrinks.
If the scale factor is 1, then the original image and the image produced are congruent.
And, The only change in the dilation process is that the distance between the points changes.
It means that the length of the sides of the original image and the dilated image may vary.
Here, By dilation with factor 2 to the small triangle, its sides becomes equal as big triangle.
Now, center the small triangle at origin (0,0).
Then, transform the small triangle to (x + 7, y) i.e., it exactly gets the coordinates of the big triangle.
There are same in terms of sides length and coordinates.
Learn more about Scale factor and dilation here:
brainly.com/question/12233914
#SPJ5
Solve for X
X^2 + x - 6 = 0
Answer: There are two solutions to X.. x = -3 and x = 2
Step-by-step explanation:
In this case, a = 1, b = 1, and c = -6, so we have:
x = (-1 ± sqrt(1^2 - 4(1)(-6))) / 2(1)
x = (-1 ± sqrt(1 + 24)) / 2
x = (-1 ± sqrt(25)) / 2
The two solutions are x = (-1 + 5) / 2 = 2 and x = (-1 - 5) / 2 = -3. Therefore, the solutions to the equation X^2 + x - 6 = 0 are x = 2 and x = -3.
