Answer:
The force exerted by the block on the floor is 38.4 Newtons
Explanation:
The given parameters are;
The area of the box in contact with the floor, A = 2.4 m²
The pressure exerted by the block on the floor, P = 16 N/m²
The force exerted by the box on the floor is given as follows;
[tex]Pressure, P = \dfrac{Force, F}{Area, A}[/tex]
∴ F = P × A
From the question, P = 16 N/m², and A = 2.4 m²
∴ F = 16 N/m² × 2.4 m² = 38.4 N
The force exerted by the block on the floor, F = 38.4 N.
!!!!URGENT!!!! Which of these does not change with the increase in pressure?
A- Changing the number of particles
B- Changing the volume
C- Change the temperature
D- Changing the states of matter.
Answer:
a the number of particles
Explanation:
the volume will decrease because the particles are closer
if the particles are closer they generate more heat and thus can change their state of matter
HELP ME ANSWER THIS FOR 96 POINTS PLEASE!!
The three modified Atwood's machines shown below have blocks of mass M on a frictionless surface
and hanging from a string. When the blocks are released, they accelerate.
Rank them from smallest to largest and explain why in a short paragraph using the mass terms and force.
Answer:
Smallest - B
Largest - C
Middle - A
The hanging mass provides the force for accelerating the system.
In case A the force M G accelerates 2 * M
So you have for F = M a M * g = 2 * M * a or a = g / 2
In case B F = M a M * g = 3 * M * a and a = g / 3
In case C F = 2 * M * g 2 M * g = 3 * M * a and a = 2 * g / 3
Rank from smallest to largest force Smallest - B, Middle - A, Largest - C.
What is force?A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.
Smallest - B
Largest - C
Middle - A
The hanging mass provides the force for accelerating the system.
In case A the force M G accelerates 2 * M
So you have for F = M a M * g = 2 * M * a or a = g / 2
In case B F = M a M * g = 3 * M * a and a = g / 3
In case C F = 2 * M * g 2 M * g = 3 * M * a and a = 2 * g / 3
Rank from smallest to largest force Smallest - B, Middle - A, Largest - C.
To learn more about force refer to the link:
brainly.com/question/13191643
#SPJ2
How can knowing a chemical property such as flammability help you to use a product safely?
Answer:
When a substance burns, it produces new substances during a chemical change. Therefore, whether or not a substance is flammable is a chemical property. Knowing which substances are flammable helps you to use them safely. Another chemical property is how compounds react to light
Scott is making a chart to show the difference between chemical reactions and nuclear reactions. Which part of his chart is incorrect? Chemical Reaction Nuclear Reaction Line 1 Happens in the nucleus of atoms Happens between atoms Line 2 Forms new compounds Forms new atoms and radioactive particles Line 3 Involves small amounts of energy Involves large amounts of energy
Answer:
The incorrect part of the chart is;
Line 1
Chemical [tex]{}[/tex] Reaction [tex]{}[/tex] Nuclear Reaction
Line 1 Happens in the nucleus of atoms [tex]{}[/tex] Happens between atoms
Explanation:
The given chart can be presented as follows;
Chemical Reaction [tex]{}[/tex] Nuclear Reaction
1. Happens in the nucleus of atoms [tex]{}[/tex] Happens Between atoms
2. Forms new compounds [tex]{}[/tex] Forms new atoms
3. Involves small amounts of energy [tex]{}[/tex] Involves large amounts of energy
From the above chart, line 1 is incorrect because a chemical reaction happens between the valence electrons of the reacting atoms while a nuclear reaction is the reaction that takes place between the nucleus of two or more atoms or the nucleus of an atom and a subatomic particle to produce one or more than new nuclide of a new atom with a change in the mass of the nucleus being represented by the large amount of energy in the reaction. Therefore, a nuclear reaction takes place in the nucleus of an atom, forms new atoms and involves large amounts of energy
The correct arrangement is presented as follows;
Chemical Reaction [tex]{}[/tex] Nuclear Reaction
1. Happens Between atoms [tex]{}[/tex] Happens in the nucleus of atoms
Fishing boats use sonar to locate schools of fish. What characteristic of sound is most important for this application of sonar?
Sound waves reflect off some surfaces
Sound waves diffract around corners
Sound waves interfere when they overlap
Sound waves spread out from a source
Answer:
A sonar device sends pulses of sound waves down through the water. When these pulses hit objects like fish, vegetation or the bottom, they are reflected back to the surface. The sonar device measures how long it takes for the sound wave to travel down, hit an object and then bounce back up.
As a projectile travels down its trajectory path, it covers _____.
A. more distance each second
B. a distance that depends on how it was dropped
C. the same amount of distance each second
D. less distance each second
Answer:
it is C.
definitely C
Explanation:
if I am right.
plz help me out and give brainliest
help me which one is the right answer?
Answer:
The correct option is (b).
Explanation:
The ideal gas law is given by :
[tex]PV=nRT[/tex]
Where
P, V and T are pressure, volume and temperature of the gas
R is gas constant
[tex]V=\dfrac{nRT}{P}[/tex]
If n,R and P are constant,
[tex]V\propto T[/tex]
i.e.
At constant pressure, the volume of a gas is directly proportional to its temperature. Hence, the correct option is (b).
A 6 kg object has a speed of 24 m/s. What is its kinetic energy?
Explanation:
K.E = 1/2mv²
K.E = 1/2 * 6 * 24²
K.E = 1728J
Answer:
K.E = 1/2mv²
K.E = 1/2 * 6 * 24²
K.E = 1728J
Explanation:
PLEASE I NEED HELP
Best answer gets BRAINLIEST
A 3.23kg book falls off the top of a 3.01 m bookshelf. What is its kinetic energy right before it hits the ground? ( g= −9.81m/s2 )
Show work please
Answer:
K= 95.4 J
Explanation:
For this exercise we must use the conservation of mechanical energy.
We set a reference system on the floor.
Starting point. Higher
Em₀ = U = m g h
Final point. Just before taking the floor
Em_f = K = ½ m v²
energy is conserved because there is no friction
Em₀ = Em_f
mg h = K
The height is
h = y -y₀h = 0- y₀
let's calculate
K = 3.23 (-9.81) (-3.01)
K= 95.4 J
The international space station (ISS) orbits the earth with a velocity 7.6 km/s. How much energy is required to lift a payload of 2500 kg from the surface of the earth to the ISS
Answer:
7.22×10¹⁰ J
Explanation:
From the question given above, the following data were obtained:
Velocity (v) = 7.6 Km/s
Mass (m) = 2500 kg
Energy (E) =?
Next, we shall convert 7.6 Km/s to m/s. This can be obtained as follow:
1 km/s = 10³ m/s
Therefore,
7.6 Km/s = 7.6 Km/s × 10³ m/s / 1 km/s
7.6 Km/s = 7.6×10³ m/s
Finally, we shall determine the energy required as follow:
Velocity (v) = 7.6×10³ m/s
Mass (m) = 2500 kg
Energy (E) =?
E = ½mv²
E = ½ × 2500 × (7.6×10³)²
E = 1250 × 57760000
E = 7.22×10¹⁰ J
Thus, 7.22×10¹⁰ J of energy is required.
The Drop
How much time would a 4 kg ball take to fall 1.5 meters?
Answer:
t = 0.553
Explanation:
The mass has nothing to do with an object falling.
Givens
d = 1.5 m
a = 9.8
vi = 0
t = ?
Formula
d = vi * t + 1/2 a t^2
Solution
1.5 = 0 + 1/2 9.81 * t^2
1.5 = 4.905 t^2
1.5/4.905 = t^2
0.3058 = t^2
sqrt(t^2) = sqrt(0.3058)
t = 0.553
About 1/2 a second which is really surprising wouldn't you think?
Pedro uses a bar magnet to pick up a nail. He then touches the tip of the nail to some staples.
Answer:
B) The nail has become a temporary magnet, while the bar magnet remains a permanent magnet.
Explanation:
I hope this helped you ;)
ok this is the one i need help with but no
links bc i know its viruses
Answer:
polar covalent bonding
Explanation:
Water (H2O) is polar because of the bent shape of the molecule. The shape means most of the negative charge from the oxygen on side of the molecule and the positive charge of the hydrogen atoms is on the other side of the molecule. This is an example of polar covalent chemical bonding.
A 4 kg mass is moving at 8 m/s collides with a 2 kg mass moving at 5 m/s.
After the collision, both objects stick together, what is the velocity of the
two cars? *
Answer:
V = 7 m/s
Explanation:
Given that,
Mass 1, m₁ = 4 kg
Speed of the object 1, v₁ = 8 m/s
Mass 2, m₂ = 2 kg
Speed of object 2, v₂ = 5 m/s
After the collision, both objects stick together. Let V be the common velocity. Using the conservation of linear momentum to find it.
[tex]m_1v_1+m_2v_2=(m_1+m_2)V\\\\V=\dfrac{m_1v_1+m_2v_2}{m_1+m_2}\\\\V=\dfrac{4(8)+2(5)}{4+2}\\\\V=7\ m/s[/tex]
So, the velocity of two cars is 7 m/s.
If a 6V battery is connected to a light bulb whose resistance is 55,000Ω How much current will flow in the circuit?
Answer:
Current, I = 0.000109 Amps
Explanation:
Given the following data;
Voltage = 6V
Resistance = 55,000 Ohms
To find the current flowing through the circuit;
Ohm's law states that at constant temperature, the current flowing in an electrical circuit is directly proportional to the voltage applied across the two points and inversely proportional to the resistance in the electrical circuit.
Mathematically, Ohm's law is given by the formula;
[tex] V = IR[/tex]
Where;
V represents voltage measured in voltage.
I represents current measured in amperes.
R represents resistance measured in ohms.
Making current the subject of formula, we have;
[tex] I = \frac {V}{R} [/tex]
Substituting into the formula, we have;
[tex] I = \frac {6}{55000} [/tex]
Current, I = 0.000109 Amps
The _________ is the location of tectonic plate movement where an earthquake begins.
Answer:
Epicenter
Explanation:
The epicenter is the location of tectonic plate movement where an earthquake begins.
how far will an automobile move if 168000 j of work is created by 2000 n of force
Answer:
Distance = 84 meters
Explanation:
Given the following data;
Work done = 168,000 Joules
Force = 2,000 Newton
To find the distance covered by the automobile, we would use the formula;
[tex] Workdone = force * distance [/tex]
Substituting into the formula, we have;
[tex] 168000 = 2000 * distance [/tex]
[tex] Distance = \frac {168000}{2000} [/tex]
Distance = 84 meters
5) Apply according to the Law of Universal Gravitation, is there a stronger gravitational force between you and Earth or an elephant and Earth? Why?
Answer:
Elephant and the eath because Fg is determined by Mass of an object.. So elephant has greater mass therefore, it's Fg is higher
According the universal law of gravitation, the gravitational force is directly proportional to the mass of an object. An elephant weighs so much than a man and thus it will experience larger gravitational force from earth.
What is gravitational force?Gravitational force is a resistive force by which an object attracts other objects towards its centre of mass. The force exerted by the object depends on the mass and the force experienced by the other object depends on its mass and distance between the two objects.
According to universal law of gravitation, the gravitational force is directly proportional to the mass of the object and distance from the ground. The expression for the law is written as:
[tex]\rm g = G \frac{M_{1} M_{2}}{r^{2}}[/tex]
Where, G is the universal gravitational constant and M1 and M2 be the masses of two objects which and r be the distance between them. As per this relation gravity decreases with increase in distance and increase with an increase in mass.
Therefore, a massive body such as an elephant will experience greater gravitational force from the earth.
To find more on gravitation, refer here:
https://brainly.com/question/3009841
#SPJ5
38. How would you dilute a concentrated solution...
Answer:
Water
Explanation:
A dilution is a solution made by adding more solvent to a more concentrated solution (stock solution), which reduces the concentration of the solute. An example of a dilute solution is tap water, which is mostly water (solvent), with a small amount of dissolved minerals and gasses (solutes).
~Hope this helps
PLZ hurry! Thank you
A blu-ray player that is not playing still uses 6 W of power. What is the current into the blu-ray player if it is plugged into a standard 120V outlet?
Answer:do it again
Explanation:
It will work
if the volume of a fixed mass of hydrogen in a container is 30cm³ at a pressure of 50mmHg find the volume of the gas if the pressure is 60mmHg at constant pressure
25
Explanation:
P1V1=P2V2 hence 50×30=60v
V=1500÷60
V=25
draw the graph of the cooling curve of Naphtalene; hence discuss the cooling curve of Nephtalene
Answer:
soory but i cant under stand it proper can explain
what is the best thermal insulator? aluminum copper steel or glass
Answer:
Copper is a better heat conductor than glass. In general, we think of metals as good conductors. In fact, metals vary widely in their conductivity but, overall, they are better conductors of heat than most liquids and gasses. Other solids also vary in their capability to conduct heat.
Explanation:
The best thermal insulator is glass. The correct option is D.
What is thermal insulator?The prevention of heat transfer between surfaces that are in thermal contact or within a radiative influence zone is known as thermal insulation.
In addition to using the right item forms and materials, specially engineered technologies or processes can also be used to provide thermal insulation.
The term "thermal insulation" refers to the various ways we try to prevent heat from transferring from one object to another.
These two items could be the inside and outside of exterior walls in residential structures or the hot and cold faces of processing equipment in industrial settings.
Glass has a very small amount of unpaired electrons that are not in use, making it a good electrical insulator. Extremely strong electron interactions hold the atoms of glass together.
Thus, the correct option is D.
For more details regarding thermal insulator, visit:
https://brainly.com/question/23812426
#SPJ2
_______ is responsible for all the genetic material in living things. DNA Codon Anticodon Replication
A. DNA
B. Codon
C. Anticodon
D. Replication
In an experiment, you test whether the number of times you rub a cloth against a balloon changes how long it will stick against the wall. You start by rubbing the balloon 10 times with the cloth and stick it to the wall. You repeat this three times and record your results in a table.
Observation
Number of Times Balloon is Rubbed by Cloth Trial #1 Trial #2 Trial #3
10 6 seconds 20 seconds 20 seconds
What statement best reflects why you should do repeated trials in an experiment? (2 points)
a
Rubbing the balloon against a cloth 10 times produces very different results each time it is repeated.
b
The first trial is right because it is done with new materials that give the best results.
c
The second and third trials were wrong because they were very different from the first trial.
d
You would make a wrong conclusion if it were based on the first trial in the experiment.
Connecting a charged object to the ground creates a way for the charged object to leak that charge into the earth. This is called ?
Answer:
lightning KILLUAAAA
Is there a change in speed from when a tennis ball first starts bouncing to when it is near the end of the bounce? How can you tell? No links please!
Explanation:
The potential energy is stronger at the start of the bounce and when it is near the end bounce the balls accelerated rate will be lower because the force has decreased . Also I love your profile picture miraculous rocks !
What is
Magnetism ?
pls help
Answer:
A motion produced by electric charge which causes attractive and repulsive forces between objects.
a person travelled 350 m east from his home and returns back home an hour has displacement of_?
Answer:
vector of zero magnitude
Explanation:
The displacement is a vector magnitude, therefore, in addition to being a module, it has direction and sense.
In this case it moved 350 m and then returned the same 350 m, so the total displacement is zero.
If we draw the vector, one has a directional direction to the right and the other direction to the left, therefore when adding the two vectors gives a vector of zero magnitude
The speed of S-waves is what percent of that of P-Waves?
Help plz
Answer:
For the distance range 50 to 500 km, the S-waves travel about 3.45 km/s and the P-waves around 8 km/s.
hope it helps.
