Answer:
no one additions exceed the capacity of the buffer
Explanation:
given
Volume buffer = 500.0 mL = 0.5 L
mol HNO₂ = 0.5 L × 0.100 mol/L = 0.05 mol HNO₂
mol NO₂⁻ = 0.5 L × 0.150 mol/L = 0.075 mol NO₂⁻
solution
we know when any base more than 0.05 (HNO2) than exceed buffer capacity
and when any base more than 0.075 (KNO2) than exceed buffer capacity
when we add 250 mg NaOH (0.250 g)
than molar mass NaOH =40 g/mol
and mol NaOH = 0.250 g ÷ 40g/mol
mol NaOH = 0.00625 mol
0.00625 mol NaOH will be neutralized by 0.00625 mol HNO₂
so it would not exceed the capacity of the buffer.
and
when we add 350 mg KOH (0.350 g)
than molar mass KOH =56.10 g
and mol KOH = 0.350 g ÷ 56.10 g/mol
mol KOH = 0.0062 mol
here also capacity of the buffer will not be exceeded
and
now we add 1.25 g HBr
than molar mass HBr = 80.91 g/mol
and mol HBr = 1.25 g ÷ 80.91 g/mol
mol HBr = 0.015 mol
0.015 mol Hbr will neutralize 0.015 mol NO₂⁻
so the capacity will not be exceeded.
and
we add 1.35 g HI
molar mass HI = 127.91 g/mol
so mol HI = 1.35 g ÷ 127.91 g/mol
mol HI = 0.011 mol
capacity of the buffer will not be exceed
Help with 3.A and B image provided below
a. P=0.971 atm=737.6 mmHg
b. n=2.88 x 10⁻³
Further explanationDalton's law of partial pressures states that the total pressure of a mixture of gases is equal to the sum of the partial pressures of the component gases
[tex]\tt P_T=P_1+P_2+..P_n[/tex]
A. vapor pressure of water at 22.5 = 20.4 mmHg
Pt=P H₂ + P H₂O
758 = P H₂ + 20.4
P H₂=737.6 mmHg=0.971 atm
B.Ideal gas Law = PV=nRT
P = 0.971 atm
V = 72 ml = 0.072 L
R = 0.082 L/atm mol
T = 22.5 + 273.15 =295.65
[tex]\tt n=\dfrac{0.971\times 0.072}{0.082\times 295.65}=2.88\times 10^{-3}[/tex]
Which statement about hydrogen bonds is true?
Explanation:
Hydrogen bond is a type of intermolecular chemical bond formed between two molecules. It is classified as a special dipole-dipole attraction between polar molecules in which a hydrogen atoms is directly joined to a highly electronegative atom.
A hydrogen nucleus has a high concentration of positive charges. A hydrogen bond is actually an electrostatic attraction between the hydrogen atom (nucleus of one molecule and the electronegative atom, O or N or F) of a neighboring molecule. The strength of the bond depends on the relative electronegativity of the atom directly joined to the hydrogen. Hydrogen bonding forces is reflected in the physical properties of compounds such as water and ammonia.The proportion of the electronegativity of an atom that is directly hydrogen bonded to the hydrogen determines how strong the connection will be. This statement is true about hydrogen bonds.
An intermolecular chemical interaction known as a hydrogen bond is created when two molecules come together. When a hydrogen atom is linked directly to an atom that has a strong electronegative potential, it is categorised as a specific case of dipole-dipole attraction among polar molecules.
A hydrogen bond is essentially an electrostatic attraction among a neighbouring molecule's O, N, or F atom and its hydrogen atom, which is the nucleus of one of the molecules.
The proportion of the electronegativity of an atom that is directly bonded to the hydrogen determines how strong the connection will be.
Compounds like water and ammonia have physical characteristics that are influenced by hydrogen bonding forces.
To know more about hydrogen bond, here:
https://brainly.com/question/30885458
#SPJ6
What causes your skin to feel warm when it is in the sun on a summer day?
A Particles in the atmosphere reflect energy from the Sun downward.
B Hot particles from the Sun still carry some heat when they reach your skin.
C The solar wind carries heated air from the Sun's atmosphere to Earth's surface.
D The Sun radiates energy that passes through space and the atmosphere to your skin.
Answer:
idek akxkkwskkd nwkdkekekd
Help??
How many grams of sodium chloride decompose to yield 15 grams of chlorine gas?
2NaCl → 2Na+ Cl2
A- 12.363 9 Naci
B- 49.453 g Naci
C- 30 g NaCl
D- 0.846 g Naci
Answer:
Mass of sodium chloride decomposed = 24.54 g
Explanation:
Given data:
Mass of sodium chloride decomposed = ?
Mass of chlorine gas formed = 15 g
Solution:
Chemical equation:
2NaCl → 2Na + Cl₂
Number of moles of Cl₂:
Number of moles = mass/molar mass
Number of moles = 15 g/ 71 g/mol
Number of moles = 0.21 mol
Now we will compare the moles of Cl₂ with NaCl from balance chemical equation.
Cl₂ : NaCl
1 : 2
0.21 : 2×0.21 = 0.42 mol
Mass of Sodium chloride decompose:
Mass = number of moles × molar mass
Mass = 0.42 mol × 58.44 g/mol
Mass = 24.54 g
The Venmo diagram compares protons with electrons. Which shared property belongs in the region marked B?
In a classroom, which comparison would a teacher most likely use for describing a mole?
a cup of water and a liter of oil
a dozen eggs and a dozen jellybeans
a jar of jellybeans and a gram of salt crystals
20 marbles in a bag and 10 large ice cubes
Answer:
B
Explanation:
a mole is "a chemist's dozen" lol
what are 4 ways a mineral can form
Answer:
The four main categories of mineral formation are: (1) igneous, or magmatic, in which minerals crystallize from a melt, (2) sedimentary, in which minerals are the result of sedimentation, a process whose raw materials are particles from other rocks that have undergone weathering or erosion, (3) metamorphic, in which new minerals form at the expense of earlier ones owing to the effects of changing—usually increasing—temperature or pressure or both on some existing rock type, and (4) hydrothermal, in which minerals are chemically precipitated from hot solutions within Earth.
The mineral can be formed from volcanic gases, oxidation, crystallization from magma, sediment formation, or deposition from a saline fluid.
What is a mineral?A rock can be described as a collection of minerals. A rock that becomes so hot it melts and many minerals come out in liquids that are hot enough to melt rocks.
Magma can be defined as a melted rock inside Earth, a molten mixture of substances that can be hot to more than 1,000°C. When the magma cools slowly inside the earth, which provides mineral crystals time to grow large enough.
Granite is a rock that produces from slowly cooled magma, consisting of the minerals quartz, plagioclase feldspar which is shiny white, pink potassium feldspar, and black biotite.
When magma will erupt onto the surface of the Earth, it is known as lava. Lava cools more rapidly than magma when it is below the surface and mineral crystals do not have time to form. But the chemical composition remains the same as if the magma cooled slowly.
The mineral can be formed through hydrothermal processes, weathering, and metamorphic and igneous environments.
Learn more about minerals, here:
https://brainly.com/question/1333886
#SPJ2
How many grams of hydrogen chloride are in 50. mL of 11 M HCl solution?
Answer:
20,075 g
Explanation:
Solution at attachment box
Firstly i found the mole of HCLwhich we needed
After that I found the gram of HCL which we needed
M.V=n
The mass of hydrogen chloride present in 50. mL of 11 M HCl solution is 20.08g. Details about mass can be found below.
How to calculate mass?The mass of a substance can be calculated by multiplying the number of moles of the substance by its molar mass.
However, the number of moles of Hydrogen chloride must be calculated first as follows:
Molarity = no of moles/volume
no of moles = 11M × 0.05L
no of moles = 0.55mol
mass of HCl = 0.55 mol × 36.5g/mol
mass of HCl = 20.08g
Therefore, the mass of hydrogen chloride present in 50. mL of 11 M HCl solution is 20.08g.
Learn more about mass at: https://brainly.com/question/15164682
What are the oxidation numbers of the atoms in this reaction?
Check all that apply.
Mg(s) + 2HCl(aq) → MgCl2(aq) + H2(g)
0 for Mg in Mg and MgCl2
0 for Mg(s) and H in H2
+1 for H in HCl
-1 for Cl in HCl
+2 for Mg in MgCl2
Answer:
2-5
Explanation:
I just did it.
The oxidation numbers of the atoms in this reaction are 0 for Mg(s) and H in H₂, -1 for Cl in HCl, +1 for H in HCl and +2 for Mg in MgCl₂
What is oxidation number?An oxidation number is a number assigned to atoms in molecules to show the general distribution of the electrons.
Oxidation state or number helps us describe the transfer of electrons.
The oxidation number/state is also used to determine the changes that occur in redox reactions.
Overall, the oxidation number of an atom in a molecule is the charge that the atom would have if all polar covalent and ionic bonds resulted in a complete transfer of electrons from the less electronegative atom to the more electronegative one.
Therefore, The oxidation numbers of the atoms in this reaction are 0 for Mg(s) and H in H₂, -1 for Cl in HCl, +1 for H in HCl and +2 for Mg in MgCl₂
Learn more about Oxidation number, here:
https://brainly.com/question/29263066
#SPJ2
Part C
What is a useful application for this new material?
Answer:
The new material Emily invented allows scratches to be repaired quickly, so it would be useful on cars and other surfaces that experience a lot of wear.
Explanation:
I got this right on Plato\Edmentum
Answer:
The new material Emily invented allows scratches to be repaired quickly, so it would be useful on cars and other surfaces that experience a lot of wear.
Explanation:
What common factor is responsible for three of the
four erosional processes pictured?
A. wind
B. heat
C. human intervention
D. gravity
Answer:
D. gravity
hope this helps
what is the molar ratio of h2 to h2o
Answer:
The balanced equation is 2H2 + O2 –> 2 H2O. It takes two hydrogen atoms for every oxygen atom to produce this reaction, so the mole ratio between hydrogen and oxygen is 2:1.
Answer:
2:1
Explanation:
I forgot the explanation of this, but I remembered the answer
NEED ANSWERS NOW 100 PTS
Is iron iii fluoride ionic or covalent
Is carbon disulfide ionic or covalent
Answer:
iron i believe is ionic and carbon is covalent
Explanation:
if im wrong correct me
How much (mL) of a 2.0 M sodium hydroxide solution would it take to neutralize 50 mL of a 6.0 M solution of hydrochloric acid?
Answer:
150ml
Explanation:
For this question,
NaOH completely dissociates. It is a strong base
HCl also completely dissociates. It is a strong acid
So we have this equation
m1v1 = m2v2 ----> equation 1
M2 = 2m
V1= ??
M2 = 6m
V2 = 50m
When we input these into equation 1, we have:
2m x v1 = 6m x 50ml
V1 = 6m x 50ml/2
V1 = 300/2
V1 = 150ml
Therefore NaOH that is required to neutralize the solution of hydrochloric acid is 150ml.
Thank you
I NEED HELP THIS IS FROM MY HOMWORK DUE IN A HOUR
Answer:
Increasing the speed of the particles
Explanation:
The energy absorbed in the phase B is used to increase the speed of the particles.
We can see a positive slope which shows that the temperature is increasing considerably with increasing time.
At this phase the reaction rate is become faster as the temperature change has a considerable effect on reaction rates.
Temperature is directly proportional to the average kinetic energy of reacting particles.
A 100.0 lb skier moves at 40.00miles/hour. Calc her kinetic energy.
answer: its 7290 joules.
explanations: the first procedure is to convert 1 pound to kilogram. 1 kg = 2.205 hence given 100 lb so we cross multiply. 1 kg * 100 = 2.205 * x
hence x= 45 kg. let's convert 1 mile per hour = 0.45 metre per second we cross multiply by 40 mile per hour. x= 40 * 0.45= 18 m/s.
KE= 1/2 * 45 * (18)^2
= 1/2 * 45 * 14580
= 7290joules
Most of the elements on the Periodic Table are found in nature as
nitric acid, HNO3, and calcium hydroxide, Ca(OH)2
net ionic equation:
Answer:
2H⁺ (aq) + 2OH⁻ (aq) → 2H₂O (l)
General Formulas and Concepts:
Solubility RulesStrong Acids/BasesExplanation:
Step 1: RxN
HNO₃ (aq) + Ca(OH)₂ (aq) → Ca(NO₃)₂ (aq) + H₂O (l)
Step 2: Balance RxN
2HNO₃ (aq) + Ca(OH)₂ (aq) → Ca(NO₃)₂ (aq) + 2H₂O (l)
Step 3: Ionic Equations
Total Ionic Equation:
2H⁺ (aq) + 2NO₃⁻ (aq) + Ca²⁺ (aq) + 2OH⁻ (aq) → Ca²⁺ (aq) + 2NO₃⁻ (aq) + 2H₂O (l)
Cancel out spectator ions.
Net Ionic Equation:
2H⁺ (aq) + 2OH⁻ (aq) → 2H₂O (l)
1. How is 120,700 written in scientific notation?
A. 120.7. 103
B. 12.07. 104
C. 1.207.105
D. 0.1207.106
Answer:
Option B
Explanation:
In order to find the answer to this question you need to move the decimal point as many times as the exponent, positive exponent to the right and negative exponent to the left. In this case we have all positive exponents meaning we move all of them to the right but they all equal the same thing. The most logical answer to this question is option B "10.07×10^4" because the equation is balanced.
Hope this helps.
what is a stethoscope
Explanation:
A stethoscope is used to listen to sounds that the heart , lungs , blood flow , intestines make.
What happens when the compound MgO is formed?
Answer:
Oxygen receives two electrons from magnesium
Explanation:
How many grams of methane gas occupy a volume of 11.2 liters at stp
Answer:
see the pic for the answer
7.91 grams of methane gas occupy a volume of 11.2 liters at STP.
What is STP?
Standard temperature and pressure, abbreviated STP, refers to nominal conditions in the atmosphere at sea level.
First, we need to calculate the number of moles:
STP is 0 °C and 1 bar.
One mole of a gas at STP has a volume of 22.71 L .
Moles of CH₄ = 11.2 L × ([tex]\frac{1 mol}{22.71 L}[/tex])
Moles of CH₄ = 0.4932 mol
Now we will calculate the mass of CH₄
Moles = [tex]\frac{mass}{molar \;mass}\\[/tex]
Mass of CH₄ = 0.4932 × 16.03
Mass of CH₄ = 7.91 g
Hence, 7.91 grams of methane gas occupy a volume of 11.2 liters at STP.
Learn more about the STP here:
https://brainly.com/question/21207220
#SPJ2
Suppose that you are a scientist who studies climate changes. While examining the rings of tree trunks, you notice several very large tree rings. What can you conclude about the climate during those years?
Answer:
The climate was wet and cold
Explanation:
Answer:
The large tree rings allow you to conclude that the climate was either very warm or wet during those growing seasons, because greater than normal growth occurred.
Explanation: It is the edge sample response
Of the following, which element has the highest first ionization energy?
S
F
CI
O
Answer:
F
General Formulas and Concepts:
Ionization Energy (I.E): Amount of energy (joules) needed to remove an electron from the atomPeriodic TrendsExplanation:
The trend for 1st I.E increases to the right and up. Therefore, the top right corner of the Periodic Table would have the highest 1st I.E.
Oxygen and Fluorine are in Period 2 while Sulfur and Chlorine are in Period 3. We then know that Oxygen and Fluorine will have higher I.E's than Sulfur and Chlorine.
Oxygen is in Group 16 while Fluorine is in Group 17. Since Fluorine is farther to the right of the Periodic Table, it will have the highest I.E out of all 4 elements.
The reason why F has a larger I.E than O is because F has a larger Zeff. Since Fluorine has more protons in the nucleus than O, the FOA between the nucleus and the e⁻ are greater than those of O. Therefore, it takes more energy to remove an e⁻ from F than O.
The reason why F has a larger I.E than S and Cl is because S and Cl have more shielding effect than F. Since S and Cl has more core e⁻, it weakens the FOA between the nucleus and the outermost shell e⁻, thus making it easier to remove. F has less core e⁻ and therefore there is less of a shielding effect and thus the FOA is larger and requires more energy to remove.
Write the balanced net ionic equation for the reaction of aqueous sodium sulfate with aqueous lead(II) nitrate. Include phases.
net ionic equation:
Answer:
SO₄²⁻ (aq) + Pb²⁺ (aq) → PbSO₄ (s)
General Formulas and Concepts:
Solubility RulesExplanation:
Step 1: RxN
Na₂SO₄ (aq) + Pb(NO₃)₂ (aq) → PbSO₄ (s) + NaNO₃ (aq)
Step 2: Balance RxN
Na₂SO₄ (aq) + Pb(NO₃)₂ (aq) → PbSO₄ (s) + 2NaNO₃ (aq)
Step 3: Ionic Equations
Total Ionic Equation:
2Na⁺ (aq) + SO₄²⁻ (aq) + Pb²⁺ (aq) + 2NO₃⁻ → PbSO₄ (s) + 2Na⁺ (aq) + 2NO₃⁻ (aq)
Cancel out spectator ions.
Net Ionic Equation:
SO₄²⁻ (aq) + Pb²⁺ (aq) → PbSO₄ (s)
What is the formula for Copper i Monohydrogen Phosphate?
Answer:
Na2HPO4
Explanation:
The chemical formula for Copper I Monohydrogen Phosphate is CuHPO₄.
Let's break down the formula to understand it better:
1. "Cu" represents copper, which is an element with the atomic symbol Cu. Copper is a transition metal that is commonly used in electrical wiring and plumbing.
2. "H" represents hydrogen, which is an element with the atomic symbol H. Hydrogen is the lightest and most abundant element in the universe.
3. "PO₄" represents the phosphate ion, which is composed of one phosphorus atom (P) and four oxygen atoms (O). The phosphate ion is commonly found in biological systems and is an essential component of DNA, RNA, and ATP.
So, when combined one copper atom (Cu), one hydrogen atom (H), and one phosphate ion (PO₄), get the formula CuHPO4, which represents Copper I Monohydrogen Phosphate.
It's important to note that the "I" in Copper I refers to the charge of the copper ion in this compound. Copper can form different ions with different charges, and the Roman numeral indicates the charge of the copper ion in this particular compound.
Thus, chemical formula for Copper I Monohydrogen Phosphate is CuHPO₄.
Learn more about chemical formula,here:
https://brainly.com/question/32018188
#SPJ4
The Lewis representation above depicts a reaction between hydrogen (blue) and a main-group element from group 5A (red). In this representation, each Y atom needs electron(s) to complete its octet, and gains these electrons by forming bond(s) with atoms of H . There are unshared electron pair(s) and bonding electron pair(s) in the product molecule. The bonds in the product are _________ .
Answer:
Each Y atom needs three electrons to complete its octet by forming three bonds to hydrogen. There is one unshared pair of electrons and three bonding pairs of electrons. The bonds in the product are covalent.
Explanation:
Recall that group 5A elements contain five electrons in their outermost shell. These five electrons consists of a lone pair and three electrons that can form three bonds with hydrogen to give YH3 where Y is the group 5A element.
The YH3 molecule contains one lone(unshared) pair of electrons as well as three bonding pairs of electrons. The compounds are covalent.
According to valence bond theory, which atomic orbitals of carbon may be hybridized to account for bonding? Why?
.
A. Only 2p orbitals may hybridize; the 2p orbital is carbon’s highest-energy atomic orbital.
B. Only 1s and 2s orbitals of carbon may hybridize; each contains electrons to share in bonding.
C. Only 2s and 2p may hybridize; these orbitals contain valence electrons used in bonding.
D. Only 2s orbitals may hybridize; these orbitals contain valence electrons.
E. 1s, 2s, and 2p orbitals all may hybridize; these orbitals are of the same phase
Answer:
C. Only 2s and 2p may hybridize; these orbitals contain valence electrons used in bonding.
Explanation:
Carbon has four valence electrons (2s² 2p²), in several organic compounds it forms four bonds and as this element has two types of orbitals to join, 2s and 2p, it is expected that a compound like methane has two types of C-H bonds, but this is not the case, as all its orbital atoms are the same.
In a process called hybridization, s orbitals and p orbitals are combined in an atom. Depending on the amount of p orbitals that are combined, the hybrid orbitals can be sp (one orbital 2s and one 2p are combined), sp² (the 2s orbital combines with two 2p orbitals) and sp³(the orbital 2s combines with three 2p orbitals).
The carbon atom has the presence of 6 electrons. The valence bond theory hybridized the 2s and 2p orbital for the bonding, as they have valence bonds.
What is valence bond theory?The valence bond theory has been the atomic hybridization of the atoms that results in the formation of the bonds.
The carbon atom has 4 valence electrons present in the bonding valence orbitals. The orbitals combine as sp, sp2, sp3 orbital in order to form the bond.
Thus, since there has been the presence of valence electrons in the s and p orbitals, the 2s and 2p are involved in the hybridization. Hence, option C is correct.
Learn more about valence bond theory, here:
https://brainly.com/question/10035437
In which statement does the word theory mean scientific theory?? A) In theory, the experiment will work as planned. B) She has a theory about why the storm arrived later than predicted. C) The atomic theory explains that material objects are made up of atoms. D) The doctor’s prescription for curing a cold is based on his best theory or guess.
Answer: C
Explanation:
I took a quiz on this.
Everything in outer space including stars, planets, and galaxies
O A. Solar System
B. Universe
OC. Galaxy
D. Biosphere
I
Answer:
Universe.
Explanation:
Biosphere is just a planet. Solar system contains planets and star. Galaxy holds multiple solar systems only. Universe hold everything, biospheres, solar systems, and galaxies. I hope this helps :D
Answer:
B.
Explanation:
A solar system is IN a galaxy. Its not A.
A Galaxy doesnt have other galaxies in it. Its not c
A biosphere is only referring to earth. its not D.
Therefore, it is B. A universe is everything in outer space including stars, planets, and galaxies.
