25) What occurs when an atom loses an electron?
A) The atom's radius decreases and the atom becomes a negative ion.
B) The atom's radius decreases and the atom becomes a positive ion.
C) The atom's radius increases and the atom becomes a negative ion.
D) The atom's radius increases and the atom becomes a positive ion.

The formulae of the hydroxides are: X(OH), Y(OH)₂, and Z(OH)₃.

The formulae of the sulphates are: XSO₄, YSO₄, and Z(SO₄)₂.

The formulae of the carbonates are: XCO₃, YCO₃, and Z(CO₃)₂.

The formulae of the hydrogen carbonates are: X(HCO₃), Y(HCO₃)₂, and Z(HCO₃)₃.

The formulae of the nitrates are: X(NO₃), Y(NO₃)₂, and Z(NO₃)₃.

The formulae of the phosphates are: X(PO₄), Y(PO₄)₂, and Z(PO₄)₃.

The valency of a metal tells us how many electrons it can lose or gain in order to form an ion. Using the valencies of metals X, Y, and Z, we can determine the formulae of their compounds with different anions. In each case, we use the appropriate valency of the metal and the valency of the anion to balance the charges of the compound.

For example, in the case of hydroxides, the valency of metal X is 1, which means it can combine with one hydroxide ion (OH⁻) to form a neutral compound, X(OH). Similarly, for metal Y with valency 2, it requires two hydroxide ions to form a neutral compound, Y(OH)₂.

To know more about the Metal, here

https://brainly.com/question/23442676

#SPJ4

The mass of the zinc hydroxide that we need for the reaction is about  21.8 g.

The equation of a reaction is a chemical equation that represents the chemical change that occurs during a chemical reaction. It is typically written in the form:

Reactants → Products

where the reactants are the starting materials and the products are the substances that are formed as a result of the reaction.

The equation of the reaction is;

Zn(OH)2 + H2SO4 → ZnSO4 + 2H2O

Number of moles of H2SO4 = 21.1 g/98 g/mol

= 0.22 moles

If the reaction is 1:1,

Mass of the Zn(OH)2 required = 0.22 moles * 99 g/mol

= 21.8 g

Learn more about reaction:https://brainly.com/question/28984750

#SPJ1

Answer:

false

Explanation:

magnetic field lines can be accurately observed using *iron filling*

To calculate the enthalpy of fusion and percent error for each of your three trials. Here are the steps to calculate each value:

1. Heat needed to melt the ice (q): You've already mentioned that you have this value as 18* for all three trials. I'm assuming this is in joules (J).

2. Enthalpy of fusion (ΔHfus): To calculate this, you need the mass of the ice melted (m). You mentioned that you're not sure how to find the mass of the ice melted. Usually, this value is provided in the experiment or you can measure it using a scale. Once you have the mass, use the following formula:

ΔHfus = q / m

3. Percent error: To calculate the percent error, you need the accepted enthalpy of fusion of water, which is 334 J/g. Use the following formula:

Percent error = (|calculated ΔHfus - accepted ΔHfus| / accepted ΔHfus) × 100

Now, perform these calculations for each of your three trials. Note that you'll need to obtain or measure the mass of the ice melted (m) for each trial to calculate the enthalpy of fusion and percent error.

To know more about Enthalpy of fusion:

https://brainly.com/question/28180072

#SPJ11

The energy required to heat 70.0 g of water from 18°C to boiling (100°C) is 24,518.56 J.

Using the heat exchange formula,

q = mcΔT, mass of water is m, specific heat is c and temperature change is ΔT. For water, the specific heat capacity is 4.184 J/g·°C. The temperature change is,

ΔT = (100°C - 18°C) = 82°C

Therefore, the amount of energy required to heat 70.0 g of water from 18°C to boiling is,

q = m × c × ΔT

q = (70.0 g) × (4.184 J/g·°C) × (82°C)

q = 24,518.56 J

Therefore, the energy required to heat the beaker of water is 24,518.56 J.

To know more about Heat change, visit,

https://brainly.com/question/28912732

#SPJ4

Approximately 148.8 g of KNO₃ is needed to create a saturated solution at 60°C in 240.0 mL of distilled water.

The mass of KNO₃ needed to create a saturated solution at 60°C in 240.0 mL of distilled water depends on the solubility of KNO₃ at that temperature.

The solubility of KNO₃ in water increases with temperature. At 60°C, the solubility of KNO₃ is approximately 62 g per 100 mL of water.

Thus, the quantity of KNO₃ required to form a saturated solution in 240.0 mL of water can be determined using the following procedure.:

Mass of KNO₃ = (62 g/100 mL) x (240.0 mL) = 148.8 g

To know more about price solubility, refer here:

https://brainly.com/question/17647006#

#SPJ11

Answer:

106.5 J, and it was lost.

Explanation:

To calculate the amount of heat transferred, we can use the following formula:

Q = m * c * ΔT

where Q is the amount of heat transferred, m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature.

For graphite, the specific heat capacity is approximately 0.71 J/g°C.

So we have:

Q = 15.0 g * 0.71 J/g°C * (-10°C)

Q = -106.5 J

The negative sign of the answer indicates that the graphite lost heat, since its temperature decreased. Therefore, the heat was transferred from the graphite to its surroundings.

So the amount of heat transferred from the graphite was 106.5 J, and it was lost.

A solution consists of 2.50 moles of NaCl dissolved in 100 grams of H₂0 at 25°C. Compared to the boiling point and freezing point of 100 grams of H₂0 at standard pressure, the solution at standard pressure has a lower boiling point and a higher freezing point. The correct option is A.

When a solute, such as NaCl, is dissolved in a solvent, such as water, the boiling point of the solution is raised and the freezing point is lowered. This phenomenon is known as boiling point elevation and freezing point depression.

The extent of the change in boiling point and freezing point depends on the concentration of the solute in the solution. In this case, the solution consists of 2.50 moles of NaCl dissolved in 100 grams of H₂O. This concentration of NaCl will cause the solution to have a lower boiling point and a higher freezing point compared to pure water.

The reason is that the NaCl molecules dissociate into ions when dissolved in water, which increases the number of particles in the solution and lowers the vapor pressure, making it more difficult for the solution to boil. Additionally, the presence of the solute disrupts the formation of crystal lattice structures in the solvent, causing a decrease in the freezing point. Hence, option A is correct.

To know more about solute, refer here:

https://brainly.com/question/13812915#

#SPJ11

The metabolism of an acetyl CoA molecule produces a total of 12 ATP molecules through the process of cellular respiration.

The metabolism of one acetyl  molecule through the Krebs cycle can produce 1 ATP molecule through substrate-level phosphorylation. In addition, the oxidation of NADH and FADH2 produced during the Krebs cycle can generate more ATP through oxidative phosphorylation in the electron transport chain.

However, the exact amount of ATP generated through oxidative phosphorylation depends on various factors, such as the efficiency of the electron transport chain and the availability of oxygen. Overall, the complete metabolism of one molecule of acetyl CoA can generate up to 10 ATP molecules through oxidative phosphorylation.

This occurs through the citric acid cycle and the electron transport chain, which are both part of the metabolic pathway that converts energy from glucose into usable ATP molecules.

To know more about ATP molecules, visit:

https://brainly.com/question/12277357#

#SPJ11

To make a 1.5 L solution of 0.35 M HCl using 16.0 M HCl, you will need 32.81 mL of concentrated acid.

1. Use the dilution formula: M1V1 = M2V2

2. M1 is the initial concentration (16.0 M), V1 is the volume of concentrated acid needed, M2 is the final concentration (0.35 M), and V2 is the final volume (1.5 L).

3. Plug in the values: (16.0 M)(V1) = (0.35 M)(1.5 L)

4. Solve for V1: V1 = (0.35 M)(1.5 L) / 16.0 M

5. V1 = 0.0328125 L, which is equal to 32.81 mL.

6. So, 32.81 mL of concentrated 16.0 M HCl is needed to make the 1.5 L solution of 0.35 M HCl.

To know more about concentrated acid click on below link:

https://brainly.com/question/30327123#

#SPJ11

The volume of dichloromethane [tex](CH_2Cl_2)[/tex] produced when 149 liters of methane [tex](CH_4)[/tex] react according to the given reaction is approximately 6.224 x [tex]10^5 J/K*m^3[/tex].  

The volume of dichloromethane [tex](CH_2Cl_2)[/tex] produced when 149 liters of methane [tex](CH_4)[/tex] react according to the given reaction is not immediately apparent from the reaction stoichiometry.

The balanced equation for the reaction between methane  [tex](CH_4)[/tex] and carbon tetrachloride (CCl4) to form dichloromethane  [tex](CH_2Cl_2)[/tex] and carbon dioxide (CO2) is:

[tex](CH_4)[/tex] +  [tex]CO_2[/tex] →  [tex](CH_2Cl_2)[/tex] +  [tex]CO_2[/tex]

The balanced equation shows that 1 mole reacts with 1 mole of CCl4 to produce 1 mole of  [tex](CH_2Cl_2)[/tex] and 1 mole of  [tex]CO_2[/tex].

The volume of the gas can be calculated using the ideal gas law:

PV = nRT

To find the number of moles of gas, we can use the molecular masses of the reactants and products:

Molar mass of  [tex](CH_4)[/tex] = 16.04 g/mol

Molar mass of  [tex]CCl_4[/tex] = 89.9 g/mol

Molar mass of   [tex](CH_2Cl_2)[/tex] = 70.1 g/mol

Molar mass of  [tex]CO_2[/tex] = 44.01 g/mol

The number of moles of  [tex](CH_4)[/tex] can be calculated from the initial amount of gas:

149 L of CH4 = 149 x 16.04 g/mol = 2432 g

The number of moles of CCl4 can be calculated from the given volume:

149 L of  [tex](CH_4)[/tex] +  [tex]CCl_4[/tex] →   [tex](CH_2Cl_2)[/tex] +  [tex]CO_2[/tex]

The volume of the gas is given as 149 L, so the number of moles of  [tex]CCl_4[/tex] can be calculated as:

149 L = 149 x 89.9 g/mol = 13,277 g

The number of moles  can be calculated from the given volume and the desired amount of product

149 L of  [tex](CH_4)[/tex] + [tex]CCl_4[/tex] →   [tex](CH_2Cl_2)[/tex] + [tex]CO_2[/tex]

149 L of  [tex](CH_4)[/tex] + [tex]CCl_4[/tex] → 149 x 70.1 g/mol + 13,277 g x 1 mol/13.277 g = 43,691 g

V = nRT

V = 43,691 g x 8.314 J/mol·K = 364,617.5 J/K

1 J/K = 1/1000 L·K

Therefore, the volume of the gas is:

V = 364,617.5 J/K x (1/1000 L·K) = 3.646 x 10^4 L

substitute this value for V in the equation for the volume of  [tex](CH_2Cl_2)[/tex] :

PV = nRT

PV = 149 x 8.314 J/mol·K x (3.646 x [tex]10^4[/tex] L)

PV = 6.224 x   [tex]10^5 J/K*m^3[/tex].  

Therefore, The volume of dichloromethane [tex](CH_2Cl_2)[/tex] produced when 149 liters of methane [tex](CH_4)[/tex] react according to the given reaction is approximately 6.224 x [tex]10^5 J/K*m^3[/tex].  

Learn more about dichloromethane Visit: brainly.com/question/31080842

#SPJ4

The molarity of the potassium carbonate solution is 3.29 M, rounded to three significant figures.

From the balanced chemical equation, we can see that the reaction between lead(II) nitrate and potassium carbonate has a 1:1 stoichiometry. This means that the number of moles of lead(II) nitrate and potassium carbonate that react must be equal.

First, we need to calculate the number of moles of lead(II) nitrate present in the 64.4 mL of 2.56 M solution:

moles of [tex]Pb(NO3)2[/tex] = Molarity x Volume (in L)

moles of [tex]Pb(NO3)2[/tex] = 2.56 M x 0.0644 L

moles of [tex]Pb(NO3)2[/tex] = 0.165 M

Since the stoichiometry of the reaction is 1:1, the number of moles of potassium carbonate must also be 0.165 moles. We can use this information to calculate the molarity of the potassium carbonate solution:

moles of [tex]K2CO3[/tex] = Molarity x Volume (in L)

0.165 mol = Molarity x 0.0502 L

Molarity = 0.165 mol / 0.0502 L

Molarity = 3.29 M

Therefore, the molarity of the potassium carbonate solution is 3.29 M, rounded to three significant figures.

To know more about molarity  refer to-

https://brainly.com/question/8732513

#SPJ11

The original pressure in the container was 9.028 atm.

To solve this problem, we need to use the combined gas law equation, which relates the pressure, volume, and temperature of a gas. The equation is P1V1/T1 = P2V2/T2, where P1 and V1 are the initial pressure and volume, respectively, and P2 and V2 are the final pressure and volume, respectively.

We are not given the temperature, so we can assume that it is constant.

First, we can rearrange the equation to solve for P1:
P1 = (P2V2/T2) * T1/V1

Substituting the given values, we get:
P1 = (6.10 atm * 3.7 L) / (2.5 L * T2) * T1

Since the temperature is constant, we can cancel it out, and the equation becomes:
P1 = (6.10 atm * 3.7 L) / (2.5 L)

Simplifying, we get:
P1 = 9.028 atm

Therefore, the original pressure in the container was 9.028 atm.

To know more about original pressure, visit:

https://brainly.com/question/1132289#

#SPJ11

Answer:

Sedimentation equilibrium in a suspension of different particles, such as molecules, exists when the rate of transport of each material in any one direction due to sedimentation equals the rate of transport in the opposite direction due to diffusion.

0.125 L HCl solution, or 125 mL HCl solution  (Depending on the units requested)

Major steps:

1. Determine the chemical formulas for each compound

2. Write the unbalanced chemical equation, and balance it

3. Use dimensional analysis to determine the amount of acid needed.

Step 1. Determine the chemical formulas for each compound

hydrochloric acid is [tex]HCl[/tex].  This is from memorization of nomenclature, or consulting a resource.

Iron (iii) hydroxide is [tex]Fe(OH)_3[/tex] . This is from memorization of nomenclature, knowing that the charge on "hydroxide" is a negative 1, and that 3 hydroxide ions will be needed to balance the charge with a Iron (iii), or consulting a resource.

Step 2.  Write the unbalanced chemical equation, and balance it

For "neutralization reactions", an "Acid" and a "Base" will combine to form Water and a "salt".

Unbalanced chemical equation:

[tex]HCl + Fe(OH)_{3} \rightarrow H_{2}O+ FeCl_{3}[/tex]

Balance the equation by increase the number of "Chlorines" on the left, and the number of "hydroxides" (trapped in the 'water') on the right.

Balanced chemical equation:

[tex]3HCl + Fe(OH)_{3} \rightarrow 3H_{2}O+ FeCl_{3}[/tex]

Step 3. Use dimensional analysis to determine the amount of acid needed.

Knowing we have 25.0mL of Iron (iii) hydroxide solution (in milliliters), we first convert to Liters (since concentrations for "molarity" are measured in moles per Liter).

Then convert to convert to moles of Iron(iii) hydroxide using the solution's concentration.

Convert to moles of hydrochloric acid using the mole ratio from the balanced chemical equation.

Lastly convert to volume of the hydrochloric acid solution using that solution's concentration:

[tex]\dfrac{25.0 \text{ mL } Fe(OH)_3 \text{ solution}}{1} * \dfrac{1 \text{ L }}{1000 \text{ mL }} * \dfrac{0.25 \text{ mol } Fe(OH)_3 }{1 \text{ L } Fe(OH)_3 \text{ solution}} * \dfrac{3 \text{ mol } HCl }{1 \text{ mol } Fe(OH)_3 } * \dfrac{1 \text{ L } HCl \text{ solution} }{0.150 \text{ mol } HCl }=[/tex]

[tex]=0.125 \text{ L } HCl \text{ solution}[/tex]

If the requested answer should be measured in milliliters, one last conversion will yield the answer:

[tex]\dfrac{0.125 \text{ L } HCl \text{ solution}}{1} * \dfrac{1000 \text{ mL }}{1 \text{ L }} = 125 \text{ mL } HCl \text{ solution}[/tex]

Observe that the original measurements use 3 significant figures, so each answer should use 3 significant figures (both answers do).

The formula for heat capacity, which is Q = m x c x ΔT. Q represents the amount of heat absorbed, m is the mass of the object, c is the specific heat capacity, and ΔT is the change in temperature.

In this case, we know the mass of the wood is 1500.0 grams and the specific heat capacity is 1.8 g/JxC. We also know that the wood absorbed 67,500 Joules of heat. Finally, we know the final temperature of the wood is 57C. We can use this information to solve for the initial temperature.

First, we need to rearrange the formula to solve for ΔT. ΔT = Q / (m x c)
ΔT = 67,500 J / (1500.0 g x 1.8 g/JxC)
ΔT = 25°C

Next, we can use the final temperature and ΔT to solve for the initial temperature. The initial temperature can be found by subtracting the change in temperature from the final temperature.

Initial temperature = final temperature - ΔT
Initial temperature = 57°C - 25°C
Initial temperature = 32°C

Therefore, the initial temperature of the wood was 32°C.

In summary, heat capacity is a measure of an object's ability to absorb heat. Temperature is a measure of the average kinetic energy of the particles in an object. In this problem, we used the formula for heat capacity to solve for the initial temperature of a piece of wood. We found that the initial temperature was 32°C, given that the wood absorbed 67,500 Joules of heat and its final temperature was 57°C.

To know more about  heat capacity refer here

https://brainly.com/question/28921175#

#SP

The new boiling point of the solution is 100°C + 0.199°C = 100.199°C.

The boiling point of a solution is dependent on the concentration of solute particles in the solvent. This can be calculated using the formula

ΔTb = Kbm

where ΔTb is the boiling point elevation, Kb is the boiling point elevation constant, and m is the molality of the solution (moles of solute per kilogram of solvent).

The molar mass of CaS is 72.14 g/mol, so we can calculate the number of moles of CaS in the solution:

35 g / 72.14 g/mol = 0.4858 mol

The molality of the solution is then:

m = 0.4858 mol ÷ 1.25 kg

m = 0.3886 mol/kg

Next, we need to find the boiling point elevation constant Kb for water. Kb for water is 0.512 °C/m.

Finally, we can calculate the boiling point elevation:

ΔTb = Kb x m

ΔTb = 0.512 °C/m x 0.3886 mol/kg

ΔTb = 0.199 °C

To learn more about boiling follow the link:

brainly.com/question/2153588

#SPJ4

The freezing point depression (ΔTf) of a solvent is related to the molality of the solution by the equation:

ΔTf = Kf × molality

where Kf is the freezing point depression constant for the solvent.

For water, Kf is 1.86 °C/m.

(a) If the freezing point of the water solution is -9.3°C, then the freezing point depression is:

ΔTf = 0°C - (-9.3°C) = 9.3°C

Using the equation above and the value of Kf for water, we can solve for the molality of the solution:

9.3°C = 1.86 °C/m × molality

molality = 9.3°C / 1.86 °C/m = 5.00 m

Therefore, the molality of the water solution is 5.00 m.

(b) If the freezing point of the water solution is -27.9°C, then the freezing point depression is:

ΔTf = 0°C - (-27.9°C) = 27.9°C

Using the equation above and the value of Kf for water, we can solve for the molality of the solution:

27.9°C = 1.86 °C/m × molality

molality = 27.9°C / 1.86 °C/m = 15.0 m

Therefore, the molality of the water solution is 15.0 m.

To know more about depression refer here

https://brainly.com/question/28810167#

#SPJ11

The number of servings of cereal needed to consume 0.0350 moles of sugar is approximately 0.834 servings.

1. Calculate the molar mass of sucrose (C₁₂H₂₂O₁₁): (12x12) + (1x22) + (16x11) = 144 + 22 + 176 = 342 g/mol.

2. Convert grams of sugar per serving to moles: 11.0 g/serving * (1 mol/342 g) ≈ 0.0322 moles/serving.

3. Divide the desired moles of sugar by moles/serving: 0.0350 moles / 0.0322 moles/serving ≈ 0.834 servings.

So, to consume 0.0350 moles of sugar, you need to eat approximately 0.834 servings of this cereal.

To know more about molar mass click on below link:

https://brainly.com/question/22997914#

#SPJ11

The Earth is emitting the most longwave radiation at a wavelength of approximately 11.4 micrometers.

Longwave radiation emission, also known as infrared radiation, is the process by which the Earth releases heat into space. This radiation is absorbed by greenhouse gases in the atmosphere, which then trap the heat and prevent it from escaping back into space.

If the Earth had no atmosphere, this longwave radiation emission would be lost quickly to space, resulting in a much cooler planet.

To calculate the rate of radiation emitted (E) by the Earth at a temperature of 255 K, we can use the Stefan-Boltzmann Law, which states that E = σT⁴, where σ is the Stefan-Boltzmann constant (5.67 x 10⁻⁸ W/m²K⁴) and T is the temperature in Kelvin. Plugging in the values, we get:

E = 5.67 x 10⁻⁸ x (255)⁴
E = 3.8 x 10⁸ W/m²

This means that the Earth is emitting 3.8 x 10⁸ watts of longwave radiation per square meter at a temperature of 255 K.

The wavelength of maximum radiation emission can be determined using Wien's Law, which states that the wavelength of maximum emission (λmax) is equal to the constant of proportionality (b) divided by the temperature in Kelvin. The value of b is approximately equal to 2.898 x 10⁻³ mK.

Plugging in the values, we get:

λmax = b/T
λmax = 2.898 x 10⁻³ / 255
λmax = 1.14 x 10⁻⁵ meters

This means that the Earth is emitting the most longwave radiation at a wavelength of approximately 11.4 micrometers.

To know more about wavelength, visit:

https://brainly.com/question/31143857#

#SPJ11

The equation q = mHΔv is used to calculate the amount of heat required to vaporize a certain amount of substance. In this case, the substance is water and the latent heat of vaporization is 2260 kJ/kg.

The variable q represents the amount of heat required to vaporize the substance, which is measured in joules (J) or kilojoules (kJ). The variable m represents the mass of the substance being vaporized, which is measured in kilograms (kg). Finally, the variable HΔv represents the latent heat of vaporization, which is a property of the substance and is measured in joules per kilogram (J/kg).

When water is heated, it will begin to evaporate, or turn into a gas. This process requires energy in the form of heat. The amount of heat required to vaporize a certain amount of water can be calculated using the equation q = mHΔv. For example, if we want to vaporize 1 kg of water, we can calculate the amount of heat required by multiplying the mass by the latent heat of vaporization:

q = 1 kg x 2260 kJ/kg
q = 2260 kJ

Therefore, it would require 2260 kJ of heat to vaporize 1 kg of water.

In summary, the equation q = mHΔv is a useful tool for calculating the amount of heat required to vaporize a substance, such as water. The latent heat of vaporization is a property of the substance and is required in order to make these calculations.

To know more about vaporization refer here

https://brainly.com/question/14578189#

#SPJ11

The ratio between ethanol and energy in this reaction is 1 mole of C₂H5OH  which is 1367 kJ.

A mole ratio is  described as the ratio between the amounts in moles of any two compounds involved in a balanced chemical reaction.

The balanced chemical equation should be able to provide a comparison of the ratios of the molecules necessary to complete the reaction.

In the molar ratio method, a property of a solution is plotted against the molar ratio of the two reactants, the concentration of one being kept constant.

Learn more about mole ratio at:

https://brainly.com/question/30632038

#SPJ1

Answer:

Explanation:

its 1:-1367 you got it right but you need to put the - sign :)

A polyatomic ion is made of atoms that are covalently bonded together, which is true about polyatomic ions.

Covalent bonds form when electrons are shared between atoms. This contrasts with ionic bonds, where ions of opposite charges attract one another.

Polyatomic ions are covalently bonded molecules that contain an electrically charged atom or group of atoms. They can have either a positive or negative charge, and they are not usually found in their isolated form. Because they are charged, they have an impact on the chemistry of the surrounding substances.

An ion with more than one atom is called a polyatomic ion. There is one nitrogen atom and four hydrogen atoms in the ammonium ion. They all make up a single ion with the formula NH+4 and a charge of 1+. One carbon atom and three oxygen atoms make up the carbonate ion, which has a 2 overall charge.

Know more about polyatomic ion:

https://brainly.com/question/6689894

#SPJ11

The hydrolysis of one ATP molecule has ΔG = -30.5 kJ mol⁻¹. Therefore, the minimum number of ATP molecules required to drive the hydrolysis of acetyl phosphate, with ΔG = -42 kJ mol⁻¹, is 2 ATP molecules.

The phosphorylation of acetic acid involves the transfer of a phosphate group from ATP to acetic acid, forming acetyl phosphate and ADP. The reaction can be represented as follows:

The hydrolysis of acetyl phosphate involves the addition of a water molecule, which breaks the phosphoanhydride bond and releases the energy stored in the phosphate bond. The reaction can be represented as follows:

The ΔG value of the hydrolysis of acetyl phosphate is -42 kJ mol⁻¹. Since the phosphorylation of acetic acid requires one ATP molecule, the minimum number of ATP molecules required to drive the hydrolysis of acetyl phosphate is calculated as follows:

Since the hydrolysis of one ATP molecule has ΔG = -30.5 kJ mol⁻¹, the minimum number of ATP molecules required to drive the hydrolysis of acetyl phosphate is 2.

To learn more about hydrolysis of ATP, here

https://brainly.com/question/30457911

#SPJ4

The reaction of 42.7 L of chlorine gas at STP with 50.0 g of aluminum produces 150.5 g of aluminum chloride.

The balanced chemical equation for the reaction between aluminum and chlorine gas is:

2Al + 3Cl₂ -> 2AlCl₃

To use this equation to calculate the grams of aluminum chloride produced, we need to convert the given volume of chlorine gas to moles using the ideal gas law:

n = PV/RT

At STP, the pressure (P) and temperature (T) are 1 atm and 273 K, respectively. The volume (V) is given as 42.7 L. The gas constant (R) is 0.08206 L atm K⁻¹ mol⁻¹ Plugging these values in, we get:

n = (1 atm * 42.7 L) / (0.08206 L atm K⁻¹ mol⁻¹ * 273 K) = 1.694 mol

Since the stoichiometry of the balanced equation is 2:3 (2 moles of aluminum react with 3 moles of chlorine gas to produce 2 moles of aluminum chloride), we need to calculate how many moles of aluminum are needed to react with 1.694 moles of chlorine gas:

2 mol Al / 3 mol Cl₂ * 1.694 mol Cl₂ = 1.129 mol Al

Finally, we can use the molar mass of aluminum chloride (133.34 g/mol) to calculate the grams of product:

1.129 mol AlCl₃ * 133.34 g/mol = 150.5 g AlCl₃

Therefore, 150.5 g of aluminum chloride would be produced from 42.7 L of chlorine gas at STP reacting with 50.0 g of aluminum.

To know more about the aluminum chloride refer here :

https://brainly.com/question/29446640#

#SPJ11

Answer:

you equate the question 800×7.2 divide the answer by 735.And you'll get 7.84litre then covert to 0.0m³ if the question says so to get 0.00784

Galena and Pyrite are mineral ores.

Ore is a deposit of one or more precious minerals in the Earth's crust.

Galena is lead ore with formula PbS while pyrite is iron ore having formula FeS₂. In Other words, Galena is sulfide of lead and pyrite is sulfide of iron.

Both Galena and Pyrite are sulfide ores with different specific gravities.

Pyrite shows magnetic property on heating which galena is nonmagnetic component and doesn’t bear any magnetic properties.

Both are semi conductors but they are used for different purpose.

Learn more about Mineral ores, here:

https://brainly.com/question/89259

#SPJ1

The volume changes to 1.36 L, under the condition pressure of a balloon begins at 2. 45 atm and a volume 2. 00.

For this problem we have to apply  Boyle's law that states  at constant temperature, the pressure and volume of a gas are inversely proportional to each other.

Then, pressure increases, volume decreases and vice versa. The formula for Boyle's law is

P1V1 = P2V2

Here

P1 and V1 = initial pressure and volume

P2 and V2 = final pressure and volume

Applying this formula, we can evaluate the final volume of the balloon

P1V1 = P2V2

(2.45 atm)(2.00 L) = (3.60 atm)(V2)

V2 = (2.45 atm)(2.00 L) / (3.60 atm)

V2 = 1.36 L

To learn more about Boyle's law

https://brainly.com/question/1696010

#SPJ4

The specific heat capacity of iron is 0.449 J/g°C.

The quantity of heat energy needed to raise the temperature of one gram of a substance by one degree Celsius is the substance's specific heat capacity.

The specific heat capacity of iron can be calculated using the formula:

q = mcΔT

where q is the heat energy absorbed by the iron, m is the mass of the iron, c is the specific heat capacity of iron, and ΔT is the change in temperature of the iron.

Substituting the given values:

2056.5 J = (17.98 g) × c × (200°C - 25°C)

2056.5 J = (17.98 g) × c × (175°C)

Solving for c:

c = 0.449 J/g°C

To learn more about heat follow the link:

https://brainly.com/question/11297584

#SPJ4