2 C4H10+13 O2 = 8 CO2+10 H2O


identify the above chemical reaction type.

how many moles of water are produced when 43 grams of oxygen gas are reacted.

Answers

Answer 1

Answer:

This chemical reaction is a combustion.

n = 1.8mol

Explanation:

The ratio of oxygen to water is 13 to 10

The ratio of oxygen to water is also 43 grams to x

Cross multiply: 13x = 430 grams

Isolate x: x = 33.0769g

Remember that n = mass/Molar mass

The molar mass of water is 18.01528 g/mol

n = 33.0769/18.01528

n = 1.836048


Related Questions

What is the function of the conventional explosive in an atomic bomb?

Answers

Answer:

The gun-type assembly uses a conventional explosive to compress from one side, while the implosion assembly compresses from all sides simultaneously. The immediate energy release per atom is about 180 million electron volts (Me).

Explanation:

There are two 250 mL aq solutions. The first solution is potassium chromate and the second is silver nitrate. The masses of the solute in each of the solutions are the same. After the reaction was completed, the precipitate was found to have a mass of 167 g. Calculate the concentration of potassium ions in the original potassium chromate solution.

Answers

Answer:

Explanation:

There are two 250 mL aq solutions. The first solution is potassium chromate and the second is silver nitrate. The masses of the solute in each of the solutions are the same. After the reaction was completed, the precipitate was found to have a mass of 167 g. Calculate the concentration of potassium ions in the original potassium chromate solution.

K2CrO4  + AgNO3-----> Ag2CrO4 + KNO3

Ag2CrO4 HAS A MOLECULAR WEIGHT OF 2(108x2) + 52 + (4X16) =

216 + 52 + 64 =332

167gm/332= 0.51 moles which has 0.51 moles of CrO4 and required

2X0.51 moles K=1.02 moles of K

the original solution was 250 ml or 0.250L and had 1.02 moles/0.250L=

4.1 moles/L of K or 4.1 M of K

What do we mean when
we say a substance is
"pure"?

Answers

Answer:

a Pure substance contains of only one element or 1 compound

Explanation:

Substances such as Nitrogen, water, and oxygen,

are pure substances because they have a secure chemical composition throughout it's molecules. So basically they are substances or compounds with distinct chemical properties and a constant composition.

Hope this helps have a great night/day!

Sheila is on the track team and can run 500 yards in 40 seconds. How many meters can she run in 40 seconds?​

Answers

she can run 457.2 meters in 40 seconds

Calculate the volume of the cone

What is the volume of a cone with a height of 27 cm

and a radius of 13 cm? Round your answer to the

nearest tenth

27 cm

73 cm

Answers

Answer:

The answer is 4778.4 cm (cubed)

Explanation:

V = (πr(squared)) x (h/3)

V = (π x 13(squared)) x (27/3)

V = 530.9291585 x 9

V = 4778.4

what does Combustion do? (ez) (just for points)

Answers

Combustion is a chemical process in which a substance reacts rapidly with oxygen and gives off heat. The original substance is called the fuel, and the source of oxygen is called the oxidizer. The fuel can be a solid, liquid, or gas, although for airplane propulsion the fuel is usually a liquid. HoPe iT doSe WhaT EvEr U nEed IT foR hUmAn

which atom would be expected to have a half-filled 6p subshell?

Answers

Answer:

The Bismuth atom

Explanation:

it contains 83 atoms, 5 of which are valence electrons. These 5 electrons are accommodated in the 6s and 6p orbital.

2. The term for a reaction where two solutions are mixed and an insoluble substance forms is called a _____ reaction.

Answers

Answer:

precipitation reaction.

Explanation:

an insoluble substance is called a precipitate, so the reaction is a precipitation reaction.

Determine whether the reaction given below would be spontaneous or not. JUSTIFY your answer.
Pb2+ (aq) + Sn (s) → Sn2+ (aq) + Pb (s)
Thank you

Answers

Let's try to understand. Hope this picture can help you:D

The pressure of a 12ml sample of gas is 1atm at 400K. The temperature is increased the new pressure is 1.5atm. What is the new temperature if volume is constant?

Answers

Answer:

600K

Explanation:

P1/T1 = P2/T2

T2 = P2T1/P1

T2 = (1.5atm)(400K)/1atm

T2 = 600K

if matter is made of many tiny particles, why does it seem to be continuous? Why doesn’t water seem to behave like sand?

Answers

Answer:

Explanation:

if matter is made of many tiny particles, why does it seem to be continuous? Why doesn’t water seem to behave like sand?

Water and some other molecules exhibit a property know as hydrogen bonding.  A hydrogen atom in one molecule of water is attracted to the oxygen in a neighboring molecules of water.'

The force of this attraction is less than a standard chemical attractive force, but it is real and measurable.

When billions and trillions of water molecules are held together by this force, the small amount of molecule to molecule force is added up to a tremendous force.  That is why even though sulfur is below oxygen on the periodic table, hydrogen sulfide is a gas while hydrogen oxide is a liquid at room temperature.

Hydrogen bonding explains the unique properties of ice, liquid water and steam,We all know water exists in several forms such as solid, liquid and ice. Water boils at 100  C and freezes at 32  F, right? Am I correct? Let us look at some of the chemistry behind forms of water.  

The strong polar bond between water molecules creates water cohesion.

As they are cooled, aggregates of most other substances increase monotonically in density becoming progressively heavier -- the colder they are, the more tightly packed their molecules become. But water possesses a peculiar physical feature: ice expands, so it is lighter than liquid water (i. e., ice floats). When water trapped in rock crevices freezes, it breaks rocks (and pipes).

 

Water is vital to all known life forms, that is, all those on planet Earth. It is so integral to life as we know it that many biologists cannot even envision life without water (although that might be possible). Indeed, the physical properties of water dictate critical thermal limits for living systems.

In one sci-fi story, an alien refers to humans as "ugly bags of mostly water" -- our bodies are about 60-70% water, depending upon how dehydrated we are at any given time. Humans use massive amounts of freshwater to drink, cook, bathe, flush toilets, do laundry, fill swimming pools, irrigate yards and gardens, run flowing fountains, and for recreation. Precious clean water is often wasted, such as when people leave tap water running while washing their hands or brushing their teeth. The personal water consumption of an average American is about 200 gallons per day, but when industrial and energy usage is added in, per capita freshwater usage is more than 2000 gallons/day. People in third world countries use much less water, of course.

Most freshwater is claimed or "owned" and there is not enough to go around. Approximately half of the world's population of people do not even have adequate access to clean drinking water. One of the major symptoms of the human overpopulation crisis is shortages of available fresh water. Wars will be fought over water.

Hydrogen bonding is a property of water and some other molecules. A hydrogen atom in one water molecule is attracted to an oxygen atom in another water molecule.

What is a matter?

Matter is a substance composed of various particle types that occupies physical space and has inertia.

According to modern physics principles, each type of particle has a distinct mass and size. The electron, proton, and neutron are the most well-known examples of material particles.

Atoms and molecules are tiny particles that make up solids, liquids, and gases.

This attraction has a lower force than a standard chemical attractive force, but it is real and measurable.

When this force holds billions and trillions of water molecules together, the small amount of molecule to molecule force adds up to a tremendous force.

Thus, due to these bonds, the water does not seem to behave like sand.

For more details regarding matter, visit:

https://brainly.com/question/4513444

#SPJ6

If the half-life of a reaction is 6 days. What percentage of material is left after 18 days?
Show your work

Answers

Answer:

12.5% is left

Explanation:If the half-life of a reaction is 6 days. What percentage of material is left after 18 days?

18 days/6 days = 3 half lives

each half life you lose half the material

in 3 half lives you have (1/2)x (1/2) x (1/2) =1/8

1/8 =0.125 so 12.5% is left

A boy is being pushed on a swing. His older sister with a greater mass sits on the swing next. Which statement describes the change in motion if his sister is pushed with the same force?

Answers

Answer:

yes he forced up then avoid it

If the same force is exerted and she weighs more, her acceleration would be lesser than the brothers because a heavier object takes more time to accelerate when the same force is exerted.

what is the name of the high-energy compound that cells use to fuel chemical reactions?

Answers

Adenosine triphosphate, or ATP, is the primary carrier of energy in cells.

a container filled with an ideal gas is connected to a reservoir of the same gas so that the number of moles in the container can change. if the pressure and volume of the container are each doubled while the temperature is held constant, what is the ratio of the final to the initial number of moles in the container?

Answers

Considering the ideal gas law, the ratio of the final to the initial number of moles in the container is 4.

An ideal gas is a theoretical gas that is considered to be composed of point particles that move randomly and do not interact with each other. Gases in general are ideal when they are at high temperatures and low pressures.

An ideal gas is characterized by three state variables: absolute pressure (P), volume (V), and absolute temperature (T). The relationship between them constitutes the ideal gas law, an equation that relates the three variables if the amount of substance, number of moles n, remains constant and where R is the molar constant of the gases:

P× V = n× R× T

Then ,the number of moles can be expressed as:

[tex]n=\frac{PxV}{RxT}[/tex]

In this case, a container filled with an ideal gas is connected to a reservoir of the same gas so that the number of moles in the container can change. You want to know the ratio of the final to the initial number of moles in the container, this is, [tex]\frac{n_{final} }{n_{initial} }[/tex].

The number of moles [tex]n_{initial}[/tex] can be expressed as:

[tex]n_{initial} =\frac{P_{initial} xV_{initial} }{RxT_{inital} }[/tex]

and the number of moles [tex]n_{final}[/tex] can be expressed as:

[tex]n_{final} =\frac{P_{final} xV_{final} }{RxT_{final} }[/tex]

Then:

[tex]\frac{n_{final} }{n_{initial} } =\frac{\frac{P_{final} xV_{final} }{RxT_{final} }}{\frac{P_{initial} xV_{initial} }{RxT_{initial} }}[/tex]

Being R is a constant number:

[tex]\frac{n_{final} }{n_{initial} } =\frac{P_{final} xV_{final} }{T_{final} }x\frac{T_{initial} }{P_{initial} xV_{initial} }[/tex]

The pressure and volume of the container are each doubled while the temperature is held constant, then you know:

[tex]P_{final} =2xP_{initial}[/tex][tex]V_{final} =2xV_{initial}[/tex][tex]T_{final} =T_{initial}[/tex]

Replacing in the the ratio of the final to the initial number of moles:

[tex]\frac{n_{final} }{n_{initial} } =\frac{2xP_{initial} x2xV_{initial} }{T_{initial} }x\frac{T_{initial} }{P_{initial} xV_{initial} }[/tex]

[tex]\frac{n_{final} }{n_{initial} } =\frac{4xP_{initial} xV_{initial} }{T_{initial} }x\frac{T_{initial} }{P_{initial} xV_{initial} }[/tex]

[tex]\frac{n_{final} }{n_{initial} } =4}[/tex]

Finally, the ratio of the final to the initial number of moles in the container is 4.

Learn more:

https://brainly.com/question/4147359?referrer=searchResults

where do the bulk of the wine industry’s corks come from?

Answers

Answer: Cork grows naturally in only two areas of the world: the Mediterranean region of Europe – particularly the Iberian Peninsula, where Portugal and Spain produce more than 80% of the world's cork – and Northwest Africa.

Explanation:

Question 14 (4 points)
Write the word equation for the following reaction.
Na3P
+
CaF2
NaF + Ca3P2
What’s the word equation

Answers

Answer:

Sodium Phosphide + Fluorite --------- Sodium Fluoride + Calcium Phosphide

SOMEONE PLZZ help me on this chemistry test I need to pass it to be able to get my grade up :(((

Answers

Answer:

s-2 p-6 d-10 f-14

Explanation:

s orbital max can fit 2 electrons

p orbital max can fit 6 electrons

d orbital max can fit 10 electrons

f orbital max can fit 14 electrons

Explain what is wrong with the following Lewis Dot diagram?

Answers

Answer:

you need to move one of the dots from Ca to the one at Cl like the arrows show

Explanation:

can you guys help me with this one too

Answers

The tractor would have the most kinetic energy :D

how do chemicals in a plant relate to bath bombs?

Answers

When a bath bomb comes in contact with water, the baking soda and citric acid react to make carbon dioxide bubbles. This is an acid–base reaction, where baking soda (also called sodium bicarbonate) is a weak base and citric acid is a weak acid.

what happens to the electron cloud at very high atomic number, when the innermost electron would, using a non-relativistic model, be calculated to exceed the speed of light​

Answers

I can only tell you that when a atomic level is hig it as more electro around the electron cloud and it means that it is harder to be unstable

If a student finds the weight of the sodium chloride to be 28.5g
Calculate the number of particles.
( Na=23, C1= 35.5)

Answers

The number of particles in 28.5 g of sodium chloride, NaCl is 2.93×10²³ particles

From Avogadro's hypothesis,

1 mole of NaCl = 6.02×10²³ particles

But,

1 mole of NaCl = 23 + 35.5 = 58.5 g

Thus, we can say that:

58.5 g of NaCl = 6.02×10²³ particles

With the above information, can obtain their number of particles in 28.5 g of NaCl. This can be obtained as illustrated below:

58.5 g of NaCl = 6.02×10²³ particles

Therefore,

28.5 g of NaCl =

[tex] \frac{28.5 \times 6.02 \times {10}^{23} }{58.5} [/tex]

28.5 g of NaCl = 2.93×10²³ particles

Thus, the number of particles in 28.5 g of sodium chloride, NaCl is 2.93×10²³ particles

Learn more: https://brainly.com/question/15166623

The element phosporus is located to the right of the element magnesium along the same period in the periodic table.

Which best describes the relationship of the elements?

1.Magnesium has a larger atomic number.
2.Phosphorus has a larger atomic mass.
3.Magnesium is in the same category as phosphorus.
4.Phosphorus has similar chemical properties as magnesium.

Answers

Answer:

The element phosporus is located to the right of the element magnesium along the same period in the periodic table. Which best describes the relationship of the elements? Magnesium has a larger atomic number.

2. Which of the following statements suits the description about covalent compound?
A. It always involves metal and non-metal elements.
B. It occurs when there is a sharing of electrons between elements.
C. It is formed by the complete transfer of electrons between elements.
D. All are TRUE to a covalent compound.

Answers

Answer:

B

Explanation:

Covalent bonding involves the sharing of electrons between two non-metal elements

Which is not true? Question 1 options: Cold currents cause nearby coastlines to be colder. Warm currents cause nearby coastlines to be warmer. Oceans move more slowly than wind. Oceans hold more heat than atmosphere on land. Currents are made by wind blowing over the water.

Answers

Answer:

Currents are made by wind blowing over the water.

Explanation:

Currents created by wind are formed through the use of warm and cold air. The warm air becomes lighter through expansion, causing it to rise and transform into a warm air current. Cool air is heavier than the warm air, which makes it move to replace the warm air, thus forming a cool air current.

In short, currents are not made by wind blowing over water, but by the characteristics of warm and cool air acting on one another.

Additionally, the rest of the answers can easily be proven true.

Cold currents do cause nearby coastlines to become colder. This is because these winds blow into the coast and affect the temperature. The process also applies to warm air. Warm air can blow into the coastline and warm the area. (With this, both "Cold currents cause nearby coastlines to be colder," and "Warm currents cause nearby coastlines to be warmer," have been shown to be truthful.)

Oceans more more slowly than wind is also correct. The ocean is an uninterrupted surface which winds can peacefully blow across. This lack of disruption causes the winds to move quickly - much faster than even the ocean itself. The ocean('s) currents move slower than the winds. (Therefore, "Oceans move more slowly than wind," had been proven true.)

Oceans hold more heat than atmosphere on land has a simple explanation: the Sun. As we know, this humongous, fiery star we depend on for survival spreads its sunlight all over Earth. The oceans are no exception. The ocean(s) absorb(s) this sunlight and transform(s) it to heat and energy. Since water has a higher capacity for heat compared to air, it can store larger amounts of heat with less of a change in temperature (than air). (For that reason, "Oceans hold more heat than atmosphere on land," is indeed a factual statement.)

All of the options, apart from Currents are made by wind blowing over the water, have been proven true. With that being said, our answer is clear. (Hope this helps - have a lovely week!)

Answer:

currents are made by wind blowing over the water

Explanation:

In which direction does weather typically move? a. from east to west c. from north to south b. from west to east d. from south to north *this is the next question on the test and the answer is FROM WEST TO EAST*

Which of these describe a warm front?

Warm and cool air mass that are not strong enough to move one another

Cold air meets warm air, fast moving and stormy. Severe weather is likely.

Warm air meets cold air. Slow moving with less severe weather.

Ocean surface temperature is greater than 80F.

*these are the third question answers and there are no brainly answers online, so the answer to this one is, WARM AIR MEETS COLD AIR. SLOW MOVING WITH LESS SEVERE WEATHER.*

hope this helps :)

The chemicals that are present before a reaction occurs are called _____, and the chemicals produced from the reaction are called _____.

Answers

Answer: Reactants-Products

what is the first step in nucleophilic addition under acidic conditions?

Answers

Answer:

A nucleophile view the full answer Question 3 (1 point) What is the first step in nucleophilic addition under acidic conditions? Protonation of the nucleophile Addition of the nucleophile Loss of water Protonation of the carbonyl

Explanation:

Answer:

the first step, which is rate-determining, an electrophilic reagent adds to the pi bond. In the second step a nucleophilic reagent adds to the electron deficient intermediate that was formed in the first step.

Explanation:

A part of our body that protect the heart and lungs​

Answers

A part of our body that protect the heart and lungs is known as The rib cage

What is the oxidation state of gold in AuO2?

Answers

It’s number b off brainly
Other Questions
3. Ian important phone call from America. Could you tell me when it comes?A. had expectedB. have been expectedC. expectedD. am expecting 9(8d 5) + 13 = 12d 2 The sales tax rate in a certain city is 8%. Find the tax charged on a purchase of $600, and the total cost. guys i really need help w this and its due in like 3 hours. i am panicking and none of my friends are helping at all PLS HELP GUYS i am so close to passing this assignment How many 5 digit flippy numbers are divisible by 15. PLEASE HELPPP!!!!Identify a biome and explain how the biotic and abiotic factors affect the biodiversity in that Biome? How are the biotic and abiotic factors related? Please answer??????!!!!! how to be smart like beetleguese Select the two pairs of figures that are similar. Which of the following correctly lists animals in order of increasing complexity? A. Diploblast, triploblast with complete coelom, triploblast with incomplete coelom. B. Triploblast with coelom, triploblast with no coelom, diploblast with coelom. C. Diploblast, triploblast with incomplete coelom, triploblast with complete coelom. D. Diploblast with coelom, triploblast, triploblast with coelom. Need help with this question Prove that (I ,+) is an abelian groupwhere I = Set of integers I need help with this very hard question that i do not understand at this moment and it is difficult for me to answer Find the percentage of change. In 2016, 136.75 million votes were cast for the presidential election. In 2020 151.8 million votes have been counted . Whats the percentage of change ? which of the following are right triangles: a triangle with side lenghts 6 inches, 8 inches,10 inches, a triangle with side lengths 8, 15, 17, a triangle with side lengths 5, 12, 13, a triangle with side lenght 4, 5, 6 What is the major theme of the work that transcends the setting and the time period? how can you tell? what is the moral of the story? PLZ PLZ ANSWER These questions please!!question 1: Under the Articles of Confederation, which power did the government lack?settling disputes between statesdeclaring warregulating commercenegotiating with foreign countriesQuestion 2: Which idea came from the Mayflower Compact?right to a trial by juryself-governmentfreedom to carry armsfreedom from unlawful searches French and Indian war: how did the event impact the colonies? spanish word scrambleplease help On line t, y increases as x decreases.What type of slope does line t have?