Answer: C
Combustion
Explanation:
Oxygen support combustion in a chemical reaction. Oxygen support burning.
In the absence of oxygen, combustion reaction can never take place. And when the supply of oxygen is being cut off, combustion reaction will automatically stop.
The correct option is C which is combustion
A wooden object (conically shaped) has a diameter of 8cm and height of 14cm. It floats in oil with 6cm of its height above oil level. Determine (a)The density of the object (b) If the volume of oil is twice that of the object, what fraction of oil is displaced after immersing the object?
Answer:
(a) The density of the object is 316/343 × the density of the oil
(b) The fraction of oil displaced after immersing the object is 0.461 of the oil volume
Explanation:
(a) The volume, V of a cone of height, h and base diameter, D = 2×r is given by the following equation;
[tex]V = \dfrac{\pi r^{2} h}{3}[/tex]
The volume of the object is therefore;
[tex]\dfrac{\pi \times 4^{2} \times 14}{3} = 74\tfrac{2}{3}\pi \, cm^3[/tex]
Where 6 cm is above the oil level we have;
[tex]\dfrac{\pi \times \left (6 \times \dfrac{4}{14} \right )^{2} \times 6}{3} = 5\tfrac{43}{49}\pi \, cm^3[/tex] above the oil level
Therefore, volume of the oil displaced = [tex]68\tfrac{116}{147}\pi[/tex] cm³ = 216.11 cm³
The density of the object is thus;
[tex]\dfrac{68\tfrac{116}{147}\pi}{ 74\tfrac{2}{3}\pi} \times Density \ of \ the \ oil = \dfrac{316}{343} \right ) \times Density \ of \ the \ oil[/tex]
The density of the object = 316/343 × the density of the oil.
(b) The volume of the oil = 2 × Volume of the object = [tex]2 \times 74\tfrac{2}{3}\pi \, cm^3 = 149\tfrac{1}{3}\pi \, cm^3[/tex]
The fraction of the volume displaced, x, after immersing the object is given as follows;
[tex]x = \dfrac{68\tfrac{116}{147}\pi}{ 149\tfrac{1}{3}\pi} = \dfrac{158}{343} = 0.461[/tex]
The fraction of oil displaced after immersing the object = 0.461 of the volume of the oil
A man of mass 60kg climbs up a 20m long staircase to the top of building 10m high. What is the work done by him
Answer:
mass=60kg
h=20m
g=10m/s²
here the work done by the body is equal to its potential energy
work done=P.E.
As we know that P.E.=mgh
putting values
P.E.=60kg×20m×10m/s²
P.E.=1200kgm×10m/s²
P.E.=12000Nm
so the work done by the body is 12000Nm
can someone help m e
Answer:
A.when the distance is very close from the source
Explanation:
Answerwhen the distance is very close from the source
Explanation: A
Match the type of metamorphism to its best definition.
Impact
metamorphism
?
The process in which a
rock changes as a result
of heat generated from
magma.
Dynamic
metamorphism
?
The process in which a
rock changes due to
pressure directed on it.
Contact
metamorphism
?
The process in which a
rock changes because of
extreme heat and pressure
caused by a meteorite
collision with Earth.
Regional
metamorphism
?
The process in which
buried rocks in a large
area are changed by heat,
pressure, and fluids.
Answer:
See Explanation.
Explanation:
Impact metamorphism:
The process in which a rock changes because of extreme heat and pressure caused by a meteorite collision with Earth.
Regional metamorphism:
The process in which buried rocks in a large area are changed by heat, pressure, and fluids.
Contact metamorphism:
The process in which a rock changes as a result
of heat generated from magma.
Dynamic metamorphism :
The process in which a rock changes due to
pressure directed on it.
The typing of metamorphism to its best definition should be explained below.
Matching with the best definition:
Impact metamorphism: The process where a rock changes due to extreme heat and pressure caused by a meteorite collision with Earth.
Regional metamorphism: The process where it should be buried rocks in a large area that should be changed by heat, pressure, and fluids.
Contact metamorphism: The process where a rock changes as a result
of heat generated from magma.
Dynamic metamorphism : The process where a rock changes due to
pressure directed on it.
Learn more about pressure here: https://brainly.com/question/20772787
Calculate the wavelength of an electron mass 9.1*10^-31kg moving with a velocity of 2.0*10^6m/s (h=6.63*10^-34Js) (Hint: De Broglie's wavelength)
Answer:
Wavelength, [tex]\lambda=3.64\times 10^{-10}\ m[/tex]
Explanation:
We have,
Velocity an electron is [tex]2\times 10^6\ m/s[/tex]
Mass of an electron is [tex]9.1\times 10^{-31}\ kg[/tex]
It is required to find the wavelength of electron. The De-Broglie wavelength of an electron is given by :
[tex]\lambda=\dfrac{h}{mv}[/tex]
h is Planck's constant
[tex]\lambda=\dfrac{6.63\times 10^{-34}}{9.1\times 10^{-31}\times 2\times 10^6}\\\\\lambda=3.64\times 10^{-10}\ m[/tex]
So, the wavelength of an electron is [tex]3.64\times 10^{-10}\ m[/tex].
A student dips a strip of metal into a liquid. Which is evidence that only a physical change has occurred?
Answer:
not sure if this is correct but it is what i know
The metal bends more easily. The metal changes color. The metal gives off light. The metal gives off heat.
Explanation:
Two bumper cars collide and then move away from each other. The forces exerted are:
A. Equal and opposite
B. Opposite
C. Equal
Answer:
the answer is b
Explanation:
if it was equal they would move away from each other
What is needed to change a solid to a gas ?
Answer:
add energy
Explanation:
bc adding heat is energy which can make water turn into gas.
If you have two waves, one with a frequency of 4.4 x 1010 Hz and one with a frequency of 3.6 x 1014 Hz, which has the highest energy? Justify your answer
with evidence from the lesson and/or mathematically.
Answer: frequency of 3.6 x 10^14 Hz
Explanation:
If someone have two waves, one with a frequency of 4.4 x 1010 Hz and one with a frequency of 3.6 x 1014 Hz, the one with higher frequency ( 3.6 × 10^14) will have the higher energy.
From electromagnetic spectrum,
E = hf
Where
E = energy
F = frequency
h = Planck constant
The one with higher frequency will have the higher energy since energy is directly proportional to the frequency.
The one with higher frequency ( 3.6 × 10^14) will have the highest energy.
What is the frequency?Frequency is the number of oscillations per second in the sinusoidal wave.
If someone have two waves, one with a frequency of 4.4 x 10¹⁰ Hz and one with a frequency of 3.6 x 10¹⁴ Hz.
From electromagnetic spectrum, energy associated with the frequency is
E = hf
Where, E = energy, f = frequency and h = Planck constant
The Planck's constant is the constant value. The energy is directly proportional to the frequency.
Thus, The one with higher frequency will have the higher energy since energy is directly proportional to the frequency.
Learn more about frequency.
https://brainly.com/question/25867078
#SPJ5
What is the momentum of a man of mass 10kg when he walks with a uniform velocity of 2m/s.
(point stealers will be reported so pls dont do it)
Answer:
[tex]Momentum(p) = 20kgm/s[/tex]
Explanation:
Given
Mass = 10kg
Velocity = 2m/s
Required
Calculate the momentum of the man
Momentum is calculated as thus
[tex]Momentum(p) = Mass(m) * Velocity(v)[/tex]
or
[tex]p = mv[/tex]
So; to solve this question; we simply substitute 10kg for mass and 2m/s for velocity in the above formula;
The formula becomes
[tex]Momentum(p) = 10kg * 2m/s[/tex]
[tex]Momentum(p) = 10 * 2 * kg * m/s[/tex]
[tex]Momentum(p) = 20kgm/s[/tex]
Hence, the momentum of the man is [tex]20kgm/s[/tex]
WHAT IS CHANGE OF STATE
Answer:
a change from one state (solid or liquid or gas) to another without a change in chemical composition
Explanation:
Explanation:
From Solid to. Liquid to Gas A change of state is the change of a substance from one physical form to another. All changes of state are physical changes. The particles have different amounts of energy when the substance is in different states.
Liam is two-years old. His mother is concerned about his behavior. Liam is very different from how his sister Briana was when she was his age. He does not make eye contact. When she smiles at him, he doesn’t smile back. He doesn’t seem to like her hugging or kissing him. It seems that Liam has
Answer:
Autism
Explanation:
Those are some symptoms of autism that you described
Answer:
Autism is the answer
What is the photoelectric effect?
A the absorption of particles by a metal surface that is exposed to red light or infrared rays
B the proportional relationship between a photon's energy and the frequency of light.
C the emission of electrons from a metal caused by light striking the metal
D the ability of specialized photons to bounce off a metal surface.
Answer: C
the emission of electrons from a metal caused by light striking the metal
Explanation:
Photo means anything related to light in Physics and science generally.
Photoelectric effect explains the effect of light incident on metal surfaces by knocking out electrons on the metal surfaces.
The correct option is C
the emission of electrons from a metal caused by light striking the metal
Someone please help me with this
1. A guitar string vibrates with a frequency of 100 Hz and it has a wavelength of 3 cm. Determine the speed of the wave that goes through that guitar string.
2. The speed of sound waves in air is around 340 m/s. Suppose that you hear a dog growl, and the frequency of the growl is 70 Hz. Determine the wavelength of the growl sound waves.
3. You are in a boat on the ocean. Some waves come by and you feel your boat move up and down. You whip out a stopwatch and find that you go up-and-down once every 5 seconds. So, the period of the wave is 5 s. You are watching the waves as you go up-and-down, and you see that the wave crests are 15 meters apart. So, the wavelength is 15 m. Use this information to calculate the speed of the waves.
4. Explain why these two waves have the same speed, even though some of their wave properties are different.
Wave A has a frequency of 3 Hz and a wavelength of 5 m
Wave B has a frequency of 6 Hz and a wavelength of 2.5 m
Answer: I think 1 is 300 metres per second.
Explanation: wave speed= wave length x wave frequency
wave speed = 3 x 100
wave speed is 300 m/s
I WILL CHOOSE YOU AS BRAINLIEST
Use scientific evidence to outline how the Big bang theory can be used to explain the origin of the universe and its age.
Answer:
The widely accepted theory for the origin and evolution of the universe is the Big Bang model, which states that the universe began as an incredibly hot, dense point roughly 13.7 billion years ago.
The way a rock reflects light is called the rock's
A. streak
O B. luster
O C. cleavage
D. specific gravity
The way a rock reflects light is called the luster of the rock. Hence option B is the correct answer.
What is Reflection?When light rays bounce off one surface, transition from one transparent medium to the next, or proceed through a media whose structure is constantly shifting, they change direction.
According to the law of reflection, the angle of the reflected ray when reflecting from a level surface is the same as the angle of the ray. (By practice, all angles in wave propagation are expressed with regards to the normal to the surface, or to the line that is perpendicular to it.
The light beam and the surface normally establish a plane in which the reflected beam is always located. The pictures created by straight and curved mirrors can be understood using the
To know more about Reflection:
https://brainly.com/question/15487308
#SPJ2
What area specializes in the identification and examination of skeletal remains?
What was Neptune's distance from the Sun in 1989?
Answer:
4.5 Billion km :)
Explanation:
thats how it is
Answer:
About 3.8 billions miles from the Sun OR 4.82 kilometers
hope this helped!
What other types of energy are present when turning a generator that were not mention in question ? Explain where in the process they are present . ( Types of energy : Heat , light , sound , radiant , chemical
PLEASE HELP!!
Answer:
When an object is in motion, there is energy associated with that object. Why should that be the case? Moving objects are capable of causing a change, or, put differently, of doing work. For example, think of a wrecking ball. Even a slow-moving wrecking ball can do a lot of damage to another object, such as an empty house. However, a wrecking ball that is not moving does not do any work
(hope it helps :p )
Which best describes Earth’s magnetic field lines? The field lines go out of Earth near the South Pole, enter Earth in the North Pole, and are aligned with the geographic poles. The field lines go out of Earth near the South Pole, enter Earth in the North Pole, and are not aligned with the geographic poles. The field lines go out of Earth near the North Pole, enter Earth in the South Pole, and are aligned with the geographic poles. The field lines go out of Earth near the North Pole, enter Earth in the South Pole, and are not aligned with the geographic poles.
Answer:
b
Explanation:
did the quiz
Answer:
(B) The field lines go out of Earth near the South Pole, enter Earth in the North Pole, and are not aligned with the geographic poles.
Explanation:
Please Help! When drawing free-body diagrams, does the label "centripetal force" get used? Explain why.
Explanation:
No. Centripetal force is a not a force itself, but rather a sum of forces. From Newton's second law:
∑F = ma
∑F = m v²/r
So centripetal force does not get used on a free body diagram.
When waves travel through water, why do the moving water particles continue to return to their starting position?
OA.
Waves transfer matter, but not energy.
Waves transfer both matter and energy.
OC.
Waves transfer energy, but not matter.
OD.
Waves don't transfer matter or energy.
Answer:
Waves transfer energy, not matter
Explanation:
:What will be the value of the refractive index of the medium? Critical angle of that medium is 30 degree
a) 2
b) 1.5
c) 1.8
d) 1
Answer:
Let the second medium be air (n₁=1)
The refractive index n₂ of the medium where first medium is air is found (a)
(a) n₂ = 2
Explanation:
Critical angle can be defined as the angle of incidence that provides the angle of refraction of 90°.
Refractive index of a medium can be defined as a number that describes that how fast a light will travel through that medium.
Critical angle and Refractive index are related by:
[tex]\theta_{critical}= sin^{-1}(\frac{n_1}{n_2})[/tex]
[tex]sin \theta_{critical}=\frac{n_1}{n_2}[/tex]
To find refractive index of medium with respect to air, substitute n₁=1 (Refractive index of air is 1)
Also θ(critical)=30°
Find n₂ :
[tex]sin30= \frac{1}{n_2}\\0.5=\frac{1}{n_2}\\n_2=\frac{1}{0.5}\\n_2=2[/tex]
A spherical mirror and a thin spherical lens have each a focal length of +10cm , the mirror and the lens are likely to be
Answer: Concave mirror and convex lens
Explanation: A spherical mirror and a thin spherical lens have each a focal length of +10cm, this means that distance of any object from the mirror is +10 metres.
While for the lens, the distance of any object to the other side of the lens is +10 metres. Therefore, the mirror is concave mirror and the lens is a convex lens.
describe what factors can make it difficult to reintroduce captive animals into their natural habitats.
Answer:
Captive animals are animals that are maintained by people in an enclosed place not allowing them to be free. There are several factors that make it difficult to reintroduce them to their natural habitats like:
-Captive animals don't learn the necessary skills to survive in their natural habitats like hunting skills.
-They are too used to have contact with people which makes them vulnerable to hunters.
-Sometimes these animals are not able to integrate with a wild population.
-It has been found that some captive animals are more susceptible to diseases.
7. How does friction affect the kinetic energy of an object?
Answer:
Friction is a resistive force to motion. When two bodies move against each other some of the kinetic energy is converted to heat energy due to friction. This reduces the total kinetic energy in the system. ... Mechanical energy is reduced due to friction and converted to heat.
Explanation:
Kinetic friction does oppose the relative motion of two surfaces. If the one of these surfaces is stationary, then it will tend to slow down the moving object.
Liquefication occurs when
Answer: Liquefaction occurs when the structure of a loose, saturated sand breaks down due to some rapidly applied loading.
As the structure breaks down, the loosely-packed individual soil particles attempt to move into a denser configuration. Liquefaction most often occurs when three conditions are met:
loose, granular sediment or fill
saturation by groundwater
strong shaking
Answer:
heat is applied
Explanation:with metal and ice
What happens to sound waves after they are received by our ears?
Answer:
Our ears perceive then sound then it is transmitted to our brain where it is processed into something we can respond to. This all happens in less than a second and we are unaware that we are doing it.
Explanation:
The sound wave bounces off of the ear drum into the inner ear.
Answer:
Sound waves travel from the outer ear and in through the auditory canal, causing the eardrum to vibrate. This in turn causes three small bones in the middle ear to move. The vibrations move through the fluid in the cochlea in the inner ear, stimulating thousands of tiny hair cells.
Electric circuit questions,,, plz help me
A helicopter travels west at 80 mph. It is moving above a car traveling on a highway at 80 mph. Given this information, you can determine that the helicopter and car are traveling ____.
Select one:
a. in the same direction
b. in different directions
c. at the same speed
d. at the same velocity
Answer:
d. at the same velocity
Explanation:
I will assume the car is also travelling westward because it was stated that the helicopter was moving above the car. In that case, it depends where the observer is. If the observer is in the car, the helicopter would look like it is standing still ( because both objects have the same velocity). If the observer is on the side of the road, both objects would be travelling at the same velocity. Also recall that, velocity is a vector quantity; it is direction-aware. Velocity is the rate at which the position changes but speed is the rate at which object covers distance and it is not direction wise. Hence velocity is the best option.
Answer:
C. At the same speed
Explanation:
I just took the exam and got the answer correct
