You put a force of 550

n in an area of 9 cm² on the tops of my feet! the pressure on

my feet was 611111 pa. what is the ratio of this pressure to

atmospheric pressure?

Answer:

The amount of gravitational force INCREASES as the distance between two objects increases; thus, an astronauts weight DECREASES as she or he moves away from earth into space.

hope this helped.

Heat transfer that occurs in the situations that follow. If heat transfer is not responsible for the situation that is  conduction

Option A is correct.

Conduction is the cycle by which heat energy is communicated through impacts between adjoining particles or atoms. In contrast to gases, where the distance between the particles is greater, solids and liquids have a higher rate of conduction.

Conduction is the interaction by which intensity is moved from the more sizzling finish to the colder finish of an item. Heat spontaneously flows along a temperature gradient, and the object's thermal conductivity, or k, is its capacity to conduct heat.

Learn more about heat conduction :

brainly.com/question/30416117

#SPJ4

Stored elastic potential energy can be utilized in everyday objects such as springs and rubber bands, allowing for the transfer of energy through the conversion of potential energy into kinetic energy.

One common example of stored elastic potential energy being utilized is a compressed spring. When a spring is compressed, work is done on it to store potential energy, which can then be released to do work on other objects. For instance, a spring-loaded toy car will store potential energy in its compressed spring, which is then released when the car is let go, causing it to move forward. This energy transfer is from the spring to the car's kinetic energy.

Another example of stored elastic potential energy is a stretched rubber band. When a rubber band is stretched, energy is stored in its molecular bonds, which can be released when the band is allowed to snap back into its original shape. This potential energy can be utilized in everyday life, for example, in a slingshot. When the rubber band is stretched back in a slingshot, it stores potential energy, which is then released when the projectile is released, converting potential energy into kinetic energy. This energy transfer is from the rubber band to the projectile's kinetic energy.

In both cases, the transfer of energy occurs through the conversion of potential energy into kinetic energy, allowing for work to be done on another object. These examples show how the principle of stored elastic potential energy can be utilized in everyday objects, making them more efficient and useful.

To learn more about potential energy

https://brainly.com/question/24284560

#SPJ4

The initial speed of the ball is approximately 22.0 m/s.

We can solve this problem using the kinematic equations of motion.

The initial velocity of the ball can be broken down into horizontal and vertical components. The horizontal component will remain constant throughout the flight, while the vertical component will be affected by gravity. We can use the following equations:

Horizontal motion:

x = v_x*t

Vertical motion:

y = v_y*t - (1/2)gt²

where:

We can solve for t by setting y = 0 (since the ball lands on the ground):

0 = v_y*t - (1/2)gt²

Solving for t, we get:

t = (2*v_y)/g

Now we can use the horizontal motion equation to solve for v_x:

x = v_xt

v_x = x/t

v_x = xg/(2*v_y)

Substituting the given values, we get:

v_x = (40.8 m)(9.81 m/s^2)/(2sin(42.0°)*cos(42.0°))

v_x ≈ 22.0 m/s

Learn more about initial speed here: https://brainly.com/question/24493758

#SPJ1

The amount of heat transferred to the wooden beam if it has mass 60kg is 70800 J

Amount is a mathematical concept that refers to the quantity or size of something. It can be used to describe a numerical value, such as a monetary amount, a quantity of units of measurement, or a count of items. Amounts can also be expressed in terms of fractions, decimals, or percentages. In everyday use, it is often used to refer to the total sum of money, goods, or services involved in a transaction. For example, when discussing a purchase, one might say "the amount was $25." Amount is also used in a more general sense, to refer to a large quantity or number of something. For example, one might say "there was a huge amount of people at the event."

Heat transferred (Q) = mass (m) x specific heat capacity (c) x change in temperature (ΔT)
Q = 60 kg x 0.84 J/g°C x (35°C - 15°C)
Q = 70800 J

To learn more about amount
https://brainly.com/question/29217523
#SPJ4

The fire started on the third floor of the building.

People smoking in bed can start fires.

A light switch with worn electrical wiring was found on the third floor.

A substantial risk factor for fire dangers is smoking in bed. This is due to the fact that cigarettes, cigars, and other smoking materials can continue to be hot for a number of hours after being put out.

Smoking materials can ignite flammable items like bedding or furniture if a smoker falls asleep while smoking or fails to properly discard them. This can cause a fire to swiftly spread across the entire room. One of the main causes of tragic fires in houses and other places is smoking in bed.

Learn more about fire incident:https://brainly.com/question/28159595

#SPJ1

There are 0.486 grams of magnesium in 0.02 moles of magnesium.

To calculate the grams of magnesium, you multiply the given moles (0.02 mol) by the molar mass (24.3 g/mol):

0.02 mol Mg × 24.3 g/mol Mg = 0.486 g Mg

Therefore, there are 0.486 grams of magnesium in 0.02 moles of magnesium.

It's important to note that molar mass allows us to convert between moles and grams. By multiplying the number of moles by the molar mass, we can determine the mass of the substance in grams.

This conversion is commonly used in chemistry to relate the quantity of a substance in moles to its corresponding mass in grams.

In this case, by multiplying the given moles (0.02 mol) of magnesium by the molar mass of magnesium (24.3 g/mol), we obtain the mass of magnesium in grams (0.486 g).

To learn more about magnesium, refer below:

https://brainly.com/question/1533548

#SPJ11

Answer:

Option (a)

Explanation:

Let c be the specific heat of water.

According to the principle of caloriemetry.

Heat lost by hot water = heat gained by cold water

200 x c x (70 - T) = 50 x c x (T - 20)

280 - 4T = T - 20

300 = 5T

T = 60 C

Explanation:

In a case whereby You add 50 mL of water at 20°C to 200 mL of water at 70°C the most likely final temperature of the mixture is A. 60°C.

Specific heat is the amount of heat energy required to raise the temperature of a unit mass of a substance by one degree Celsius (or one Kelvin). Different substances have different specific heats, which means that they require different amounts of heat energy to achieve the same temperature change.

The specific heat of water can be represented as c, following the principle of caloriemetry. (Heat lost by hot water) =( heat gained by cold water), thjen we can substitute the values as ;

[200 x c x (70 - T)] = [50 x c x (T - 20)]

[280 - 4T] = [T - 20]

[300 = 5T]

T = 60 C

Learn more about temperature at:

https://brainly.com/question/25677592

#SPJ1

After the collision, the two objects will stick together and move with a velocity of 5ms in the same direction.

Collision is a physical phenomenon that occurs when two or more objects interact with enough force to cause damage to one or more of the objects. This can occur when two objects come into contact with each other, or when two objects are moving at different speeds and collide with each other. Collisions can be caused by a variety of factors, including the speed and mass of the objects, the angle of their contact, and the surface area of the objects.

Scenario 1:

After the collision, the two objects will stick together and move with a velocity of 5ms in the same direction.

Scenario 2:

After the collision, the two objects will bounce off each other and move in opposite directions with the same velocity of 5ms.

To learn more about collision

https://brainly.com/question/7221794

#SPJ4

After 1.8 hours on the shelf, the activity of the drug tagged with 99m43Tc is approximately 8147 Bq.

Step 1: Calculate the number of half-lives that have passed.

To do this, divide the elapsed time (1.8 h) by the half-life of the isotope (6.05 h).
Number of half-lives = 1.8 h / 6.05 h = 0.2975 half-lives

Step 2: Use the decay formula to calculate the remaining activity.
The decay formula is R = R₀ * (1/2)^(t/T), where R is the remaining activity, R₀ is the initial activity, t is the elapsed time, and T is the half-life.

Step 3: Plug in the values and solve for R.

R = (1.0 x 10^4 Bq) * (1/2)^(0.2975)
R ≈ 1.0 x 10^4 Bq * 0.8147
R ≈ 8147 Bq

So, after 1.8 hours on the shelf, the activity of the drug tagged with 99m43Tc is approximately 8147 Bq.

To know more about activity, refer here:

https://brainly.com/question/31293301#

#SPJ11

The distance of the galaxy from Earth is approximately 34 Mpc or 111 million light-years away.

The distance of the galaxy from Earth can be calculated using Hubble's law, which states that the recessional velocity of a galaxy is proportional to its distance from Earth.

The proportionality constant is known as the Hubble constant, denoted by H. The current estimated value of the Hubble constant is approximately 73.3 km/s/Mpc.

To convert the given velocity from miles per hour to kilometers per second, we need to divide it by 2.237 × 10^5. Thus, the recessional velocity of the galaxy in km/s is approximately 2510 km/s.

Using Hubble's law, we can calculate the distance of the galaxy from Earth by dividing its velocity by the Hubble constant.

Therefore, the distance of the galaxy from Earth is approximately 34 Mpc or 111 million light-years away.

To know more about  Hubble's law, refer here:

https://brainly.com/question/13705068#

#SPJ11

The correct answer is option C. Chemical.

A chemical reaction is a process in which chemical bonds between atoms are broken and reformed, resulting in the creation of new substances with different properties from the original ones. During a chemical reaction, the atoms of the reactant molecules rearrange themselves to form new products, which can have different physical and chemical properties than the original substances.

Chemical reactions can be classified into different types based on the nature of the reactants and the products formed. For instance, a synthesis reaction is a type of chemical reaction in which two or more substances combine to form a more complex compound, while a decomposition reaction is a reaction in which a compound is broken down into simpler substances.

Chemical reactions are fundamental to many natural and industrial processes, from the production of fuels and materials to the metabolism of living organisms. Understanding the mechanisms and properties of chemical reactions is crucial for many fields of science, including chemistry, biochemistry, and materials science.

In conclusion, a chemical reaction is a process in which substances change to other substances as chemical bonds break and reform. It is a fundamental concept in chemistry and has important applications in many scientific and industrial fields.

Know more about chemical reaction click here:

https://brainly.com/question/29762834

#SPJ11

(a)(i) To calculate the change in wavelength of light received by an observer on the Earth, we can use the formula for redshift:

z = ∆λ/λ = v/c

where z is the redshift, ∆λ is the change in wavelength, λ is the original wavelength, v is the velocity of the galaxy, and c is the speed of light.

Substituting the given values, we get:

z = ∆λ/6.2 × 10−7 m = 3.9 × 104 km/s / 3.0 × 105 km/s

Solving for ∆λ, we get:

∆λ = λz = 6.2 × 10−7 m × 3.9 × 104 km/s / 3.0 × 105 km/s

∆λ = 8.06 × 10−11 m

Therefore, the change in the wavelength of the light received by an observer on Earth is 8.06 × 10−11 m.

(ii) The wavelength of the light that is received by the observer on Earth can be calculated using the formula:

λ' = λ + ∆λ

where λ' is the new wavelength and λ is the original wavelength.

Substituting the given values, we get:

λ' = 6.2 × 10−7 m + 8.06 × 10−11 m

λ' = 6.2008 × 10−7 m

Therefore, the wavelength of the light received by the observer on Earth is 6.2008 × 10−7 m.

(b) The redshift of galaxies supports the Big Bang theory in two ways:

1. According to the Big Bang theory, the universe is expanding. As the universe expands, galaxies move away from each other, and their light is redshifted. The greater the redshift, the faster the galaxy is moving away from us. The observation of redshift in distant galaxies provides evidence that the universe is indeed expanding.

2. The Big Bang theory predicts that the early universe was much denser and hotter than it is now. This high density and temperature would have caused the universe to emit a lot of radiation, including light. As the universe expanded, this radiation would have cooled and stretched, leading to a cosmic microwave background radiation that fills the universe. The observed spectrum of this radiation is consistent with the predictions of the Big Bang theory. The redshift of distant galaxies provides further evidence for the Big Bang theory, as it is consistent with the idea that the universe was much denser and hotter in the past.

1. The law of conservation of momentum and the law of action-reaction. 2. The law of inertia. 3. The law of action-reaction. 4. The law of action-reaction. 5. The law of inertia.

1. A car runs into a fence, and the fence dents the car.
This demonstrates Newton's Third Law of Motion, which states that for every action, there is an equal and opposite reaction. As the car hits the fence, the fence exerts an equal force back on the car, causing the dent.

2. Karen drops a marble on the ground, and it rolls across the floor in a straight line.
This example illustrates Newton's First Law of Motion, also known as the Law of Inertia. It states that an object at rest stays at rest, and an object in motion stays in motion with the same speed and direction unless acted upon by an unbalanced force. In this case, the marble keeps rolling in a straight line due to its inertia.

3. Matthew lets go of a recently blown up balloon, and it flies across the room as the air escapes.
This is an example of Newton's Third Law of Motion. As the air escapes from the balloon, it exerts a force in one direction. The balloon experiences an equal and opposite force, causing it to fly across the room.

4. Pushing your baby brother on the swing makes him go higher.
This situation demonstrates Newton's Second Law of Motion, which states that the acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass (F = ma). When you push the swing, you are applying a force that causes it to accelerate, making it go higher.

5. You place a pencil on your desk, and it stays there.
This example represents Newton's First Law of Motion (the Law of Inertia) again. The pencil remains at rest on the desk because there is no unbalanced force acting upon it.

For more about conservation:

https://brainly.com/question/30333660

#SPJ11

The wavelength of the light used in the experiment is approximately 5.69 × [tex]10^{-7}[/tex] meters.

In the two-slit experiment, the distance between the slits is known as the "d" value. The distance from the slits to the screen is known as the "L" value.

The third-order bright fringe is at the center of the third bright band on the screen. Using the formula, d sinθ = mλ, where d is the distance between the slits, θ is the angle between the center of the third-order bright fringe and the horizontal, m is the order of the bright fringe, and λ is the wavelength of light.

We know that d = 0.0236 mm, θ = 2.09°, and m = 3. Rearranging the formula to solve for λ, we get: λ = d sinθ / m

Substituting the values, we get: λ = (0.0236 mm) sin(2.09°) / 3

Converting the distance to meters and the angle to radians, we get: λ = (2.36 × 10^-5 m) sin(0.0364 rad) / 3

Solving this equation gives us: λ = 5.69 × [tex]10^{-7}[/tex] m

Therefore, the wavelength of the light used in the experiment is approximately 5.69 × [tex]10^{-7}[/tex] meters.

To know more about wavelength, refer here:

https://brainly.com/question/13533093#

#SPJ11

The power delivered to the device when connected to a 6.0 V battery is 10 W, which is less than the power delivered when connected to a 9.0 V battery.

The power delivered to the electronic device is proportional to the voltage supplied to it.

The relationship between power, voltage, and current is given by the equation P = VI, where P is power, V is voltage, and I is current. In this case, the power is given as 15 W when the device is connected to a 9.0 V battery.

Using the equation P = VI, we can solve for the current as I = P/V = 15 W / 9.0 V = 1.67 A. When the device is connected to a 6.0 V battery, the power delivered to the device can be calculated as P = VI = 1.67 A x 6.0 V = 10 W.

Therefore, the power delivered to the device when connected to a 6.0 V battery is 10 W, which is less than the power delivered when connected to a 9.0 V battery.

To know more about voltage, refer here:

https://brainly.com/question/13521443#

#SPJ11

The effective resistance of the TV set is 35.6 ohms (Ω).

To find the effective resistance of the TV set, we can use Ohm's Law, which states that Voltage (V) = Current (I) × Resistance (R). We need to rearrange the formula to solve for resistance: R = V / I.

Given the information in your question:
Current (I) = 2.5 A
Voltage (V) = 89 V

Now we can calculate the resistance (R):
R = V / I
R = 89 V / 2.5 A
R = 35.6 Ω

The effective resistance of the TV set is 35.6 ohms (Ω).

To learn more about current, refer below:

https://brainly.com/question/13076734

#SPJ11

(i). The flow speed in the smaller section is 11 m/s.

(ii).  The pressure in the smaller section is 7,352.56 Pa.

To solve this problem, we can apply the principle of conservation of mass and the Bernoulli's equation, which relates the pressure, velocity, and height of a fluid in a steady flow.

Given:

Density of the liquid (ρ) = 1.65 g/cm³ = 1650 kg/m³ (since 1 g/cm³ = 1000 kg/m³)

First section:

Cross-sectional area (A1) = 10 cm² = 0.001 m²

Flow speed (v1) = 275 cm/s = 2.75 m/s

Pressure (P1) = 1.20 ×[tex]10^5[/tex] Pa

Second section:

Cross-sectional area (A2) = 2.50 cm² = 0.00025 m²

(i) To find the flow speed in the smaller section (v2), we can use the principle of conservation of mass:

A1v1 = A2v2

Solving for v2:

v2 = (A1v1) / A2

v2 = (0.001 m² × 2.75 m/s) / 0.00025 m²

v2 = 11 m/s

(ii) To find the pressure in the smaller section (P2), we can use Bernoulli's equation:

P1 + (1/2)ρv1² + ρgh1 = P2 + (1/2)ρv2² + ρgh2

Since the two sections are horizontal, the heights (h1 and h2) are the same, so the terms ρgh1 and ρgh2 cancel out. Additionally, the liquid is assumed to be at the same height, so we can disregard the gravitational term.

Simplifying the equation:

P1 + (1/2)ρv1² = P2 + (1/2)ρv2²

Solving for P2:

P2 = P1 + (1/2)ρv1² - (1/2)ρv2²

P2 = 1.20 × [tex]10^5[/tex] Pa + (1/2) × 1650 kg/m³ × (2.75 m/s)² - (1/2) × 1650 kg/m³ × (11 m/s)²

P2 = 1.20 × [tex]10^5[/tex] Pa + 9526.56 Pa - 45675 Pa

P2 = 7,352.56 Pa

To know more about Bernoulli's equation refer here

https://brainly.com/question/29865910#

#SPJ11

The cable should have a diameter of approximately 0.092 cm or an order of magnitude of one centimeter.

To determine the diameter of the cable needed to support a tension of 20.0 kN, we can use the principle of cross-sectional area. The maximum tension that a wire can withstand is proportional to its cross-sectional area. Therefore, to support a tension that is 83.33 times greater than the maximum tension of a single wire, the cross-sectional area of the cable must also be 83.33 times greater.

The cross-sectional area of a wire is given by the formula A = πr², where A is the cross-sectional area, and r is the radius of the wire. Since the diameter of the wire is given as 1.00 mm, the radius is 0.50 mm or 0.005 cm. Therefore, the cross-sectional area of a single wire is:

A₁ = π(0.005 cm)² = 0.00007854 cm²

To find the diameter of the cable, we can use the formula for the cross-sectional area of a circle:

A₂ = πr₂²

where A₂ is the cross-sectional area of the cable and r₂ is the radius of the cable.

We know that the cross-sectional area of the cable needs to be 83.33 times greater than the cross-sectional area of a single wire:

A₂ = 83.33 A₁ = 83.33 x 0.00007854 cm² = 0.00654 cm²

Substituting this value into the formula for the cross-sectional area of a circle:

πr₂² = 0.00654 cm²

r₂² = 0.00654/π

r₂ = √(0.00654/π) = 0.046 cm

Therefore, the radius of the cable is 0.046 cm, and the diameter is twice that:

d = 2r₂ = 0.092 cm or 0.92 mm (to two significant figures)

In conclusion, the cable should have a diameter of the order of magnitude of one centimeter (0.092 cm).

To learn more about tension

https://brainly.com/question/30033702

#SPJ4

Answer:

Developing decision-making skills is a vital aspect that occurs during the stage of intellectual development in adolescent development.

Explanation:

During adolescence, individuals undergo significant changes in their cognitive abilities, including an increase in abstract thinking, reasoning, and problem-solving skills. These changes allow adolescents to start thinking critically and independently, weigh options, and make more informed decisions about their lives.

As adolescents develop their intellectual abilities, they also gain more control over their lives and begin to make decisions about their education, career paths, relationships, and other important aspects of their lives. This is a critical time for developing decision-making skills, as the decisions made during adolescence can have significant and long-lasting effects on individuals' lives.

While other aspects of adolescent development, such as social, emotional, and physical development, are also important, intellectual development plays a crucial role in helping adolescents navigate the complex and challenging decisions they face as they transition to adulthood.

A woman lifts up a laundry basket 1.5m and carries it 20m across the room in 15s.

Work is done on the laundry basket both in lifting the basket and in walking across the room during the entire 15s.

Lifting the basket:

The work done in lifting the basket is equal to the force applied multiplied by the distance lifted. The force applied is the weight of the basket, which is equal to the mass of the basket multiplied by the acceleration due to gravity (9.8 m/s^2).

Let's assume the mass of the basket is 'm'. The work done in lifting the basket vertically is given by:

Work_lift = force_lift × distance_lift = (m × 9.8) × 1.5

Carrying the basket horizontally:

When the woman carries the basket across the room, work is done against the force of friction between the basket and the floor. The work done is equal to the force of friction multiplied by the distance traveled horizontally.

The force of friction can be calculated using the coefficient of friction (μ) and the normal force (N). The normal force is equal to the weight of the basket since it is on a horizontal surface.

Let's assume the coefficient of friction between the basket and the floor is 'μ'. The work done in moving the basket horizontally is given by:

Work_horizontal = force_friction × distance_horizontal = (μ × m × 9.8) × 20

The total work done on the basket during the entire 15s is the sum of the work done in lifting and the work done horizontally:

Total work = Work_lift + Work_horizontal

To learn more about friction, refer below:

https://brainly.com/question/13000653

#SPJ11

The best table to describe the parts of the atom is a 3 column table with 3 rows. The first column is labeled Particle and contains the entries Proton, Electron, and Neutron.

Atom is an open source, cross-platform text editor developed by GitHub. It is a hackable text editor that can be customized to suit the user’s needs and preferences. It is based on Electron, a framework for building cross-platform applications using web technologies such as HTML, CSS and JavaScript. Atom supports multiple panes, allowing users to open and edit multiple files at the same time. It also offers syntax highlighting for a range of programming languages, a built-in package manager for adding new packages, and a selection of themes to customize the look of the editor.

The second column is labeled Charge and contains the entries Positive, 0, and Negative. The last column is labeled Location and contains the entries Inside Nucleus, Outside Nucleus, and Inside Nucleus.

To learn more about atom

https://brainly.com/question/621740

#SPJ4

In a coal plant, the coal is burned, converting its chemical energy into thermal energy. This thermal energy is then transferred from the burner to a boiler full of water.

As the boiler turns the water into steam, it is converted into kinetic energy which is used to turn the turbine. As the turbine turns, the generator's magnets inside a wire, its kinetic energy is converted into electrical energy.

Coal is one of the most widely used fossil fuels for electricity generation. However, burning coal releases harmful pollutants into the atmosphere, including carbon dioxide, sulfur dioxide,

and nitrogen oxides. These emissions contribute to global warming, acid rain, and respiratory diseases.

To address these concerns, many coal plants have implemented technologies such as scrubbers, which remove harmful pollutants from the emissions before they are released into the atmosphere.

Additionally, some coal plants are transitioning to cleaner energy sources such as natural gas, wind, and solar power.

Overall, while coal-fired power plants have played a significant role in powering modern society, their impact on the environment has led to a push for cleaner and more sustainable forms of energy.

To know more about thermal energy refer here

https://brainly.com/question/18989562#

#SPJ11

The work function of caesium being 3.0 x 10^-19 J means that to remove an electron from the surface of caesium, at least 3.0 x 10^-19 J of energy must be supplied to that electron.

The work function of a metal refers to the minimum amount of energy required to remove an electron from the surface of that metal. It is the energy required to overcome the attractive forces between the electron and the metal surface. The work function is usually denoted by the symbol Φ, and its unit is joules (J).

In the case of caesium, the work function is 3.0 x 10^-19 J. This means that to remove an electron from the surface of caesium, at least 3.0 x 10^-19 J of energy must be supplied to that electron.

To calculate the frequency of radiation needed to eject electrons of maximum kinetic energy 6.0 x 10^-19 J from a caesium surface, we can use the formula:

maximum kinetic energy = hf - Φ

where h is Planck's constant (6.626 x 10^-34 J s), f is the frequency of the radiation, and Φ is the work function.

If we rearrange this formula to solve for the frequency f, we get:

f = (maximum kinetic energy + Φ) / h

Substituting the given values, we get:

f = (6.0 x 10^-19 J + 3.0 x 10^-19 J) / (6.626 x 10^-34 J s)

f = 7.57 x 10^14 Hz

Therefore, the frequency of radiation needed to eject electrons of maximum kinetic energy 6.0 x 10^-19 J from a caesium surface is 7.57 x 10^14 Hz.

More on work functions can be found here: https://brainly.com/question/20523183

#SPJ1

When energy leaves the sun's core, it travels through the radiative zone in the form of c. electromagnetic waves.

This is also called as radiative energy. The radiative zone is the second zone of the sun, and it is the region where the energy created by nuclear reactions in the core is transferred through the Sun's outer layers. In this zone, the energy moves in the form of photons, which are particles of light that carry the energy.

The radiative zone is characterized by the high temperature and density of its materials, which cause the photons to scatter frequently before they can escape the zone. The photons that make it through the radiative zone eventually reach the convective zone, where they transfer their energy to the gas particles that rise and fall in the Sun's atmosphere through convection currents. These currents help distribute the energy from the core to the outer layers of the Sun and eventually to space.

In summary, the correct answer to the question is c. electromagnetic waves, which travel through the radiative zone as particles of light or photons.

Learn more about electromagnetic waves at: https://brainly.com/question/11820725

#SPJ11

The acceleration of the box can be determined using Newton's second law of motion, where the net force acting on the box is equal to the mass of the box multiplied by its acceleration.

In this case, the net force acting on the box is equal to the force of the rope (250 n at an angle of 32.0° above the horizontal) minus the force of kinetic friction (0.350 × 50 kg × 9.81 m/s2). After solving for the acceleration, the acceleration of the box is 5.3 m/s2.

To summarise, the acceleration of a box being pulled along a horizontal surface with a force of 250 n at an angle of 32.0° above the horizontal and a coefficient of kinetic friction of 0.350 is 5.3 m/s2. This acceleration can be determined by using Newton's second law of motion and calculating the net force acting on the box.

Know more about  Newton's second law of motion here

https://brainly.com/question/13447525#

#SPJ11

The Sun appears bigger and brighter than other stars in the sky because it is much closer to the Earth than any other star.

While the Sun is only an average-sized star, it is still much closer to us than any other star, so it appears larger and brighter in the sky.

Additionally, the Sun is also the closest star to the Earth that undergoes nuclear fusion, which is the process that produces its energy and makes it shine.

Other stars in the sky may be much larger or brighter than the Sun, but their distance from us makes them appear much smaller and dimmer.

To know more about nuclear fusion refer here

https://brainly.com/question/12701636#

#SPJ11

The decibel level of the street on a weekend with 16 cars passing every minute is approximately 60.96 dB.

On a workday, the average decibel level of a busy street is 69 dB, with 102 cars passing a given point every minute. If the number of cars is reduced to 16 cars every minute on a weekend,

We want to find the decibel level of the street, assuming that sound intensity is proportional to the number of cars passing per minute.

Step 1: Determine the ratio of cars between workday and weekend.

Divide the number of cars on the weekend (16) by the number of cars on a workday (102):

16/102 ≈ 0.1569

Step 2: Since sound intensity is proportional to the number of cars passing per minute, the ratio of sound intensities is the same as the ratio of cars.

Intensity_ratio = 0.1569

Step 3: Calculate the intensity of the sound in dB on a workday (I1) and the intensity of the sound in dB on a weekend

(I2) using the formula:

I2 = I1 * Intensity_ratio

Step 4: Convert the intensities to decibels using the formula:

dB = 10 * log10(I2/I1)

Step 5: Substitute the known values into the equation:

dB = 10 * log10(0.1569)

Step 6: Calculate the decibel level difference:

dB ≈ -8.04

Step 7: Subtract the decibel level difference from the original workday decibel level:

Weekend decibel level = 69 - 8.04

                                       ≈ 60.96 dB

Therefore, the decibel level of the street on a weekend with 16 cars passing every minute is approximately 60.96 dB.

To know more about every minute  refer here

brainly.com/question/28529831#

#SPJ11

The buildings in UAE made with glazed glass is because of their low maintenance and ease of installation.

Glazed glass means the glass that is used for buildings and architectural purposes. The glass facades are specifically energy efficient and support green glazing. In UAE buildings, the majority of glazing is to achieve a shading co-efficient of 0.25 which results in high-performance glazing. Glass transmits up to 80% of natural daylight and ensures cost savings.

Glass buildings help in energy efficiency in Eastern countries. Adopting glass on buildings is not easy in Middle Eastern countries due to extreme weather conditions. But the technologies made it possible and glass become a widely used material in the Middle East.

To know more about Glazed glass:

https://brainly.com/question/31455188

#SPJ1

The length of the pendulum is 0.389 m.

The length of a simple pendulum can be calculated using the equation:

T = 2π√(L/g)

where T is the period of the pendulum, L is the length of the pendulum, and g is the acceleration due to gravity.

Rearranging the equation to solve for L, we get:

L = (gT²)/(4π²)

Substituting the given values, we get:

L = (9.8 m/s²)(3.15 s)²/(4π²) = 0.389 m

As a result, the pendulum's length is 0.389 m.

A longer pendulum will have a longer period and a shorter pendulum will have a shorter period, all other factors remaining constant. Similarly, a higher acceleration due to gravity will result in a shorter period, while a lower acceleration due to gravity will result in a longer period.

To know more about the Pendulum, here

https://brainly.com/question/29511476

#SPJ4