Assuming that clay blob and super ball have the same mass, you should throw clay blob at the door to close it.
What is momentum?Momentum is a fundamental concept in physics that describes quantity of motion of any object.
You should throw clay blob at the door to close it because the clay blob will stick to the door upon impact, transferring its momentum to door and effectively closing it.
If super ball is thrown at the door, it will bounce back with almost the same speed it had before it collided with door. This means that super ball will not transfer as much momentum to the door and door may not close fully.
To know more about momentum, refer
https://brainly.com/question/1042017
#SPJ1
in terms of what you would actually observe, what does it mean to say that the moon apparently moves eastward among the stars?
When we say that the moon is moving eastward among the stars, we are referring to its apparent motion across the night sky relative to the fixed position of the stars.
When we observe the moon in the night sky, we can see that it appears to move across the sky over time. If we were to track its path over several nights, we would notice that it moves in an eastward direction relative to the stars.
This means that the moon appears to be traveling along the same path as the stars, but at a slightly faster pace. This is because the moon is orbiting around the Earth, which is rotating on its axis, causing the stars to appear to move in a circular pattern in the sky.
So when we say that the moon is moving eastward among the stars, we are referring to its apparent motion across the night sky relative to the fixed position of the stars.
Learn more about "moon": https://brainly.com/question/4208016
#SPJ11
a ball is dropped from a height of 12m. each time the ball hits the ground, it bounces back 5/6th of the previous height. what is the total distance it travels before it comes to rest?
The ball travels a total distance of approximately 89.59 meters before coming to rest.
When the ball is dropped from a height of 12m, it will first travel downwards and then bounce back up to a height of 5/6 x 12m = 10m (assuming no energy is lost during the bounce). The distance traveled during the first part of the motion is simply the distance it fell, which is 12m.
When the ball reaches the top of its first bounce, it will fall back down and then bounce back up again. This process will repeat until the ball comes to rest. The distance traveled during each bounce is twice the height of the bounce (up and down), which is 2 x[tex](5/6)^n[/tex]x 12m, where n is the number of bounces.
The ball will come to rest when it bounces to a height less than the smallest unit of measurement given (in this case, meters). So we can set up an inequality to find the number of bounces:
[tex](5/6)^n[/tex] x 12m < 1m
Taking the logarithm of both sides (with base 5/6), we get:
n > log(1/12)/log(5/6)
n > 5.2
Since n must be a whole number, the ball will bounce 6 times before coming to rest.
The total distance traveled by the ball is the sum of the distances traveled during each bounce, plus the distance traveled during the first part of the motion:
Total distance = 12m + 2 x [tex](5/6)^1[/tex]x 12m + 2 x [tex](5/6)^2[/tex] x 12m + ... + 2 x[tex](5/6)^5[/tex]x 12m
Total distance = 12m x (1 + 2 x (5/6) + 2 x [tex](5/6)^2[/tex] + ... + 2 x [tex](5/6)^5[/tex])
This is a geometric series with first term a = 1 and common ratio r = 5/6. The sum of the first n terms of a geometric series is given by:
S_n = a(1 - [tex]r^n[/tex])/(1 - r)
Substituting the values for a, r, and n, we get:
Total distance = 12m x (1 - [tex](5/6)^6[/tex])/(1 - 5/6)
Total distance = 12m x 7.466 = 89.59m (rounded to two decimal places)
Therefore, the ball travels a total distance of approximately 89.59 meters before coming to rest.
To learn more about distance visit:
https://brainly.com/question/26711747
#SPJ11
satellites in low-earth orbits are more likely to crash to earth during the solar maximum periods of the sunspot cycle because
Satellites in low-Earth orbits are more likely to crash to Earth during the maximum solar periods of the sunspot cycle because, during these periods, there is increased solar activity, such as solar flares and coronal mass ejections.
This heightened activity leads to stronger solar radiation and an expansion of Earth's atmosphere, causing an increased drag on satellites. As a result, the satellites' orbits decay faster, making them more prone to crashing into Earth.
The sunspot cycle is directly relevant to us here on Earth because it can cause coronal mass ejections and other activity that can disrupt radio communications and knock out sensitive electronic equipment. It also plays a significant role in global warming, affects compass needles, affects plant photosynthesis, and strongly influences the earth's weather.
This means that the sunspot cycle can have a significant impact on our technology and communication systems, which are critical to our daily lives. Coronal mass ejections can cause major geomagnetic storms that have the potential to knock out power grids, damage satellites, and disrupt GPS signals. These storms can also create beautiful auroras that are visible in many parts of the world, but they can also have severe consequences for our infrastructure.
To learn more about the sunspot cycle : https://brainly.com/question/8102155
#SPJ11
the compound methyl butanoate smells like apples. its % composition is 58.8% C, 9.8% H, and 31.4 O and its molar mass 102g. Empirical formula? molecular formula?
The empirical formula of the compound is C2H4O and the molecular formula is C9H16O4.
The compound methyl butanoate has the chemical formula C5H10O2. To find the empirical formula, we need to divide each percentage by its respective atomic weight, and then divide all values by the smallest value obtained. Doing this, we get a ratio of C2H4O, which is the empirical formula.
To find the molecular formula, we need to determine the molecular weight of the empirical formula (C2H4O), which is 60 g/mol. We can then divide the molar mass of the compound (102 g/mol) by the empirical formula weight (60 g/mol), which gives us a ratio of 1.7. Multiplying the subscripts in the empirical formula by 1.7 gives us the molecular formula, which is C9H16O4.
To learn more about mass click here
brainly.com/question/30337818
#SPJ11
an unpolarized beam of light with an intensity of 2000 w/m2 is incident on two ideal polarizing sheets. if the angle between the two polarizers is 0.157 rad, what is the emerging light intensity?
An unpolarized beam of light with an intensity of 2000 w/m² is incident on two ideal polarizing sheets, the emerging light intensity is approximately 1968.13 W/m².
Malus's law can be used to determine the intensity of the light that emerges from a pair of perfect polarising sheets after an unpolarized beam of light passes through them.
According to Malus's law, the amount of light that passes through a polarizer is determined by:
I = I₀ × cos²θ,
In this case,
The incident intensity I₀ = 2000 W/m²
The angle between the two polarizers = 0.157 rad.
Applying Malus's law twice, we have:
I = I₀ × cos²(0.157) × cos²(0.157)
≈ 2000 × (cos²(0.157))².
Evaluating this expression, we find:
I ≈ 2000 × (0.992)²
≈ 2000 × 0.984064
≈ 1968.13 W/m².
Thus, the emerging light intensity is approximately 1968.13 W/m².
For more details regarding polarizer, visit:
https://brainly.com/question/16106487
#SPJ12
according to the equilibrium model of the timing of the tides, what should the time between successive high tides be for a diurnal tide?
According to the equilibrium model of the timing of the tides, the time between successive high tides for a diurnal tide.
The equilibrium theory of tides is a simplified model that assumes that the Earth is covered by a large, uniform ocean and that the tides are caused by the gravitational attraction of the Moon and the Sun. According to this theory, the tides are in equilibrium with the gravitational forces that create them, and the tides respond to changes in the gravitational forces with a time lag.
For a diurnal tide, there is only one high tide and one low tide per day. The time between successive high tides is determined by the time it takes for the Earth to rotate once on its axis and for the Moon to complete one orbit around the Earth.
The Moon's orbit is not perfectly circular, so its distance from the Earth varies over time. This means that the gravitational force it exerts on the Earth also varies. The time it takes for the Moon to return to the same position relative to the Earth is about 24 hours and 50 minutes.
Hence, according to the equilibrium model of the timing of the tides, the time between successive high tides for a diurnal tide should be approximately 24 hours and 50 minutes.
To know more about equilibrium model here
https://brainly.com/question/31516588
#SPJ4
assume that you are in a bowling alley and you see a bowling ball (of the sort that has no finger holes) and a helium-filled balloon that has the exact same size and shape as the bowling ball. on which object is the buoyant force greater?group of answer choicesthe bowling ball.there is no buoyant force on either object.the balloon.neither, the magnitude of the buoyant force is not zero, but it is the same on both objects.
You are in a bowling alley and you see a bowling ball (of the sort that has no finger holes) and a helium-filled balloon that has the exact same size and shape as the bowling ball. The buoyant force is greater on the helium-filled balloon.
To explain this, let's first understand buoyant force. The buoyant force is the upward force exerted on an object submerged in a fluid, which opposes the weight of the object. It is determined by the weight of the fluid displaced by the object.
In the given scenario, both the bowling ball and the helium-filled balloon have the same size and shape, which means they displace the same volume of air. However, the balloon is lighter due to the helium gas inside. The buoyant force acting on the balloon is greater than its weight, which causes the balloon to float. On the other hand, the bowling ball is much heavier, and the buoyant force acting on it is not enough to counteract its weight, which is why it doesn't float. Therefore, the buoyant force is greater on the helium-filled balloon.
Learn more about buoyant force here:
https://brainly.com/question/11884584
#SPJ11
Find the time required for a turntable to accelerate at a constant rate from rest to an angular velocity of 477 rev/min if it experiences a constant acceleration of 7.94 rad/s^2.
To find the time required for the turntable to accelerate at a constant rate from rest to an angular velocity of 477 rev/min, we need to use the following formula:
ω = ω0 + αt
where ω is the final angular velocity, ω0 is the initial angular velocity (which is 0 in this case since the turntable starts from rest), α is the constant angular acceleration, and t is the time taken to reach the final angular velocity.
First, let's convert 477 rev/min to rad/s:
ω = 477 rev/min * (2π rad/rev) * (1/60 min/s) = 49.89 rad/s
Now we can substitute the values into the formula and solve for t:
49.89 rad/s = 0 + 7.94 rad/s^2 * t
t = 6.28 seconds
Therefore, it would take 6.28 seconds for the turntable to accelerate at a constant rate from rest to an angular velocity of 477 rev/min if it experiences a constant acceleration of 7.94 rad/s^2.
To know more about angular acceleration:
https://brainly.com/question/30237820
#SPJ11
Two stationary point charges of +90. 0 μC and -40. 0 μC exert an attractive force on each other of 293 N. What is the distance between the two charges?
The distance between the two charges is approximately 0.0107 meters, or 10.7 millimeters.
Coulomb's Law, which states that the force between two point charges is directly proportional to the product of their charges and inversely proportional to the square of the distance between them, can be used to compute the attractive force between two point charges.
Coulomb's Law is formulated as follows:
F = k × |q₁ × q₂| / r²
where:
F = force between the charges (in newtons, N)
k = Coulomb's constant, which is approximately 8.99 x 10⁻⁹Nm²/C²
q₁ and q₂ = charges of the two point charges (in coulombs, C)
r = distance between the charges (in meters, m)
Given:
q₁ = +90.0 μC = 90.0 x 10⁻⁶C
q₂ = -40.0 μC = -40.0 x 10⁻⁶ C
F = 293 N
k = 8.99 x 10⁹ Nm²/C²
Plugging these values into the formula, we can solve for r:
293 = 8.99 x 10⁹ x |90.0 x 10⁻⁶ x -40.0 x 10⁻⁶| / r²
To simplify the calculation, we can take the absolute value of the product of the charges, since distance is always positive:
293 = 8.99 x 10⁹ x 90.0 x 10⁻⁶ x -40.0 x 10⁻⁶ / r²
Now we can solve for r:
r² = 8.99 x 10⁹ x90.0 x 10⁻⁶ x -40.0 x 10⁻⁶/ 293
r² = 0.000011456
r = √(0.000011456)
r ≈ 0.0107 m
So, the distance between the two charges would be approximately 0.0107 meters, or 10.7 millimeters.
To know more about charges
https://brainly.com/question/28196549
#SPJ4
a mirror is shaped like a paraboloid of revolution and will be used to concentrate the rays of the sun at its focus, creating a heat source. see the figure. if the mirror is 20 feet across at its opening and is 6 feet deep, where will the heat source be concentrated?
The heat source will be concentrated at a point 6 feet deep in the center of the mirror.
What is mirror equation?The mirror equation is a fundamental equation in optics that relates the distance of an object from a curved mirror to the distance of its image from the mirror. It is also known as the mirror formula.
To find the focal point of a parabolic mirror, we need to use the mirror equation:
[tex]1/f = 1/p + 1/q[/tex]
where f is the focal length, [tex]p[/tex] is the distance between the mirror and the object, and q is the distance between the mirror and the image.
For a parabolic mirror, we can assume that the object is at infinity, so [tex]p[/tex] is essentially infinite. Therefore, the equation simplifies to:
[tex]1/f = 1/q[/tex]
We also know that the diameter of the mirror is [tex]20[/tex] feet, which means the radius is 10 feet. Using the equation for a parabola:
[tex]y^2 = 4px[/tex]
where y is the distance from the vertex of the parabola to a point on the curve, and x is the horizontal distance from the vertex. At the opening of the mirror, [tex]y = 0[/tex] and [tex]x = 10[/tex], so we can solve for [tex]p[/tex]:
[tex]0^2 = 4p(10)[/tex]
[tex]p = 0[/tex]
This means the mirror's focus is located at its vertex, which is [tex]6 feet[/tex] deep. Therefore, the heat source will be concentrated at a point [tex]6 feet[/tex] deep in the center of the mirror.
Learn more about parabola here:
https://brainly.com/question/31142122
#SPJ1
What is the increase in water temperature at the bottom of the falls if all the initial potential energy goes into heating the water? (g = 9.8 m/s2, cw = 4 186 J/kg⋅°C)
a. 0.16°C
b. 0.34°C
c. 0.69°C
d. 1.04°C
The correct option is option (a) 0.16°C.
We can use the equation for potential energy, which is PE = mgh, where m is the mass of the water, g is the acceleration due to gravity, and h is the height of the falls. We can assume that all of the potential energy is converted to thermal energy, which is given by Q = mcΔT, where Q is the amount of heat transferred, m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature. We can set these two equations equal to each other and solve for ΔT:
mgh = mcΔT
Canceling out the mass of the water and dividing both sides by c, we get:
gh/c = ΔT
Substituting in the given values of g, h, and c, we get:
(9.8 m/s^2)(80 m)/(4,186 J/kg°C) = 0.186°C
Therefore, the increase in water temperature at the bottom of the falls if all the initial potential energy goes into heating the water is approximately 0.186°C, which is closest to answer choice (a) 0.16°C.
Learn more about potential energy here:
https://brainly.com/question/15764612
#SPJ11
how did you set the configuration of the rc circuit to smooth the rectified signal? why choose this r-value and c-value? what will happen when the capacitance value drops?
In order to set the configuration of RC circuit to smooth a rectified signal, one needs to choose the right combination of resistor and capacitor values.
The R-value controls the charging and discharging rate of the capacitor, while the C-value determines the amount of charge it can store.
The time constant depends on R and C and determines the capacitor's charging or discharging time.
Longer time constants lead to smoother output signals but cause response delays. Choosing appropriate R and C values requires balancing the desired smoothing effect, input signal characteristics, power dissipation in the resistor, maximum voltage rating of the capacitor, and temperature coefficient.
It is important to make a careful selection to avoid instability or damage to the RC circuit.
Read more about Rectified signal.
https://brainly.com/question/15518595
#SPJ11
Beats are the result of the alternate cancellation and reinforcement of two sound waves of
Beats are the result of the alternate cancellation and reinforcement of two sound waves of slightly different frequencies. When two waves with different frequencies interfere with each other, they create a pattern of alternating loud and soft sounds, which is known as beats.
The frequency of the beats is equal to the difference between the frequencies of the two waves. For example, if two waves with frequencies of 500 Hz and 505 Hz interfere with each other, they will produce beats with a frequency of 5 Hz. The amplitude of the beats depends on the amplitude and phase of the two waves, as well as the frequency difference between them.
Beats can be heard when two instruments playing slightly out of tune with each other, or when tuning an instrument to a reference tone. They can also be used in music to create interesting and complex rhythms and harmonies.
To learn more about frequencies visit: https://brainly.com/question/5102661
#SPJ11
What is the force between the Earth and the moon given that the Earth has a mass of 5.98 x 10^24 kg, the moon has a mass of 7.35 x 10^22 kg and the radius of the moon's orbit is 3.85 x 10^8 m?
The force between the Earth and the moon is determined by the gravitational attraction between the two objects, which is given by the equation F = G(m1m2)/r^2, where F is the force, G is the gravitational constant (6.67 x 10^-11 N*m^2/kg^2), m1 and m2 are the masses of the two objects, and r is the distance between them.
Using the given values, we can calculate the force between the Earth and the moon as follows:
F = G(m1m2)/r^2
F = (6.67 x 10^-11 N*m^2/kg^2) * (5.98 x 10^24 kg) * (7.35 x 10^22 kg) / (3.85 x 10^8 m)^2
F = 1.98 x 10^20 N
Therefore, the force between the Earth and the moon is approximately 1.98 x 10^20 Newtons. This force is what keeps the moon in orbit around the Earth.
Learn more about gravitational attraction here:
brainly.com/question/28523231
#SPJ11
a dentist's chair with a patient in it weighs 1540 n. the output plunger of a hydraulic system begins to lift the chair, when the dentist's foot applies a force of 63.9 n to the input piston. neglect any height difference between the plunger and the piston. what is the ratio of the radius of the plunger to the radius of the piston?
The radius of the output plunger to the radius of the input piston is roughly 6.43.
What is the plunger radius to piston radius ratio?
We can use the principle of hydraulic systems, which states that the pressure applied to an incompressible fluid in a closed system is transmitted equally throughout the system. Therefore, the pressure applied to the input piston is equal to the pressure applied to the output plunger.
Let's denote the radius of the input piston as r1, and the radius of the output plunger as r2. The force applied to the input piston is F1 = 63.9 N, and the weight of the chair is F2 = 1540 N.
The input piston is under the following pressure:
P1 = F1 / A1
= F1 / (π * r1^2)
where A1 is the area of the input piston.
The pressure applied to the output plunger is:
P2 = F2 / A2
= F2 / (π * r2^2)
A2 denotes the area of the output plunger.
Because the pressure is distributed evenly throughout the system, we have:
P1 = P2
Therefore,
F1 / (π * r1^2) =
F2 / (π * r2^2)
Simplifying this equation, we get:
r2^2 / r1^2 = F2 / F1
Substituting the values, we get:
r2^2 / r1^2 = 1540 N / 63.9 N
r2 / r1 = √(1540 / 63.9)
r2 / r1 = 6.43
As a result, the radius of the output plunger to the radius of the input piston is roughly 6.43.
To learn more about piston, visit: https://brainly.com/question/15018786
#SPJ1
If the only forces acting on a 2.0-kg mass are F1 = (3i - 8j) N and F2 = (5i + 3j) N, what is the magnitude of the acceleration of the particle?
1) 1.5 m/s2
2) 6.5 m/s2
3) 4.7 m/s2
4) 9.4 m/s2
5) 7.2 m/s2
The magnitude of the acceleration of the particle is 4.7 m/s^2, which is closest to option (3) 4.7 m/s^2.
To find the magnitude of the acceleration of the 2.0-kg mass, we need to use Newton's second law, which states that the net force on an object is equal to the mass of the object times its acceleration. Therefore, we can write:
ΣF = ma
where ΣF is the vector sum of all the forces acting on the object, m is the mass of the object, and a is its acceleration.
To find the vector sum of the forces, we can add up their x- and y-components separately. Therefore,
ΣF = F1 + F2 = (3i - 8j) N + (5i + 3j) N = 8i - 5j N
Now, we can write the equation of motion for the object in the x- and y-directions separately:
ΣFx = max
and
ΣFy = may
where ΣFx and ΣFy are the x- and y-components of the net force, respectively.
Substituting the expressions for ΣF and m, we get:
8i - 5j N = (2.0 kg) * (ax i + ay j)
Equating the x- and y-components separately, we get:
8 N = 2.0 kg * ax
and
-5 N = 2.0 kg * ay
Solving for ax and ay, we get:
ax = 4.0 m/s^2
and
ay = -2.5 m/s^2
The magnitude of the acceleration of the particle is given by:
a = √(ax^2 + ay^2) = √(4.0^2 + (-2.5)^2) = 4.7 m/s^2
Therefore, the magnitude of the acceleration of the particle is 4.7 m/s^2, which is closest to option (3) 4.7 m/s^2.
To learn more about magnitude visit:
https://brainly.com/question/15681399
#SPJ11
A pendulum has a bob with a mass of 25.0kg and a length of 0.750m. It is pulled back a distance of 0.250m. What is the displacement of the pendulum when it has been swinging for 2.00s?
The displacement of the pendulum is 0.815 m.
Mass of the pendulum, m = 25 kg
Length of the pendulum, l = 0.75 m
Distance moved by the pendulum, x = 0.25 m
Therefore, acceleration of the pendulum,
a = -(g/l) x the negative sign implies the restoring force.
a = -(9.8/0.75) 0.25
a = -3.26 m/s²
Time period of the pendulum = 2 s
Angular frequency, ω = 2[tex]\pi[/tex]/T
ω = 2 x 3.14/2
ω = 2 s⁻¹
Displacement,
x' = -(a/ω²)
x' = 3.26/4
x' = 0.815 m
To learn more about displacement of pendulum, click:
https://brainly.com/question/3187970
#SPJ4
five objects of mass m move at velocity v at a distance r from an axis of rotation perpendicular to the page through point a the one that has zero angular momentum about that axis is
The object that has zero angular momentum about that axis is the one that is located exactly on the axis. This is because angular momentum is the product of an object's moment of inertia (which depends on its mass and distribution) and its angular velocity.
Since the axis of rotation is perpendicular to the page, the distance of each object from the axis is the same. Therefore, the only factor that affects angular momentum is the mass and velocity of each object. Since all five objects have the same mass and velocity, the only way to have zero angular momentum is to have one object on the axis, which would have zero distance from the axis.
To determine the object with zero angular momentum, we must consider the relationship between angular momentum (L), mass (m), velocity (v), and distance (r) from the axis of rotation. The formula for angular momentum is:
L = m * v * r
An object has zero angular momentum when L = 0. In this case, one of the factors (m, v, or r) must be zero. Since all five objects have mass m and velocity v, the only factor that can be zero is the distance (r). Therefore, the object with zero angular momentum is the one located at point A, where the distance r from the axis of rotation is zero.
learn more about angular momentum here: brainly.com/question/29512279
#SPJ11
A merry go round has a radius of 4 m and completes a revolution in 2 s. Then acceleration of a point on its rim will be: pi^2/200
The acceleration of the point on the rim of the merry-go-round is π^2 m/s^2. However, this is not the same as the given answer of π^2/200.
The acceleration of a point on the rim of a merry-go-round can be found using the following formula:
a = v^2/r
where v is the velocity of the point and r is the radius of the merry-go-round.
To find the velocity of the point, we can use the fact that the merry-go-round completes one revolution in 2 seconds. This means that the angular velocity (ω) of the merry-go-round is:
ω = 2π/2 = π rad/s
The velocity of a point on the rim of the merry-go-round is equal to the product of its angular velocity and the radius of the merry-go-round:
v = ωr = π × 4 m = 4π m/s
Now, we can calculate the acceleration of the point on the rim:
a = v^2/r = (4π m/s)^2/4 m = π^2 m/s^2
So, the acceleration of the point on the rim of the merry-go-round is π^2 m/s^2. However, this is not the same as the given answer of π^2/200.
To learn more about acceleration visit: https://brainly.com/question/12550364
#SPJ11
What is Van der Waals equation and letter meanings
The Van der Waals equation is [tex]F_{}(r)=- \frac {AR_1R_2}{(R_1+R_2)6r^2}[/tex], The meaning of the letter are,
F(r) = van der wall force,
R₁ = radius of first atom,
R₂ = radius of second atom,
r = distance between two atoms.
Van der Waals forces, which depend on the separation between atoms or molecules, are weak intermolecular forces. These interactions between uncharged atoms and molecules give rise to these forces. the above equation is a van der waals force where each notation has physical meaning
To know more about van der Waal force :
https://brainly.com/question/13201335
#SPJ4.
Imagine that a sprinter accelerates from rest to a maximum speed of 10.1 m/s in 2.2 s. In what time interval will he finish the 100-m race if he keeps his speed constant at 10.1 m/s for the last part of the race?
The sprinter will finish the 100m race in 9.90 seconds if he runs at constant speed of 10.1 m/s.
In order to find the time that the sprinter will take to finish the 100 m race if he maintains constant speed of 10.1 m/s for the last part of the race.
The acceleration can be found using the relation,
a = (v₂ - v₁)/t, v₂ and v₁ are the final and initial speed of the sprinter and a ant t are time acceleration and time of the sprinter in the race.
= (10.1m/s-0m/s)/2.2 s
= 4.59 m/s²
Now, using the kinematic equations of motion to find the time that the sprinter will take,
x = v₁t + (1/2)at²
100 m = 0 + (1/2)4.59m/s²(t²)
t = √(100m x 2/4.59m/s²)
= 4.95 seconds.
Now, adding the time that sprinter take to cover the last part to get the final time to finish the race.
T = 4.95s+(100m/10.1m/s)
= 9.90 seconds.
Therefore, the sprinter will finish the 100m race in 9.90 seconds with a constant speed of 10.1m/s that he maintains at the end.
To know more about Kinematic equations, visit,
https://brainly.com/question/24458315
#SPJ4
What's the difference of Van der wall vs IDG law?
The Ideal Gas Law assumes gas molecules have zero volume and do not interact with each other, while the Van der Waals equation accounts for their finite volume and intermolecular forces. The Van der Waals equation is more accurate at high pressures and low temperatures, while the Ideal Gas Law is more accurate at low pressures and high temperatures.
State the differences between Van der wall vs IDG law.The Van der Waals equation of state and the Ideal Gas Law are two different equations used to describe the behavior of gases.
The Ideal Gas Law is based on the assumption that gas molecules have zero volume and do not interact with each other, except during elastic collisions. It is represented by the equation PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the universal gas constant, and T is the temperature.
The Van der Waals equation of state, on the other hand, accounts for the fact that gas molecules do have finite volumes and that they interact with each other through intermolecular forces. It is represented by the equation: (P + a(n/V)²)(V-nb) = nRT, where a and b are empirical constants that take into account the attractive and repulsive forces between gas molecules, respectively.
In summary, the Ideal Gas Law assumes that gas molecules have zero volume and do not interact with each other, while the Van der Waals equation accounts for the finite volume and intermolecular forces between gas molecules. The Van der Waals equation is more accurate at high pressures and low temperatures, while the Ideal Gas Law is more accurate at low pressures and high temperatures.
Learn more about Ideal Gas Law
brainly.com/question/28257995
#SPJ11
An object's moment of inertia is 2.5 kg⋅m^2 . Its angular velocity is increasing at the rate of 3.2 rad/s per second.What is the net torque on the object?
The net torque on the object given moment of inertia is 2.5 kg⋅[tex]m^2[/tex] and Its angular velocity is increasing at the rate of 3.2 rad/s per second is 8 N⋅m.
The net torque on an object can be found using the formula: τ = Iα, where τ is the net torque, I is the moment of inertia, and α is the angular acceleration. To use this formula, we need to first find the angular acceleration of the object.
We are given that the object's moment of inertia is 2.5 kg⋅[tex]m^2[/tex] and its angular velocity is increasing at the rate of 3.2 rad/s per second. We know that angular acceleration is the rate at which the angular velocity changes, so we can use the formula α = Δω/Δt to find the angular acceleration.
Δω = 3.2 rad/s (since the angular velocity is increasing at a rate of 3.2 rad/s per second)
Δt = 1 s (since we are given that the rate of change is per second)
Therefore, α = 3.2 rad/s / 1 s = 3.2 [tex]rad/s^2[/tex]
Now that we have the moment of inertia (I) and the angular acceleration (α), we can use the formula τ = Iα to find the net torque.
τ = 2.5 [tex]kg.m^2[/tex] x 3.2 [tex]rad/s^2[/tex] = 8 N⋅m
Therefore, the net torque on the object is 8 N⋅m.
For more such questions on Net torque.
https://brainly.com/question/9612563#
#SPJ11
Compare the escape velocity of two rockets, a lighter one weighing 2000N and a heavier one weighing 4000N. The lighter 2000N rocket has an escape velocity the is ___ the heavier rocket.
The escape velocity of the lighter 2000N rocket is lower than the escape velocity of the heavier 4000N rocket.
The escape velocity of a rocket depends on its mass and the gravitational force of the planet or object it is trying to escape from. The formula for calculating escape velocity is v = √(2GM/r), where v is the escape velocity, G is the gravitational constant, M is the mass of the planet or object, and r is the distance from the center of the planet or object to the rocket.
Assuming that both rockets are trying to escape from the same planet or object, we can compare their escape velocities using the formula above. Since the mass of the rocket affects the escape velocity, we can expect that the heavier 4000N rocket will have a higher escape velocity than the lighter 2000N rocket.
To calculate the exact values, we would need to know the mass of the planet or object and the distance from the center of the planet or object to the rocket. Without this information, we cannot provide a specific answer. However, we can say that the escape velocity of the lighter 2000N rocket is lower than the escape velocity of the heavier 4000N rocket.
To learn more about escape velocity https://brainly.com/question/29911258
#SPJ11
Two stars with identical diameters are the same distance away. One has a temperature of 16800 ºK, the other has a temperature of 4200 ºK. How much brighter is the hotter star? (Use Stephan-Boltzmann law) Brightness = F = σ T4
a. 32 times
b. 64 times
c. 26 times
d. 60 times
The correct answer is (b) 64 times.
The Stefan-Boltzmann law relates the luminosity of a star (F) to its surface temperature (T) and radius (R) by the equation:
F = σT^4A
where σ is the Stefan-Boltzmann constant (5.67 x 10^-8 W/m^2 K^4) and A is the surface area of the star.
Assuming that the two stars have the same radius, we can calculate the ratio of their luminosities (and therefore their brightness) as:
F_hot / F_cool = (σ T_hot^4 A) / (σ T_cool^4 A)
= (T_hot / T_cool)^4
= (16800 K / 4200 K)^4
= 16^4
= 65536
Therefore, the hotter star is 65536 / 1 = 65536 times brighter than the cooler star.
The closest answer choice is b. 64 times, which is the result of rounding the actual answer. So, the correct answer is (b) 64 times.
To learn more about rounding visit:
https://brainly.com/question/15265892
#SPJ11
T/F The mass of a body has a bigger effect on the moment of inertia than the location of the center of mass of that body
The statement "The mass of a body has a bigger effect on the moment of inertia than the location of the center of mass of that body" is generally true.
The moment of inertia (I) is a measure of an object's resistance to rotational motion about an axis. It depends on both the mass of the object and its distribution relative to the axis of rotation. The formula for the moment of inertia is given by:
I = Σ mi * ri^2
where mi is the mass of each particle in the object and ri is the distance of each particle from the axis of rotation.
From this formula, we can see that the mass of the body (mi) has a direct influence on the moment of inertia. The greater the mass, the greater the moment of inertia.
On the other hand, the center of mass is the point at which an object's mass can be considered to be concentrated. The location of the center of mass does not directly affect the moment of inertia; rather, it is the distribution of the mass around the axis of rotation that matters. Therefore, changing the location of the center of mass without changing the mass distribution would not have a significant impact on the moment of inertia.
In conclusion, the mass of a body generally has a bigger effect on the moment of inertia than the location of the center of mass of that body, as the mass directly contributes to the moment of inertia while the center of mass location does not.
To know more about moment of inertia, mass, and center of mass:
https://brainly.com/question/29840049
#SPJ11
A wave has a wavelength of 2 m and a frequency of 223Hz. How fast is it moving?
The wave is moving at a speed of 446 m/s.
The speed of a wave can be calculated using the formula:
v = λf
where v is the speed of the wave, λ is the wavelength, and f is the frequency.
In this case, the wavelength is 2 m and the frequency is 223 Hz. So, we can substitute these values into the formula:
v = 2 m × 223 Hz
The speed (v) of a wave is the distance it travels per unit time. It is usually measured in meters per second (m/s). Simplifying the expression, we get:
v = 446 m/s
Therefore, the speed of the wave is 446 m/s.
To know more about speed, here
brainly.com/question/28224010
#SPJ4
What is the main disadvantage of additive synthesis?
Additive synthesis is a sound synthesis technique that involves the combination of multiple sine waves to create complex sounds. The main disadvantage of additive synthesis is that it can be time-consuming and computationally expensive to generate complex sounds with a large number of harmonics.
This is because each harmonic must be individually specified and manipulated, which can require a lot of processing power. Another disadvantage of additive synthesis is that it can be difficult to create natural-sounding timbres, as the human ear is sensitive to subtle variations in the amplitude and phase relationships between harmonics.
It can also be challenging to control the spectral content of the resulting sound, as small changes in the amplitudes and frequencies of individual harmonics can have a significant impact on the overall sound.
Despite these challenges, additive synthesis remains a powerful tool for sound design and music production. With careful attention to detail and the use of specialized software and hardware, it is possible to create complex and expressive sounds using additive synthesis techniques.
You can learn more about sine waves at: brainly.com/question/28517936
#SPJ11
Describe two different ways that crumple zones lessen the force felt by the passenger during a crash?
A 5.0-kg mass is suspended by a string from the ceiling of an elevator that is moving upward with a speed which is decreasing at a constant rate of 2.0 m/s in each second. What is the tension in the string supporting the mass?
1) 49 N
2) 39 N
3) 59 N
4) 10 N
5) 42 N
The tension in the string supporting the mass is approximately 49 N (option 1).
To solve this problem, we need to consider the forces acting on the object and apply Newton's second law of motion.
The forces acting on the object are the tension force T from the string and the force of gravity mg, where m is the mass of the object and g is the acceleration due to gravity.
When the elevator is accelerating downward, the apparent weight of the object will decrease, but when it is accelerating upward, the apparent weight will increase. In this case, the elevator is moving upward with a decreasing speed, so the apparent weight of the object will increase.
Using Newton's second law, we can write:
ΣF = ma
where ΣF is the sum of the forces acting on the object, m is the mass of the object, and a is the acceleration of the object.
In the vertical direction, the only forces acting on the object are the tension force T and the force of gravity mg. The net force in the vertical direction is therefore:
ΣFy = T - mg
Since the object is not moving vertically, the acceleration in the vertical direction is zero:
ΣFy = 0
Therefore, we have:
T - mg = 0
T = mg
Substituting m = 5.0 kg and g = 9.81 m/s^2, we get:
T = (5.0 kg)(9.81 m/s^2) = 49.05 N
Therefore, the tension in the string supporting the mass is approximately 49 N (option 1).
To learn more about approximately visit:
https://brainly.com/question/29669607
#SPJ11
