Write the formula and calculate the molecular mass of
1) Soda ash
2) Baking Soda
3) Lime Stone
4) Ethanol
5) Common Salt

Rutherford model task 1 is not supported by Thomson’s experimental evidence.

The atom consists of matter that may be split without releasing electrical charges.

It's also the smallest unit of matter with chemical element features. As a result, the atom is the fundamental unit of science.

The nuclear model of the atom was initially put out by Rutherford. His atomic model states that the majority of an atom's volume is empty,

The nucleus, which contains protons and neutrons, is located in the middle of the atom, and its electrons orbit the nucleus in well-defined paths.

If we discuss the research of some other scientists, like Dalton, Neil Bohr, and JJ Thomson, they are all mostly consistent with Rutherford's findings.

For instance, Dalton's atomic theory presupposed that all atoms are roughly the same size and that atoms interact to generate compounds.

According to Rutherford's theory, atoms have a fixed number of electrons that can be shared to create compounds.

The Bohr model, which posits that electrons orbit the nucleus in certain shells, is also consistent with Rutherford's findings, which gave rise to the idea of shells.

If we discuss Thomson's Plum Pudding Model, it describes atoms as negatively charged particles around a soup of positively charged ions. This is also consistent with Rutherford's findings, which show that positive nuclei are surrounded by negative electrons.

Although Rutherford's model was the greatest atomic model, it nevertheless drew on several earlier investigations and was therefore consistent with the outcomes of earlier models.

Hence rutherford model task 1 is not supported by Thomson’s experimental evidence.

To learn more about the atom refer to the link;

https://brainly.com/question/1566330

#SPJ1

Answer:

(b)  19.9 moles

Explanation:

To convert from moles Al to moles O₂, you need to multiply the given value by the mole-to-mole ratio of each component. This ratio is constructed via the coefficients in the balanced reaction. The desired unit (moles O₂) should be placed in the numerator to allow for the cancellation of units.

2 Al₂O₃ ----> 4 Al + 3 O₂
                    ^         ^            

26.5 moles Al           3 moles O₂
---------------------  x  ----------------------  =  19.9 moles O₂
                                 4 moles Al

Answer: The pH of the solution is 5.65

Explanation:

The relationship between the pH and the pOH is that [tex]pH+pOH=14[/tex].

Given this, we can plug in the pOH and subtract that from 14.

[tex]14-pOH=pH\\14-8.35=5.65[/tex]

I hope this helped! Pls give brainliest!! :)

Answer:

Give the man above me brainliest

Specialized periodicals in which scientists publish the results of their works are called scientific journals.

In educational publishing, a scientific journal is a periodical book intended to similarly the progress of technology, typically by way of reporting new studies.

Journal articles may include original research, re-analyses of studies, opinions of literature in a selected place, proposals of new but untested theories, or opinion pieces.

These scientific journals include the following.

Learn more about scientific journals here https://brainly.com/question/14443228

#SPJ10

The temperature is always the same.

Assume we have something in solid phase. As we increase the temperature, the particles on the solid increase their kinetic energy, thus, the particles move more.

This causes that the volume of the object increases (for example when we heat up a metal and it dilates) and this keeps happening until we reach a critical point, when we are near a change of phase.

At this point the energy given is not used to increase the temperature of the object, but is used to "break" bonds in such a way that the particles are more free than before.

When all these bonds are "broken" the change of phase is completed, and in the case of the solid, we go from solid phase to liquid phase.

So, the temperature is always the same at the beginning of a change of state compare with the temperature at the end of the change

If you want to learn more about this read here ;

brainly.com/question/11804615

#SPJ1

The statement "According to Le Châtelier's principle, an increase in temperature will shift the equilibrium position toward the products in an endothermic reaction" is definitely true.

Le Châtelier's principle may be defined as transformations in the temperature, pressure, volume, or concentration of a system that will lead to observable and conflicting changes in the strategy in order to accomplish a refreshed equilibrium state.

According to Le Châtelier's principle, an increase in temperature generates the equilibrium to move in the direction of the product of the endothermic reaction, and the decrease in the temperature rationales the equilibrium to move in the direction of the product of the exothermic reaction.

Therefore, it is well described above.

To learn more about Le Châtelier's principle, refer to the link:

https://brainly.com/question/2943338

#SPJ1

Answer:

5.0 mol

Explanation:

From the coefficients of the equation, we know that for every 2 moles of Mn consumed, 2 moles of MnO are produced.

Thus, the number of moles of Mn consumed is equal to the number of moles of MnO produced, and thus the answer is 5.0 mol.

The moles of MnO formed with the reaction of 5 moles of Mn is 3 moles.

In a chemical reaction, the reagent that is present in a lesser quantity and governs the rate of the reaction is termed as the limiting reagent.

In the reaction of the formation of MnO, according to the stoichiometric law 2 moles of Mn reacts with 1 moles of Oxygen.

Thus, the moles of oxygen consumed by 7 moles of Mn is:

2 moles Mn = 1 mole O₂

7 moles Mn = 3.5 moles O₂

The available moles of O₂ = 5 mol.

The remaining moles of O₂ = 5-3.5 moles

The remaining moles of O₂ = 1.5 moles

The reaction of 5 moles Mn requires 2.5 moles of O₂, whereas the available moles of oxygen is 1.5 moles. Thus, oxygen serves as the limiting reagent.

The moles of MnO formed with the reaction of 5 moles Mn and 1.5 moles O₂

1 mole O₂ = 2 moles MnO

1.5 moles O₂ = 2 * 1.5 moles MnO

1.5 moles O₂ = 3 moles MnO

Thus, the moles of MnO formed with the reaction of 5 moles of Mn with the available oxygen is 3 moles.

Learn more about stoichiometric law, here:

https://brainly.com/question/14465605

#SPJ1

Explanation:

There is an electrostatic force holding the electrovalent bonds together and they're usually structured, whereas in covalent, they are usually free and are only held together by a very weak intermolecular force

Answer:

12 seconds

Explanation:

Time taken by 50cm³ of oxygen to diffuse from pinhole

= 1 minute = 60 seconds

⠀

⠀

[tex] \textsf{ Rate of oxygen} \sf (O_2) = \frac{50}{60} [/tex]

⠀

⠀

⠀

Let time taken by 50cm³ of hydrogen to diffuse from pinhole = t seconds

⠀

⠀

[tex] \textsf {Rate of hydrogen } \sf(H_2) = \frac{50}{t} [/tex]

⠀

⠀

⠀

According to the formula

[tex] \sf \frac{Rate \: of \: hydrogen(H_2)}{Rate \: of \: oxygen(O_2) } = \sqrt{ \frac{Molar \: mass \: of \: O_2}{Molar \: mass \: of \: H_2} } [/tex]

⠀

⠀

[tex] \large \sf \frac{50}{t} \div \frac{50}{60} = \sqrt{ \frac{\cancel{32}\small 16}{\cancel2} } \\ \\ \sf \large \frac{ \cancel{50}}{t} \times \frac{60}{ \cancel{50}} = \sqrt{16} \\ \\ \sf \large \frac{60}{t} = 4 \\ \\ \sf \large \frac{ \cancel{60} \: \small12}{ \cancel4} = t \\ \\ \large \underline{ \boxed{ \tt t = 12 \: seconds}}[/tex]

⠀

⠀

⠀

⠀

⠀

[tex](40.0)(7.426)=\boxed{297.0 \text{ g (to 4 sf)}}[/tex]

Answer:

31536000

Explanation:

There are 31536000 seconds in a day.

60s x 60min x 24hrs x 365 days = 31536000sec

The missing components of the neutralisation reaction include the following:

Neutralisation reaction is defined as the type of reaction that leads to the formation of salt and water when an acid and a base reacts.

From the reactions given the missing components are replaced as follows:

Learn more about acids here:

https://brainly.com/question/26353151

#SPJ1

Answer:

Adding sugar to water will raise the boiling point and decrease the freezing point of water.

Explanation:

Hope this helps!

If same amount of sugar  added  to the same amount of water and boiled it then boiling point increases.

When sugar added to water it become solution.

Example: If water boils at 100°C then solution with 80%  sugar in 20% of water boils at 112°C.

Since, sugar is non-volatile solute. So, when we boil the solution of sugar in water then water boils easily in low temperature but more  high temperature is required to boil sugar.

The solute which has higher vapor pressure as compare to solution in which it dissolve is called non-volatile solute.

To learn more about non-volatile solute here.

https://brainly.com/question/14114576

#SPJ2

The partial pressure of xenon is 571.5 KPa if the total pressure is 1436.4kPa.

The pressure exerted by a (specified) component in a mixture of gases.

According to Dalton's law of partial pressure, the net pressure of a gaseous mixture is always equal to the sum of the partial pressures of individual gases.

Now we are given that the total pressure is 1436.4kPa

The partial pressure of helium is 348.1kPa

The partial pressure of oxygen is 516.8kPa

Partial Pressure of xenon?

Using dalton's law;

1436.4kPa = 348.1kPa + 516.8kPa + partial pressure of xenon

The partial pressure of xenon is 571.5 KPa.

Learn more about the partial pressure here:

https://brainly.com/question/15075781

#SPJ1

The 18o-labeled methanol (CH3O*H) will appear in the products side at position b.

The 18O label will appear at position b in the product as indicated in the image.

This methoxy group in the product formed in position b comes from the 18O-labeled methanol (CH3OH).

While the oxygens at positions a and c in the product come from the unlabeled hemiacetal.

Thus, the 18o-labeled methanol (CH3O*H) will appear in the products side at position b.

Learn more about methanol here: https://brainly.com/question/17048792
#SPJ11

Al₂(SO₄)₃

= 2.Al+3.S+12.O

= 2.27 + 3.32+12.16

= 54+96+192

=342 g/mol

A thermodynamically-controlled process describes a reaction that the most stable or more stable of two products is formed.

A  thermodynamically-controlled process is a reaction in which the ratio of the product formed is determined by the relative stability of the products.

Thermodynamic control ensures that the most stable or more stable of two products is formed.

Therefore, a thermodynamically-controlled process describes a reaction that the most stable or more stable of two products is formed.

Learn more about thermodynamic control at: https://brainly.com/question/3226985

#SPJ11

Answer:

C

Explanation:

with combustion you must know that your products must be carbon dioxide and water. I think you copied your question incorrectly.

Answer:

=> 119.4597 g

Explanation:

From our question, we have been provided with the molarity of the resultant solution.

We know that, molarity of a solution is contained in 1 L or 1000 cm³ of solution.

Hence we have 1.50 moles in 1000 cm³.

Also, we know that, 1 cm³ equivalent to 1 g for water.

Thus, from our question we have 995 cm³ of water.

Lets now solve our problem;

1.5 moles are contained in 1000 cm³

x moles are contained in 995 cm³

Cross multiply

[tex]x \: moles \: = \frac{(995 {cm}^{3} \times 1.5 \: moles )}{(1000 {cm}^{3} )} \\ = \frac{1492.5 \: moles}{1000} \\ = 1.4925 \: moles[/tex]

1.4925 moles of NH4NO3 are required to be dissolved in water.

To find the mass of solute (NH4NO3) we use the formula;

Mass = RFM (Relative Formula Mass) x Number of moles

[tex] = 80.04 \: \frac{g}{mol} \times1.4925 \: mol \\ = 119.4597 \: g [/tex]

Therefore the mass of NH4NO3 needed to be dissolved in 995 g of water is 119.4597 g

Answer:

119.4597

Explanation:

Acellus

Depends on what kind of ions are present in the green solution

Explanation:

Cr3+, a famous green ion can obviously be displayed by a Cu2+ ion

https://brainly.in/question/47911070

Answer:D

Explanation:

A single-replacement reaction occurs when one element replace another in a single compound.

B. One reactant replaces an element in another reactant.

Chemical reactions occur when reactants bond or break apart to form new substances known as the products.

Types of Reactions

There are a few main types of reactions:

All of these are different ways chemical reactions can occur.

Synthesis

Synthesis occurs when two different reactants form one product. This would be a match for answer choice A.

Decomposition

Decomposition occurs when one reactant breaks down, usually through heat, to form 2 different products, which matches answer choice D.

Single Replacement

Single replacement occurs when there are 2 reactants, a substance and an element, and the singular elements replaces one of the elements in the substance to form new products. Since this matches answer choice B, this is the correct answer.

Double Replacement

Finally, double replacement is when there are 2 reactants and each switches an element with the other. This is seen in answer choice C.

For this example remember that [tex]NO_{3}[/tex] is a polyatomic ion and acts as a singular element.

Heating up a reaction increases the speed of a reaction until the enzyme denatures.

Enzyme denaturation occurs when a biological protein catalyst does not work anymore due to a high temperature that alters its tridimensional conformation.

This cellular process (denaturation) is well known to be one of the main causes of enzymatic failure.

In conclusion, heating up a reaction increases the speed of a reaction until the enzyme denatures.

Learn more about enzymes here:

https://brainly.com/question/1596855

#SPJ12

Answer:

a.  V=44.9mL

Explanation:

For a gas undergoing all of these changes, it will be important to combine Boyle's Law and Charles' Law to form the following equation (if it isn't already known):

[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}[/tex]

Where the Temperatures must be measured in Kelvin.

Recall that to convert Celsius to Kelvin, one must add 273 or use the equation [tex]T_C+273=T_K[/tex].

Thus, [tex]T_1=(18.1+273)[K]=291.1[K][/tex]  and [tex]T_2=(12.5+273)[K]=285.5[K][/tex]

To solve for the requested quantity, note that all of the other units match between beginning and end, so we substitute and solve:

[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}[/tex]

[tex]\dfrac{(2.61[atm])V_1}{(291.1[K])}=\dfrac{(1.92[atm])(59.9[mL])}{(285.5[K])}[/tex]

[tex]\dfrac{(2.61[atm] \!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{-----})\bold{V_1}}{291.1[K] \!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{-----}}*\dfrac{291.1[K] \!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{-----}}{2.61[atm]\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{-----}}=\dfrac{(1.92[atm]\!\!\!\!\!\!\!\!\!\!\!{--})(59.9[mL])}{285.5[K\!\!\!\!\!{-}]}*\dfrac{291.1[K\!\!\!\!\!{-}]}{2.61[atm]\!\!\!\!\!\!\!\!\!\!\!{--}}[/tex]

[tex]V_1=44.928677576[mL][/tex]

Accounting for significant digits, [tex]V_1=44.9[mL][/tex]

Answer:

T₂ = 26.7 °C

Explanation:

Because you are dealing with pressure and temperature, you can use Gay-Lussac's Law to find the final answer. The equation looks like this:

P₁ / T₁ = P₂ / T₂

In this form, "P₁" and "T₁" represent the initial pressure and temperature. "P₂" and "T₂" represent the final pressure and temperature. You have been given the values for all of the variables but "T₂". Therefore, by plugging these values into the equation, you can simplify to find "T₂".

P₁ = 2.11 atm                   T₁ = 25 °C

P₂ = 2.25 atm                 T₂ = ?

P₁ / T₁ = P₂ / T₂                                            <--- Gay-Lussac's Law equation
(2.11 atm) / (25 °C) = (2.25 atm) / T₂           <--- Plug variables into equation

0.0844 = (2.25 atm) / T₂                            <--- Divide 2.11 by 25

(0.0844) x T₂ = 2.25 atm                           <--- Multiply both sides by T₂

T₂ = 26.7                                                    <--- Divide both sides by 0.0844

9.06 L  is the volume of 0.24 mol oxygen (02) gas at 345 k and a pressure of 0.75.

The ideal gas law (PV = nRT) relates to the macroscopic properties of ideal gases. An ideal gas is a gas in which the particles (a) do not attract or repel one another and (b) take up no space (have no volume).

We know that the ideal gas equation relates the pressure, volume, temperature, and moles of gases as:

PV =nRT

This is a combined gas law based on other gas law like Boyle's law, Charle's law, Avagadro's law, Gay Lussac's law

P =  pressure = 0.75 atm

V = volume = ?

n = moles = 0.24 mol

R = 0.0821 L atm / molK  [gas constant]

T = temperature = 345 K

Putting the values

Volume =[tex]\frac{nRT}{ P}[/tex]

Volume = 0.24 X 0.0821 X 345 / 0.75

= 9.06 L

Hence, 9.06 L is the volume of 0.24 mol oxygen (02) gas at 345 k and a pressure of 0.75.

Learn more about the ideal gas here:

https://brainly.com/question/27691721

#SPJ1

Calculate electrons

Total electrons=10+2=12

The element is Magnesium with symbol Mg as atomic no is 12

Additional:-

M:-

Excited state of magnesium

The Molar Concentration Of A =0.099 .

The Relative Molar Mass Of A = 35.0129 gm

Given,

Mass of HX = 3.5 g

Moles of solution B ([tex]Na_{2} CO_{3}[/tex]) = 0.05 moles

Volume of HX = 26.10 mL

Volume of Solution B = 25 mL

Molecular weight of solution B = 2(atomic weight of Na )+ atomic weight of C + 3(atomic weight of O)

                 = 2(23) + 12 + 3(16)

                 =106 gm

Equivalent weight of  [tex]Na_{2} CO_{3}[/tex] = molecular weight / 2 = 106 /2  =53 g

Mole = mass / molecular weight

∴0.05 = mass / 106

∴ mass = 5.3 gm [tex]Na_{2} CO_{3}[/tex]

Normality = mass ÷ (equivalent weight × volume of the solution in liter)

                = 5.3 ÷( 53 × 0.025)

                =4 N

So, by using formula ,

[tex]N_{1} V_{1} =N_{2} V_{2}[/tex]

[tex]N_{1}[/tex] = normality of solution B = 4 N

[tex]V_{1}[/tex] = volume of solution B = 25 mL

[tex]N_{2}[/tex] = normality of solution A = ? N

[tex]V_{2}[/tex] =Volume of solution A = 26.1 mL

∴ 4×25 = [tex]N_{2}[/tex] × 26.1

∴[tex]N_{2}[/tex] = 3.83 N

∴ normality of solution A = 3.83 N

from Formula of the normality we can find the equivalent weight of the A

Normality = mass of HX ÷ (equivalent weight × volume of the solution in liter)

3.83 = 3.5 ÷( equivalent weight × 0.0261)

∴equivalent weight = 35.0129 g

In case of HX the electron transfer is 1 ,so equivalent weight = molecular weight ; which is also termed as relative molar mass in given case.

∴The Relative Molar Mass Of A = 35.0129 g

Molar concentration = mass / molar mass

                               = 3.5 / 35.0129

                               = 0.099 mole

∴ The Molar Concentration of A  is 0.099 .

Learn more about Normality here...

https://brainly.com/question/1685497

#SPJ10