WILL GIVE BRAINLIEST TO BEST ANSWER - PLEASE HELP



1) List some creative ways for changing people’s perception of bugs as pests.



2) What negative environmental impacts could be associated with foraging for and farming bugs?



3) How could insect farming address some of the problems associated with food insecurity?



4) How could insect farming address some of the problems associated with food insecurity?

DNA analysis has revolutionized forensic science in the past few decades. It has become an indispensable tool for crime scene investigations, identifying suspects, and exonerating the innocent.

The history of DNA analysis dates back to 1984, when British geneticist Alec Jeffreys developed the technique of DNA fingerprinting. He used variable number tandem repeats (VNTRs) to create a unique DNA profile for each individual.

In 1986, DNA analysis was first used in a cri-minal case, where it was used to exonerate a man who had been wrongly convicted of ra-pe and mu-rder. Since then, DNA analysis has been used in several high-profile cases, such as the OJ Simpson trial in 1995 and the identification of 9/11 victims in 2001.

The technique of DNA fingerprinting evolved over the years, with the development of polymerase chain reaction (PCR) and short tandem repeats (STRs) in the 1990s. PCR enabled amplification of DNA samples, while STRs provided greater discrimination power in creating unique DNA profiles.

The first DNA database was established in the UK in 1995, followed by the US in 1998. Today, DNA databases are used worldwide for identifying suspects and matching DNA samples to cri-me scenes.

The latest advancements in DNA analysis include next-generation sequencing (NGS), which can analyze entire genomes, and mitochondrial DNA analysis, which can identify maternal lineage.

In conclusion, DNA analysis has come a long way since its inception in the 1980s. It has become an essential tool for forensic investigations and has contributed significantly to the justice system. The technique continues to evolve, and future advancements in DNA analysis will undoubtedly improve its effectiveness and accuracy.

To know more about DNA analysis, visit:

https://brainly.com/question/19340987#

#SPJ11

The formula for calculating the amount of energy required to raise the temperature of a substance is:

q = m * c * ΔT

where q is the amount of energy, m is the mass of the substance, c is the specific heat, and ΔT is the change in temperature.

We can rearrange this formula to solve for the mass of the metal:

m = q / (c * ΔT)

Substituting the given values, we get:

m = 832 J / (0.466 J/g*C * (71oC - 65oC))

m = 832 J / (0.466 J/g*C * 6oC)

m = 832 J / 2.796 J/g

m = 297.1387678 g

Rounding to five significant figures, the mass of the metal sample is 297.14 g.

To know more about substance refer here

https://brainly.com/question/13320535#

#SPJ11

(a) Osmolarity of 0.069 m na2co3 is 0.138 m, (b) osmolarity of 0.62 m ai(no3)3 is 1.86 m, (c) osmolarity of a 0.30 m glucose (c6h1206) aqueous solution is 0.30 m.

Osmolarity is a measure of the concentration of solutes in a solution. It is expressed as the number of osmoles (molecules or particles) of solutes per litre of solution. Osmolarity is an important factor in the body's ability to regulate the balance of water and electrolytes in the blood and other bodily fluids. It is also important for the absorption of nutrients from the intestines, and the maintenance of blood pressure. Osmolarity is measured using a special instrument called an osmometer.

To learn more about Osmolarity

https://brainly.com/question/14814464

#SPJ4

We need 0.4 L of the 0.5 M MgSO₄ stock solution to make 2.0 L of 0.20 M MgSO₄.

To calculate the volume of the 0.5 M MgSO₄ stock solution needed to make 2.0 L of 0.20 M MgSO₄, we will use the formula m₁v₁ = m₂v₂.

1. Identify the given values:
m₁ = 0.5 M (concentration of the stock solution)
m₂ = 0.20 M (concentration of the desired solution)
v₂= 2.0 L (volume of the desired solution)

2. Plug the given values into the formula:
(0.5 M)(v₁) = (0.20 M)(2.0 L)

3. Solve for v1 (volume of the stock solution needed):
v₁= (0.20 M)(2.0 L) / (0.5 M)
v₁= 0.4 L

So, you need 0.4 L of the 0.5 M MgSO₄ stock solution to make 2.0 L of 0.20 M MgSO₄.

To know more about stock solution :

https://brainly.com/question/27304546

#SPJ11

The molar mass of the unknown gas is approximately 221.6 g/mol.

To find the molar mass of the unknown gas, we can use the ideal gas law equation:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

First, we need to convert the given values to their appropriate units:

mass (m) = 205 g

volume (V) = 20.0 L

pressure (P) = 1.00 atm

temperature (T) = 273 K

Next, we can rearrange the ideal gas law equation to solve for the number of moles:

n = PV / RT

Substituting the given values, we get:

n = (1.00 atm) x (20.0 L) / [(0.08206 L atm/mol K) x (273 K)]

n = 0.926 mol

Now we can calculate the molar mass of the unknown gas by dividing its mass by the number of moles:

molar mass = mass / n

molar mass = 205 g / 0.926 mol

molar mass = 221.6 g/mol

To know more about molar mass refer to-

https://brainly.com/question/22997914

#SPJ11

The temperature of the balloon after increasing the pressure to 3.00 atm is 608 K.

First, we need to convert the initial pressure from torr to atm, which is 860.0 torr/760 torr/atm = 1.13 atm.

Using the combined gas law, we can solve for the new temperature:

(P₁x V₁)/T₁ = (P₂x V₂)/T₂

Where P₁ = 1.13 atm, V₁ is constant, T₁ = 20.0 + 273.15 K (convert from Celsius to Kelvin), P₂ = 3.00 atm, and we want to solve for T₂.

Substituting the values and solving for T₂:

Since V₁ and V₂ are equal (since it is the same balloon), we can simplify to:

Therefore, the temperature of the balloon after increasing the pressure to 3.00 atm is 608 K.

To learn more about temperature, here

https://brainly.com/question/11464844

#SPJ4

480 mL of the HCl solution with a pH of 1.3 can be neutralized by one dose of milk of magnesia assuming the concentration of magnesium hydroxide is 0.2 M.

To determine the volume of [tex]HCl[/tex] solution that can be neutralized by milk of magnesia, we need to know the concentration of the milk of magnesia.

Assuming milk of magnesia is a suspension of solid magnesium hydroxide in water, we need to know the concentration of magnesium hydroxide [tex](Mg(OH)2)[/tex] in the suspension.

Let's assume that the concentration of magnesium hydroxide in milk of magnesia is 0.2 M.

The balanced chemical equation for the neutralization reaction between [tex]HCl[/tex] and[tex]Mg(OH)2[/tex]is:

[tex]2HCl + Mg(OH)2 - > MgCl2 + 2H2O[/tex]

From the equation, we can see that two moles of [tex]HCl[/tex] react with one mole of [tex]Mg(OH)2[/tex].

To determine the volume of [tex]HCl[/tex] solution, we need to calculate the number of moles of [tex]Mg(OH)2[/tex] in one dose of milk of magnesia:

0.2 M = 0.2 moles / liter

Let's assume one dose of milk of magnesia is 30 mL, or 0.03 L. Then the number of moles of [tex]Mg(OH)2[/tex] in one dose is:

0.2 moles / L x 0.03 L = 0.006 moles Mg(OH)2

Therefore, this amount of [tex]Mg(OH)2[/tex] would require:

2 x 0.006 = 0.012 moles of [tex]HCl[/tex] for complete neutralization

Now, let's calculate the volume of [tex]HCl[/tex] solution needed to provide 0.012 moles of [tex]HCl[/tex].

The volume of [tex]HCl[/tex] solution can be calculated using the balanced chemical equation and the molarity of the [tex]HCl[/tex] solution:

2 moles HCl / 1 mole [tex]Mg(OH)2[/tex] x 0.012 moles [tex]Mg(OH)2[/tex] / 1 = 0.024 moles HCl

[tex]pH = -log[H+]1.3 = -log[H+]\\[H+] = 5 x 10^-2 M[/tex]

Now we can calculate the volume of the HCl solution using the equation:

moles = concentration x volume

0.024 moles = [tex]5 x 10^-2 M x volume[/tex]

volume = 0.48 L or 480 mL

To know more about  milk of magnesia refer to-

https://brainly.com/question/22066653

#SPJ11

The sample transferred 1,518.7 calories of heat.

First, we need to calculate the heat absorbed or released by the sample using the formula:

q = m * c * ∆T

where q is the heat transferred, m is the mass of the sample, c is the specific heat capacity of antimony, and ∆T is the temperature change.

Plugging in the values, we get:

q = 983.6 g * 0.049 cal/(g·°C) * 31.51 °C

q = 1,518.7 cal

Therefore, the sample transferred 1,518.7 calories of heat.

To know more about heat transfer refer here:

https://brainly.com/question/31065010

#SPJ11

The mass (in grams) of oxygen are needed to produce 16.7 g of sulfur trioxide, SO₃ is 3.34 grams

First, we shall determine the mole of sulfur trioxide, SO₃ produced. Details below:

Mole = mass / molar mass

Mole of sulfur trioxide, SO₃ = 16.7 / 80

Mole of sulfur trioxide, SO₃ = 0.209 mole

Next, we shall determine the mole of oxygen needed. Details below:

2SO₂ + O₂ -> 2SO₃

From the balanced equation above,

2 mole of SO₃ was produced from 1 moles of O₂

Therefore,

0.209 mole of SO₃ will be produce from = 0.209 / 2 = 0.1045 mole of O₂

Finally, we shall detemine the mass of oxygen, O₂ needed. Details below:

Mole = mass / molar mass

0.1045 = Mass of O₂ / 32

Cross multiply

Mass of O₂ = 0.0888 × 32

Mass of O₂ = 0.178 grams

Thus, that the mass of oxygen, O₂ needed is 3.34 grams

Learn more about mass:

https://brainly.com/question/21940152

#SPJ1

One possible process to separate nickel tetracarbonyl and iron pentacarbonyl is fractional distillation. Since the boiling points of the two liquids are different, the process can take advantage of this difference to separate the components.

Fractional distillation works by heating the mixture in a distillation apparatus, which causes the liquids to vaporize. The vapor is then condensed back into a liquid and collected. However, the composition of the vapor is not uniform, with more volatile components having a higher concentration.

By using a fractionating column, which contains many plates or packing material, the vapor is forced to condense and evaporate multiple times.

As the vapor travels up the column, the components with lower boiling points will vaporize and travel up more easily, while the components with higher boiling points will condense and fall back down more frequently. This process effectively separates the components based on their boiling points.

In the case of nickel tetracarbonyl and iron pentacarbonyl, the fractional distillation apparatus would be set up, and the mixture would be heated. As the vapor rises up the column, the nickel tetracarbonyl, with its lower boiling point, would vaporize and travel up the column more easily, while the iron pentacarbonyl would condense and fall back down more frequently.

The components can then be collected separately at the end of the apparatus, resulting in the separation of the two liquids.

To know more about fractional distillation refer to-

https://brainly.com/question/29037176

#SPJ11

The total pressure inside the container is 4.00 atm. This is because the total pressure of a gas mixture is equal to the sum of the individual pressures of each gas present. In this case, we have 2.50 atm of N2 gas and 1.50 atm of O2 gas.

When these two values are added together, we get the total pressure of 4.00 atm. This total pressure is also known as the partial pressure of the gas mixture.

The partial pressure of the gas mixture is the sum of the individual partial pressures of each gas present. Since the total pressure of a gas mixture is equal to the sum of the individual pressures of each gas present, the total pressure in the container is 4.00 atm.

Know more about Total pressure here

https://brainly.com/question/30255561#

#SPJ11

The molarity of the NaOH solution is 1.2 M.

To calculate the molarity of the NaOH solution, first determine the moles of H₂SO₄, then determine the moles of NaOH needed for neutralization, and finally, calculate the molarity of NaOH. Here's a step-by-step explanation:

1. Calculate moles of H₂SO₄: Moles = Molarity × Volume = 1.5 M × 0.040 L = 0.060 moles H₂SO₄

2. Determine moles of NaOH needed for neutralization:

The balanced equation for the reaction is H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂O. Based on the stoichiometry, 1 mole of H₂SO₄ reacts with 2 moles of NaOH, so 0.060 moles H₂SO₄ × 2 = 0.120 moles NaOH needed.

3. Calculate molarity of NaOH: Molarity = Moles / Volume = 0.120 moles NaOH / 0.025 L = 1.2 M NaOH solution.

To know more about balanced equation click on below link:

https://brainly.com/question/7181548#

#SPJ11

1) The reason why other big molecules, such as complex carbohydrates, don't usually come out in the feces of healthy people is because they are broken down into smaller, absorbable units during the digestive process.

If big molecules can't get absorbed in the small intestine, why aren't there other big molecules besides fiber, like complex carbohydrates, coming out in the poop of healthy people:

Complex carbohydrates are broken down into simple sugars like glucose through the action of enzymes such as amylase, which is present in saliva and pancreatic secretions. These simple sugars can then be absorbed by the small intestine and used by the body for energy. In contrast, fiber cannot be broken down by human digestive enzymes, so it remains undigested and is eliminated in the feces.

2) What's happening to the other big molecules like complex carbohydrates? How can we explain why the amount of complex carbohydrates could be decreasing as food travels through the digestive system?

As food travels through the digestive system, complex carbohydrates are gradually broken down into smaller, absorbable units. This process begins in the mouth with the action of salivary amylase, which starts breaking down the complex carbohydrates into smaller units. As the food continues to the stomach and then to the small intestine, more enzymes, like pancreatic amylase, are secreted to further break down the complex carbohydrates into simple sugars. These simple sugars are then absorbed by the small intestine and enter the bloodstream, where they can be used for energy or stored for later use. This is why the amount of complex carbohydrates decreases as food travels through the digestive system.

To know more about digestive system:

https://brainly.com/question/29694477

#SPJ11

You should use about 25.51 mL of concentrated H3PO4 to prepare 125 mL of a 3.00 M H3PO4 solution.

To prepare 125 mL of a 3.00 M H3PO4 solution using concentrated H3PO4 (14.7 M), you can use the dilution formula:

M1 × V1 = M2 × V2

Where M1 is the initial molarity (14.7 M), V1 is the volume of the concentrated solution needed, M2 is the final molarity (3.00 M), and V2 is the final volume (125 mL).

Rearrange the formula to solve for V1:

V1 = (M2 × V2) / M1

V1 = (3.00 M × 125 mL) / 14.7 M

V1 ≈ 25.51 mL

Therefore, you should use approximately 25.51 mL of concentrated H3PO4 to prepare 125 mL of a 3.00 M H3PO4 solution.

To learn more about molarity, refer below:

https://brainly.com/question/8732513

#SPJ11

The complete reaction of 0.551 grams of nitric oxide gas would produce 0.846 grams of nitrogen dioxide.

The given chemical equation shows that 2 moles of nitric oxide (NO) gas reacts with 1 mole of oxygen (O2) gas to produce 2 moles of nitrogen dioxide (NO2). Therefore, the stoichiometric ratio of NO to NO2 is 2:2 or 1:1. This means that for every 1 mole of NO gas, 1 mole of NO2 gas is produced.

To determine the mass of NO2 produced from 0.551 grams of NO gas, we need to first convert the mass of NO into moles using its molar mass. The molar mass of NO is 30.01 g/mol (14.01 g/mol for N and 16.00 g/mol for O).

0.551 g of NO is equivalent to 0.551 g / 30.01 g/mol = 0.0184 moles of NO.

Since the stoichiometric ratio of NO to NO2 is 1:1, the number of moles of NO2 produced will also be 0.0184 moles.

The molar mass of NO2 is 46.01 g/mol (14.01 g/mol for N and 2 x 16.00 g/mol for 2 O atoms).

Therefore, the mass of NO2 produced will be:

0.0184 moles x 46.01 g/mol = 0.846 grams.

Hence, the complete reaction of 0.551 grams of nitric oxide gas would produce 0.846 grams of nitrogen dioxide.

To know more about nitric oxide, visit:

https://brainly.com/question/31737620#

#SPJ11

A teaspoon of salt has more particles (approximately 6.20 x 10^22) than a teaspoon of sugar (approximately 7.41 x 10^21).

To compare the number of particles in a teaspoon of salt and a teaspoon of sugar, we need to understand the concept of moles.

A mole is a unit of measurement used to express the amount of a substance, and it corresponds to approximately 6.022 x 10^23 particles.

The number of moles in a given mass of a substance can be calculated using the formula:

moles = mass / molar mass.

The molar mass of common table salt (NaCl) is 58.44 g/mol, while the molar mass of table sugar (C12H22O11) is 342.3 g/mol.

Considering that a teaspoon of salt typically weighs about 6 grams and a teaspoon of sugar weighs about 4.2 grams, we can calculate the moles of each substance:

Moles of salt = 6 g / 58.44 g/mol ≈ 0.103 moles
Moles of sugar = 4.2 g / 342.3 g/mol ≈ 0.0123 moles

Now, to find the number of particles in each substance, we multiply the moles by Avogadro's number (6.022 x 10^23 particles/mol):

Particles of salt = 0.103 moles x 6.022 x 10^23 particles/mol ≈ 6.20 x 10^22 particles
Particles of sugar = 0.0123 moles x 6.022 x 10^23 particles/mol ≈ 7.41 x 10^21 particles

to know more about Avogadro's number refer here:

https://brainly.com/question/28812626#

#SPJ11

The initial temperature of the water is 25.8 °C. As a result, the lead ball loses heat rapidly when it is placed in the water bath, causing the water temperature to increase significantly.

What is  Temperature?

Temperature is a measure of the average kinetic energy of the particles in a substance. It is a physical quantity that describes how hot or cold an object is. Temperature is usually measured using a thermometer and is commonly expressed in units such as degrees Celsius (°C), Fahrenheit (°F), or Kelvin (K).

The energy gained by the water can also be calculated using the formula:

Q = mcΔT

where Q is the energy gained (in joules), m is the mass of the water (in grams), c is the specific heat capacity of water (in J/g°C), and ΔT is the change in temperature of the water (in °C).

We can calculate Q as follows:

Q = (500.0 g)(4.184 J/g°C)(35°C - T)

where T is the initial temperature of the water.

Since the energy lost by the lead ball is equal to the energy gained by the water, we can set these two equations equal to each other and solve for T:

(20.0 g)(0.13 J/g°C)(705°C - T) = (500.0 g)(4.184 J/g°C)(35°C - T)

Simplifying and solving for T gives:

T = 25.8°C

Therefore, the initial temperature of the water is 25.8 °C.

To know more about Temperature, visit;

https://brainly.com/question/26866637

#SPJ4

The total quantity of heat evolved when 10.0 g of steam at 200°C is condensed, cooled, and frozen to ice at 50°C is 410.56 kJ.

To calculate the total quantity of heat evolved, we need to break down the process into different steps:

Step 1: Condensation of 10.0 g of steam at 200°C

The heat evolved during condensation can be calculated using the formula:

q = m × ΔHvap

where q is the heat evolved, m is the mass of steam, and ΔHvap is the molar heat of vaporization of water, which is 40.7 kJ/mol.

First, we need to calculate the moles of steam:

n = m/M

where M is the molar mass of water, which is 18.02 g/mol.

n = 10.0 g / 18.02 g/mol = 0.555 mol

Now we can calculate the heat evolved during condensation:

q1 = n × ΔHvap = 0.555 mol × 40.7 kJ/mol = 22.5 kJ

Step 2: Cooling of liquid water from 100°C to 0°C

The heat evolved during cooling can be calculated using the formula:

q = m × c × ΔT

where q is the heat evolved, m is the mass of water, c is the specific heat capacity of water, and ΔT is the change in temperature.

We need to calculate the mass of water formed from the condensation of 10.0 g of steam. Since the density of water is 1 g/mL, we know that:

m_water = m_ice = V × ρ = 10.0 g/mL × 0.92 g/mL = 9.2 g

Now we can calculate the heat evolved during cooling:

q2 = 9.2 g × 4.18 J/g°C × (100 - 0)°C = 385 kJ

Step 3: Freezing of liquid water from 0°C to -50°C

The heat evolved during freezing can be calculated using the formula:

q = m × ΔHfus

where q is the heat evolved, m is the mass of water, and ΔHfus is the molar heat of fusion of water, which is 6.01 kJ/mol.

We need to calculate the moles of water:

n = m/M = 9.2 g / 18.02 g/mol = 0.510 mol

Now we can calculate the heat evolved during freezing:

q3 = n × ΔHfus = 0.510 mol × 6.01 kJ/mol = 3.06 kJ

Total heat evolved = q1 + q2 + q3 = 22.5 kJ + 385 kJ + 3.06 kJ = 410.56 kJ

To know more about heat evolved refer to-

https://brainly.com/question/31321782

#SPJ11

The pressure inside the car will be approximately 1.16 atm after the temperature increase.

In the solution to this question, we can assume that the temperature increase is isobaric (constant pressure), so we can use the ideal gas law to calculate the final pressure of the car:

PV=nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

We know that the amount of gas in the car will remain constant, so we can write:

[tex]P_1V = nRT_1[/tex]

and

[tex]P_2V = nRT_2[/tex]

where [tex]P_1[/tex] and [tex]T_1[/tex] are the initial pressure and the temperature, whereas [tex]P_2[/tex] and [tex]T_2[/tex] are the final pressure and temperature of the car.

We are given that [tex]P_1[/tex]=1 atm, [tex]T_1[/tex]=293 K, and [tex]T_2[/tex] = 338 K. We need to find the pressure [tex]P_2[/tex]:

We can say that [tex]P_2 = (P_1 T_2/ T_1)[/tex];

= (1 atm)(338 K/293 K)

= 1.16 atm

So, the pressure inside the car will be approximately 1.16 atm after the temperature increase.

Learn more about Ideal Gas law at:

https://brainly.com/question/25290815

#SPJ1

The pressure of the [tex]Co_{2}[/tex]  gas in the 12.2 L vessel at a temperature of 42°C with 1.13 mol of CO2 is 2.12 atm.

The volume of the vessel =  12.2 L

Number of moles of [tex]Co_{2}[/tex] =  1. 13 mol

Temperature = 42 degrees

To calculate the pressure of the gas we need to use the ideal gas law equation.

PV = nRT

P = nRT/V

Assuming that the Universal gas constant R =  0.0821 L·atm/(mol·K).

Converting the temperature degrees into Kelvin scale

T = 42°C + 273.15 = 315.15 K

Substituting the above values into the equation:

P = [(1.13 mol) * (0.0821 L·atm/mol·K)* (315.15 K)] / (12.2 L) = 2.12 atm

Therefore, we can conclude that the pressure of the gas is 2.12 atm.

To learn more about Pressure

https://brainly.com/question/25764275

#SPJ4

The complete question is:

What is the pressure required in a 12. 2 L vessel that contains 1. 13 mol of Co2 at a temperature of 42 degrees C?

The volume (in liters) of NO₂ at STP that can be produced when 25 g of Cu react with concentrated nitric acid, HNO₃ is 17.6 liters

First, we shall determine the mole in 25 g of Cu. Details below:

Mole = mass / molar mass

Mole of Cu = 25 / 63.55

Mole of Cu = 0.393 mole

Next, we shall determine the mole of of NO₂ produced from the reaction. Details below:

Cu + 4HNO3 -> Cu(NO₃)₂ + 2NO₂ + 2H₂O

From the balanced equation above,

1 mole of Cu reacted to produced 2 moles of NO₂

Therefore,

0.393 mole of Si will react to produce = 0.393 × 2 = 0.786 mole of NO₂

Finally, we shall obtain the volume of NO₂ produced at STP. Details below

At STP,

1 mole of NO₂ = 22.4 Liters

Therefore,

0.786 moles of NO₂ = 0.786 × 22.4

0.786 moles of NO₂ = 17.6 liters

Thus, we can conclude that the volume of NO₂ produced is 17.6 liters

Learn more about volume:

https://brainly.com/question/225322

#SPJ1

The particles that facilitate the electric conductivity of the following substances. The current is able to flow through the molten lead bromide.

(i) Sodium metal: Sodium is a metal and conducts electricity due to the presence of mobile electrons in it. These electrons are free to move around and allow electric current to flow through the metal.

(ii) Sodium Chloride solution: Sodium chloride solution is a conductive solution because it contains the ions of both sodium and chloride, which are capable of carrying electric current. The positive sodium ions move towards the negative end of the electric field, while the negative chloride ions move towards the positive end of the field.

(iii) Molten Lead Bromide: Molten lead bromide is also a conductor of electricity because it contains the ions of both lead and bromide. The positively charged lead ions are attracted to the negative end of the electric field, while the negatively charged bromide ions are attracted to the positive end of the electric field. As a result, the current is able to flow through the molten lead bromide.

Know more about electric current here

https://brainly.com/question/2264542#

#SPJ11

A container of helium is at 40°C with a volume of 2. 55 L. The temperature must be 280.81°C raised to for the volume to be 4. 50 L.

Using the combined gas law, we can find the temperature change needed to achieve a volume of 4.50 L:

(P1V1/T1) = (P2V2/T2)

At the start, P1 = P2 since the pressure is constant. So we can simplify the equation:

(V1/T1) = (V2/T2)

Plugging in the given values, we get:

(2.55 L)/(313.15 K) = (4.50 L)/T2

Solving for T2, we get:

T2 = (4.50 L x 313.15 K) / 2.55 L

T2 = 553.81 K

Converting to Celsius, we get:

T2 = 280.81°C

Therefore, the temperature must be raised to 280.81°C for the volume to be 4.50 L.

To know more about the helium refer here :

https://brainly.com/question/4945478#

#SPJ11

The given reaction HgO → Hg + O₂ is a decomposition reaction.

The balanced chemical reaction is  2HgO → 2Hg + O₂

A decomposition reaction is a type of reaction in which a particular compound or molecule dissociates or decomposes to form smaller constituent particles.

Combustion is the burning of any substance in presence of oxygen to give out carbon dioxide, water and heat.

In Synthesis reaction , new compounds are synthesized from different reactants.

Displacement reactions involve exchange of cations and anions from reactants to form different products.

To know more about decomposition here

https://brainly.com/question/14024847

#SPJ4

There are many pioneer species that can help break down and establish new ecosystems, but two common ones are lichens and mosses. These simple organisms are often the first to colonize barren or disturbed areas, paving the way for other, more complex species to follow.

Lichens are unique in that they are actually a symbiotic combination of two different organisms – a fungus and an algae or cyanobacterium. This partnership allows them to survive in a wide range of environments, including those with little or no soil. Lichens secrete acids that can dissolve rocks and other substrates, creating a thin layer of soil that other plants can use to establish themselves. Additionally, lichens can fix nitrogen from the air, providing a crucial nutrient for plant growth.

Mosses are another common pioneer species that can help break down and prepare new environments for other plants. Like lichens, they can grow in harsh conditions with little soil or nutrients. Mosses are able to absorb moisture and nutrients directly from the air, and can also trap sediment and organic matter, building up a layer of soil over time.

Additionally, mosses can store large amounts of water, which can be important for establishing other plants during dry periods.In summary, lichens and mosses are two pioneer species that can help break down and prepare new ecosystems for other plants. Through their unique adaptations and abilities, these simple organisms play a crucial role in establishing life in harsh or barren environments.

To know more about ecosystems refer here

https://brainly.com/question/13979184#

#SPJ11

The weight of water is converted to true volume because the volume of water can be affected by temperature, pressure, and dissolved impurities. The three corrections that are considered are thermal expansion correction, atmospheric pressure correction, and dissolved impurities correction.

The thermal expansion correction takes into account the fact that water expands or contracts with temperature changes. As the temperature of water increases, its volume increases, and vice versa. The correction factor is calculated based on the temperature of the water and the coefficient of thermal expansion of water.

The barometric or atmospheric pressure correction is applied because the pressure of the surrounding air can affect the volume of water. The correction factor is calculated based on the atmospheric pressure and the vapor pressure of water at the given temperature.

The dissolved impurities correction is applied because dissolved substances, such as salts or gases, can also affect the volume of water. The correction factor is calculated based on the concentration of dissolved substances in the water.

To know more about thermal expansion, refer here:

https://brainly.com/question/14092908#

#SPJ11

To form 1.4 mol of ammonia, you need 0.7 mol of nitrogen.

Ammonia is formed by combining nitrogenand hydrogenin a 1:3 ratio, as shown in the balanced chemical equation:

N₂ + 3H₂ → 2NH₃

To determine the amount of nitrogen needed to form 1.4 mol of ammonia, follow these steps:

1. Identify the stoichiometry of the reaction: 1 mol N2 reacts with 3 mol H2 to produce 2 mol NH3.
2. Divide the desired amount of ammonia (1.4 mol) by the stoichiometric coefficient of ammonia (2 mol): 1.4 mol / 2 mol = 0.7.
3. Multiply the result (0.7) by the stoichiometric coefficient of nitrogen (1 mol): 0.7 x 1 mol = 0.7 mol.

Therefore, you need 0.7 mol of nitrogen to form 1.4 mol of ammonia.

To know more about balanced chemical equation click on below link:

https://brainly.com/question/28294176#

#SPJ11

The volume of a sample of gas is 2.8 L when the pressure is 749.5 mm Hg and the temperature is 31. 2°C. (c) 480°C is the new temperature in degrees Celsius if the volume increases to 4. 3 L and the pressure increases to 776.2 mm Hg

Using the combined gas law:

(P1V1) / (T1) = (P2V2) / (T2)

Where:

P1 = 749.5 mm Hg

V1 = 2.8 L

T1 = 31.2 + 273.15 = 304.35 K (temperature converted to Kelvin)

P2 = 776.2 mm Hg

V2 = 4.3 L

T2 = ?

Solving for T2:

T2 = (P2V2T1) / (P1V1)

T2 = (776.2 mmHg * 4.3 L * 304.35 K) / (749.5 mmHg * 2.8 L)

T2 ≈ 758 K

Converting T2 back to Celsius:

T2 = 758 K - 273.15 = 484.85°C ≈ 480°C

Therefore, the new temperature is approximately 480°C.

To know more about the combined gas law refer here :

https://brainly.com/question/30458409#

#SPJ11